Rollei Multi media digital picture frame Pictureline PL 4200 Operation Instuctions
Add to My manuals12 Pages
advertisement
Cautions
Precautions and maintenance
● For indoor use only
● To avoid risk of fire or electric shock, do not expose the unit to moisture or condensation.
● To avoid overheating, do not block the ventilation holes on the back of the Digital
Photo Frame.
● Keep the Digital Photo Frame out of direct sunlight.
● Do not dismantle the Digital Photo Frame. There is a risk of electric shock and there are no user-serviceable parts inside. Dismantling the Digital Photo Frame will void your warranty.
Cleaning the LCD Screen
● Treat the screen carefully. Because the screen of the Digital Photo Frame is made of glass and it would easily be broken or scratched.
● If fingerprints or dust accumulate on the LCD screen, we recommend using a soft, non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
● Moisten the cleaning cloth with the cleaning solution and apply the cloth to the screen.
WARNING:
Please power off the unit before inserting or removing a card or USB device.
Failure to do so may cause damage to the card/USB and the unit.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
This device is designed for privat use only!
1
Introduction:
Thank you for your purchase of the Digital Photo Frame. It is designed to allow quick and easy view of photos taken from your digital camera, mobile phone, or from a memory storage card. Please read this User Manual carefully to learn the correct way to use the
Digital Photo Frame.
Features:
1. Support picture format ： JPEG ,BMP
2. Support audio format: MP3 (8-48 KHz, 8-320 Kbps),
WMA (22-48 KHz, 5–320 Kbps)
3. Support video format: Avi, Mov, MPEG4 (max. 720x576, 30 fps)
M-JPEG (max. 1280x720, 30 fps)
4. Support Memory card: SD/SDHC/ MMC/MS.
5. USB connection: USB 2.0 .
6. Built-in flash memory with about 3Mb storage.
7. Support viewing pictures in thumbnail mode
8. Built-in clock, alarm and calendar with slideshow window.
9. Support Copy files to memory and delete files in the built in memory and cards.
10. Image-display mode: slideshow, preview, zoom, rotate function.
11. Adjustable slideshow speed and above 10 kinds of transition slideshow
12. Adjustable brightness, contrast, saturation
13. Built-in stereo speaker (2x1W) and earphone jack
14. The digital photo frame can stand horizontally or vertically.
15. OSD language: German, English, French, Spanish, Portuguese, Italian, Greek,
Turkish, Hungarian, Polish, Russian, Danish, Swedish, Norwegian, Finnish, Dutch
Packaging Check List:
3. Remote control
5. Warranty card
6. Bracket
1 pie ce
piece
1 piece
piece
1 piece
1 piece
2
CONTENTS
3
1. Product Diagram
1.1 Remote Control
1) POWER ─ Switch On/Off.
2) MUTE ─ Press Mute button to silence the voice temporarily.
3) COPY&DEL ─ Enter copy & delete interface
4) RETURN ─ Return to upper page
5) ─ Functional selection button from right to left cursor
6) ─ Functional selection button from left to right cursor
7) SETUP ─ Go directly to Setup mode
8) SLIDESHOW ─ Press to start slideshow directly
9) VOL- ─ Turn down the volume
10) ZOOM ─ In pause state of single picture mode, press to magnify picture display size
11) MUSIC ─ Press to enter music interface
12) ROTATE ─ In pause state of single picture mode, press to revolve the picture 90° in clockwise every time
13) MAIN ─ Press to enter main menu interface
14) ─ Functional selection button from the bottom to the top cursor
15) OK ─ Press to confirm. Play/pause: In the playing mode, press this button, it will pause; repress this button, it will play again
16) ─ Functional selection button from the top to the bottom cursor
17) VOL + ─ Turn up the volume
18) VIDEO ─ Press to enter video interface
4
1.2 Rear of Frame
1. Power on/off
2. PREVIOUS/UP
3. Play/Pause/OK
4. Right
5. Left
6. NEXT/DOWN
7. Menu/Exit
1.3 Right Side of Frame
1. SD/SDHC/MMC/MS CARD
2. EARPHONE JACK
3. USB
4. DC IN
2. Installing & Replacing the Battery
If you need a new battery, please refer to the following.
Place the upside of the remote control down, press down on the ridged area of the battery cover and pull towards you to remove the tray. Place one CR2025 lithium button-cell battery on the tray with the positive“+”side facing you. Reinsert the tray.
3. Getting Started
3.1 Plug one end of the included AC adapter into a standard 110-240V AC electrical outlet and the other end into the DC in of the frame.
3.2. Remove the protective film covering the LCD.
3.3. Remove the plastic battery insulator from the battery compartment and make sure
5
the remote control has a battery inside. Please refer to “Installing & Replacing
Battery” if you need a new battery.
3.4. Power on the unit by pressing the Power button on the remote control.
4. Operating Instruction
When the frame is switched on for the very first time, a menu for the selection of the default language appears. Please select the desired language and confirm with the " OK "-Button.
To open the "Language-Selection" again, please use the " Reset Setting”
Function in the Menu " Set Up ".
After turning on the unit, it will show the startup picture, than slideshow will automatically play pictures from the built-in memory when there is no card insert. If there is a card or USB device, it will slideshow pictures from the card or USB.
4.1. Card and USB
Press RETURN 3 times, it will show the card select interface ， built in memory,
USB and SD/SDHC/MMC/MS card.
6
It supports SD/SDHC/MMC/MS and USB
2.0. After inserting a card or USB device, slideshow will play automatically, then press RETURN twice to access to main menu.
Note: Make sure there are supported files in the Card or USB device.
5. Picture Mode
In main menu, highlight Photo , press OK to start slideshow. Then press RETURN to access to thumbnail mode , use to choose the picture you want to display, press OK to confirm.
Note: When picture is in slide show mode, press OK to change picture display to Slide show + Music 、 Browse Mode or Photo Slide show
Press SLIDESHOW to start slideshow pictures in single window or multi screen mode.
Change slide mode as described: press
SETUP to choose Photo Setup , then choose Slide Mode , Select single window/two windows/ Triple windows/ four windows with , press OK to confirm.
7
5.1.Copy & Delete function
Copy pictures to built-in memory ： in thumbnail mode of Card/USB, use
to highlight the picture you want to copy to built-in memory, press COPY DEL to enter Copy/Delete interface, use to select Copy to internal , press OK to confirm.
Please note , the internal memory can only store 3 -5 Pictures, depending on the size of the pictures.
Delete pictures in built-in memory or memory card ：
In thumbnail mode of Built-in memory, use
to highlight the picture you want to delete, press COPY DEL to enter
Copy/Delete interface, use to select
Delete files , press OK to confirm.
6. Music Mode
Press RETURN to choose memory card in the main menu. Highlight Music , press OK to access the music mode, or press MUSIC directly on the remote control, press to select the music from the playlist and press OK to confirm.
Press VOL+/ to turn up/ down the volume .
8
7. Video Mode
8. Calendar
9. File
Press RETURN to choose memory card in the main menu. Highlight Video , press OK to access the video mode, or press VIDEO directly on the remote control, press to select the video from the playlist, then press OK to confirm.
Press VOL+/ to turn up/ down the volume .
Select Calendar from the main menu, press OK to enter, the calendar is displayed and any photos on the connected memory are shown as a slideshow to the side. Browse the calendar by using .
Select File , then press OK to access to file interface. In this mode, you can browse all the picture files and folders in the memory card or the built-in memory.
9
Copy/Delete Function
In file interface, use to select the file you want to Copy or Delete, press COPY DEL to enter Copy/Delete interface, use to select Copy to internal or Delete files , press OK to confirm.
10. Setup
Select Setup from main menu, press
OK to access to Setup interface. Use
to select the item you want to set up. Press OK to show the sub menu, select items with ., then press OK to confirm.
10.1 Photo Setup
10.1.1 Display Mode: Slide show + Music 、 Browse Mode or Slide show Only
10.1.2 Music: Press to choose on/off
10.1.3 Display Ratio: Optimal, Full, Auto fit
10.1.4 Slideshow Speed: 3/5/15/30seconds, 1/5/15minutes
10.1.5 Slideshow repeat: Circular, Single
10.1.6 Slideshow effect: Random, Snake, Partition, Erase, Blinds, Random lines, Grid,
Cross, Spiral, Rect., Close,
10.1.7 Slide Mode: single window, two windows, Triple windows, four windows.
10.1.8 Photo play sequence: Sequence,Random
10.2 Calendar Setup
10.2.1 Date: Press OK , then use to select setup items, then use to set
Month, Day, Year, press OK to confirm
10.2.2 Set Time format: 12/24 , Press to set, use OK to confirm
10.2.3 Clock Time: Press OK, press to select setup items, then use to set
Hour, Min, press OK to confirm
10.2.4 Alarm Status: press to choose on/off
10.2.5 Alarm Time: Press OK, press to select setup items, then use to set
10
Hour, Min, press OK to confirm
10.2.6 Alarm Tone: press to choose Alarm 1 2 or 3
10.2.7 Alarm Frequency: Once, Everyday, Mon. to Fri., Weekend
10.3 Video Setup
10.3.1 Display Mode: Full screen, Original Size
10.3.2 Play Mode: Circular, Single,Random
10.4 Music Setup
10.4.1 Play Mode: Single, Single repeat, Circular, Random
10.5 System Setup
10.5.1 Language: German, English, French, Spanish, Portuguese, Italian, Greek,
Turkish, Hungarian, Polish, Russian, Danish, Swedish, Norwegian, Finnish, Dutch
10.5.2 Brightness: Use to select from 01 (lowest) to 16 (highest)
10.5.3 Contrast: Use to select from 01 (lowest) to 16 (highest)
10.5.4 Saturation: Use to select from 01 (lowest) to 16 (highest)
10.5.5 Start up mode: Video, Calendar, Main menu, Photo, Music
10.5.6 Volume: Use to select from 01 (lowest) to 10 (highest)
10.5.7 Reset Setting: Press OK to confirm
10.5.8 Version: Check version
10.5.9 System Upgrade: Press OK to Start FW upgrade.(Need to use Firmware)\\
11. Stand Instruction
Screw the bracket into the slot of the digital photo frame, rotate the bracket until it is locked in place. The digital photo frame can stand horizontally or vertically. Please refer to the illustration shown below.
11
12. Technical Specifications
Adapter:
Input: AC 100-240V 50/60HZ 350mA
Output: DC 5V/1.5A
Picture Format: JPEG ,BMP
Video Format: MPEG1,MPEG2, MPEG4 （ Divx4.0,Divx5.0, Xvid ） AVI, M-JPEG and MOV
Memory card: SD/SDHC/ MMC/MS.
USB connection: USB 2.0 & Mini USB
Screen Parameter:
Screen Size: 10.1 inch TFT
Resolution ： 1024X600 Pixels
Aspect Ratio: 16 ： 9
Contrast: 500:1
Brightness: 200 cd/m2
Response Time: 20ms
Viewing Angle: 60°(left/right/vertical), 40°(horizontal)
Working Temperature: 0 ℃ ~40 ℃ , Humidity: 10-85%
13. Troubleshooting Guide
If you have problems with your player, please consult both this guide and manual.If you need further assistance, please contact Technical Support.
No power:
Please check whether the plug is inserted correctly.
Remote control no function:
Please check whether the battery has power (the battery can be used for half a year in normal conditions). Replace with new battery if necessary.
Can not read the CARD or USB:
Please confirm whether there is storage in the card or USB device.
Empty devices cannot be read.
Can not play the file:
Please confirm if the file format is compatible with the player.
Display too bright or too dark:
Please adjust the brightness or contrast in the setup menu.
The color is light or no color:
Please adjust the color and contrast setup.
No sound:
Please check whether the volume is correct and the player is not in Mute mode.
12
advertisement
Related manuals
advertisement