Outdoor Omni 4G/LTE 7dBi Antenna

TELECOMM

Product Code: AABOLTE

Barcode: 600284406 5140

Outdoor omnidirectional telecommunication antenna.

Industry standard N-type female connector.

Omni Directional High Gain Telecommunication Antenna

Designed to communicate with multiple base stations. An omni directional antenna allows the “cell network” more control in managing a connection.

This antenna is designed for use with any 4G/LTE network in the 1800MHz band.

Uses

Improves the existing network signal strength and quality, to internet reliability and speed.

The antenna can only be used with a modem that has an external “cellular” antenna connector.

Antenna only, must be used with AABOC7M cable for modems with SMA antenna.

TECHNICAL INFORMATION

Frequency R ange

V SW R

Impedance

G ain

Polarization

Horizontal Beam W idth (half-power)

Max.Power

C onnector

D imension

W eight

R adome material

Mounting bracket for masts up to;

1710-1990 MHz

≤2

50 Ω

7dBi

Vertical

360 °

100W

N-Female ɸ 35X 605mm

0. 44kg

PV C

50 mm diameter

1 x Antenna

Mounting accessories included (excludes mast and cable)

PACKAGE DIMENSIONS

D

Carton

Bulk

Height Depth

(mm) (mm)

659.7

100

-

Width

(mm)

45

-

Weight

(kg)

0.44

-

QTY

1

-

www.ellies.co.za

Installation guide

Installation hints

1. Ensure antenna is placed at top of mast for best omni directional performance.

2. Test for best setup location before final installation. (A few meter can make a large difference.

3. Tilting the antenna slightly from vertical can make a large difference.

4. Keep antenna far way as possible from TV antennas to minimise interference.

5. Keep antenna connection cable as short as possible.

6. Use drip loop on the antenna cable before it enters the house to avoid water running along

cable into house.

7. Conform to applicable earth grounding regulations.

8. Use waterproof N-type connectors on antenna cable with amalgamating tape for best weather

proofing.

Connector

For dongles and STBs with either TS9 or CRC9 connectors, an antenna cable (AABOC7M) together with the correct “pigtail” adaptor cable (AABOATS9 or AABOACRC9) must be used.