Setup Menu. Soniq E40V14B

Function Description

Lock

Lock Channel : On: turn on Lock Channel. User need to enter password to watch the

channels which are locked. Also need to enter password when

user tries to change setting in items like “reset system”/ “reset

databass” etc.

Off: turn off Lock Channel

Parental Lock : Parents can set age limit level through this function.

Change Pin Code : Press OK button to set New Password, then enter a 4- digital number

you want to set twice.

Pass word : 0000

Language

Press UP/DOWN button to select Language. Press OK button to enter , then to select

System language setting, including OSD Language, Preferred Subtitle, Preferred Audio,

Digital Teletext Language, Anglog Teletext Language.

Clock

It is used to check out the current system time and set time zone/DST (daylight saving

time ):if it’s “ON” ,It’ll be an hour earlier than the GMT. If Time Zone is set to “AUTO” it’s not available.

Sleep Timer

When your TV is Running, start sleep function by setting Sleep Timer in any cast. This function allows you t power off the TV within a period of time. Currently the supported time period are:Off,10 Mins,20 Mins, 30 Mins,60 Mins,90 Mins,120 Mins,180 Mins,240 Mins.

Auto Power Off

When your TV is Running ,start Auto Power Off function by setting Auto Power Off Timer

in any case .This function allows you to power off the TV within a period of time. Currently

the supported time period are: Off,1 hour,2hours, 4hours.

Hearing impared

This function offers a subtitle such as a “stroke on the door” or “the bell starts to ring” for the current scene in case that the user is weak in hearing.

PVR/Time shift

You will be well informed this function in PVR part, which was shown at the end of this user manual.

Setup Menu

Press MENU button to display the main menu.

Press UP/DOWN button to select Setup Menu in the main menu .then press OK button to

enter.

-14-

Function Description

1.Press UP/DOWN button to select the option that you want to adjust in the setup menu.

2.Press OK button to enter, then press UP/DOWN button to adjust.

3.After finishing your adjustments press MENU/OK button to save and return back to the previous menu.

OSD Timer

Set up OSD Timer which means how long the menus will exist. The optional periods are

5,10,15,20,25,30 Seconds and Never.

PC Setup

It is only available in PC source.

Auto Adjust : Auto adjust the H Position, V Position, Phase, Clock

H Position: Manually adjust H Position

V Position: Manually adjust V Position

Phase: Manually adjust Phase

Clock: Manually adjust Clock

Blue Screen

It is not available in PC,DTV source or when it is not movie mode in multimedia source .In

TV source, if there is no signal and Blue Screen is Off, it will show snow; if there is no signal and Blue Screen is On, It will show blue screen.

Home Mode

Press UP/DOWN and highlight this function and then press OK to adjust it into standard,

dynamic or home mild mode

Reset to Setting

If the Lock Channel is On in Feature Menu/Lock, it need s to enter the password to enter the Reset. It will Reset .It will Reset System Setting and Database. When the reset is complete ,it will enter the Auto Installation settings page.

Software Upgrade

Software upgrade by bin code. Put the bin code into the root directory of the media and media plugged into the TV’S USB interface ,press ENTER key to upgrade. Don’t power off during the upgrading process. The system will restarts when the upgrading process is done .

-15-