OWNER'S MANUAL

CAUTION

DONOTOPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK).

NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

3

4

5

6

1

2

7

8

9

•

Explanation of Graphical Symbols

The lightning equilateral presence flash with arrowhead symbol, within triangle, o[ uninsulated is intended

"dangerous to alert you to the voltage" within an the product's magnitude persons.

enclosure to constitute that may be of suf}icient a risk of eluctric shock to

The exclamation is intended operating the literature to alert and point within an equilateral you maintenance accompanying to the presencu

(servicing) the appliance.

triangle of important instructions in

Read Instructions All the safety and operating instructions should be read belore the product is operated.

Retain Instructions The saliety and operating instructions should be retained for future rcl)rence.

Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.

Follow Instructions - All operating and use instructions should be lollowed.

Cleaning - Unplug this product l)'om the wall outlet belore cleaning. Do not use liquid cleaners or aerosol cleaners.

Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards.

Water and Moisture - Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement: or near a swimming pool: and the like.

Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or tahle recommended by the manulS_cturer, or sold with the product. Any mounting of the product should follow the manulSicturer's instructions, and should use a lnounting accessory rcconnnended by the manufacturer.

A product and cart combination should be moved with care.

Quick stops, excessive loire, and uneven surfaces may cause the product and cart combination to overt/trn.

10 Ventilation Slots and openings in the cabinet are provided lot ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofi_, rug, or other similar surface. This product should not be placed in a built-in installation s[tch as a bookcase or rack unless proper ventilation is provided or the nmnufacturer's instructions have been adhered to.

11 Power Sources - This product should be operated only fl'om the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate fl'om battery power, or other sources, refer to lhe operating insn'uctions.

12 Grounding or Polarization This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a sal)ty feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still 15dlto fit, contact your electrician to replace your obsolete outlet. Do not defeat the sal)ty purpose of the polarized plug.

13 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14 Lightning For added protection for this product during a lightning storm, or when it is leli unattended and unused for long periods of time, unplug it l]-om the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lighming and power-line surges.

1.g

Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it carl fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep fl'om touching such power lines or circuits as contact with them might be fatah

16 OverloadingDo not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17 Ohject and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) b) c)

When the power-supply product, cord or plug is damaged,

If liquid has been spilled, or objects have fallen into the

If the product has been exposed to rain or water,

Caution-i En

d) If the product does not operate normally by lollowing the operating insmtctions.

Adjust only those controls that are covered by the operating insmtctions as an improper adj usunent of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) f)

If the product has been dropped or damaged in any way, and

When the product exhibits a distinct change in perlormance - this indicates a need for service.

20 Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manulhcmrer or have the same characteristics as the original part. Unauthorized substitutions lnay result in fire, electric shock, or other hazards.

21 Safety Check - Upon completion ol any service or repairs to this product, ask the service technician to perlorm salety checks to determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

23 HeatThe product should be situated av_ay lrom heat sources sLtchas radiators, heat registers, stoves, or other products (inchlding amplifiers) that produce heat.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEe that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

24 Outdoor Antenna Gromlding - If an outside antenna or cable system is connected to the product, be sure the antcnna or cable system is grounded so as to provide some protection against voltage sur,aes and built-up static charges.

Article 810 of the Nafonal Elecn'ical Code, ANSl/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

ELECTIq]C sEawce

MAST_

GROUND

NEe NAT_ONAL ELECTRICALCO DE

_NECSECTION 810_0)

(NEC SECTION 810_1)

ELECTRODE SYSTEM

_NECAnT 25O PAnT H)

FCC INFORMATION (for US customers)

1 IMPORTANT NOTI(E: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions contained in this lnan[lal, meets FCC requirements.

Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the product.

IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied wilh this product MUST be used. Follow all installation instructions.

Faihtre to follow instructions could void your FCC authorization to use this product in the USA.

NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio fl-equencies and, if not installed and used according to the insmlctions found in the users manual, may cause interlierence harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that intcrlierence will not occur in all installations.

If this product is found to be the soulve of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being afl)cted by the interlierence.

Utilize power outlets that are on diflierent branch (circuit breaker or fuse) circuits or install AC line filtelJs.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead.

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave., Buena Park, CA

90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

Caution-ii En

1 To assure the finest perli_rmance, please read this manual carefidly. Keep it in a salk: place li)r future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place away l}-omdirect sm_light, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least

30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3 Locate this m_it away Dora other electrical appliances, motors, or transformers to avoid h[t]nming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high hmnidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the mp of this unit, do not place: other components, as they may cause damage and/or discoloration on the sm'lhce of this unit.

burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

containers with liquid in them, as they may fall and liquid may catlse electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obslruct heat radiation. If the temperature inside this unit rises, it may catlse fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this m_it upside-down.

It may overheat, possibly causing damage.

9 Do not use lk_rceon switches, knobs and/or cords.

10 When disconnecting the power cable l'rom the wall outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible liar any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The cabinet should never be opened liar any reasons.

1S When not planning to use this unit liar long periods of time

(i.e. vacation), disconnect the AC power plug from the wall outlet.

16 Install this m_it near the AC outlet and where the AC power plug can be reached easily.

17 Be sure to read the "Troubleshooting" section on common operating errors beli)re concluding that this unit is lhulty.

18 Beli_re moving this unit, press STANDBY/ON to set this unit in the standby mode, and then disconnect the AC power plug from the AC wall outlet.

19 The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTP.IC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

This unit is not disconnected fi'om the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off by S'IANDBY/ON.

This state is called the standby mode.

In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of"plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

POUR LES CONSOMMATEURS CANADIENS

Pour dviter les chocs _lectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

Cet appareil numdrique de la classe B est conforme h la norme NMB-003 du Canada.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner's Manual in a safe place for future reference.

Caution-iii En

Notice .......................................................................

Features ...................................................................

S upplied accessories ..................................................

Getting started ........................................................

Quick start guide ....................................................

3

4

5

2

3

Connections ...........................................................

Optimizing the speaker setting

for your listening room ....................................

Using AUTO SETUP ..............................................

11

28

28

Advanced sound configurations ...........................

61

Changing sound field pm'ameter settings ................. 61

Selecting decoders ...................................................

Customizing this unit (MANUAL

66

SETUP) ......... 69

Using SET MENU ...................................................

1 SOUND MENU ....................................................

2 lNPUT MENU ......................................................

30PTION MENU ...................................................

Remote control features ........................................

71

72

78

81

85

Using tile remote control for the SCENE lbature .... 85

Controlling this unit, a TV, or other components....

86

Setting remote control codes ...................................

88

Resetting all remote control codes ...........................

89

Advanced setup ......................................................

90

Using the advanced setup ........................................

90

Selecting the SCENE templates ...........................

33

Selecting the desired SCENE template .................... 33

Creating your original SCENE templates ................ 36

Playback ................................................................

Basic procedure .......................................................

37

37

Selecting the MULTI CH INPUT component ......... 38

Selecting the fl'ont speaker set .................................

38

Selecting audio input jacks

(AUDIO SELECT) ..............................................

Displaying the current status of this unit on a video monitor ...............................................

39

39

Using your headphones ............................................

Muting the audio output ...........................................

Playing video sources in the background of an audio source ................................................

40

40

40

Displaying the input source information ................. 40

Using the sleep timer ...............................................

Sound field programs ..........................................

41

42

Selecting sound field programs ...............................

42

Sound field program descriptions ............................

42

Enjoying unprocessed input sources

(Straight decoding mode) ....................................

47

Using audio features .............................................

48

Enjoying pure hi-fi sound ........................................

48

Adjusting the tonal quality .......................................

48

Adjusting the speaker level ......................................

48

Enjoying multi-channel sources in 2-channel stereo ...............................................

49

Selecting the night listening mode ...........................

49

FM/AM tuning ......................................................

51t

Automatic tuning .....................................................

Manual tuning ..........................................................

Automatic preset tuning ...........................................

Manual preset tuning ...............................................

Selecting preset stations ...........................................

Exchanging preset stations ......................................

52

XM Satellite Radio tuning ...................................

53

Connecting the XM Mini-Tuner Dock .................... 53

50

50

51

51

52

Activating XM Satellite Radio ................................

54

Basic XM Satellite Radio operations .......................

54

Setting the XM Satellite Radio preset channels ...... 56

Displaying the XM Satellite Radio information ...... 57

Using iPod

TM

..........................................................

Controlling iPod Ix1...................................................

Recording ..............................................................

58

58

60

Troubleshooting .....................................................

Resetting the system ............................................

94

101

Glossary ................................................................

102

Sound field program information ......................

1114

Parametric equalizer information .....................

105

Specifications .......................................................

Index .....................................................................

106

107

(at the end of this manual)

Front panel ................................................................

Remote control .......................................................

List of remote control codes .................................

ii i iii

"@SPEAKER" or "@DVD" (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet or the pages at the end of this manual li)r the information about each position of the parts.

11

1En

About this manual

• -",;;'-indicates a tip for your operation.

• Some operations carl be parformed by using either the buttons on the front panel or the ones on the remote controh In case the button names differ bet,seen the front panel and the remote control, the button name on the remote control is given in parentheses.

• This maarlal is printed prior to production. Design and specifications arc sohject to change in part as a result of improvements, etc. In case of diffarcnces between the manual and product, the product has priority.

• "@SPEAKER" or "@DVD" (example) indicates the name of the parts on the front panel or the remote controh

Refer to the attached sheet or the pages at the end of this manual for the information abotlt each position of the parts.

• The symbol "_,*" with page number(s) indicates the corresponding reference page(s).

We Want You Listening For A Lifetime

[111_

DiGiTAL.

EX

Manufactured under license from Dolhy Laboratories.

"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Lahoratories.

DTS-ES I NEO:6 I 96124. Product "DTS" and "DTS-ES I NEO:6" are registered trademarks ol DTS, Inc.

"96124" is a trademark ol DTS, Inc.

iPod

TM

"iPod" is a trademark ol Apple Inc., registered in the U.S. and other countries.

i-I_rgl|"

"HDMI", the "HDMI" logo and "High-Definition Multimedia

Interface" are trademarks or registered trademarks of HDMI

Licensing LLC.

SILENT

CINEMA

TM

"SILENT CINEMA" is a trademark of YAMAHA

CORPORATION.

Consarner Electronics Group want you to get the

Y;alnaha and the Electronic Industries Association's leveh One that lets the sound come through loud and

L2ST_NZN_ clear without annoying blaring or distortion and.

most ilnportantly, without affecting your sensitive hearing. Since hearing damage from loud smmds is often undetectable tmtil it is too late. Yamaha and the Electronic

Industries Association's Consumer Electronics Group reconnnend you to avoid prolonged exposure fi'oln excessive

: olulne levels.

The XM name and related ]ogos are registered trademarks ol XM

Satellite Radio Inc.

_neural

SURROUND.

Neural S[lrl'o[md Ix' name and related by Neural Audio Corporation.

logos are tradenutrks owned

2 En

Built-in 7-channel power amplifier

• Mininmm RMS output power

(1 kHz, 0.7% THD, 8 Q)

Front: 120 W + 120 W

Center: 120 W

Surround: 120 W + 120 W

Surround back: 120 W + 120 W

SCENE function

• 18 preset SCENE templates for various situations

• 4 original SCENE templates for customizing capability

• Controlling Yamaha SCENE control signal support component (some models only) working with the SCENE function

Sound field programs

• Proprietary Yamaha technology lk)r the creation of sound fields

• Compressed Music Enhancer mode to improve the sound quality of compression artifacts (such as the MP3 l'orti_at) to that of a high-quality stereo

• Dolby Digital/Dolby Digital EX decoder

• DTS/DTS-ES Matrix, Discrete, DTS Net:6,

DTS 96124 decoder

• Dolby Pro Logic/Dolby Pro Logic ll/Dolby Pro Logic llx decoder

• Neural Surround decoder

• Virtual CINEMA DSP

•SlLENT ClNEMA

Sophisticated FM/AM tuner

• 4()-station random and direct preset tuning

• Automatic preset tuning

• Preset station shifting capability (preset editing)

XM Satellite Radio

• XM Satellite Radio tuning capability (using the "XM Mini-

Tuner Dock" sold separately)

• Neural Surround decoder to play back the XM HD content of

XM Satellite Radio broadcasts in multi-channels, resulting in a full surround sound experience

• XM Satellite Radio informati(m displaying capability

HDMI (High-Definition Multimedia Interface)

• HDMI interface for standard, enhanced or high-definition video (includes 1080p video signal transmission) as well as multi-channel digital audio based on HDMI version 1.2a

• Analog video to HDMI digital video up-conversion

(composite video 4+ S-video 4+ component video :, HDMI digital video) capability lot monitor out

• Analog video deinterlacing and/or up-scaling (480i (NTSC)/

576i (PAL) _. 480p/576p _. 720p or 1080i) iPod controlling capability

• DOCK terminal to connect a Yamaha iPod universal dock

(such as the YDS-10, sold separately), which supports iPod

(Click and Wheel), iPod nano, and iPod nfini

• Playback inlormation displaying capability

• Battery charging capability

Other features

• YPAO (Yamaha Parametric I".oom Acoustic Optinfizer) lbr automatic speaker setup

• 192-kHz/24-bit D/A converter

• OSD (on-screen display) menus that allow yotl to optimize tiffs unit to suit your individual audiovisual system

• 5.1 or 7.l-channel additional input jacks for discrete multichannel input

• S-video signal input/output capability

• Component video input/output capability includes

(3 COMPONENT VIDEO INs and 1MONITOR OUT)

• Digital video signal conversion (composite video 4+ S-video

:, component video) capability for monitor out

• Optical and coaxial digital audio signal jacks

• Pure Direct mode for pttre hi-fi sound lor all sources

• Cinema and music night listening modes

• Remote control with preset remote control codes capability

• Bi-amplification connection capability

• Sleep timer

Check that you received all of the following parts.

Remote control Batteries (2)

(AA, R6, UM-3)

<>

Optimizer microphone

AM loop antenna

Indoor FM antenna

The lorm of the supplied accessories varies depending on the models.

3 En

Installing batteries in the remote control

1

Take off the battery compartment cover.

2

Insert the two supplied batteries

(AA, R6, UM-3) according to the polarity markings (+ and -) on the inside of the battery compartment.

Snap the battery compartment cover back into place.

• Change all of tile batteries if you notice the following conditions: the operation range of the remote control decreases.

the (_)TRANSMIT indicator does not flash or its light becomes dim.

• Do not use an old battery together with a new one.

• Do not use difli:rent types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these diflizrcnt types of batteries may have the same shape and color.

• lfthe baueries have leaked, dispose of then] immediately.

Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

• Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the men]ory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared.

4 En

The following steps describe the easiest way to enjoy DVD movie playback in your home theater.

Video monitor

Front right speaker

Subwooter

In these steps, you need the following supplied accessories.

[71AM loop antenna

[71Indoor FM antenna

Surround left speaker

The following items are not included in the package of this unit.

Speakers

[71Front speakers ....................................

2

[71Center speaker ...................................

1

[71Surround speakers .............................

4

Select magnetically shielded speakers. The minimum required speakers are two front speakers.

The priority of the requirement of other speakers is as _bllows:

1. 'I\vo surround speakers

2. Center speaker

3. One (or two) surround back speaker(s)

[71Active subwoofer ....................................

1

Select an active subwoofer equipped with an RCA input ,jack.

[71Speaker cables ........................................

7

[71Subwoofer cable .....................................

1

Select a monaural RCA cable.

[71DVD player ...............................................

Select DVD player equipped with coaxial digital audio output ,jack and composite video output

,jack.

1

Video monitor ...........................................

Select a TV monitor, video monitor or projector equipped with a composite video input jack.

1

Video cable ..............................................

Select an RCA composite video cable.

1

[71Digital coaxial audio cable .....................

1

Enjoy DVD playback!

SEn

Place your speakers in the room and connect them to this unit.

Be sure to connect the left channel (L), right channel

(R), '%" (red) and (black) properly.

Front speakers and center speaker

-%

1 Place your speakers and subwoofer in the room.

2

Connect speaker cables to each speaker.

Be sure to connect the "+" (red) and .... (black) properly.

Cables are colored or shaped difli:rently, perhaps with a stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the "+" (red) terminals of this unit and your speaker.

Connect the plain cable to the .... (black) terminals.

3 Connect each speaker cable to the corresponding speaker terminal of this unit.

f

To the center speaker

Front right speaker

To the front left speaker

Surround and surround back speakers

@ Make sure that this unit and the subwoofer are unplugged from the AC wall outlets.

@ 'I\vist the exposed wires of the speaker cables together to prevent short circuits.

@ Do not let the bare speaker wires touch each other.

@ Do not let the bare speaker wires touch any metal part of this unit.

To the surround right speaker left speaker

To the surround back right speaker

To the surround speaker

Connect the subwoofer cable to the

SUBWOOFER PRE OUT jack of this unit and the input jack of the subwoofer.

Subwoofer AV receiver

Inputlack i

Subwoofer cable

SUBWOOFER PRE OUT jack

6En

Connect the video cable to the composite video output jack of your DVD player and

DVD VIDEO jack of this unit.

AV receiver

DVD player

Make sure that this unit and the DVD player are unplugged fl'om the AC wall outlets.

Connect the digital coaxial audio cable to the digital coaxial audio output jack of your DVD player and the DVD DIGITAL INPUT COAXIAL jack of this unit.

Composite video output jack

DVD VIDEO Jack

]

Video cable

3 Connect the video cable to the VIDEO

MONITOR OUT jack of this unit and the video input jack of your video monitor.

Video monitor AV receiver

DVD player AV receiver

Digital coaxial audio output jack

Digital coaxial audio

DVD DIGITAL INPUT

COAXIAL jack

Video

Input Jack

Video cable

VIDEO MONITOR OUT jack

7 En

I

SEn

Connect the supplied AM loop antenna and indoor FM antenna to this unit.

See page 24 for the connection information.

AM loop antenna

Indoor FM antenna I

The types of the supplied indoor FM antenna and FM antenna terminal of this unit arc different depending on the models.

Connecting the wire of the AM loop antenna insert

Open the lever

Closethelever

The wire of the AM loop antenna does not have any polarity and you can connect either end of the wire to AM or GND terminah

Assembling the supplied AM loop antenna

Connect the power plug of this unit and other components into the AC wall outlet.

--'4<--

This unit is equipped with AC OUTLETS lbr the power supply of the other components. See page 24 ff)r details.

• For further connections

• Using the other kind of speaker combinations

_+ P. 12

• Connecting a video monitor via various ways of the connection

_+ P. 18

• Connecting a DVD player via various ways of the connection

_+ P. 19

• Connecting a DVD recorder or a digital video recorder

_+ P. 20

• Connecting a set-top box

_+ P. 20

• Connecting a CD player, an MD recorder or a turntable

_+ P. 21

• Connecting an external amplifier

_+ P. 22

• Connecting a DVD player via analog multichannel audio connection

_+ P. 22

• Connecting a Yamaha iPod universal dock

_+ P. 23

• Using the REMOTE OUT jack

_+ P. 23

• Using the VIDEO AUX jacks on the front panel

_+ P. 23

• Connecting an outdoor FM/AM antenna

_+ P. 24

• Connecting the XM Mini-Tuner Dock

_+ P. 53

,pT_IL-?_f.l,fl.f

4

Rotate @VOLUME to adjust the volume.

Check the type of the connected speakers.

if the speakers are 6 ohm speakers, set "SP tMR" to

"6f_ MtN" before using this unit (see page 25). 4 ohm speakers can be also used as the front speakers (see page 91 ).

1 Turn on the video monitor connected unit.

to this

2

Press @SCENE1 button.

"DVD Viewing" appears in the front panel display, and this unit automatically optimize own status for the DVD playback.

The indicator on the selected SCENE button lights up while this unit is in the SCENE mode.

3

Start playback of the desired DVD on your player.

-#.

If the connected DVD player is a Yamaha product and has capability of the SCENE control signals with the REMOTE

OUT jack of this unit (see page 23), this unit can automatically activate the DVD player and start playback when you press the @SCENE1 button. Relizr m the instruction manual of the DVD player for further information.

When you change the input source or sound lield program, the SCENE mode is deactivated, and the indicator on the selected SCENE button tums of1.

•

Using the other SCENE buttons

In the following cases, try pressing the corresponding

SCENE button to enjoy the playback of the desired sources.

Case A: "1 want to listen to at music disc fron'_ the connected DVD player as the background music for this room..."

Press @SCENE2 (or

@SCENE2) to select "Disc

Listening".

Case B: "1 want to watch a TV program..."

Press @SCENE3 (or

(_SCENE3) to select "TV

Viewing".

Note

To use the "TV Vievdng" template (Case B), you must connect a satellite receiver, a cable TV recei,,er or an HDTV decoder to this unit in ad', ance. See page 20 lor details.

Case C: "1 want to listen to a music program of the

FM/AM radio station..."

Press @SCENE4 (or

@SCENE4) to select "Radio

Listening".

• To use the "Radio Listening" template (Case C), you have to tune into the desired radio station. See pages 50 to 52 lor the tuning inhmnation.

• To achiexe the best possible reception, orient the connected AM loop antenna, or adjEst the position ol the end ol the indoor FM antenna.

i

9 En

If you cannot find the desired situation, you carl select and change the assigned SCENE template li>rthe SCENE buttons. See page 33 li)r derails.

•

After using this unit...

ii

Press (_)STANDBY/ON standby mode.

to set this unit to the

• Customizing the SCENE templates

• Using various SCENE templates

_ P. 33

• Creating your original SCENE templates

_ P. 36

•

Using various input sources

•

Basic controls of this unit

_ P. 37

• Enjoying FM/AM radio programs

_.> P. 50

• Enjoying XM Satellite Radio programs

_,_ P. 53

• Using your iPod with this unit

_ P. 58

This unit is set to the standby mode and consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby mode, press the desired @SCENE buttons (or

(_SCENE) or @STANDBY/ON on the front panel (or

@POWER on the remote control). See page 25 for details.

• Using various sound features

• Using various sound field programs

_,_ P. 42

• Using the pure direct mode for high fidelity sound

_ P. 48

• Customizing the sound field programs

_ P. 61

• Adjusting the parameters of this unit

• Automatically optimizing the speaker parameters for your listening room

(AUTO SETUP)

_,_ P. 28

• Manually adjusting various parameters of this unit

_ P. 71

• Setting the remote control

_ P. 85

• Adjusting the advanced parameters

_ P. 90

• Additional feature

Automatically turning off this unit

_ P. 41

10 En

(U.S.A. and Canada models only)

Connect the XM Mini-

Tnner Dock (sold separately).

_ R 53

DOCK terminal

Connect a Ymnaha iPod universal dock

(sold separately).

_, R 23

Connect the input SoLlrce conwment equipped _ith the nmhi-channel output jacks.

R 22

UDIO jacks mnect the analog

]e plugs.

audio

P. 18-2

F_'i:A L INPUT/ ")

OUTPUT jacks

Connect the digital audio [ cable plugs.

P. 19-211

J

ANTENNA terminals

Connect the FM and AM antenna.

':, R 24

Connect the speakers.

_, p.

11 En

The speaker layout below shows the speaker setting we recommend.

YOUcan use it to ei!]oy CINEMA DSP and multichannel audio sources.

1.8 m (6 ft)

/

30 cm (12 in) or more

Front left and right speakers (FL and FR)

The fi-ont speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds (dialog, vocals, etc.), if for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the fidl system.

Surround left and right speakers (SL and SR)

The surround speakers are used for effect and surround sounds.

Surround back left and right speakers (SBL and SBR)

The surround back speakers supplement the surround speakers and provide more realistic front-to-hack transitions.

Presence left and right speakers (PL and PR)

The presence speakers supplement the sound frenl the front speakers with extra ambient effects prednced hy the sound field programs (see page 42). _Ib use the presence speakers, connect the speakers to EXTRA SP terminals and then set 'EXTRA

SP ASSIGN" to 'PRESENCE" (see pages 29 and 72).

0.5 to 1 m (1 to3 ft) 0.5 to 1 m (1 to 3 ft)

1.8 m (6 ft) 1.8 m (6 ft)

Subwoofer (SW)

The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also R)r high fidelity sound reproduction of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources. The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.

12 En

.qffff_f|qP

Be sure to connect the left channel (L), right channel (R), "+" (red) and "" (black) properly.

If the connections are faulty, this unit cannot reproduce the input sources accurately.

Caution

• Before connecting the speakers, make sure that this unit is turned off (see page 25).

• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage this unit and/or the speakers, if the speaker panel display when you turn on this unit.

wires are short-circuited, "CHECK SP WIRES" appears in the front

• Use the magnetically shielded speakers.

If this type of speaker still creates interference with the monitor, place the speakers away from the monitor:

• If you are to use 6 ohm speakers, be sure to set "SP IMR" to "6f2 MIN" before using this unit (see page 25). 4 ohm speakers can be also used as the front speakers (see page 91).

A speaker cord is actually a pair ol insulated cables running side by' side. Cables are colored or shaped dillerently, perhaps _ith a stripe, groove or ridge. Connect the striped (grooxed, etc.) cable to the "+" (red) terminals ol this unit and your speaker. Connect the plain cable to the .... (black) terminals.

EXTRA SP terminals

Connect the ahernative front speaker system (FRONT B) or presence speakers. To select the function of the speakers connected to the EXTRA SP terminals, set the "EXTRA SP ASSIGN" parameter in "SOUND MENU" (see page 72).

_%,=

You can also select the functi®n of the speakers c®nnected to the EXTRA SP terminals in "AUTO

SETUP" (see page 29).

Subwoofer

®

Right Left

Front speakers

(FRONT A)

Right Left

Surround speakers

Right Left

Surround back speakers

When you use a single surromld back speaker, c®nnect the speaker t® the lel_

SURROUND BACK terminal

(SINGLE).

13 En

•

Connecting the speaker cable

Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and then twist the exposed wires of the cable together to prevent short circuits.

•

Connecting the banana plug

Tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

10 mm (0.4 in) it

2 Loosen the knob.

Bed: positive (+)

Black: negative (-)

Insert one bare wire into the hole on the side of each terminal.

Bed: positive (+)

Black: negative (-)

•

Using bi-amplification connections

Caution

Remove the shorting bars or bridges of your speakers to separate the LPF (low pass filter) and HPF (high pass filter) crossovers.

This unit allows you to make bi-amplification connections to one speaker system.

Check if your speakers support biamplification.

'Ib make the bi-amplification and SURROUND connections,

BACK/BI-AMP terminals use the FRONT as shown below.

'Ib activate the bi-amplification connections,

"BI-AMP" to "ON" in _%DVANCED SETUP" (see set page 93).

Front speakers

Right Left

4

Tighten the knob to secure the wire.

@ © @ _IN_LE@

When you make the conventional conneclion, YIlakesure thai the shorting bars are put into the terminals appropriately.

Reler to the instruction inanuals o| the speakers lor details.

14 En

.qlflf_fPtP

Audio jacks and cable plugs

AUDIO DIGITAL

C0AX,AL 0 @

©© ©

(White) (Redl (()range) t t t

DIGITAL

OPTICAL t

VIDEO

©

(Yeltow/ t

Video jacks and cable plugs

COMPONENTVIDEO

SVIDEO Y _

@ ©oo

(Green) (Bkle) (Red)

PR t t t t

Left and right analog audio cable plugs

Coaxial digital audio cable plug

Optical digital audio cable plug

Composite video cable plug

S-video cable plug

Component video cable plugs

•

Audio jacks

This unit has three types of audio jacks.

Connection depends on the availability of audio ,jacks on your other components.

AUDIO jacks

For conventional anak)g audio signals transmitted via left and right analog audio cables.

Connect red plugs to the right jacks and white plugs to the left jacks.

DIGITAL COAXIAL jacks

For digital audio signals transmitted via coaxial digital audio cables.

DIGITAL OPTICAL jacks

For digital _audit_si_nals_,transmitted via optical digital audio cables.

Notoa:

• You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. When you connect components to both the

COAXIAL and OPTICAL jacks, priority is given to the signals input at the COAXIAL jack. All digital input jacks arc compatible with digital signals with up to 96 kHz of sampling frequency.

• Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you arc not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust.

• Video jacks

This unit has three types of video jacks. Connection depends on tbe availability of input .jacks on your video monitor.

VIDEO jacks

For conventional composite video sign,s transmitted via composite video cables.

S VIDEO jacks

For S-vicleo signals, separated into the luminance (Y) and chrominance (C) video signals transmitted on separate wires of S-video cables.

COMPONENT VIDEO jacks

For component video signals, separated into the luminance (Y) and chrominance (P_, PR) video signals transmitted on separate wires of component video cables.

This unit is equipped with the video conversion function. See pages 17 and 82 lot details.

15 En

[[¶'tfff{_f|'tfF

HDMI compatibility with this unit

Audio signal types

2ch Lineal" PCM

Multi-ch Linear

PCM

DSD

Bitstream

Audio signal formats

2ch, 32-192 kHz,

16/20124 bit

8ch, 32-192 kHz,

16/20124 bit

2/5. I ch,

2.8224 MHz, 1 bit

Dolby Digital, DTS

Compatible

HDMI components

('D, DVD-Video,

DVD-Audio, etc.

DVD-Audio, etc.

SACD, etc.

DVD-Video, etc.

•

HDMI jack and cable plug

HDMI

HDMI cable plug

• Wc recomnlend that you use an HDMI cahle shorter than 5 meters ( 16 feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack <_- DVI-D jack) to connect this unit to other DVI components.

This unit's HDMI interface is based on the following standards:

• HDMI Version 1.2a (High-Definition Multimedia

Interface Specification Version 1.2a) licensed by

HDMI Licensing, LLC.

• HDCP Revision 1.1 (High-bandwidth Digital

Content Protection System Revision 1.1) licensed

by Digital Content Protection, LLC.

Notes

• When CPPM copy-protected DVD audio is played back, video and audio signals may not be output depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMl or

DVI components.

• You call check the potential problem about the HDMl connection (see page 41).

• Do not disconnect or connect the cable or turn off the power of the HDMl components connectcd to the HDMl OUT jack of this unit while data is being translierrcd. Doing so may disrupt playback or cause noise.

• Audio signals input at input jacks other than the HDMl lN 1or

HDMI lN 2 jack of this unit cannot be digitally output at the

HDMl OUT jack.

• If you turn off the power of the video monitor connected to the

HDMl OUT jack via a DVl connection, this unit may fail to establish the connection to the component.

• The analog video signals input at the composite video, S-video and component video jacks can be digitally up-converted to be output at the HDMI OUT jack. Set "VIDEO CONV." to "ON" in "MANUAL SETUP" (see page 81) to activate this feature.

16 En

•

Audio signal flow

DIGITAL AUDIO

(COAXIAL)

HDMI

Input

0

DIGITAL AUDIO

(OPTICAL)

AUDIO

--._-

......

Digital output

_> Analog output

Output

•

Video signal flow

Input

HDMI

Output

COMPONENT

VIDEO

$VIDEO

--4>

VIDEO

-_ Through i_ @

Video conversion ON (see page 82)

• 2-channel as well as mMlti-channel PCM, Dolby Digital and

DTS signals input at the HDMl lN 1 or HDMI IN 2jack can be output at the HDMI OUT jack only when "SUPPORT AUDIO" is set to "OTHER" (see page 77).

• Audio signals input at the HDMI IN jacks are not output at the

AUDIO output and DIGITAL OUTPUT jacks.

• When the analog video signals are input at the COMPONENT

VIDEO, S VIDEO and VIDE()jacks, the priority order of the input signals is as follows:

1. COMPONENT VIDEO

2. S VIDEO

3. VIDEO

• Digital video signals input at the HDMI IN 1 or HDMI IN 2 jack cannot be output from analog video output jacks.

• The analog component video signals with

480i (NTSC)/576i (PAL) of resolution are converted to the

S-video or composite video signals and output at the S VIDEO

MONITOR OUT and VIDEO MONITOR OUT jacks.

• This unit does not accept analog component video signals with

1080p of resolution.

• The OSD signal is not outpMt at the VCR OUT add DVR OUT jacks and is not recorded.

• Use the "HDMI UP-SCALING" parameter in "DlSPLAY SET" to deinterlace and convert the resolution of the video signals output at the HDMl OUT jack (see page 81).

17En

|¶'tlflf_f|qlF

Connect your TV (or projector) to the HDMI OUT,jack, the COMPONENT VIDEO MONITOR OUT ,jacks, the

S VIDEO MONITOR OUT jack or the VIDEO

MONITOR OUT ,jack of this unit.

Make sure that this unit and other components are unplugged from the

AC wall outlets.

You can choose to play back HDMI audio signals on this unit or

(m another HDMI component connected to the HDMI OUT jack of this unit. Use the "SUPPORT AUDIO" parameter in "SOUND

MENU" to select the component to play back HDMI audio signals (see page 77).

No a

Some video H_onitors connected to this Ltni[ via a DVI connection lail to recognize the HDMI audio/_ ideo signals being input il they are in the standby mode. In this case. the HDM1 indicator flashes irregularly.

18 En

............

xideo in

Component llf)M1 in

TV (or projector) indicates recommended connections indicates alternative connections n da

I_ components are unplugged fi'om the

AC wall outlets.

Make sure that this unit and other

• When "VIDEO CONV." is set to "OFF" (see page 82), be sure to make the same type of video connections as those made for your TV (see page 18). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.

• When "VIDEO CONV." is set to "ON" (see page 82), the converted video signals are output only at the MONITOR OUT jacks. To record a source, lnake the same type ol video connections between each component.

|

J

• To make a digital connection to a component other than the delault component assigned to each DIGITAL INPUT or

DIGITAL OUTPUT jack, select the corresponding setting lor

"OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "110

ASSIGNMENT" (see page 78).

• 11you connect your DVD player to both the DIGITAL INPUT

{OPTICAL) and the DIGITAL INPUT (COAXIAL)jacks, priority is gi_,en to the signals input at the DIGITAL INPUT

(COAXIAL) jack.

•

Connecting a DVD player

............

indicates recommended connections indicates alternative connections

19En

•

Connecting a DVD recorder, PVR or VCR

20 En

DVD recorder, PVR

Audk) out

•

Connecting a set-top box

,[

Satellite receiver, cable TV

receiver or HDTV decoder

='n''"

<

•

Connecting audio components

• To make a digital connection to a component other than the delhuh component assigned to each the DIGITAL INPUT jack or the

DlGlTAL OUTPUT jack, select the corresponding selling for "OPTICAL OUT", "OPTICAL lN", or "COAXIAL lN" in "l/O

ASSIGNMENT" (see page 78).

• Connect your turntable to the GND terminal of this unit to reduce noise in the signal. However, you may hear less noise without the connection to the GND terminal for some tm'ntables.

• The PHONO jacks arc only compatible with a turntable with an MM or a high-output MC c:,rlridge. "12_ output MC cartridge to the PHONO jacks, use an in-line boosting translk)rmer or an MC-head amplifier.

• When you connect both the DIGITAL INPUT (OFI'ICAL) jack and the DlGlTAL lNPUT (COAXIAL) jack to an audio component, the priority is given to the DlGlTAL lNPUT (COAXIAL)jack.

CD player indicates recommended connections indicates alternative connections

21 En

|¶'tlfl_f|'tlF

• Connecting an external amplifier

This unit has more than enough power for any home use. However, if"you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier to the PRE OUT,jacks. Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.

Notes

• When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals.

• The signals output at the FRONT PRE OUT jacks are al]iected by the TONE CONTROL settings (see page 48).

• Adjust the volume level of the subwoofer with the control on the subwoofer (see page 48).

• Some signals lllay not be output at the SUBWOOFER PRE OUT jack depending on the settings lot "SPEAKER SET" (see page 72) and "LFE/BASS OUT" (see page 72).

@ SUR.BACK

PRE OUT jacks

©

Surround hack channel output jacks.

When you only connect one external amplifier for the surround back channel, connect it to the SINGLE,jack.

®

FRONT PRE OUT jacks

[:ront channel output jacks.

@ SURROUND PRE OUT jacks

Surround channel output jacks.

@

• When "BI-AMP" is set to "ON", this unit outputs the fl'ont channel audio signals at the SUR.BACK PRE OUT jacks.

• The audio signals output at the SUR.BACK PRE OUT jacks dil'lier depending on the "EXTRA SP ASSIGN" setting (see page 72).

@ SUBWOOFER PRE OUT jack

Connect a subwoofer with a built-in amplifier.

@ CENTER PRE OUT jack

Center channel output jack.

•

Connecting a multi-format player or an external decoder

This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND

SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor and or preamplifier.

If you set "INPUT CH" to "8CH" in "MUUFI CH SET" (see page 80), you can use the input jacks assigned as "FRONT" in "MUUFI CH SET" (see page 80) together with the MUUFI CH INPUT jacks to input 8-channel signals.

Connect the output jacks on your multi-format player or external decoder to the MUUFI CH INPUT.jacks.

match the left and right outputs to the left and right input .jacks for the front and surround channels.

Be sure to

Notes

• When you select the component connected to the MUUFI CH INPUT jacks as the input source (see page 38), this unit automatically turns off the digital sound field processor, and you cannot select sound field programs.

• This unit does not redirect signals input at the MULTl CH lNPUT jacks to accommodate for missing speakers. Wc recommend that you connect at least a 5. l-channel speaker system belore using this lieature.

22 En

Multi-format player/External

decoder (5.1-channel output)

Multi-format player/External

decoder (7.1-channel output)

' 1The analog audio input jacks assigned as "FRONT" in

"MULTI CH SET" (see page 80).

.ql_lfqlf|°tl_"

•

Connecting a Yamaha iPod universal dock

This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a Yamaha iPod universal dock (such as the YDS- 10, sold separately) where you can station your iPod and control playback of your iPod using the supplied remote control.

Connect a Yamaha iPod universal dock to the DOCK terminal on the rear panel of this unit using its dedicated cable.

Use the V1DEO AUXjacks on the front panel to connect a game console or a video camera to this unit.

Caution

Be sure to turn down the volume of this unit and other components before making connections.

iiiiiiiiiiii_i_i_i_i!_!i_!!_!_!;i!i!_!iiiii!i!ii{_ii!i!ii{_ii!i!ii{_ii!i!ii{_ii!i!ii{_ii!i_!!i_!_;!_i_iiiiiii

.......................

• The audio signals input at the DOCK terminal on the rear panel take priority oxer the ones input at the VIDEO AUX jacks.

• To reproduce the source signals input at these jacks, select

"V-AUX" as the input som'ce.

Yamaha iPod universal dock

(such as the YDS-10, sold separately)

SWDEO WDEO • _ R O_T_L

• Using REMOTE OUT jacks

Connect the component which is the Yamaha product and have the capahility of the SCENE control signals to the

REMOTE OUT jack as follows.

Remote control in

1

Yamaha component

(CD or DVD player, etc.)

• If the components have the capability of the SCENE control signals, this unit can amomatically activate the corresponding components and start the playback when you use one of the

SCENE buttons. Relier to the owner's manuals for details about the capability of the SCENE conlrol signals of the components.

• Connect the REMOTE OUT jack of this unit and the remote control input jack of the components to control the components by using the SCENE feature.

• If the component connected to the REMOTE OUT jack is not the Yamaha product, set "SCENE IR" in the advanced setup menu to "OFF" (see page 93).

Game console or video camera

23 En

Both FM and AM indoor antennas are supplied with this unit. Connect each antenna correctly to the designated terminals.

In general, these antennas should provide sufficient signal strength.

"4+--

See page 8 for connection information of the supplied indoor FM antenna and AM loop antenna.

Notos

• The AM loop antenna should be placed away fl'om this unit.

• The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, install all outdoor antenna. Consult the nearest amhorized

Yamaha dealer or service center about outdoor antcnnas.

Indoor FM antenna

(supplied)

AM loop antenna

(supplied)

To the AC wall outlet

•

AC OUTLETS (SWITCHED)

Use these 2 outlets to supply power to any connected components.

Connect the power cable of your other components to these 2 outlets.

Power to these 2 outlets is supplied when this unit is turned on. However, power to these 2 outlets is cut off when this unit is turned off. For information on the maximum power or the total power consumption of the components these 2 outlets, see "Specifications" that can be connected to on page 106.

Outdoor AM antenna

Use a 5 to 10 m (16 to 33

_) vinyl covered wire extended outdoors from a wind ow.

Ground (GND terminal)

For maximum safety and minimum intcrfL,rence, connect the antenna GND tcrmilml to a good earth ground.

A good earth ground is a metal stake driven into moist eardl.

The power to AC OUTLETS of this unit is not cut off while this unit is charging connected iPod even when this unit is in the standby mode. When this unit completes chalging or lhe iPod is disconnected, the power is cut off automatically when this unit is in the standby mode.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode.

However, the stored data will be lost in case the power cable is disconnected from the AC wall outlet or if the power supply is cut off for more than one week.

24 En

Caution

If you are to use 6 ohm speakers, set "SP IMR" to

"6f2 MIN" as follows BEFORE using this unit. 4 ohm speakers can be also used as the front speakers.

•

Turning on this unit

Press @STANDBY/ON on this unit.

on the front panel to turn

1 Make sure this unit is turned off.

P.efer to the right cohunn for details.

2

Press and hold @TONE CONTROL on the front panel and then press @STANDBY/ON inward to the ON position to turn on this unit.

This unit turns on, and the advanced setup menu appears in the front panel display.

TO.E

While holding down

When you turn on this unit, there vdll be a 4 to 5-second delay beh)re this unit can reproduce so[ind.

•

Set this unit to the standby mode

Press @STANDBY/ON (or @STANDBY) to set this unit to the standby mode.

In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.

• You can also turn on this unit by pressing @SCENE (or

@SCENE) buttons.

• When you turn on this unit, there will be a 4 to 5-second delay belore this unit can reproduce sound.

3

Rotate the @PROGRAM selector on the

front panel to select "SP IMP.".

"SP IMP." and the current speaker impedance setting

("8f-) MIN") appear in the front panel display.

4 Press @TONE CONTROL on the front

panel repeatedly to select "6f_ MIN".

5 Press @STANDBY/ON on the front panel to save the new setting and turn off this unit.

The setting you made is rellected next time you turn on this m_it.

25 En

@@ Input signal indicators

Lights up when this unit is reproducing DSD (Direct

Stream Digital) or PCM (Pulse Code Modulation) digital audio signals.

@@@ Decoder indicators

The respective indicator lights up when any of the decoders of this unit fimction.

@ ENHANCER indicator

Lights up when the Compressed Music Enhancer mode is selected (see page 46).

@ HDMI indicator

Lights up when the signal of the selected input source is input at HDMI IN 1 or HDMI IN 2,jacks (see page 16).

@ SILENT CINEMA indicator

Lights up when headphones are connected and a sound field program is selected (see page 46).

@ DOCK indicator

Lights up when you station your iPod in a Yamaha iPod universal dock (such as the YDS-1(), sold separately) connected to the DOCK terminal of this unit (see page 23) and V-AUX is selected as the input source. The DOCK indicator also lights up when this unit is charging the battery of the stationed iPod in the standby mode.

@ Input source indicators

The corresponding cursor lights up to show the currently selected input source.

@ YPAO indicator

Lights up when you run "AUTO SETUP" and when the speaker settings set in "AUTO SETUP" are used without any modifications (see page 28).

@ Tuner indicators

Lights up when this unit is in the FM, AM or XM Satellite

Radio tuning mode (see pages 50 to 57).

@ MUTE indicator

Flashes while the MUTE fimction is on (see page 40).

@ VOLUME level indicator

Indicates the current volume level.

@ Sound field indicators

Light up to indicae the active sound fields (see page 42).

@ VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see page 46).

@ Headphones indicator

Lights up when headphones are connected (see page 40).

@ SP A B indicators

Light up according to the set of fi'ont speakers activated

(see page 38).

SP A: The FRONT A speakers are activated.

SP B: The FRONT B speakers are activated.

SPA B: The FRONT A and FRONT B speakers are activated.

@ NIGHT indicator

Lights up when you select a night listening mode (see page 49).

@ DSP indicators

The respective indicator lights up when any of the sound field programs are selected (see page 42).

26 En

.qlfll_If|°tl_"

@ Multi-information display

Shows the name of the current sound field progranl and other infommtion when adjusting or changing settings.

@ SLEEP indicator

Lights up while the sleep timer is on (see page 41).

@ 96/24 indicator

Lights up when a DTS 96124 signal is input to this unit.

@ Input channel and speaker indicators

LFE indicator

_m,_,_w_::}= Presence speaker indicators

X3

@1in

ut tors

{_{_ _ _ Surround

LFE indicator

Lights up when the input signal contains the LFE signal.

Input channel indicators indicate the channel components input signal.

of the current digital

Presence indicators and surround back speaker

Light up according to the number of presence and surround hack speakers set for "EXTRA SP ASSIGN"

(see page 72) and "SUR.B

L/R SP" (see page 73) in

"SOUND MENU" when this unit is in the auto setup

(see page 28) or the speaker level setting in "SOUND

MENU" (see page 74) procedure.

"4:--

•

Yotl can make settings for surround back speakers automatically by running "AUTO SETUP" (see page 28) or manually by adjusting settings lor "SUR.B L/R SP" (see page 73) in

"SOUND MENU".

• To use the presence speakers, set "EXTRA SP ASSIGN" to

"PRESENCE" (see pages 29 or 72).

The remote control transmits a directional infrared ray.

Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Remote control sensor

Approximately 6 m (20 ft)

+

I

0©00

1

{

>> > gg

}

L "_J

Infrared window (@)

Outputs infl'ared control signals. Aim this window at the component you want to operate.

@TRANSMIT indicator

Flashes while the remote cotm-ol is sending infrared signals.

Operation mode selector (@)

The function of some buttons depends on the operation mode selector position.

AMP

Operates the amplifier function of this unit.

SOURCE

Operates the component selected with an input selector button (see page 87).

TV

Operates the TV assigned to either DTV/CBL or

PHONO (see page 86).

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remotc control in the following types of conditions:

- places of high humidity, such as near a bath places of high temperatures, such as near a heater or stove places of extremely low temperatures

- dusty places

• To set the remote control codes liar other components, page 88.

see

27 En

This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically.

The supplied optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening environment.

2

Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel.

Notos

• Be advised that it is normal lor loud test tones to be output during the "AUTO SETUP" procedure.

• "11_achieve the best results, make sure the room is as quiet as possible while the "AUTO SETUP" procedure is in progress. If there is too much ambient noise, the results may not be satisfitctory.

• You can run "AUTO SETUP" using the system menu that appears in the OSD or in the Dont panel display. This manual uses the OSD illustrations to explain the "AUTO SETUP" procedure.

• Belore perlorming operations, set the operation mode selector on the remote control to (_)AMP.

• This unit uses the speakers connected to the FRONT A speaker terminals as the front speakers for the adj ustment.

Make sure of the following check points before starting the AUTO SETUP operations.

[21 Speakers are connected appropriately.

[21 Headphones are disconnected from this unit.

This unit and the video monitor are turned on.

[21 The connected subwoofer is turned on and the volume level is set to about halfway (or slightly less).

[21 The crossover frequency controls of the connected subwoofer is set to the maxinmm.

The room is sufficiently quiet.

II _

Omni-directional microphone

The folh)wing menu screen appears on the video monitor.

AUTO_ IfiEIqU

+ E',,'TRA EF' AESIGH

?FPOHT

B

F'RESEIqCE iqOHE

SETLIF', ......

AUTO

Eg!

.......

STPRT

HPTURAL

[_I]/[> ]:Seiect

Place the optimizer microphone at your

normal listening position on a flat level surface with the omni-directional microphone heading upward.

Optimizermicrophone

It is recommended that you use a tripod (etc.) to all]x the optimizer microphone at the same height as your ears would be when you are seated in your listening position. You call use the attached screw of a uipod (etc.) to fix the optimizer microphone to the tripod (etc.).

28 En

4

Press _<_ / L> to select the desired setting

for "EXTRA SP ASSIGN" and then press OV.

Extra speaker assignment

Selects the function of the speakers connected to the

EXTRA SP terminals.

Choices: FRONT B, PRESENCE, NONE

• When you use the alternative front speaker system (see page 38)

Select "FRONT B".

• When you use the presence speakers (see page 12)

Select "PRESENCE" to set the function of the speakers to the presence speakers.

• When you do not use the EXTRA SP terminals

Select "NONE" to deactivate the EXTRA SP terminals.

11 you select "ON" in "BI-AMP" (see page 93), you cannot select "PRESENCE" in "EXTRA SP ASSIGN".

Press _)<_ / E> to select "SETUP" and then

press O_.

Choices: AUTO, RELOAD, UNDO, DEFAUUF

• Select "AUTO" to automatically run the entire

"AUTO SETUP" procedure.

• Select "RELOAD" to reload the last "AUFO

SETUP" settings and override the previous settings.

• Select "UNDO" to undo the last "AUTO SETUP" settings and restore the previous settings.

• Select "DEt_AULT '' to reset the "AUTO SETUP" parameters to the initial factory settings.

• "RELOAD" or "UNDO" is available only when you have previously run "AUTO SETUP" and confirmed the rcsuhs.

• "RELOAD" or "UNDO" is not available whenyou change the settingof "BI-AMP" in the advanced setup (see page 93) or "EXTRA SP ASSIGN" in "SOUND MENU"

(see page 72).

)_17_a_da_:_qe_:_lj_`_lQ_ffff_[_y_•1#_li_(_a_a_f_I_1_i

Press _<_/_> to select the desired setting of

"EQ".

Parametric equalizer type i!!!(;!

Parametric equalizer adjusts the level of the specified frequency hands. This unit automatically selects the crucial frequency hands for the listening room and adjusts the level of the selected frequency hands to create a cohesive sound field in the room. You can select the type of the parametric equalizer adjustment from the following choices.

Choices: NATURAL, FLAT, FRONT

• Select "NATURAL" to average out the frequency response of all speakers with higher frequencies being less emphasized. Recommended if the FLNF setting sounds a little harsh.

• Select "FLAT" to average the frequency response of all speakers. Recommended if all of your speakers are of similar quality.

• Select "FRONT" to adjust the frequency response of each speaker in accordance with the sound of your front speakers. Recommended if your front speakers are of much higher quality than your other speakers.

Press (_V to select "START" and then press

(_IENTIER to start the setup procedure.

This unit starts the auto setup procedure. Loud test tones are output from each speaker during the auto setup procedure. Once all items are set, the

"AUTO:RESUUF' display appears in the OSD.

• During the auto setup procedure, do not perform any operation on this unit.

• Wc recommend that you get out of the room while this unit is in the auto setup procedure.

It takes approximately 3 minutes lot this unit to complete the auto setup procedure.

29 En

,ll_ll,l,l,lmlk'-li_ri11,r,flq, tlI

This unit performs the following checks:

Speaker wiring i.,.iiF;?.iMG

Checks which speakers are connected and the polarity of each speaker.

Speaker size SiZE

Checks the frequency response of each speaker and sets the appropriate low-frequency crossover for each channel.

Speaker distance [)i S[I::il".i(::E

Checks the distance of each speaker from the listening position and adjusts the timing of each channel.

Equalizing

C'l%i if",i 'i'"::

Cbecks and adjusts the tonal characteristics of all tbe speakers by tbe setting of "EQ".

Speaker level

L.EUEL.

Cbecks and at!justs the volume level of eacb speaker.

Tbe display cbanges as follows:

EXTRI:I SP I:ISSiGH

>FROI4T B

FIRESEi4E:E II[II4E

SETUP.

DT!

.......

÷ STI:IRT

......

I:IUTO

HJ:ffLIRPL

[.,k] '['_q ; U}='[/otjn

[..8 '[> ] _Seie,::t

IqLIT[I_ CHECK

IHITIgLIZiMG

÷ WIRIHG

SIZE 'DISTPHCE

LEUEL

CHECK CH=CEI'ITER

Iiili ........

[,¢,,]_E::¢i t

IqLITO_ RESULT

RE'_UL T

SP _

[!iST;

3'4'8.

14H3 'iT.84t i

÷ ?SET

Q:iHC:EL

[_] [_]:UF 'bobr,

[EMTER ]; En{er

The results displayed under "RESULT" are as follows:

Number of speakers :!!!;F:'

Displays the number of speakers connected to this unit in the following order:

Front/Back/Subwoofer

Speaker distance [:,]: S"i"

Displays the speaker distance from the listening position in the following order:

Closest speaker distance/Fartbest speaker distance

Speaker level i i.

Displays the speaker output level in tbe following order:

Lowest speaker output level/Higbest speaker output level

• If "E-10:INTERNAL ERROR" appears during the testing procedure, restart ITom step 4.

• If you selected other than "AUTO" in step 5, no test tones arc output.

• If an error occurs during the "AUTO:CHECK" procedure, the setop procedure is canceled and an error screen appears. For details, see "If an error screen appears" on page 32.

• When this unit detects potential problems during the

"AUTO SETUP" procedure, "WARNING" and the number of warning messages appears in the above of

"RESULT" (see page 32).

• Depending on the listening environment, "SWFR

PHASE:REV" appears during the "AUTO:CHECK" procedure and "S UBWOOFER PHASE" in "SOUND

MENU" (see page 74) is automatically set to

"REVERSE".

Press @A and then @ENTER to display the setup results in detail.

RESULT

SP : 3/4/8.

I

DIET: 14_ 8,'17_84t

LUL : .-9.6/-_6_5dB

)SET [:I:IHCEI_

[_] [T]::LIF 'Dc, vrl

[EHTER ] _ Er,t er

RESLILT :: i,21 R I HG

I

FR01qT L. ......

01: 1

D','a] '[>] _Se leek

[ EMTER ] : Return

T

30 En

)ll_llllt4lallldalai_._lela_.l;(alJ.'_:lQlffffJ[_Ylel#lBi_(alallall|g_I*lli

Press _)< / _> repeatedly to toggle between the setup result displays.

Press (_)A / V to toggle hetween the parameters in a results.

Results of the speaker connection and wiring

10 Press (_ENTER to return to the top

"AUTO:RESULT" display.

gUTCn RESULT

RESLILT

LUL : -9.0/+{,.5d17

# )SET CglIqC:EL

[ EHTER ] :IEnter

Results of the speaker distance from the listening position

11

Make sure the pointer is pointing at "SET"

and "CANCEL" and then press (_< / _> to

select "SET" or "CANCEL".

Results of the setting of each speaker size

Results of the parametric equalizerof each speaker

Results of the speaker output level

If you arc not satisfied with the results or want to manually adjust each parameter, use "MANUAL SETUP" (see page 69).

Notes

• The distances displayed in the "DISTANCE" results may be longer than the actual distance depending on the characteristics of your subwoofer.

• In the "EQ" results, difli:rent values may be set for the same frequency to provide finer adjustments.

gLITO_RESULT

RESULT

SP

DIST;

_ 3,4,'0_ I

LUL : =9, 8/'_{,,, '5d8

+ :_SET CFIHC:EL

[EIq_ER ] _Enter

Choices: SET, CANCEL

• Select "SET" to confirm the "AUTO SETUP" results.

• Select "CANCEL" to cancel the "AUTO SETUP" results.

12

Press @ENTER to confirm your selection.

The top "SET MENU" display appears in the OSD.

SET HEIIU

÷ ,PUTO SETUF I

,MAIIUPL SETLIFI

,S ZGHI_L ZHFO

[,,k]/["r] _ U_ i[Iciwr_

[ EI4TER] _Enter

13 Press (_SET MENU to exit from "SET

MENU".

14

Disconnect the optimizer microphone from this unit.

The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.

If you change speakers, speaker positions, or the layout of your listening environment, run "AUTO SETUP" again to recalibratc your system.

I

31 En

OlJll_iil,,l_l,r,li,r_r_.:#.lx_l.'_.l,r, .ll_l,l.l,lmlt'li_r111,r,flq.tl

I

• If an error screen appears

Press @/\ / V / <1 / _> to select "RETRY" or

"EXIT" and then press @ENTER.

The following display is an example when _%-9:USER

CANCEL" appears in the OSD.

I?LITO_ERROR

÷ E-9:LISER CI:IHCEL

_Olq _t o1=epate

?RETRV

EXIT

['4] '[>]:Select

[EI4TER ]_ Er,'_ er

Choices: RETRY, EXIT

• Select "RETRY" to retry the "AUTO SETUP" procedure.

• Select "EXIT" to exit from the '%UTO SETUP" procedure.

• If"WARNING" appears

When this unit detects potential prohlems during the

'%UTO SETUP" procedure, "WARNING" appears in the

"AUTO:RESULT" display. Check the warning messages to correct your speaker settings.

Warnings diller h'om errors in that warnings do not cancel the

"AUTO SETUP" procedure.

Make sure the pointer is pointing at

"WARNING" and then press @ENTER to display the detailed information about the warning.

The numher on the right of "WARNING" indicates the number of warning messages.

gUTO_ RESUL r

+ NPRIqII'4G (3 ?

RESULT

5P

DiST_

_ 3'4qD, I

14 J?, 17J_,ft

LUL _ -9,_?'+6.5dB

::SET CI:IHC:EL

Zl] 'ZT] ::UF 'Dc.,m,

Z EHTER ] : Er,t er

Press @<1 / C> repeatedly to toggle between the warning displays.

W FIR1'4 IqG_ W I

<CILIT ElF F'HIqSE> ee,!el' e Chalqlqe i

FL

C:EHTER

--

F'L

5L

SBL

F'R

5R

5BR

{43iD'] HEelect

EHTER ]:Return

• For details about each warning message, see the "AUTO

SETUP" section in "Troubleshooting" on page 99.

• When the corresponding warning message is not applicable to a speaker, '' " is displayed instead.

Press @ENTER to return to the top

"AUTO:RESULT" display.

32 En

This unit is equipped with 1g preset SCENE templates for wuious situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button:

SCENE 1: DVD Viewing

SCENE 2: Disc Listening

SCENE 3: TV Viewing

SCENE 4: Radio Listening

If you want to use other SCENE templates, you can select the desired SCENE templates from the SCENE template library and assign the templates to the selected SCENE buttons on the front panel and the remote control.

Select the desired SCENE template

Rotate the @INPUT selector (or set the

operation mode selector to @.AMP and then

press (_<:1 / C>) to select the desired template.

i"=i ii": i','i.-.., =.; .,.*.

i i.; .-..: =

3

Press the @SCENE (or @SCENE) button again to confirm the selection.

The selected SCENE template is assigned to the

SCENE button.

or

Front panel

Remote control

SCENE template library

(Image)

Assign the

SCENE template to the

SCENE button

• If you do not carry out any operation within 30 seconds

ITom the last operation in these steps, this procedure is amomatically canceled.

• Once the desired SCENE templates are assigned to the corresponding SCENE buttons, you need to set the input source of the SCENE template on the remote controh See page 85 lor details.

Press and hold the @SCENE button for 3 seconds.

(or @SCENE)

The indicator on the selected SCENE button on the front panel starts to flash, and the name of the currently assigned SCENE template appears in the front panel display.

3 seconds 3seconds

Q

Remote control

Front panel or

Flashes

L-':..-'i..

-= :..-" .i. t:::=i.=t .i. i" i':::=

33 En

•

Which SCENE template would you like to select?

Which source do you like to play back?

Which component do you

like for playback?

DVD

(DVD video,

_'_I Video sources

SCENE templates

DVD Viewing

DVD Movie Viewing

DVR

DVD Live Viewing

DVR Viewing

Default

SCENE buttons

©

....

SACD or DVD-Audio)

{ Music discs (CD,

Radio programs iPod

_,{ TV programs

_,,{ Video games

Vinyl records

DVD Disc Hifi Listening

Music Disc Listening

Disc Listening

@

CD CD Hifi Listening

CD Listening

CD Music Listening

TUNER (FM/AM) Radio Listening

@

]_,_,_,_[

1

XM XM Listening

To enjoy XM Satellite Radio programs, you need to connect the XM Mini-Tuner Dock (sold separately) and activate the service (see page 53).

DOCK iPod Listening i

' To listening to the iPod, you need to connect a Yamaha

iPod unixersal dock (sold separately) to this unit

(see page 58).

DTV/CBL

}_#_,,,,,,,,,{ V-AUX

PHONO

TV Viewing

TV Sports Viewing

Action Game Playing

RPG Playing

LP Record Listening

i

i

J i

j @

You can create your original SCENE templates by editing the preset SCENE templates.

See page 36 lor details.

34 En

• Preset SCENE templates descriptions

The ilhtstrations of the SCENE button in the following table indicate the assigned SCENE buttons in the default setting.

SCENE template Input source Playback mode Features

DVD Movie Viewing

DVD Live Viewing

DVR Viewing

Disc Hifi Listening

Music Disc

Listening

DVD*I

DVD*I

DVR

DVD*I

DVD*I

MOVIE

Sci-Fi

ENTERTAINMENT

Music Video

MOVIE Drama

PURE DIRECT

STEREO

2ch STEREO

CD Hifi Listening

I'

[[ LLLLLLL

CD*I

CD Listening CD*I

7ch STEREO

¸, [[ LLLLLLLLLL,

PURE DIRECT

CD Music Listening CD*I

STEREO

2ch STEREO

STEREO

7ch STEREO

Radio Listening

Select this SCENE template when you pl: 9 back movies on your DVD player.

Select this SCENE template when you enjoy the music live vide() on your DVD pla_er.

Select this SCENE template when you play back movies on your digital vide() recorder.

Select this SCENE template when you enjoy the high fidelity sound oi the mtlsic discs on your DVD player.

Select this SCENE template when you play back music discs on your DVD player.

Select t!_is SCENE template w!!en you play hack music sources on your DVD player as the background _imsic.

[ LLLLLLLLLLLLLLLLLLLLLLLLLLLL

Select this SCENE template when you enjoy the high fidelity sound ol the mtlsic discs on your CD player.

Select this SCENE template when you play back music discs on your CD player.

Select this SCENE template when you pta 3 back music source on your (D player as the background music.

Select this SCENE template when you enjoy FM or AM

XM Listening iPod Listening

XM

DOCK (V=AUX)

MUSIC

ENHANCER

7ch Enhancer

MUSIC

ENHANCER

7ch Enhancer

Select this SCENE template when you enjoy XM Satellite

Radio programs.

Select this SCENE template when you ph 9 back music on your iPod stationed in a Yamaha iPod universal dock.

Select !his SCENE templat € when you et{ioy general

TV Sports Viewing

Action Game

Playing

RPG Playing

DTV/CBL

V-AUX.2

ENTERTAINMENT

Sports

ENTERTAINMENT

Action Game

Select this SCENE template when you enjoy sports programs on your TV.

Select this SCENE template when you play action games such as car racing and FPS games.

L.P Record Listening

V-AUX.2

PHONO

ENTERTAINMENT

Roleplaying Game

PURE DIRECT

When the connected capability

DVD of the SCENE player conu'ol or ('D signals player has the and is connected the REMOTE OUT jack of this unit, this unit operates the

DVD player or CD player worked with the SCENE li:atures.

to

Select this SCENE template when you play role-pla3ing games.

Select this SCENE template when you play back vinyl records on your turntable.

'2 You can select "V-AUX" as the input source even if your iPod is stationed in the Yamaha Universal Dock connected to this unit.

I

35 En

YOu can create your original SCENE templates for each

SCENE button.

YOU can refer to the preset 18 SCENE templates to create the original SCENE templates.

Select the desired SCENE template

Create an original SCENE template

SCENE template library

(Image)

Press @A / V to select the desired parameter

of the SCENE template and then (_)<1 / c> to select the desired value of the selected parameter.

You can adjust the following parameters for a SCENE template:

•

•

INPUT:

MODE:

The input source component.

The active sound field programs,

STRAIGHT or Pure Direct mode.

• NIGHT:

SYSTEM:

The night listening mode (see page 49).

Keeps mode.

the current night listening

CINEMA:

MUSIC:

Sets the night listening mode to the

CINEMA mode.

Sets the night listening mode to the

MUSIC mode.

4

Press the @SCENE button again to confirm the edit.

Assign the SCENE template to the

SCENE button An asterisk mark (*) appears by the name ol the original SCENE template.

1 Turn on the video monitor connected to this unit.

2

Set the operation mode selector to @AMP and then press and hold the desired

@SCENE button for 3 seconds.

The SCENE template customizing screen appears on the video monitol:

.:,_Elqk_ v IilF'LIT; [:,lid

STRI:IZGHT

HIGHT;

[ EMTER

S',ISTEI'i

3_ g:en_J,_e

{ :I.'EI/E.

3_ -_E,

When the SCENE template you *._antto customize is not assigned to any ol the @SCENE buttons, press @<_ / C> repeatedly to recall the desired SCENE template on the lltenut screen.

• Once the desired SCENE templates are assigned to the corresponding (DSCENE buttons, you need to set the input source ol the SCENE template on the remote controh See page 85 lot details.

• You can create a customized SCENE template lot each SCENE button, and il you create another customized SCENE template, this unit o',er_rites the old customized SCENE template _aith the new one.

• The nevdy created template is only ax ailable lor the assigned

SCENE button.

•

Renamethe SCENE templates

Select the name of the SCENE template at step 3

of "Creating your original SCENE templates" and then press (_)ENTER.

• Press I_)A / V to select the desired character.

• Press @<1 / C:>to place an "_" (underscore) under the space or the desired charactel:

• Press @RETURN to cancel the new name.

• Press (_ENTER to confirm the new name.

36 En

Caution

Extreme caution should be exercised when you play back CDs encoded in DTS.

If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers.

Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a

CD encoded in DTS.

To play DTS-encoded CDs when using a digital audio connection, set "DECODER MODE" in "lNPUT MENU" to

"DTS" before the playback (see page 80).

Before perli_rming the li_llowing operations, set the operation mode selector on the remote control to @AMP.

Start playback on the selected source component or select a broadcast station.

• Refer to the operating instructions for the source component.

• See page 50 for details about tuning instructions.

• See page 54 for details about XM Satellite Radio tuning instructions.

Rotate @VOLUME (or press @VOLUME +/-) to adjust the volume to the desired output level.

• See page 48 to adjust the level of each speaker.

• This does not affect the AUDIO OUT (REC) level.

• You can set tbe initial volulne level and lllaxilltLtlHvolullte level (see page 77).

Rotate the @PROGRAM selector (or press

one of the sound field program selector buttons ((_)) repeatedly) to select the desired

sound field program.

The name of the selected sound field program appears in the front panel display. See page 42 for details about sound field programs.

Turn on the video monitor connected to this unit.

See page 4(1 to display the input source inlimnation on the video monitor.

Rotate the @INPUT selector (or press one of the input selector buttons (@)) to select the desired input source.

The name of the currently selected input source appears in the fi'ont panel display for a few seconds.

Available input sources i vcR Dw V-A0X DW_Bt _DVD MD,_DR TUNE_ CD XM

I ""'-.i:::=ir

::

"?i.i "?

PHON_

/

%

Currently selected input source

The corresponding input selector button on the remote control for the currently selected input source lights up li)r approximately 5 seconds after you press any buttons on the remote control, showing which source component is currently being operated.

c:'.....i --i:::".i

Currently selected sound field program

Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source {see page 38).

• Choose a sound field program based on your listening preference, not merely on the name of the program.

• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

• To display information ahout the currently selected sound field program in the OSD, see page 61 R_r details.

37 En

•

A quick guide to contents

When you want to...

Enjoy pure hiq'_ stereo sound

Adjust the tonal quality of the front speakers

Adjust the parameters ol sound field programs

Enjoy sources with a wide dynamic range at night

Use headphones

Enjoy multi-channel sources in 2-channel stere()

Select a decoder to pla 3 back sources with

Automatically set this unit to the standby mode

40

49

66

41

See page

48

48

6I

49

Use this feature to turn the front speaker system (FRONT

A and/or FRONT B) on or off.

Press @SPEAKERS on the front panel repeatedly to turn on or off the set of front speakers connected to the FRONT A and/or

EXTRA SP speaker terminals.

The active front speaker set changes as follows.

I FRONT A _

OFF _-

FRONT B l and

FRONT B

Use this feature to select the component connected to the

MUUFI CH INPUT,jacks source.

(see page 22) as the input

Rotate the @INPUT selector to select MULTI CH

(or @MULTI CH IN).

"MULTI CH" appears in the front panel display.

Use "MUUI'I CH SET" menu in "INPUT MENU" to set the parameters liar MUUFI CH INPUT (see page 80).

Note

Sound field programs and the night listening mode cannot be selected when the component connected to the MUUFI CH lNPUT jacks is selected as the input source.

• FRONT A arid B or FRONT B setting is not available when

"EXTRA SP ASSIGN" is set to "PRESENCE" or "NONE"

(see page 72).

• Turn tit the volume level of this unit when you switch the fl'ont speaker setting.

• Using the Zone B feature

When you set "FRONT B" to "ZONE B" (see page 72), you can use the speakers connected to the EXTRA SP speaker terminals in another room (Zone B).

Press @SPEAKERS on the front panel repeatedly to turn on or off the Zone B speakers.

When you activate the Zone B speakers, all the speakers in the main room are nmted.

• You cannot activate both the main room and Zone B speakers simultaneously.

• If you select ClNEMA DSP sound field program and activate the Zone B speakers, Virtual CINEMA DSP activates automatically {see page 46).

38 En

This unit comes with a variety of input jacks.

Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source.

-#.

• We recommend that you set the audio input jack select to

"AUTO" in most cases.

• You carl adjust the default audio input jack select of this unit by using "AUDIO SELECT" in "OPTION MENU" (see page 83).

YOUcan display the operating information of this unit on a video monitor.

1 Turn on the video monitor connected to this unit.

Press @AUDIO SELECT (or @AUDIO SEL) repeatedly to select the desired audio input jack select setting.

Available input sources

2

Set the operation mode selector to @AMP and then press (_DISPLAY on the remote control.

The current stares screen appears in the OSD.

STRTLIS i,ICIUIE

Eci-Fi ilJPUT_ DU[,

I:h,SEE a HI,Hi

NIGHT: OFF

_vcR Dw V-AU× Dr_BL _DW MDJCD_ 1UN_ CD XM _0N i I:::i.. ':::;i:::]

::

I:::I] ]"i"_"l_

Currently selected audio input jack select setting

You can select the amo{mt of tilne that the current status is displayed in the OSD by using the "OSD-AMP" parameter in "OPTION MENU" (see page 82).

]::4UT0

H[:'Hi

]74Hl:::]L.()I]_

Automatically selects input signals in the lk_ltowing order: (I) t lDMI (2) Digital signals (31 Analog signals.

Selects onl} tlDMI signals.

When III)MI signals are not input, no sound is output.

Automaticatl} selects input signals in the following order: (I) Digital signals input at the COAXIAL .jack. (2) Digital signals input at the Ot TI(AL jack.

When no signals are input, no sound is output.

Selects only analog signals.

If no analog signals are input, no sound is output.

The OSD signal is not output at the VIDEO output jacks and x_ill not be recorded.

This feature is not availahle when no digital input jacks

(OPTICAL, COAXIAL and HDM1) arc assigned. In addition,

HDMI is not available as an audio input jack select setting when the HDM1 IN 1 and HDMI IN 2 jacks arc not used. Use "110

ASSIGNMENT" in "INPUT MENU" to reassign the respective input jack (see page 78).

39 En

Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on

the front panel.

You can combine a video image from a video source with sound from an audio source.

For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor:

Press the input selector buttons (@) on the remote control to select a video source and then an audio source.

Audio sources--

Video sources--

When you select a sound lield program, SILENT CINEMA mode acti_ates autonmtically/see page 46).

Notes

• When you connect headphones, no signals are output at the speaker terminals.

• All Dolby Digital and DTS audio signals are mixed down to the left and right hea@hone channels.

Set the "BGV" parameter in the "MULTI CH SET" menu to the desired setting to select the defimhbackground video input source of the MUKI'I CH INPUT sources (see page 80).

Press @MUTE on the remote control to mute the audio output.

Press @MUTE again to resume the audio output.

YOUcan display the format, sampling frequency, channel, bit rate and flag data of the current input signal.

Set the operation mode selector to @AMP

and then press @SET MENU on the remote control.

The top "SET MENU" display appears in the OSD.

• You can also rotate @VOLUME on the fl-ontpanel or press

@VOLUME +/- to resume the audio output.

• Youcan adjust the muting level by using the "MUTETYPE" parameter in "SOUND MENU" (see page 76).

• The MUTE indicator flashes in the front panel display when the audio output is muted and disappears Dora the front panel display when the audio output is resumed.

SE_

, gLITO SETUP

, t,glllLIgL SETUP

,5iGHI_L IIIFIZI i'IEHLI

[ EI4TER ] ; En'k,>_....

Press (_)V repeatedly to select "SIGNAL

INFO" and then press @ENTER.

The audio information about the input source appears in the OSD.

3

Press @<1 / C>to toggle between the audio and video information displays.

4 Press @SET MENU on the remote control

again to exit from "SET MENU".

40 En

• Audio information

i:['i"li:::,i','ii"FV Signal iorlll;lt.

_¢Vhen this unit c;tnnot detect digital signal, it automaticatI} switches to analog input.

a

....,::."i"li','ii:::,iq....q.

i..i_'::: The ntlf;]ber of samples per second taken from a continuous signal to make a discrete signal.

i...,i::' r..r".,__...

Tile number of source channeis in tile input signal d'rontlsurroundlLFEl. For example, a multi-channel soundtmck with 3 Iront channels. 2 surround channels and LFE. is displa>ed as 3/2/0.1".

Tile number ol bits passing_a given point per second.

li='iL..r"p...ll"'l'::: Fla_ data encoded in DTS. Dolby Di_itah_or

PCM signals that cue this unit to automatically switch decoders.

Set the operation mode selector to @AMP and

then press @SLEEP repeatedly to set the amount of time.

Each time you press @SLEEP, the front panel display changes as shown below.

The SLEEP indicator flashes while you are switching the amount of time for the sleep timer: Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.

Flashes

" - " appears x_hen this unit cann( t display the corresponding inl ()rmation.

•

Video information

" li"ai"d','i T.I.

'

Tyt)e ol tile source xideo signals and tile xideo signals output at tile IIDMI OtJT jack o{ this unit.

_a.i'r.._........,i='i="::[" Resolution oi tile input signal (mmtog or

HDMII and tile output signal (HI)MII.

When input xideo signals are composite xideo or S-x ideo signals, tile input xideo signals are indicated as Composite" or

S-Video".

i..,ii",m.i"r i:::'i:::,i=,i'=li=, i H.FI

i.L

L..F..F,J..JF..

Error message Ior HDMI sources or connected Ill)Nil dexices. See page 99 h)r details.

...., =,,,, =,,,, =,,,, : ,:, .:,,, ,,,,, : i ,:, :i

Lights up

¢" "r' ["_ ¢"_ T ¢" i _ "r'

2) i r%i"i .L _.::ii"i i

_' _ ......

•

Canceling the sleep timer

Press @SLEEP on the remote control repeatedly

until "SLEEP OFF" appears in the front panel display.

Disappears

"---" appears when this unit cannot displa) the corresponding inlormation.

(

_:::iii:::'i:::'i:::' i"i i:::'i::"

...., =,,,, =,,,, =,,,, : ,,,,, : :

The SLEEP indicator turns off, and "SLEEP OFF" disappears fl'om the front panel display after a few seconds.

Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off"any external components connected to the AC OUTLETS (see page 24).

The sleep timer setting can also be canceled by pressing

@STANDBY (or _)STANDBY/ON) to set this unit to the standby mode.

Even il this unit is in the standby mode, this unit does not cut oll the power to AC OUTLETS while charging connected iPod

{see page 24).

41 En

This unit is equipped with a variety of precise digital decoders that alh)w you to enjoy multi-channel playback from almost any stereo or multi-channel sound source.

This unit is also equipped with a Yamaha digital sound field processing

(DSP) chip containing several sound field programs which you can use to enhance your playback experience.

• The Yamaha HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in actual concert halls, music venues, movie theatcrs, etc. Thus, you may notice variations in the strength of the reflections coming li:om the front, back, left and right.

• You can change sound field parameters.

See page 61 R)r details.

Rotate the @ PROGRAM selector (or set the operation mode selector to @AMP and then

press one of the sound field selector buttons ((_) repeatedly).

The name of the selected sound field program appears in the front panel display and in the OSD.

Notes

• When you select an input source, this unit automatically selects the last sound field program used with the con:esponding input source.

• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source {see page 38).

• When you play back DTS 96124 sources with any sound field program, this unit applies the selected program without activating the DTS 96124 decoder.

• Sampling ITequencies higher than 48 kHz are sampled down to

48 kHz or lower and then sound field programs are applied.

• When the sampling frequency of the input sources are higher than 96 kHz, this unit does not apply any sound field programs.

Select a sound lield program based on your listening prelerence, not merely on the name ol the program, etc.

Remote control button

Category of the program

Name of the program

Created sound fields

CINEMA DSP or

HiFi DSP

!

This plogi'_tnl

YOU UaII enioy background clearly a variet} illtlgic repioduces the Jinely ol cinenlatographically elaborated created sound virlual degign spaces of the lares{ reproduced science I_ction with clear aiId separation special eJ]_:ctg between leattlring dialog, nlovies

SODIId efii_cts {tiid

DSP LEVEL

P.INIT.DLY

P.ROOMSIZE

S.INIT. DLY

S. ROOM SIZE

SB INL DLY i

Available sound field parameters (see page 63)

SB ROOM SIZE

DIALG. LIFT

Program description

Sound field indicators

Surround Ieit sound field

Presence sound field r

_ . Listening position

Surround right sound field

Surround back soundfield

42 En

N'r_lffq_.l.,o.,_,,,_

•

For audio music sources

For audio music sources, _,,_ealso recomYTtend thai you use the Pure Direct mode {see page 48).

• The available sound field parametcrs dilTcr depending on the settings of the speakers.

• "DIALG.LIFT"

CLASSICAL

Q_ is available only when "EXTRA SP ASSIGN" in "SPEAKER SET" is set to "PRESENCE"

[ .......................

[]

" [

(see page 72).

HiFi DSP

This sound lield simulates a concert hall _\ith approximately 2500 seats in Munich, using stylish _ood lbr the interior linishing as normal standards ior European concert halls. Fine, beautiful reverberations spread richly, creating a calming atl;losphet_?.

The listener's virttlal seat is at the center leit ol the arena.

DIALG.LIFT

DSP LEVEL

INIT. DLY

ROOM SIZE

LIVENESS

(_

[ 1..........1 " [

HiFi DSP

This is an approxit;mtely 1700-seated, middle-sized concert halt v,,ith a shoebox shape thai is traditional in Vienna. Pillars and ornate carvings create extremely complex reflections frot;_ all arotmd the audience, producing a very lull, rich sotmd.

DSP LEVEL

INIT.

DLY

ROOM SIZE

LIVENESS

DIALG.LIFT

i ,i i i_,,, _,,, i i =1 i1 _ il,"i,::_i','l{,"ill:,si.", [] CLASSICAL

Q_) HiFi DSP

This prograt;_ creates a relatively wide space with a high ceiling like an audience halt it] a palace.

It offers pleasant reverheralions that :ire suitable Ior courtly _;msic and chamber music.

DSP LEVEL

INIT.

DLY

LIVENESS

REV.TIME

REV.DELAY

REV.

LEVEL

DIALG.LIFT

(_ [] HiFi DSP

This prograt:_ simulates a live house with :l 1o% ceiling and hot:_ey atmosphere.

A realistic, live sotmd field lealnres pov,,erful sotmd :is ii the listener is in a row in front o{ a small stage.

DSP LEVEL

INIT.

DLY

ROOM SIZE

LIVENESS

DIALG.LIFT

.........

@ L.:i:i.)E/ (::L.=Lii!!!', _=:',..r:.:.,..i

Ti,e .....

il_e.iii.,i:..i'e

This is the sotmd field ol a rock mtlsic Ii_,e hotlse in Los Angeles, with approximately ol the hall.

" HiFi

DSP

460 seats. The listener's _,irtual seat is at the center Ieit

DSP LEVEL

INIT. DLY

ROOM SIZE

LIVENESS

REV.TIME

REV.DELAY

REV. LEVEL

DIALG.LIFT

.........

(9

[

L.:i:i.)E/(::L.=Lii!!!

I ........1

[]

[

HiFi DSP

This is the sound f_eld at stage lront in The Bottom Line, a lamous New York,jazz club. The floor can seat 300 people to the felt and right in a sotmd f_etd ollering real and _,ibrant sotmd.

DSP LEVEL

INIT. DLY

ROOM SIZE

LIVENESS

DIALG.LIFT

43 En

l',-x,lr11 llffli/_

•

For various sources

• The available sound field parameters and the created sound fields difl_r depending on the input sources and the settings of this unit.

• "DIALG.LIPT" is a_ailable only when "EXTRA SP ASSIGN" in "SPEAKER SET" is set to "PRESENCE" (see page 72).

I

Eiqi_ERiT4i i"4ME{".i[

[ .... J " [

Ic,_M.,,a._

This program alIows the listeners to enjoy stere() sport broadcasts and studio variety programs with enriched live ieeling. In sports broadcasts, the voices of the commentator and sportscaster are poskioned clearly at the center while the atmosphere ol:the stadium expands in an optimum space to olTer the listeners with a leeting of presence in the stadium.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

Ei"4TERTF4

[ ........ J " [

I,:,,,,E,'.',A_

This sound field has been suitable Ior action games such as car racing and FPS games. It uses the reltection data that limits the eilects range per channel in order to ()tier a powerl_ulplaying environment with a being4here leeling by enhancing various effects tones while maintaining a clear sense of directions.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

Ei.4IERII:4ii.4MEbiT

t

:;;:,:::,iePia'::<i.r,g (!!iar,_,_ _._

" [

IC,"*_MA,_

This sound field has been suitable ior role-playing and adventure games. It combines the sound field effects for movies and the sound field designs for _Action Game" to represent the depth and 3D feeling of the field during play, while offering movieqike surround effects in the movie scenes in the game.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

•

For visual sources of music

Not_

• The available sound field parameters and the created sound fields diflbr depending on the input sources and the settings of this unit.

• "DIALG.LIPT" is a\ ailable only when "EXTRA SP ASSIGN" in "SPEAKER SET" is set to "PRESENCE" (see page 72).

[ ....... I " [

I_,,_M_

This sound field oilers an image of a concert halt lor live perlbmmnce ol pop, rock and .jazz music. The listener can indulge onesell in a hot live space thanks to the presence sound field that emphasizes the vividness ol vocals and solo play and the beat ol rhythm instruments, and to the surround sound field that reproduces the space ol a big live hall.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

44 En

•

For movie sources

You can select the desired decoder used _ith lolloxdng sound field program {except "Mono Movie"). See page 66 lor details.

• The available sound field parametcrs and the created sound fields dill'or depending on the input sources and the settings of this unit.

• "DIALG.LIFT" is available only when "EXTRA SP ASSIGN" in "SPEAKER SET" is set to "PRESENCE" (see page 72).

(.€,J

1

I_,N_M,,=_

This program creates a som_d field emphasizing the surrounding ieeling without disturbing the original acoustic positioning ol mulfi-channd audio such as Dolby Digital and DTS. It has been designed with the concept ol *'an ideal movie theater", in which the audience is surrounded by beautiM revefl_erations lrom the leit, right and rear.

DSP LEVEL

S. INIT. DLY

S. ROOM SIZE

S.LIVENESS

SB INI. DLY

SB ROOM SIZE

SB LIVENESS

DIALG.LIFT

..... 1 1 1 " 1

This pi*>gramrepresents the spectacular l_teling of large-scale movie productions.

It reproduces a broad theater sound field matching the cinemascope and wider-screen c}ovies with an excellent dyna_:}icr:tnge fro_:}very s_:}atlto extremely large sotmd.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

1 1 " 1

I_,_,_.._

This program clearly reproduces the finely elaborated sound design ol the latest science fiction and special efl_tctsq)aturing movies.

You can enjoy a variety ol cineI:_alographicalty created virttlal spaces reprodtlced with clear separation between dialog, sotmd effects and background music.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

......1

1 1 " 1

This pi*_grarnis ideal for preciselyreproducing the sotmddesign ol action and adventuremovies.

The sound field restrains re_erberations but puts emphasis on reproducing a poweriht space expanded widely to the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio channels and the clarity ol the sound.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

..... 1 1 1 "_ 1

This sotmdfield fl?aturesstable reverberationsthat c}atch a wide range of movie genreslrom seriousdramas to musicals andcomedies.The

revefl_erations are modest but offer an optimum 3D fl?eling, reproducing efli?cts tones and background music softly but cubically around clear words and center positioning in a wa_ that does not latigue the listener even alter long hours ol viev\ing.

DSP LEVEL

P. INIT. DLY

P. ROOM SIZE

S. INIT. DLY

S. ROOM SIZE

SB INI. DLY

SB ROOM SIZE

DIALG.LIFT

MOVIE

1 i','i_"_ii 'r i:::'

I .....

'I i:::,

I

[]

" 1

]

C_NEIVIA =_

This program is provided lhr reproducing monaumt video sources such as a classic movie in an atmosphere of a good old movie theater.

The program produces the optimum expansion and reverberation to the original audio to create a comiorlable space with a certain sound depth.

DSP LEVEL

INIT. DLY

ROOM SIZE

LIVENESS

REV.TIME

REV.DELAY

REV. LEVEL

DIALG.LIFT

45 En

l-x, lrlir, lt_l',l,,iillql_llib

• Stereo playback

The axailable parameters diller depending on the input sources and the settings ol this unit.

Use this program to mix down multi-channel sources to 2 channels. See page 49 R)r details.

DIRECT

...... 1 [ ]

......

--

-1

HiFi DSP

Use this program to output sonnd IroI;1 all speakers. When yon pla 3 back nmhi-channeI sources, this unit dov,.nmixes the source to 2 channels, and then otltptlts the sotmd from all speakers. This progmtu creates a larger sotmd field and is ideal Ior background nmsic at parties, etc.

CT LEVEL

SL LEVEL

SR LEVEL

SB LEVEL

PL LEVEL

PR LEVEL

•

The Compressed Music Enhancer

Use this program to play back compression artiihcts in 2-channel stere().

Effect level

ENHAUCER

(E)

7,".i.',i:::'_.',i.',.:::,_.",,".,:::,_ -.......

Use this program to play back compression artilacts in 7-channeI stere().

Effect level

• Using sound field programs without surround speakers

(Virtual CINEMA DSP)

Virtual CINEMA DSP allows you to enjoy the CINEMA

DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field.

When you set "SUR. L/R SP" to "NONE" (see page 73),

Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP or HiFi DSP sound field program (see page 42).

-_ -_ -_

•

Enjoying multi-channel sources and sound field programs with headphones

(SILENT CINEMA)

SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones.

SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or

HiFi DSP sound field programs (see page 42). When activated, the SILENT CINEMA indicator lights up in the front panel display.

Virtual CINEMA DSP will not activate even when "SUR. L/R

SP" is set to "NONE" (see page 73) in the lifllowing cases: when the component connected to the MUKI'I CH INPUT jacks is selected as the input source (see page 38).

- when headphones are connected to the PHONES jack.

when this unit is in the "7ch Stereo" mode.

• SILENT CINEMA does not activate when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 38).

• SILENT CINEMA is not efli:ctive when the Pure Direct (see page 48) or "2ch Stereo" mode (see page 49) is selected, or when this unit is in the "STRAIGHT" mode (see page 47).

46 En

Bdore perlornfing the lollo_ing operation, _;d the operation lnode sdector on tl_e rmnote control to _)AMP.

When this unit is in the "STRAIGHT" mode, 2-channel stereo sources are output from only the front left and right speakers. Multi-channel sources are decoded straight into the appropriate channels without any additional effect processing.

Press _STRAIGHT

"STRAIGHT".

(or (_STRAIGHT) to select

.D

i r_:.H

.i. _.:ir"i i

•

Deactivating the "STRAIGHT" mode

Press _STRAIGHT (or _)STRAIGHT) so that

"STRAIGHT" disappears from the front panel display.

The sound effect is turned back on.

47 En

Belore perlorming the lollo`sing operations, set the operation lnode selector on the remote control to @AMP.

You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MUKFt CH INPUT,jacks.

Use the Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When the Pure Direct mode is activated, this unit plays back the selected source with the least circuitry.

Press @PURE DIRECT (or @PURE to turn the Pure Direct mode on or off.

DIRECT)

The @PURE DIRECT button lights up while this unit is in the Pure Direct mode.

The fi'ont panel display automatically dims.

Noto

• The lollo`sdng operations are not possible when this unit is in the Pure Direct mode:

- switching the sound field program displaying the OSD

-adjusting the "SET MENU" parameters (except lor level settings)

-operating video functions {video conversion, etc.)

• The Pure Direct mode is autoulatically canceled `s,henexer this unit is tumed ofl.

The lront panel display turns on momentarily `shen an operation is performed.

.....

This operation ,sill (`serride the level adj [lstments made in

"AUTO SETUP" (see page 28) and "SPEAKER LEVEL" (see page 74).

1 Press ©LEVEL on the remote control repeatedly to select the speaker you want to adjust.

Ii27i1::' li

,2:*i lid i

,::7i iiD i1::, iD

F:'I:?.H'.!i1:?.

Front lelt speaker

Front right speaker

C p k g[lb`s ooler g[trro[nld lelt speaker

Surround right speaker

Surround back lelt speaker

Surround back right speaker

Presence left speaker

Presence right speaker

Use this feature to adjust the balance of bass and treble for the front left and right speaker channels.

-&

Speaker and headphone adjustments are stored independently.

Press @TONE CONTROL on the front panel repeatedly to select the high-frequency response (TREBLE) or the low-frequency response (BASS).

_) Rotate the @PROGRAM selector to adjust the high-frequency response (TREBLE) or the low-frequency response (BASS).

• Once you press @LEVEL on the remote control, you can also select the speaker by pressing @5 / V.

• Instead of "SUR.B.L" and "SUR.B.R", "SUR.B" is displayed if "SUR.B L/R SP" is set to either "SMLxI" or

"LRGx 1" (see page 73).

• The available speaker channels difl'cr depending on the setting of the speakers.

Press @<1 / c> to adjust the speaker output level.

• Press (_)C:>to increase the value.

• Press @<1 to decrease the value.

Control range: 10.0

dB to 10.0 dB

• If you increase or decrease the high-frequency or the lowfl'equency sound to an extreme level, the tonal quality of the surround speakers may not n_atch.

• TONE CONTROL is not elli_ctive when PURE DlRECT is selected, or when MUUFI CH lNPUT is selected as the input source.

48 En

You can mix down multi-channel sources to 2 channels and enjoy playback in 2-channel stereo.

Press ®STEREO repeatedly to select on the remote

"2ch Stereo".

control

"4¢--

OUT" is set to "SWFR" or "BOTH" (see page 74).

• You carl also select tile "2ch Stereo" mode by rotating tl_e

@PROGRAM selector on the l]'ont paneh

• See page 66 lor details about the parameters of the "2ch Stereo" mode.

The night listening modes are designed to improve listenability at lower volumes or at night.

Press ®NIGHT on the remote control repeatedly to select "NIGHT:CINEMA"

"NIGHT:MUSIC".

or

Choices: NIGHT:CINEMA, NIGHT:MUSIC, Ot:[:

• Select "NIGHT:CINEMA" when watching films to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes.

• Select "NIGHT:MUSIC" when listening to music sources to preserve ease-of-listening for all sounds.

• Select "OFF" if you do not want to use this feature.

"4¢--

When a night listening mode is selected, the NlGHT indicator lights up in the front panel disphty.

Press @<1 / E> to adjust the effect level while

"NIGHT:CINEMA" or "NIGHT:MUSIC" is displayed in the front panel display.

i:::.'F T' _:::= .i.i...'

Choices: MIN, MID, MAX

• Select "MIN" for minimum compression.

• Select "MID" for standard compression.

• Select "MAX" for maximum compression.

"4¢--

"NIGHT:CINEMA" and "NIGHT:MUSIC" adjustments are st(_red independently.

Noto

• You cannot use the night listening modes in the lollowing cases:

-when the Pure Direct mode (see page 48) is selected.

-when the component connected to the MUUFI CH lNPUT jacks is selected as the input source (see page 38).

-when headphones are connected to the PHONES jack.

• The night listening modes may vary in el]'cctiveness depending (m the input source and surround sound settings yo[l use.

49 En

There are 2 tuning methods: automatic and manual.

Automatic tuning is effective when station signals are strong and there is no interference.

If the signal from the station you want to select is weak, tune into it manually.

You can also use the automatic and manual preset tuning features to store up to 40 stations (A1 to ES: 8 preset station numbers in each of the 5 preset station groups).

Furthermore, you can recall any preset stations and exchange the assignment of two preset stations with each other.

Orient the connected FM and AM antennas lot the best reception.

Automatic tuning is effective when station signals are strong and there is no interference.

If the signal received from the station you want to select is weak, tune into it manually.

1 Rotate the @INPUT selector on the front

panel to select "TUNER" as the input source.

2 Press @FM/AM to select the reception band.

"FM" or "AM" appears in the front panel disphty.

Manually tuning into an FM station aut( maticall3 switches the tuner 1()l_lonaoralreception to increase the signal q[tality.

Rotate the @INPUT selector on the front

panel to select "TUNER" as the input source.

3

Press @TUNING AUTO/MAN'L so that the

AUTO indicator lights up in the front panel display.

Lights up

Press @FM/AM to select the reception band.

"FM" or "AM" appears in the front panel display.

Press @TUNING AMTO/MAN'L so that the

AUTO indicator disappears from the front panel display.

_..-= r"M :2:g:: ,2E ..,i....

.

No colon (:)

If a colon (:) appears in the front panel display, tuning is not possible.

the colon (:) off.

Press @PRESET/TUNING to turn

Press @PRESET/TUNING/CH <1 / C> once to begin automatic tuning.

When this unit is tuned into a station, the TUNED indicator lights up and the frequency of the received station is shown in the front panel display.

• Press @C> to tune into a higher frequency.

• Press @<1 to tune into a lower frequency.

:-= i"i_i"i'i r"M

NO colon (:)

:"::": :7.

i'di.,.i-:-

:7=:7===..-" _ H L=:..

Ifa colon (:) *_ppearsin the fl'( nt panel display, tunin_ is not possible. Press @PRESET/TUNING to turn the colon (:) off.

Press @PRESET/TUNING/CH <1 / E> to tune into the desired station manually.

"4:--

Hold down the button to continue sealvhing.

50 En

You can use the automatic preset tuning feature to store up to 40 FM stations with strong signals (A1 to E8:8 preset station numbers in each of the 5 preset station groups) in order.

You can then recall any preset station easily by selecting the preset station numbet_

1 Rotate the @INPUT selector on the front

panel to select "TUNER" as the input source.

2 Press @FM/AM to select "FM" as the reception band.

"i'M" appears in the front panel display.

3

Press and hold @MEMORY for more than 3 seconds.

The preset station number as well as the MEMORY and AUFO indicators flashes.

After approximately seconds, automatic presetting starts fi'om the current fi'equency and proceeds toward higher fi'equencies.

5

Flashes

¢% "_ = r"t.,._

¢"::": :': t.,,H _.....

• Any stored station data existing under a preset station number is cleared when yo[{ store a new station under the same preset station n[t]nber.

• If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after searching for all the available stations.

• Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune into it manually and store it as described in "Manual preset tuning" below.

YOUcan also store up to 40 stations (A1 to E8:8 preset station numbers in each of the 5 preset station groups) manually.

1 Tune into a station.

See page 50 for tuning instructions.

2

Press @MEMORY on the front panel.

The MEMORY indicator flashes in the front panel display for approximately 10 seconds.

,, [ /

.....

MEMORY .....

Flashes

Flashes

When automatic preset tuning is completed, the front panel display shows the fi'equency of the last preset station.

-#.

•

YOUcan specil}¢ the preset number fl'om which this unit stores

FM stations. Press @AIBICIDIE and then @PRESET/

TUNING/CR <1 / t:> repeatedly after you perliwm step 3 to select the preset station number under which the first station will be stored.

• You can begin tuning toward lower frequencies to store FM stations automatically.

Press @PRESET/TUNING so that the colon (:) disappears from the front panel display and then press

@ PRESET/TUNING/CH <1 after pressing and holding

@MEMORY li)r more than 3 seconds.

Press @A/BIClDIE repeatedly to select a preset station group (A to E) while the

MEMORY indicator is flashing.

The selected preset station group letter appears.

Check that the colon (:) appears in the fi'ont panel display.

Flashes

__

Preset station group

="=

]"i

=: r"M

==:'" ;"l

OC?

'" i'dL.i-._-

==::-= _ i_ i.=:..

= =

Colon (:)

51 En

I.%_ f/:fJ_E_rmur

Press (_)PRESET/TUNING/CH <1/t:> to

select a preset station number (1 to 8) while the MEMORY indicator is flashing.

• Press @C:> to select a higher preset station numher.

• Press @<1 to select a lower preset station number:

Flashes

Press (_)PRESET/TUNING/CH <1 / t:> on the

front panel (or (_)PRESET/CH A / V on the remote control) to select the desired preset station number (1 to 8).

The preset station group and numher appear in the front panel display along with the station band and frequency.

_::_ =:r-i" =

Preset station number t"!

"i = iZ'i':*i ,:::,::::, ,:'.

i':*iL.i,,.=-

Press @MEMORY while the MEMORY

indicator is flashing.

The station band and frequency appear in the front panel display with the preset station group and number you have selected. The MEMORY indicator disappears from the front panel display.

t"!

"i =, =':.*i ,:::,::::, ::::E :.*i.... .

The displayed station has been stored as A1.

YOUcan exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station "El" with '%5".

Select preset station "El" using @AIBIClDIE

and (_PRESET/TUNING/CH <1/_ on the front panel.

See "Selecting preset stations" on the left cohmm.

Press and hold (_)EDIT for more than 3 seconds.

"El" and the MEMORY indicator flash in the front panel display.

Flashes

• Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.

• The reception mode (stereo or monaural) is stored along with the station li-equency.

Flashes

YOUcan tune into any desired station simply by selecting the preset station group and number under which it was stored.

When perli_rmingthis operation with the remote control, set the operation mode selector to (_)$OURCE and then press TUNER to select "TUNER" as the input somve.

Press@A/B/C/DIE (or press@A-E/CAT. < / t>) to selectthe desiredpreset stationgroup(A to

E).

The preset station group letter appears in the front panel display and changes each time you press the button.

Select preset station "A5" using @AIBIClDIE and @PRESET/TUNING/CH <1 It>.

"A5" and the MEMORY indicator flash in the front panel display.

See "Selecting preset stations" on the left column.

Flashes

MEMOR_

Flashes

Press (g)EDIT again.

"EDIT E1 A5" appears in the front panel display and the assignments of the two preset stations are exchanged.

52 En

XM Satellite Radio offers an extraordinary variety of commercial-free passion for live sporting events, talk radio, up-to-the-minute more.

music, plus the best in sports, news, talk and entertainment.

XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan. XM's dedication to playing the richest selection of music is matched by its news, stand-up comedy, children's programming, and much

For U.S. customers, information about XM Satellite Radio is available online at www.xmradio.com.

For Canadian customers, information about XM Canada is online at www.xmradio.ca.

This unit is equipped with the Neural Surround decoder that plays back the XM HD surround sound content of tbe XM

Satellite Radio broadcasts in multi-channels, resulting in a full surround sound experience.

The XM Satellite Radio serxice is only axailable in the 48 contiguous United States (not axailable in Alaska and Hawaii and Canada.

• Information from XM Satellite Radio Inc.

Hardware and required monthly subscription sold separately. Other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only. All fees and programming subject to change. Subscriptions sut2ject to

Customer Agreement available at xmradio.com

(US residents) and xmradio.ca

(Canadian residents). Only available in the 48 contiguous United States and Canada. ©2006 XM Satellite Radio Inc. All rights reserved. All other trademarks are the property of their respective owners.

Connect the XM Mini-Tuner and the XM Dock (sold separately) to the XM ,jack on the rear panel of this unit.

For details, see the operating the XM Mini-Tuner Dock.

instructions provided with

XM Mini-Tuner and XM Dock

(sold separately)

• To ensure optimal reception of the XM Satellite Radio signals, the XM Mini-Tuner Dock must be placed at or near a southerly facing window with no obstacles in the path to the sky. You can mount it indoors or outdoors.

• Use the "XM ANTENNA" parameter in "OPTION MENU"

(see page 84) to display the XM Satellite Radio reception level in the OSD. For the best reception, orient the connected the XM

Mini-Tuner so that a value of 60% or more is displayed.

11"CHECK ANTENNA" appears in the lront panel display, the

XM Mini-Tuner Dock may not be connected to the

XIM jack oil the rear panel ol this unit properly.

;,5ili

53 En

Once you have installed the XM Mini-Tuner Dock, inserted the XM Mini-Tuner, connected the XM Dock to your XM Ready@ home audio system, and installed the antenna, you are ready to subscribe and begin receiving

XM programming.

There are three places to find your eight character XM Radio tD: on the XM Mini-Tuner, on the XM Mini-Tuner package, and on XM Channel 0.

Record the Radio ID in the following eight squares for reference.

[][][][][][][][]

The XM Radio ID does not use the letters 'T', "O", "S" or "F".

Activate yore" XM Satellite Radio service in the U.S. online at http:/lwww.xmradio.com/or call 1-800-XM-RADIO ( 1-800-967-

2346). You will need a ;ilajor credit card. XM will send a signal fi'om the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, Nit during peak busy periods yOLtmay need to keep yoLtrXM Ready home audio system on li)r up to an hour. When you can access the full channel lineup on your XM Ready home audio system you arc done. For more inli_rmation or to subscribe in Canada, visit XM on the Web at http:/Iwww.xmradio.ca/or call XM's Listener Care at 1-877-

GET-XMSR (1-877-438-9677).

Belore performing the lollowing operations, set the operation mode selector on the remote control to @SOURCE.

1

Rotate the @INPUT selector (or press

@XM) to select "XM" as the input source.

The cursor on the left of the XM indicator lights up in the front panel display and the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel appears in the front panel display.

Lights up

When you select "XM" as the input som'ce, this unit automatically recalls the previously selected channeh

The XM Satellite Radio signals cannot be output at the

AUDIO OUT / REC) jacks.

Search for a channel by using one of the XM

Satellite Radio search modes.

• To select a channel from the all channel list, see

"All Channel Search mode" on page 55.

• To select a channel by category, see "Category

Search mode" on page 55.

• To select a channel from the preset channels, see

"Preset Search mode" on page 55.

• To select the desired channel directly by entering the channel number, see "Direct number access mode" on page 55.

_.,#.

• You can use the Neural Surround decoder to enjoy the XM

HD surround sound content of the XM Satellite Radio broadcasts in multi-channels (see page 67).

• You can set the XM Satellite Radio preset channels {see page 56).

• You can display the XM Satellite Radio inlormation in the front panel display or in the OSD (see page 57).

54 En

Before perl'onning the following operations, set the operation mode selector on the remote control to (_)SOURCE.

• All Channel Search mode

1 Press (_)SEARCH MODE (or(_SRCH

MODE) repeatedly to select "ALL CH

SEARCH".

2

Press (_)PRESET/TUNING/CH <1/_ (or

_)PRESET/CH /_ / V) repeatedly to search for a channel within all channels.

• Youcan search lor a channel quickly by pressing and holding _PRESET/TUNING/CH <1 / C>(or

@PRESET/CH A / V).

• °lbdisplay the XM Radio ID number displayed in the front panel display, select channel "0".

• Category Search mode

1 Press (_)SEARCH MODE (or(_SRCH

MODE) repeatedly to select "CAT SEARCH".

2 Press @CATEGORY (or @A-E/CAT. <1 / _>) repeatedly to change the channel category.

3 Press _PRESET/TUNING/CH <1/_> (or

@PRESET/CH /_ / _) repeatedly to search for a channel within the selected channel category.

-#-

You can search R)ra channel quickly by pressing and holding (_PRESET/TUNING/CH <:a/ [2::> panel (or @PRESET/CH A / V on the remote control).

• Preset Search mode

Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see "Setting the XM Satellite Radio preset channels" on page 56.

_%,._

The initial lhctory setting of all preset channels (AI to ES) is

"{001] Preview".

1 Press _SEARCH MODE (or _SRCH

MODE) repeatedly to select "PRESET

SEARCH".

2 Press @CATEGORY (or @A-E/CAT.

<1 / _) repeatedly to change the preset channel group (A to E).

Press @PRESET/TUNING/CH <1 / L> (or

@PRESET/CH A / _) repeatedly to change the preset channel number (1 to 8).

-&

You can also select the plvset channel number directly by pressing the numeric buttons (1 to 8) ((g)).

Direct number access mode

1

Press (_SRCH MODE on the remote control

repeatedly to select "ALL CH SEARCH" or

"CAT SEARCH".

Press the numeric buttons (®) to enter the desired three-digit channel number.

For example, to enter the numher 123, press the numeric buttons ((_)) as shown below.

ENTERTAIN

CLASSICAL LIVFJCLUB %-%-%

The display changes as follows.

./ %=h'i "*. .....'i ":=

• "1_enter a one-digit or two-digit channel number, press the numeric buttons ((_))on the remote control and then press

(_)ENT to confirm the input number.

• Instead of pressing (_)ENT to tune into the channel immediately, you can wait a few seconds until this m_it conl_l'msthe entered channel number.

• Ifno button is pressed within a few seconds after you enter a one-digit or two-digit number, this unit automatically confirms the entered channel number.

• Pressing a button other than the numeric buuons ((g))or

(_ENT cancels the Direct Number Access mode procedure.

55 En

Belore perlorming the Iollowing operations, set the operation lnode selector on the remote control to (_SOURC F.

Press @CATEGORY (or @A-E/CAT.

<1 / _>) repeatedly to select a preset channel group

(A to E) while the MEMORY indicator is flashing.

The preset channel group letter appears in the front panel display.

Flashes

You can use this feature to store up to 40 XM Satellite

Radio channels (A1 to E8:8 preset channel numbers in each of the 5 preset channel groups).

You can then recall any preset channel easily by selecting the preset channel group and number as described in "Preset Search mode" on page 55.

Search for a channel you want to set as a preset channel by using one of the XM

Satellite Radio search modes.

See "Basic XM Satellite Radio operations" on page 54 for details.

Currently selected preset channel group

Press _PRESET/TUNING/CH

(or OPRESET/CH

<1 / E>

A / V) repeatedly to select a preset channel number (1 to 8) while the

MEMORY indicator is flashing.

The preset channel number appears in the front panel display.

Flashes

2

--4

:,, .,%

L U "r

,: -,=.

,,:

,...=.a

: : :, ,: : :

='"=z _=.J

Currently selected channel number

Press @MEMORY (or _XM MEMORY).

The MEMORY indicator flashes in the front panel display for approximately 10 seconds.

....

MEMORY

Flashes

You must proceed to and carry out steps 3 through 5 while the MEMORY indicator is flashing in the h'ont panel display.

......................

:!:7 =:.:=Hii

Currently selected preset channel number

Press @MEMORY (or _XM MEMORY) to set the selected XM Satellite Radio channel as a preset channel while the MEMORY

indicator is flashing.

A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns offin the front panel display.

m "': :: J L,'mg.L

., _ ::,:: i:i I I

Colon (:)

Note

Once you set a new preset channel, the one pre'dously stored in the same preset channel group and number is cleared.

56 En

Belore perlonning the lollo_ing operations, set the operation mode selector on the remote control to @SOURCE

You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display or in the OSD.

Note lI a status message or an error message appears in the Iront panel display or in the OSD, see the "XM Satellite Radio" section in

"Troubleshooting" on page 94 lor appropriate remedies.

•

Displaying the XM Satellite Radio information in the front panel display

Press @DISPLAY (or @DISPLAY) repeatedly to toggle between the following XM Satellite Radio information display modes.

• The fl:ont panel display carl indicate up to 14 alphanumeric characters at once. You can set whether to display the XM

Satellite Radio information in the IYont panel display in a continuoLIS manner or by 14 alphanulneric characters at once by using the "FL SCROLL" parameter in "OPTlON MENU" (see page 82).

• If the XM Satellite Radio inlormation contains a character that cannot be recognized by this unit, the character will be displayed with a space.

If you plvss @ DISPLAY (or @DISPLAY) while the XM

Satellite Radio inlormation display is scrolling from right to lell in the li-ont panel display, the XM Satellite Radio information display mode toggles as described above.

•

Displaying the XM Satellite Radio information in the OSD

Press @DISPLAY (or @DISPLAY).

The following screen is displayed in the OSD.

FiLl_ C:H SEGIRCH

',:J_l ; g43

C:HF/14 : XHU

CPT : Rock

NgltE : C:oidM a'-_

TITLE

+(

_5_:eed of sound

Co, I dM _Sl_e ?

El] [T] _C:HNIqHEL

[_1] '[>] : C:PTEGOR','

When the channel number / name is displayed: r" f::i..'i ":S "i =..,'M i i

L. =:,.="T *,,.= ,J ='"=_ _=,,J

When the channel category is displayed:

• To turn off the OSD, press @ DISPLAY (or @DISPLAY) again.

• You can select the amount of time the XM Satellite Radio inlbmmtion is displayed in the OSD by using the "OSD-

SOURCE" parameter in "OPTION MENU" (see page 82).

• To hold the XM Satellite Radio inlormation screen, press

@ENTER on the remote comrol while it is being displayed in the OSD.

• The XM Satellite Radio information screen on hold is released if you press @ENTER on the remote control again or if you change the XM Satellite Radio channeh

• This unit can save up to two XM Satellite Radio inlormation screens lot fitturc reference. To view the previous two XM

Satellite Radio information screens, press (_)TI'I'LE on the remote comrol repeatedly while the current XM Satellite Radio information screen is hold.

.:" i "i..,i i ":.6.' i i i "k'

When the artist name / song title is displayed:

Col. dF::.

... C ]. o

I

57 En

Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 23), you can enjoy playback of your iPod using the supplied remote control.

You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts (such as the MP3 format) stored on your iPod (see page 46).

Note_

• Only iPod ({"lick and Wheel), iPod nano, and iPod mini are supported.

• Some features may not be compatible depending on the model or the software version of your iPod.

• For a complete list of the remote control functions used to control your iPod, see the "iPod" colunm in "Controlling other components" on page 87.

• For a complete list of status messages that appear in the front panel display and in the OSD, see the "iPod" section in

"Troubleshooting" on page 99.

• Once the connection between your iPod and this unit is complete, "iPod connected" appears in the front panel display and the DOCK indicator lights up in the li'ont panel display.

• Only the analog audio and video signals of your iPod are input at the DOCK terminal, and the analog audio signals can be output at the analog AUDIO OUT (REC) jacks liar recording.

• Your iPod battery is automatically char,aed when your iPod is stationed in a Yamaha iPod universal dock connected to the DOCK terminal of this unit as long as this unit is turned on. You call also select whether this unit charges the battery of the stationed iPod or not when this unit is in the sutndby mode by selecting the "STANDBY CHARGE" parameter in "OPTION MENU" (see page 84). The

DOCK indicator turns on while this unit charges the battery of the connected iPod when this unit is in the standby mode.

You can control your iPod when "V-AUX" is selected as the input source.

The operations of your iPod can be done with the aid of the OSD of this unit (menu browse mode) or without it (simple remote mode).

•

Controlling iPod in the simple remote mode

You can perform the basic operations of your iPod (play, stop, skip, etc.) using the supplied remote control without the aid of the OSD of this unit.

•

Controlling iPod in the menu browse mode

You can perform the advanced operations of your iPod using the supplied remote control with the aid of the OSD of this unit.

You can browse the songs stored on your iPod in the OSD.

Further, you can change or adiust settings for your iPod to suit your personal preferences.

_.,#.

• The name of the song being played also appears in the fl'ont panel display according to the "FL SCROLL" parameter in

•

"OPTION MENU" (see page 82).

You call select the amount of time the iPod menu and play inlormation is displayed in the OSD by using the "OSD-

SOURCE" in "OPTlON MENU" (see page 82).

•

You call view the photos or video clips stored on your iPod.

• Operations can be also done with the controls on your iPod.

• Operations cannot be done with the controls on your iPod.

• The YAMAHA logo appears in the display window of your iPod.

• There are some characters that cannot be displayed in the front panel display or in the OSD of this unit. Those characters are replaced with underscores "".

• The "Settings" parameters can be changed or adjusted only in the OSD. Press @I=NTI=F:{on the remote control to toggle beta een the "Seuings" parameter settings.

• You cannot browse the photos or video clips stored on your iPod in the OSD. Use the simple remote mode to enjoy watching the photos or video clips stored on your iPod.

58 En

,_.-/llf,lli ".t;l";IIr

The function of the play information display Set the operation mode selector to

(g)SOURCE and then press @DISPLAY on the remote control.

The following display appears in the OSD.

iF'od

@tist:_

Sorig:_

Genres

[:ClI'_F 0:_>el" ::_

5ett in9:_

Tc,F

J

)

]

)

2 Press @A / V / <1 / _ to navigate the iPod

menu and then press (_ENTER to begin playback of the selected song.

Choices: Playlists (playlists), Artists (artists), Albums

(albums), Songs (songs), Genres (genres),

Composers (composers), Settings (settings)

• Playlists > Songs

• Artists > Albums > Songs

• Albums > Songs

• Songs

• Genres > Artists > Albums > Songs

• Composers > Albums > Songs

• Settings > Shuffle, Repeat

Shuffle :!!;lqi...ii::'i:"

Use this feature to set this rinit to play songs o1"alhririls ill random ordel:

Choices: Off. Songs, Albums

• Select "Off'"to deactivate this feature.

• Select "Songs" to set this unit to play songs in random ordel:

• Select "Albums" to set this unit to play albums in random order.

_.,#._

When "Shullle" is set to a setting other than "011";"2,'_" appears in the top right corner while songs or albonls are being shuffled.

Repeat {:?eF:.e

Use this feature to set this unit to repeat one song o1"a sequence of songs.

Choices: Off. One, All

• Select "Off'"to deactivate this feature.

• Select "One" to set this unit to repeat one song.

• Select "All" to set this unit to repeat a sequence of songs.

_.,#._

When "Repeat" is set to a setting other than "Off'; "@" or "_" appears in the top right corner while one song or a sequence of songs are being repeated.

Track number/total tracks

@

Name of the artist

@

Name of the album

@

Name of the song

@

Progress bar

@

Elapsed time

Shuffle and repeat icons

@

(playback), || (pausing), _ (search forward) and

'R (search backward)

®

Remaining tl rile

59 En

Recording adjustments and other operations are performed fl'om the recording components.

Refer to tbe operating instructions for those components.

Caution

The DTS signal is a digital bitstream.

Attempting to digitally record the DTS bitstream will result in noise being recorded.

Therefore, if you want to use this unit to record sources encoded in DTS, the following considerations and adjustments

DTS-compatible need to be made.

To play DTS-encoded player, follow its operating

DVDs instructions and CDs to make

(when a setting using a digital so that the analog audio connection) on your signal will be output from the playet_

• When this unit is set to the standby mode, you cannot record between other components connected to this unit.

• TONE CONTROL (see page 48) and VOLUME settings, the speaker level (see page 74) and the sound field programs (see page 42) do not affect recorded materiah

• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.

• The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC)jacks.

• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording.

Likewise, analog signals input at the AUDIO IN jacks are not output at the DIGITAL OUTPUT jack. Therefore, if your source component is connected to provide only digital or analog signals, you can only record digital or analog signals.

• A given input source is not output on the same OUT (REC) channeh

• S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing video signals inpm from a video source component that provides only an S-video or a composite video signal, you can only record an

S-video or a composite video signal on your VCR.

• The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.

• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

Do a test recording before you start an actual recording.

If you play, back a video source that uses scrambled or encoded signals to prevent it fl'om being dubbed, tbe picture itself may be disturbed due to those signals.

1

Turn on all the connected components.

2

Rotate the @ INPUT selector (or press one of the input selector buttons (@)) to select the source component you want to record from.

3 Start playback on the selected source component or select a broadcast station.

4

Start recording on the recording component.

60 En

You can enjoy good quality sound with the initial factory settings.

Although you do not have to change the initial factory settings, you can change some of the parameters to better suit the input source or your listening room.

4

Press @A / V to select the desired sound field parameter and then @<1 / c> to change

the selected sound field parameter value.

Cursor --

F'RCI LOGIC:

DSF' LELJEL_ ,,..

_d13

You cannot change the sound field parameter values when

"MEMORY GUARD" in "OPTION MENU" is set to "ON" (see page 83). If you want to change the sound field parameter vahles, set "MEMORY GUARD" to "OFF".

1 Turn on the video monitor connected to this unit.

2 Set the operation mode selector to @AMP and then press (_DISPLAY on the remote control.

The following status screen appears in the OSD.

5T#TLI5 UCIL:="-4_5%OdD

MCIUIE

5ci-Fi

II_F'LIT_

A, 5EL:=

DUD

HDI_i

I'/I GHT: OFF

• For details about the fimction and control range of each sound field parameter, see page 63.

• When you set a sound field parameter to a value other than the initial lactory settings, an asterisk mark (*) appears by the sound field parameter name in the OSD.

• The available sound field parameters for some of the somld field programs may be displayed on more than one page in the OSD. In this case, press @_ / V to scroll through pages.

• If you press and hold @<l / f> to change the somld field parameter value, the initial l]_ctory settings are shown momentarily in the front panel display.

• Use the "PARAM. INI" feature in "OPTION MENU" to

• initialize the parameters of each sound field program within a sound field program group (see page 83).

You call select the amo[lnt of time that the c[lrrent SIaILlS is displayed in the OSD by using the "OSD-AMP" parameter in "OPTlON MENU" (see page 82).

Press _)DISPLAY to turn off the sound field parameter display.

3

Press one of the sound field program selector buttons (®) repeatedly to select the

desired sound field program you want to adjust.

61 En

• Basic configuration of sound field programs

Each sound field progran_ has some parameters defining the characteristics of the program. 'I_)customize the selected sound field program, adjust "DSP LEVEL" and/ or "DIALG.LIFT" first, and then try other parameters.

Adjusting the vertical dialogue position

(DIALG.LIFT)

Use this feature to adjust the vertical position of the dialogues in movies. The ideal position of the dialogues is at the center of the video monitor screen.

"R)change sound field parameter settings, see page 61 fl)r details.

Adjusting the effect sound level of the sound field programs (DSP LEVEL)

Sound field programs add effect sounds (DSP effect sounds) to the original source sound to create sound field in the listening room.

Use the "DSP LEVEL" parameter to adjust the level of the effect sounds.

dialogue position.

If the dialogues are heard at the lower position of the video monitor screen, increase the value of "D1ALG.LIFT'.

The DSP effect sound level is low.

The DSP effect sound level is high.

Move up to the ideal dialogue position.

Choices: 0, 1,2, 3, 4, 5

"0" (initial setting) is the lowest position, and "'5" is the highest position.

At!just "DSP LEVEL" as follows:

Increase the value of "DSP LEVEL" when

• the effect sound of the selected sound field program is too weak.

• you cannot recognize any difference between the sound field programs.

Decrease the value of "DSP LEVEL" when

• the sound is vague.

• you feel that the additional sound effect is excessive.

Control range: 6 dB to 3 dB

• "DIALG.LIFT" is only available only "EXTRA SP ASSIGN" is set to "PRESENCE" (see page 72).

• You cannot move the dialogue position down from the initial dialogue position.

62 En

•

Sound field parameters for the advanced configurations

Use the following sound field paran_eters to customize sound field progran_s in detail.

"4<-

To change sound field parameter settings, see page 61 for derails.

;[i".i;[;" :,0,i...."?

i::':: ;[H;[i ::i;,i...V

'5,: ;[iq;[l ::[.:,i_","

Initial delay. Presence, surround, and surround back sound field initial delay. Changes the apparent distance from the source sound by adjusting the delay between the direct sound and the first reflection heard by the listener. The smaller the value, the closer the sound som'ce seems to the listener.

-",i:'-

When you adjust the initial delay parameters, we also recommend that you adjust the corresponding room size parameters likewise. This adjustment is especially el'liective for the

ClNEMA DSP programs.

ConFol range: 1 to 99 ms (INIT.DLY and RINIT.DLY)

1to 49 ms (S.lNlT.DLY

and SB lNl.DLY)

I

I

Delay

Time

Source sound

51 i

II i/ it reflections

Ti me

Delay

.J

Delay

Ti me l _ound source

9

Reflection l?_ce

Small value = I ms Large value = 99 ms

63 En

ID ,%_",M ,:::' T "7 i::

_:_ iii_ iiii_i_i i_i _iii_ _i_"_ i_:_

Room size. Presence, surround, and surround back room size. Adjusts the apparent size of the surround sound field. The larger the value, the larger the surround sound field becomes. As the sound is repeatedly reflected around a room, the lar_er tbe hall is, tile longer tbe time between tile original reflected sound and the subsequent refections.

By controlling the time bet,seen the ivflected sounds, you can change tile apparent size of the virtual venue. Changing this parameter fl-om one to two doubles the apparent length of the room.

-"4"-

When you adjust the room size parametcrs, we also recommend that you adjust the corresponding initial delay parameters likewise. This adjustment is especMly efliective lor the

ClNEMA DSP programs.

Comrol range: O.1 to 2.0

Source sound

__ __

Time reiIc_ctions __ i i

Time

Sound source

Ti me

,, \

[ Ti.jg' Hi:::":::;'::_

Small value = 0.I

Large value = 2.0

Liveness. Surround and surround back som_d field liveness. Adjusts the rcflectivity of the virtual walls in tile hall by changing the rate at which tbe early reflections decay. The early refections of a sound source decay much lhster in a room with acoustically absorbent wall surlhces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to its "dead", while a room with highly reflective surlhces is referred m as "live". This parameter lets you adj[lst the early reflection decat rate and thus the "liveness" of the room.

Control range: 0 to 10 il

S

Source sound cad

v,,

II

I We

Time Ti me Time

[ Small reflected

I sound

Small xalue = 0 Large value = I0

64 En

i::)C'i {

F.*L..'v*,

"F T h'ii::?

_ .LI li..

i i:::'i ii:::'i

....

Reverberation time. Adj {isis the amount of time taken for the dense, subsequent reverberation sound to decay by 60 dB at 1 kHz. This changes the apparent size of the acoustic environment over an extremely wide range. Set a longer reverberation time for "dead" sources and listening room enviromnents, and a shorter time lot "live" sources and listening room enviromnents.

Control range: 1.0 to 5I) s

Rexerbemtion

_i

Source sound

',_" Early reilections

S tnd s tree

REV.TIME

•

| Short

6;dB __d

iHlll

REV.TIME

\li

Rexerbemtion

REV.TIME

60 dB

<.

Small *,alue = 1.0 s Large*,atue = 5.0 s

Reverberation delay. Adjusts the time diflerence bet,seen the beginning ol the direct sound and the beginning ol the re',erberation sound. The larger the _alue, the later the re_ erberation sound begins, a later reverberation so{rod makes you leel as i| yo[t are in a larger aco{lstic em iromnent.

Control range: 0 to 250 ms

-_ I Source sound

k I

(dB)

60 dB

Time

REV.DELAY

REV.TIME

Reverberation lexel. Adjusts the volume ol the reverberation sound. The larger the value, the stronger the rexerberation becomes.

Control range: 0 to 10()9;

Source sound

2

(dB)

REV.LEVEL

!

Time

65 En

r'.,Ti:::,i:::T'."r' i...' ,H ',, L,**,... i

2-channel stereo direct. Bypasses the decoders and the DSP processors ol this unit lor pure hi-li stereo SoLlndwhen playing 2-channel analog SoLtrces.

Choices: AUTO, OFF g4"-

• Select "AUTO" to bypass the decoders, the DSP processors and the tone control circuitry only when "BASS" and "TREBLE" are set to 0 dB (see page 48).

• Select "OFF" not to bypass the decoders, the DSP processors and the tone control circuitry when "BASS" and "TREBLE" are set to 0 dB.

• When muhi-channel signals (Dolby Digital and DTS) arc input, they are downmixed to 2 channels and output from the li-ont lel_ and right speakers.

• The low-fl'cquency signals of the fl'ont left and right channels arc redirected to the subwoolizr in the following cases:

"LFE/BASS OUT" is set to "BOTH" (see page 72).

- "FRONT SP" is set to "SMALL" (see page 73) and "LFE/BASS OUT" is set to "SWFR"

(see page 72).

7-channel stere() center, surro[lnd lelt, surro[Hld right, surro[tnd back, presence lelt and presence right levels. Adjusts the _olume level ol each channel in the 7-channel stereo mode. The ax ailable parameters differ depending on the setting ol the speakers.

Control range: 0 to 100_/r

'::::1 i i:::'i..Wi

*:::'i'1::, i i:::'i ii:::'i

....q'..

*:::'t'1::, i i:::'i ii:::'i

....'_..: I...._....',*,'L,,_....

iDi i i:::'i ii:::'i i iDID

F..

i i:::'i ii:::'i i..I...'.,,'L.,A

'.." ,"._"i I" i", I"h:::d'_u"._:::,i'_= 2-channel and 7-channel Compressed Music Enhancer ellect le',el. The high-lrequency signals ol some sources may be emphasized too much. In this case, set the eflect le',el to "LOW".

Choices: HIGH, LOW

• Select "HIGH" lor a high ellect le'_el.

• Select "LOW" lor a h)w eflect lex el.

•

Selecting decoders used with sound field programs (Decoder Type)

Use this feature to select the desired decoder used with

MOV1E sound field programs (except "Mono Movie").

See page 45 for details about MOVIE sound field program.

Available decoders

•

Selecting decoders for 2-channel sources (surround decode mode)

Use this feature to play back sources with selected decoders. Youcan play back 2-channel sources on multichannels.

Dolby Pro Logic processing lor any so[lrces.

Dolby Pro Logic llx (or Dolby Pro

Logic 11) processing lot movie sources. The Pro Logic llx decoder

is not available when "SUR.B L/R

SP" is set to "NONE" (see page 73).

i"{eO ',',6 I":'i i.",_:::,r,';;::, DTS processing lot moxie sources.

Set the operation mode selector to (_)AMP and then press (_SUR.

DECODE repeatedly on the remote control to select the desired surround decoder.

You can select fi'om the folh)wing modes depending on the type of source you are playing and your personal preference.

_-'#-

You can change the decoder parameter settings. Press

_)DISPEAY and then @_ / V repeatedly on the remote control to select the desired decoder parameter. You can change the value of tile selected parameter by pressing @<1 / 1::>repeatedly on the remote controh

66 en

•

Decoder descriptions

Remote control button

I

Category of the program

I

Name of the program

!

PANORAMA DIMENSION CENTER WIDTH i

Available sound field parameters (see page 68)

I Dolby Pro Logic llx (or Dolby Pro Logic 11) processing lot lit[[sic sources. The Pro Logic llx decoder is not a*,ailabte v\hen SUR.B L/R SP" is set to 'NONE" (see page 731.

I I '1

Program description

..........

Dolby Pro Logic processing lor any sources.

Dolby Pro Logic llx (or Dolby Pro Logic 11)processing lor mo'de sources, The Pro Logic llx decoder is not a*,aitable v,hen

'St R.B L/R SP" is set to 'NONE" (see page 73).

i :!!;i...il:;i:i:;;:0i...ii...ii]:,

[ i:::'Li ][::':: Mi"i"'iKi" 1 ...............

..... - ....

i ..............................

Dolby Pro Logic llx tor Dolby Pro Logic I1)processing lor lnusic so[irces, The Pro Logic llx decoder is not avaitaMe when

'SL R.B L/R SP" is set to 'NONE" (see page 73).

PANORAMA DIMENSION CENTER WIDTH

_o..o_oo_(_ i:::,i!!K:Oi:::,i!![F'i....

-............................

------ .................

%

Dolby Pro Logic llx (or Dolby Pro Logic 11)processing lor game sources. The Pro Logic llx decoder is not a*.aitable ahen

'St R.B L/R SP" is set to 'NONE" (see page 73).

1 j-__

DTS processing lor moxie so[lrces.

....... J---1...........

DTS processing lor llll.tsicsources.

C. IMAGE i ,i i."<<:::_ ':::;i .ii"< ..

-_'_'_'_

Q_ (U.S.A.

and Canada models onb. l __

_

__

Neural Surround processing for any sources.

The Neural SLirround decoder is compatible with P(M signals (32 ktlz. 44.I kttz. 48 ktlz, 64 ktlz. 88.2 kllz and 96 ktlz/and analog

2-channel input sources. When Neural Surround-inccmlpatible signals are being input while the Neural Surround decoder is selected, multi- channel sources are decoded straight into the appropriate channels without any additional effect processing and the Neural Surroundincompatible PCM signals are played back in stereo. The Neumt Surround decoder is especially suitable 1or the XM HD Surround program ol

XM Satellite Radio.

When you select the surround decode mode lor Dolby Digital, DTS or DTS 96/24 sources, this unit automatically selects "SURROUND

DECODE Dolb_y Digital", "SURROUND DECODE DTS" or "SURROUND DECODE DTS 96124" program.

67 En

Decoder parameter descriptions r'., T i.,_i:PM C' T ,%M

D' .L i IL,A 'L...' ._. '.Jl 'i

_,,,,L,, H _ L,, P,, _,,,,,=,=,,="= i =

H,II?C,',', I:.::_ ["R.4:II_.].C.

i".

T hi i"ff::: I::P

t,,,, :: .{. 1 ir"p,,,ll

Pro Logic llx Music and Pro Logic 11Music panorama.

Sends stereo signals to the surround speakers as well as the lront speakers lor a wraparound eflect.

( hoices: OFF, ON

Pro Logic llx Music and Pro Logic 11Music dimension.

Adjusts the sound field either towards the lront or towards the rear.

(ontrol range: 3 (towards the re:tr) to +3 (towards the lront)

Initial setting: ST[) (standard)

Pro Logic llx Music and Pro Logic 11Music center width.

Moves the center channel output completely towards the center speaker or towards the lront telt and right speakers.

A larger value moves the center channel output towards the front left and right speakers.

Control range: 0 (center channel sound is output only Ii'om the center speaker) to

7 (center channel sound is output only lrom the lront leit and right speakers)

Initial setting: 3

DTS Neo:6 Music center image. Adjusts the Ii'ont leIi and right channel output relative to the center channel to make the center channel more or Iess dominant as necessary.

Control range: 0.0 to 1.0

Initial setting: 0.3

68 En

YOu can use the following parameters in "SET MENU" to ad,just a variety of system settings and customize the way this unit operates.

Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening envirt)ni)lent.

•

Auto setup

,"li 1"i%"1 ':::'i:::'"Fi 1{:::'

Use this feature to automatically adjust speaker and system parameters (see page 28).

•

Manual setup

i','il"li.Ji

{,"li ':::'i::_"H ii:::'

Use this feature to manually ad,just speaker and system parameters.

Sound menu ]. ,::.,.-,_

I II.,A ".%.,

Use this memt to manually adjust any speaker settings, alter the quality and ttme of the sound output by the system or compensate for video signal processing delays when using LCD mtmitors or prt_,jectors.

.."i..,._' i"*l i i:::'i {i:::'i

_.......L,ai:::' i:::'i{i::ri

Selects tile size of each speaker, tile speakers for low-frequency signal output, tile crossox er lrequency, and tile assignment of tile EXTRA SP terminal.

Adjusts tile output lexel ol each speaker.

Adjusts the distance ol each speaker.

Selects tile equalizer setting ol tile speakers.

Adjusts tile outpt_t lexel ol tile LFE channel for Dolb} Digital_ or DTS si_nals._

Adjusts tile dynamic range ol Dolby Digital or DTS signals.

Adjusts the muting Iex el, audio dela}, maximum x olume lexeI and initial xolume texel.

Selects tile component to pla? back IIDMI atldio signals._

Selects tile mode ol tile decoders Ior the 6. I/7. I-channel pla} back.

Input menu

.":, T i..ii::)i H" i','ii:::'i.Jii

Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.

7?

74

76

77

77

76

76

75

75

Assigns tile input/output jacks of this unit according to tile component to be used.

Changes tile name of the input source.

L,',"i:::' ,{.1

....

."""."*...' L.. 1"..I.T li'dt

Adjusts tile output _oJume of each input source.

.""I..='L..%"..2L"L,,I".i"*C't"'¢=ID'i:::'i::) the input mode lor tile sources connected to tile DIGITAL INPUT panel of this unit.

jacks on the rear

',, i.di ii "i=.I.T,...q11"=i'J numbers and ()tiler parameters o{ tile mtllti channel input.

80

80

78

79

80

69 En

Option menu ..:r,=li:::,"i"'[l",M

Use this menu to manually adjust the optional system parameters.

i'di::r i,...u'.,i i_"li:::,i'_

..."r.'.%.q....

,.J'%...q...A...A....

Adjusts the brightness ol the dispta_ and corn errs _ideo si_nats._

Locks sotlnd field program parameters and other _SET MENU" settings.

l...'r"".,...li::) .ITH T

Designates tile del_mlt audio input .jack select setting lk)r tile input sources when you turn on tile power ol this unit.

Initializes tile parameters ol a group oI sound field programs.

",'...q'd...

i:::,,"if","i',"la.

T_ Displays the current reception level oI the XM Satellite Radio signals.

Selects whether this unit charges tile battery ol tile connected iPod or not _\hen this unit is ill tile standby mode.

• Signal information ,:::.r,.:::H,...,,

Use this feature to check audio and video signal information (see page 40).

83

84

84

81

83

83

70 En

Use the remote control to access and adjust each paranleter.

• Youcan change the "SET MENU" parameters while this unit is reproducing sound.

• Press @RETURN to return to the previous menu level.

Set the operation mode selector to QAMP

and then press (_SET MENU to enter "SET

MENU".

The top "SET MENU" display appears in the OSD.

SET HEHLI

+ .IqLITO SETLIp

. HAIILIIqL SE'rVF '

" SI GIqI:IL IHI:O

[.,k] [',r] _LIF [/,:,_,_n

[ EI4TER ] _Er?{ ,-=,r

Press @A / V to select "MANUAL SETUP"

and then @ENTER to enter "MANUAL

SETUP".

The "MANUAL SETUP" display appears in the

OSD.

HIqHLIIZlL SETLIF'

+ 1 SOUND HEi'4U

2 IilF'LIT

30F'TIOH HEHLI

[.,k] /IV] _LIF,_Dc,_,_n m_'r_(Oil l [_-.(fl # li_ i >l,miilJ_ I1 "._

Press @A / V repeatedly and then press

@ENTER to select and enter the desired menu.

The following displays are examples where "SOUND

MENU" is selected.

HRNLIgL SETLIP i SOUHD HENLI

÷ I:I)SF'EAKERSET

C)SP D iSTPI4C:E b::, Eg!LII:,LI EER

E)LFE LEVEL

[ EHTER ] _ En'{ er i/2 i SOUN[ I HEHLI

+ F?[,','NI:/HiC: RgNGE

G )ALII:,I SET

H) HI,I% SET

I :,E,'>_TD SLIIR

[.,k]/IV] _U_=,_D,:",ur,

[ EI4TER ] _En'{ er

2/2

Press @A / V repeatedly and then press

@ENTER to select and enter the desired submenu.

The following display is an example where "LFE

LEVEL" is selected.

SOLIHD MENU

E)LFE LEVEL

÷ SI:'EIqI: ......

HEIqDF'HOHE....

_Z_dB gdl-'

[,&] ' ['t_'] _Up 'Dol,_lq

[4]' [>] _IqdJ u:_ _.

Press @A / V to select the desired parameter

and then @<3 / [;> to change the parameter settings.

Press (_SET MENU to exit from "SET

MENU".

71 En

I

Ee_/_.l.l_utomcEl_,unEIJTJfzfLVllYzYl_lll_

Use this feature to manually adjust speaker settings or compensate for video signal processing delays when using

LCD monitors or projectors. Most of the SOUND MENU parameters are set automatically when you run AUTO

SETUP (see page 28).

MglHUAL SETUP i SOUHD MEHU i/2

B)SPEJqKERLEHEL

C)SF'biSTPMCE iZ ER

EUEL

[.,_,]'[',r] ;UF q:_c,_,!r_

,-=,r

H#IfiLIgL SETUP i SCIUNI:I HEHLI

÷ F?D','NgHiC RgHGE

G)ALIDIO SET

2/2

C,_,]/IT] _ UFiDc,,,_r,

[ EI4TER ] _Enter

• Speaker settings

Use this feature to manually adjust any speaker settings.

SOUHB I'ENU

÷ EXTRI:I PSSiGH

FFIOMTE:

F'RESEIE:EIfiOIE

FROMT E'.....

FRONT

F'RI 0R IT','. ........

Z01fiE2 SET

Not gua, i ] ._l:,i,P

Extra speakers assignment E:::==TRI::i

Selects the function of the speakers connected to the

EXTRA SP terminals.

Choices: FRONT B, PP,ESENCE, NONE

When you use the alternative front speaker

system (see page 38)

Select "FRONT B".

When you use the presence speakers

(see page 12)

Select "PRESENCE" to set the function of the speakers to the presence speakers.

When you do not use the EXTRA SP terminals

Select "NONE" to deactivate the EXTP, ASP terminals.

FRONT B speakers setting

The "FP,ONT B" parameter is available only when you set

"EXTRA SP ASSIGN" to "FRONT B".

Use this feature to select the locatkm of the FRONT B speakers.

Choices: FRONT, ZONE B

• Select "FRONT" to turn FRONT A and B on or off when the FRONT B speakers are set in the main room.

• Select "ZONE B" if the FRONT B speakers are set in another room. if FRONT A is turned off and FRONT B is turned on, all the speakers including the subwoofer in the main room are muted and this unit outputs sound at the FRONT B terminals only.

Noto

• Hyou connect headphones to the PHONES jack ol this uniL the sound is output lrom both the headphones and the speakers connected to the EXTRA SP terminals when "FRONT B" is set to "ZONE B".

• 11a DSP program is selected ,ahen "FRONT B" is set to

"ZONE B", this unit autnlnatically enters the Virtual CINEMA

DSP mode (see page 46).

Presence/Surround back channel priority i:::_i:::,T ,"_ i.

The "PRIORITY" parameter is available only when you set "EXTRA SP ASSIGN" to "PRESENCE".

Use this feature to prioritize either the presence or the surround back speakers when playing sources that contain surround back channel signals using the CINEMA DSP sound field programs.

Choices: PRNS, SUR. B

• Select"PRNS" to use the presence speakers even when surround back channel signals are input. The signals for the surround back channels will be output fi'om the surround speakers.

• Select "SUR. B" to use the surround back speakers when surround back channel signals are detected in a

CINEMA DSP program. The presence channel signals are output from the fi'ont speakers.

• This parameter shares the value with the "EXTRA SP

ASSIGN" parameter in "AUTO SETUP".

• If you select "ON" in "BI-AMP" (see page 93), you cannot select "PRESENCE" in "EXTRA SP ASSIGN".

• Alter changing the "EXTRA SP ASSIGN" setting, carry out

"AUTO SETUP" again (see page 28).

72 En

_ {o/i l f_--ffl p lia_-_ ,miilJ_ I-_l_VlII-qlL'till I1 ".i

Woofer section of a speaker is 16 cm (6.5 in) or larger: large

Woofer section of a speaker is smaller than 16 cm (6.5 in): small

Front speakers

Choices: SMALL, LARGE

....q':TD

SCILIIID l,lElqLI

I,

FRCII/T SF I

Surround left/right speakers ,:::_iiD i ...i=,,:TD

Choices: NONE, SML, LRG

5L-!Ui& HEIIU

'=-UR,, L'R 'EF'

When the front speakers are large

Select "LARGE" (large).

When the front speakers are small

Select "SMALL" (small).

When "LFE/BASS OUT" is set to "FRNT" (see page 72), you can select only "LARGE" in "FRONT SP'. II the value ol

"FRONT SP" is set to a setting other than "LARGE" in ad',ance, this unit automatically changes the value io "LARGE".

Center speaker ,-._:::_-_:::_:::,

Choices: NONE, SML, LP,G

SIZILII_[!I'IEHLI

C:EI/TER :SF'

HOHE ::,51'1L LRG

When the surround speakers are large

Select "LRG" (large).

When the surround speakers are small

Select "SML" (small).

When you do not use the surround speakers

Select "NONE" (none). This unit is set to the Virtual

CINEMA DSP mode (see page 46), and "S UR.B L/R

SP" is automatically set to "NONE".

Surround back left/right speakers

Ci i i:::, i:::, i ,,'i:::, Ci:::,

Choices: NONE, SMLxl, SMLx2, LRGxl, LRGx2

L=CILII/[)I'IEIqLI

SLIR. El :_"F'

HOHE ::4HL LRI3

When the center speaker is large

Select "LRG" (large).

When the center speaker is small

Select "SML" (small).

When you do not use the center speaker

Select "NONE" (none). The center channel signals are directed to the front left and right speakers.

5HL::<I >5_'1L::<2 LRI3::<]

When the surround back left and right speakers are large

Select "LRGx2" (large x 2).

When the single surround back speaker is large

Select "LRGxl" (large x 1).

When the surround back left and right speakers are small

Select "SMLx2" (small x 2).

When the single surround back speaker is small

Select "SMLxl" (small x l).

When you do not use the surround back speakers

Select "NONE" (none). The surround back channel signals are directed to the surround left and right speakers.

73 En

LFE/Bass out i....i:::i!![."i!!!:l:i:!!;S

Use this feature to select tile speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

Choices: SWFR, FRNT, BOTH

LFE 'E:RSS OUT

Subwoofer phase Si.ji!!!:[,.iOOF:i!!!i;?.

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

SOLII4D HEI4LI

SLIEIWOCIFERF'HIqSE

When a subwoofer is connected to this unit and you want to get natural bass sound

Select "SWFP," (subwoofer).

The LFE signals as well as the low-frequency signals of other speakers set to

"SML" (or "SMALL") are directed to the subwoofer.

When a subwoofer is connected to this unit and you want to get rich bass sound

Select "BOTH" (hoth). The low-frequency signals of any source are output from the subwoofet: The LFE signals as well as the low-frequency signals of other speakers set to "SML" (or "SMALL") are directed to the subwoofer. The low-frequency signals of the front left and right channels are directed to the front left and right speakers and the subwoofer regardless of the

"FRONT SP" setting.

When you do not use a subwoofer

Select "FRNT" (front). The LFE signals, the low-frequency signals of the front left and right channels, and the low-frequency signals of other speakers set to "SML" (or "SMALL") are all directed to the front left and right speakers regardless of the

"FRONT SP" setting.

Bass crossover (:::F?.0:!!!;S(?i.,ii!!:F?.

Use this feature to select the crossover frequency of all the speakers set to "SML" (or "SMALL") or to "NONE" in

"SPEAKER SET" (see page 73). All frequencies below the selected frequency will he sent to the subwoofer or to the speakers set to "LRG" (or "LARGE") in "SPEAKER

SET" (see page 73).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

• Select "NORMAL" if you do not want to reverse the phase of your subwoofel:

• Select "REVERSE" to reverse the phase of your subwoofer.

• Speaker level EK:,:!!!;F:'EI:iKER

Use this feature to manually adjust the output level of each speaker.

Control range: 10.0

to 10.0 dB

Control step: 0.5 dB

Initial setting: 0.0 dB liXri_ li::['_:::'l,,,

,...='-"

'.!iY.

....'::1_::',...

,i2)i_

""_"_...

I::ront leit speaker

I::ront ri_ht_ speaker

(enter speaker

Subwoofer

Surroundleft speaker

Surroundright speaker

Surroundback right speaker

Surround back left speaker

I resence lelt speaker

I resence right speaker

FRE_D. _ _:_OH2:

• The available speaker channels diflier depending on the setting of the speakers.

• Instead of"SBL" and "SBR", "SB" is displayed if"SUR.B

L/R

SP" is set Io either "SMLx 1" or "LRGx 1" (see page 73).

74 En

• Speaker distance C::,SP [::,iSh::ibiCE

Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel.

Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound fi'om each speaker so that all sounds will arrive at the listening position at the same time.

SOLIIID HEIqLI

C:?SF' Di STI:]IIC:E

÷ LINi "[........

FROHT L...

feet

10. Efft

FROHT F>..

10.6_:L

CEHTER ....

SIdFR ......

IEL EIft

II2,. Oft

L,k] ['_]::Lh: _Dovn

[_I] '[>] H:ldJ u:_=

_/2

Unit

Choices: meters (m), feet (ft)

Initial setting:

[U.S.A.

and Canada models[: feet fit)

[Other models]: meters (m)

• Select "meters" to adjust speaker distances in meters.

• Select "feet" to adjust speaker distances in feet.

Speaker distances

Control range: 0.30 to 24.00

m (l.0

to 80.0 ft)

Control step: 0.10 m (0.5 ft)

Initial setting:

FRONT L/[:RONT R/CENTER/SWFR/S UR. L/S UR. R/

PRNS L/PRNS R: 3.00 m (10.0

ft)

SB L/SB R: 2.10 m (7.0 ft)

REi".i"i"EF;;:

,::MH:::, _

,:::'_H:::, _:::,

I::rontleft speaker

I::ront right speaker

Center speaker

Su bwooler

Surround Ieh speaker

Surround right speaker

Surround back left speaker

Surround back right speaker

I resence left speaker

I resence right speaker

PiT_Jqlll_.lil[,Ji_l_,miilJ_r-_Idlll-ql_'t:llllt_

• Equalizer iI::,>i!![QU{::iLiZER

Use this feature to select the parametric equalizer or the graphic equalizer:

Equalizer type select E(;! P,"F'E SELECT

Use this feature to select the type of equalizer.

Choices: AUTO PEQ, CENTER GEQ, EQ OFF

SOLIHD HEHLI

D> EQUiqL IZER

+

EFJ TVF'E SELEL-:T

C:EHTER GEQ

L,k] '["_ ] ::CT GEQ

[4] 'r>]_Select

• Select "AUTO PEQ" to use the paramenic equalizer adjusted in "AUTO SETUP" (see page 28).

• Select "CENTER GEQ" to adjust the built-in 5frequency band graphic equalizer so that the tonal quality of the center speaker matches that of the front left and right speakers. Press (_)A / V to display the graphic equalizer screen.

• Select "EQ OFF" to deactivate the equalizing feature.

When you carry out "AUTO SETUP" in advance (see page 28),

"AUTO PEQ" is automatically

Test tone "i"i:::' selected as the delault setting.

SOLIHD HEHLI

÷ TEST ?OFF

01'4

10EIHz ...IF

" "

3EII_,H Z " " 41" " "

IkHz ...11. " "

3kHz ..

"IF " " iE# Hz: ..

"[1"" "

[._,] [',r] _ LIF 'Do_,!r_

[-_]' [>] _F,dJu:_ t

E_dl?

Eldl:-_

E_dE

E_dE

6dl?

Use this feature to make adjustments for "CENTER GEQ" while listening to a test tone.

Choices: OFF, ON

• Select "OFF" to stop test tones and output the currently selected source component.

• Select "ON" to output test tones from the center and front left speakers.

• The available speaker channels differ depending on the setting of the speakers.

•lnstead of "SB L" and "SB R", "SB" is displayed if "SUR.B L/

R SP" is set to either "SMLx 1" or "LRGx 1" (see page 73).

75 En

I

Center graphic equalizer CEi.4FE]:;I:GE);!

Use to match the tonal quality of the center speaker with that of the front left and right speakers. You can adjust 5 frequency bands (100 Hz, 300 Hz, 1 kHz, 3 kHz and

10 kHz).

Control range: 6.0

to 6.0 dB

Control step: 0.5 dB

Initial setting: 0.0 dB

SOUHD IfiEMU

TEST ?OFF

+ i00IHz , "41"""

3_XqHz .. 4!"

CIM

3_IHz ,.

HI...

10kHz .... , _ _

[At [_"] II ]F [h:n.Jl'l

[ 4]/[>] Hqddu:_t

E!dB

EIdE

EIdE,

'

Press @A / V to select a lrequency band and (_) <:::] the selected lrequency band.

•

• Dynamic

Use this feature to select the amount of"dynamic range compression to be applied to your speakers or headphones.

This setting is effective only when this unit is decoding Dolby Digital and DTS signals.

Choices: MIN, STD, MAX

• Select "MIN" (minimum) if you regularly listen at low volume levels.

Select"STD" range Fr)I)Yi"iAMI(? i;?J::il".iEii!!:

(standard) for general use.

• Select "MAX" (maximum) to preserve the greatest amount of dynamic range.

SOUHD IIENU

F )DYHI:IIgIC RAHGE

÷ SP_ HIH ST[,?I'II_',:_

HI:': Hilfi ST[,::IgI:I',:;

[,,k] ['4r] ::UF '[!o_,_n

[4] '[>]_Seiec k

The "CENTER GEQ" parameter can be adjusted only when

"CENTER GEQ" is selected in "EQ TYPE SELECT".

• Low-frequency effect level

Use this feature to adjust the output level of the LIVE (lowfrequency effect) channel according to the capacity of your subwoofer or headphones.

The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

Conm)l range: 20 to 0 dB

Control step: 1 dB

Speaker ....ci:::,,,

Adjusts the speaker compression.

Headphone ......

Adjusts the l]eadpl]one compression.

• Audio settings

Use this feature to adjust the overall audio settings of this unit.

SOUND HEHU

G ?AU[!iCI SET

÷ HLITil,]GT','F'E.FLILL

I% DELIW.

.....

Am:_

I.IgX

UOI_....q

E,. 5dl?

[,,_.] /[',r]

[_1],'[_ ] _Set ,>:"5

SOUIID HEI4U

E ::'LFE LEHEL

÷ SPEAKER ......

HEADF'HOIIE ....

E!dl?

{1dE:

[A] [ _"] iliJF [:'OI.Jl'=

[ 4 ] [ > ] _A di u:_ _.

Speaker :!!;

Adjusts the speaker LFE level.

Headphone

Adjusts the headphone LFE level.

Depending on the settings ol "LFE/BASS OUT" (see page 72), some signals may not be output at the SUBWOOFER OUTPUT jack.

Muting type Hi..j]i!!

Use this feature to adjust how much the mute function reduces the output volume (see page 40).

Choices: FULL, 20dB

• Select "FULL" to completely mute all the audio output.

• Select "_OdB" to reduce the current volume by 20 dB.

Audio delay I:::I,,

Use this feature to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Control range: 0 to 160 ms

Control step: 1 ms

76 En

Maximum volume h'i,='l=Q

Use this feature to set the nmximunl volume level of this unit. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is 16.5 dB to 80.0

dB. However, when "MAX VOL." is set to 5.0

dB, the volume range becomes

5.0dB

to 80.0

dB.

Control range: 16,5 dB, 15.0 dB to 30.0

dB

Conux)l step: 5.0 dB

Pl'r_(qllf_.[ii#li_l_.l,miilJ_r-_f_Vlll-_fll-'t:llll'._

• Extended surround decoders i ::,E::.:3[:,!!!;LiF?.,,

Use this feature to enjoy 6. 117.l -channel playback for multi-channel sources using the Dolby Pro Logic tlx,

Dolby Digital EX or DTS-ES decoders by using the connected surround back speakers.

EOLIHD MENU

I ?EXTD

5UR,

MODE........

RUTO

• When this unit is in the auto setup procedure, the volume level is automatically set to 0 dB regardless of the current "MAX

VOL." setting.

• The "MAX VOL." setting takes priority over the initial volume selling. For example, if "INI.VOL." is set to -20.0 dB and

"MAX VOL." is set to -30.0

dB, the volume level is automatically set to _0.0

dB when you turn on the power of this unit next time.

Initial volume ]]".ii.UOi ......

Use this feature to set the volume level of this unit when the power of this unit is turned on.

Choices: Off, 80.0

dB to 16.5 dB

Control step: 0.5 dB

The "MAX VOL." setting takes priority oxer the "INI.V()L." setting.

• HDMI setting u.ir,h.

Use this feature to select the component to play back

HDMI audio signals.

Support audio

50UHD MEHU

H)HDHI SET

SLIpF'CIRT I:ILIDi 0 s

HTR-6080

[43 _[>3 _L:eiect

[ ENTER ] _ Return

:!!!;i..jF::'POF?.T

Use this feature to select whetherto play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUTjack on the rear panel of this unit.

Choices: HTR-6080, OTHER

• Select "HTR-6080" to play back HDMI audio signals on this unit. The HDMI audio signals input at the

HDMI IN ,jacks of this unit are not output to the HDMI component connected to the HDMI OUT,jack on the rear panel of this unit.

• Select "()THER" to play back HDMI audio signals on another HDMI component connected to the HDMI

OUT jack.

Mode i"iO[::'F:

Use this feature to select the mode of"the decoder driving.

Choices: AUTO, ON, OFF

• Select "AUTO" to activate the optimum decoder to play back the signal in 6.1/7.1 channels when a signal flag that can be recognized by this unit is input.

• Select "ON" to play hack multi-channel sources using the selected decoder type in "TYPE".

• Select "'OFF" not to use the decoders to create 6.1/7.1

channels.

Decoder type

"r'i.ji:::,i:::'l ....

SOUND I'IEIfiU

I )EXTD SI.IR.

÷ MODE..........

T','F'E,..

F'L E:d'lo,_ie

014

[.,k] [v]llLb Doun

Use this feature to select the decoders used to play back multi-channel sources when you select "ON" in "MODE".

Choices: PLIIxMovie, PLItxMusic, EX/ES, EX

• Select "PLtlxMovie" to play back Dolby Digital or

DTS signals in 7.1 channels using the Pro Logic ltx movie decoder.

• Select "PLItx Music" to play back Dolby Digital or

DTS signals in 6.117.1 channels using the Pro Logic llx music decode!'.

• Select "EX/ES" to play back Dolby Digital or DTS signals in 6.1/7.1 channels using the Dolby Digital EX or DTS-ES decoder.

• Select "EX" to play back Dolby Digital or DTS signals in 6.1/7.1 channels using the Dolby Digital EX decoder.

The HDMI video signals input at the HDMI IN 1 or HDMI IN 2jack ol this unit are ah_ays output at the HDMI OUT jack of this unit.

77 En

Use this feature to activate the desired decoder manually when this unit cannot detect the signal flag encoded to the input sources correctly.

• The available decoders vary depending on the setting of the speakers and the input sources.

• 6.1/7. l-channel playback is not possible in the following cases: when "SUR. L/R SP" (see page 73) or "SUR.B L/R SP" (see page 73) is set m "NONE".

when the component connected to the MULTI CH INPUT jacks is being played.

- when the source being played does not contain surround leli and right channel signals.

- when a Dolby Digital KARAOKE source is being played.

-when this unit is in the stereo playback, Compressed Music

Enhancer (see page 46) or Pure Direct {see page 48) mode.

-when "BI-AMP" is set to "ON" (see page 93).

• When this unit is turned off, this setting will be reset to

"AU TO".

Use this menu to reassign the input!output ,jacks, select the input mode or rename the input source.

HAHLIgL SETUP

2 ilqF'LIT

+ I:I;,i/0

B;,IHPUT REi IPI'iE

C:>UCIL TR ll'i

E>VIULTI C:H SET

[.,_,] /['<_'] ![Ic,_.!n

[ EIqTER ] _Ere: e_'

•

Input/output assignment

17a':, I::'a':::?:::;TI::IHNi:::'HT

Use this feature to assign the input!output

jacks according to the component to be used it-"the initial settings of this unit do not correspond to your needs.

Change the following parameters to reassign the respective ,jacks and effectively connect more components.

Once the input/output,jacks the corresponding component are reassigned, by using you can select the INPUT selector on the fl'ont panel (or the input selector buttons on the remote conm)l).

_.,&

The input source name in parentheses indicates the delault assigned input source.

For COMPONENT VIDEO jacks A, B and C

Choices: [A] DVD, DTV/CBL, V-AUX, DVR, VCR

[B] DVD, DTV/CBL, V-AUX, DVR, VCR

[C] DVD, DTV/CBL, V-AUX, DVR, VCR

IH:'LITNEIqU

C HFIi'IT T

÷ [_q] .....

[ B ] .....

[C] .....

DUD

< DHC,

[,TU 'C:ISL

<DTUiC:BL )

[!UR

< DUR )

>

78 En

For OPTICAL OUTPUT jack 1

Choices: (1) PHONO, CD, MD/CD-R, DVD, DTV/CBL,

V-AUX, VCR, DVR

I HF'LIT HEHLI

OPT I C:JZlLOUT

•_ (I) .....

1'1[!'C:[/-R

<HD 'CD-R )

Pl'r_(Olllf_.fflpli_l_,l,liilJ_r:Idlll:ll_'t:lllJ_

For HDMI IN jacks 1 and 2 , ,,....,

Choices: [IN 1] DVD, DTV/CBL, V-AUX, DVR, VCR

[tN2] DVD, DTV/CBL, V-AUX, DVR, VCR

IHF'UT MEHLI

HDI'II IH

:" [IH1]...

[ 114;2]...

DUD

( DV[,

DTU, L-:I3L

(r!TU 'C:BL )

)

Not

When you connect a component to both the DIGITAL INPUT

(COAXIAL) and DIGITAL INPUT (OPTICAL)jacks, priority is gixen to the signals input at the DIGITAL INPUT {COAXIAL) jack.

For OPTICAL INPUT jacks 2, 3 and 4 f=ii::)<T' T f==f"ii TM

Choices: (2) PHONO, CD, MD/CD-R, DVD, DTV/CBL,

DVR, VCR

(3) PHONO, CD, MD/CD-R, DVD, DTV/CBL,

DVR, VCR

(4) PHONO, CD, MD/CD-R, DVD, DTV/CBL

DVR, VCR

I IqF'LIT V]EHO

0PT it:g/

÷ (2) .....

<3) .....

(4) .....

IH

I'115'C:D-R

<H[, 'C[,-R ?

DUD

[IOb

DTU/CEIL

(DTU '[:BL )

:J

You cannot select a specific item more than once h)r the same type ol jack.

• Input rename _:::,.., i:)ii:'M,'H'di::'

Use this feature to change the name of the input source that appears in the OSD and in the front panel display.

I HF'UT MEHLI

El::,ild_UT REIqI:II'IE

DUD -: H',' [:,UI::,

[ <] '[_ ]_ F'omit ic,n

[,k] I'm'] _L-ha5 a_,,

• This feature is useful when you change the input or output assignment for digitaljacks and component video inputjacks.

• Youcan only rename DOCK when iPod is stationed in the

Yamaha Universal Dock connected to this unit.

1 Press one of the input selector buttons (@) on the remote control to select the input source you want to change the name of.

For COAXIAL INPUT jacks 5 and 6 i l:::l :[ i".i

Choices: (5) PHONO, CO, MD/CD-R, DVD, DTV/CBL,

V-AUX, DVR, VCR

(6) PHONO, CD, MD/CD-R, DVD, DTV/CBL,

V-AUX, DVR, VCR

2 Press @<1/_> to place the "_" (underscore) under the space or the character you want to edit.

I HF'LIT HEHLI

[:0gXl PL IH

+ ,: 5, .....

<,£,:, .....

<

C[:,

[:[:,

DUI:,

< DUD

:,

:,

Press @A / _7 to select the character you

want to use and then press @<1 / _> to move to the next space.

• You can use up to 8 characters lot each input.

• Press @V to change the character in the h)llovdng order, or press @_ to go in the reverse order:

A to Z, 0 to

9, a to Z, symbols (#, *, , +, etc.), space.

4

Repeat steps 1 through 3 to rename each input source.

on the remote control to exit from '<INPUT RENAME".

I

79 En

• Volume Trim C:)UOL.U{'qE"r{;?.

Use this feature to adjust the output level of"each input source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.

Choices: XM, TUNER, PHONO, CD, MD/CD-R, DVD,

DTV/CBL, VCR, DVR, V-AUX, DOCK,

MUUI'I CH

Control range: 6.0

to 6.0 dB

Control step: 0.5 dB initial setting: 0.0 dB

I HPLIY HEHU

C ) U OL LINE f,q: 1I'I

M',' DUb

DUD -} {I _I#1d1£

[ 43 '[>]aAdJusl

[ RETLIRH ] ::Ex i {

• Youcan adjust the value {or DOCK only when iPod is stationed to the Yamaha Universal Dock connected to this unit.

• The defauh name ("DVD" in the display example ahove) and the new name ("MY DVD") of the selected input source appears in the OSD.

• Decoder mode F',",i",ZII'F"f=H",_:::'iII:'

INPUT HEHLI

[I)DECODL--R NODE

÷ ::AUTO LAST

CD ....

HI) _CI)-R ....

DUD

AUTO

AUTO

....

ALIT0

[.,k] ["r] _ UF q)cit,Jn

[4] '[>]_Select

1/2

Decoder select mode

Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

• Select "AUTO" to if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode.

• Select "LAST" to if'you want this unit to automatically select the last decoder mode used for the connected input source.

DTS decoder prioritize setting

Choices: AUTO, DTS

• Select "AUTO" if you want this unit to automatically detect input signal types and select the appropriate input mode.

• Select "DTS" if you want this unit to select DTS as the input mode.

• Multi channel input settings

i:7 ", h'ii ii T T {"'L.i

L...'_p..q.._l

.I.

,...._i

,::Ti:::'T

...q...._

Use this feature to set the function of the multi cbannel input.

I H:ILIT MEHLI

E)IflLILTI CH SET

+ BGU .....

LAST

I HFILIT CH .....

6C:H

[.,k] [v]_UF

['Jq [>]:ISelect q)civn

BGV BEiU

Use this feature to select the video source played in the background of the sources input from the MUUFI CH

INPUT ,jacks.

Choices: DVD, DTV/CBL, V-AUX, DVR, VCR, LAST,

OFF

• Select "LAST" to set this unit to automatically select the last selected video source as the background video source.

• Select "OFF" to set this unit not to play the video source in the background.

Input channels ]]..iF'LrTCH

Use this setting to select the number of channels input from an external decoden

Choices: 6CH, 8CH

• Select "6CH" if you input 6-channel signals.

• Select "8CH" if you input 8-channel signals.

Front input F:i:;?,Oi"4"F

I HF'LIT HEIqLI

DHLILTI CH SET

+ BGU .....

LAST

I IqFILIT C:H .....

8CH

F,q:OIqT...

DUD

[.,_.] ['_"]_UF Dci_aq

['4] '[_ ] M_,pieci

If you selected "SCH" in "INPUT CH", you can select the analog jacks at which the front signals from an external decoder will be input.

Choices: CD, MD/CD-R, DVD, DTV/CBL, V-AUX,

DVR, VCR

_%,._

See page 22 lot the connec6on infonna6on.

The "FRONT" parameter appears only when you set "INPUT

CH" to "SCH".

80 En

Use this menu to adjust the optional system parameters.

•

MAHLIPL SETUP

30PTiOH HEHLI

÷ I:I)[,ISI:'LI:I'?

SET

B)IdEI'IORY GLIARD

C)I:IUDI O EELECT

D;, F'ARAId.

Iili

[A] [T] ::UF E!c,_,_p

[ EIITER ] :IEntel

I/2

Display settings

MRI,ILI#L SETUP

3 OF'TIOil MEHU

_ F::,',<H RI:I[!ICI

SET

G)DOC:K SET

2/2

[i] '[ T] _UF q)ok_n

[ EHTER ] _Ente_

A>E:']::!!!;Fq....AY

_(.tlif_.II|l,._l_._#untrli_l-'Idl#l-'Tl_.'_l_l#J'.J

H DMI Up-scaling

Use this feature to select the resolution of the HDMI upconversion of the analog video signals input at the

VIDEO, S VIDEO and COMPONENT VIDEO jacks so that the up-scaled video signals are output at the HDMI

OUT jack.

This unit up-scales the analog video signals as follows:

• 480i (NTSC)/576i (PAL) _'. 480p/576p,

• 480p/576p _'. 1080i or 720p

1080i or 720p

Press @<:I / C>to select the desired resolution

and then @ENTER to confirm the selection.

Choices: THRGH, 480p (or 576p), 1080i, 720p

• Select "THRGH" (through) not to up-scale any analog video signals.

• Select "480p" (or "576p"), "1080i" or "720p" to upscale analog video signals to 480p or 576p, 1080i or

720p of resolution.

OFITZOH IfiEI'4U

A?DISF'LAY SET I/2

÷ UI[!ECI-C:OI_U,

HDI'I I LII-_ I l_G

:::_THRGH * 4:E=E_J_

:÷:i *7:2@

[a_,] / [T] ::UF![,o_m

['<],'[_' ] _Seiect

OPTIOH H--q_U

A?DiSF'LAY SET

÷ DII'IMER.........

El

CISD-SH IFT ...... 0

CISD-SOURC:E= = =3E!s

0S[>-PI'IF'.

.....

3@

FL SCROLL...

COHT

[a_,] / [T] ::UF![,o_m

[,<],'[_, ] _Seiect

2/2

As a resuh of the paramewr setting in "DISPLAY SET", no screen may appear on the video

H]onitor.

In such a case, use

"V.RESET" (see page 93) m set the "VIDEO CONV.", "HDMI

UP-SCALING", "HDMl ASP" and "OSD SHIFT" settings to delhult.

Video conversion i...i

Use this feature to set whether to convert the video signals input at the VIDEO, S VIDEO and COMPONENT

VIDEO jacks.

Choices: ON, OFF

• Select "ON" to convert video signals (composite,

S-video or component) to composite, S-video, component or HDMI video signals.

• Select "OFF" not to convert any signals.

• The "HDMI UP-SCALING" parameter appears only when you set "VIDEO CONV." to "ON".

• If you connect your video monitor via HDMI connection, this unit automatically detects the available video signal resolution of the video moult(x; and an asterisk(,_) appears on the leli of the available video signal resolution(s).

• If this unit cannot detect the available video signal resolution(s) of the connected video monitor, set "MON. CHK" (see page 90) to "SKIP" and then set "HDMI UP-SCALING" aggtin.

• This unit does not convert between 480 line video signals and

576 line video signals. The resolution availability ("480p" or

"576p") depending on the modeh However, when the video monitor is connected to this unit via HDMI, the available resolutions of the monitor appears in the OSD.

• This unit does not convert between 480 line video signals and

576 line video signals.

• The analog component video signals with 480i (NTSC)/576i

(PAL) of resolution are converted to the S-video or composite video signals and output at the S VIDE() MONITOR OUT and

VIDEO MONITOR OUT jacks.

• The converted video signals are only output at the MONITOR

OUT jacks. When recording a video source, you must make the same type of video connections between each component.

• When composite video or S-video signals fl'om a VCR arc converted to component video signals, the picture quality may suffer depending on your VCR.

• Unconventional signals input at the composite video or S-video jacks cannot be converted or may be output abnormally.

In such cases, set "VIDEO CONV." to "OFF".

• When non-standard video signals (such as video signals l]-om a game console) are input, this unit may not convert the signals even if you set "VIDEO CONV." to "ON".

I

81 En

HDMI aspect ratio H[:,i"ii A:!;F:'

Use this feature to adjust the aspect ratio for video signals output at the HDMI OUT.jack.

OFIT IOH HEHU g ) _,lI Sl:lk g'_' SET 1/2

@

U I DEO-COIqlL,,,

HDiqZ I_._P

......

L-IH

HDI'I I UI-_.-SC:PL I HL_

*THRGH *48ELF

]:*1_SEq .72@=

THIRDI_IGH

[ak] ['i_'] _ UF '[/CIbJIq

[.<] '[_,] M_ei ec [

Choices: THROUGH, 16:9 NORMAL, SMART ZOOM

• Select "THROUGH" if you do not make any adjustments to the aspect ratio for HDMI video signal sources.

• Select "16:9 NORMAL" to display video images with

4:3 of aspect ratio on your video monitor with 16:9 of aspect ratio. Black stripes appear on the right and left sides as a result.

• Select "SMART ZOOM" to fit video images with 4:3 of aspect ratio to your video monitor with 16:9 of aspect ratio.

• When "HDMI UP-SCALING" is set to "THRGH" (see page 81), you cannot make any adjustments to "HDMI ASP".

• When "HDMI ASP" is set to "SMART ZOOM", the video images of the edge of the video monitor are rather stretched.

• When the video signals arc input at HDMI INjacks or the signals are input with 720p or 1080i of resolution, the setting of

"HDMI ASP" does not affect the video signals output at the

HDMI OUT jack.

Dimmer [:,]]"il"ii![F;?.

Use this feature to adjust the brightness of the front panel display.

Control range: 4 to 0

Control step: 1

• Press _)<1 to make the front panel display dimmer.

• Press (_)C:>to make the fl'ont panel display, brighter.

OSO shift 0:!!;i) :!!!;H

Use this feature to adjust the vertical position of the OSD.

Control range: 5 (upward) to +5 (downward)

Control step: 1

Initial setting: 0

• Press @<1 to raise the position of the OSD.

• Press (_)C:>to lower the position of the OSD.

Source feature OSD display time

0!!!; [:, ....-:!!; C:E

Use this feature to set the amount of time to display the

XM Satellite Radio information or iPod menu in the OSD after you perform a certain operation.

Choices: ON, 10s, 30s

• Select "ON" to display the OSD continuously during an operation.

• Select "10s" to turn off"the OSD 10 seconds after you perform a certain operation.

• Select "3(Is" to turn off"the OSD 30 seconds after you perform a certain operation.

Amplifier function OSD display time O:!!!;I)--AI"IP

Use this feature to set the amount of time to display, the status and sound field parameters information screen after you perform a certain operation.

Choices: ON, 10s, 30s

• Select "ON" to display the OSD constantly during an operation.

• Select "10s" to turn off"the OSD 10 seconds after you perform a certain operation.

• Select "3(Is" to turn off"the OSD 30 seconds after you perform a certain operation.

Front panel display scroll i:::L :!!;(?ROLl..

Use this feature to set whether to display the information

(such as a song title or a channel name) in the front panel display in a continuous manner or by the first 14 alphanumeric characters after scrolling all characters once when "XM" or "DOCK" is selected as the input source.

Choices: CONT, ONCE

• Select "CONT" to display the operation status in the front panel display in a continuous manner.

• Select "ONCE" to display the operation status in the front panel display by the first 14 alphanumeric characters after scrolling all characters once.

82 En

• Memory guard {_:,{l{{_{d_iiiIF?,{,?

Use this feature to prevent accidental changes to DSP program parameter values and other system settings.

Choices: OFF, ON

CIFITZCll/ HEI/LI

?OFF

CIH

[4]![>]:Select

[ ENTER ] : Return

Select "OFF" to turn off the "MEMORY GUARD" feature.

Select "ON" to protect: sound field program parameters all "SET MENU" items all speaker levels

SCENE template parameters

When "MEMORY GUARD" is set to "ON", you cannot select and adjust any other "SET MENU" items.

• Audio select C:::,f::li...ii:)i

Use this feature to designate the default audio input jack select setting for the input sources when you turn on the power of this unit.

Choices: AUTO, LAST

ClF'TZCIl/ HEI/LI

C )I]U[:, ZO SELECT

)I:ILITO LI_ST

[4] 'D.']:Select

[ EIq_ER ] : Return

Select "AUTO" if you want this unit to automatically detect the type of input signals and select the appropriate audio input ,jack select setting.

Select "LAST" if you want this unit to automatically select the last audio input jack select setting used for the connected input source.

Pl'r_(Otllf_.fil_,li_l_.m,l,liilJ_r-_1_Vllf-_111-'t:llll'._

• Parameter initialization

Use this feature to initialize the parameters of each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial factory settings.

Press the corresponding sound field program selector buttons on the remote control to select the sound field program that you want to initialize.

An asterisk (% appears to the left of the sound field program names that have been changed from their initial factory settings.

Choices: CLASSICAL, LIVE/CLUB,

ENTERTAINMENT, MOVIE, STEREO,

ENHANCER, SUR. DECODE

OPT I Ol'/ HEI,/LI

D) F'PI_:PI% iNi

C:LQSSICRL

LiUE 'CLUB

:÷EIqTERTgINIqENT

*I'ICIU ZE

STEREO

EIIHPNCEI_:

SUE:.

DEC:CiDE

F'tess DSF' Ke'-_

• You cannot automatically revert to the previous parameter settings once you initialize a so{lnd field program group.

• You cannot separately initialize individual sound field programs.

•

Yotl cannot initialize any sound field program groups when

"MEMORY GUARD" is set to "ON".

83 En

I

• XM Radio setting i

i:=u_ r,r i,

OF'TIOH HEMU

F)XI'I ,RJ_qbiq SET

XJ,i _;IHTEHHJ_q_,,95%

XM Radio antenna =...q','i

Use this feature to check the current reception level of the

XM Satellite Radio signals (see page 53). For the best reception, orient the XM Mini-Tuner so that a value of

60% or more is displayed here.

Display stares: NONE, 0 to l()()c/_

Note:

"NONE" is displayed il the XM Mini-Tuner Dock is not connected to this unit. In this case, check the antenna connections

(see page 53).

• iPod universal dock setting

OPT[OH IqEHLI

G) [!OC:KSET

STIZIHDB? C:H#IRGE_

IZILITCI

[4] {_] :Sele,:{:

[ EI4TER ] : Return

Charge on standby I:::IIi"'IIIiiIIii"'i::l_'i

Use this feature to select whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode (see page 58).

Choices: AUTO, OFF

Select "AUTO" to char=e the batter 5 of the stationed iPod when this unit is turned on and in the standby mode.

• Select "OFF" to charge the battery of tile stationed iPod only when this unit is turned on.

84 En

In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha and other manufacturers.

To control your TV or other components, you must set up the appropriate remote control code for each input source (see page 88).

• Controlling the input source components in the SCENE mode

You can operate both this unit and the input source component by using the remote control. You nmst set the appropriate remote control code for each input source in advance (see page 88).

1 Press the desired @SCENE button on the remote control.

2 Press the desired buttons in the * area below to control the input source component of the selected SCENE template.

SOURCE

• Setting the input source of the customized SCENE template on the remote control

If you customize the input source of the selected SCENE template, you must set the input source of the SCENE template on the remote control to operate the input source component correctly.

1 Press the desired @SCENE button on the remote control.

2

Press and hold the (_SCENE button and the desired input selector button (®).

The @TRANSMIT indicator flashes twice.

Keep holding down the buttons pressed in

step 2 until the @TRANSMIT indicator flashes twice again.

Note

11the setting ol the input source is not successlul, the

@TRANSMIT indicator llashes repeatedly. In this case, repeat the setup procedure.

SCENE buttons

' These buttons control the input source component. See page 87 lot details ol the function ol each button.

85 En

• Controlling this unit

Set the operation mode selector to @AMP to control this unit.

• Controlling a TV

Set the operation mode selector to @TV to control your

TV. To control your TV, you must set the appropriate remote control code fi)r DTV/CBL or PHONO (see page 88). When you set the remote control codes for both

DTV/CBL and PHONO, priority is given to the one set for

DTV/CBL.

_ @) C) CD

N;i;i;ii_il_

OOOO

Q@©@

m.

2 m.

1

"1=

m. 2

'1 These buttons always control this unit regardless ol the operation mode selector position.

'2 These buttons control this unit only w'hen the component operation mode selector is set to @AMP.

' 1These buttons always control your TV regardless of the operation mode selector position.

TV POWER

TV VOL

Turns the power on or off.

Increases or decreases the volut;le level.

TV (I1 +1

TV MUTE

( hanges the channel number.

Mtltes the audio output.

TV INPUT Changes the input source.

'2 These buuons control your TV only when the operation mode selector is set to _)'I'V. For details, see the "Digital TV/Cable

TV" column on page 87.

86 En

ilqlllq lilPi'ql I fi"t I[l'_'[l'_lfi"

•

Controlling other components

Set the operation mode selector to (_)SOURCE to control other components selected with the input selector buttons.

You must set the appropriate remote control code for each input source in adwmce (see page 88). The following table shows the function of each control button used to control other components assigned to each input selector button.

Be advised that some buttons may not correctly operate the selected component.

-#-

The remote control has 10 modes (input areas) to control components so that the remote control can operate up to 10 different comp(ments.

c.L_

L

(E) _ (E)

(E)@)

(D e9 (D (D

©@@®

'_

'_

AV POWER

1 9, lh +10

'_) TITLE

'_ PRESET/CH_ Up

PRESET/CII V

A E/CAT. <3

Pox_er

Numeric bunons

Title

Do_n

Left

Pox_er

Numeric buttons

VCRchannel up

VCR channel down

Pm_er 2

Numeric bunons

Up

Dm_n

Left

Pm_er

Numeric buttons

Pm_er

Numeric buttons

Pm_er

Numeric buttons

A E/CAT. _:> Right

ENTER Enter

'_ RETURN

'@) REC

Return

Disc skip

(player5

Rec (recorder5

Rec

,_7) ENT

,_

'_

<I<1

I1D

[2>{2>{

F-1

MENU

DISPLAY

Right

Enter

Return

Rec 2 Disc skip Rec

Play Play Play '2 Play Play Play

Search backward

Search backward

Search backward 2

Search fon_ ard

Search forward Search forward 2

Search backward

Search backward

Search backward

Search forward Search forward Search forward

Pause Pause Pause 2 Pause Pause Pause

Skip hackward Skip backward Skipback\_ard*2 Skip backward Skip hackward Skip backboard

Skip forward Skip for_ard Skip forward 2 Skip forward Skip for_ard Skip forward

Stop

Title/Index

Stop

Enter

Stop

Enter

2 Stop

Chapter/Time

Stop

Index

Stop

Index

Menu Menu

Display Display Display Display Display Display

Preset stations

(1 8)

Band

Presetup(l 85 Up

Preset dm_n

(1 85

Preset dov, n

(A E)

Preset up

(A E)

Do_n

Previous menu

Subsequent menu

Subsequent menu

Play

(Play/pause)'*

Search

backward s

Sea_vhIor_ard_?

Pause

(Play/pause5 *t

Skip backward

Skip forward

Stop

Previous menu

Display

'1 This

'_2 These breton buttons is operational operate your only when the original remote control supplied with the component

VCR or DVD recorder

'_3 Press and hold to search backward or li_rward.

only when you set the appropriatc has a POWER button.

remotc control code for DVR (see page 88).

'4 Simple remote mode (see page 58).

87 En

You can control other components by setting the appropriate remote control codes.

For a complete list of available remote control codes, refer to "List of remote control codes" at the end of this manual.

Remote control code default settings

CD

MD/CD-R

DVD

DTV/CBL

TUNER

XM

V-AUX

DVR

VCR

PHONO

CD

CD-R

DVD

YAMAHA

YAMAHA

YAMAHA

TUNER

TUNER

CYI'HER AUDIO

ACCESSORIES

(iPod}

DVR

YAMAHA

YAMAHA

YAMAHA

YAMAHA

62000

71292

42000

82005

82006

82000

52001

You may not be able to operate yo[Ir Yamaha c()mponent even il a

YAMAHA remote control code is preset as listed abox,e. In this case, try setIing another YAMAHA remote control code.

Press one of the input selector buttons (O) on the remote control to select the input area you want to set up.

CBL

(?E)@

Press @CODE SET using a ballpoint pen or a similar object.

The @TRANSMIT indicator on the remote control

!lashes twice, and the selected input selector button lights up.

\E/

Lights up

TBN_N_

©

Flashes

Press the numeric buttons (0 to 9) (®) to enter the five-digit remote control code for the component to be used.

The @TRANSMIT indicator on the remote control flashes twice, and the remote control code for the selected component is set.

CLASSICAL LI_OLUB ENTERTAIN MOVIE

IBAggN!

@qg@@

9UR DEe,0N

@@

NIGHT Flashes

Reler to "List ol remote control codes" at the end ol this lllantlah

• If the man[llhctorcr of your component has more than one code, try each of them until you find the correct one.

• If you do not press any buttons within 30 seconds in step

3, the setup process is canceled. If this happens, repeat the setup procedure.

• If you enter the code number "9980", the remote control code previously set for the selected input area is cleared.

88 En

Use this feature to cleat" all the remote conm)l codes previously set and reset all of them to the initial factory settings.

Press @CODE SET using a ballpoint pen or a similar object.

The @TRANSMIT indicator on the remote control flashes twice.

JRA_MIT

Flashes

Press the numeric buttons (®) to enter the

code number "9981 ".

The @TRANSMIT indicator on the remote control flashes twice, and all the remote control codes previously set are cleared and reset to the initial factory settings.

MOVIE CLASSICAL LWEfCLUEt ENTERTAIN

R S T pU_E_tR_

TBA_N_

SURDECODE NIGHT

Flashes

If you do not press any buttons witlfin30 seconds after step

2, the clearing process is canceled. In this case, repeat the clearing procedure.

i|qlilq|_li"iqllllqlll'_l|qlq"

89 En

Tiffs unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to ad,just and customize the way tiffs unit operates. Change the initial settings (indicated in bold under each parameter) to reflect tbe needs of your listening environment.

• Only _)STANDBY/ON, (_TONE CONTROL and the (_PROGRAM selector are eflecti_e x_hile you are using the ad_anced setup lllenl_t.

• No other operations can be made _hile you are using the advanced setup li_enu.

• The advanced setup menu is only available in the front panel display.

Press _TONE CONTROL repeatedly to

change the selected parameter setting.

1

Press _STANDBY/ON on the front panel to

set this unit to the standby mode. 5

Press _STANDBY/ON to save the new

setting and turn off this unit.

Press and hold @TONE CONTROL and then press _STANDBY/ON unit.

to turn on this

This unit turns on, and the advanced setup menu appears in the front panel display.

The settings you made are reflected next time you turn on this unit.

TO.ECO.TROL While holding clown

%

Rotate the _ PROGRAM selector to select the parameter you want to adjust.

The name of the selected parameter appears in the front panel display.

See page 91 for a complete list of available parameters.

Currently selected parameter

Currently selected parameter setting

90 En

See page 90 lor the operation ol the adxanced setup.

• Speaker impedance 5F:' lIMP.

Use this feature to set the speaker impedance of this unit so that it matches that of your speakers.

Choices: 8_Q MIN, 6_Q MIN

• Select "8f2 MIN" to set the speaker impedance to 8 f2

• Select "6f2 MIN" to set the speaker impedance to 6 f2

8_ MIN

6t_ MIN

Front

If you use one set (A or the impedance of each speaker m_lst be 8 t) or

B), higher.

If you use two sets (A and

B), the impedance ol each speaker m_lst be I6 t) or higher.*

(enter

Summnd

Surround back

The impedance oi each speaker retest be 8 t) or higher.

I::ront

If you use one set (A or B), the impedance of each speaker t;l[ist be 4 t) or higher.

If you use two sets (A and

B), the impedance of each speaker m_lst be 8 t) or higher.

Center

Surround

Surround back

The impedance oJ each speaker must be 6 t) or higher.

=_1'/_fl|'iq,Fi'_|'! ,

•

Remote control AMP ID

I:;I:KMOTE

Use this feature to set the AMP ID of this unit for remote control recognition.

This feature is useful when you operate this unit and the other Yamaha receivers/ amplifiers in the same room separately.

Choices: ID1, ID2

• Select "ID 1" when the remote control AMP ID code is set to "00001 ".

• Select "ID2" when the remote control AMP ID code is set to "00002".

Setting remote control AMP ID codes

You need to set the remote control AMP ID code for the remote control.

Press @CODE SET using a ballpoint pen or a similar object.

The @TRANSMIT indicator on the remote cotm-ol flashes twice.

Flashes

Press the numeric buttons (®) to enter the

code number "00001" or "00002".

The @TRANSMIT indicator on the remote control flashes twice, and the AMP ID code is changed.

CLASSICAL UVE/CLUB ENTERTAIN MOVIE

STEREO E

SUR,DECOOE NIGHT

T PV_E_RECT _A_SM_

F,ashes

=_ The Canada model cannot [ise Dao separate speaker systems

(A and B) sim[lhaneo[tsly when "SP IMP." is set to "8f2 MIN'.

•

User presets

i:::'i:?.i!!!:!!;ET

Use this feature to reset all the parameters of this unit to the initial factory settings (see page 101).

Choices: CANCEL, RESET

• Select "CANCEL" unit.

• Select "RESET" not to reset any parameters of this to reset the parameters of this unit.

00001

(initial setting)

00002

To operate this m_it using the delimh code.

To operate this unit using an ahernatixe code.

"1 The re;itote control selling

'2 The setting ol this unit

I DI

(initial setting)

ID2

• This setting completely resets all the parameters of this unit including the "SET MENU" parameters.

• The initial lactory settings arc activated next time you mm on this unit.

91 En

See page 90 h)rthe operation el the advanced setup.

•

Remote control

TUNER ID l:;I:i!3,i0Ti!!!

Use this feature to set the TUNER ID of this unit for remote control recognition.

Choices: ID1, ID2

• Select "ID 1" when the remote control TUNER ID code is set to "82005".

• Select "ID2" when the remote control TUNER ID code is set to "81949".

1

1

Setting remote control TUNER ID codes

You need to set the remote control TUNER ID library code for the remote control.

• Remote control XM ID Ri!!],i0iE ::.::M

Use this feature to set the XM ID of"this unit for remote control recognition.

Choices: ID1, tD2

• Select "IDI" when the remote control XM ID code is set to "82006".

• Select "ID2" when the remote control XM ID code is set to "82007".

Setting remote control XM ID codes

You need to set the remote control XM ID code for the remote control.

1 Press @XM to select "XM" as the input source.

Press @TUNER to select "TUNER" as the input source.

%

%

Press @CODE SET using a ballpoint pen or a similar object.

The @TRANSMIT indicator on the remote control flashes twice.

Press @CODE SET using a ballpoint pen or a similar object.

The @TRANSMIT indicator on the remote control flashes twice.

TBARSNT

Flashes rB_MI_

Flashes

Press the numeric buttons (®) to enter the

code number "82005" or "81949".

The @TRANSMIT indicator on the remote control flashes twice, and the TUNER ID code is changed.

CLASSICAL LIVFJCLUB ENTERTAIN MOVIE

Press the numeric buttons (®) to enter the

code number "82006" or "82007".

The @TRANSMIT indicator on the remote control flashes twice, and the XM ID code is changed.

CLASSICAL LIV_OLUB ENTERTAIN MOVIE

STEREO ENNANL,_'[NTRAIGHT PURED_¢T

TBA_S_t{T

SUR I_ECO[gE NIGHT

Flashes

STER_-'_,NHANCERSTRAIGHT

SUR DEGODE NIGHT

@ puRER_t_x' 5,

"-- ,'_"

TR/_SMI]

Flashes

82005

(initial setting)

81949

To operate this unit using the delimh code.

To operate this unit using an ahemati_ e code.

IDt

(initial setting)

ID2

'2 The setting el this unit

82006 To operate this unit using

(initial setting) the delauh code.

.................................................................................................

82007 To operate this unit using an alternative code.

'1 The remote control setting

=2The setting of this unit

IDt

(initial setting)

ID2

92 En

See page 90 lor the operation ol the adxanced setup.

• SCENE IR code

setting

'::."l"'i:::'i..ii::_"

Use this feature to output tbe remote control signals at the

REMOTE OUT,jack atttomatically when tbis unit is in the

SCENE mode.

Cboices: ON, OFF

• Select "ON" wben the component connected to tbe

REMOTE OUT jack is tbe Yamaba component and bas the capability of tbe SCENE c(mtrol signals. This unit atttomatically sends tbe remote control signals to the component.

• Select "OFF" when the component connected to the

REMOTE OUT ,jack is not the Yamaha component and does not have the capability of tbe SCENE control signals.

• Video parameter reset U=,I:;I:E:!!K!T

Use this feature to initialize the "VIDEO CONV.",

"HDMI UP-SCALING", "HDMI ASP" and "OSD

SHItq" settings in "DISPLAY SET" (see page 81).

Choices: YES, CANCEL

• Monitor check MOH=,C:HK

Use this feature to activate or deactivate the monitor check flmction of this unit. When this parameter is set to "YES", this unit receives the information of the available video signal resolutions from the video monitor connected via

HDMI (see page 81 ).

Choices: YES, SKIP

11noises are output when you operate the SCENE lunction, set

"SCENE IR" to "OFF".

• Bi-amplifier setting I!!!:]>-AMF::'

Use this feature to activate or deactivate the bi-amplifier flmction (see page 14).

Choices: ON, OFF

• Select "ON" if you want to activate the bi-amplifier flmction. "SUR.B L/R SP" is set to "NONE" automatically, and this unit outputs the front channel audio signals at the SURROUND BACK/BI-AMP speaker terminals.

• Select "OFF" if you want to deactivate the bi-amplifier function.

When "BI-AMP" is set to "ON", you can only select "FRONT B" or "NONE" in "EXTRA SP ASSIGN" {see page 72).

93 En

Refer to the table below when this unit does not function properly.

If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized

Yamaha dealer or service center.

•

General

This unit fails to turn on or enters the standby mode soon alter the power is turned on.

No sound.

No picture.

The power cable is not connected or the plug is not completely inserted.

The speaker impedance sening is incorrect.

The protection circuitry has been activated,

( onnect the power

Set the speaker cable l)rmly.

impedance to match your speakers.

This unit has been exposed to a strong extemaI electric shock (such as lighming or strong static electricity),

Incorrect input or output cable connections,

The optimizer microphone is connected.

Audio input jack select is set to "HDM[",

_( OAX/OVr" or "ANALOG".

Audio input jack select is set to

ANALOG" while playing a source encoded in Dolby Digital or DTS.

No appropriate input source has been selected,

Make sure that all speaker wire connections on this unit and on all speakers are secure and that the wires lor each connection do not touch anything other than their respective connections.

Set this unit to the standby

Set Audio

Set Audio

COAX/OPT".

mode, disconnect input jack select to "AUTO".

the power cable, plug it back in alter 30 seconds and then use this unit normally.

Connect the cables properly.

11the problem persists, the cables may be delective.

Disconnect the optimizer microphone.

input jack select to AUTO" or

Speaker connections are not secure.

The front speakers to be used have not been selected properly,

The volume is mined down.

The sound is muted.

Signals this unit cannot reproduce are being input Irom a source component, such as a CD-ROM.

The tlDM[ components connected to this unit do not support the IIDCP copy protection standards.

SUPPORT AUDIO" is set to _OTIIER" and tlDM[" audio signals are not being played back on this unit.

The output and input fi)r the picture are connected to diffi.,rent types ol video jacks,

Non-standard video signals are input.

Select an appropriate input source with the INPUT selector on the lront panel (or the input selector buttons on the tk?mote control).

Secure the connections.

Select the i?ont speakers by pressing @SPEAKERS on the lront panel repeatedly.

Turn up the volume.

Press @MUTE or @VOLUME +/on the remote control to resume audio output and then adjust the volume.

Play a source whose signals can be reproduced by this unit.

Connect tlDM[ components that support the tlD(P copy protection standards.

Set 'SUPPORT

MANUAL

AUDIO"

SETUP".

to RX-V861" in

Set _V CONV." to _()N" or connect your soutve components in the same way as you connect your video monitor to this unit.

......

25

13

......

37, 38

I3

38

40

......

16

77

82

18-23

3 I

39

39

94 En

The sound suddenly goes off.

Sound is heard from the speaker on one side only.

Only the center speaker outputs substantial sound.

No sound

No sound is heard from the surround speakers.

is heard from the center speaker.

No sound is heard from the presence speakers.

No sound is heard from the surround back speakers,

FRONT B speakers

cannot be activated,

No sound from the

center, surround or surround back speakers when the

FRONT B speakers are activated.

Presence speaker settings are not

available in "SET

MENU".

The protection circuitry has been activated because ol a short circuit, etc.

The sleep timer has turned this unit ofk

The sound is muted.

Incorrect cable connections.

(beck that the speaker impedance setting is correct.

Check that the speaker wires are not touching each other and then turn this unit back on.

Turn this unit on, and play the source again.

Press (_)MUTE or @VOLUME +/- on the remote control to restlme audio output.

Connect the cables properly, li the pmblem persists, the cables may be deibctive.

Adjust the "SPEAKER LEVEU' settings.

Incorrect settings in SPEAKER

LEVEL".

When playing a monaumI source with a

CINEMA DSP program, the source signal is directed to the center channel, and the front and surround speakers output eflect sounds.

_.

CENTER SP" in "SET MENU" is set to Set (ENTER SP" to "SML" or LRG".

_NONE".

-'--"-

One of the IliFi DSP programs (except for Try another sound field program.

'7ch Stere()") has been selected.

The sound field programs are turned oil Press @STRAIGHT to turn them on.

You are using a source or program combination that does not output sound from all channels.

_'EXTRA SP ASSIGN" is set to a setting other than PRESEN(E".

Try another sound field program.

Set _'EXTRA SP ASSIGN" to _PRESENCE".

SUR.

L/R SP" in _SET MENU" is set to Set 'SUR. L/R SP" to SML" or _LRG".

_'NONE".

This unit is in the _STRAIG|IT" mode and a monaural source is being played back.

Press @STRAIGHT on the front panel so that

_STRAIGIIT" disappears li'om the lront panel display.

SUR.

L/R SP" in "SET MENU" is set to Set SUR. L/R SP" and %UR.B L/R SP" to a setting

NONE" and SUR.B

L/R SP" is other than NONE".

automatically set to "NONE".

Set _'SUR.B L/R SP" to a setting other than 'NONE".

_'SUR.B L/R SP" in SET MENU" is set to "NONE".

EXTRA SP ASSIGN" is set to a setting other than "FRONT B".

Set 'EXTRA SP ASSIGN" to 'FRONT B".

_FRONT B" in _SPEAKER SET' is set to

ZONE B".

Set _FRONT B" to _FRONT".

_'EXTRA SP ASSIGN' is set to a setting other than PRESEN( E".

Set _'EXTRA SP ASSIGN' to 'PRESENCE".

25, 9t

......

40

74

73

42

47

37

72

73

47

73

73

72

72

72

95 En

117;Yr/,"/_"4;?;_h ir

No sound is heard from the subwoofer,

Dolby Digital or DTS sources cannot be played.

(Dolby Digital or DTS indicator in the front panel display does not light up.)

A humming sound is heard,

' LFE/BASS OUT" in SET MENU" is set to _FRONT" when a Dolby Digital or

DTS signal is being played.

%FE/BASS OUT" in _SET MENU" is set to SWFR" or _FRONT" when a

2-channel source is being played.

The source does not contain lowfrequency signals.

The connected component is not set to output Dolby Digital or DTS digital signals.

Audio input jack select is set to

'ANAL()(;".

Incorrect cable connections.

No connection from the turntable to the

GND terminal.

The record is being played on a turntable with an MC carlridge,

The volume level is low while a record is being played.

The volume level cannot be increased, or the sound is distorted.

The sound effects cannot be recorded,

A source cannot be recorded by a digital recording component connected to the

DIGITAL OUTPUT jack.

A source cannot be recorded by an analog component connected to the

AUDIO OUT (REC) jacks.

The sound field parameters and some other settings of this unit cannot be changed.

This unit does not operate properly,

No sound is heard from the connected

HDMI component,

The component connected to the AUDIO

OUT (REC) jacks of this unit is turned ofk

Set LFE/BASS OUT" to SWFR" or _BOTtt".

Set %t E/BASS OUT" to "BOTtt".

Make an appropriate setting ioltowing the operating instructions Ior your component.

Set Audio input jack select to AUTO".

( onnect the audio cables firmly.

If the problem persists, the cables may be defective.

Connect the grounding cable ol your turntable to the

GND terminal ol this unit.

Connect your turntable to this unit through an M(head amplifier.

Turn on the power ol the component.

It is not possibk, to record the som_d effects with a i_?cording component.

The source component is not connected to the DIGITAL INPUT jacks ol this unit.

Some components cannot record Dolby

Digital or DTS sources.

Connect the source component to the DIGITAL

INPUT jacks.

The som'ce component is not connected to the analog AUDIO IN jacks ol this mlit.

Connect the source component to the an:dog AUDIO

IN jacks.

_'MEMORY GUARIT' in SET MENU' is set to ' ON".

Set _'MEMORY GUARIT' to _OFF".

The internal microcomputer has been frozen by an external electric shock (such as lightning or excessive static electricity) or by a power supply with low vohage.

The tlDMI component does not accept the mr=hi-channel audio signals.

Disconnect the power cable i?orn the AC wall outlet and then plug it in again alter about 30 seconds.

Convert the multi-channel audio signals to the

2-channel audio signals at the source component such as a DVD playm_

72

72

......

39

2I

2I

.....

I9, 2I

2I

83

......

96 En

"CHECK SP WIRES" appears in the front panel display.

There is noise

interferencefrom digital or radio frequency equipment.

The picture is disturbed,

This unit suddenly enters the standby mode.

•

Tuner

Speaker cables are short-circuited.

Make sure all speaker cables are connected correctly.

This unit is too close to the digital or highfrequencyequipment.

Move this unit lurfl_er awa} from such equipment.

The video source uses scrambled or encoded signals to prevent dubbing.

The internal temperature is too high and the overheat protection circuit U has been activated.

Wait about I hour lor this unit to cool down and then turn it back on.

13

FM stereo reception is noisy.

The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too lar away or the antenna input is poor.

There is multi-path interierence.

Check the antenna connections.

Try using a high-quality directional FM antenna.

Use the manual tuning method.

Adjust the antenna position to eliminate multi-path interierence.

FM

AM

There is distortion, and clear reception cannot be obtained even with a good FM antenna.

The desired station cannot be tuned into

with the automatic tuning method.

Previously preset stations can no longer be tuned into.

The desired station cannot be tuned into

with the automatic tuning method.

There are continuous crackling and hissing noises,

There are buzzing whining noises.

and

The signal is too weak.

This unit has been disconnected for a long period.

The signal is weak or the antenna connections are loose,

Noise can result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment,

A TV set is being used nearby.

Use a high-quality directional FM antenna.

Use the manual tuning method.

Preset the stations again.

Tighten the AM loop antenna connections and orient the antenna lor the best reception.

Use the manual tuning method.

Use an outdoor antenna and a ground wire.

This will help somewhat, but it is difficult to eliminate all noise.

Move this unit away lrom the TV set.

24

50

......

50

.....

50

5 I

97 En

• XM Satellite

Radio

display. In this case, read the cause and follow the corresponding remedies.

L.Cl{:::l[)]i 1".1(!_

,=_:::'i:::'_","ri:::,

...'...

.................

...............

.." -.............

'::iC:{:::ITi::................

•

Remote control

The XM Mini-Tuner and XM Dock are not connected to the XM jack of this unit or do not work properly.

The XM user encr} ption code is bein_ updated.

The signal is too weak.

Check XM Mini-Tuner

Wait until the encryption and XM Dock and orient for the best reception Iex el.

connections code is updated.

It takes longer than lour seconds lk)r audio or text data to be decoded.

The XM Satellite Radio channel _,oLl selected is not currently broadcasting any signals.

The Channel Station ID (SID) is no kruger axailaNe.

No artist name or song title is a_aitable.

No channels are axaitable Ior the selected category.

Adjust the orientation ol the XM Mini-Tuner Ior the best reception lex et.

Wait until the decoding process has linished.

Check the channel ntli'rlber a_ain or select another

XM Satellite Radio channel.

Select another

@CATEGORY channel category by pressing on the front panel (or

<51/ [::>on the remote control) repeatedI_.

(_)A-E/CAT.

53

55

.....

53

......

......

The remote control does not work or function properly,

Wrong distance or angle.

The remote control v\ill Iunction within a maximum range of 6 m (20 It) and no more than 30 degrees offaxis from the lront panel.

Reposition this unit.

Direct sunlight or lighting (lrom an imerter type ol fluorescent lamp, etc.) is striking the remote control sensor o{ this unit.

The batteries are weak.

The operation mode selector is set incorrectly.

The set.

remote control code was not correctly

The ID code ol the remote control and the remote control IDol this unit do not t;latch.

Replace all batteries.

Set the operation mode selector correctly.

When operating this unit. set it to the @AMP position.

When operating the component selected by the input selector button, set it to the @SOURCE position.

When operating the TV set in the DTV or ! IIONO area.

set it to the @TV position.

Set the remote control code correctly using _List o{ remote control codes" at the end o{ this manual.

Try, setting another code oi the same manui?_tcturer

using _List oi remote control codes" at the end of this manual.

Match the remote control IDol this unit with the corresponding remote control ID code.

27

......

88

88

9 I

98 En

•

HDMI

HC,(_:P J!!!

ClR

l[]i...i'i- O'I::" {:;).@:B.

•

iPod

The ntwnber oi the connected components is over the limit, ttD( P authenticmion lailed.

ItDMI

Out of resolution.

The connected video monitor does not accept the output video signals at the HDM[ ()tit jack.

Reduce the number o{ the connected ItDMI components.

Check that the connected [ IDM [ components support the HDCP copy protection standards.

Set _IIDM1 UP SCALING" to _TItRGIt" or "480p"

(or '_576p").

......

8 I

In case ol a transmission error without a stattts message appearing in the h'ont panel and in the OSD, check the connection to your iPod

(see page 23).

I P'n:::u°4'l i"0:::l ......

This unit is in the middle of recognizing the connection with your iPod.

This unit is in the middle of acquiring song lists from your iPod.

There is a problem with the signal palh from your iPod to this unit.

Turn oil this unit and reconnect the Yamaha iPod unixersaI dock to the DO(K terminal ol this unit.

Tr 3, resetting your iPod.

Only iPod ((lick and Wheel), iPod nano, and iPod mini are supported.

Ui"!i.::i'!,:::,i.,.ii'! :i.Po,:::i The iPod being used is not supported by this unit.

J.{:::'OCi ,".,'_i.",i.",,::a,".'l'.,::a_"4 Your iI od is properly statkmed in a

Yamaha iPod unixersat dock (such as the

YDS-I [k sold separately) connected to the

DOCK terminal ol this unit. and the connection between your iPod and this unit is complete.

I? 'I ':::._='a"_i"_F'n::a_".'l'.gaPl

Your iI od was removed Irom a Yamaha iPod unixersal dock (such as YDS-I 0 sold separately) connected to the DOCK terminal oi this unit.

[ Ji.",.:::d."_ This unit cannot play back the songs currently stored on your iPod.

Station your iI od back in a Yamaha iI od unix ersat dock (such as YDS-I 0 sold separatet3,) connected to the DOCK terminal oi this unit.

Check that the songs currentt 3,stored on your iPod are playable.

Store some other playable music fries on your iPod.

•

AUTO SETUP

Before AUTO SETUP

23

......

23

.....

......

l'=:l"H"li'u:::'l".'k {"J ]i

(:: .i

Optimizer microphone is not connected.

tleadphones are connected.

Connect the supplied optimizer microphone to the OI TIMIZER MIC,jack on the iront panel.

Unplug the headphones.

28

......

99 En

m Ir/lTl7 ,"/_'21t'%'Tll_hi r

During AUTO SETUP

....'*...'I '..

C:' i1::, l...=i:r":i'....," '_...., ...,_':::'i:::'

_....i:::" ....,c:' o,...,

_....i::'

I"' i"i i2_ i'=q"' '..'2_i ii:::, =_ i..ir', ....,'::r

,",...,...., ,....r'.q

".,,....

i::r..... 'i i':a ,, T i..i"i"i:::'i:::,i..ii"li

After AUTO SETUP

Front L/R channel signals are not detected.

A s[nTound channel si_nat_ is not detected.

A presence channel signal is not detected.

Check tile Iront L/R speaker connections.

(heck tile surround speaker connections.

Check tile presence speaker connections.

Only a right surround back channel signal is Connect tile surrotmd back speaker to tile detected.

LEFT SURROUND BACK SPEAKERS terminal if }ou onl} ha*,eone surround back speaker.

Background noise is too loud.

T U running ;AUTO SETUP" in a quiet en*,iromnent.

Surround back speakers are connected, though surround L/R speakers are not.

Tile optimizer microphone was unplugged during tile AUTO SETUP" procedure,

Tile optimizer microphone does not detect test tones.

Turn ofl noisy electric equipment like air conditioners or mo,,e them awa 3, from tile optimizer microphone.

Connect s[irr() [ti/d speakers when

_'_°u use surround back speakers.

Connect tile supplied optimizer microphone to tile OI TIM IZER MI( jack on tile Iront panel.

(heck tile microphone setting.

Check tile speaker connections and placement.

Run "AUTO SETUP" a_ain._

Tile 'AUTO SETUP" procedure wits cancelled due to user actixit}.

An intemat error occurred.

Rtln "AUTO SETUP" a_ain.

......

13

28

28

13

28

28

I3

13

13

13 i.){-"" Speaker polarity is not correct. This message ma} appear depending on the speakers e*,en when the speakers are connected correctl}.

listening position is mer 24 rn (80 It).

The diiference ol *,()lume le*,el among_ speakers is excessi*,e, i.L...<.'i • i"'L.ii:::h'=q..

' i::M::M..i,:::" EXTRA SI ASSIGN" is set to

• channel signals are not detected.

Check tile speaker connections lor proper polarity (+ or ).

Bring the speaker closer to tile listening position.

Readjust tile speaker installation so that all speakers are set ill locations with similar conditions.

(heck the speaker connections.

Use speakers oI similar quality.

Adjust the output volm;le ol the subwooler.

(heck the presence speaker connections.

Set EXTRA SP ASSIGN" to a setting other than _PRESENCE".

13

.....

I3

......

28

13

72

• If the "ERROR" or "WARNING" screens appears, check the cause of the problem, then rim "AUTO SETUP" again.

• If a warning message "W- 1" appears, con'cctions arc made, but they may not be optimal.

• If a warning message "W-2" or "W-3" appears, no corrections are made.

• If an error message "E- 10" occurs repeatedly, contact a qualified Yamaha service center.

100 E_

Use this feature to reset all the parameters of this unit to the initial factory settings.

• This procedure completely resets all the parameters of this unit including the "SET MENU" parameters. However,the advanced setup menu parameters will not be initialized.

• The initial f:tctorysettings are activated next time you turn on this unit.

"li_cancel the initialization procedure at any time without making any changes, press @STANDBY/ON on the front panel to set this unit to the standby mode.

1 Press _STANDBY/ON on the front panel to set this unit to the standby mode.

2 Press and hold _TONE CONTROL and

then press _STANDBY/ON unit.

to turn on this

This unit turns on, and the advanced setup menu appears in the front panel display.

TONE While holding down %

3

Rotate the _PROGRAM selector to select

"PRESET".

4 Press _TONE CONTROL repeatedly to

select "RESET".

Select "CANCEL" to cancel the initialization procedure

_ithout making any changes.

Press _STANDBY/ON to confirm your selection and set this unit standby mode.

101 En

•

Bi-amplification

A l_i-amplification connection connection uses two amplifiers for a speakm: One amplifier is connected to the woofer section of a k)udspeaker while the other is connected to the combined mid and tweeter section.

With this arrangement each amplifier operates over a restricted fi'equency range.

This restricted range presents each amplifier with a much simpler ,job and each amplifier is less likely to influence the sound in some way. The internal crossover of the speaker consists ofa LPF (low pass filter) and a HPF (high pass filter).

As its name implies, the LPF passes frequencies below a cutoff and rejects frequencies the cutoff frequency.

Likewise, the HPF passes above frequencies above its cutoff.

• Component video signal

With the component video signal system, the video signal is separated into the Y signal for the luminance and the PB and PR signals for the chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the "color difference signal" because the luminance signal is subtracted from the color signal. A monitor with component input jacks is required in order to output component signals.

• Composite video signal

With the composite video signal system, the video signal is composed of three basic elements of a video picture: color, brightness and synchronization data. A composite video jack on a video component transmits these three elements combined.

• Dolby Digital

Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 fiHl-range audio channels. With an additional channel especially for bass effects, called LFE (Low Frequency Effect), the system has a total of 5.1-channels (LFE is counted as 0.1

channel). By using 2-channel stereo for the surround speakers, more accurate moving sound effects and surround sound environment are possible than with Dolby

Surround. The wide dynamic range from maximum to minimum volume reproduced by the 5 full-range channels and the precise sound orientation generated using digital sound processing provide listeners with unprecedented excitement and realism. With this unit, any sound environment fi'om monaural up to a 5.1-channel configuration can be freely selected for your enjoyment.

• Dolby Digital EX

Dolby Digital EX creates 6 full-bandwidth output channels fi'om 5.1-channel sources. This is done using a matrix decoder that derives 3 surround channels fi'om the

2 in the original recording. For the best results, Dolby

Digital EX should be used with movie sound tracks recorded with Dolby Digital Surround EX. With this additional channel, you can experience more dynamic and realistic moving sound especially with scenes with

"fly-over" and "fly-around" effects.

• Dolby Pro Logic II

Dolby Pro Logic tt is an improved technique used to decode vast numbers of existing Dolby Surround sources.

This new technology enables a discrete 5-channel playback with 2 fi'ont left and right channels, 1 center channel, and 2 surround left and right channels instead of only 1 surround channel for conventional Pro Logic technology. There are three modes available: "Music mode" for music sources, "Movie mode" for movie sources and "Game mode" for game sources.

• Dolby Pro Logic IIx

Dolby Pro Logic ilx is a new technology enabling discrete multi-channel playback fi'om 2-channel or multi-channel sources. There are three modes available: "Music mode" for music sources, "Movie mode" for movie sources (for

2-channel sources only) and "Game mode" for game sources.

• Dolby Surround

Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 fi'ont left and right channels (stereo), a center channel for dialog

(monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range. Dolby Surround is widely used with nearly all video tapes and laser discs, and in many TV and cable broadcasts as well. The Dolby

Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality.

•

DSD

Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio

CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio CDs.

102 En

• DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality for multi-channel sound on DVD video, and is fully backward-compatible with all DTS decoders. "96" refers to a 96 kHz sampling rate compared to the typical 48 kHz sampling rate. "24" refers to 24-bit word length. DTS 961

24 offers sound quality transparent to the original 96124 master, and 96/24 5.1-channel sound with full-quality fullmotion video for music programs and motion picture soundtracks on DVD video.

• DTS Digital Surround

DTS digital surround was developed to replace the analog soundtracks of movies with a 6.1-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 6.1-channel sound (technically, front left and right, center, surround left and right, and LFE 0.1

(subwoofer) channels for a total of 5.1 channels). This unit incorporates a DTS-ES decoder that enables 6.1 -channel reproduction by adding the surround back channel to the existing 5.1 -channel format.

• HDMI

HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital audio/video interface. Providing an interface between any source (such as a set-top box or AV receiver) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as well as multi-channel digital audio using a single cable. HDMI transmits all ATSC HDTV standards and supports 8channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements.

When used in combination with HDCP (High-bandwidth

Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operators. For further information on HDMI, visit the HDMI website at

"http://www.hdmi.org/".

• LFE 0.1 channel

This channel reproduces low-frequency signals. The frequency range of this channel is from 20 Hz to 120 Hz.

This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduced by the other 516 channels in Dolby Digital or

DTS 5.116.1-channel systems.

• Neo:6

Neo:6 decodes the conventional 2-channel sources for 6channel playback by the specific decoder. It enables playback with the full-range channels with higher separation just like digital discrete signal playback. There are two modes available: "Music mode" for music sources and "Cinema mode" for movie sources.

• Neural Surround

Neural Surround j'* represents the latest advancement in surround technology and has been adopted by XM

Satellite Radio for digital radio broadcast of surround recordings and live events in surround sound. Neural

Surround _'_employs psychoacoustic frequency domain processing which allows delivery of a more detailed sound stage with superior channel separation and localization of audio elements. System playback is scalable from 5.1 to

7.1 multi-channel surround playback.

• PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression.

This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for "Pulse Code

Modulation", the analog signal is encoded as pulses and then modulated for recording.

• Sampling frequency and number of quantized bits

When digitizing an analog audio signal, the numher of times the signal is sampled per second is called the sampling frequency, while the degree of fineness when converting the sound level into a numeric value is called the number of quantized bits. The range of rates that can be played back is determined based on the sampling rate, while the dynamic range representing the sound level difference is determined by the number of quantized bits.

in principle, the higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number of quantized bits, the more finely the sound level can be reproduced.

• S-video signal

With the S-video signal system, the video signal normally transmitted using a pin cable is separated and transmitted as the Y signal for the luminance and the C signal for the chrominance through the S-video cable. Using the S

VIDEO .jack eliminates video signal transmission loss and allows recording and playback of even more beautiful images.

103 En

• Elements of a sound field

What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and shape of the room in which we are sitting.

There are two distinct types of sound reflections that combine to make up the sound field in addition to the direct sound coming straight to our ears from the player's instrument.

Early reflections

Reflected sounds reach our ears extremely r@idly (50 ms to 100 ms after the direct sound), after reflecting from one surface only (for example, from a wall or the ceiling).

Early reflections actually add clarity to the direct sound.

Reverberations

These are caused by reflections from more than one surface (for example, from the walls, and the ceiling) so numerous that they merge together to form a continuous sonic afterglow. They are non-directional and lessen the clarity of the direct sound.

Direct sound, early reflections and subsequent reverberations taken together help us to determine the subjective size and shape of the room, and it is this information that the digital sound field processor reproduces in order to create sound fields.

if you could create the appropriate early reflections and subsequent reverberations in your listening room, you would be able to create your own listening environment.

The acoustics in your room could be changed to those of a concert hall, a dance floor, or a room with virtually any size at all. This ability to create sound fields at will is exactly what Yamaha has done with the digital sound field processor.

• CINEMA DSP

Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound heard. Based on a wealth of actually measured data, Yamaha CINEMA DSP uses Yamaha original sound field technology to combine Dolby Pro Logic, Dolby

Digital and DTS systems to provide the audiovisual experience of a movie theater in the listening room of your own home.

• SILENT CINEMA

Yamaha has developed a natural, realistic sound effect

DSP algorithm for headphones.

Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed on headphones.

• Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any surround speakers by using virtual surround speakers. It is even possible to enjoy Virtual

CINEMA DSP using a minimal two-speaker system that does not include a center speaker.

• Compressed Music Enhancer

The Compressed Music Enhancer feature of this unit enhances your listening experience by regenerating the missing harmonics in a compression artifact. As a result, flattened complexity due to the loss of high-frequency fidelity as well as lack of bass due to the loss of lowfrequency bass is compensated, providing improved performance of the overall sound system.

104 En

This unit employs Yamaha Parametric Room Acoustic

Optimizer (YPAO) technology to optimize the frequency characteristics of its parametric equalizer to match your listening environment.

YPAO uses a combination of the following three parameters (Frequency, Gain and Q factor) to provide highly precise adjustment of the frequency characteristics.

• Frequency

This pm'ameter is adjustable in one-third octave increments between 32 Hz and 16 kHz.

• Q factor

The width of the specified frequency band is referred to as the Q factor. This parameter is adjustable between the values 0.5 and 10.

_==' +6 dB ggNgg _

• Gain

This parameter is adjustable in increments of 0.5 dB between 20 and +6 dB.

_===+6dB

N _ N g g _ _

YPAO adjusts frequency characteristics to suit your listening requirements using a combination of the above three parameters (Frequency, Gain and Q factor) for each equalizer band in this unit's parametric equalizer. This unit has 7 equalizer bands for each channel.

The use of multiple equalizer bands enables more precise adjustments of frequency characteristics (as in Figure 2).

This is not possible using only a single equalizer band (as in Figure 1).

Figure 1

Frequency characteristicafter correction

Gain

Band I

Frequency

Original lrequenc) characteristic

Figure 2

I:req[lenc_ char:tctoristic correction alter

_

Gain

I

I

I

I

I

I i

I

"

Band 2

I

_

I charact_istic

)

105 En

AUDIO SECTION

• Minimt*m RMS Output Po_\ er for t ront, Center, Summnd,

St*rotund back

I kItz, 0.7'_ TIID, 8 t) ......................................................

• Dynamic Power (IIIF)

Front L/R, 8/6/4/2 t) .....................................

140/I75/205/250

• Maximum Output Power lEt*rope model]

Speaker impedance setting: 8 _ I kllz, 0.7% TIID, 4 _

..........................................................................................

I55W

W

• Dynamic tleadroom IU.S.A.

and Canada models only]

8 t) .....................................................................................

• IEC Output Power lEt*rope model]

Front L/R, t kitz, 0.06% TIlD, 8 _} ...................................

I20 W

1.25 dB

I I5 W

• Damping Factor (ItlF)

Front L/R, SPEAKERS A, 20 tlz to 20 ktlz, 8 t)

..................................................................................

• Input Sensitivity/lnpt*t Impedance

PttONO (MM) ........................................................

CD, etc ..................................................................

MULTI C|I INPUT ...............................................

120 or more

3.5 mVN7 k_

200 mVN7 k_

200 mVN7 k_}

• Maximum Input Vohage

PItONO (MM)

I ktlz, 0. 1% TtlD ..............................................

CD, etc.

Effect On, I ktlz, 0.5% THD ...............................

60 mV or more

2.3 V or more

• Rated Output Voltage/Outpt*t Impedance

OUT (REU) ..........................................................

PRE OUT .................................................................

SUBWOOFER (2ch Stereo, FRONT SP: SMALL)

................................................................................

200 mV/1.2

k_

1.0 V/1.2 k_}

1.0 V/1.2 k_}

• lteadphone Jack Rated Outpt*t/lmpedance

CD, etc. (I ktlz, 50 mV, 8 _}) ................................

150 mV/100 _}

• trequency Response

CD to Front L/R, 10 tlz to 100 ktlz ...............................

+0/3 dB

• RIAA Equalization Deviation

PIIONO (MM) .............................................................

0 _+ 0.5 dB

• Total tlarmonic Distortion

PItONO (MM) to OUT (REC)

20 tlz to 20 ktlz, t V ............................................

CD, etc. to Front L/R

0.02% or less

2ch Stereo, 20 ltz to 20 kitz, 50 W, 8 t) ...............

0.06% or less

• Signal to Noise Ratio (ItlF-A Network)

PttONO (MM, 5 mV) to OUT (REC) lEt*rope model] ........................................................

{U.S.A.

and Canada models{ ..................................

CD, etc. (Effect Off, 250 mV) to Front L/R

............................................................................

8I dB or more

86 dB or more

I00 dB or more

• Residual Noise (IttF-A Network)

Front L/R ................................................................

I50 _aV or less

• Channel Separation (I ktldl 0 kttz)

PItONO (shortened) to Front L/R ...............

60 dB/55 dB or more

(D, etc.

(5.I

kt) shortened) to Front L/R ..............

60 dB/45 dB or more

• Volume Control ......................................

MUTE/ 80dB to I6.5 dB

• Tone Control (Front L/R)

BASS Boost/Ct*t ......................................................

_+I0 dB/50 ttz

BASS Turnover Frequency .................................................

TREBLE Boost/Ct*t ..............................................

350 tlz

_+t0 dB/20 kttz

TREBLE Turnover Frequency ...........................................

3.5 kItz

• Filter Characteristics

II.RF.

(1_:=40/60/80/90/100/t 10/I 20/I 60/200 [lz)

(FRONT SP, CENTER SP, SUR. L/R SP, SUR.B

L/R SP:

SMALL/SML) ............................................................

12 dB/oct.

L.RE

(St*bwoofer) .........................................................

24 dB/oct.

VIDEO SECTION

• Video Formal (Gray Back)

I U.S.A.

and Canada models] ...............................................

IEurope modeIl .......................................................................

• Video Format (Video Conversion) .................................

NTSC

PAL

NTS(/D\L

• Signal Level

Composite .................................................................

I Vp-p/75 t}

S-video ............................

Component ...................

I Vp-p/75 t Vp-p/75 t) (y), 0.286

Vp-p/75 tl (Y), 0.7 Vp-p/75 t) (C) t) (IS_/PR)

• Maximum Input Le_ el (Video Conversion Off)

...............................................................................

• Signal to Noise Ratio

....................................................................................

1.5 Vp-p or more

50 dB or more

• Frequency Response (MONITOR OUT)

( omponent (Video Corn ersion Off)

...............................................................

5 tlz to 60 M}tz, 3 dB

FM SECTION

• Tuning Range

{U.S.A.

and Canada models] ..........................

IEurope modal] ...........................................

87.5 to 107.9 Mttz

87.50

to I08.00

Mtlz

• 50 dB Quieting Sensitivity (ItlF)

1 kllz, 100%MOD., Mono ...............................

• Signal to Noise Ratio (ltlF]

Mono/Stereo .............................................................

2.8 _.lV (20.2 dBf)

73 dB/70 dB

• Harmonic Distortion (I kltz)

Mono/Stereo .........................................................................

• Antenna Input (unbalanced) .........................................................

0.5%

AM SECTION

• Tuning Range

IU.S.A.

and Canada models] ..............................

{Europe model] ...................................................

530 to 1710 kt tz

53I to I6II kItz

GENERAL

• Power Supply

{U.S.A.

and Canada models] .............................

lEt*rope model] ..................................................

AC 120 V, 60 ttz

AC 230 V, 50 tlz

• Power Consumption

{U.S.A.

and Canada models] .................................

lEt*rope model} ...................................................................

400 W/500 VA

440 W

• Standby Power ( onst*mption ......................................

0.t W or less

• AC Outlets

{U.S.A.

and Canada models] ..............

2 (Total 100 W maximum) lEt*rope model] .....................................

2 (Total 50 W t;laxit:nt*t;1)

• Dimensions (W x tl x D) .................................

435 x 171 x 42I mm

( 17-I/8 x 6-3/4 x 16-9/16 in)

• Weight ............................................................

I3.I

kg (28 Ibs I4 oz)

'_'Specifications arc subject to change without notice.

106 En

• Numerics

1 SOUND MENU, Manual setup ........ 69

2 INPUT MENU, Manual setup .......... 69

2cb Enhancer, Sound field program ....46

2cb STEREO, Sound field program ....46

3 OPTION MENU, Manual setup ....... 70

7cb Enhancer, Sound field program ....46

7cb STEREO, Sound field program ....46

96124 indicator .....................................

27

• A

A)DISPLAY SET, Option menu ......... 81

A)I/O ASSIGNMENT, Input menu ..... 78

A)SPEAKER SET, Sound menu ...........

A.DELAY, Audio settings ................... 76

AC OUTLETS (SWITCHED) ............. 24

Action Game, Sound field progi'am .....44

Advanced setup ....................................

90

Advanced sound configurations ........... 61

Adventure, Sound field progranl ......... 45

ALL CH SEARCH, XM tuning ........... 55

All Channel Sealxcb mode,

XM tuning ........................................

55

All remote control codes resetting ....... 89

AM antenna connection ....................... 24

AM tuning ............................................

50

Amplifier function OSD display time,

Display settings ................................

82

Audio cable plugs ................................

15

Audio component', connection ............. 21

Audio delay, Audio settings ................. 76

Audio inl_nnation ................................

41

Audio input jacks selection .................. 39

AUDIO jacks .......................................

15

Audio jacks ..........................................

15

AUDIO SELECT .................................

39

Audio select, Option menu .................. 83

Audio settings, Sound menu ................ 76

Audio signal flow .................................

17

AUTO SETUP ...............................

28.69

Auto setup ............................................

69

AUTO:RES ULT ..................................

31

Automatic preset tuning,

FM/AM tuning .................................

51

Automatic tuning, FM/AM tuning ....... 50

Available decoders with Sound field progi'ams .............. 66

• B

B)INPUT RENAME, Input menu ....... 79

B)MEMORY GUARD, Option menu ... 83

B)SPEAKER LEVEL, Sound menu .... 74

Bass cross over, Speaker settings ........ 74

BGV, Multi channel input settings ...... 80

BI-AMP, Advanced setup .................... 93

Bi-Amplifier, Advanced setup ............. 93

• C

C)AUDIO SELECT, Option menu ...... 83

C)SP DISTANCE, Sound menu .......... 75

C)VOLUME TRIM, Input menu ......... 80

C.IMAGE, Decoder pm'ameter ............ 68

Cable plugs ...........................................

15

CAT SEARCH, XM tuning ................. 55

CD player connection ...........................

21

Cellar Club, Sound field program ........ 43

CENTER GEQ, Equalizer .................... 76

Center graphic equalizer, Equalizer ....... 76

CENIER PRE OUT jack connection ....22

CENTER SP, Speaker settings ............. 73

Center speaker level,

Sound field parameter ...................... 66

Center speaker, Speaker settings .......... 73

CENTER WIDTH,

Decoder parameter ...........................

68

Chamber, Sound field program ............ 43

Chm;ge on standby, iPod universal dock setting .............. 84

CLASSICAL, Sound field category .....43

CMPNT-V INPUT, lnpuVoutput assigmnent ................... 78

COAXIAL IN,

Input/output assigmnent ................... 79

COAXIAL INPUT jack assignment, lnpul/output assigmnent ................... 79

COMPONENT VIDEO jack assigmnent, lnpuVoutput assignment ................... 78

COMPONENT VIDEO jacks .............. 15

Compressed Music Enhancer ............... 46

Compressed Music Enhancer effect level,

Sound field parameter ...................... 66

Connection, AM antenna connection ...... 24

Connection, audio components ............ 21

Connection, CD player ......................... 21

Connection,

CENTER PRE OUT jack ................. 22

Connection, DVD player ......................

19

Connection, DVD recorder .................. 20

Connection, External amplifier ............ 22

Connection, external decoder ............... 22

Connection, FM antenna ...................... 24

Connection,

FRONT PRE OUT jacks .................. 22

Connection, iPod universal dock .......... 23

Connection, Multi-lk_rnmt player ......... 22

Connection, Power cable ...................... 24

Connection, projector ...........................

18

Connection, PVR ..................................

20

Connection, set-top boxes .................... 20

Connection, speaker cable .................... 14

Connection,

SUBWOOFER PRE OUT jack ........ 22

Connection,

SUR.BACK PRE OUT jacks ........... 22

Connection,

SURROUND PRE OUT jacks ......... 22

Connection, Turntable ..........................

21

Connection, TV monitor ...................... 18

Connection, VCR .................................

20

CROSSOVER, Speaker settings .......... 74

CT LEVEL, Sound field parameter ..... 66

Current status display ..........................

39

• D

D)DECODER MODE, Input menu ..... 80

D)EQUALIZER, Sound menu ............ 75

D)PARAM.lNl, Option menu ............. 83

Decoder descriptions ...........................

67

Decoder indicators ...............................

26

Decoder mode ......................................

80

Decoder mode, Input menu ................. 80

Decoder select mode,

Decoder mode .................................

80

Decoder selection ................................

66

Decoder type, Extended surround decoders ...........................................

DIALG.LIFT,

77

Sound field parameter ..................... 62

Dialogue left,

Sound field parameter ..................... 62

DIGITAL COAXIAL jacks ................. 15

DIGITAL OPTICAL jacks ..................

15

DIMENSION, Decoder parameter ...... 68

DIMMER, Display settings ................. 82

Dimmer, Display settings .................... 82

Direct nmnber access mode,

XM tuning .......................................

55

DIRECT, Sound field parameter ......... 66

DISPLAY SET ....................................

81

Display settings, Option menu ............ 81

DIST, Auto setup result .......................

30

DISTANCE, Auto setup parameter ..... 30

DOCK indicator ...................................

26

Drama, Sound field program ............... 45

DSP effect level,

Sound field parameter ..................... 62

DSP indicators .....................................

26

DSP LEVEL, Sound field parameter .... 62

DVD player connection .......................

19

DVD recorder connection .................... 20

Dynamic range, Sound menu .............. 76

• E

E)LFE LEVEL, Sound menu .............. 76

E)MULTI CH SET, Input menu .......... 80

ENHANCER indicator ........................

26

ENTERTAINMENT, Sound field category ...........................................

44

EQ TYPE SELECT, Equalizer ............ 75

EQ TYPE, Auto setup parameter ........ 29

Equalizer type select, Equalizer .......... 75

Equalizer, Sound menu ........................

75

EQUALIZING,

Auto setup parameter ...................... 30

Extended surround decoders,

Sound menu .....................................

77

External amplifier connection ............. 22

External decoder connection ............... 22

EXTRA SP ASSIGN,

Auto setup parameter ...................... 29

107 En

l_._

EXTRA SP ASSIGN,

Speaker settings ...............................

72

Extra speaker assignment,

Auto setup parameter .......................

29

Extra speaker assigmnent,

Speaker settings ...............................

72

• F

F)DYNAMIC RANGE, Sound menu .... 76

F)XM RADIO SET, Option menu ....... 84

EL SCROLL, Display settings ............. 82

FM antenna ..........................................

24

FM antenna connection ........................

24

FM tuning ............................................

FRONT B speaker setting,

50

Speaker settings ...............................

72

FRONT B speakers setting .................. 72

FRONT B, Speaker settings ................. 72

Front input,

Multi channel input settings ............ 80

Front panel display ...............................

26

Front panel display scroll,

Display settings ...............................

82

FRONT PRE OUT jack connection ..... 22

FRONT SP, Speaker settings ............... 73

Front speaker set selection ................... 38

Front speakers, Speaker settings .......... 73

FRONT,

Multi channel input settings ............ 80

• G

G)AUDIO SET, Sound menu .............. 76

G)DOCK SET, Option menu ............... 84

• H

H)HDMI SET, Sound menu ................ 77

Hall in Munich,

Sound field program ........................

43

Hall in Vienna, Sound field program ..... 43

HDMI ...................................................

16

HDMI ASP, Display settings ............... 82

HDMI aspect ratio, Display settings ..... 82

HDMI IN jack assignment,

Input/output assignment .................. 79

HDMI IN, Input/output assignment ..... 79

HDMl indicator ....................................

26

HDMl setting, Sound menu ................. 77

HDMl UP-SCALING,

Display settings ...............................

81

HDMl Up-scaling, Display settings ..... 81

Headphone, Dynamic range ................. 76

HEADPHONE, Low-frequency el'llect level .................................................

76

Headphone,

Low-l?equency

effect level .............. 76

Headphones ..........................................

40

Headphones indicator ..........................

26

HP, Dynamic range ..............................

76

• I

I)EXTD SUR., Sound menu ................ 77 lnfl'ared window ...................................

27

INI.VOL., Audio settings .................... 77

INIT.DLY, Sound field parameter ....... 63

Initial delay, Sound field parameter .....63

Initial volume, Audio settings .............. 77

INPUT CH,

Multi channel input settings ............. 80

Input channel and speaker indicatocs .....27

Input channel indicators ....................... 27

Input channels,

Multi channel input settings ............. 80

Input menu, Manual setup .................... 69

Input rename, Input menu .................... 79

Input signal indicators ..........................

26

Input source indicators ......................... 26

Input source information display ......... 40 lnput/output assignment, Input menu ....78

iPod universal dock connection ........... 23 iPod universal dock setting .................. 84 iPod universal dock setting,

Option menu ....................................

84 iPod use ................................................

58

• d

Jacks .....................................................

15

• L

LEVEL, Auto setup parameter.

............ 30

LFE indicator .......................................

27

LFE/BASS OUT, Speaker settings ...... 74

LFE/Bass out, Speaker settings ............ 74

LIVE/CLUB, Sound field category ..... 43

LI VENESS, Sound field parameter .....64

Liveness, Sound field parameter .......... 64

Low-fl'equency el'li_ct level,

Sound menu .....................................

76

LVL, Auto setup result ......................... 30

• M

Manual preset tuning,

FM/AM tuning .................................

51

MANUAL SETUP ...............................

69

Manual setup ........................................

69

Manual tuning, FM/AM tuning ............ 50

MAX VOL., Audio settings ................. 77

Maximum volume ................................

77

Maximum volume, Audio settings ....... 77

Memory guard, Option menu ............... 83

MODE, Extended SmTound decoders ..... 77

Mode, Extended surround decoders ........ 77

MON.CHK, Advanced setup ............... 93

Monitor check, Advanced setup ........... 93

Mono Movie, Sound field program ...... 45

MOVIE, Sound field category ............. 45

MULTI CH INPUT component selection ........................ 38

MULTI CH INPUT jacks .................... 22

Multi channel input settings,

Input menu .......................................

80

Muhi-channel source playback in 2-channel stereo ...........................

49

Muhi-channel source playback with headphones ..............................

46

Multi-format phtyer connection ........... 22

Multi-information display .................... 27

MUSIC ENHANCER,

Sound field category ........................ 46

Music Video, Sound field program ....... 44

MUTE ..................................................

40

MUTE indicator ..................................

26

Muting .................................................

40

MUTING TYPE, Audio settings ......... 76

Muting type, Audio settings ................ 76

• N

Net:6 Cinema, Decoder type ........ 66.67

Net:6 Music, Decoder type ................. 67

Neural Sur., Decoder type ...................

67

NIGHT indicator .................................

26

Night listening mode ...........................

49

Number of speakers,

Auto setup result .............................

30

• O

Operation mode selector ......................

27

OPTICAL IN,

Input/output assignment ..................

79

OPTICAL INPUT jack assignment,

Input/output assignment ..................

79

OPTICAL OUT,

Input/output assignment ..................

79

OPTICAL OUTPUT jack assignment,

Input/output assignment ..................

79

OPTIMIZER MIC jack .......................

28

Option menu, Manual setup ................ 70

OSD SHIbT, Display settings ............. 82

OSD shift, Display seuings ................. 82

OSD-AMP, Display settings ............... 82

OSD-SOURCE, Display settings ........ 82

Other components controlling by remote control ............................

87

Other components controlling,

Remote control ................................

87

• P

P.INIT.DLY, Sound field parameter ...... 63

P.ROOM S IZE,

Sound field parameter .....................

(_

PANORAMA, Decoder parmneter ...... 68

Parameter initialization,

Option menu ....................................

83

Parametric equalizer information ...... 105

Parametric equalizer type,

Auto setup parameter ......................

29

Parmnetric equalizer,

Auto setup parameter ......................

30

PHONES jack ......................................

40

PLII Game, Decoder type ....................

67

PLII Movie, Decoder type ...................

67

PL LEVEL, Sound field parameter ..... 66

Playing video sources in the background ............................

40

PLII Movie, Decoder type ............. 66, 67

PLIIx Game, Decoder type ..................

67

PLIIx Movie, Decoder type ........... 66.67

PLIIx Music, Decoder type ................. 67

Power cable connection .......................

24

PR LEVEL, Sound field parameter ..... 66

Presence and surround back speaker indicators ............................

27

108 E_

Presence left speaker level,

Sound field parameter.

..................... 66

Presence right speaker level,

Sound field parameter ......................

Presence sound field initial delay,

66

Sound field parameter ...................... 63

Presence sound field room size,

Sound field parameter ...................... 64

Presence/Surround back channel priority,

Speaker settings .................................

Preset channel setting, XM tuning ....... 56

Preset SCENE templates ...................... 35

Preset Search mode, XM tuning .......... 55

PRESET SEARCH, XM tuning ........... 55

Preset station selection,

FM/AM tuning .................................

52

Preset stations exchange,

FM/AM tuning ...................................

PRESET, Advanced setup ................... 91

PI_.IORITY, Speaker settings .................

PRO LOGIC, Decoder type ........... 66.67

Projector connection ............................

18

Pure Direct ...........................................

48

Pure hi-fi sound ....................................

48

PVR connection ...................................

20

• R

Rear panel ............................................

11

REMOTE AMP, Advanced setup ........ 91

Remote control AMP ID,

Advanced setup ................................

91

Remote control code default settings .................................

88

Remote control codes ...............................

Remote control codes setting ............... 88

Remote control TUNER ID,

Advanced setup ................................

92

Remote control XM ID,

Advanced setup ................................

92

REMOTE IN/OUT jacks ..................... 23

REMOTE TUN, Advanced setup ..........

REMOTE XM, Advanced setup .......... 92

Rename, SCENE template ................... 36

Repeat ..................................................

59

Repeat, iPod playback ..........................

59

Resetting the system ..........................

101

REV.DELAY, Sound field parameter ....65

REV.LEVEL, Sound field parameter ..... 65

REV.TIME, Sound field parameter ..... 65

Reverberation delay,

Sound field parameter ...................... 65

Reverberation level,

Sound field parameter ...................... 65

Reverberation time,

Sound field parameter ...................... 65

Roleplaying Game,

Sound field program ........................ 44

ROOM SIZE, Sound field parameter ...... 64

Room size, Sound field parameter .......... 64

• S

S VIDEO jacks .....................................

15

S.INIT.DLY, Sound field parameter ..... 63

S.LIVENESS. Sound field parameter ..... 64

S.ROOM SIZE,

Sound field parameter ...................... 64

SB INLDLY, Sound field parameter .....63

SB LEVEL, Sound field parameter ....... 66

SB LIVENESS,

Sound field parameter ...................... 64

SB ROOM SIZE,

Sound field parameter ...................... 64

SCENE 1 ................................................

9

SCENE 2 ................................................

9

SCENE 3 ................................................

9

SCENE 4 ................................................

9

SCENE IR code setting,

Advanced setup ................................

93

SCENE IR, Advanced setup ................ 93

SCENE template rename ...................... 36

Sci-Fi, Sound field program ................. 45

Selection, Audio input jacks ................ 39

Selection, Front speaker set .................. 38

Selection,

MULTl CH INPUT component ....... 38

Selection, SCENE template ................. 33

SET MENU usage ................................

71

Set-top box connection ......................... 20

Shuffle, iPod playback ......................... 59

SlLENT ClNEMA ...............................

46

SlLENT ClNEMA indicator ................ 26

SIZE, Auto setup parameter.

................ 30

SL LEVEL, Sound field parameter ......66

SLEEP indicator.

..................................

27

Sleep timer ...........................................

41

Sound field indicators ..........................

26

Sound field programs ...........................

42

Sound field programs with headphones ...............................

46

Sound field programs without surround speakers ............... 46

SOUND MENU, Manual setup ............ 72

Sound menu, Manual setup .................. 69

Source feature OSD display time,

Display settings ................................

82

SPA B indicators .................................

26

S P IMP., Advanced setup ..................... 91

SP, Auto setup result ............................

30

SP, Dynamic range ...............................

76

Speaker cable connection ..................... 14

Speaker distance,

Auto setup parameter ....................... 30

Speaker distance, Auto setup result ..... 30

Speaker distance, Sound lnenu ............. 75

Speaker distances .................................

75

Speaker impedance setting ................... 25

Speaker impedance, Advanced setup ...91

Speaker level adjustment ...................... 48

Speaker level, Auto setup parameter ..... 30

Speaker level, Auto setup result ........... 30

Speaker level, Sound menu .................. 74

Speaker settings, Sound menu .............. 72

Speaker size, Auto setup parameter .....30

Speaker wiring,

Auto setup parameter ....................... 30

Speaker, Dynamic range ...................... 76

SPEAKER,

Low-li-equm_cy efl'cct level .............. 76

Speaker,

Low-fi'equency efliect level ............. 76

Specifications ....................................

106

Spectacle, Sound field program ........... 45

Sports, Sound field program ................ 44

SR LEVEL, Sound field parameter ..... 66

Standard, Sound field program ............ 45

STANDBY CHARGE, iPod universal dock setting ............. 84

Standby mode ......................................

25

STANDB Y/ON ...................................

25

STEREO, Sound field category ........... 46

STRAlGHT .........................................

47

STRAIGHT mode ...............................

47

SUBWOOFER PHASE,

Speaker seuings ...............................

74

Subwoofer phase, Speaker settings ..... 74

SUBWOOFER PRE OUT jack connection ................................

22

Supplied accessories ..............................

3

SUPPORT AUDIO, HDMI setting ..... 77

Support audio, HDMI setting .............. 77

SUR. L/R SP, Speaker settings ............ 73

SUR.B L/R SP, Speaker settings ......... 73

SUR.BACK

PRE OUT jack connection ................................

22

Surround back left/right speakers,

Speaker seuings ...............................

73

Surround back sound field initial delay,

Sound field parameter ..................... 63

Surround back sound field liveness,

Sound field parameter ..................... 64

Surround back sound field room size,

Sound field parameter ..................... 64

Surround back speaker level,

Sound field parameter ..................... 66

Surround decode mode ........................

66

SURROUND DECODE,

Decoder category .............................

67

Surround left speaker level,

Sound field parameter ..................... 66

Surround leli/right speakers,

Speaker settings ...............................

73

SURROUND PRE OUT jack connection ................................

22

Surround right speaker level,

Sound field parameter ..................... 66

Surround sound field initial delay,

Sound field parameter ..................... 63

Surround sound field liveness,

Sound field parameter ..................... 64

Surround sound field room size,

Sound field parameter ..................... 64

• T

Test tone, Equalizer .............................

75

TEST, Equalizer ..................................

75

The Bottom Line,

Sound lield program ........................

43

The Roxy Theatre,

Sound lield program ........................

43

Tonal quality adjustment ..................... 48

TRANSMFI" indicator .........................

27

Troubleshooting ...................................

94 ol

109 En

l_._

Tuner indicators ...................................

26

Turning off ...........................................

25

Turning on ............................................

25

Turntable connection ...........................

21

TV Controlling, remote control ........... 86

TV monitor connection ........................

18

TYPE, Extended surround decoders ...... 77

• U

UNIT, Speaker distance .......................

75

Unit, Speaker distance .........................

75

Unprocessed input som'ces ................... 47

User presets, Advanced setup .............. 91

• V

V.RESET, Advanced setup .................. 93

VCR connection ...................................

20

VIDEO AUX jacks ..............................

23

VIDEO CONV., Display settings ........ 81

Video conversion, Display settings ..... 81

Video information ................................

41

VIDEO jacks ........................................

Video jacks ..........................................

Video parametcr reset,

15

15

Advanced setup ...............................

93

Video signal flow .................................

17

Video sources in the background ......... 40

Virtual CINEMA DSP .........................

46

VIRTUAL indicator.

............................

26

Volume level ........................................

30

VOLUME level indicator .................... 26

Volume °Dim, Input menu ................... 80

• W

WIRING, Auto setup parameter .......... 30

• X

XM ANTENNA, XM Radio setting ...... 84

XM Mini-Tuner Dock ..........................

53

XM Radio antenna,

XM Radio setting ............................

84

XM Radio setting, Option menu .......... 84

XM satellite radio activation ................ 54

XM Satellitc Radio display .................. 57

XM satellite radio tuning ..................... 53

• Y

YPAO indicator ................................... 26

• Z

Zone B .................................................. 38

110En

"@SPEAKER" or "@ DVD"

(exmnple) indicates the nmne of the parts on the Dont panel or the remote controh Refer to the attached sheet or the pages at the end of this manual lor the information about each position of the parts.

•

Front panel

•

Remote control

@

CLASSICAL LIVE/CLUB

OOO

ENTERTAIN MOVIE o[

STEREO_ EN_ERISTRAIGHT

NIGHT

PUREDINECT

List of remote control codes

CABLE TV RECEIVER

3M

A-MARK

ABC

10033

10{308, 10144

10237, 10003,

ACCUPtIASE

ACORN

ACTION

ACTIVE

AMERICAST

ARCtIER

10008, 10033

1{}{}03

10237

1{}237

1{}237

1!}899

10237

BCC 10276

BELL SOUTtI 1{}899

BRITISH TELECOM

CENTURY

10003

10008

DIRECTOR 1{}476

DX ANTENNA 115{}{}

FOSGATE

FUJITSU

10276

11497

GE 10144

GENERAL INSTRUMENT

113476, 10810,

1{}276, 1{}{}{}3

GIBRALTER

GOLDSTAR

1{}{}{13

10144

HITACHI 10003, 11}008,

INSIGItT

JERROLD

MACOM

MEMOREX

MITSUBIStII

MOTOROLA

1!}{}33

11}476, 11}8l{}

1!}476, 10810,

10276, 1{}{}03

10033

1{}000

1{}{}{}3

11376, 11}476,

10810, 1{}276

NEC 11496

NOVA VISION 11}1}1}8

NOVAPLEX

PACE

1{}{}08

11877, 1!}877,

PANASONIC

10237, 1!}008

1!301}0.113008,

10144, 1{}107.

11}375. 11488

PARAGON

PENNEY

11}525

1{}{}01}

PtIILIPS

PIONEER

11305, 11}317

11877. 1{}877,

1{1144, 10533,

11021, 1151}{},

11782

PULSAR

QUASAR

REGAL

1{3{300

1{}0t}0

1!}276

RUNCO 1{}0{}{}

SAMSUNG

1

10003. 1{}144

SCIENTIFIC ATLANTA

11877, 1{}877,

11}477, 10237.

SONY

SPRUCER

10003, 10{}00,

10008

11{}{}6,11460

1{}144

STARCOM 10003

SUMITOMO 11500, 115113

SUPERCABLE 1{1276

TORX

TOSHIBA

1{}{}{13

10{}00, 115!}9

UNITED CABLE

US ELECTRONICS

113276, 10003,

10008

V IDEOWT\Y

ZENITIt

10000

11}000, 10525,

10899

CABLE/PVR

COMBINATION

AMERICAST 10899

GENERAL INSTRUMENT

11}810

JERROLD

MOTOROLA

PACE

PIONEER

10810

11376. 1{}81{}

11877. 10237

11877, 1t}877

SCIENTIFIC ATLANTA

11877, 1{}877

S ON Y 111306

SUPERCABLE 1{}276

ZENITtI 10899

DBS/PVR

COMBINATION

DIRECTV 11377, 1{!392,

11}639, I1142,

11392, 11442,

11640

DISH NETWORK SYSTEM

DIStIPRO

ECIIOSTAR

EXPRESSVU

115t}5, 10775

115!}5, 11}775

11505, 10775

1t}775

HUGHES NETWORK SYSTEMS

1 1142, 11442

PIIILIPS

PROSCAN

11142, 11442

10392

RCA

SAMSUNG

SttARP

SONY

11392

11442

11489

10639, 11640

SATELLITE

RECEIVER

AIWT\

ALPttASTAR

AUSTAR

11514, 11515

10772

1{}879

BELL EXPRESSVU

10775

CtIAPARRAL

DIRECTV

1{}216

11377, 1{1392,

10566. 1{}639,

11639, 11142,

10247, 10749,

11749. 10724,

11}819. 11856,

11392, 11442,

11640

DISH NETWORK SYSTEM

115t}5, 11005,

10775, 11775

DISHPRO 11505, 110{}5.

10775, 11775

DX ANTENNA 11530

ECIIOSTAR 1151}5, 11{}{}5,

10775, 11775

ESAT

EXPRESSVU

FOXTEL

PUNAI

GE

GOI

10879

11}775, 11775

1{}879. 11356

11377

10392, 1!}566

11}775, 11775

HITACHI 10749, 1!}819,

1{}214, 11251},

11518, 11523,

11525

10775 HOUSTON

HTS 10775. 11775

ItUGItES NETWORK SYSTEMS

JVC

LG

11142, 11}749,

11749, 11442

10775, 113492,

11507, 11531,

11532, 11775

11226

MAGNAVOX

MASPRO

10724, 1!}722

11520, 11530

MATSUSItITA 1{}214

MEMOREX 10724

MITSUBIStII

MOTOROLA

10749

1{}856

NEC

OPTIMUS

PACE

PANASAT

PANASONIC

1{}496, 11270,

11519

10724

11356

PAYSAT

1!}879

10247, 1!}7t}1,

1!}214, 11508.

11526. 11527,

11528

10724

PHILIPS 11142, 1!}749,

11749, 1!}775,

10724, 10819,

11!722, 11442

11142, 11442 PIONEER

PROSCAN 1!}392, 10566

RADIOStIACK 10566, 10775

RCA 10392, 10566,

11142, 10775,

SAMSUNG

SANYO

SItARP

1!}855, 1!}143,

11392. 11442

11377. 11142,

11276, 11442

11219

SKY

SONY

1!}494, 11489,

11513, 11517

10856

1!}639, 11639,

10163, 10275,

10294, 11524,

11640

STAR TRAK

TttOMSON

TIVO

TOSHIBA

10772

10392, 10566

11142, 11442

10749, 11749,

1!}790, 1!}819,

1!}486, 11285,

11501, 11516,

11530

11356 UEC

ULTIMATETV 11392. 11640

UNIDEN

ZENITtI

1!}724, 10722

1{}856, 11856

TV

A MARK

ACCUSCAN

ACTION

ADMIRAL

ADVENT

20{}47, 20054,

20160

20047

2{}030

20017, 20047,

2{}{}51,213054,

20093, 20179,

2018t}. 2t}264,

20463

20761, 20783.

20815,20817,

20842

ADVENTURI

AGNA

AIKO

AIWA

AKAI

ALARON

ALBA

ALBATRON

ALFIDE

ALLERON

AMBASSADOR

20150

AMERICA ACTION

20180

AMERICAN ttIGtt

20000

20150

20092

21180

20030, 201}60.

21}145, 20672,

2{}702, 2{}812

20171}, 20179

2{}037

20700, 20843

20672

20030. 20170

AMSTRAD 20171

AMTRON

ANAM

20000, 20180

2t}180

ANAM NATIONAL

20161

AOC 20030. 20180

APEX DIGITAL20156, 20748,

AUDINAC

20765, 20767,

20879

20180

AUDI(JVOX 2t}092, 20179,

2018t}, 2t}451,

2{3623, 2{}802,

20875

AVENTURA

BAYCREST

BAYSONIC

2t}171

2t}186

20180

BEAUMARK

BELCOR

BELL & HOWELL

201}17, 20030,

20178, 20179

20{}3{}

BEN Q

BRADFORD

BROCKWOOD 20{}30, 21}178

BROKSONIC 20180, 20236,

2t}463

BROTttER 20264

BYD:SIGN

2{}{}54.2{}{}93,

20154, 2{}179

21 {}32

20180

CANDLE

CAPEHART

CARNIVALE

2131}9, 21311,

21485, 21486

2{}030. 20186

201}17. 2{}{}30,

2{}{}36,2{}{}92,

20178

20030

iii

CARVER

CCE

CELEBRITY

CELERA

CHANGHONG

CINERAL

CITEK

CITIZEN

CLARION

CLASSIC

COLORTYME

COMMERCIAL

CONIC

CONTEC

CRAIG

CROSLEY

CROWN

CROWN

CURTIS

20047, 21447

211178

20180

20161, 20171,

20179.

20180

211000, 201130,

21tlt54, 20171,

20180

20093,211180,

20672

MUSTANG

211672

MATtiES

21347.

21147,

20702, 20451,

20180, 20179,

20178, 20166,

20154.

20145,

20093, 20060,

20054.

2(}051.

CXC

DAEWOO

DAYTON

DAYTRON

DELL

DENON

DUMONT

DURABRAND

DWIN

EATON

ELECTROBAND

21X154, 20170

20037

201100

20765

20156.

20765,

20767, 20783

20092.

211451

20047

2tJ{X)0, 201)31).

201)54, 2(3060,

20092, 20171.

20180, 20186,

2(M51, 21M63

20180

20030.

20092

20017.

20030,

20047, 20054,

20060.

211178

SOLUTIONS

20047, 20037,

20030, 20000

20180

21X)36, 20092,

20178, 20264.

20451, 20623,

20661, 20672.

21661, 21755,

21756

20092

20030, 20036,

20092, 211178

21178

20145.

20511

2(}(117, 21)178.

201811

20171, 20178,

20180.

20463,

21034

2(3093

20060

20000

ELECTROGRAP}t

21755

ELECTROItOME

EMERALD

20000.

21X)30,

20150, 211154,

20178

20178

EMERSON

ENVISION

ESA

FISHER

FORTRESS

FUJITSU

20036, 20047,

20150. 20154,

20170, 20171,

20178, 20179,

20180, 20236,

21t451, 211463,

20623

20030

20171, 20812

20000, 2(t(t54,

20154

20093

20179,20186,

20683, 20809,

20853,21181,

21607

FUJITSU GENERAL

20186

FUNAI 200110, 20171,

20179, 20180,

20264, 211342

FUTURETECH

GATEW?\Y

GE

20180

21755.21756

20000, 20030,

20047, 20051,

20060, 20178.

GEMINI

GENERAL

GIBRALTER

GOLDSTAR

GOODMANS

GPX

GRADIENTE

GRAN PRIX

GRANADA

GRUNDIG

20451, 21147.

21347. 21447

20047

20186

20000, 20017,

201130

20030. 20036.

20037, 20047,

20054, 20178,

21378

20037

20179

20053, 201711

20179

201)37

20037, 20672,

20683. 20706

GRUNDY

GRUNPY

HAIER

20179, 20180

20179, 20180

21034

HALLMARK 20178, 20179,

20180, 20236

HARLEY DAVIDSON

20000, 20030,

20060, 20178,

211179, 20180

HARMAN/KARDON

ItARVARD

20054

20180

}tAVERMY

HEATIIKIT

20093

20017

HELIOS 20865 ttELLO KITTY 20451

ItlSENSE

HITACHI

20748

20000. 20017.

201)36, 2(3047,

HYUNDAI

ICE

IM A

INFINITY

INNOVA

INSIGNIA

20051, 20054,

20145, 20178,

20179, 21145,

21150, 21245,

21378

20849, 20865

20264

20178, 20179,

20180. 2(t236

20054

20037

211171

INTEQ

JBL

JCB

JENSEN

JIL

JINXING

JUTAN

JVC

KAMP

KAW?\SttO

KEC

KENWOOD

KLH

KLOSS

KONKA

KTV

LARK

LG

LLOYD'S

LOGIK

LUMATRON

LXI

MACY

MAGNASONIC

MAGNAVOX

2(X300, 201)30,

201154, 2IJ{N2,

20093, 20156,

20179

21755,21454,

21254. 20802,

20706, 20250,

20186, 20180,

20179, 20171,

20154, 2(,'(02,

20060, 20054,

20051. 20047.

20037. 2(3036.

20030, 20000

20017 MAJESTIC

MARANTZ

MARK

201)30, 20037,

20054, 20704,

21454

20037

MATSUI 20036, 20037

MATSUSHITA 20051. 20161,

20250, 20650

MAXENT 21755.21756

MEGAPOWER 20700

MEGATRON 20047, 20145,

20178

MEMOREX 21t030, 20037.

201511, 20154,

20178. 20179,

20180, 20463

20017, 20145

20054

20000

20761. 20815,

20817

20030

20037

201)30

20030, 20036,

21tlt53, 20054,

20160, 20653,

20731, 21172,

21253. 21428

20017, 20180

20030

20060. 20180

2(3030, 20180

20156, 20180.

20?65, 20?67

20030

20180

20030, 20180,

20463

20154

201)31).20054,

20060, 20178.

20442, 20700,

20856, 21178,

21265. 21378

20030, 20179,

20180, 20236

20179, 211180,

20236

20037, 20264

20179, 20178,

20171, 20166,

20156, 20154,

20093, 20060,

20054, 20053,

201)51,201M7,

20037, 20036,

20030. 2(,'(317,

2001111

20186

MERMAID 21X)37

MGA 20030, 20150,

20178

MGN TECHNOLOGY

MICRO GENIUS

20178

20150

MIDLAND

MINATO

MITSUBISHI

20017, 21!1t47,

2(X}51

20037

20030, 20036.

MONIVISION

MOTOROLA

MTC

MULTITECtl

NAD

NEC

NETT V

NIKKO

20093, 20150.

20154, 20160,

20178, 20250,

20836, 21150,

21171,21182,

21250, 21522

20700, 20843

20051, 20054.

20093, 20150

20030, 20060,

20092, 201811

20179, 20180

20156, 20166,

20178, 20866

20030. 21D36,

20047, 20156,

20170, 20178,

204?4, 20?04,

21182. 21456,

21704

21755

NIKKODO

NIStII

NORCENT

NTC

NYON

ONW?\

OPTIMUS

OPTONICA

OR ION

2(3030, 21tlt92,

20178

20030, 2111392,

20178

201)30

20748, 20824

20092

200(3(}

20180

20030, 20093,

20150, 20154,

20166, 20178,

20180, 20250,

20650

20093

PACE

PACIFIC

PALSONIC

PANASONIC

20017, 20178.

20179. 20180,

20236, 211463,

21463

20092

20037

20264

20000, 201)30,

201)51, 20054,

20156. 20161,

20236, 20250,

20650, 21168.

PANDA

PAU SA

PAXONIC

PCE

PENNEY

PtlILCO

21175,21177

20706

20179

20030, 20060

20060, 20156,

20179

20000, 20030.

20036. 20037,

20047, 20051.

20060, 20156,

20161, 20178.

20250, 21347,

21378

20030, 20054,

20145, 20179,

20186, 211463 iv

PttILIPS

PILOT

20030, 20037,

20054, 20171,

20186, 20690,

21254, 21454,

21455

20030, 20051,

20060, 20178

PIONEER

POLAROID

PORTLAND

PRECISION

PRIMA

20166, 20679,

20866, 21260

20765, 20865

20092, 20451

20180, 20236

20761, 20783.

20815,20817

20700 PRINCETON

PRISM

PROSCAN

PROTEC

PROTON

PROVISION

PULSAR

PULSER

QUARTZ

QUASAR

20051. 20250

2{}{)47,21347,

21447

20037. 20264

20178

20037

211017. 20092

20092, 20178

R LINE

RABBIT

RCA

20150, 20178

2{}{}51,20250,

20650

20037

20047

RADIOSIIACK 20030, 20047,

20150, 20154,

20178, 20180

20000, 20047,

20051, 20054,

2{D90, 21X193,

20178. 20679.

REALISTIC

REVOX

RU NCO

SAMPO

SAMSUNG

21047,21147.

21247, 21347,

21447, 21547

20030. 20047,

20150, 20154,

20178, 20180

20037

20017, 20030,

20060

20030. 20047,

21755. 21756

20017, 20030.

20036, 20037,

20047. 20054,

2{D60. 20154,

20178. 20264,

SANKY

SANSUI

SANYO

SAVILLE

SCOTCIt

20587. 20702,

20766, 20812.

20814, 21060

20030, 20060

20030, 20060.

20463

20000. 20036.

20037. 20047,

20054, 20088,

20154. 20171,

20376, 20424,

20463, 21179,

21755

20060

20178

SCOTT 20030, 20178,

20179, 20180,

20236

SEARS 20179, 20178,

20171, 20166,

20156, 20154,

20093, 20060,

20054, 21J053.

20051. 20047,

20037, 20036.

SHARP

20180, 20256,

20787, 21165

StIENG CILIA 2111N3

SttIVAKI

SIEMENS

20037, 20178

20145

SIGNATURE

20030, 20017.

20000

20036, 21D54,

20093, 20179,

SIMPSON

20030, 20047,

20093, 20179

20030, 20178,

20186

SINGER

SKY NORTIt

SOLAR DRAPE

20060, 20092

20037

20000

SONY 20000, 20017.

20036, 20053,

20150, 20154.

21100, 21167,

21300, 21651

SOUNDESIGN

20178, 20179,

SPECTRAVISION

20180, 20186

20156, 20178,

20179. 20186

SQUAREVIEW

SR2000

SSS

STARLITE

20171

20154, 20171

20180

20180. 20236

STUDIO EXPERIENCE

20843

SUPERSCAN 2{}{){)3,20864

SUPRE MACY 20186

SUPREME

SV20{X)

SVA

20000

21X154

20587, 20748,

SYLVANIA

20865, 20870,

20871

20000, 20030.

21X136.20037,

20047, 20051,

20054, 20092,

20154, 20171,

20178, 211179,

20186

SYMPttONIC

TANDY

TATUNG

20000,20171,

20178, 211179,

20180

20093

20000, 20037,

20051.21756

2{N37, 20154, TEAC

TECItNICS

20264, 20706

20051. 20054,

20250

TECHNOL ACE

20179

TECttNOVOX

TECHWOOD

20030

20051, 20060,

20250

TEKNIKA 2{}{}54.20060,

20092, 20150,

20178, 20179.

20180, 20186,

20463

20017 TELECOLOR

TELEFUNKEN

TELETON

TEVION

TttOMAS

TIIOMSON

TMK

TNCI

TOCOM

TOSHIBA

20702

20186

20037

20047. 20178

20047, 21447

20178, 211180,

20236

20017

20156

21704. 21656,

21456, 21356,

21265, 21256.

21173, 21169,

21156,21145,

20845, 20650,

20509, 20264.

TOTEVISION

20166, 20156,

20154, 20150,

211145, 20060,

20036

20051

TOYOMEN KA 211178

TRUETONE

TVS

ULTRA

21J051, 20250

20463

20092

UNIVERSAL

UNIVERSUM

21X147

20036. 20037,

20170, 20264.

20474

V 20864, 20885,

21755, 21756

VECTOR RESEARCtt

20030

VICTOR

VIDIKRON

VIDTECtt

VIEWSONIC

20036, 20053,

211160, 211653

211054

20036. 20178

VIKING

VISIO

20857, 20864,

20885, 21755

20060

VIZIO

2{}864, 20885,

21755, 21756

20864, 2{}885.

21756

WT\RDS 20000, 20017.

20030. 20037,

20047, 20051,

21D54, 201D3,

20154, 20166,

20178, 20179,

20186, 211236,

20866, 21156

20156 WT\YCON

WELTON

WESTINGttOUSE

2{}178

20000, 20451,

20885, 20889

WItITE WESTINGttOUSE

20179, 20236,

20451, 20463,

WORLD

20623, 20889

20180, 20236,

20451, 20463

XR 1000

YAMAttA

YORX

ZENITtI

20154, 20171,

20179, 20180

20030, 20650,

20769, 21405.

21406, 21407,

21522

20030

20000, 20017,

20030. 2{}{}37,

2{}{}47,20{}92,

2{}{}93,211145,

20160, 20171,

20178, 2{}463,

211812, 21145,

21265

PVR

ABS

ALIENWT\RE

CYBERPOWER

31972

31972

DELL

DIRECTV

31972

31972

30739

GATEVT\Y 31972

HEWLETT PACKARD tIITACIII

31972

31718

ItOWT\RD COMPUTERS

31972

HP 31972

ItUGItES NETWORK SYSTEMS

HUMAX

HUStt

IBUYPOWER

3{}739

30739

31972

31972

JVC

LINKSYS

31279

31972

MEDIA CENTER PC

31972

MICROSOFT

MIND

31972

31972

MITSUBIStII

NIVEUS MEDIA

31714

NORTItGATE

PANASONIC

PttILIPS

PIONEER

RCA

REPLAYTV

SAMSUNG

31972

31972

30616,31244.

31732, 31807,

31808, 31809

30618, 30739

31803

30880

30614, 30616

30739

SttARP 31742, 31810

SONIC BLUE 30614, 30616

SONY 30636, 31447,

STACK 9

31448, 31636,

31972

31972

SYSTEMAX 31972

TAGAR SYSTEMS

31972

TIV()

TOSHIBA

30618, 30636,

30739

30828, 31008,

31739. 31972,

TOUCtt

VICTOR

VIEWSONIC

VOODOO

ZT GROUP

31996

31972

31706

31972

31972

31972

VCR

A MARK

ABS

ADMIRAL

ADVENTURA

30037.

31t240,

30000

31972

3t}{)60, 30048.

30039, 30047,

30104, 30209

30037, 30240,

30000

30037.

30000, AIVT\

AKAI

ALBA

ALIENWT\RE

ALLEGRO

AMERICAN

3{}3{}7, 30348,

31284, 31291,

31332, 31336

3{}{}4l

3{}2{}9

31')72

30039 tIIGIt

AMSTRAD

ANAM NATIONAL

30035, 30081

30000

ASIIA

3{}226

3{}240

ASTRA

AUDIOVOX

AVIS

BEAUMARK

BELL & ItOWELL

3t}{}35, 3{}{}48,

3{}{}39, 30000,

301{}4

BROKSONIC

30035, 30240

30037.

30038

3{}{}{}0

3024{}

CALIX

CANDLE

CANON

CARRERA

CARVER

CITIZEN

30184, 30121.

30209, 30348,

31479

3{}{}37

3{}{}37, 3{}{}38

30035, 3t}034

30240

CLASSIC

COLORTYME

COLT

CRAIG

30035, 30081

3{}{}35, 30{}37,

30240, 30000,

30209, 31278

3{}{}37

3{}{}60, 3{}{}35,

3{}{}45

30000

CRITERION

CROSLEY

3{}{}37. 3{}{}47,

3{}24{}

3{}{}{}{}

31}{}35, 31}{}81,

30001}

CURTIS MATIIES

CYBERNEX

CYBERPOWER

3{}{}6{},3t}{}35,

30162, 30240,

3{}{}{}{},3{}{}4l,

311}35

30240

DAEWOO

DAYTRON

DELL

DENON

DERWENT

DIRECTV

DUAL

DURABRAND

DYNATECH

ELECTROHOME

31972

30037, 30045,

31278

30037

31972

30081, 30042

30041

3{}739

3000{}

30039.

3{}{}38

3{}240, 3{}{}{}{}

30060, 30037,

3{}240, 30{}{}0,

3{}{}43, 302{}9

ELECTROPHONIC

EMERALD

EMEREX

EMERSON

FISHER

FUJI

FUJITSU

FUNAI

GARRARD

GATEWT\Y

GE

GEMINI

GENERAL

GENEXXA

GO VIDE()

GOLDSTAR

30037

30184, 30121

3(}032

30037.

313184,

30240, 30000,

3{} 12 l, 30{}43,

3{}209, 30348,

31278.

31479

30{}39.

3{}{}47.

30000, 30104

3{}035, 30{}33

30{}45.

3001}{}

30{}37, 30000,

31333

30{}{}{}

31972

30060, 30035.

3{}{}48, 3024{},

3001}{}, 30807,

311}35,311}60

30060

3{}{}45

3{}037.

30{}{}{}

3{}240, 30614

30035, 30037.

30039, 30000,

3{}{}38. 31237

GOODMANS 30{}37.

31}{}81,

31}{}1}{}

3{}{}{}{} GRADIENTE

GRANADA

GRUNDIG

HARLEY

3{}08 l, 30t}42

3{}08 I. 3{}034,

30226

DAVIDSON

31}{}00

ItARMAN/KARDON tIEWLETT

31}{)81, 3{}{}38

PACKARD

31972 ttI Q

HITACHI

ItOWT\RD

HP

HUGHES

ItUMAX

HUSH

HYTEK

IBUYPOWER

ITT NOKIA

JANEIL

JENSEN

JVC

KEC

KENWOOD

30035, 3{}{}47,

30000

30035, 30037,

30045, 30{}{}0,

30042, 30041.

30166.

31286,

31326,31718

COMPUTERS

31972

31972

NETWORK SYSTEMS

3!}042, 30739

3{}739

31972

30{)47, 30{}{X)

31972

30240, 30041

3024{}

30067, 30041

3{}{)67, 30{}41,

31279, 31299,

31329

30{}37

KODAK

KTV

LG

LIFETEC

LINKSYS

LLOYD'S

LOEWE

LOGIK

3t}067, 3{}{}41,

30038

3{}{}35.3{}037

30000

3{}037, 3024{},

3{}{}38

30348

31972

3024{}, 3t}000,

3{}{}38

3{}081

3024{}, 3{}{}{}{}

LXI 30037, 30000.

30042, 30067

M ELECTRONIC

3{}240

MAGNASONIC

MAGNAVOX

3{}{}37, 3024{}.

3{}{}{}{},31278

3{}{}35.3{}{}37,

3{}{}48, 30039,

30081, 30240,

30{}{}0, 30226,

MAGNIN

MARANTZ

MARTA

MATSUI

3{}618, 31781

3{}24{}

3{}{}35, 31}081,

3{}{}38, 31381

3{}{}37

3{}{}37, 302{}9,

30348

3{}{}35, 30162, MATSUSItITA

MEDIA

MEDION

MEI

MEMOREX

CENTER

30081, 30226

PC

31 ')72

30348

3{}{}35

301}35, 30162.

3{}{}37, 3{}{}48.

3{}{}39, 3{}{}47,

3{}240,30{}{}0,

30104.

302t}9,

303{}7.

3{}348,

31237

3{}{}37 METZ

MGA 30060, 30240,

30{}43

MGN TECftNOLOGY

MICROSOFT

MIDLAND

MIND

MINOLTA

MITSUBISttI

OPTIMUS

3{}240

31972

3{}240

31972

3{}{}42

30{}60.

30048,

30{}47, 30000.

3t}{}42, 3{}{}67,

3{}{}43, 30{}4 l,

308{}7, 31343.

31714

30035, 3!}{}48 MOTOROLA

MTC

MTX

MULTITECH

NAD

30240, 3{}{}{}{}

30000

3t}{}39. 30t}{}0

30240, 3011}4

NEC

NIKKO

NIKKODO

NIKON

NISttI

NIVEUS MEDIA

301{}4, 30{}67,

30041, 30038

3{}{}37

3{}{}37

3{}{}34

3024{}

31')72

NOBLEX

NORTtIGATE

OLYMPUS

3024{}

31972

3{}{}35, 31}162,

30104, 30226

31062, 30035,

30162, 30{}37.

3{}{}48, 3{}{}47.

30240, 3{}{}{}{},

31}11}4

ORION

PANAMA

30184, 30240,

3{}{}01},30104.

30121, 302{}9,

31479

30035

PANASONIC

PENNEY

PENTAX

PItILCO

PHILIPS

PILOT

PIONEER

POLK AUDIO

PROFITRONIC

PROSCAN

PROTEC

PULSAR

PULSER

QUARTZ

QUASAR

RADIOSHACK

31062, 31}{}35.

30162, 30000,

3{}225, 30226,

30614, 30616,

31035, 31244,

31292, 313{}8.

31732, 31807,

31808,31809

31}{}35, 30162.

3{}{}37, 3{}{}47,

3008 l, 30240,

3{}{}{}0.30{}42,

3{}{}67, 3t}{}38.

31035, 31237

3{}{}42

3{}{}35. 30081,

31}{}{}{},302{}9

3{}{}35,30162,

3{}{}48, 30081,

3{}{}45, 30{}00.

30209, 3t}{}34,

30616, 3{}618,

3{}739.

31381

3{}{}37

30162, 31}{}81.

3t}1!42, 3{}{}67,

318{}3

30081

3024{}

3{}{}60. 311}61}

3{}{}{}{}

3{}{}39, 30240

30240

3{}{}35, 3{}{}47

3{}{}35, 30162,

30226, 311}35

RADIX

RANDEX

RCA

REALISTIC

REPLAYTV

RICAVISION

RICOtt

RUNCO

SAMSUNG

SAMTRON

SANKY

SANSUI

SANYO

SCOTT

3{}{}35. 30162,

3{}{}37. 3{}{}48,

30047, 30240.

30000, 30104

3{}{}37

3{}{}37

30{}60, 30035.

3{}{148, 30240,

30045, 300{}0,

3{}{}42. 30166,

30807, 30880,

311}35,311}60

31}{}35, 30162,

3!}{}37. 30048,

30047, 30240,

3{}{}{}{},30104,

30121

31}614, 30616

31972

3{}{}34

30{}39

3{}{}60, 30241}.

30045, 30001},

31}{)38, 30739,

31014

3024{t

30048, 30039

3{}240.

30000,

31}{}67, 3{}2{}9.

3{}{}4I. 31479

30047, 30240,

3t}{}00, 30104,

31330.

31331

30184, 30045,

30121,30043

vi

SEARS

SHARP

SHINTOM

StIOGUN

SIEMENS

SIGNATURE

SINGER

SONIC

SONY

BLUE

30037, 30104

30060.

30035,

3(}037, 30048,

30000

311037, 30240

30614, 30616

3!11}35, 30047,

30032.

30033.

300110, 3111167,

3{}{}34, 30226,

3{}636, 31232.

31295.

31296,

31447, 31448,

31636, 31972

SOUNDMASTER

STACK 9

STS

SV2000

SVA

SYLVANIA

30(}00

31972

311042

30(}1X}

30000

SYMPItONIC

SYSTEMAX

TAGAR SYSTEMS

30240, 30000

31972

31972

TANDY

TATUNG

30035, 30081,

3t1{}ttlt, 30043,

31781

3!}000, 3011}4

30048.

30081,

300110, 3ttlt67,

30041

30060, 30035,

30162, 30037,

30048.

30039,

30047, 30033,

30t)45,300!11t,

3t!{}42, 3!}11}4,

30067, 30043,

30209, 30041,

30034, 31237

30048, 30047.

30032.

30000,

3t}81t7, 31285,

31742, 31810

3t11}39, 30240,

30000

30240

TEAC

TECHNICS

TMK

TNIX

TOCOM

TOSHIBA

30000, 30067,

30041

30035.3t}162.

3t11}37, 30000

TEKNIKA 3{}{}35. 30037,

31}{}t}{}

3{}240 TELECORDER

TELEFUN

TttOMAS

KEN 30{}4 l

3{}{}{}{}

TIIOMSON

TWO

30060, 30041

30618, 30636,

30739, 31996

3!}240, 30000

3{}037

30240

30240.

30045,

30000, 30042,

3{}{}43, 30209,

3{}{}4l, 30828,

30845, 31008,

TOTEVISION

TOUCH

TRIX

ULTRA

UNITECH

31145,31323,

31739, 31972,

31996

31}!}37, 3024{}

31972

3{}{}37

3{}{}45

3024{}

VECTOR 30045

VECTOR RESEARCtt

30184, 30038

VICTOR 30067, 30041,

31299,31706

VIDE() CONCEPTS

30045

VIDEOMAGIC 3{}{}37

VIDEOSONIC 3{}240, 3{}{}{}{}

VIEWSONIC 31972

VILLAIN

VOODOO

3{}{}{}{}

31972

WT\RDS 30060. 3t}{}35,

3{}{}37,3{}{}48,

30047, 30081,

30033, 30240,

30045, 311001},

3{}{}42,30{}43,

3{}{}4l, 3{}{}38

WItITE WESTINGItOUSE

30000, 30209

WORLD 3{}209

XR 1000 30{}35.3{}24{},

3t}{}{}{}

YAMAHA

ZENITH

ZT GROUP

3004 l, 3{}{}38

3{}{}37,3{}039.

3{}{}33,3000{},

302{}9, 3004 l,

3t}{}34,31479

31972

DVD PLAYER

3D LAB

ACCURIAN

ADVENT

A I_¥T\

AKAI

40503, 40539

41416

41016

40641

40695, 40705,

4077{}, 4{}899

ALBA

ALCO

ALLEGRO

40672, 40717

40790

40869

AMPHION MEDIA WORKS

4(}872

AMW

APEX DIGITAL

40872

4t}533.4t}672,

40717, 40755,

4(}794, 4(}796.

40797.4t}83t},

411104. 41020,

41{}56,41061,

41101}

41023 ARRGO

ASPIRE DIGITAL

41168

AUDIOVOX 40717.4{}79{}

BEL CANT() DESIGN

BLAUPUNKT

41571

40717

BLUE PARADE40571

BLUE SKY 40695

BRANDT

BROKSONIC

40651

40695

BYD:SIGN 40872

CALIFORNIA AUDIO LABS

CELESTIAL

40490

41020

CENTREX

CINEA

CINEVISION

40672, 411}04

40831

40876, 4t}869

CITIZEN

CLAIRTONE

COBY

4101}3, 41277

40571

40778, 411}86,

41107

CRAIG 40831

CREATIVE 405t}3, 40539

CURTIS MATIIES

41087

CYBERHOME 40816, 4{}874,

41023, 41024,

41117.41129

CYTRON

DAEWOO

DANSAI

407115

40784, 40705,

40770, 40869,

41169,41172

4077{}

DAYTEK

DECCA

DENON

40872

4t}77!}

40490, 40634.

DENVER

DIGITREX

DISNEY

DIVIDO

41282,41634

40778

40672

40675, 41270

407t}5

DUAL 40675

DURABRAND 41127

DVD2000

ELECTROItOME

40521

41003

EMERSON 4059 l, 4{}675,

40821,41268

ENTERPRISE 40591

ENTIVO

ENZER

ESA

FIRSTLINE

FISHER

FUNAI

GATEWT\Y

GE

GO VIDE()

4{}5{}3.40539

4{}77{}

4082 l, 41268

4{}65l

40670

40675, 41268

41158

40522. 40815,

40717

40573, 40744,

40717, 40741,

40783. 40869,

41044, 41075,

41!}99.41158,

413t}4,41730

GOLDSTAR

GOODMANS

GRADIENTE

GREENItILL

40741,40801.

40869

4079{}

40490.40651

4t}717

GRUNDIG 40539, 40705

HARMAN/KARDON

40582, 40702 tIITACItI tIITEKER

I O DATA

40573. 40664,

41247,41664,

41764

40672

41405

ILO

INITIAL

INSIGNIA

INTEGRA

IRT

JBL

JENSEN

JMB

JVC

41348

40717

41268

40571. 4062T

41634

40783

40702

41/}16

40695

4t}558. 40623,

40867, 41164,

41241,41275,

41590,41592,

41594

40790 KAWT\SA KI

KENWOOD

KLtI

KLOSS

4t}49{},40534

40717, 40790,

41/}20, 41149

4{}533

KOSS

LASONIC

LECSON

LENOXX

LG

LITEON

40651,41061

40627, 40798

41533

41127

40591,40741,

40801,40869,

41600

411}58, 41158,

41416,41440

40741

4{}783

LOEWE

LOGIX

MAGNASONIC

MAGNAVOX

MARANTZ

MCINTOSH

MEDION

MEMOREX

MICROSOFT

MINATO

MINTEK

MITSUBISHI

NAD

NAIKO

NEC

NESA

NEXXTECIt

NORCENT

ONKYO

OPTIMUS

ORION

ORITRON

PALSONIC

PANASONIC

PHILIPS

PIANODISC

PIONEER

POLAROID

POLK AUDIO 4t}539

PORTLAND 40770

PRESIDIAN

PRIMA

40675

41/}16

PROCEED

PROSCAN

PROVISION

40672

40522

4t}778

405 71,40703,

41{}1{},41{}11,

41282,41362,

41462, 41491},

41632,41641.

41762

405t}3, 40539,

40646. 40675,

40854, 41260.

41267,41354

41024

40525, 40571,

40631,40638,

41475, 41476.

41571

41020. 41061,

41{}86

QWESTAR 40651

RADIONETTE 4{}741

RADIOSHACK

4{}571

RCA 40522, 40571,

40717, 40790,

40822.41

{}22,

41132

4{}651,4{}675

405{}3.4{}539,

4{}646, 4{}675,

40821. 41268

405{}3, 4{}539.

40675, 41627

41533

40651

40695, 40831,

41270

40522,41708

40752

40839, 40717

41521,40521,

41403, 41629

40591,41t741

40770

40785, 40869,

41404

40717

41402

41 !11}3.40872,

41107

40503, 40627,

40792. 41612,

41627

40571

41695

40651

40672

40503, 40490,

vii

REALISTIC

RE(K'

RIO

ROTEL

ROW?\

SABA

SAMPO

SAMSUNG

SANSUI

SANYO

SCttNEIDER

SCttW?\IGER

SENSORY

SItARP

SHARPER

SttERWOOD

SttINSONIC

SLIM ART

SONIC BLUE

SONY

SUPERSCAN

SVA

SYLVANIA

40752

SCIENCE

41158

40630, 40675,

40752, 41256,

41556, 41642,

42002

IMAGE

41117

407711

40533, 40839

40784

40573.

40783,

40869, 41099

4{}533, 41533,

40864, 40772,

41033.

41069,

41070, 41431,

41633

4{}821

40717

SYMPHONIC

TATUNG

TEAC

40571

40752

40869

40623

411104

40651

40752

404911, 40573,

40744, 40820,

41)899, 411!44,

41075, 41599

40695.

41695

40670, 40675,

40695.

41583

40783

40675,40821,

41268

40675,40821,

41268

40770

40571,4{}717,

40790

TECItNICS

TECttNIKA

TEVION

THETA DIGITAL

40490, 40703

40770

40651

40571

TttOMSON

TOSHIBA

40522

40503, 40573,

40539, 40695.

UNIMAX

UNIVERSUM

41045,41154,

41510, 41595,

41639

40770

40591

URBAN

US LOGIC

VENTURER

CONCEPTS

40503, 40539

40839

40790

VICTOR

WYSE

XBOX

YAMAttA

YAMA

ZENITH

ZEUS

KAWg\

41241,41597

41652

40522, 417(18

40490, 40539,

40545.41282,

42000, 42001

40872

40503, 40591,

40741.

40869

40784

LD PLAYER

AD¥?\

CARVER

DENON

40203

40064

40059, 40172,

40241

DISC() VISION

FUNAI ttlTACttI

KENWOOD

MAGNAVOX

MARANTZ

MITSUBISttI

NAD

OPTIMUS

PANASONIC

PttILIPS

PIONEER

QUASAR

REALISTIC

SEGA

SttARP

SONY

TECttNICS

TOSttIBA

VICTOR

W?\RDS

YAMAItA

40023

40203

40023

40236, 40258

40064,40217,

40241

40064

40059,40241

40059

40059

40204

40064

40059, 40023,

4(}241

40204

40203

40023

401}01

40193.

402(11

40204

40059

40245

40059

40217

DVD RECORDER

ACCURIAN

APEX DIGITAL

ItITACttI

JVC

LG

LITEON

MAGNAVOX

MITSUBIStII

51416

ASPIRE

COBY

CYBERttOME

DENON

EMERSON

FUNAI

G ATE _¥?\Y

GO VIDE()

DIGITAL

51056

51168

51086

51129

50490

50675

50675

51158

50741, 51158.

51304, 51730

51664,

51164,51275

50741

51158,

51440

51764

51416,

50646, 50675

51629

PANASONIC

PItILIPS

PIONEER

POLAROID

RCA

SAMSUNG

SENSORY

SttARP

50490,51010,

51011

50646

50631,51475,

51476

51086

50522

50490

SCIENCE

51158

50630, 50675,

51556, 51642,

52002

SONY

SYLVANIA

TOSHIBA

VICTOR

YAMAttA

ZENITIt

51033, 51069,

51070, 51431

50675

51510, 51639

51275

52001

50741

CD PLAYER

A D('

ADCOM

AI_¥T\

AKAI

60018

60234

60157

60083, 60643,

61688

60625 ALBA

ANAM

ARCAM

AUDIO

NATIONAL

60362

60157

RESEARCIt

CAIRN

CALIFORNIA

CAMBRIDGE

60157

60157

AUDIO LABS

60029, 60303

SOUNDWORKS

60157

60157 CARVER

CCE

CLASSIC'

CURTIS MATHES

60643

61297

60032

DENON 60873, 60626,

60003.

60034,

60766

DKK 6000{1

DMX ELECTRONICS

FISttER

GEMINI

GENEXXA

60157

60000,

60625

60032

GOLDSTAR

GPX

612{}8

61296

GRUNDIG tIARMAN/KARDON

60157

61325

HITACHI

IN KEL

INTEGRA

JERROLD

JVC

60100, 60157,

60083, 61202

60032

60157, 60180

60101

60003

60032, 611072.

61294

KENWOOD

KOSS

KRELL

KYOCERA

LG

LINN

LUXMAN

MAGNAVOX

MARANTZ

60681, 60826,

60626, 60000.

6{}{}29, 60028,

6019{}.

61683

61317

60157

6{}{118

61208

60157

60328, 60489

60157, 6{}038,

60274

60626.

60{}29,

60157, 6{}038,

60180.

6{1373,

6{}435

MATSUI

MCS

MEMOREX

MGA

MICROMEGA

MIRO

MISSION

MITSUBISttI

MODULAIRE

60157

6{}{}29, 60043

6{}{}{}{},60032,

6{}468

60083

60157

60000

60157

6{}{}83. 60808

60000, 60032,

60087, 60180,

60468

MTC

NAKAMICHI

NEC

NIKKO

NSM

ONKYO

OPTIMUS

PANASONIC

PENNEY

PttILIPS

PIONEER

POLK

PROTON

QED

QUAD

QUASAR

AUDIO

RADIOSHACK

611163.

61062.

6{}{}32, 61{187,

6{}468

60157

6{}157

60157

60157

6{}{}29

600{}0, 6{}{}32,

60180, 6{}468

61{162, 6{}{}32.

RCA

REALISTIC

60053, 60468

6{}{}00. 6{}{}32,

60087, 60180,

60468

6{}157 REVOX

ROKSAN

ROTEL

SAE

SAMSUNG

SANSUI

SANYO

SttARP

SONY

STS

60435

6{}157

60157

60524

60{}0{}, 6{}157

60000, 60087

60861, 6{}034.

SttERWOOD

SIIURE

6018{1, 61684

61{167,

6{}{}43

SONIC FRONTIERS

60157

60180

6{}49{}, 6{}{}00,

6{1100, 61364,

60185, 6179{}

60018

SUGDEN

SYLVANIA

SYMPIIONIC

TAG MCLAREN

60157

60157

601811

TANDY

TDK

TEAC

TECttNICS

TECttWOOD

TItULE AUDIO

60157

60032

61208

60490, 60180,

60362

613029, 60303

6{}303, 60362

TOStIIBA

VICTOR

WARDS

YAMAttA

YBA

YORX

60625

6t1147, 60373

60043, 60234

60362.

60625

6t}157

60868, 61327,

60101, 61685

61063, 60000,

60032, 6{}{}87.

6{}468

6{}{}29, 603{}3,

60388, 6{}752,

61682

60029

6{}626.

60157,

60274

60157

61693, 61694

613072

60032, 60157,

60053, 60087

60490, 60868.

60888, 60036,

61292, 62000,

62{}{}l

60625

60000 viii

CD RECORDER

CLASSIC

DENON

71297

7{)626

FIStIER

GPX

71325

71296

HARMAN/KARDON

71202

JVC

KENWOOD

LG

MARANTZ

PItILIPS

PIONEER

RCA

S ONY

TDK

YAMAHA

71294

7t1626

71208

7/1626

70626

71062, 71087

70053

70000, 70100,

71364

71208

70888, 71292

MD RECORDER

DENON

KENWOOD

ONKYO

OPTIMUS

PANASONIC

PIONEER

StIARP

StIERWOOD

SONY

YAMAItA

70873

7t1681, 70826,

71683

7{)868, 71685

71063

71682

71063

7t1861, 71684

71067

70490, 71790

70490, 70888,

72001

TAPE DECK

A IW]\

DENON

GARRARD

JVC

KENWOOD

NIKKO

ONKYO

OPTIMUS

7() 197

70076, 7/)371,

7t)412

70308. 703119

70244, 70273

70070, 70205,

70365

70365

7{)135, 70282

70027

PANASONIC

PIONEER

RCA

SHARP

SONY

70229

711027. 70099

70027

70205, 70371,

70412

70243, 70170,

TEAC

TECttNICS

70291

70308, 70309,

7{)365

70229

TECtINOVOX 70229

TECItWOOD 7t1365

VICTOR

W_,\RDS

7t1273

70027

YAMAHA 71X197.70205,

70524

TUNER

ADC

AIWA

ALCO

A NA M

ARCAM

AUDIO PRO

AUDIOTRONIC

80531

81405, 80158,

80121, 81388,

81641

81390

81609, 81074

81189

80148

AUDIOVOX

81189

81390

BOSE 81229, 81933

CAPETRONIC 80531

CARVER 81189, 80121

CURTIS MATItES

DELPtI I

DENON

EMERSON

FIStlER

GARRARD

80014, 81X380

81414, 81846

81360, 80121,

80386, 81142

80531

80219

80281

GOLDSTAR

GRUNDIG

80281

811281

HARMAN/KARDON

IIITACtII

80110

80386

INTEGRA 80135.80842,

81298, 81321)

JBL

JVC

KAW_,\SA KI

KENWOOD

KLtt

LG

MAGNAVOX

MARANTZ

80110

81058, 80074,

80262, 80464,

81374, 81495,

81665

81391)

80027, 80186,

80262

81390

80281

81189, 81269.

80531. 81266

81189, 81269,

811039, 81671

80039 MCS

MICROMEGA

MYRYAD

81189

81189

ONKYO

OPTIMUS

PANASONIC

PENNEY

PIIILIPS

80135, 80380,

80842, 81298.

81320, 81677

81023, 80158,

80074, 80014,

8t1080, 8012 I,

80186, 80219,

80531,81074

81308, 81518,

801139, 80367,

81275, 81288,

81316, 81548,

81633, 81675,

81763, 81764

8(t039

81189, 81269,

81266

PIONEER

81384, 81678

POLK AUDIO 81414

PROSCAN

QUASAR

81254

8!){139

RADIOSHACK

81023, 80014,

80080, 80150,

80281, 80531,

80630, 81284,

RCA

81609

81023, 81609,

81254, 80080,

80531, 811174,

81390, 81511

REALISTIC

SANSUI

81609,80158.

80121, 80186

81189, 80148,

81764

80219

80186, 80262

SANYO

SttARP

SONIC

SONY

80281

81058, 81441,

81258, 81759,

81622, 80158,

81406. 81558,

81658, 81758,

STEREOPHONICS

81858

TEAC

TECItNICS

TECItWOOD

TtIORENS

TOSHIBA

81023

811174. 81390

81308,81518,

80039, 81384,

81633, 81675

80281

81189

80080, 80135,

VENTURER

VICTOR

WARDS

XM

80842

81390

801174

80158. 81!014.

81,_,)80

81406, 81414,

81846

YAMAItA 81023,80176.

80186, 80376,

81176,81276,

81331. 81375,

82(JIM

(TUNER IDI) 821105

(TUNER ID2t 81949

(XM ID 11 821X16

(XM ID2t

ZENITH

82(X17

80281

OTHER AUDIO

ACCESSORIES

YAMAIIA

(iPod)

82001, 820112

82000

@YAMAHA

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH,

AVE., BUENA PARK, CALIF. 90620, U.S.A.

ONTARIO M1S 3m, CANADA

YAMAHA ELECTRONIK

YAMAHA ELECTRONIQUE

YAMAHA ELECTRONICS

EUROPA G.m.b,H.

SIEMENSSTR.

FRANCE S.A. RUE AMBROISE

(U K) LTD. YAMAHA

22-34, 25462 RELL[NGEN

CROIZAT

HOUSE, 200 RICKMANSWORTH gEl HAMBURG,

BP70 CROISSY-BEAUBOU

GERMANY

RG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

ROAD WATFORD, HERTS WD18 7GG, ENGLAND

YAMAHA SCANDINAVIA A,B, J A WETTERGRENS

YAMAHA M USIC AUSTRALIA

GATA

PTY, LTD. 17-33 MARKET

1, BOX 30053,

ST., SOUTH

400 43 VASTRA

MELBOURNE,

FROLUNDA, SWEDEN

3205 V[C., AUSTRALIA

@2007 YAMAHA CORPO£ATiON A[[ rights reserved.

YAMAHA CORPORATION

Printed in Malaysia c WK01920

@YAMAHA

• Front panel

_YAMAHA

HTR-6080/HTR-6060

• Remote control

@

©

CLASSICAL UVE/CLUB ENTERTAIN MOVIE

STEREO_ EN_ERISTRAIGHT

NIGHT

PUREEIRECT

YAMAHA CORPORATION

Printed in Malaysia C WK14560