Instant Pendant Light

Medium Base (PKN or PBN) Pendant

PACKAGE CONTENTS

Part

A

B

C

D

E

I

F

G

H

Description

Crossbar

Mounting screw

Wire Nut

Finial Nut

Canopy

Compression Nut

Socket Cup

Wire Cage

Socket Ring

Quantity

1

2

3

1

1

2

1

2

1

Style and finish will vary by item.

EEH

G

I

C

A

B

D

E

F

(Bulb Not Included)

Quueessttiioonnss,, pprroobblleem service department at 1-866-384-9400, 9 a.m.-5 p.m., EST, Monday-Friday . Include e-mail address if applicable .

1

IMPORT ANT SAFETY INFORMATION

to

As t

CEILING INSTALLATION & FIXTURE ASSEMBLY

1.

2.

5.

6.

3.

4.

7.

Pull out all wires(White, Black, and Ground) out of junction box.

Unscrew Compression Nut(F) from Canopy (E) and slide Canopy (E) down cord, Then unscrew Finial Nut(D) from the Crossbar(A). and slide the Crossbar(A) to suitable place to ease installation of Crossbar (A) to junction box.

Mount the Crossbar (A) to the junction box by using provided Mounting Screws (B) as shown

in the picture.

Using Wire Nuts (C) connect black wire from fixture to black wire from junction box. Connect white wire from fixture to white wire from junction box. Connect green wire of fixture to green or copper ground wire from the junction box. NOTE: Some junction boxes may not have a ground wire. In this case, attach green wire from the fixture to the ground screw located on

Crossbar (A), as shown in the picture.

Tuck wires back into junction box.

Screw Finial Nut (D) onto Crossbar, Slide Canopy (E) back up cord and against the ceiling, then use Compression Nut (F) to fix the Canopy (E), pls don't over tighten the Compression

Nut (F).

Attach Wire Cage (H) to Socket Cup (G) and then screw on the socket ring(I) clockwise untile tight.

wattage as indicated on label.

,

2