E40V14B AU

40" Full HD LEDTV

Table Of Contents

Preparations Guide

Safety Information..........................................................................................................................2

Important Safety Precautions..........................................................................................................3

Installed And Connected TV

TV Bracket assemble......................................................................................................................4

TV Buttons And Terminal Interface.................................................................................................5

External device connection diagram...........................................................................6

Install And Connect TV....................................................................................................................7

TV Stand installation Instructions...............................................................................7

Remote Control........................................................................................................8

Function Description

Picture Menu...................................................................................................................................9

Sound Menu.................................................................................................................................10

TV Channel.................................................................................................................................. 11

Feature Menu...............................................................................................................................13

Setup Menu.................................................................................................................................. 14

Multimedia

Photo............................................................................................................................................ 16

Music............................................................................................................................................ 16

Movie............................................................................................................................................ 17 eBook........................................................................................................................................... 17

Other Features

EPG..............................................................................................................................................18

PVR.............................................................................................................................................. 19

Other Information

Help.............................................................................................................................................. 23

Specifications............................................................................................................................... 24

This user manual for reference only

-1-

Safety Information

High voltages are used in the operation of this product to reduce the risk of electric shock,do not remove cover of the cabinet, refer servicing to qualified service personal

If the TV any changes or coarse adjustment, electric shocks to be hurt, do not attempt to open a machine-maintenance, customer contact centres needed overhaul.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating in the literature accompanying the appliance.

Warning

The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

-2-

Important Safety Precautions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer ’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and third grounding prong. The wide blade or third prong are

provided for your safety. When the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used caution when

moving the cart/apparatus combination to avoid injury tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods

of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped. Warning to reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture.

15. The apparatus shall be disconnected from the mains by placing the power/standby

switch in the standby position and unplugging the power cord of the apparatus from

the AC mains receptacle.

16. The socket-out shall be installed near the equipment and shall be easily accessible.

17. This product should never be placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the manufacturer's instructions have

been adhered to.

18. Apparatus shall not be exposed to dripping or splashing.

19. Do not place any sources of danger on the apparatus (e.g. liquid filled objects,

lighted candles).

20. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling

only as recommended by the manufacturer.

21. Never place the TV, remote control or batteries near naked flames or other

heat sources, including direct sunlight. To prevent the spread of fire, keep

candles or other flames away from the TV, remote control and batteries at

all times.

22. The USB terminal should be loaded with 0.5 A under normal operation.

-3-

TV Bracket assemble

Fix the TV on the wall

1.First,put the TV on the table smoothly and put some soft cloth on the table to avoid

scratching the screen.

2.User the screw driver to take off the screws which are fixed on the bottom stand

(the direction of the arrow, refer to the ptoto1).And take off the bottom stand(please

take off the screws and bottom stand carefully).

3.Make one bracket which can fix on the wall according to the size of arrow direction

of photo2 and photo3.

4.Drill four holes properly on the wall (the size only for reference) and put into four

screws.(optional parts) Drill four holes properly on the wall (the size only for reference)

and put into four screws.(optional parts)

5.according to the step 4,use the screwdriver to lock the screw on the back of the TV.

then hang the TV on the wall.

1 2

3 4

Note:

1.The bracket fixed on the wall is optional part.

2.when you assemble the TV, there should be no other articles on the around and front

and please keep the distance from other articles.

3.When assemble the TV, please ask the career man to fix in order to avoid the danger.

4.The fixing picture is only for reference.

5.Please follow the user manual about bracket assemble to fix the TV.

6.Attach the mounting bracket from the VESA compatible wall mounting kit.

-4-

TV Buttons And Terminal Interface

TV Buttons

Note: The following is only functional schematic, And the actual position and

arrangement of different models may be different.

:Turn ON/OFF Power.

SOURCE :External Signal Input Selection.

MENU :Display Main MENU And Confirm MENU Item Selection.

CH+/:Selecting Channel.

VOL+/:Adjusting Volume.

Terminal Interface

Note: The following are the various terminal interface, the actual position and

arrangement, the number of different models may be different.

VIDEO

INPUT

R L

AV input

External AV Signal Input And

Relevant Rith/Left Sound Channel

EARPHONE output

When earphones are plugged in, speakers are disabled

USB input

Connect a USB device here to play its media files or to recordprograms via the PVR function.

COAXIAL

Y

INPUT

Pb Pr

HDMI

COAXIAL

Connect the SPDIF receiver.

Y Pb Pr input

Connect to the composite terminal of

your DVD/VCR

(Some models without this interface)

HDMI input

Digital signal input from HDMI video connector.

ANT 75

Connect the antennal/cadle tv input

(75/VHF/UHF)

VGA input

PC analog signal input

PC AUDIO INPUT

VGA input and audio input when VGA

input

-5-

External device connection diagram

DVD Set-top boxes

HDMI

HDMI input connection

HDMI

VIDEO

INPUT

R L

AV input connection

AV input connection

VIDEO

OUTPUT

R L

AV output connection

Y

INPUT

Pb Pr VIDEO

INPUT

R L

AV input connection

USB connection

Set-top boxes

SCART connection

TV connection

-6-

Install And Connect TV

Set your TV

To put your TV in a firm place which can bear the weight of the TV.

To avoid danger, please don’t expose the

TV near water or heating place (such as light, candle, heating machine),do not block the ventilation at the back of TV.

3 Connect antenna and power

1.Connect the antenna cable to the antenna

socket on the back of the TV.

2.To plug the power cord of TV (AC 100-

240V~ 50/60Hz).

Turn on TV

3.Press the power button of the TV the

indication light will turn to green. if it is

on standby mode (the light is red),press

the power button on the remote control

to turn on the TV.

2

FM ANT TV ANT

TV signal output

1

Note:

Picture for reference purposes only.

Please prevail in kind

TV Stand Installation Instructions

1.

Open the carton and remove the TV

and scattered accessories and base

(some models without base).

2.to avoid the injury of the TV, covered

with a soft mattress, put it on the table, face

down on a soft mattress, the base of the

neck is fixed on the TV with screws.

3.screw the base and connected to the TV.

4. the installation is complete.

Note:

Picture for reference purposes only.

Please prevail in kind

-7-

1

3

2

4

Remote Control

Remote Control Key Functions

Power button

Toggles the unit between standby and on.

Numerical buttons

Press 0-9 to select a TV channel directly when watching TV. The channel changes after 2 seconds or press “OK” button to change immediately.

Press to return to previous channel.

Press to go back to the root menu under DVD mode.

FAV button

In TV mode, press FAV button to display your favorite programs.

SLEEP button

Press to activate sleep timer.

PAUSE button

Press to pause the current picture, press again to resume.

ASPECT button

Press to change the aspect ratio of the TV display.

MENU button

Press to display the main menu.

SOURCE button

Press to display the main menu.

EXIT button

Exit most menu to default status directly.

Press to quit all menu.

EPG button

Open or close EPG menu.

Navigation keys ( OK)

Allows you to navigate the on screen menus and adjust the system settings to your preference.

Press OK in DTV mode to display channel list.

REC / SETUP button

Press to record program to memory storage.

Press to open the setup window of DVD.

REPEAT

In media source, press to repeat 1 / All or off.

For DVD, user can choose REP Chapter, REP

Title and REP ALL.

TSR

Press to delay the process of program broadcasting.

Has the function of timeshift under DTV mode.

US B/ SD

The TV wi ll change into US B mo de by pressing

the bu tton.

T / R bu tton

In DT V mo de, press to sw itch be twe en radio and DT V ch annels.

D. DI S bu tton

Press to di splay the DV D informa tion un der

DV D mo de.

A- B bu tton

Enables yo u to repeat a se lected se ction from the di sc.

GO TO bu tton

Set the pl ay time during DV D pl ayback.

Note:

-8-

MUTE button

Press to mute the sound. Press again or press

VOL+/- to resume.

P.MODE button

Press to select preset picture mode.

S.MODE button

Press to select preset sound mode.

SUBTITLE button

In DTV mode, press to change subtitle on / off.

Has related functions under DVD mode as well as movie playback under MEDIA mode.

I-II / AUDIO button

Press to select sound output mode.

INFO button

Press to display the information of current system programme.

VOL+/-

Press to increase / decrease the sound level.

CH

Selects a programme in DTV / ATV mode.

PBC / TITLE button

Press to go back to the main menu during disk playback.

PVR.L

Press to display the recorded program list.

Has the function of program edit under DVD mode.

CANCEL button

Only available in interactive application, TEXT menu and Music source.

To eject the disk under DVD mode.

TEXT button

On / Off the teletext.

button

Press to playback or pause the program.

D / A button

Switch directly between ATV and DTV.

Slow playing the disk under DVD.

REVEAL

Display hidden Text characters.

button

Press to fast reverse playback.

SUB. PAGE

Prompt the user to enter a subcode for the Text page.

button

Press to fast forward playback.

HOLD button

Stop refurbish Text current page.

button

Press to stop media play or DVD playback.

Under DTV mode, press it to stop program recording.

INDEX button

Teletext index page.

button

Press to return to previous chapter or track.

TXT. Size

Toggles the text size display between half top page, half bottom page and normal.

button

Press to skip to next chapter or track.

Function Description

Picture Menu

Press MENU button to display the main menu.

Press OK button select Picture in the main menu. then press OK button to enter

1.Press UP/DOWN button to select the option that you want to adjust in the Picture menu .

2.Press OK button to enter , then press UP/DOWN button to adjust.

3.After finishing your adjustments, Press MENU/OK button to save and return back to the

previous menu.

Picture Mode

Available Picture Mode: Dynamic, standard, mild, user

Note: You can press P.MODE

button to change the Picture Mode directly .

Brightness/Contrast/sharpness /Color/Tint

The above function can only be adjusted when you setting picture mode in user pattern.

Brightness Adjust the optical fiber output of the entire picture, it will effect the dark

region of the picture.

Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is

invariable.

Sharpness Adjust the peaking in the detail of the picture.

Color Adjust the color of the color based on your own like .

Tint It is not available unless Picture Mode is set to be user and the current TV

system is NTST.

Color Temperature

Chang the overall color cast of the picture.

Aspect Ratio

Change the overall color cast of the picture .

Note: You can press ASPECT button to change the Picture Mode directly.

Noise Reduction

Noise reduction of the picture .To reduce noise and improve the appearance of the picture. No noise reduction operation if it’s “off” .

From Low- Middle- High, noise reduction effects better but it will cause a blur on picture.

-9-

Function Description

Sound Menu

Press MENU button to display the main menu.

Press UP/DOWN button select Sound Menu in the main menu. then press OK button to enter.

1.Press

UP/DOWN button to select the option that you want to adjust in the Sound menu.

2.Press OK button to enter, then Press UP/DOWN button to adjust.

3.After finishing your adjustments, Press MENU/OK button to save and return back to the

previous menu.

Sound Mode

Available Picture Mode: Standard, Movie ,Speech ,User.

Note: You can press S.MODE

button to change the Picture Mode directly .

Treble/Bass

When setting sound model into User pattern ,these two functions can be adjusted.

Treble Adjust the treble effect . Increases or decreases high-pitched sounds.

Bass Adjust the bass effect. Increases or decreases lower-pitched sounds.

Balance

Adjust the balance between left and right speakers to adapt to your listening position.

Surround

Press OK button to enter, then press UP/DOWN button to select On or Off.

AVL

Press OK button to select On or Off. Set the auto volume control.

SPDIF

Press OK button to enter, then press UP/DOWN button to select Off/Auto/PCM.

-10-

Function Description

TV Channel

Press MENU button to display the main menu.

Press UP/DOWN button select Channel Menu in the main menu. Then press OK button to enter.

1.Press UP/DOWN button to select the option that you want to adjust in the Channel Menu.

2.Press OK button to enter .Then press UP/DOWN button to adjust.

3.After finishing your adjustments. Press MENU/OK button to save and return back to the

previous menu.

NOTE: TV Connection The functions of the parts not change please in kind prevail.

Channel Management

To manage (Delete/Rename/Swap/Lock/Skip) all channels.

First press UP/DOWN to highlight the channel you want to delete or move or skip. Then:

Press the RED button to delete the channel.

Press the GREEN button lock the selected channel.

Press the YELLOW button to skip the selected channel.

(Your TV set will skip the channel automatically when using CH+/- to view the channels.)

Press the BLUE button to be swapped channel. Then press UP/DOWN to select another channel and press BLUE key to swap them.

-11-

Function Description

Favorite Management

To manage( Add/Delete) Favorite channels

Press UP/DOWN button to select the programs to be added into favorite list and press

“ RED ”,” GREEN ”, ” YELLOW ” or “ BLUE ” button to mark them.

Country

Press UP/DOWN button to select Country.

Auto Search

All Mode : Select “All” item to scan all digital channels carried by current signal

mode firstly and then switch to scan all analog channels in selected

country automatically. User can skip digital search to analog search

directly by entering EXIT/MENU button and can also stop auto scan

directly by entering EXIT/MENU button during analog scanning.

Digital Mode ： Select “digital” item to search all digital channel in selected country

carried by current signal mode. User can stop search directly by entering

EXIT/MENU button.

Analog Mode : Select “Analogue” item to search all digital channels in selected country

carried by current signal mode. User can stop search directly by entering

EXIT/MENU button.

-12-

Function Description

DTV Manual search

Select channel number by UP/DOWN button or entering number directly. The strength and the quality shows at the bottom .Press OK button on “Start” item to start current channel search .The manual searching UI and the auto searching UI are the same.

ATV Manual Search

Press UP/DOWN button to select option .Press OK button to enter. Press UP/DOWN button to select these parameters. Select ”Search” item to enter analog channel tune, then press OK button to adjust.

Feature Menu

Press MENU button to display the main menu.

Press UP/DOWN button to select Feature Menu in the main menu. Then press “ OK ” button to enter.

1.Press UP/DOWN button to select the option that you want to adjust in the Feature menu.

2.Press OK button to enter, then press UP/DOWN button to adjust.

3.After finishing your adjustments. Press OK button to save and return back to the

previous menu.

-13-

Function Description

Lock

Lock Channel : On: turn on Lock Channel. User need to enter password to watch the

channels which are locked. Also need to enter password when

user tries to change setting in items like “reset system”/ “reset

databass” etc.

Off: turn off Lock Channel

Parental Lock : Parents can set age limit level through this function.

Change Pin Code : Press OK button to set New Password, then enter a 4- digital number

you want to set twice.

Pass word : 0000

Language

Press UP/DOWN button to select Language. Press OK button to enter , then to select

System language setting, including OSD Language, Preferred Subtitle, Preferred Audio,

Digital Teletext Language, Anglog Teletext Language.

Clock

It is used to check out the current system time and set time zone/DST (daylight saving

time ):if it’s “ON” ,It’ll be an hour earlier than the GMT. If Time Zone is set to “AUTO” it’s not available.

Sleep Timer

When your TV is Running, start sleep function by setting Sleep Timer in any cast. This function allows you t power off the TV within a period of time. Currently the supported time period are:Off,10 Mins,20 Mins, 30 Mins,60 Mins,90 Mins,120 Mins,180 Mins,240 Mins.

Auto Power Off

When your TV is Running ,start Auto Power Off function by setting Auto Power Off Timer

in any case .This function allows you to power off the TV within a period of time. Currently

the supported time period are: Off,1 hour,2hours, 4hours.

Hearing impared

This function offers a subtitle such as a “stroke on the door” or “the bell starts to ring” for the current scene in case that the user is weak in hearing.

PVR/Time shift

You will be well informed this function in PVR part, which was shown at the end of this user manual.

Setup Menu

Press MENU button to display the main menu.

Press UP/DOWN button to select Setup Menu in the main menu .then press OK button to

enter.

-14-

Function Description

1.Press UP/DOWN button to select the option that you want to adjust in the setup menu.

2.Press OK button to enter, then press UP/DOWN button to adjust.

3.After finishing your adjustments press MENU/OK button to save and return back to the previous menu.

OSD Timer

Set up OSD Timer which means how long the menus will exist. The optional periods are

5,10,15,20,25,30 Seconds and Never.

PC Setup

It is only available in PC source.

Auto Adjust : Auto adjust the H Position, V Position, Phase, Clock

H Position: Manually adjust H Position

V Position: Manually adjust V Position

Phase: Manually adjust Phase

Clock: Manually adjust Clock

Blue Screen

It is not available in PC,DTV source or when it is not movie mode in multimedia source .In

TV source, if there is no signal and Blue Screen is Off, it will show snow; if there is no signal and Blue Screen is On, It will show blue screen.

Home Mode

Press UP/DOWN and highlight this function and then press OK to adjust it into standard,

dynamic or home mild mode

Reset to Setting

If the Lock Channel is On in Feature Menu/Lock, it need s to enter the password to enter the Reset. It will Reset .It will Reset System Setting and Database. When the reset is complete ,it will enter the Auto Installation settings page.

Software Upgrade

Software upgrade by bin code. Put the bin code into the root directory of the media and media plugged into the TV’S USB interface ,press ENTER key to upgrade. Don’t power off during the upgrading process. The system will restarts when the upgrading process is done .

-15-

Multimedia

Press SOURCE button and then press UP/DOWN to choose Media.

Plug in a Media on TV, then you can enjoy photo ,movie and eBook through your Media on

TV.

Photo

Press LEFT/RIGHT button to select PHOTO in the main menu, then press OK button enter photo page.

Music

Press LEFT/RIGHT button to select Music in the main menu, then press OK button enter music page .

-16-

Multimedia

Movie

Press LEFT/RIGHT button to select Movie in the main menu ,then press OK button enter

Movie page.

eBook

Only txt format eBook is supported.

Press LEFT/RIGHT button to select eBook in the main menu, then press OK button enter eBook page.

-17-

Other Features

EPG

If you expect to know the schedule or the information of the current playing program or the program that starts in the near future, you can refer to the EPG menu by pressing the button “EPG” on the remote. It shows the date and time on the top right of the menu, the list of the current available channels on the left side of the menu, and the name of each program that starts in a scheduled period of time on the right of the menu, you can also choose the highlighted program and press OK button to check the detail information of or “left” , or the focused program by pressing “up” or “down”. The information of the currently focused program will be displayed on the top of the menu.

There are 2 modes available under EPG, which are the daily mode and weekly mode. you can press red button to switch from daily mode to weekly mode. Press green button

2 times to record the program you choose. Press yellow button to scan previous day program and blue button to check the next day program.

Daily Mode

Display the information of the programs that start in a scheduled period of time in the current channel. It includes name, start time ,end time, short content description , current date/time, etc.

If the current focusing program is not parental locked ,it will be played simultaneously in the background.

Weekly Mode

Display the information of the programs that start in a scheduled period of the in the current channel .It includes name, start time ,end time, short content description ,current date/time, etc.

Focusing on different channels on the left, it displays corresponding programs in schedule of time.

If the current focusing program is not parental locked ,it will be played simultaneously in the background.

-18-

Other Features

PERSONAL VIDEO RECORDING (PVR)

You can record current and upcoming programs using a USB device. However, this is only available for digital channels. Please plug in the USB device before executing recording function and as well do the following settings to save the file recording.

1.Format USB Recording Devices

Menu-> Feature->PVR/Timeshift->Partition Select to enter partition list:

Then press red button on the remote control to format USB recording device, once format has been successfully done, it will pop up a dialogue box as shown below.

Warm Tips:

When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. Be sure to back up important files before recording. We will not be responsible for any data loss.

2.Recording Programs

Instant Recording

You can record the program you are watching. Press REC on the remote to start the recording.

Recording icon and recording time will be displayed at the left bottom of the Screen.

Press STOP button to stop the recording.

Schedule Recording

2.1 Press EPG to enter EPG weekly mode, the screen is shown on the first picture. Then

you can use Navigation button to check the program schedule on the right side of the

screen, which was presented on the second picture. Then please highlight the

program you preferfor schedule recording and press green button two times

until- R-shown on the screen to prerecord, which was shown on picture 3.

2.2 You can also press red button on the remote control to switch EPG from weekly mode

to daily mode. Press yellow button to scan previous day program and blue button to

check the next day program. You can at most schedule recording for 10 programs.

Please note that current programs are not available for schedule recording.

-19-

Other Features

2.3 You can check the recorded program through Menu>Feature>PVR/Timeshift>Timer

to checkthe detail information of recorded program and make minor modulation.

-20-

Other Features

* Press red button to delete one program you choose

*Press green button to delete all of program you scheduled

*Press yellow button to add new schedule recording program, then dialogue box would be popped up as shown below, please note that set the recorder as ON and Type as DTV.

Then make adjusting about time and press menu button to save

Time shift Recording

You can delay the process of broadcasting programs under time shift recording. The maximum time of time shift recording is 2 hours.

Please press TSR button on the remote control to enter. A dialogue box would pop up, please choose OK. Press TEXT button to start time shift recording and press TEXT again to play time shift recording. Press hold button to exit time shift recording.

Please note that USB device will not store the recording program under time shift recording mode.

-21-

Other Features

3.Playing and deleting recording programs

Please press PVR.L button on the remote control to enter record list, then choose the program you want and press OK button to playback, you can press hold button to back to record list. Press red button to delete the programs.

-22-

Help

-23-

machine Technical Specifications

Screen Size

TV system

Video system

Preset Channels

Input/Output

Speaker Output

Power requirement

Power consumption

PAL/SECAM

PAL/NTSC

ATV:100, DTV:1000

Input: TV, AV, Y Pb Pr, PC, HDMI1,HDMI2,HDMI3,USB

Output: COAXIAL, EARPHONE OUT

8 10W+10W

AC 100-240V~, 50/60Hz

70W

Accessories User's manual Remote controller 2 x AAA Batteries

NOTE ：

This user manual is for reference only. Specifications are subject to change

without notice.

-24-

MD140702 01