Proox PR-A3585-BN 2-Handle 2-Spray Round High Pressure Shower Faucet 10 in. Ceiling Shower Faucet Set 安装指南
Add to My manuals11 Pages
advertisement
▼
Scroll to page 2
of
11
![Proox PR-A3585-BN 2-Handle 2-Spray Round High Pressure Shower Faucet 10 in. Ceiling Shower Faucet Set 安装指南 | Manualzz Proox PR-A3585-BN 2-Handle 2-Spray Round High Pressure Shower Faucet 10 in. Ceiling Shower Faucet Set 安装指南 | Manualzz](http://s1.manualzz.com/store/data/067153658_1-33b37ed0d54e23d3b7e4da50ce58e240-360x466.png)
INSTALLATION MANUAL Luxury Shower Set Style may vary by model, but the installation ways are the same | 1. New installations | NOTE!!! 1. 2. 0 N Supply lines should be purged to clean impurities before connecting the unit. The hot water supply should be connected to the left and the cold water supply to the right, when viewed from the operating position. If this is not taken into account can cause permanent damage to the cartridge. . Screw connections and test for leaks. . Using a spirit level on the cams, the mixer align horizontally, vertically and parallel to the wall. . Warm reminder: In the cold areas or the indoor temperature is less than 39°F in Winter, if no using the faucets for a long time, please turn off the inlet water valve and drain the remaining water inside the supply pipe, which can avoid the faucet damage caused by the expansion of the frozen water. | 2. Installation Preparation | Read the instructions carefully before installing. . The installation must be performed by a qualified person Installation tools: | 3, Accessory list Description Qty Pressure balanced valve Cover board Diverter handle Cartridge handle Hand shower holder Shower hose Hand shower Shower head Shower arm на | = Е: => [Ojo] | oO] м|+>|&|№|+ | 5 Cover board Allen-Key r Mm Raja jajajaja ja Pe fe fa Screws bag | 5, Chiseling wall diagram | Unit:inch | ь pe in > TY 2.36" —3.14" Shower head _ 1.8 walls | |_ Tiles (js ovate > (ESS D Cold water р inlet © Hand shower outlet | 6, Pipe-connection diagram | \ 7. Water test and leak detection | 1. After connecting all pipes, please dis-assembling the plastic protection cover, and switch on/off the cartridge, check all connections without any leakage, and all connections connecting to the required functional outlets. 2.Re-install the plastic protection cover to the valve. 8, Wall tiling program | 1. Use aparallel ruler to make sure the wall and valve being parallel. Wall | 9, Cover and handle installation 1. Take off the plastic protection cover. 2.Put the cover board on the valve and tight the handle firmly | 10, Shower sets installation | OPAL ER RK | 11, Shower installation | 12, Cleaning & Maintenance | To keep the product clean&shining, follow the steps as follows: 1. Flush with clean water& dry with soft cloth only. 2. If any dirt, clean with soft liquid or transparent glass detergent. 3. Do not use any scrubbing detergent, polisher, sand-cloth, paper tissue or scraper. 4. Do not use acid detergent, insoluble&grain-like detergent or soap. | 13, Important notice | For Installation Support, Missing Parts or Damaged Product, please do not return, just send email to to get FREE parts or product! 10
advertisement