advertisement
IPOE-171-60W
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector
(60 Watts, -40~75 degrees C, 48~56V DC)
Advanced Industrial 802.3bt Ultra PoE Network Solution
PLANET IPOE-171-60W is a Single-Port, Industrial 802.3bt Power over
Ethernet Injector with a maximum of up to 60 watts of power output over
Ethernet cables.
It is designed specifically to meet the demand for growing higher power required network equipment such as:
– Lighting
– All-in-one touch PC
– Remote digital signage display
– Other network devices that need higher power to work normally
Interface
• 2 RJ45 interfaces
– 1-port Data + Power output
– 1-port Data input
• 1 terminal block for master and slave power input. (Power
Range: 48 ~ 56V DC redundant power)
• 1 PoE mode (standard/legacy) DIP switch
Power over Ethernet
• Complies with IEEE 802.3af/at/bt PoE end-span/mid-span
PSE
• Supports PoE power up to 60 watts for PoE port
• Auto-detection of PoE IEEE 802.3at/bt equipment and devices from being damaged by incorrect installation
• Monitors the status of the total PoE usage in real time
• Remote power feeding up to 100m
• Auto-detection of DC input voltage
Hardware
• IP30 slim-type metal case
• LED indicators for Power LED , PoE-in-Use LED and PoE
Usage LED
Industrial Case and Installation
• Solid wall mount or DIN-rail mount installation
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Thin
Client
POS
System
Digital
Signage
Door
Phone
PTZ
Camera
11ac
Wi-Fi AP
IP Phone IP Camera
Lighting
1
IPOE-171-60W
The IPOE-171-60W delivers the Ethernet digital data with DC power over the twisted-pair cables as a 60-watt Power over Ethernet Injector, and the connected ultra Power over Ethernet splitter, the IPOE-171S, will separate the digital data and the power into three optional outputs (12V/24V DC) with distance up to 100 meters.
60 watts of Power over 4-pair UTP
The IPOE-171-60W and IPOE-171S Ultra PoE solutions use the same cabling standard such as IEEE 802.3af/at PoE. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling.
IPOE-171-60W
Power
End-span
10/100/1000Mbps Data
PoE Standard
Maximum Power delivered by PSE
Power Available at PD
Voltage Range
Twisted-pair Used
Supported Modes
Supported Cabling
Mid-span
Cat 5E: 4-pair UTP
60W Power over Ethernet
Ultra PoE Injector
Ultra PoE Splitter
IEEE 802.3af (802.3at Type 1)
15.4 watts
12.95 watts
48V
IEEE 802.3at (802.3at Type 2)
2-pair
End-span or Mid-span
Cat. 3/5/5e/6
30 watts
25.5 watts
50~57V
10/100/1000Mbps Data
12V/24V
IEEE 802.3bt(802.bt Type 3)
60 watts
51 watts
50~57V
4-pair
End-span + Mid-span
Cat. 5e/6
Intelligent LED Indicator for Power Input and Real-time PoE Usage
The IPOE-171-60W helps users to monitor the current status of power input and PoE power usage easily and efficiently via its advanced LED indication.
“Power Input” allows user to know the status of power input. “PoE Power Usage” displayed on the panel of the IPOE-171-60W has three LED indicators of different power usages. Via the power usage LED, the IPOE-171-60W enables the administrator to monitor the status of the power usage of the connected
PDs in real time.
2
IPOE-171-60W
High compatibility and Compact Size Design
Without It is easy to install the PoE injector by way of Plug and Play and comes with simple troubleshooting, making it easy for industrial users to own it.
Besides, the IPOE-171-60W comes in compact housing, and provides two DC redundant power inputs, two power LEDs, fault LED and PoE-in-use LED. Two
RJ45 ports -- Ethernet port and Ethernet + DC port – are on the front panel.
Moreover, the IPOE-171-60W, when switched to the legacy mode, provides power to those PD devices which do not fully follow the IEEE 802.3at/bt standard. It is helpful to enhance the compatibility of IPOE-171-60W with other PDs.
Simply plug in the Ethernet cables and DC power wire, and the IPOE-171-60W is ready to provide high-speed network communication and the 802.3bt PoE injector functions simultaneously with no need of software configuration.
Redundant Power Input
48~56V DC
10/100/1000BASE-T
802.3af/at/bt
PoE Compliant PD Device
45~53V DC PoE
10/100/1000BASE-T
Redundant Power of 48~56V DC Input to 45~53V DC PoE Output
10/100/1000Mbps Ethernet Data Rate
Quick and Easy Cabling Installation for PoE Network Deployment
Backward compatible with both 802.3af/at PoE standards, the IPOE-171-60W allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The IPOE-171-60W frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.
Power
Powered Device
10/100/1000Mbps
Ethernet Switch
IPOE-171-60W
RJ45 UTP Cable
PoE IP Camera
PoE Wireless AP
Ultra PoE Splitter
3
IPOE-171-60W
Stable Operating Performance under Difficult Environments
Today, the PoE demand expands from commercial applications to many critical networks in the harsh environment. The IPOE-171 series will be one of the ideal solutions that provide a high level of immunity against electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curb-side traffic control cabinets. The IPOE-171 series can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network. The IPOE-171 series is also equipped with a compact IP30 standard metal case that allows either DIN-rail or wall mounting for efficient use of cabinet space.
Non-PoE
IP Camera
IPOE Splitter
DC
Monitor
Gigabit Switch
IPOE-171-60W
100 meters
Power
PoE
Data
DC
PoE
Power Line (DC)
1000BASE-T UTP
1000BASE-T UTP with PoE
Applications
Installation of 802.3bt PoE Injector
Due to the backward capability of IEEE 802.3af/at PoE standard, the IPOE-171-60W can directly connect with any IEEE 802.3af/at end-nodes, such as PTZ
(Pan, Tilt & Zoom) speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points.
100 meters
Power
Supply
DC Input
DC
Power
75 ℃
-40 ℃
Industrial
Switch
Data
Power
PoE
Data
PoE PTZ
IP Camera
IPOE-171 Series
PoE
DC
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
4
IPOE-171-60W
Installation of 802.3bt PoE Injector and Splitter
For a place which is hard to find the power inlet, the IPOE-171-60W and IPOE-171S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points installed on the top of the building or used in enterprise office or home.
100 meters
Power
Supply
DC Input
DC
Power
PoE
DC
Industrial
Switch
Data
IPOE-171 Series
Power
PoE
Data
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
Industrial 802.3bt
PoE Splitter
Digital Signage
Data
DC
Power
12V/24V DC Output
Extended Installation of IEEE 802.3bt Injector and PoE Network
Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, the IPOE-171-60W and PLANET PoE Extender, IPOE-E172, can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the IPOE-171-60W. The IPOE-171-60W delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining
PoE power to the remote PoE IP cameras.
100 meters 100 meters
Power
Supply
DC Input
DC
Power
75 ℃
Industrial
Switch
PoE
DC
Data Power
PoE
Data
IPOE-171 Series
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
Industrial 802.3bt
PoE Extender
Power
PoE
Data
PoE PTZ
IP Camera
5
IPOE-171-60W
Specifications
Product
Hardware Specifications
Input Port
Interface Output Port
Input power terminal block
Network Cable
LED Indicator
Data Rate
Dimensions (W x D x H)
Weight
Power Requirements
Unit Output Voltage
Power Consumption
No. of devices that can be powered
Installation
Alarm
Enclosure
Power over Ethernet
PoE Standard
PoE Power Output Budget
PoE Power Output
PoE Power Supply Type
Power Pin Assignment
PoE mode
Standards Conformance
Standards Compliance
Regulatory Compliance
Environment
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Standard Accessories
Package Contents
IPOE-171-60W
1 x RJ45 STP
Data In
1 x RJ45 STP
PoE (Data + Power) Out
1
Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
System: Power 1 ( Green ), Power 2 ( Green ), Fault ( Red )
PoE Port: PoE-in-Use x 1 ( Orange )
PoE Usage: PoE Usage x 3 ( Orange )
10/100/1000Mbps
135 x 87.8 x 32 mm
430g
DC 48~56V, 2A max.
DC 45~53V
75 watts max.
1
DIN-rail kit or wall-mount ear
Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
IP30 slim-type metal case
IEEE 802.3at/bt Ultra PoE PSE
DC 50~54V / 60-watt PoE via 4-pair
DC 48~49V / 30-watt PoE via 2-pair
Max. 60W@1m cable
Max. 51W@100m cable
End-span + Mid-span
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
Standard: To provide power to the PD device that follows the IEEE 802.3af/at/bt standard.
Legacy: To provide power to the PD device that does not fully follow the IEEE 802.3af/at/bt standard.
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bt 4-pair Power over Ethernet Type 3
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
FCC Part 15 Class A, CE
-40 ~ 75 degrees C
-40 ~ 85 degrees C
5 ~ 90%, relative humidity, non-condensing
5 ~ 90%, relative humidity, non-condensing
IPOE-171-60W
User's manual
Wall-mount kit
Dust cap
Ordering Information
IPOE-171-60W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts, -40~75 degrees C, 48~56V DC)
6
IPOE-171-60W
Related Products
POE-171A-60
POE-171A-95
IPOE-171-95W
IPOE-162
IPOE-171S
IPOE-E172
IPOE-E174
ICA-E6265
Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts)
Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95 Watts)
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95 Watts, -40~75 degrees C, 24~48V DC)
Industrial IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-span)
Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter
Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender
1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender
2 Mega-pixel IR PoE Plus Speed Dome IP Camera with Extended Support
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518
Email: [email protected]
Fax: 886-2-2219-9528 www.planet.com.tw
IPOE-171-60W
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved.
7
advertisement
Related manuals
advertisement