SCHUBERTH SP1 Carbon Fiber Racing Helmet User Guide
Add to My manuals1 Pages
SCHUBERTH SP1: Experience the pinnacle of motorcycle helmet technology. With its lightweight carbon fiber shell, this helmet offers unparalleled protection and comfort for the most discerning riders. Equipped with a state-of-the-art ventilation system, the SP1 ensures a constant flow of fresh air, keeping you cool and focused even on the hottest rides. Its anti-fog visor provides crystal-clear vision in all conditions, while the integrated sun visor allows for quick and easy adjustment to changing light conditions.
advertisement
SCHUBERTH SP1 CARBON FITMENT GUIDE
Selecting the right size of helmet is an important matter.
The best possible protection in the event of a fall or accident can only be assured if your helmet is the correct size.
Follow the steps below to determine the correct helmet for you:
Step 1: Measure your head size
Step 2: Determine the appropriate helmet size
Step 2: between both hands and move it up and down.
Try twisting the helmet.
1. MEASURE YOUR HEAD SIZE
width above the eyebrows, so that you obtain the largest circumference.
The value obtain is your head size in cm.
2. DETERMINE THE APPROPRIATE HELMET SIZE
The SP1 CARBON is available in seven basic helmet sizes. These are then divided into a total of 2 shell sizes.
Use the following overview to determine the helmet size best suited to your head size:
Head size, cm Alpha sizes helmet Helmet shell size
54
55
57
XS
S
M
1
58/59
60/61
62
63
L
L+
XL
XXL
2
3. CHECK THE FIT OF THE HELMET
With the helmet on and the chin strap fastened and correctly adjusted
(this is important; see page 12 for chin strap adjustment), check that your
Step 1: your head but are not pressing down: a) head pads b) cheek pads c) forehead pad
These movements should cause you to feel the skin of your face and scalp being moved by the movements of the helmet.
If the helmet moves about too easily, it is too big. Try a smaller size.
Step 3:
With the helmet on, grasp it by the chin to the rear. If you are able to do so, the helmet is too big or the chinstrap is too loose.
For your safety please use a smaller size and/or readjust the chin strap.
Step 4:
Grasp the rear of the helmet with both hands and try to rotate it forward over your head. this way, the chinstrap is too loose or the helmet is too large.
Readjust the chinstrap or if necessary select a smaller helmet size.
Warning: then the helmet is the right size for you. If however this is not the case, please repeat the process of selecting the correct size from Step 1 to determine whether this is in fact the correct size for you.
Attention:
Should you later be uncertain whether you have chosen the correct helmet, please contact SCHUBERTH customer services for advice.
advertisement
Related manuals
advertisement