Whittier Wood 3916AST AST Els Q Platform Bed Assembly Instructions

Ellison Platform Beds

AST = Astoria Sky finish

Assembly Instructions

Model #

3916ASTa

Ellison Queen Platform Bed

3918ASTa

Ellison King Platform Bed

3920ASTa

Ellison Cal-King Platform Bed

IMPORTANT NOTES:



For normal household use only. Not recommended for commercial use.



Remove items before you move this unit.



This assembly requires two people.



This item has a total maximum combined weight limit of

850 lbs. inclusive of foundation and people. An optional center foot assembly is included to increase the limit to approximately 1,200 lbs.

WARNING

Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the state of California to cause cancer.

Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.

For more information go to: www.p65warnings.ca.gov/wood

Thank you for allowing us to help you furnish your home. We are certain you will be delighted with your new furniture for many years to come.

This product can expose you to chemicals, including formaldehyde, which are known to the State of California to cause cancer.

For more information go to: www.p65warnings.ca.gov/furniture

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

CUSTOMER SERVICE

If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you cannot order replacement parts through your dealer, please contact our customer service department.

Hours: Our friendly customer service staff can be reached:

Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time) .

You may leave a message 24 hours a day, seven days a week.

Customer Service: 800-6533336 • Outside the U.S.: 541-687-0213

Fax: 541-6872060• Email: [email protected]

P.O. Box 2827

Eugene, OR 97402 USA

Production Code:

VN 04/19

3916ASTa Ellison Queen Platform Bed

3918ASTa Ellison King Platform Bed

3920ASTa Ellison Cal-King Platform Bed

Parts List

Please note this Assembly Instruction is for all three beds. Please identify the bed part number when ordering parts.

Please identify the parts and check that the quantities received match those on this list. If you need to replace a part, refer to the model number, part letter and name.

3902ASTa Ellison Queen Platform Kit (x1)

Part

3906ASTa Ellison King Platform Kit (x1)

3909ASTa Ellison Cal-King Platform Kit (x1)

Description Quantity

Ja End Platform Assembly

O

P

Ka

L

M

N

Headboard Platform Assembly

#8 x 1-1/8" Lo-Profile Screw (inserted)

#8 x 1-3/4" Pan Head Screw (inserted)

#8 x 1-5/8" Black Screw (inserted)

1/4" T-Nut (inserted)

Wood Dowel (inserted)

1

1

12

12

33

48

2

3916ASTa_3918ASTa_3920ASTa — Page 2 — 04/19

T

U

Q

R

S

B

D

E




Parts List

3903ASTa

Part

Ellison Queen/King/Cal-King Platform Connector Kit (x1)

Description Quantity

18mm Flat Washer

1/4" x 22mm Hex Bolt

1/4" x 35mm Hex Bolt

44

24

20

Foot Assembly

#6 x 3/4" Brass Flat Head Screw (Inserted)

Wool Felt Pad/Glide (Attached)

Metal Foot Bracket (Attached)

1500mm Channel

4

24

5

4

4

V

W

X

Y

ZA

ZB

Part

N

P

Center Foot Assembly

#8 x 1-1/4" Black Screw (inserted)

#8 x 2" Black Screw (inserted)

3917AST Ellison Queen Platform Filler Strip (x1)

3919AST Ellison King Platform Filler Strip (x1)

3921AST Ellison Cal-King Platform Filler Strip (x1)

Description

#8 x 1-5/8" Black Screw

Wood Dowel

1

4

5

Quantity

7

2

Filler Strip

Cleat

#10 x 2" Pan Head Screw

1

2

2







Tools Required: Phillips screwdriver, 7/16" open end or box end wrench and rubber mallet.

NOTE: Remove this instruction from the Filler Strip Kit carton. Place Filler Strip and hardware kits to the side to allow space for assembling the platform portion of the bed. Open the #3903 Platform

Connector Kit, which attaches the two Platforms together.

1. Open and unfold the Platform Kit carton in the approximate location where the bed will be placed. This will help protect the flooring and the faces of the platform components. Place the

Headboard Platform Assembly (Ka) face down in the approximate location where the headboard will be located with the inside edge facing the End Platform Assembly (Ja). Align the Dowels (P) in the edge of the Headboard Platform Assembly (Ka) with the holes in the edge of the End

Platform Assembly (Ja) see Figures 1 and 1a.

Unfolded

Platform carton

Ka

Ja

Fig. 1a

Fig. 1

P







2. Slide the two sections together so that the flat edges touch as shown in Figure 2. Using the hardware from the #3903 Connector Kit, place the 1500mm Channels (U) on the Platform and align over the predrilled holes in the platform. Attach the Channels (U) with 1/4" X 22mm Hex

Bolts (D) and 18mm Flat Washers (B). See Figures 2 and 2a.

Hardware bag step 2

B

D x 24 x 24

U

D B

U

Fig. 2a

Fig. 2







3. Place the Foot Assemblies (Q) onto the Platform Assembly so that the holes in the metal brackets align over the predrilled holes. The legs should angle outward toward the corner of the platform. Attach the Foot Assemblies (Q) with 1/4" X 35mm Hex Bolts (E) and 18mm Flat washers (B). See Figures 3 and 3a.

Hardware bag step 3

B

E x 16 x 16

Fig. 3a

E

B

Q

Fig. 3







4. The attachment of the Center Foot Assembly (V) is optional if there is no need for extra support beyond the 850 lbs. weight limit. The addition of the foot will reduce the flex built into the design of the bed and provide more support. To attach the Center Foot Assembly (V) align the block over the four holes in the Headboard Platform Assembly (Ka). Attach with 1/4" X 35mm Hex

Bolts (E) and 18mm Flat washers (B). See Figures 4 and 4a.

Hardware bag step 4

B

E x 4 x 4

Fig. 4a

E

B

V

Fig. 4







5. Place two Wooden Dowels (P) into the Filler Strip (Y). Gently hammer in the dowels so that they are entirely seated in the wood. Insert the dowels of the Filler Strip assembly (Y) into the dowel holes of the Headboard Platform Assembly (Ka). See Figures 5, 5a and 5b.

Hardware bag steps 5, 6, 7

P x 2

P Fig. 5a

N

ZB

ZA x 7 x 2 x 2

Y

Fig. 5

Fig. 5b

Y







6. Attach the Filler Strip (Y) to the Headboard Platform Assembly with five 1-5/8" Black Screws (N) screwed into the pre-drilled holes. See Figures 6 and 6a.

N x 5

Fig. 6

N

Fig. 6a







7. Place the Cleat (ZA) onto the filler strip assembly, aligning with the pre-drilled holes. Secure each cleat with one 1-5/8" Black Screw (N) placed into the top of the cleat and one 2" Pan Head

Screw (ZB) screwed into the pre-drilled hole on the side of each cleat. See Figures 7 and 7a.

N

ZB

ZA x 2 x 2 x 2

Fig. 7

N

ZA

ZB

Fig. 7a







8. CAUTION NEEDED: Flip the Platform Assembly over onto the feet. Use extreme care not to bump into light fixtures, ceiling fans, walls, ceiling, or other objects in the room. Protect the corners of the Platform. Do not apply force to the Foot Assemblies (Q). Carefully slide the

Platform carton out from beneath the Platform Assembly and recycle or discard. See Figure 8.

Fig. 8


Whittier Wood 3916AST AST Els Q Platform Bed Assembly Instructions

Ellison Platform Beds

3916ASTa

Ellison Queen Platform Bed

3918ASTa

Ellison King Platform Bed

3920ASTa

Ellison Cal-King Platform Bed

WARNING

CUSTOMER SERVICE

3902ASTa Ellison Queen Platform Kit (x1)

3906ASTa Ellison King Platform Kit (x1)

3909ASTa Ellison Cal-King Platform Kit (x1)

3903ASTa

Ellison Queen/King/Cal-King Platform Connector Kit (x1)

3917AST Ellison Queen Platform Filler Strip (x1)

3919AST Ellison King Platform Filler Strip (x1)

3921AST Ellison Cal-King Platform Filler Strip (x1)

Related manuals

Whittier Wood

3907AST

Whittier Wood

3914AST

Whittier Wood Furniture

3904AST

Whittier Wood

3900AST

Whittier Wood

3910AST

West Elm

Wood Block Platform Headboard

West Elm

Modern Grid Wall Mount Headboard

Whittier Wood

2206AST

Whittier Wood

3807DUET

Whittier Wood

2235AST

Whittier Wood

2195AST

Whittier Wood

3800DUET