advertisement
IPOE-171-95W
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector
(95 Watts, -40~75 degrees C, 12~48V DC)
Advanced Industrial 802.3bt PoE Network Solution
PLANET IPOE-171-95W is a Single-Port , Industrial 802.3bt Power over
Ethernet Injector with a maximum of up to 95 watts of power output over
Ethernet cables.
It is designed specifically to meet the demand for growing higher power required network equipment such as:
● Lighting
● All-in-one touch PC
● Remote digital signage display
● Other network devices that need higher power to work normally
Interface
• 2 RJ45 interfaces
– 1-port Data + Power output
– 1-port Data input
• 1 terminal block for master and slave power input. (Power
Range: 12 ~ 48V DC redundant power)
• 1 PoE mode (standard/legacy) DIP switch
Power over Ethernet
• Complies with IEEE 802.3at/bt PoE end-span/mid-span PSE
• Supports PoE power up to 95 watts for PoE port
• Auto-detection of PoE IEEE 802.3at/bt equipment and devices from being damaged by incorrect installation
• Monitors the status of the total PoE usage in real time
• Remote power feeding up to 100m
Hardware
• IP30 slim type metal case
• LED indicators for Power LED , PoE-in-Use LED and PoE
Usage LED
Industrial Case and Installation
• Solid wall mount or DIN-rail mount installation
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Thin
Client
POS
System
Digital
Signage
Door
Phone
PTZ
Camera
11ac
Wi-Fi AP
IP Phone IP Camera
Lighting
1
IPOE-171-95W
The IPOE-171-95W delivers the Ethernet digital data with 54V DC power over the twisted-pair cables as a 95-watt Power over Ethernet Injector, and the connected ultra Power over Ethernet splitter, the IPOE-171S, will separate the digital data and the power into three optional outputs (12V/24V DC) with distance up to 100 meters.
Convenient and Reliable Power System
To facilitate the 802.3bt PoE++ usage with commonly used 12~48V DC power input for transportation and industrial-level applications, the IPOE-171-95W adopts 12~48V DC to 54V power boost technology to solve power source issue but does not require special power supplies. The IPOE-171-95W provides an integrated power solution with a wide range of voltages (12~48V DC) for worldwide operability. It also provides dual-redundant, reversible polarity 12~48V DC power supply inputs for high availability applications.
Redundant Power Input
12~48V DC
10/100/1000BASE-T
802.3at/bt
PoE Compliant PD Device
54V DC PoE
10/100/1000BASE-T
12~48V DC to 54V DC PoE Power Boost
10/100/1000Mbps Ethernet Data Rate
95 watts of Power over 4-pair UTP
Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), the IPOE-171-95W provides the capability to source up to 95 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling.
IPOE-171-95W
Power
End-span
10/100/1000Mbps Data
PoE Standard
Maximum Power delivered by PSE
Power Available at PD
Voltage Range
Twisted-pair Used
Supported Modes
Supported Cabling
Mid-span
Cat 5E: 4-pair UTP
95W Power over Ethernet
802.3bt Injector
10/100/1000Mbps Data
12V/24V
IEEE 802.3af
(802.3at Type 1)
IEEE 802.3at
(802.3at Type 2)
15.4 watts
12.95 watts
48V
30 watts
25.5 watts
50~57V
2-pair
End-span or Mid-span
Cat. 3/5/5e/6
802.3bt Splitter
IEEE 802.3bt
(802.bt Type 3)
IEEE 802.3bt
(802.3bt Type 4)
60 watts
51 watts
52~57V
4-pair
95 watts
71 watts
52~57V
4-pair
End-span + Mid-span End-span + Mid-span
Cat. 5e/6 Cat. 5e/6
PoH
(Power over HD-BASE-T)
95 watts
72 watts
52~57V
4-pair
End-span + Mid-span
Cat. 5e/6
2
IPOE-171-95W
Intelligent LED Indicator for Power Input and Real-time PoE Usage
The IPOE-171-95W helps users to monitor the current status of power input and PoE power usage easily and efficiently via its advanced LED indication.
“Power Input” allows user to know the status of power input. “PoE Power Usage” displayed on the panel of the IPOE-171-95W has three LED indicators of different power usages. Via the power usage LED, the IPOE-171-95W enables the administrator to monitor the status of the power usage of the connected
PDs in real time.
High Compatibility and Compact Size Design
It is easy to install the PoE injector by way of Plug and Play and comes with simple troubleshooting, making it easy for business and home users to own it. Besides, the IPOE-171-95W comes in compact housing, and provides two DC redundant power inputs, two power LEDs, fault LED and PoE-in-use LED.
Two RJ45 ports -- Ethernet port and Ethernet + DC port – are on the front panel.
Moreover, the IPOE-171-95W, when switched to the legacy mode, provides power to those PD devices which do not fully follow the IEEE 802.3at/bt standard. It is helpful to enhance the compatibility of IPOE-171-95W with other PDs.
Simply plug in the Ethernet cables and DC power wire, and the IPOE-171-95W is ready to provide high-speed network communication and the 802.3bt PoE injector functions simultaneously with no need of software configuration.
Quick and Easy Cabling Installation for PoE Network Deployment
Backward compatible with both 802.3at PoE standards, the IPOE-171-95W allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The IPOE-171-95W frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.
Power
Powered Device
10/100/1000Mbps
Ethernet Switch
IPOE-171-95W
RJ45 UTP Cable
PoE IP Camera
PoE Wireless AP
Ultra PoE Splitter
3
IPOE-171-95W
Stable Operating Performance under Difficult Environments
Today, the PoE demand expands from commercial applications to many critical networks in the harsh environment. The IPOE-171 series will be one of the ideal solutions that provide a high level of immunity against electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curb side traffic control cabinets. The IPOE-171 series can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network. The IPOE-171 series is also equipped with a compact IP30 standard metal case that allows either DIN-rail or wall mounting for efficient use of cabinet space.
Non-PoE
IP Camera
IPOE Splitter
DC
Monitoring Center
Gigabit Switch
IPOE-171-95W
100 meters
Power
PoE
Data
DC
PoE
Power Line (DC)
1000BASE-T UTP
1000BASE-T UTP with PoE
Applications
Installation of 802.3bt PoE Injector
Due to the backward capability of IEEE 802.3at PoE standard, the IPOE-171-95W can directly connect with any IEEE 802.3at end-nodes, such as PTZ (Pan,
Tilt & Zoom) speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points.
100 meters
Power
Supply
DC Input
DC
Power
75 ℃
-40 ℃
Industrial
Switch
Data
Power
PoE
Data
PoE PTZ
IP Camera
IPOE-171 Series
PoE
DC
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
4
IPOE-171-95W
Installation of 802.3bt PoE Injector and Splitter
For a place which is hard to find the power inlet, the IPOE-171-95W and IPOE-171S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points installed on the top of the building or used in enterprise office or home.
100 meters
Power
Supply
DC Input
DC
Power
-40 ℃
PoE
DC
Industrial
Switch
Data
IPOE-171 Series
Power
PoE
Data
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
Industrial 802.3bt
PoE Splitter
Digital Signage
Data
DC
Power
12V/24V DC Output
Extended Installation of IEEE 802.3bt Injector and PoE Network
Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, the IPOE-171-95W and PLANET PoE Extender, IPOE-E172, can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the IPOE-171-95W. The IPOE-171-95W delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining
PoE power to the remote PoE IP cameras.
100 meters 100 meters
Power
Supply
DC Input
DC
Power
75 ℃
Industrial
Switch
PoE
DC
Data Power
PoE
Data
IPOE-171 Series
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
Industrial 802.3bt
PoE Extender
Power
PoE
Data
PoE PTZ
IP Camera
5
IPOE-171-95W
Data Rate
Dimensions (W x D x H)
Weight
Power Requirements
Unit Output Voltage
Power Consumption
No. of devices that can be powered
Installation
Alarm
Enclosure
Power over Ethernet
PoE Standard
PoE Power Output Budget
PoE Power Output
PoE Power Supply Type
Power Pin Assignment
PoE Mode
Standards Conformance
Standards Compliance
Regulatory Compliance
Environment
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Standard Accessories
Package Contents
Specifications
Product
Hardware Specifications
Input Port
Interface
Output Port
Input power terminal block
Network Cable
LED Indicators
IPOE-171-95W
1 x RJ45 STP
Data In
1 x RJ45 STP
PoE (Data + Power) Out
1
Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
System:
Power 1 ( Green )
Power 2 ( Green )
Fault ( Red )
PoE Port:
PoE-in-Use x 1 ( Amber )
PoE Usage:
PoE Usage x 3 ( Amber )
10/100/1000Mbps
135 x 87.8 x 32 mm
470g
DC 12~48V, 5A max.
DC 54V
120 watts max.
1
DIN-rail kit or wall-mount ear
Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
IP30 slim type metal case
IEEE 802.3at/bt PoE PSE
DC 54V / 95-watt PoE via 4-pair
DC 54V / 36-watt PoE via 2-pair
DC 24V~48V input:
Max. 89.5W@1m cable
Max. 75W@100m cable
DC 12V input:
Max. 60W@1m cable
Max. 52W@100m cable
End-span + Mid-span
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
Standard: To provide power to the PD devices that follow the IEEE 802.3at/bt standard.
Legacy: To provide power to the PD devices that do not fully follow the IEEE 802.3af/at/bt standard. Besides, the
Legacy mode supports PoH and Ultra PoE.
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bt 4-pair Power over Ethernet Type 4
IEEE 802.3at Power over Ethernet Plus
FCC Part 15 Class A, CE
-40 ~ 75 degrees C
-40 ~ 85 degrees C
5 ~ 90%, relative humidity, non-condensing
5 ~ 90%, relative humidity, non-condensing
■ IPOE-171-95W
■ User's manual
■ Wall-mount kit
■ Dust cap
Ordering Information
IPOE-171-95W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (95 watts, -40~75 degrees C, 12~48V DC)
6
IPOE-171-95W
Related Products
IPOE-171-60W
IPOE-162
IPOE-171S
IPOE-E172
IPOE-E174
ICA-E6265
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (60 Watts, -40~75 degrees C, 48~56V DC)
Industrial IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-span)
Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter
Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender
1-port Ultra PoE to 4-port 802.3af/at Gigabit PoE Extender
2 Mega-pixel IR PoE Plus Speed Dome IP Camera with Extended Support
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518
Email: [email protected]
Fax: 886-2-2219-9528 www.planet.com.tw
IPOE-171-95W
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2019 PLANET Technology Corp. All rights reserved.
7
advertisement
Related manuals
advertisement