Whittier Wood 2235AST AST Els Q Adj Stg Bed Assembly Instructions

Ellison Adjustable Storage Beds

AST = Astoria Sky finish

Assembly Instructions

Model #

2235AST

Ellison Queen

Adjustable Storage

Bed

IMPORTANT NOTES:



For normal household use only. Not recommended for commercial use.



Remove items before you move this unit.



Do not overload the drawers.



This assembly requires two people.

WARNING

2237AST

Ellison King

Adjustable Storage

Bed

Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the state of California to cause cancer.

Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.

For more information go to: www.p65warnings.ca.gov/wood

Thank you for allowing us to help you furnish your home. We are certain you will be delighted with your new furniture for many years to come.

This product can expose you to chemicals, including formaldehyde, which are known to the State of California to cause cancer.

For more information go to: www.p65warnings.ca.gov/furniture

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

CUSTOMER SERVICE

If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you cannot order replacement parts through your dealer, please contact our customer service department.

Hours: Our friendly customer service staff can be reached:

Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time) .

You may leave a message 24 hours a day, seven days a week.

Customer Service: 800-6533336 • Outside the U.S.: 541-687-0213

Fax: 541-6872060• Email: [email protected]

P.O. Box 2827

Eugene, OR 97402 USA

Production Code:

VN 06/18

2235AST Ellison Queen Adjustable Storage Bed

2237AST Ellison King Adjustable Storage Bed

Parts List

Please note this Assembly Instruction is for either the Ellison Queen Adjustable

Storage Bed (2235) or the Ellison King Adjustable Storage Bed (2237).

The Parts list for each headboard follows on pages 2 and 3.

Please identify the parts and check that quantities received match those on this list.

If you need to replace a part, refer to the following letter and part name.

2236AST

Ellison Queen Adjustable Headboard/Footboard Kit (x1)

Part Description Quantity

ZE

ZF

ZG

ZH

ZI

A

B

L

Y

Headboard Assembly

Footboard Assembly

#8 x 1-1/4" Black Screw

5/16" x 14mm Insert Nut (inserted)

5/16" x 2-1/4" Hex Bolt

5/16" x 35mm Hex Bolt

5/16" x 35mm Bolt (inserted)

Z Hex Wrench 5mm (attached to the right leg)

1/4" Flat Washer

6

18

4

1

24

1

1

24

12

2235AST_2237AST — Page 2 — 06/18



Parts List

2238AST

Ellison King Adjustable Headboard/Footboard Kit (x1)

Part Description Quantity

A

B

C

L

Y

ZE

ZF

ZG

ZH

ZI

Headboard Assembly

Footboard Assembly

Center Deckboard

#8 x 1-1/4" Black Screw


5/16" x 2-1/4" Hex Bolt

5/16" x 35mm Hex Bolt

5/16" x 35mm Bolt (inserted)

Z Hex Wrench 5mm (attached to right leg)

1/4" Flat Washer

1

1

1

36

12

6

18

4

1

24

2235AST_2237AST — Page 3 — 06/18

Part

D

E

F

K

L

M

N

P

G

H

I

J



Parts List

2219AST

Ellison Queen/King Pedestal Kit (x2)

Description

Pedestal

Quantity

1

Drawer Box (assembled)

Drawer Face (attached)

Left/Right Center Deckboard

20" Drawer Slides (installed)

#6 x 3/4" Philtruss Screw (inserted)

#6 x 1/2" Philtruss Screw (inserted)

#8 x 7/8" Black Lo-Profile Screw (inserted)

#8 x 1-1/4" Black Screw (inserted)

#8 x 1-5/8" Black Screw (inserted)

#8 x 1-5/8" Machine Screw Tuscan (installed)

Antique Pewter Pull (attached)

3

3

1

3 sets

18

18

18

8

24

6

3

2235AST_2237AST — Page 4 — 06/18

Part

Q

R

S

T

U

W

X

Y

ZA

ZB

ZC



Parts List

2221AST

Ellison Queen Base Kit (x1)

Description

Mitered End Support

Square End Support

Left Support

Right Support

Queen Trestle Rail (15-1/8")

#8 x 1-3/4" Pan Head Screw (inserted)

#10 x 3/4" Pan Head Screw (inserted)


Wood Dowel (inserted)

Foot Bracket (attached)

Adjustable Glide (installed)

Quantity

1

2

1

1

4

12

16

18

12

4

4

2235AST_2237AST — Page 5 — 06/18

Part

Q

R

S

T

V

W

X

Y

ZA

ZB

ZC



Parts List

2224AST

Ellison King Base Kit (x1)

Description

Mitered End Support

Square End Support

Left Support

Right Support

King Trestle Rail (31-1/4")

#8 x 1-3/4" Pan Head Screw (inserted)

#10 x 3/4" Pan Head Screw (inserted)


Wood Dowel (inserted)

Foot Bracket (attached)

Adjustable Glide (installed)

Quantity

1

2

1

1

4

12

16

18

12

4

4

2235AST_2237AST — Page 6 — 06/18





Tools Required : Phillips screwdriver, 1/2" open end or box end wrench, Tape measure and Z Hex

Wrench which is attached to the back right leg of the Headboard. See Figure 1b.

1. The Headboard for this bed is adjustable. It can be raised or lowered depending on the thickness of your mattress. The holes for adjusting the height are numbered on the back of the headboard legs. The chart below provides suggested settings based on the thickness of your mattress. It also lists the overall height of the headboard at each setting. You may choose a different setting for a variety of reasons. Individual preference, the number and thickness of pillows on your bed, or the presence of a window or artwork above the Headboard are some of the factors that might lead you to select a different setting than the one we have suggested. To adjust the setting of the headboard use the Hex wrench (ZH) provided to remove the 5/16" X

35mm Bolts (ZG) attaching the Headboard to the Legs of the Headboard. Reposition the

Headboard so that the insert nuts in the back line up to the numbered holes that correspond to the height you desire. Reinsert the bolts. See Figures 1 and 1a.

Screw Position Headboard Height Approximate Mattress Thickness Range

1 51 3/8" >16"

2

3

4

5

50 1/8"

48 7/8"

47 1/2"

46 3/8"

15-16"

13-15"

11-13"

<11"

ZG x 4

ZH x 1

ZH

ZG

ZH

Fig. 1b

Fig. 1

1

2

3

4

5

1

2

3

4

5

Fig. 1a

2235AST_2237AST — Page 7 — 06/18





2. Lay out and identify the parts from the Queen (#2221) or King (#2224) Base Kit. Set aside

Trestle Rail (U) (Queen) or Trestle Rail (V) (King) for use later in the assembly process. Use the notch and dowels on Square End Support (R) and Mitered End Support (Q) as a guide attach to the Right Support (T) using the Hex Bolts (ZE) and Washers (ZI) from the Headboard/Footboard

Kit. See Figures 2 and 2a.

ZI

ZE x 3 x 3

T

R

ZE

ZI

Fig. 2a

R

Fig. 2 Q

3. Attach the assembly to the Left Support (S) Using Hex Bolts (ZE) and Washers (ZI). See

Figures 3 and 3a. Identify the Headboard end of the assembly and place near the final bed location. See drawing below.

S

ZI

ZE x 3 x 3

ZE

ZI

Fig. 3a

Footboard

Q

R

R

Headboard

Fig. 3

2235AST_2237AST — Page 8 — 06/18





4. Place each pedestal on top of the base kit against the side of the locater blocks of the Base Kit.

See Figure 4.

D

Locater blocks

Headboard end of Base has leveler outside the crosspiece

Fig. 4

Locater blocks

2235AST_2237AST — Page 9 — 06/18





5. Open the drawers and attach the pedestal to the base using Hex Bolts (ZF) and Washers (ZI) only finger tight. See Figures 5 and 5a.

ZF

ZI

ZF x 10 x 10

ZI

Fig. 5a

Fig. 5

(Notched Deckboards removed for illustration purposes)

2235AST_2237AST — Page 10 — 06/18





6. NOTE: When attaching the Footboard to the Pedestal/Base assembly attach it at the end of the

Base with the leveler behind the crosspiece. Attach the Footboard (B), with Hex Bolts (ZF) and

Washers (ZI). See Figures 6 and 6a.

ZI

ZF x 4 x 4

Fig. 6a

ZF ZI

B

Headboard end of Base has leveler outside the crosspiece

Fig. 6

2235AST_2237AST — Page 11 — 06/18





7. Attach the Headboard (A) with Hex Bolts (ZF) and Washers (ZI). See Figures 7 and 7a.

ZI

ZF x 4 x 4

ZI

ZF

Fig. 7a

Fig. 7

2235AST_2237AST — Page 12 — 06/18





8. Once the Headboard and Footboard are attached, open all drawers and tighten Hex Bolts (ZF) and Washers (ZI) on the inside of the bed assembly.

9. Adjust levelers (ZC) only if floor is uneven or if bed has movement . See Figures 9 and 9a.

ZC

Fig. 9a

Fig. 9

(Bottom Boards removed for illustration purposes)

2235AST_2237AST — Page 13 — 06/18





10. Insert QueenTrestle Rail Supports (U) or King Trestle Rail Supports (V). See Figures 10 and

10a.

U or V

Fig. 10a

Fig. 10

11. Place the Left/Right Center Deckboards (G) as shown in Figure 11 and secure with twenty-four #8x1-1/4" Black Screws (L). There should be a small gap between each deckboard.

See Figure 11.

L x 24

G

L

Fig. 11

2235AST_2237AST — Page 14 — 06/18





Step 12 is for the Ellison King Adjustable Storage Bed (#2237)

12. Place the Center Deckboard (C) as shown in Figure 12 and secure with twelve #8 x 1-1/4" Black

Screws (L). If you need to adjust the center feet, remove the Center Deckboard, adjust the glides and reattach the deckboard.

L x 12

L

C

Fig. 12

2235AST_2237AST — Page 15 — 06/18

Whittier Wood 2235AST AST Els Q Adj Stg Bed Assembly Instructions

Ellison Adjustable Storage Beds

2235AST

WARNING

2237AST

CUSTOMER SERVICE

2236AST

Ellison Queen Adjustable Headboard/Footboard Kit (x1)

2238AST

Ellison King Adjustable Headboard/Footboard Kit (x1)

2219AST

Ellison Queen/King Pedestal Kit (x2)

2221AST

Ellison Queen Base Kit (x1)

2224AST

Ellison King Base Kit (x1)

Related manuals

Whittier Wood

2195AST

Walker Edison Furniture Company

HD8424

Whittier Wood

2239AST

Whittier Wood

2225AST

Whittier Wood

2206AST

Walker Edison Furniture Company

HDQSLRO

Whittier Wood

2039DUET

Whittier Wood

3907AST

Whittier Wood

3900AST

Whittier Wood

1448CAF

Whittier Wood Furniture

1452AFGSPb

Whittier Wood

2035DUET