advertisement
Garland Induction Built-in Heat
Retaining Unit RTCSmp Install Hold-Line
Models
• GI-HO/IN 1800
Project ______________________________________
Item _________________________________________
Quantity ____________________________________
CSI Section 11400
Approved ___________________________________
Date _________________________________________
Modular induction built-in concept consisting of:
Induction generator, 1-2 control switches and
1-4 heat retaining plates. Equipped with the latest RTCSmp (Realtime temperature control system) technology.
Standard Features
Induction generator:
A generator, developed specifically for heat retaining/holding, built in an aluminum enclosure, which includes an integrated air fan and connectors in the front of the housing, that are completely protected against impacts. All connections, such as mains cable, plugs for control units, coil connection and temperature sensors are accessible from the outside.
Fresh air is supplied by the fan, located at the bottom of the unit. The unit is also equipped with an air guiding system that directs the hot air out of the housing on its left and right side. With this system, a recirculation of exhausted air is not possible.
Heat retaining plate:
The heat retaining plate is equipped with the latest RTCSmp sensor technology which enables temperature controls in real-time. The set temperature is displayed via a 7-segment display underneath the
Ceran glass. The heat retaining plate includes three (3) temperature sensors as well as the connectors for the coils and the sensors.
Thanks to a space saving and compact design construction of the heat retaining plate, stand alone installations in shallow cabinets are possible.
Control unit:
The control switch consists of a chrome sheet metal cover with a built in power switch. The power switch is enclosed in polymer housing, with high resistance to external impacts. The control switch is connected with the generator via an RJ45 cable. The control unit regulates the temperature in an increment of 1°C and this from 122-
212°F (50 to100°C). The set temperature and the current temperature are shown via the 7-segment display that is located underneath the
Ceran.
Safety above all:
RTCSmp electronic temperature control that monitors the state of the induction coil, power board, CPU and the Ceran glass temperature.
RTCSmp monitors the energy supply
No Pan No Heat – Only if an induction suitable pan is located on the glass that energy will be consumed.
Optional Features
Optional induction ready holding pans available contact your dealer for sizes and prices.
INTERTEK
CM
LISTED
INTERTEK
CM
C SAN
ITATION LIST ED
US
CE models comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)
North American models:
ETL listed in compliance with UL 197, CSA C22.2 No.109, NSF-4
Complies with FCC part 18, ICES-001
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668 www.garland-group.com
6958
12/18
Technical Data:
Generator housing:
11.93”x12.28”x5.31” (303x312x135 mm)
Wattage: 120V, 1Ph, 1800W, 15A
Air flow fan: 3390 ft 3 /h (96m 3 /h maximal)
Cut out for air supply: 9.30 sq. in (6000mm 2 , at least)
Dimensions heat retaining plate:
12.68”x12.68”x2.95” (322x322x75 mm)
Least cut out:
12.99”x12.99”x3.94” (330x330x100 mm)
Qty. of heat retaining plates: 1 - 4
Power per plate: 450W
Ceran glass:
12.68”x12.68”x0.16” (322x322x4 mm)
Welbilt reserves the right to make changes to the design or specifications without prior notice.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668 www.garland-group.com
6958
12/18
advertisement
Related manuals
advertisement