MOUNTING INSTRUCTIONS - SMSRDCAM, SMSWMCAM
V20.09
The included hardware is for drywall mounting ONLY. To mount the security camera onto a different wall type or the ceiling, please choose the proper hardware from your local hardware store.
IMPORTANT: For your safety, this camera should be installed by a trained and experienced person who is familiar with the work. the bollard must be installed in accordance with applicable installation code by a licensed person who is familiar with the construction of the product.
Step 1. Place the security camera against the wall at the desired location. Mark the center of each hole on the mounting surface.
Step 2. Drill holes at the marked locations using a power drill. Use a drill bit that is slightly smaller than the wall anchor.
NOTE: The mounting plate may vary depends on camera model.
NOTE: Make sure the security camera is mounted at a location within the Wi-Fi range.
Step 3. Insert wall anchors into the drilled holes and use a hammer to tap each wall anchor so that it’s flush against the mounting surface.
Step 4. Line up the holes in the mounting plate with the anchors, then insert and tighten screws to fix the camera securely.
The installation is completed.
Scan QR code to visit the product page:
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service at 844-221-3393.
