Schneider Electric EcoStruxure Augmented Operator Advisor - App User Manual

launched from another application, page 38

App

Introduction

Launch the App by tapping the icon or via the Windows icon on a Windows tablet.

After launching the App, you can access a project by connecting to a remote runtime device where the project is running.

Alternatively you can access projects that have been locally copied onto your tablet.

You can also access sample projects that are provided with the App, in order to develop a better understanding of the available functions.

NOTE: The EcoStruxure Augmented Operator Advisor App can also be

. A specific implementation is required.

Preferred Sites Page Description

Overview of the Preferred Sites Page

After launching the EcoStruxure Augmented Operator Advisor App, the Preferred sites page appears:

EIO0000003598.09

App

Custom connection

127.0.0.1 - 80

Preferred sites

LOGIN

Display: Show all

Sample projects

Samples

LOGIN

Legend

Augmented Operator Advisor

Version: x.y

Name

Remote Assist icon

Display mode

Sample projects card

Description

Tap to display the menu. From here you can change general settings for the application such as interface language and cache management.

You can also access information about the App under About .

Tap to open the Dynamics 365

Remote Assist application.

Tap the scrolling menu to filter the displayed projects in the Preferred sites page.

Tap this card to access the sample projects and get an overview of the scene recognition function of the

EIO0000003598.09

Legend

Name

Add a new card

Custom connection card

App

Description

EcoStruxure Augmented Operator

Advisor App.

You can choose to remove this card from your Preferred Sites page in the

Settings menu, page

35 .

Tap this icon to create new preferred sites by adding new cards to the Preferred sites page.

Tap this card to edit a custom network connection to projects running on a runtime device.

Creating a New Card

Overview

Creating a new card allows you to add new customized cards on the Preferred sites page.

Three types of cards can be created:

Remote connection card

Local project card

Local project with remote connection card

To connect to a project running on a remote runtime device. Information can be exchanged between the tablet and the remote device.

To connect to a project stored on the tablet. No information is exchanged between the project and a remote device.

To connect to a specific project stored on the tablet. Information, such as variables and procedures completion, can be exchanged with the remote device.

Configuring the Remote Connection

To configure a remote connection, proceed as follows:

Action Step

Tap the icon.

Result: The Create a preferred site dialog box appears.

Fill the Label , Description , and Default user fields.

EIO0000003598.09

App

copy the project files onto your tablet, page 17 .

Step

Action

Tap Remote .

Result: The Server information section appears.

In the Server information section, fill the Hostname (or IP address) field with the information for your project. If you are using an SSL certificate, you must enter the hostname (not the IP address).

Example: 192.168.0.15

or domain.name.com

Fill the Port field.

Tap Save .

Result: The window closes and your project is saved.

NOTE: If the connection between the App and the EcoStruxure Augmented Operator

Advisor Runtime stops, the items created offline are saved locally on the tablet. A notification is available in the notification center to inform you about this temporary state.

When the connection is reestablished, the items are uploaded automatically to the

EcoStruxure Augmented Operator Advisor Runtime.

Configuring a Local Project

NOTE: Locally copied projects are only valid for 15 days after the project was last modified in the EcoStruxure Augmented Operator Advisor Builder. The 15 days limitation does not apply if you have activated the Local projects add-on license.

To configure a local project, you must first

Then proceed as follows:

Step

Action

Tap the icon.

Result: The Create a preferred site dialog box appears.

Fill the Label , Description , and Default user fields.

Tap Local .

Result: The Local information section appears.

Give a name to your project.

Tap the icon then select the project you want to use.

Tap Save .

Result: The window closes and your project is saved.

16 EIO0000003598.09

copy the project files onto your tablet, page 17

App

Configuring a Local Project with Remote Connection

To create a local project with remote connection, you must first

. Then proceed as follows:

Step

Action

Follow steps 1 to 5 from the procedure

to configure a local project, page 16

then select the

Remote server option.

Example: 192.168.0.15

or domain.name.com

Fill the Port field.

Tap Save .

Result: The window closes and your project is saved.

NOTE: If the connection between the App and the EcoStruxure Augmented Operator

Advisor Runtime stops, the items created offline are saved locally on the tablet. A notification is available in the notification center to inform you about this temporary state.

When the connection is reestablished, the items are uploaded automatically to the

EcoStruxure Augmented Operator Advisor Runtime.

Copying a Project on a Tablet

To copy the project files onto a tablet, proceed as follows:

EIO0000003598.09

App

Step

Action

On your computer, unzip your project zip file in a new folder.

NOTE: You can rename the folder according to the name of your project.

Connect your tablet to your computer with a USB cable.

Copy the created project folder from the computer to the following folder on your tablet:

• On an Android tablet: ..\Android\data\com.schneiderelectric.

AugmentedOperator\Local

• On an iOS tablet: ..\Apps\Ecostruxure Augmented Operator Advisor\Documents

\Local

• On a Windows tablet: Start

Folder

> EcoStruxure Augmented Operator Advisor > App Project

NOTE: If requested, do not convert any file formats. Keep the original file formats.

Using the Custom Connection Card

Configuring the Connection

You can access a project that is running on a remote runtime device as follows:

Step

Action

Launch the EcoStruxure Augmented Operator Advisor App in your Tablet.

In the Preferred sites page, tap the Custom connection card and tap EDIT .

Result: The card expands and new options are available.

Fill the Default user field.

Example: 192.168.0.15

or domain.name.com

Fill the Port field.

Tap Save .

Result: The window closes and your project is saved.

18 EIO0000003598.09

Logging In to a Project

App

Overview

To access a project, you first need to log in with your user name and password credentials.

Logging In to a Project

To log in to a project:

Step

Action

Launch the EcoStruxure Augmented Operator Advisor App in your tablet.

From the Preferred Sites page, tap LOGIN in the card for the project you want to access.

Result: The LOGIN window appears.

Fill the User name and Password fields.

NOTE: For sample and local projects, log in with your user name to keep a history record of the work you do.

Activate the Remember me option if you want to save your credentials for next login.

• This option is only available when you have a protected tablet, for example: using a screen lock secured with a password, a fingerprint or a schema.

• For local projects, the Remember me option is unavailable.

• Credentials are saved after you successfully logged in and are stored for 90 days. After that time or if you restart the EcoStruxure Augmented Operator Advisor Runtime, re-enter your credentials and activate the Remember me option to save them again. If you want to deactivate the Remember me option, deselect your user name checkbox on the project card.

• The Remember me option is unavailable when you are connected to an old version of

EcoStruxure Augmented Operator Advisor Runtime even if you are using version 2.9

EcoStruxure Augmented Operator Advisor App.

Tap LOGIN .

Result: The Home page opens.

Home Page Description

When you log in to a project, the main components of the Home page are as follows:

EIO0000003598.09

App

Project

Sample demos

Area

Wood

All Procedures Scenes

Home

CabinetOpen Change blade

Last Used Most Used 7

Is in progress

Check Fuse

Front machine Inside Little Cabinet Cabinet

Legend

Name

Scene

Filter by type

Search box

Project

Description

Tap to view the scene.

Tap either Procedures or Scenes to display only the available procedures or scenes for the selected area.

Search for a scene or a procedure label or enter the tag value of a scene.

Shows the current project name, tap to display the project description.

Tap to display the menu. From here you can change general settings

EIO0000003598.09

Legend

Name

Area

Sort by Most Used / Last Used

Procedure

Start camera

App

Description for the application such as interface language and cache management.

You can also access information about the App under About and

Log out from the project.

Shows the last used Area name.

Tap to display the current area description. For multi-area projects, tap areas.

to display the available

Tap either Most Used to reorder and display the most viewed scenes and procedures or Last

Used to display the recent viewed among operator users of the same group created in EcoStruxure

Augmented Operator Advisor

Manager.

Tap the procedure to display its details. Tap to launch it. When a procedure was launched and not yet finalized, a status IN

PROGRESS is displayed.

Tap to start scenes recognition in the selected area.

Using the Sample Projects Card

To use the sample projects, you must first download the sample images that are available on the schneider-electric.com website. Go to the URL www.se.com

, search for EcoStruxure

Augmented Operator Advisor. Click download image gallery then display the required image on a TV or computer screen.

Step

Action

Launch the EcoStruxure Augmented Operator Advisor App.

Tap LOGIN on the sample project card.

If the sample project card is not available, you need to set Show Sample Projects Card in the

Settings menu, page 35

Result: The Home page is displayed.

Tap to the right of the Area tab and select the area to be monitored.

EIO0000003598.09

App

Step

Action

You can either tap to launch the scene recognition or open / view a scene.

Point the camera of the tablet at the external display where the downloaded image is shown.

Result: The scene is recognized and points of interest are displayed on the tablet.

22 EIO0000003598.09

built-in document browser (see EcoStruxure Augmented

App

User Interface Description

EcoStruxure Augmented Operator Advisor App

When you start the camera, the following figures show examples of the user interface after a scene has been recognized by the App.

Scenes

Legend Name

1 Settings

2 Favorites

Document browser

Action

Description

Tap to display the Settings menu.

Tap to display or hide the Favorites bar at the top of the screen. Information about the scene is updated in the Favorites bar even when the scene is frozen, or if the point of interest is closed, or if another scene is being viewed.

Tap to open or close the

Operator Advisor, App, User Manual)., page 28

When the cross in the center of the screen is over a point of interest, tap to launch the corresponding action (display a document, open a subscene,...).

EIO0000003598.09

App

Legend Name

5 Note

Screenshot

Freeze

Description

Tap to add a note on the scene. Tap and hold to add a note with your latest screenshot attached to it. This can be used, for example, to leave information for other operators. Tap the note attachment to display it in full screen.

Tap to edit the note if you want to modify or remove it. If you remove it from the App, the note remains available in the EcoStruxure Augmented Operator

Advisor Manager.

You can add up to 10 notes in a scene. Each note can contain up to 255 characters and up to 3 attachments (20 MB maximum).

NOTE: If the App is not connected to the EcoStruxure Augmented Operator

Advisor Runtime while creating the note, the note is saved locally on the tablet. A notification is available in the notification center to inform you about this temporary state. When the connection is reestablished, the note is uploaded automatically to the EcoStruxure Augmented Operator Advisor

Runtime.

Tap to make a screenshot of the scene. The screenshot is saved locally and it can be attached to a note.

Tap to freeze the display, this allows you to put down or lower the tablet and still see the scene and points of interest. Project actions continue and the

Favorites bar continues to be updated.

24 EIO0000003598.09

The other components of the user interface are as follows:

Scenes

2 3 4

App

Legend Name

Home

Notification center icon

Description

Tap to return to the Home page.

Indicates a message from the Notification center.

Tap to display the notification messages.

Indicates whether the App is connected to the runtime device (black icon on a white background) or not connected (flashes red).

Connection to the runtime device

Remote Assist icon

Tap to display the list of assigned experts.

Click an expert ID to open the Dynamics 365 Remote Assist application and contact the expert.

NOTE: The Dynamics 365 Remote Assist application has to be installed on the same tablet.

Remote Assist is available on Android and iOS tablets.

EIO0000003598.09

App

procedures (see EcoStruxure Augmented Operator Advisor,

A point of interest is a position in a scene for which additional diagnostic or technical information is available. Various types of points of interest can be displayed as follows:

Scenes

Variable point of interest

Display the real-time value of the variable.

Tap next to the point of interest to add the information item to the Favorites bar at the top of the screen.

Tap to display the selected subscene.

Subscene

Favorite bar Regroups all your favorite points of interest and allows you to quickly access your information. You can add up to 10 favorites in an area.

NOTE: Information displayed in the favorite bar is not updated by points of interest settings such as font size, color, or theme.

List point of interest

Tap to display a list of information items, such as process variables or documents.

Procedure item Tap to launch the

App, User Manual)., page 32

Image point of interest

An image overlaid on the scene image.

EIO0000003598.09

App

Alternatively, if the tablet is not in front of the equipment to be monitored, the EcoStruxure

Augmented Operator Advisor App can view the available scenes and procedures contained in the project. When you open a scene, an image of the scene with the points of interest is displayed, the real-time values of process variables are generated and the triggers associated with the scenes are still active as if you are monitoring the equipment with a camera. It also displays the documents attached to an area or scenes in the document browser, in a split screen.

Area

Scene

EIO0000003598.09

App

Built-in Document Browser

Documents attached to an area or scenes are displayed in the document browser, in a split screen.

Documents attached to a point of interest can be displayed either in split screen in the document browser, or in full screen. This is defined in the content of your project.

Scenes - 1

Area

Scene

1. If the document browser is open and you move to another scene, tap to update the document browser with the content of the new scene.

2. Drag to adjust the size of the split screen.

To use the built-in document browser:

28 EIO0000003598.09

Training mode (if available), page 31 .

App

Step

Action

Tap icon in the left sidebar to open or close the document browser.

Result: The document browser window opens in a split screen containing the documents attached to the selected area and available scenes.

Tap the corresponding attached document under Area or Scene to open it.

Result: The attached document opens in a split screen.

Scenes

3 Tap icon to close the opened document and return to the list of the attached documents.

EIO0000003598.09

App

Procedures

Overview

In the Home page, you can see the available procedures within an area and launch a procedure from there.

During scene recognition, you can also launch a procedure by tapping the relevant point of interest.

Procedures can be launched in

Prerequisites

The selected project must include procedures.

30 EIO0000003598.09

Accessing Information About Procedures

Step

Action

In the Home page, tap a procedure to display its details.

Result: The procedure details page opens:

Change blade

Description: Change blade

Last run: 5/09/2022 By: JohnDoe

STEPS HISTORY

IS IN PROGRESS Started: 5/9/2022 By: JohnDoe

Expert mode TRAINING LAUNCH

Duration: 48 s Played Steps: 2

Safety equipment

App

Check the stand

Remove piece of wood

Open cabinet

CURRENT STEP

You can launch the procedure by tapping LAUNCH .

You can also launch a procedure in

Training mode, page 31

STEPS

HISTORY allows you to see all steps of the procedure and restart where you stopped last time the procedure was executed.

allows you to see the list of dates when the selected procedure has been executed and some additional information. The procedure history list is limited to the most recent 1000 entries in a given area.

NOTE: If your user account has sufficient rights, you can also launch a procedure in Expert mode . This allows you to skip steps, to go through them in a different order, or to complete the procedure by directly jumping to the last step.

Launching Procedures in Training Mode

In Training mode , you can test a procedure or train operators to use procedures in the App, without needing to recognize the scene.

EIO0000003598.09

App

launching a procedure, page 32

You can launch a procedure in Training mode if a TRAINING button is available in the procedure information.

The Training mode allows you to skip steps, to go through them in a different order, or to complete the procedure by directly jumping to the last step.

When executing a procedure in Training mode :

• You cannot create or display notes.

• No history of the procedure progress is saved.

• Scenes attached to steps in a procedure or its subprocedures are displayed in full screen, without needing to be recognized.

To launch a procedure in Training mode :

Step

Action

In the Home page, tap the required procedure to display its details.

Tap TRAINING to launch the procedure.

Result : The procedure starts and Training mode is displayed on the screen. You can then freely navigate through the procedure steps.

Launching Procedures from the Home Page

To launch a procedure:

Action Step

Tap for the corresponding procedure to launch it.

Result: The scene recognition window appears and the procedure starts.

Follow all steps until completion.

NOTE: Some steps may require you to point the tablet camera at a specific project scene.

This is defined in the content of your project.

Using Procedures

After

, the following options are available.

32 EIO0000003598.09

Safety equipment

Check the stand

03 Remove piece of wood

04 Open cabinet

05 Power off the motor

06 Move the guide

07 Change the blade

Change blade

03 Remove piece of wood

Remove piece of wood

Please remove all pieces of wood on the stand

App

Legend Name

1 Current step

Procedure name

Guided mode options

List of steps

Step action

Description

Display the name and number of the current step.

Display the name of the current procedure.

Tap to switch between Guided mode and Expert mode . In Guided mode , you must follow each step in the correct order to complete the procedure. In Expert mode , you can click End to complete a procedure without going through all steps.

NOTE: Expert mode is only available if your account has sufficient rights.

Tap to display the complete list of steps within the current procedure.

Display the name of the step and the action you must follow.

EIO0000003598.09

App

Legend Name

6 Right arrow/

Procedure validation

7 Left arrow

Description

At the end of the procedure, the right arrow is replaced by the procedure validation button:

• Right arrow — Tap to go to the next step in the procedure.

• Procedure validation — Tap to validate the current procedure. Then you can save a history of the completed procedure.

NOTE: If the App is not connected to the EcoStruxure Augmented Operator

Advisor Runtime during the procedure validation, the procedure history is saved locally on the tablet. A notification is available in the notification center to inform you about this temporary state. When the connection is reestablished, the procedure history is uploaded automatically to the

EcoStruxure Augmented Operator Advisor Runtime.

Tap to go to the previous step of the procedure.

34 EIO0000003598.09

App Settings

App

EcoStruxure Augmented Operator Advisor App

Settings

Configuring the EcoStruxure Augmented Operator

Advisor App

You can configure the EcoStruxure Augmented Operator Advisor App in the Settings menu:

• General settings

• Cache Management

• Point of interest settings

• Advanced settings

General Settings

Parameters

Basic request timeout

File transfer timeout

Language

Show Sample Projects Card

Description

Set the time limit for the remote device response before timeout occurs (5...180 s in set increments).

Set the time limit for the remote device response for the file transfer before timeout occurs (30...300 s in set increments).

Set the language for the App interface. You must restart the

App to apply the new language.

NOTE: This option does not change the language of the projects.

Activate this option to show sample projects in the

Preferred sites page.

Cache Management

Cache Management settings only apply for remote projects.

EIO0000003598.09

App

Parameter

Use cache

Cache size

Reset cache

Select the camera

App Settings

Description

Activate this option to allow the application to use the cache of the tablet.

Cache is used to temporarily store data, shorten information access times and reduce latency for future requests.

Set how much space is dedicated to data storage (100 MB to unlimited).

Click Clear to clean the cache of the App.

Sign out if you want to clear the complete cache including for the current project.

Point of Interest Settings

Parameter

Pointing circle size

Allow auto activation

Auto activation timer

Style

Font size

Description

Set the pointing circle size for the auto opening of the points of interest that are inside the circle. The larger the circle, the easier it is to match a point of interest. A smaller circle may be needed if points of interest are close together. Available pointing circle sizes are: None, Small, Medium, Large.

Automatically activate the point of interest in the center of the pointing circle area.

Set the timer for the auto activation (from 1...10 s).

Choose either the Default theme or Darken theme style.

Set the font size for the scene recognition window. Available font sizes are: Small, Small+, Medium, Medium+, Big, Big+.

Advanced Settings

Parameter

Filter

Description

Activate this option to allow filtering for tag scenes.

Filtering helps to stabilize points of interest during display but can produce latency.

Set which camera (rear camera or front camera) to use for scene recognition.

36 EIO0000003598.09

App Settings

Parameter

Automatic camera resolution

Camera resolution

App

Description

Activate this option to allow the application to automatically choose the most optimal camera resolution for your project.

When deactivated, the camera resolution can be manually adjusted.

Set the camera resolution when using the application (from

640x480 px to 1920x1080 px).

NOTE: The default camera resolution is set to 640x480 px and it is recommended to keep this setting.You can increase the camera resolution to improve tag recognition depending on the distance between you and the tag scene you need to track.

EIO0000003598.09

App

the tables below, page 38

Launching the EcoStruxure Augmented Operator

Advisor App from Another Application

Introduction

This information is addressed to the developers of other software applications. It describes how to launch the EcoStruxure Augmented Operator Advisor App from another application.

This could be for situations when, for example, using an external maintenance application, you want to execute a procedure managed on the EcoStruxure Augmented Operator

Advisor App.

Your project must be available on the runtime device, or copied locally on the tablet.

Specific actions can also be triggered through an external application using defined URI commands provided by EcoStruxure Augmented Operator Advisor App. The defined list of actions is provided in

If the App is already running, it must be on the Preferred sites page.

How to Launch the EcoStruxure Augmented Operator

Advisor App from Another Application

You can launch the App from another application, using different URI commands, depending on the type of your project:

•

Remote project, page 15

•

Local project, page 16

•

Local project with remote connection, page 17

If your project is running on a remote runtime device, launch the App as follows:

Use cases

Open the

EcoStruxure

Augmented

Operator Advisor

App

Open a project

URI Command aoa:// aoa://<SERVER>:<PORT>/v1.0/SelectProject?projectLabel=

EIO0000003598.09

App

Use cases URI Command

• Example : aoa://196.162.1.1:80/v1.0/SelectProject?projectLabel=

TestProject

Open an area of a project aoa://<SERVER>:<PORT>/v1.0/SelectArea?projectLabel=

<PROJECTNAME>&areaLabel=<AREANAME>

• Example : aoa://196.162.1.1:80/v1.0/SelectArea?projectLabel=

TestProject&areaLabel=TestArea

Open scene recognition in an area

Open a document of a project aoa://<SERVER>:<PORT>/v1.0/StartArea?projectLabel=

<PROJECTNAME>&areaLabel=<AREANAME>

• Example : aoa://192.168.1.109:80/v1.0/StartArea?projectLabel=

StartAreaTest&areaLabel=Area1 aoa://<SERVER>:<PORT>/v1.0/OpenAreaDoc?projectLabel=

<PROJECTNAME>&areaLabel=<AREANAME>&documentLabel=<DOCUMENTNAME>

• Example : aoa://192.168.1.10:80/v1.0/OpenAreaDoc?projectLabel= openDocTest&areaLabel=area1&documentLabel=picture

Open a procedure aoa://<SERVER>:<PORT>/v1.0/SelectProcedure?projectLabel=

<PROJECTNAME>&areaLabel=<AREANAME>

• Example : aoa://196.162.1.1:80/v1.0/SelectProcedure?

projectLabel=TestProject&areaLabel=TestArea&procedureLabel=

Procedure1

Launch a procedure aoa://<SERVER>:<PORT>/v1.0/StartProcedure?projectLabel=

<PROJECTNAME>&areaLabel=<AREANAME>procedureLabel=<PROCEDURELABEL>

• Example : aoa://196.162.1.1:80/v1.0/StartProcedure?projectLabel=

TestProject&areaLabel=TestArea&procedureLabel=Procedure1

(1) <SERVER>:<PORT> is the hostname (or IP address) and port of your runtime device

(2) <PROJECTNAME>,<AREANAME> and <PROCEDURELABEL> are the project, area and procedure names entered in the EcoStruxure Augmented Operator Advisor Builder when the project was created. These names must be entered exactly as defined in the reference language of the project.

If your project is copied locally, launch the App as follows:

Use cases

Open the

EcoStruxure

Augmented

Operator Advisor

App

Open a project

URI Command aoa:///

Open an area of a project aoa:///v1.0/SelectProject?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>

• Example : aoa:///v1.0/SelectProject?localProjectFolder=

LocalProjects&projectLabel=TestProject aoa:///v1.0/SelectArea?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>&areaLabel=

EIO0000003598.09

App

Use cases URI Command

• Example : aoa:///v1.0/SelectArea?localProjectFolder=

LocalProjects&projectLabel=TestProject>&areaLabel=TestArea

Open scene recognition in an area aoa:///v1.0/StartArea?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>&areaLabel=

• Example : aoa:///v1.0/StartArea?localProjectFolder=

Project&projectLabel=StartAreaTest&areaLabel=Area1

Open a document of a project

Open a procedure aoa:///v1.0/SelectProcedure?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>&areaLabel=

<AREANAME>&procedureLabel=<PROCEDURENAME>

• Example : aoa:///v1.0/SelectProcedure?localProjectFolder=

LocalProjects&projectLabel=TestProject>&areaLabel=

TestArea&procedureLabel=TestProcedure

Launch a procedure aoa:///v1.0/OpenAreaDoc?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>&areaLabel=

<AREANAME>&documentLabel=<DOCUMENTNAME>

• Example : aoa:///v1.0/OpenAreaDoc?localProjectFolder=

Project&projectLabel=openDocTest&areaLabel=

Area1&documentLabel=picture aoa:///v1.0/StartProcedure?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>&areaLabel=

<AREANAME>&procedureLabel=<PROCEDURENAME>

• Example : aoa:///v1.0/StartProcedure?localProjectFolder=

LocalProjects&projectLabel=TestProject>&areaLabel=

TestArea&procedureLabel=TestProcedure

(1) <PROJECTNAME>, <AREANAME> and <PROCEDURENAME> are the project, area and procedure names entered in the EcoStruxure Augmented Operator Advisor Builder when the project was created. These names must be entered exactly as defined in the reference language of the project.

(2) <PROJECTFOLDERNAME> is the folder where the project is copied on the local PC.

If your project is copied locally with remote connection, launch the App as follows:

Use cases

Open the

EcoStruxure

Augmented

Operator Advisor

App

Open a project

URI Command aoa://

Open an area of a project aoa://<SERVER>:<PORT>/v1.0/SelectProject?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>

• Example : aoa://196.162.1.1:80/v1.0/SelectProject?

localProjectFolder=LocalRemoteProjects&projectLabel=

TestProject aoa://<SERVER>:<PORT>/v1.0/SelectArea?localProjectFolder=

<PROJECTFOLDERNAME>&projectLabel=<PROJECTNAME>&areaLabel=

EIO0000003598.09