advertisement
2Z 126FL - 2Z 180FL
700131 - 700132
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197 www.bartscher.com
Version: 3.0
EN
2
Date of preparation: 2023-02-21
Original instruction manual
Explanation of Signal Words .................................................................... 2
Declaration of Conformity ........................................................................ 7
Functions of the Appliance ..................................................................... 11
List of Components of the Appliance ..................................................... 12
Safety Instructions for Cleaning ............................................................. 19
700131 1 / 24
EN
Safety
Diese Bedi enungsanlei tung besc hrei bt di e I nst allation, Bedi enung und Wart ung des G eräts und gilt als wic htige Infor mationsquelle und N achschl agewer k. Di e Kennt nis aller enthalt enen Sic herheits hinweis e und H andlungs anweis ungen schaf ft die Vorauss etz ung f ür das sichere und s ac hger echte Ar beit en mit dem G erät. D arüber hi naus müs sen die f ür den Ei ns atz ber eic h des G erät s gelt enden ör tlichen Unfall verhüt ungs vorsc hrift en und allgemeinen Sicherheits besti mmungen eing ehalt en wer den. Dies e Bedi enungs anleit ung is t Bes tandt eil des Produkts und muss i n unmi tt elbarer N ähe des Ger äts für das In¬s tall ations-, Bedi enungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬bewahrt werden. Wenn das Ger ät an eine dritt e Pers on weiterg egeben wird, muss die Bedi enungsanlei tung mit ausgehändigt wer den.
Read this instruction manual before using and keep it available at all times!
This instruction manual contains information about installation, operation and maintenance of the appliance and constitutes an important source of information and reference guide. The knowledge of all operational and safety instructions included in this manual is a prerequisite for safe and proper handling of the appliance. Additionally, accident prevention, occupational health and safety, and legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in an immediate vicinity of the appliance and be available at all times. The instruction manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards currently in force. However, the appliance may be a source of hazards if used improperly or contrary to its intended purpose. All persons using the appliance must consider information included in this instruction manual and observe safety instructions.
1.1
Explanation of Signal Words
Important safety instructions and warning information are indicated in this instruction manual with appropriate signal words. You must strictly follow the instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe injuries or death if the hazards are not avoided.
2 / 24 700131
Safety
WARNING!
The signal word WARNING warns against hazards that may lead to moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to light or moderate injuries if the hazards are not avoided.
, di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages, which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines for the user on usage of the appliance.
1.2
Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp edges.
• Do not bend, pinch nor knot the power cord.
700131 3 / 24
EN
EN
Safety
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
• Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers.
Inc orrect operati on of t he applianc e may c ause fire or explosi on haz ard due t o igniti on of its cont ent.
Fire hazard / flammable materials hazard / explosion hazard!
• Do not use any electric devices in the appliance.
• Do not store nor use petrol or other flammable liquids and gases in the vicinity of this or any other appliance. Those gases may cause fire or explosion hazard.
• Do not put into the appliance any explosive materials, like sprays filled with flammable propellants. Contents of containers filled with flammable gases and liquids may leak in low temperatures, and the contents may catch fire from sparks generated by an electric appliance. Explosion hazard!
• In the case of coolant leakage, pull the plug from the socket. Remove all sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
• Never use any flammable liquids for cleaning the appliance or its parts. Gases released may cause fire or explosion hazard.
• In the case of fire, disconnect the appliance from the power supply before attempting adequate fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the power supply. Following extinction of fire, ensure sufficient fresh air inflow.
• Defrosting process may not be sped up with mechanical means or heat energy sources (candles or heaters) nor with any other means. Vapour produced may cause short-circuit and too high temperatures may damage the appliance.
• All ventilation slots should not be obstructed during operation.
• Never attempt to damage cooling installation of the appliance.
Operating Personnel
• The appliance may only be operated by qualified personnel and trained specialist personnel.
• This appliance may not be operated by persons (including children) with limited physical, sensory or mental capabilities, nor by persons with limited experience and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or switching on the appliance.
4 / 24 700131
Safety
Improper Use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and allows for safe operation.
• The appliance may only be used when all connections are executed according to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your own.
• Do not introduce any changes in the appliance nor modify it.
• Do not drill hole in the appliance nor install any objects on it.
• Do not place any heavy objects on the appliance.
EN
700131 5 / 24
Safety
EN
1.3
Intended Use
As described below, every use of the appliance for a purpose differing and/or diverging from its intended standard use, is prohibited and considered to be an unintended use.
The following is an intended use:
– Cooling bottled wine.
1.4
Unintended Use
An unintended use may lead to personal injuries or property damages caused by hazardous voltage, fire or high temperature. The appliance may only be used to perform tasks described in this instruction manual.
The following is an unintended use:
– Storing flammable or explosive objects and liquids, such as ether, petroleum or adhesives;
– Storing explosive materials, like sprays filled with flammable propellants;
– Storing pharmaceutical products or preserved blood;
– Storing live pets.
6 / 24 700131
General information
2 General information
2.1
Liability and Warranty
All information and instructions in this instruction manual account for legal regulations in force, current level of technical engineering knowledge as well as our expertise and experience, developed over the years. If special models or additional options are ordered, or state-of-the-art technical solutions were implemented, the actual scope of delivery of the appliance may, in some circumstances, differ from descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for improvement of the appliance and its performance.
The warranty period for this appliance is 24 months, counted from the purchase date.
2.2
Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its other components are copyright protected. It is prohibited to reproduce this instruction manual (including its excerpts), in any form and by any means, and to use and/or transfer its content to third parties without manufacturer’s written permission. Violation of the above results in obligation to pay compensation. We reserve the right to claim further damages.
2.3
Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We may provide relevant Declaration of Conformity upon request.
EN
700131 7 / 24
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1
Delivery Check
Immediately upon reception, check the delivery for completeness and possible shipping damage. In the case of visible transport damage refuse to accept the appliance or accept it conditionally. Mark and note the scope of damage in shipping documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2
Packaging
Do not dispose of the appliance cardboard box. It may be used to store the appliance when relocating or when shipping the appliance to our service point in the case of any damages.
The packaging and its elements are made of recyclable materials. Particularly, these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3
Storage
Leave the packaging closed until installation of the appliance; observe external indications concerning method of placing and storage. Store the packaging in the following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the condition of the packaging and the parts regularly. If needed, replace the packaging with a new one.
8 / 24 700131
Technical Data
4 Technical Data
4.1
Technical Specifications
Version / Characteristics of Wine Coolers
• Cooling: compressor
• Insulation: thermal
• Temperature control: thermostatic
• Control:
– touch
– electronic
• Automatic defrost function
• Evaporation of condensed water
• Thermostat
• Digital display
• ON/OFF button
• Door type: leaf door, glass
• Right-hand side door, with no possibility for door hinge to be changed
• Type of glazing:
– double glazing
– insulating safety glass with UV filter
• Type of shelves:
– wooden shelves, on ball bearings
– outreach: 275 mm
• Lighting:
– LED
– can be switched separately per each temperature zone
• Appliance locked with a key
More information on the appliance is available in our website www.bartscher.com
or, pursuant to the Regulation (EU) 2019/2016, in our product data base at https://energy-label.ec.europa.eu/ . Enter article number for a given model.
EN
700131 9 / 24
EN
Technical Data
Name: Wine cooler 2Z 126FL
700131 Art. No.:
Material:
Total volume (top/bottom), in litres: steel, painted; glass
313 (138 / 175)
Total volume of bottles (top/bottom): 126 (54 / 72)
Number of temperature zones: 2
Temperature range, top, min.
–max., in °C: 5 - 20
Temperature range, bottom, min.
–max., in
°C:
5 - 20
Amount of coolant, in kg: R600a / 0,050
Ambient temperature, max., in °C:
Climate class:
Energy consumption, in kWh/year:
16 - 38
ST
180
Energy efficiency class:
Number of shelves, top/bottom:
Shelves dimensions (W x D), in mm:
Power supply:
G (EU Nr. 2019 / 2016)
3 / 4
1 x 505 x 340, 6 x 505 x 440
0,15 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm: 595 x 625 x 1.590
Weight in kg: 76,0
We reserve the right to implement technical modifications!
10 / 24 700131
Technical Data
Name: Wine cooler 2Z 180FL
700132 Art. No.:
Material: steel, painted; glass
Total volume (top/bottom), in litres:
Total volume of bottles (top/bottom):
453 (219 / 234)
180 (80 / 100)
Number of temperature zones: 2
Temperature range, top, min.
–max., in °C: 5 - 20
Temperature range, bottom, min.
–max., in
°C:
5 - 20
Amount of coolant, in kg: R600a / 0,050
Ambient temperature, max., in °C:
Climate class:
Energy consumption, in kWh/year:
16 - 38
ST
184
Energy efficiency class:
Number of shelves, top/bottom:
Shelves dimensions (W x D), in mm:
Power supply:
Dimensions (W x D x H), in mm:
Weight in kg:
G (EU Nr. 2019 / 2016)
4 / 4
1 x 505 x 425, 7 x 505 x 440
0,15 kW | 220-240 V | 50 Hz
600 x 750 x 1.860
86,4
We reserve the right to implement technical modifications!
4.2
Functions of the Appliance
The appliance is designed for cooling and storage of bottles of wine in restaurants and bars.
Individually adjustable temperature zones and glass pane with UV filter provide for optimum storage and presentation of white and red wine.
EN
700131 11 / 24
4.3
List of Components of the Appliance
Technical Data
EN
1. Upper hinge cover
3. Door frame (lockable)
5. Lock
7. Feet (3x)
9. Air inlet
11. Cold air outlet
13. Top control panel
2. Door seal
4. Door handle
6. Bottom hinge with a foot (heightadjustable)
8. Hot air outlet
10. Bottom control panel
12. Wooden shelves: 7 pcs (700131) /
8 pcs (700132)
14. Housing
12 / 24 700131
Technical Data
Auxiliary Equipment (not included in the delivery)
Wine display 2Z 126FL
Material: wood
Colour: pine-wood
Volume: max. 6 bottles
Presentation of bottles:
– horizontal
– angle approx. 25° (display setting)
Characteristics: exchangeable with shelves for wine cooler 2Z 126FL /
700131
Dimensions:
W 505 x D 438 x H 30 mm
Weight: 1.1 kg
Art. no. 700135
Wine display 2Z 180FL
Material: wood
Colour: pine-wood
Volume: max. 6 bottles
Presentation of bottles:
– horizontal
– angle approx. 25° (display setting)
Characteristics: exchangeable with shelves for wine cooler 2Z 180FL /
700132
Dimensions:
W 505 x D 530 x H 30 mm
Weight: 1.1 kg
Art. no. 700137
The delivery does not include decorations!
EN
700131 13 / 24
Installation and operation
5 Installation and operation
5.1
Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and shipment safeguards.
EN
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film slowly, so no glue residues are left. Remove any glue residues with the use of a suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the appliance.
•
Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no problems;
– easily accessible;
– well ventilated.
Nie nal eż y umies zcz ać urządz eni a w g orąc ym otoczeniu ani w pobliż u materiał ów łatwopalnyc h.
The appliance requir es s uf ficient airflow f or pr oper operation. Ass ure a mini mum later al cl ear anc e of t he appli ance of 10 c m.
Die Ö ff nungen am G erät niemals abdec ken oder bl oc ki eren.
•
•
• Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect power consumption, and restrict functions of the appliance, too.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y. The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y. The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
Nie nal eż y umies zcz ać urządz eni a w g orąc ym otoczeniu ani w pobliż u materiał ów łatwopalnyc h.
Die Ö ff nungen am G erät niemals abdec ken oder bl oc ki eren.
• Place the appliance so that sufficient air circulation is ensured. Do not block nor cover ventilation openings in the rear wall of the appliance.
• Leave at least 10 cm clearance from walls and other objects.
• Do not position the appliance in high humidity locations. Excessive humidity may cause rust and negatively influence the refrigerating efficiency of the device.
14 / 24 700131
Installation and operation
• The appliance should be installed only in rooms, in which ambient temperature falls within the range of 16 °C
– 38 °C.
Nie nal eż y umies zcz ać urządz eni a w g orąc ym otoczeniu ani w pobliż u materiał ów łatwopalnyc h.
The appliance requir es s uf ficient airflow f or pr oper operation. Ass ure a mini mum later al cl ear anc e of t he appli ance of 10 c m.
Die Ö ff nungen am G erät niemals abdec ken oder bl oc ki eren. •
• In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
• The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y. The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y. The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
• The appliance is delivered with 3 large feet and one height-adjustable foot.
Adjust the small foot to make the appliance stand straight and do not sway.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at least 12 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not reconnect the appliance to power supply for at least 15 minutes.
EN
700131 15 / 24
5.2
Operation
Fixing of Door Handle
Installation and operation
EN
1. Before the first use, fix the supplied stainless steel handle to the appliance door.
2. Move the rubber seal on the door internal side left or right to uncover the fixing holes.
3. Fix the handle to door with enclosed screws.
4. Then replace the seal in correct position.
Before the First Use
1. Before the first use, clean the appliance inside and outside, as well as accessories, using luke-warm water and a soft cloth. Additionally, follow instructions in section 6 'Cleaning' .
2. To end with, dry the appliance and accessories thoroughly.
3. insert wooden shelves into the appliance.
Wooden shelves:
Fig. 1
Intermediate shelf Lower shelf
The arrangement of wooden shelves depends on the size and type of bottles.
16 / 24 700131
Installation and operation
Each wooden shelf may be removed to allow for, e.g., the storage of larger bottles.
1. First, take bottles off of the wooden shelf.
2. Then, lift the wooden shelf slightly and pull it out (loosen the screws prior, should it be required).
NOTE!
Make sure that the wooden shelves are properly snapped before placing bottles on them. Pay attention to uniform distribution of load inside the appliance.
Control Elements and Display
Temperature increase button
Temperature decrease button
A Digital display
Internal LED lighting button
Appliance Start-up
ON/OFF button
1. Plug the appliance into a suitable single socket.
The temperature zones of the wine cooler are controlled independently with use of control elements.
2. Press the ON/OFF button in the top control panel.
The appliance and the top temperature zone will be switched on.
3. Press the ON/OFF button in the bottom control panel.
The bottom temperature zone will be switched on.
Digital displays show current internal temperature for a given temperature zone.
700131 17 / 24
EN
EN
Installation and operation
Settings
The and buttons make it possible to set the temperature between 5°C and 20°C in top and bottom temperature zone.
Our recommended temperature settings:
– for white wine: 6 °C – 10 °C
– for red wine 12 °C – 18 °C
1. In case of using both temperature zones, temperature in the top zone should be lower than in the bottom zone.
2. If only one zone is to be used, disconnect the bottom temperature zone with the
ON/OFF button in the bottom control panel.
3. Wait until the appliance reaches the pre-set temperature and put the wine bottles inside.
NOTE:
Keep in mind that in the case of maximum load of the appliance chambers it must work longer to reach the pre-set temperature.
4. By pressing two buttons — and — simultaneously for 5 seconds, it is possible to switch between °C and °F.
5. With the use of and buttons it is possible to adjust temperature every
1°C.
Temperature in the appliance depends on surrounding temperature, number of stored bottles, and pre-set temperature.
Moreover the appliance is equipped with heating, thus in the case of lower ambient temperatures, the appliance may maintain wine temperature at desired level.
Internal LED Lighting
The internal LED lighting may be switched on and off independently for each chamber. The LED lamp is located at a ceiling of each chamber.
1. To switch the internal LED lighting on or off, press the button in the respective control panel.
18 / 24 700131
Cleaning and Maintenance
Switching the Appliance Off
1. When the appliance is no longer used, switch it off using ON/OFF button on both control panels and then disconnect it from power supply (pull the plug out).
6 Cleaning and Maintenance
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in water or other liquids during cleaning. Do not clean the appliance with a pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp or pointed implements may damage the appliance, and when in contact with live parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive cleaning agents. They may damage the surface.
6.2
Cleaning
1. Clean the appliance regularly.
2. Before cleaning, remove bottles of wine from the appliance and store them temporarily in a cool room.
3. Pay attention to the following instructions for cleaning individual elements.
Appliance Interior
1. Clean the appliance interior with warm water, using gentle washing agent and a soft cloth.
2. Clean the wooden shelves with a soft, damp cloth. Remove them if necessary.
3. Then dry the cleaned surfaces thoroughly using a soft cloth.
Door Seal
1. Clean the door seal with a soft, damp cloth.
2. In order to assure correct closing and operation of the appliance, make sure that the door seal is clean.
EN
700131 19 / 24
EN
Cleaning and Maintenance
Housing
1. Clean the appliance exterior with a soft cloth, soaked in warm water and a gentle cleaning agent.
2. Then dry the appliance thoroughly with a soft cloth.
6.3
Maintenance
Extraction Opening/Fan
The cooling efficiency may be reduced due to accumulation of dust or other contaminants blocking the extraction openings.
1. Vacuum the extraction opening if necessary.
Condensate Tank (
K
)
1. Using a sponge, remove the condensed water from the condensate tank ( K ) regularly.
The condensate tank ( K ) is located at the rear wall of the appliance, bottom right.
Manual Defrosting
1. The appliance should be defrosted at least every half a year.
ATTENTION!
When the appliance door is often opened, defrosting should be performed more frequently.
2. Turn the appliance off and remove the plug from the socket.
3. Then start the manual defrosting.
4. Monitor the condensate tank (K) and remove the water accumulating during the defrosting process.
20 / 24 700131
Possible Malfunctions
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to malfunctions or errors during operation of the appliance. When malfunction cannot be removed, contact the technical service.
Error Possible Cause Solution
The appliance does not work.
Incorrectly connected plug. Remove the plug and insert it properly into the socket.
Electric power supply safety fuse damaged.
No power supply.
Check the fuse, connect the appliance to another socket.
Check electric power supply.
Damaged socket. Plug the appliance into another socket.
Damaged mains power plug.
Contact the service company.
Insufficient cooling power; the appliance does not reach preset temperature.
Temperature set incorrectly. Check the set temperature and change it if needed.
Door is not closed properly or it has been opened for too long.
Close the door tightly; limit the door opening time to minimum.
Damaged or deformed door seal.
Poor air circulation around the appliance.
Ambient temperature too high.
Contact the service company.
Keep sufficient distance from walls or other objects.
Ambient temperature in installation place should be in the range of 16°C – 38°C.
EN
700131 21 / 24
EN
Possible Malfunctions
Error Possible Cause Solution
Appliance is vibrating.
Appliance operates too loudly.
Door fails to close properly.
The appliance is not placed on even surface.
Loose elements (e.g. nuts/screws).
The appliance is not placed on even surface.
Appliance touches walls or other objects.
The appliance is not placed on even surface.
Place the appliance on even surface.
Check all screws and nuts, tighten them if necessary.
Place the appliance on even surface.
Keep sufficient distance from walls or other objects.
Place the appliance on even surface.
Door was fixed incorrectly. Contact the service company.
Worn door seal.
Wooden shelves slide off or are incorrectly set.
Contact the service company.
Fix the wooden shelves correctly in the internal chamber.
Contact the service company.
Digital display shows no indications.
Temperature controller is damaged.
Buttons are not working.
Damaged mains power plug.
Digital display shows
' Lo '.
Problem in the printed circuit.
Temperature controller is damaged.
Contact the service company.
Contact the service company.
22 / 24 700131
Possible Malfunctions
Error Possible Cause Solution
Compressor does not start.
Room temperature is lower than the set temperature.
Maintain temperature in the installation location.
Dew on the appliance's surface.
Condensate in the cooler.
Air humidity in installation location is too high.
Appliance door was open for a longer period or they are opened too frequently.
Remove dew using a soft cloth.
Keep them closed as long as possible.
E2 error.
The following phenomena are not malfunctions:
Contact the service company.
Various sounds that are generated by the appliance during operation are a normal phenomenon and do not indicate any malfunctions.
– Splashing, bubbling and hums are generated by the coolant that circulates the system.
– Short, louder whirring/hooting or clicking sounds may be heard when the compressor of the appliance starts for the pre-set temperature of the appliance internal chamber be restored.
EN
700131 23 / 24
EN
Disposal
8 Disposal
Electrical Appliance
Electric appliances are marked with this symbol. Electrical appliances must be disposed of and recycled in a correct and environmentally friendly manner. You must not dispose of electric appliances with household waste. Disconnect the appliance from the power supply and remove power cord from the appliance.
Electrical appliances should be returned to designated collection points.
Coolant
The propellant used in the appliance is flammable. It should be utilised pursuant to national regulations in force.
24 / 24 700131
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement