042701 (24")

1

60cm(24")

: 042701

60

042701 (23.6")

TM M4x8 3PCS

6

75 75

Step 1:

Place a soft, cushioned material on top of a flat surface to prevent damaging the LED LCD screen.

Then place the TV monitor flat on top, with the screen side facing down, and attach the stand to the support column with the three supplied self-tapping screws, as illustrated on the right.

Step 2:

Fasten the two supplied flat head screws between the support column and the back cover, as illustrated on the right.

1 2 3 4 5 6 7 8 9

1. Remote sensor.

2. Power indicator.

3. POWER : Turn the TV on or off.

4. SOURCE : Select the input signal.

5. MENU : Press to select the main menu.

6. CH- : TV channel down.

7. CH+: TV channel up.

8. VOL- : Volume down.

9. VOL+ : Volume up.

1. DC 12V IN

2. HEADPHONE/audio out terminal.

3. PC AUDIO in terminal.

4. VGA input terminal.

5. YPBPR input terminal.

6. VIDEO input terminal.

7. AUDIO input terminal.

8. COAX digital output terminal.

9. TV antenna.

10. HDMI input terminal.

11. USB input terminal.

DC 12V

HEAD-

PHONE

OUT

PC

AUDIO

IN

VGA Y Pb Pr VIDEO R - IN - L

11

10

9

8

1 2 3 4

5

6

7

DC 12V

HEAD-

PHONE

OUT

PC

AUDIO

IN

VGA Y Pb Pr VIDEO R - IN - L

DC 12V

HEAD-

PHONE

OUT

PC

AUDIO

IN

VGA Y Pb Pr VIDEO R - IN - L

DC 12V

HEAD-

PHONE

OUT

PC

AUDIO

IN

VGA Y Pb Pr VIDEO R - IN - L

COAX ANT HDMI USB

DC 12V

HEAD-

PHONE

OUT

PC

AUDIO

IN

VGA Y Pb Pr VIDEO R - IN - L

COAX ANT HDMI USB

:T on or off.

tton to mute this key to s reo mode.

ASPE

CT: Press to adjust pictur e ratio.

PMO

DE: Select pi cture mode.

ound mode.

witch to a cha nnel using 0 - 9.

-/--:

S rogram digit.

:

Switch back the p rogram in M EDIA model

TV informati on.

: Press t o eject the D VD-disc in D VD mode previous cha nnels. Repea

:

(The USB drive is formatted when recording so make sure you do not have any important files stored on it).

t

AUTO

Adjusts the picture auto PC mode .

PROG

: S elects the DVD program.

INTRO

: Press this

DVD player only).

( Used with DVD player only).

AB

: S

RED,

Used for different menu options.

ep timer.

change sign al source.

selected opti ion or execut .

EXIT:

CH /

display).

T.SHI

FT: Press th

ANGL

: Select the for models ction only)

VOL

/VOL : Adj just the volume up/down.

multi-page pa ssage on scre ess this butto n to reveal th ttom or all of f page to rea information.

repeatedly

SOURCE

SOURCE

DVD

PC turn

Press the MENU button to display the main menu.

Press /

50

50

1.

Press / button to select the option that you want to adjust in the PICTURE menu.

2.

Press / button to adjust.

3.

previous menu.

Picture Mode

Press / button to select Picture Mode, then press the OK button to enter sub-menu.

Press /

You can change the value of contrast, brightness, color and sharpness when the picture is in Personal mode. TIP: You can press the PMODE button on the remote control to change the Picture Mode directly.

Brightness

Press / button to select Brightness, then press the OK button to enter sub-menu.

Contrast

Press / button to select Contrast, then press the OK button to enter sub-menu.

Sharpness

Press / button to select Sharpness, then press / button to adjust.

Saturation

Press / button to select Saturation, then press / button to adjust.

Hue

Use in compensating colour changes with the transmission in the NTSC system.

Colour Temp

Press /

/

/

/

21

AdvancedSettings

NR(Noise Reduction)

Press

/

(Available options: Off, Weak, Medium, Strong).

button to select.

MPEG NR(Noise Reduction)

Press

/

button to select MPEG NR(Noise Reduction), then press button to select. (Available options: Off, Weak, Medium, Strong).

Dynamic Contrast

Press

/

(Available options: Off, Weak, Medium, Strong).

button to select.

Press the MENU button to display the main menu.

Press /

1.

2.

3.

Press / button to select the option that you want to adjust in the SOUND menu.

Press /

menu.

button to adjust.

Sound Mode

Press / button to select Sound Mode, then press OK button to enter sub-menu.

Press /

You can change the Treble and Bass setting when the sound setting is in Personal mode.

Treble

Press / button to adjust.

/

Bass

Press / button to select Bass, then press OK button to enter sub-menu. Press / to adjust.

button

Balance

Press / button to select Balance, then press the OK button to enter sub-menu. Press / button to adjust.

Surround Sound

Press / button to select Surround Sound, then press /

EQ Setting

Press / button to select EQ Setting, then press the OK button to enter submenu.

AVL (Auto Volume Level)

Press / button to select AVL, then press Press /

SPDIF

Press /

/

Audio Description

Press / button to select Audio Description, then press the OK button to enter submenu.

Press the MENU button to display the main menu.

Press /

1.

Press / button to select the option that you want to adjust in the CHANNEL menu.

2.

Press / button to adjust.

previous menu.

Auto Scan

Press / button to select Auto Scan, then press the OK button to enter the sub-menu.

(The default password is 0000)

LCN OFF

25

Manual Scan

Press / button to select Manual Scan, then press Ok button to enter the submenu.

Digital

Digital Manual Scan

Press / button to select Digital Manual Scan, then press the OK button to enter submenu.

Analog Manual Scan

Press /

Channel Edit

Press / button to select Channel Edit, then press the OK button to enter submenu.

the channel list.

These three colored keys are the shortcut keys for programming

First press / to highlight the channel you want to delete or move or skip, then:

Press the

RED

button to delete the channel.

Press the

GREEN

button to skip the selected channel.

(Your TV set will skip the channel automatically when using CH+/- to view the channels.)

Press the

BLUE

button to set the channel to moving mode, then press / to move it to the

Signal Information

Press / button to select SignalInformation, then press the OK button to select the detailed information about the signal. Only available when there is a DTV signal.

29

Press the MENU button to display the main menu.

Press /

1.

Press / button to select the option that you want to adjust in the LOCK menu.

(Default Password: 0000)

2.

Press / button to adjust.

previous menu.

Enter Password

Press / button to select Enter Password, then press the OK button to make the following 4

Enable (Password)

Press / button to select Enable, then Press /

Channel Locks, Parental Rating and Lock Keypad are available when Enable is on.

Channel Locks

Press / button to select Channel Loc

Hotel Mode

Hotel Mode is a handy feature for use in shop displays or in situations where you want to lock certain functions - for instance loc

Press / button to select Hotel Mode, then press the OK button to enter submenu.

New Password

Press / button to select New Password, then enter a 4 digit number you want to set as

Clear Lock

Press / button to select Clear Lock, then press / button to select.

NOTE: The default password is “0000” (Administrator password is “4711”).

Press MENU button to display the main menu.

Press

/

Setup

OSD Language

Press / button to select OSD Language, then press OK button to enter submenu.

Press / / / button to select OSD language.

Auto Language

Press / button to select Auto Language, then press Ok button to enter submenu.

Press / / /

Language.

32

Subtitle

Press / button to sselect Subtitle,then press the OK button to enter submenu.

letext

Adj

Press / y available in DTV and ATVsources.

tton to enter submenu.

In DTVsource,press / button to select Digital Teletext Language.

In ATVsource,press / button to select Decoding Page Language.

Blue Screen

/ button to select Blue Screen,then press /

Mode Setting

Press /

/ /

button to select the Mode Setting.

Time Setting

Press / button to s.elect time setting then press the ok button to enter the submenu.

HDMI CEC Control

Press / button to select HDMI CEC Control, then press the OK button to enter submenu.

HDMI CEC

Press / button to select HDMI CEC Control, then press / button to select ON to make the following 3 options valid.

then press / Press /

CEC Menu Control

When selecting this option ,

Option

V will display the Home Menu of the connected CEC equipment.

Content

When selecting this option, V will display the Disc menu of the connected CEC equipment.

Device Menu

Press / button to select the Device List, then press the OK button to enter the submenu.

devices are connected to

34

PVR Setting

Press / button to select PVR SETTING, then press the OK button to enter submenu to check the USB.

FirstTimeSetup

Press / button to select First Time Setup, then press OK button to enter. (Default

Password is 0000).

Reset

Press / button to select Reset, then press the OK button to enter.

Select “Yes” if you want to reset the

TV to the factory settings.

Software Update (USB)

Use / button to select this option, then press the OK button to update software using USB.

programmes, content descriptions etc.) as well as schedule recordings and reminders.

Press the EPG button on the remote control to display the following interface.

displayed on screen advising the channel is about to be changed.

the start / end date and time if you wish. Press the OK button to return to the previous screen, or press the EXIT button to leave the interface.

Press the REC button to schedule the recording of the programme selected on the program list.

USB DeviceSetup

per below.

The set up will format the USB device, therefore all of the data stored the y recommend you save the content of your USB device to your PC before starting con ration.

Press MEN U button to access the PVR SETTINGS menu in

/ button and then press the OK button to select and access the DEVICE LIST interface.

Follow the next steps to format the USB device:

Use / button to select the disk partition that you wish to use for Recording and Timeshift functions, and then press the RED button to start formatting the selec ted partition.

Wait until the process ends and then press the EXIT button to exit the settings menu.The USB device will be ready to start using the Recording and Timeshift functions.

Timeshift

forwards in theTV transmission.

pause a live broadcast and move backwards or depend on the quality of the broadcasting and the free space on the USB device.

Press the PLAY button to start viewing the programme from the point it was paused, and use the remote keys assigned to the playback mode to perform play functions such as fast forward, rewind, pause, etc.

When watching aTV program inTimeshift mode, the following information will be displayed on the screen:

The progress bar on top of the information window shows the elapsed time in Blue and are displayed below the progress bar.

switch to another channel.

38

Instant Recording

V) input source.

start the Recording function press REC button on the remote control and the unit will start recording the current programme.The following information will be displayed at the left upper side of the screen:

In this interface, the time already recorded and the total recording time available on the USB disk are displayed.

nish the Recording function, press STOP button , or just switch to another channel.

Timer Recorder

Press the REC button to schedule the recording of the programme selected on the EPG programmes list. Follow the on-screen instructions to choose the recording frequency, vary return to the previous window, or press the EXIT button to exit the interface.

39

Playlist

Press the MENU button to access the PVR SETTINGS menu in the bmenu, from this menu you may play the recorded TV programs, as well as access the scheduled recordings list.

Press / buttons to choose the File Manager and press OK to access.Follow the on-screen instructions to play the TV programs stored. Press the MENU button to ret urn to the previous menu, or press the EXIT button to exit the interface.

Press / buttons to choose Scheduled Record and press OK to access. Use the / buttons to choose a group and follow the on-screen instructions to schedule a recording.

Press the MENU button to reutrn to the previous menu, or press the EXIT button to exit the interface.

/ YPbPr / PC

.

1 PC Settings in the PICTURE menu can be adjusted when the PC Source is selected.

he Screen Mode in the PICTURE menu and HDMI CEC Control section of the Setup

menu is available when the HDMI Source is selected only.

2.

Audio Description and Sou settings in the dio Menu are available only

when the DTV source is selected.

3.

There is no Channel menu available for the HDMI/AV/YPbPr/PC

4 Parantal Ratings and Channel Locks in the PARENTAL CONTROL menu are not

available for the HDMI/AV/YPbPr modes. Parental Ratings are not available for the

5.

Audio Languages, Subtit le & PVR Settings in the

CONTROL menu.

menu are not available in

AV/PC mode.

dio Languages, Subtit le, eletext & PVR Settings in the Menu

are not available in HDMI/YPbPr sources.

Before selecting the USB menu, plug in the USB device, then press the SOURCE button to set the input source to USB. Press / button to select the USB in the Source menu, then press the OK button to enter.

Press

/ button to select the option you want to adjust in the main USB menu, then press the OK button to select.

Photo

Press

/ button to press select.

Press / button to select USB drive you want to watch, then press the OK button to select.

Press /

Press the Exit button to go back to the previous menu.

Music

Press / button to select drive disk you want to watch, then press the OK button to enter.

Press /

Press the Exit button to go back to the previous menu.

When highlighting the option yo

Movie

Press / button to select MOVIE in the main menu, then press the OK button to enter.

Press / button to select drive disk you want to watch, then press the OK button to enter.

Press /

Press the Exit button to go back to the previous menu.

Text

Press / button to select drive disk you want to watch, then press OK button to enter.

Press /

When highlighting the option yo

General Audio Preference

- - General Setup Page - -

Display

TV

OSD Language

Screen Saver

Last Memory

Wide

Eng

On

64::93

1

Set Tv Display Mode

Gernal Setup

TV Display:

OSD Language:

Screen Saver:

Last Memory:

Set the TV display mode.

Set the OSD Language.

Set the screen saver.

Resume viewing from the last position on the DVD.

- - General Setup Page - -

Display

On

General Audio

Lt / Rt

Stereo

Preference

TV Display

Ang

OSD Language

Screen Saver

Last Memory

Audio Setup

Downmix:

Set Downmix Mode

General Audio Preference

- - Preference udio

TV Type

A

Subtitle

DiscMenu

Parental

Password

Default

Eng

Eng

AUTO TSC

N

Set Tv Standard

TV Type:

Audio:

Subtitle:

DiscMenu:

Parental:

Password:

Set the downmix mode.

Select the audio language.

Select the subtitle language.

Select the disc menu language.

Set the parental control.

Change the password.

(Default is 0000)

- - Preference udio

PAL

English

French erman

G

Italian

Spanish uguese

Preference Setup

Default: Load the factory settings.

Chapter

Title

All

O

%

52

53

54

042701

24”(60cm)

LED LCD

55

550x343x49.6mm

550x401x174mm

VESA 75 x 75

5 kg

56