Infineon XE164 Microcontroller Application Note

PDF

દસ્તાવેજ

જાહેરાત

A p p l i c a t i o n N o t e , V 2 . 0 , M a y 2 0 0 8

AP16137

X E 1 6 4

U C o n n e c t - C A N X E 1 6 4 " C o o k e r y B o o k " f o r a h e l l o w o r l d a p p l i c a t i o n u s i n g t h e K E I L t o o l c h a i n ( y o u c a n d o t h e h e l l o w o r l d e x a m p l e i n t h i s d o c u m e n t w i t h t h e e v a l u a t i o n v e r s i o n o f t h e K E I L t o o l c h a i n )

M i c r o c o n t r o l l e r s

Edition 2008-07-16

Published by

Infineon Technologies AG

81726 München, Germany

© Infineon Technologies AG 2008.

LEGAL DISCLAIMER

THE INFORMATION GIVEN IN THIS APPLICATION NOTE IS GIVEN AS A HINT FOR THE

IMPLEMENTATION OF THE INFINEON TECHNOLOGIES COMPONENT ONLY AND SHALL NOT BE

REGARDED AS ANY DESCRIPTION OR WARRANTY OF A CERTAIN FUNCTIONALITY, CONDITION OR

QUALITY OF THE INFINEON TECHNOLOGIES COMPONENT. THE RECIPIENT OF THIS APPLICATION

NOTE MUST VERIFY ANY FUNCTION DESCRIBED HEREIN IN THE REAL APPLICATION. INFINEON

TECHNOLOGIES HEREBY DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND

(INCLUDING WITHOUT LIMITATION WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL

PROPERTY RIGHTS OF ANY THIRD PARTY) WITH RESPECT TO ANY AND ALL INFORMATION GIVEN

IN THIS APPLICATION NOTE.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest

Infineon Technologies Office (

www.infineon.com

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

UConnect-CAN XE164 "Cookery Book"

AP08048

Revision History: 2008-05

Previous Version:

Page none

Subjects (major changes since last revision)

We Listen to Your Comments

Any information within this document that you feel is wrong, unclear or missing at all?

Your feedback will help us to continuously improve the quality of this document.

Please send your proposal (including a reference to this document) to:

[email protected]

AP16137

V2.0

Application Note 3 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Table of Contents Page

Note: Table of Contents see page 9 .

Introduction:

This “Appnote” is a Hands-On-Training / Cookery Book / step-by-step book.

It will help inexperienced users to get an UConnect-CAN XE164 up and running.

With this step-by-step book you should be able to get your first useful program in less than 2 hours.

The purpose of this document is to gain know-how of the microcontroller and the tool-chain.

Additionally, the "hello-world-example" can easily be expanded to suit your needs.

You can connect either a part of - or your entire application to the UConnect-CAN XE164.

You are also able to benchmark any of your algorithms to find out if the selected microcontroller fulfils all the required functions within the time frame needed.

Note:

The style used in this document focuses on working through this material as fast and easily as possible. That means there are full screenshots instead of dialog-window-screenshots; extensive use of colours and page breaks; and listed source-code is not formatted to ease copy & paste.

Have fun and enjoy the UConnect-CAN XE164!

Application Note 4 V2.0, 2008-05

Application Note 5

AP16137

UConnect-CAN XE164 "Cookery Book" s

V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Block Diagram (Source: XE164 UConnect Manual)

Application Note 6 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

SAFXE167 F-96F66L Block Diagram (Source: Product Marketing)

SAFXE164 F-96F66L Block Diagram (Source: Product Brief)

Note:

The XE164 microcontroller is a derivative of the XE167 microcontroller!

Application Note 7 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

SAFXE164 F-96F66L Block Diagram

(Source: DAvE)

XE16x Block Diagram (Source: User’s Manual)

Note:

Just by comparing the different sources of block diagrams, you should be able to get a complete picture of the microcontroller and to answer some of your initial questions.

Application Note 8 V2.0, 2008-05

Your

program:

AP16137

UConnect-CAN XE164 "Cookery Book"

“Cookery book“

For your first programming example for the UConnect-CAN XE164:

Chapter/

Step

1.)

*** Recipes ***

DAS Installation + Connecting the UConnect-CAN XE164

2.)

3.)

4.)

5.)

DAvE (program generator)

DAvE Installation (mothersystem) + DAvE Update Installation (XE16xx_Series.dip) for XE164

Using DAvE

Microcontroller initialization for your programming example

Using the KEIL Development Tools (C-Compiler)

Programming of your application (XE164) with the KEIL tool chain (µVision3)

Running your first programming example

Feedback

6.)

Feedback

Application Note 9 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

1.) DAS Installation + Connecting the UConnect-CAN XE164:

Application Note 10 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Screenshot of the UConnect-CAN XE164 Homepage: http://www.infineon.com/cms/en/product/channel.html?channel=db3a3043183a955501183c3446e1

006f

Note:

For further information, please refer to the XE164 UConnect Manual, V.1.0

For further information, please refer to the XE164 UConnect Manual, V.1.1

Application Note 11 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Install the Infineon DAS ( D e v i c e A c c e s s S e r v e r) Server:

Go to www.infineon.com/DAS :

Note:

The DAS Server must be installed on your host computer!

The goal of the DAS software is to provide one single interface for all types of tools.

The USB Device driver communicates with the UConnect-CAN XE164 when connected to the host computer.

The USB Device driver for the UConnect-CAN XE164 USB interface is included in the DAS software.

A virtual COM port driver is also included.

Application Note 12 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Download “The latest release version for download: DAS Edition v2.6.4”:

Unzip das_edition_v264.zip

and

Application Note 13 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

execute “ DAS_v264_setup.exe

” to install the DAS Server.

Application Note 14 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Click Finish

Application Note 15 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Connect the UConnect-CAN XE164 to the host computer:

USB Connection:

.) used for: UART communication (the USIC0_CH0/UART/RS232/serial interface is available via

USB as a virtual COM port of the second USB channel of the FTDI FT2232 Dual USB to

UART/JTAG interface).

.) used for: On-Chip-Flash-Programming and Debugging (first USB channel of the FTDI FT2232

Dual USB to UART/JTAG interface).

.) the USB connection works also as the power supply.

Note:

A USB driver is installed the first time while connecting the UConnect-CAN XE164 via USB to your host computer.

Note:

A default virtual COM Port is generated.

Application Note 16 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Using a Windows 2000 operating system, we are now going to search for the virtual COM Port which was generated after connecting our UConnect-CAN XE164:

Start – Settings – Control Panel

Application Note 17 V2.0, 2008-05

Double click: Administrative Tools

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 18 V2.0, 2008-05

Double click: Computer Management

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 19 V2.0, 2008-05

Click: Device Manager

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 20 V2.0, 2008-05

Expand: Ports (COM & LPT):

Expand: Universal Serial Bus controllers:

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

As we can see: our virtual COM Port for

UART/RS232 communication with the

UConnect-CAN XE164 via USB is

COM5 !

COM5

Application Note 21 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

2.) DAvE – Installation for XE16x microcontrollers

Install DAvE (mothersystem):

Download the DAvE-mothersystem setup.exe

@ http://www.infineon.com/DAvE and execute setup.exe

to install DAvE .

Note:

Abort the installation of Acrobat Reader.

Application Note 22 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Install the XE164 microcontroller support/update (XE16xx_Series.dip):

1.)

Download the DAvE-update-file ( .DIP

) for the required microcontroller

@ http://www.infineon.com/DAvE

Unzip the zip-file “ XE16xx_Series_v2[1].0.zip

” and save “ XE16xx_Series.dip

“

@ e.g

. C:\DAvE\XE16x-2008-05-29\ XE16xx_Series.dip

Application Note 23 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

2.)

Start DAvE - ( click )

3.)

View

Setup Wizard

Default:

• Installation

Forward>

Select:

•

I want to install products from the DAvE’s web site

Forward>

Select: C:\DAvE\XE16x-2008-05-29

Forward>

Select: Available Products click D XE16xx_Series

Forward>

Install

End

4.) DAvE is now ready to generate code for the XE16x microcontrollers.

Application Note 24 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

3.) DAvE - Microcontroller Initialization after Power-On:

Start the program generator DAvE and select the XE164 microcontroller:

File

New

16-Bit Microcontrollers

Select XE164F

Create

Application Note 25 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Choose the Project Settings as you can see in the following screenshots:

General: Controller Type: Type: check/select XE164F-96F66

General: Compiler Settings: Compiler: check/choose Keil

Note:

You can change file names (e.g. MAIN.C, MAIN.H) anytime.

Application Note 26 V2.0, 2008-05

System Clock: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Note (Source: DAvE):

Configuration of the System Clock:

- VCO clock used, input clock is connected

- input frequency is 8,00 MHz (XTAL1)

- configured system frequency is 66,00 MHz

- system clock is 66.00 MHz

Application Note 27 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Additional information: Clock System (Source: User’s Manual):

Clock Generation Unit (CGU) Block Diagram:

Note:

The CGU can convert a low-frequency external clock to a high-speed internal clock, or can create a high-speed internal clock without external input.

The system clock

SYS

is generated out of four selectable clocks:

• PLL clock f

PLL

• Wake-Up clock f

• The Direct Clock f

OSC

, from pin XTAL1

• Input DIRIN as Direct Clock Input f

DIR

Application Note 28 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Global Settings: (do nothing. Do not change configuration)

Application Note 29 V2.0, 2008-05

CPUCON1/VECSEG: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

We should not change the pipeline behaviour.

Application Note

Prefetch

Fetch

Decode

Address

Memory

Execute

Write Back

I n

I n-1

I n+1

I n n-1

CPU clock cycle

Prefetch Pipeline

I n+2

I n+1

I n+3 n+2

I n+3

Execution Pipeline

I n

I n-1

I n+1

I n

I n-1

I n+2

I n+1

I n

I n-1

I n+3

I n+2

I n+1

I n

I n-1

I n+3

I n+2

I n+1

I n

I n+3

I n+2

I n+1

30 V2.0, 2008-05

Additional information: Start from program memory (Source: User’s Manual):

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 31 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Notes: If you wish, you can insert your comments here.

Exit and Save this dialog now by clicking the close button:

Application Note 32 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Configuration of the serial interface “ASC0” / UART / USIC0_CH0 / U0C0:

The configuration window/dialog can be opened by clicking the specific block/module (USIC0).

Application Note 33 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Protocol: USIC0 Channel 0 Protocol Selection: USIC Protocol for U0C0: select ASC

Exit and Save this dialog now by clicking the close button.

Application Note 34 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Configuration of the serial interface USIC0_CH0 / U0C0:

The configuration window/dialog can be opened by clicking the specific block/module (CH 0).

Application Note 35 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

ASC General: Module Enable U0C0: click ; Enable module kernel clock and module functionality

ASC General: Pin Selection: Transmit (TxD): select P7.3

ASC General: Pin Selection: Receive (RxD): select P7.4

ASC General: Baud Rate: Required baud rate [kbaud]: insert 9,600 < ENTER >

Note (*1):

Validate each alphanumeric entry by pressing <ENTER> .

Application Note 36 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Additional information: RS232 serial interface:

Note:

The RS232 serial interface (USIC_0_Channel_0 pins P7.3 and P7.4) is available via the USB port which converts the TTL-UART-signals to USB-signals (using a virtual COM port of the second

USB channel of the FTDI FT2232 Dual USB to UART/JTAG interface).

USB port

Application Note 37 V2.0, 2008-05

Additional information: Standard UART Pins (Source: User’s Manual):

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 38 V2.0, 2008-05

Control: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 39 V2.0, 2008-05

FIFO: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 40 V2.0, 2008-05

Interrupts: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Group Priority 0 Î Group Priority 1 Î Group Priority 2 Î GroupPriority 3 Î

Note:

For the serial communication with a terminal program (e.g. Docklight, www.docklight.de) running on your host computer the myprintf function is used. The myprintf function uses Software-Polling-

Mode therefore we do not need to configure any interrupts.

Application Note 41 V2.0, 2008-05

Int. Extension: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Î Group Priority 4 Î Group Priority 5 Î Group Priority 6 Î GroupPriority 7

Application Note 42 V2.0, 2008-05

Bank Select: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

For our hello world program the 2 local register banks are not needed.

Application Note 43

DPRAM

local reg bank local reg bank

R15

R14

GPRs

global reg bank

R15

R14

GPRs

V2.0, 2008-05

PEC: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

For our hello world program the 8 PEC

Channels are not needed.

Application Note 44 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Functions: Initialization Function: click ; U0C0_ASC_vInit

Functions: Function Library (Part 1): click ; U0C0_ASC_vSendData

Functions: Function Library (Part 1): click ; U0C0_ASC_uwGetData

Functions: Function Library (Part 1): click ; U0C0_ASC_ubTxDataReady

Functions: Function Library (Part 1): click ; U0C0_ASC_ubTxBufFree

Functions: Function Library (Part 1): click ; U0C0_ASC_ubRxDataReady

Note:

You can change function names (e.g. U0C0_ASC_vInit) and file names (e.g. U0C0.C, U0C0.H) anytime.

Application Note 45 V2.0, 2008-05

Notes: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

Notes : If you wish, you can insert your comments here.

Exit and Save this dialog now by clicking the close button.

Application Note 46 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Configure Timer T7 in the CAPCOM 2 module:

The configuration window/dialog can be opened by clicking the specific block/module

(CAPCOM2).

Note:

The LED on IO_Port_2.7

will be blinking (if selected in the main menu) with a frequency of about 1 second (done in the Timer_7-Interrupt-Service-Routine).

Therefore we have to configure Timer_7.

Application Note 47 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Module Clock: CAPCOM2 Enable Module: click ~ Enable module

Application Note 48 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Control: Port Lock Control: click ~ The contents of the port register is not changed by the CAPCOM2 unit

Application Note 49 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Timer 7/8: Timer 7 Start Control: click 9 Start T7 after initialization (T7R)

Timer 7/8: Interrupt Control: click 9 Enable T7 interrupt (IE)

Timer 7/8: Timer 7 Input Selection (T7I): Prescaler: choose Module Clock/1024

Timer 7/8: Timer 7 Registers: Overflow [s]: insert 1 < ENTER >

Application Note 50 V2.0, 2008-05

Channels: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 51 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Interrupts: drag and drop the CC2 T7 INT to Interrupt Level 7, Group 0

Int. Extension: (do nothing)

Bank Select: (do nothing)

PEC: (do nothing)

Application Note 52 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Functions: Initialization Function: click/check ; CC2_vInit

Interrupt of Timer 7 is enabled

Parameters: (do nothing)

Notes: If you wish, you can insert your comments here.

Exit and Save this dialog now by clicking the close button.

Application Note 53 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Configure Port 2 Pin 7 to Output :

The configuration window/dialog can be opened by clicking the specific block/module (Port).

Note:

The LED is connected to IO_Port_2.7

Application Note 54 V2.0, 2008-05

Ports: click “Configure Port 2”

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 55 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Port 2: Functionality: click ; Use P2.7 as general IO Direction: click ~ Out

Application Note 56 V2.0, 2008-05

Input Characteristic: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 57 V2.0, 2008-05

Output Characteristic: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 58 V2.0, 2008-05

Parameters: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

We will use the name IO_P2_7 in application programming.

Notes: If you wish, you can insert your comments here.

Exit and Save this dialog now by clicking the close button:

Application Note 59 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Functions: Initialization Functions: click/check ; IO_vInit

Functions: Function Library (Part 1): click ; IO_ubReadPin

Functions: Function Library (Part 1): click ; IO_vSetPin

Functions: Function Library (Part 1): click ; IO_vResetPin

Functions: Function Library (Part 1): click ; IO_vTogglePin

Application Note 60 V2.0, 2008-05

Parameters: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Notes : If you wish, you can insert your comments here.

Exit and Save this dialog now by clicking the close button.

Application Note 61 V2.0, 2008-05

Save the project:

File

Save

Save project: Save in C:\XE164 (create new directory

File name: XE164

AP16137

UConnect-CAN XE164 "Cookery Book"

)

Save

Application Note 62 V2.0, 2008-05

Generate Code:

File

Generate Code

DAvE will show you all the files he has generated

(File Viewer opens automatically): or click

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 63 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

File Exit

Save changes?

Click:

Yes

Application Note 64

Generated files

V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

4.) Using the KEIL - µVision 3 Development Tools:

Install the tool chain: You can download the Keil Development Tools @ http://www.keil.com :

Download and Execute C166V611.EXE

( - or any higher version ) and install the Keil tool chain.

Application Note 65 V2.0, 2008-05

Start Keil µVision3 and open the DAvE Project:

If you see an open project – close it: Project Close Project

Project Open Project

Select Project File: Look in: choose C:\XE167 (1)

Select Project File: Files of type: select Dave Project Files (2)

Click XE167.dpt (3)

AP16137

UConnect-CAN XE164 "Cookery Book"

Click Open

Application Note 66 V2.0, 2008-05

Generate „make“- file:

Project – Rebuild all target files or

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

This step generates a makefile and shows the include files.

Application Note 67 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Configure :

Compiler, Assembler, Linker, Locater, Hex-Converter, Build – Control, Simulator, Debugger,

Listings and Utilities (e.g. OnChip Flash Programming): mouse position:

( Project Workspace , Files): Target1 click right mouse button click Options for Target ´Target1‘ or click

Project Workspace , Files

Application Note 68 V2.0, 2008-05

Device: check XE164F-96F

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 69 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Target: Clock(MHz): check 8.0

Target: tick/check

;

Use On-chip ROM

Target: tick/check

;

Use On-chip ROM

Target: tick/check

;

Use On-chip XRAM

Target: tick/check

;

Use On-chip XRAM

Note (Source: DAvE):

Configuration of the System Clock:

- VCO clock used, input clock is connected

- input frequency is 8,00 MHz

- configured system frequency is 66,00 MHz

- system clock is 66.00 MHz

Application Note 70 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Additional information: Memory Map (Source: User’s Manual):

Application Note 71 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Additional information: Memory Map (Source: User’s Manual):

Application Note 72

V2.0, 2008-05

Output: click ; Create HEX File

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

The HEX File could be used while working with the program

MEMTOOL for OnChip-Flash-Programming via RS232-interface [Bootstrap Loader (BSL) Mode via UART/USIC0_CH0].

Application Note 73 V2.0, 2008-05

Listing: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 74 V2.0, 2008-05

User: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 75 V2.0, 2008-05

C166: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 76 V2.0, 2008-05

EC++: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 77 V2.0, 2008-05

A166: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 78 V2.0, 2008-05

L166 Locate: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 79 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

L166 Misc: Interrupt Vector Table Address: insert 0x0C00000

Note:

The On Chip Flash starts here.

Application Note 80 V2.0, 2008-05

Debug: (do nothing)

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 81 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Utilities: Configure Flash Menu Command: check

~ Use Target Driver for Flash Programming

Utilities: Configure Flash Menu Command: select Infineon DAS Client for XC16x

Application Note 82 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Utilities: Configure Flash Menu Command: click Settings

Application Note 83 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Flash Download Options: Download Function: check: ; Erase

Flash Download Options: Download Function: check: ; Program

Flash Download Options: Download Function: check: ; Verify

Flash Download Options: Download Function: check: ; Reset and Run

Application Note 84 V2.0, 2008-05

Click Add

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 85 V2.0, 2008-05

Select: XE16x-96F On-chip Flash

AP16137

UConnect-CAN XE164 "Cookery Book"

Click Add

Application Note 86 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 87 V2.0, 2008-05

Insert your application specific program:

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

DAvE doesn’t change code which is inserted between ‘// USER CODE BEGIN’ and ‘//

USER CODE END’. Therefore, whenever adding code to DAvE’s generated code, write it between ‘// USER CODE BEGIN’ and ‘// USER CODE END’.

If you wish to change DAvE´s generated code or add code outside these ‘USER CODE’ sections you will have to insert/modify your changes each time after letting DAvE regenerate code!

Application Note 88 V2.0, 2008-05

Double click MAIN.C

and insert Global Variables: const char menu[] =

"\n\n\n"

"1 ... LED IO_Port_2.7 ON\n"

"2 ... LED IO_Port_2.7 OFF\n"

"3 ... LED IO_Port_2.7 blinking\n"

"\n"; volatile int RS232_wait=2; volatile bit blinking=ON; char select=' ';

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 89 V2.0, 2008-05

Double click MAIN.C

and insert the function input() : char input (void)

{

char in=' ';

{

myprintf("your choice: ");

in = (char)U0C0_ASC_uwGetData();

}while (in!='1' && in!= '2' && in != '3');

return in;

}

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 90 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Double click MAIN.C

and insert the following code in the main function:

while(RS232_wait);

Application Note 91 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Double click MAIN.C

and insert the following code in the main function into the while(1) loop:

myprintf(menu);

select=input();

switch (select)

{

case '1': blinking=OFF, IO_vResetPin(IO_P2_7), myprintf("\n*** LED IO_Port_2.7 ON

***\n"); break;

case '2': blinking=OFF, IO_vSetPin(IO_P2_7), myprintf("\n*** LED IO_Port_2.7 OFF

***\n"); break;

case '3': blinking=ON, myprintf("\n*** LED IO_Port_2.7 BLINKING ***\n"); break;

}

Application Note 92 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 93 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Additional information: Port Output Modification Register (Source: User’s Manual):

Application Note 94 V2.0, 2008-05

Double click Main.h

and insert the following Defines:

#define OFF 0

#define ON 1

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 95 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Double click Main.h

and insert extern declarations “Global Variables”: extern volatile int RS232_wait; extern volatile bit blinking;

Application Note 96 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Double click Main.h

and insert extern declarations “Global Functions”: extern void myprintf(const char *p);

Application Note 97 V2.0, 2008-05

Double click Main.h

and insert include files:

#include <stdio.h> // for sprintf (for myprintf)

#include <ctype.h>

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 98 V2.0, 2008-05

File – New

AP16137

UConnect-CAN XE164 "Cookery Book"

Insert :

#include "main.h" void myprintf(const char *p)

{

while(*p)

{

U0C0_ASC_vSendData(*p++);

}

// Example 1 (use of myprintf):

// ============================ void main(void)

{

myprintf("Hello World!\r\n");

}

// Example 2 (use of myprintf):

// ============================ char mb[200]; // message buffer for sprintf() void main(void)

{

int dummy;

sprintf(mb,"Variable dummy = %d",dummy); // Write formatted data to string mb

myprintf(mb);

}

Application Note 99 V2.0, 2008-05

File – Save As…

Insert: myprintf.c

AP16137

UConnect-CAN XE164 "Cookery Book"

Save

Application Note 100 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Mouse position: Project Window , User Files: click right mouse button click Add Files to Group ‘User Files’

Application Note 101 V2.0, 2008-05

Click myprintf.c

AP16137

UConnect-CAN XE164 "Cookery Book"

Add

Application Note 102 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 103 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Double click CC2.C

insert Code (CAPCOM 2 Timer 7 Interrupt Service Routine):

if(RS232_wait)

RS232_wait--;

if (blinking)

{

IO_vTogglePin(IO_P2_7);

}

Application Note 104 V2.0, 2008-05

Generate your application program:

Project – Rebuild all target files or

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 105 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

Programming is now complete.

Unfortunately it is not possible to test your program with the Keil Simulator because this feature is currently not supported.

Therefore we are going to load (On Chip Flash Programming) and run your program on the

UConnect-CAN XE164 in the next chapter.

Application Note 106 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

5.) Running your first programming example:

Make sure that the UConnect-CAN XE164 is still connected to the host computer:

USB Connection:

.) used for: UART communication (the USIC0_CH0/UART/RS232/serial interface is available via

USB as a virtual COM port of the second USB channel of the FTDI FT2232 Dual USB to

UART/JTAG interface).

.) used for: On-Chip-Flash-Programming and Debugging (first USB channel of the FTDI FT2232

Dual USB to UART/JTAG interface).

.) the USB connection works also as the power supply.

Application Note 107 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

Now we need a terminal program which is able to handle a virtual COM port (COM5)!

As an example of “any terminal program” we are going to use Docklight.

Docklight can be downloaded @ http://www.docklight.de

Application Note 108 V2.0, 2008-05

Now, start Docklight:

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 109 V2.0, 2008-05

Click : Project Settings

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 110 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Project Settings:

Communication: Communication Mode: click ~ Send/Receive

Project Settings:

Communication: Communication Mode: Send/Receive on comm. channel: select COM5

Project Settings: Communication: COM Port Settings: Baud Rate: select 9600

Project Settings: Communication: COM Port Settings: Parity: select None

Project Settings: Communication: COM Port Settings: Parity Error Char.: select (ignore)

Project Settings: Communication: COM Port Settings: Data Bits: select 8

Project Settings: Communication: COM Port Settings: Stop Bits: select 1

Application Note 111 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Project Settings: Flow Control: Flow Control Support: click ~ Off

Application Note 112 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Project Settings:

Communication Filter: Contents Filter: click ~ Show all original communication data

Application Note 113 V2.0, 2008-05

Click :

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 114 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Note:

Docklight is now ready for serial communication!

Application Note 115 V2.0, 2008-05

Go to µVision:

1.) click: 2.) click:

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 116 V2.0, 2008-05

Go to Docklight and see the result:

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 117 V2.0, 2008-05

Double click inside the red box:

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 118 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Edit Send Sequence: Sequence Definition : 1- Name : insert: 1 ... LED IO_Port_2.7 ON

Edit Send Sequence: Sequence Definition : 2- Sequence : insert: 1

Application Note 119 V2.0, 2008-05

Double click inside the red box:

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 120 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Edit Send Sequence: Sequence Definition : 1- Name : insert: 2 ... LED IO_Port_2.7 OFF

Edit Send Sequence: Sequence Definition : 2- Sequence : insert: 2

Application Note 121 V2.0, 2008-05

Double click inside the red box:

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 122 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Edit Send Sequence: Sequence Definition : 1- Name : insert: 3 ... LED IO_Port_2.7 blinking

Edit Send Sequence: Sequence Definition : 2- Sequence : insert: 3

Application Note 123 V2.0, 2008-05

Click

1 ... LED IO_Port_2.7 ON or

2 ... LED IO_Port_2.7 OFF or

3 ... LED IO_Port_2.7 blinking

AP16137

UConnect-CAN XE164 "Cookery Book"

and check the results on your UConnect-CAN XE164:

Application Note 124 V2.0, 2008-05

Now we close our project and µVision 3:

Project - Close Project

File

Exit

AP16137

UConnect-CAN XE164 "Cookery Book"

Application Note 125 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

Conclusion:

In this step-by-step book you have learned how to use the UConnect-CAN XE164 together with the

Keil tool chain.

Now you can easily expand your ”hello world” program to suit your needs!

You can connect either a part of - or your entire application to the UConnect-CAN XE164.

You are also able to benchmark any of your algorithms to find out if the selected microcontroller fulfils all the required functions within the time frame needed.

Have fun and enjoy working with XE16x microcontrollers!

Note:

There are step-by-step books for 8 bit microcontrollers (e.g. XC866 and XC888), 16 bit microcontrollers (e.g. C16x, XC16x and XE16x/XC2xxx) and 32 bit microcontrollers (e.g. TC1796 and TC1130).

All these step-by-step books use the same microcontroller resources and the same example code.

This means: configuration steps, function names and variable names are identical.

This should give you a good opportunity to get in touch with another Infineon microcontroller family or tool chain!

There are even more programming examples using the same style available [e.g. ADC-examples,

CAPCOM6-examples (e.g. BLDC-Motor, playing music), Simulator-examples, C++ examples] based on these step-by-step books.

Application Note 126 V2.0, 2008-05

AP16137

UConnect-CAN XE164 "Cookery Book"

6.) Feedback (UConnect-CAN XE164, Keil tools):

Your opinion, suggestions and/or criticisms

Contact Details

(this section may remain blank should you wish to offer feedback anonymously):

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

If you have any suggestions please send this sheet back to:

email:

[email protected]

FAX:

+43 (0) 4242 3020 5783

Your suggestions:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Application Note 127 V2.0, 2008-05

h t tp : / / w w w. in f in eo n . co m

Published by Infineon Technologies AG

નમસ્તે! હું એક AI ચેટબોટ છું જે ખાસ કરીને Infineon XE164 Microcontroller Application Note સાથે તમને સહાય કરવા માટે તાલીમ પામેલો છે. મેં દસ્તાવેજની સંપૂર્ણ સમીક્ષા કરી છે અને તમને જરૂરી ચોક્કસ માહિતી શોધવામાં અથવા સ્પષ્ટ અને સરળ શબ્દોમાં સામગ્રી સમજાવવામાં મદદ કરી શકું છું. પછી ભલે તમે ચોક્કસ સુવિધાઓ, મુશ્કેલીનિવારણ પગલાં અથવા સામાન્ય વપરાશ વિશે માર્ગદર્શન શોધી રહ્યા હોવ, તમારા પ્રશ્નો પૂછવા માટે નિઃસંકોચ રહો. તમે તમારી ચિંતાઓ અથવા જરૂરિયાતો વિશે જેટલી વધુ વિગતો પ્રદાન કરશો, તેટલી વધુ ચોક્કસ અને અસરકારક રીતે હું તમને સહાય કરી શકું છું!

સહાયક ટાઇપ કરી રહ્યા છે

સહાયક કીબોર્ડથી બહાર છે. કૃપા કરીને, પછીથી ફરી પ્રયાસ કરો.

એવું લાગે છે કે તમે એક એવા દસ્તાવેજ પર પહોંચી ગયા છો જે ઘણી ભાષાઓમાં લખાયેલ છે, જેમાં તમારી મૂળ ભાષા નથી. તમે તમારી પસંદગીની ભાષા વિનાના પૃષ્ઠોને અસ્થાયી રૂપે છુપાવવા માટે નીચેની લિંક્સનો ઉપયોગ કરી શકો છો.