advertisement
POE-175-95
Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector
Advanced 802.3bt PoE Network Solution
PLANET POE-175-95 is a Single-Port, 802.3bt Power over Ethernet Injector with a maximum of up to 95 watts of power output over Ethernet cables.
Interface
• 2 RJ45 interfaces
– 1-port Data + Power output
– 1-port Data input
• 1 AC 100~240V input power socket
Power over Ethernet
• Complies with IEEE 802.3at/bt PoE end-span/mid-span PSE
• Supports PoE power up to 95 watts for PoE port
• Auto-detection of PoE IEEE 802.3at/bt equipment and devices from being damaged by incorrect installation
• Monitor the status of the total PoE usage in real time
• Remote power feeding up to 100m
Hardware
• All-in-one compact size design
• Internal power supply
• LED indicators for Power LED, PoE Usage LED and PoE-in-
Use LED
• Wall-mount design
It is designed specifically to meet the demand for growing higher power required network equipment such as:
■ PTZ speed dome camera
■ All-in-one touch PC
■ Remote digital signage display
■ Other network devices that need higher power to work normally
802.3bt
60-95W
Thin
Client
POS
System
Digital
Signage
Lighting
802.3at
30W
Door
Phone
PTZ
Camera
802.3af
15W
IP Phone IP Camera
The POE-175-95 delivers the Ethernet digital data with 54V DC power over the twistedpair cables as a 95-watt Power over Ethernet Injector, and the connected ultra Power over Ethernet splitter, the POE-172S, will separate the digital data and the power into three optional outputs (12V/19V/24V DC) with distance up to 100 meters.
1
POE-175-95
95 watts of Power over 4-pair UTP
Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 95 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling.
Injector Splitter
100~240V AC IN
10/100/1000Mbps Data
Cat 5E: 4-pair UTP
95W Power over Ethernet
End-span
12V/19V/24V
10/100/1000Mbps Data
POE-175-95
Mid-span
PoE Standard
Maximum Power Delivered by PSE
Power Available at PD
Voltage Range
Twisted-pair Used
Supported Modes
Supported Cabling
IEEE 802.3af
(802.3at Type 1)
IEEE 802.3at
(802.3at Type 2)
15.4 watts
12.95 watts
48V
30 watts
25.5 watts
50~57V
2-pair
End-span or Mid-span
Cat. 3/5/5e/6
IEEE 802.3bt
(802.bt Type 3)
IEEE 802.3bt
(802.3bt Type 4)
PoH (Power over HD-
BASE-T)
60 watts 95 watts 95 watts
51 watts
50~57V
71 watts
52~57V
72 watts
52~57V
4-pair 4-pair 4-pair
End-span + Mid-span End-span + Mid-span End-span + Mid-span
Cat. 5e/6 Cat. 5e/6 Cat. 5e/6
Intelligent LED Indicator for Real-time PoE Usage
The POE-175-95 helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. “PoE Power Usage” displayed on the front panel of the POE-175-95 has three LED indicators of different power usages. Via the power usage LED, the POE-175-95 enables the administrator to monitor the status of the power usage of the connected PDs in real time.
All-in-One and Compact Size Design
It is easy to install the PoE injector by way of Plug and Play and comes with simple troubleshooting, making it easy for business and home users to own it.
Besides, the POE-175-95 comes in compact housing, and has a built-in internal power supply. On the side panel of the POE-175-95 features one 100-240V
AC input socket, real-time LEDs (Power LED, PoE Usage LED and PoE-in-Use LED) and two RJ45 ports -- Ethernet port and Ethernet + DC port. Simply plug in the Ethernet cables and AC power cord, and the POE-175-95 is ready to provide high-speed network communication and the 802.3bt PoE++ injector functions simultaneously with no need of software configuration.
2
POE-175-95
Quick and Easy Cabling Installation for PoE Network Deployment
Backward compatible with both 802.3af/at PoE standards, the POE-175-95 allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The POE-175-95 frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.
Powered Device
Data
100~240V AC
10/100/1000Mbps Ethernet Switch
PoE IP Camera
Power
PoE Wireless AP
POE-175-95
95W
Data Power
RJ45 UTP Cable
Ultra PoE Splitter
Applications
Installation of 802.3bt PoE Injector
Due to the backward capability of IEEE 802.3af/at PoE standard, the POE-175-95 can directly connect with any IEEE 802.3af/at end-nodes, such as PTZ
(Pan, Tilt & Zoom) speed dome network cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points.
100 meters
Ethernet Switch
Data
95 watts
Power Data
PoE
Power
POE-175-95
802.3bt PoE Injector
PoE
PoE PTZ
IP Camera
1000BASE-T UTP
1000BASE-T UTP with PoE
3
POE-175-95
Installation of 802.3bt PoE Injector and Splitter
For a place which is hard to find the power inlet, the POE-175-95 and POE-172S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points installed on the top of the building or used in enterprise office or home.
100 meters
Ethernet Switch
Data
95 watts
Power Data
PoE
Data
Power
POE-175-95
802.3bt PoE Injector
DC
Power
POE-172S
12V/19V/24V
Ultra PoE Splitter
PoE
DC
Digital
Signage
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
Extended Installation of IEEE 802.3bt Injector and PoE Network
Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, the POE-175-95 and PLANET PoE Extender, IPOE-E172, can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the POE-175-95. The POE-175-95 delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining PoE power to the remote PoE IP cameras.
100 meters 100 meters
Ethernet Switch
Data
Power
POE-175-95
802.3bt PoE Injector
95 watts
Power Data
PoE
Gigabit PoE
Extender
Power
PoE
Data
PoE
PoE PTZ
IP Camera
1000BASE-T UTP
1000BASE-T UTP with PoE
4
Specifications
Product
Hardware Specifications
Input Port
Interface
Output Port
AC Socket
Network Cable
LED Indicators
Data Rate
Dimensions (W x D x H)
Weight
Unit Output Voltage
Power Requirements
Power Consumption
No. of devices that can be powered
Power over Ethernet
PoE Standard
PoE Power Output Budget
PoE Power Output
PoE Power Supply Type
Power Pin Assignment
Standards Conformance
Standards Compliance
Regulatory Compliance
Environment
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Standard Accessories
Package Contents
POE-175-95
1 x RJ45 STP
Data In
1 x RJ45 STP
PoE (Data + Power) Out
1 x AC input socket
Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
PWR x 1 (Green)
PoE-in-Use x 1 (Green)
PoE Usage x 3 (Green)
10/100/1000Mbps
170 x 100 x 40 mm
480g
DC 54V
AC 100-240V, 1.5A max.
120 watts max.
1
IEEE 802.3at/bt PSE
DC 54V / 95-watt PoE via 4-pair
Max. 90W@1 m cable
Max. 73W@100 m cable
End-span + Mid-span
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bt 4-pair Power over Ethernet Type 4
IEEE 802.3at Power over Ethernet Plus
FCC Part 15 Class A, CE
0 ~ 50 degrees C
-10 ~ 70 degrees C
5 ~ 90%, relative humidity, non-condensing
5 ~ 90%, relative humidity, non-condensing
■ POE-175-95
■ User's manual
■ Power cord
Ordering Information
POE-175-95 Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (95 Watts, internal PWR)
POE-175-95
5
Related Products
POE-171A-95
POE-171A-60
POE-171
POE-172
POE-173
POE-171S
POE-172S
IPOE-171S
POE-E304
IPOE-E172
IPOE-E174
ICA-E6265
Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95 Watts)
Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts)
Single-Port 10/100/1000Mbps 60W Ultra PoE Injector
Single-Port 10/100/1000Mbps Ultra PoE Injector (60 watts, internal PWR)
60-watt Ultra Power over Ethernet Injector
60-watt Ultra Power over Ethernet Splitter with 12V/19V/24VDC output (10/100/1000Mbps)
Single-Port 10/100/1000Mbps Ultra PoE Splitter (12V/19V/24V)
Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter
1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender
Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender
1-port Ultra PoE to 4-port 802.3af/at Gigabit PoE Extender
2 Mega-pixel IR PoE Plus Speed Dome IP Camera with Extended Support
POE-175-95
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518
Email: [email protected]
Fax: 886-2-2219-9528 www.planet.com.tw
POE-175-95
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2020 PLANET Technology Corp. All rights reserved.
6
advertisement
Related manuals
advertisement