Induction Green Heat

Garland Induction Tabletop

Heat Retaining Unit RTCSmp Hold-Line

Models

• GI-HO 1500

Project ______________________________________

Item _________________________________________

Quantity ____________________________________

CSI Section 11400

Approved ___________________________________

Date _________________________________________

Induction warm holding system consisting of:

Induction generator with two heat retaining/ holding zones.

Equipped with the latest RTCSmp (Realtime

Temperature Control System) technology.

Standard Features

Induction generator:

• A generator, developed specifically for heat retaining/holding, built in an aluminum enclosure, which includes an integrated air fan.

• Fresh air is supplied by the fan, located at the bottom of the unit. The unit is also equipped with an air guiding system that directs the hot air out of the housing.

Heat retaining plate:

• The heat retaining plate is equipped with the latest RTCSmp sensor technology which enables temperature controls in real-time.

The set temperature is displayed via a

7-segment display underneath the ceramic glass. The heat retaining plate includes five

(5) temperature sensors per zone.

• The unit has two zones that can be controlled at different temperatures.

Control unit:

• The control switches are located on the bottom sheet of the unit, easy accessible for the user.

• The control unit regulates the temperature in an increment of 5°F (1°C) and this from

122-212°F (50 to100°C). The set temperature and the current temperature are shown via the 7-segment display that is located underneath the ceramic glass.

Safety above all:

• RTCSmp electronic temperature control that monitors the state of the induction coil, power board, CPU and the ceramic glass temperature.

• RTCSmp monitors the energy supply.

• No Pan No Heat – Only if an induction suitable pan is located on the glass that energy will be consumed.

Options &

Accessories

• Optional induction ready holding pans are available, please contact your dealer for sizes and prices.Cable kit: 4m (SKU#

95000246) or 6 m (SKU# 95000247).

CE models comply with the latest European Norms:

EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)

North American models:

ETL recognized in compliance with

UL 197, CSA C22.2 No.109, NSF-4

Complies with FCC part 18, ICES-001

Garland Commercial Ranges Ltd.

1177 Kamato Road,

Mississauga, Ontario

L4W 1X4 CANADA

General Inquires 1-905-624-0260

USA Sales, Parts and Service 1-800-424-2411

Canadian Sales 1-888-442-7526

Canada or USA Parts/Service 1-800-427-6668 www.garland-group.com

6846

12/18

INTERTEK

CM

SAN

ITATION LIST

ED

INTERTEK

CM

LISTED

31.50” (800 mm)

30.39” (772 mm)

15.75” (400 mm)

14.65” (372 mm)

4.49”

(114 mm) air exhaust air supply

15.75”

(400 mm)

31.50” (800 mm) temperature control field 2

3.94”

(100 mm) air exhaust

7.87”

(200 mm)

3.94”

(100 mm)

2.05”

(52 mm)

2.56”

(65 mm)

Technical Data

Generator housing: 31.5”x15.75”x4.5” (800x400x114 mm)

Wattage: 120V, 1Ph, 1500W, 12A

Quantity of heat retaining zones: 2

Power per plate: 750W

Ceran glass: 31.5”x15.75”x0.16” (800x400x4 mm) port for service interface

ON/OFF

Switch grease filter/ air supply temperature control field 1

4.33”

(110 mm)

7.87”

(200 mm)

3.54”

(90 mm)

5.98”

(152 mm)

2.24”

(57 mm)

Garland/ U.S. Range products are not approved or authorized for home or residential use, but are intended for commercial applications only. Garland/ U.S. Range will not provide service, warranty, maintenance or support of any kind other than in commercial applications.

Welbilt reserves the right to make changes to the design or specifications without prior notice.

Garland Commercial Ranges Ltd.

1177 Kamato Road,

Mississauga, Ontario

L4W 1X4 CANADA

General Inquires 1-905-624-0260

USA Sales, Parts and Service 1-800-424-2411

Canadian Sales 1-888-442-7526

Canada or USA Parts/Service 1-800-427-6668 www.garland-group.com

6846

12/18