Uconnect 6.5AN Owner's Manual Supplement

®

Uconnect

Owner’s Manual Supplement

SECTION

TABLE OF CONTENTS

PAGE

1

SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3

ALL ABOUT UCONNECT® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4

RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5

MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

6

UCONNECT® PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7

UCONNECT® 6.5AN VOICE RECOGNITION QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

8

NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

3

4

5

1

2

6

7

8

SAFETY GUIDELINES

CONTENTS

!

SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . .4

1

4 SAFETY GUIDELINES

SAFETY GUIDELINES

WARNING!

ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the

Uconnect® features and applications in this vehicle. Only use Uconnect® when it is safe to do so.

Failure to do so may result in an accident involving serious injury or death.

Ensure that all persons read this manual carefully before using the system. It contains instructions on how to use the system in a safe and effective manner.

Please read and follow these safety precautions. Failure to do so may result in injury or property damage.

• Glance at the screen only when safe to do so. If prolonged viewing of the screen is necessary, park in a safe location and set the parking brake.

• Stop use immediately if a problem occurs. Failure to do so may cause injury or damage to the product.

Return it to your authorized dealer to repair.

• Ensure that the volume level of the system is set to a level that still allows you to hear outside traffic and emergency vehicles.

Safe Usage Of The Uconnect® System

• Read all instructions in this manual carefully before using your system to ensure proper usage!

• Your system is a sophisticated electronic device. Do not let young children use your system.

• Permanent hearing loss may occur if you play your music or the system at loud volumes. Exercise caution when setting the volume on your system.

• Keep drinks, rain, and other sources of moisture away from your system. Besides damage to your system, moisture can cause electric shocks as with any electronic device.

NOTE:

Many features of this system are speed dependent.

For your own safety, it is not possible to use some of the touchscreen features while the vehicle is in motion.

SAFETY GUIDELINES 5

Touchscreen

• Do NOT attach any object to the touchscreen, doing

so can result in damage to the touchscreen.

• Do not touch the screen with any hard or sharp objects

(pen, USB stick, jewelry, etc.) which could scratch the touchscreen surface!

• Do not spray any liquid or caustic chemicals directly on the screen! Use a clean and dry micro fiber lens cleaning cloth in order to clean the touchscreen.

• If necessary, use a lint-free cloth dampened with a cleaning solution, such as isopropyl alcohol, or an isopropyl alcohol and water solution ratio of 50:50. Be sure to follow the solvent manufacturer’s precautions and directions.

1

6 SAFETY GUIDELINES

FCC Declaration

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Increase the separation between the equipment and receiver. - Consult an authorized dealer or an experienced radio technician for help.

Safety Information

Exposure To Radio Frequency Radiation

The radiated output power of the this internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner that the radio is 8 inches (20 cm) or further from the human body.

The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community.

SAFETY GUIDELINES 7

The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. However, the use of wireless radios may be restricted in some situations or environments, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio.

1

INTRODUCTION

CONTENTS

!

Uconnect® 6.5AN SYSTEM . . . . . . . . . . . . . . . . .10

2

10 INTRODUCTION

Uconnect® 6.5AN SYSTEM

1 — DISPLAY ON/OFF

Push the DISPLAY ON/OFF button located on the faceplate to turn the display ON or OFF.

2 — SETTINGS

Push the SETTINGS button located on the touchscreen to display the list of available settings.

3 — BACK

Push the BACK button to return to a previous menu or screen.

4 — ENTER/BROWSE & TUNE/SCROLL

Push the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/

SCROLL rotary knob to scroll through a list or tune a radio station.

INTRODUCTION 11

5 — APPS

Push the APPS button on the faceplate to access

Uconnect® Apps.

6 — PHONE

Push the PHONE button to access the Uconnect® Phone feature.

7 — NAV

Push the NAV button located on the faceplate to activate the Navigation feature.

8 — MEDIA

Pushing the MEDIA button will allow you to switch to

Media Mode (USB/iPod®, AUX, Bluetooth®).

2

12 INTRODUCTION

9 — RADIO

Push the RADIO button located on the faceplate to enter

Radio Mode. The different tuner modes; AM, FM and

SXM (If Equipped) can be selected by pushing the corresponding buttons in the Radio Mode.

10 — ON/VOLUME

Rotate the rotary knob to adjust the Volume. Push the

ON/VOLUME button to turn on the system. Push the

ON/VOLUME button a second time to turn off the system.

11 — MUTE

Push the MUTE button for activation/deactivation of the volume.

ALL ABOUT Uconnect®

CONTENTS

!

ALL ABOUT Uconnect® . . . . . . . . . . . . . . . . . . .14

▫

What Is Uconnect®? . . . . . . . . . . . . . . . . . . . .14

▫

Identify Your Radio . . . . . . . . . . . . . . . . . . . . .17

▫

Uconnect® Access via Mobile . . . . . . . . . . . . . .18

▫

Voice Text Reply . . . . . . . . . . . . . . . . . . . . . . .18

▫

Safety Guidelines . . . . . . . . . . . . . . . . . . . . . .25

3

14 ALL ABOUT Uconnect®

ALL ABOUT Uconnect®

What Is Uconnect®?

Before you drive, familiarize yourself with the easy-touse Uconnect® System.

• The Uconnect® Voice Command And Uconnect®

Phone Buttons On Your Steering Wheel

The buttons let you use your voice to give commands, make phone calls, respond to text messages handsfree, enter navigation destinations and control your radio and media devices.

1 — Push To Initiate Or To Answer A Phone Call, Send Or

Receive A Text

2 — Push To Begin Radio, Media And Navigation Functions

(Voice Recognition)

3 — Push To End Call

WARNING!




ALL ABOUT Uconnect® 15

3


1 — Uconnect® Phone Button

2 — Uconnect® Voice Command Button

3 — Uconnect® Phone Hang Up Button

4 — Volume/Mute Button

5 — Uconnect® 6.5AN Radio

6 — Tune or Scroll Knob/Browse or Enter Button

7 — Front Power Outlet

8 — Media Hub includes USB port and Audio Jack

9 — Steering Wheel Audio Controls (Right Rear Surface of Steering Wheel)

10 — Steering Wheel Audio Controls (Left Rear Surface of Steering Wheel)

Identify Your Radio

There are a few quick ways for you to identify your radio.

For a more complete description, please refer to the User

Guide in your glove box or visit DriveUconnect.com.

• The Uconnect® 6.5AN features a large 6.5 inch full color touchscreen.

• The Uconnect® 6.5AN will have the HD Radio icon when listening to FM or AM stations — If Equipped.

The icon will be lit when it is receiving an HD Radio signal (not all stations currently broadcast an HD

Radio signal).


3


Uconnect® Access via Mobile

Uconnect® Access via Mobile, which uses the Uconnect®

Access app and you smartphone’s data plan to access your personal Pandora®, iHeartRadio and Slacker accounts from the vehicle and enable their control using the touchscreen, is a late availability feature. Visit

DriveUconnect.com to check for availability and additional information.

Voice Text Reply

Description

Voice Text Reply provides 18 pre-defined messages you can send from your Uconnect® 6.5AN radio.

Voice Text Reply features are compatible with many newer Android and Blackberry phones. Before using, determine if your phone has been tested to support

Bluetooth® “Message Access Profile (MAP)” at

UconnectPhone.com. iPhone® and some other smartphones do not currently support Bluetooth® MAP. Ensure MAP is ON and incoming message notification is enabled.

How It Works

Set Up Your Phone To Work With Voice Reply

After pairing your phone to the vehicle using Bluetooth®

(see UconnectPhone.com), push the PHONE button on the faceplate to see the main Phone screen. A minute or so after a compatible MAP enabled phone has been

Bluetooth® connected to the vehicle; the “messaging” button on the touchscreen will change from gray to white. This is an indicator that Voice Text Reply will work with your phone. Outgoing Voice Text Replies may not be possible. The phone may allow incoming texts only.

Determine if your phone has been tested to support

Bluetooth® “Message Access Profile” (MAP) at

UconnectPhone.com. (Your phone may support Voice

Text Reply even if not found on this website. Check with your phone manufacturer to see if it supports MAP protocol.)


NOTE:

If phone supports MAP, then ensure MAP is on and incoming message notification is enabled, (see

UconnectPhone.com for phone specific instructions).

Generic Phone Setup Instructions (your phone’s setup process may be similar):

Follow the steps below to see if your phone can set up to work with Voice Text Reply.

1. On your phone select “Settings” (or the equivalent on your phone).

2. Select Wireless/Bluetooth® settings.

3. Ensure Bluetooth® is on (box checked).

4. Select Bluetooth® settings.

5. Select Advanced setting.

3


6. Ensure Message Access service is on (box checked).

7. Select Message Access settings.

8. Check the box for SMS.

9. Hit the back button twice to return to the Bluetooth® settings screen.

10. Check the box for Discoverable.

If a Bluetooth® authorization window appears showing your phone requesting permissions, check the box for

Always and press Accept.

To Reply To A Message With A Pre-Formatted Response (Voice Text Reply)

NOTE:

This function only operates while the vehicle is not in motion.

1. Press “View” next to the message.

2. Press “Reply”.

3. Select the pre-formatted response by pressing it

(“I can’t talk right now”).

4. Press “Send”.

Viewing Or Listening To Incoming Messages

To Listen to a Message from Radio

1. Push the #Phone# button on the steering wheel.


2. Say $Listen to message$ or press the #Listen# button on the touchscreen.

3


Viewing Your Messages

1. Push the “Phone” button on the steering wheel.

2. Say “View message.”

OR

Press “View” on the in-vehicle touchscreen.

Contact names or phone numbers of the message sender appears in a list along with View and Listen buttons on the touchscreen.

Viewing A Specific Message

1. Press “View” next to the contact name/phone number of the message you want to be displayed.

OR

Say “Show message n” n = the number of the message

Listening To A Message

1. Press “Listen” on the touchscreen or push the “Phone” button on the steering wheel and say “Listen,” the

Uconnect® system will read the received text message over the vehicle audio system.

Barge-In

Barge-in is a feature that enables a user to say a valid command without waiting for the system to finish speaking. When the system is “speaking” you can push the button on the steering wheel and say a valid command.

For example, if the system is explaining all of the options available after dictating a text message, at any time the user can press #Listen# on touchscreen or push the

#

Phone# button on the steering wheel and say #Listen.#

Requirements

• (MAP may not be compatible with Apple iPhones®

(pre iOS 6). Apple iOS 6 supports receiving text messages, but does not support sending text messages).

• Available on vehicles sold in the United States with a

Uconnect® 6.5AN (sales code RA4) radio.

• Vehicle and phone must be in range of the cellular network.

• Customer must have a properly paired and connected cellular device with Bluetooth® Message Access Profile (MAP) enabled. Voice Text Reply is compatible with many newer BlackBerry and Android mobile devices. Apple iOS 5 and earlier does not support

MAP. Apple iOS 6 supports receiving, not sending text messages. To check if your device has been tested to be compatible please visit UconnectPhone.com.


Disclaimers

• Not all Voice Text Reply features may be available on your phone.

• Your MAP supported phone must be paired and connected to a compatible Uconnect® radio.

• You must have an active cellular connection and be within cellular range to Voice Text Reply.

• FCA US LLC Uconnect® and its affiliates are not responsible for errant text messages.

• Vehicle must be registered with an active Uconnect®

Access trial or paid subscription.

3


WARNING!




FAQs

1. Can I still use Voice Text Reply if my phone is not

listed?

We are constantly testing phones and updating our compatibility database. If your phone is not listed, you may still be able to pair and connect your MAP supported phone to a compatible Uconnect® radio to see if all or most Voice Text Reply functions work.

Check your phone manufacturer if MAP is supported on your phone.

2. Can I use Voice Text Reply while in my other FCA

US LLC vehicle?

Other FCA US LLC vehicles do support hands free texting, but only with fixed responses.

3. Do I have to “train” my Uconnect® radio to my

voice?

FCA US LLC uses the latest voice recognition engine that provides good recognition without required training. This makes it easier for a passenger to also use the system.

4. Does Voice Text Reply work with accents? Speech isn’t perfect. Technology isn’t perfect. While FCA US

LLC strives to use the latest voice recognition engine, the technology may have difficulty with strong accents.


5. How many pre-formatted replies are there? You can respond with a set of up to 18 preset outgoing messages such as #I’ll call you later.” Refer to the

“Voice Recognition Quick Tips” section of this supplement.

6. Can I use Text Messaging if the “messaging” button

doesn’t turn white?

Only MAP compatible phones will work with Voice Text Reply. If your phone is compatible, the “messaging” light will turn white, after the phone is Bluetooth® connected, and you will then be able to do hands free Text Reply. The system will respond with “Sorry, I didn’t understand you” if you push the steering wheel “Phone” button and say a voice command for Text Reply, when the button isn’t active (“white”).

Safety Guidelines

WARNING!




Ensure that all persons read this manual carefully before using the radio system. It contains instructions on how to use the system in a safe and effective manner.

• Glance at the screen only when safe to do so. If prolonged viewing of the screen is required, park in a safe location and set the parking brake.

3


• Stop use of the system immediately if a problem occurs. Failure to do so may cause injury or damage to the product. Return it to your authorized dealer to repair.

• Ensure the volume level of the system is set to a level that still allows you to hear outside traffic and emergency vehicles.

Safe Usage Of The Uconnect® System

• Read all instructions in this manual carefully before using your system to ensure proper usage!

• Your system is a sophisticated electronic device. Do not let young children use your system.

• Permanent hearing loss or damage may occur if you play your music or otherwise operate the system at loud volumes. Exercise caution when setting the volume on your system.

NOTE:

Many features of this system are speed dependent. For your own safety, it is not possible to use some of the touchscreen features while the vehicle is in motion.

• Keep drinks, rain, and other sources of moisture away from your system. Besides damage to your system, moisture can cause electric shocks as with any electronic device.

Touchscreen

• Do not touch the screen with any hard or sharp objects

(pen, USB stick, jewelry, etc.) which could scratch the touchscreen surface!

• Do not spray any liquid or caustic chemicals directly on the screen! Use a clean and dry micro fiber lens cleaning cloth in order to clean the touchscreen.

• If necessary, use a lint-free cloth dampened with a cleaning solution, such as isopropyl alcohol, or an isopropyl alcohol and water solution ratio of 50:50. Be sure to follow the solvent manufacturer’s precautions and directions.

Disc Drive — If Equipped

• Do not insert any damaged, warped, scratched or dirty discs into the disc player.

• Discs that have been modified with an adhesive label should not be used in the CD/DVD player.

• Do not insert more than one disc at a time into the drive slot.


FCC Declaration

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Modifications not expressly approved by the radio manufacturer could void the user’s authority to operate the equipment.

3


NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver.

Consult the dealer or an experienced radio technician for help.

Safety Information

Exposure to Radio Frequency Radiation

The radiated output power of the internal wireless radio is far below the FCC radio frequency exposure limits.

Nevertheless, the wireless radio shall be used in such a manner that the radio is 20 cm or further from the human body.

The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones.

Device Connection And Audio Tips With Uconnect®

• More than one phone or device can be paired to your vehicle. The connected device with the highest priority will be used. To transition between devices, Select

Phone > Settings, then press the desired device.

• Multiple devices may be connected at one time. For example, a phone can be paired and connected for hands-free calling and texting, while a USB media source is connected for audio. However, only one

Bluetooth® connection can be used at a time.

• Phone calls will always have the highest priority regardless of which connection is active. For example, if an App is launched and the user receives a call, the user will be exited out of the App and returned to the App when the call ends.

• After all devices are connected/paired, when switching to a different audio source, audio will auto-play from the new source.


• Current audio (AM/FM/SXM/AUX) will continue to play when switching to a non-media type App.

• Phone calls will mute all audio except for NAV prompts if guidance is currently active (audio will resume after phone call is ended).

• All secondary incoming phone calls will be treated similar to “call waiting.”

• When connecting a second device via USB, that device will have priority and auto play accordingly. A phone that is already paired/connected will still be available for hands-free calling and texting.

• Incoming calls received while entering a nav destination (before pressing “Go”) will cancel the nav entry.

The user is required to start over when the phone call has ended.

3

RADIO MODE

CONTENTS

!

OPERATING RADIO MODE. . . . . . . . . . . . . . . .32

▫

Volume/Mute Control . . . . . . . . . . . . . . . . . . .32

▫

Tune/Scroll Control. . . . . . . . . . . . . . . . . . . . .32

▫

Screen Close . . . . . . . . . . . . . . . . . . . . . . . . . .33

▫

Seek And Direct Tune Functions . . . . . . . . . . . .33

▫

Direct Tune. . . . . . . . . . . . . . . . . . . . . . . . . . .34

▫

Setting Presets. . . . . . . . . . . . . . . . . . . . . . . . .35

▫

SiriusXM Satellite Radio Mode — If Equipped . .36

▫

Replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

▫

Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

▫

Browse In SXM . . . . . . . . . . . . . . . . . . . . . . . .40

▫

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

4

32 RADIO MODE

OPERATING RADIO MODE

The radio is equipped with the following modes:

• AM

• FM

• SiriusXM Satellite Radio (If Equipped)

Push the RADIO button to enter Radio Mode. The different tuner modes; AM, FM, and SXM, can then be selected by pressing the corresponding buttons in the

Radio mode.

Volume/Mute Control

Push the VOLUME/MUTE control knob to mute the radio. Push the VOLUME/MUTE control knob a second time to unmute the radio.

The electronic volume control turns continuously

(360 degrees) in either direction, without stopping. Turning the VOLUME/MUTE control knob clockwise increases the volume and counterclockwise decreases it.

Tune/Scroll Control

Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection.

Screen Close

The “X” button at the top right, provides a means to close the Direct Tune Screen. The Direct Tune Screen also auto closes if no activity occurs within 10 seconds.

Seek And Direct Tune Functions

The Seek Up and Seek Down functions are activated by pressing the “Double Arrow” buttons to the right and left of the radio station display, or by pushing the left “Steering Wheel Audio Control” (if equipped) up or down.

Seek Up

Press and release the “Seek Up” button to tune the radio to the next listenable station or channel. During a

Seek Up function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began.

RADIO MODE 33

Fast Seek Up

Press and hold the “Seek Up” button to advance the radio through the available stations or channels at a faster rate, the radio stops at the next available station or channel when the button is released.

Seek Down

Press and release the “Seek Down” button to tune the radio to the next listenable station or channel. During a

Seek Down function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began.

Fast Seek Down

Press and hold the “Seek Down” button to advance the radio through the available stations or channel at a faster rate, the radio stops at the next available station or channel when the button is released.

4

34 RADIO MODE

Direct Tune

Press the “Tune” button located at the bottom of the radio screen. The Direct Tune button screen is available in AM,

FM, and SXM radio modes and can be used to direct tune the radio to a desired station or channel.

Press the available number button to begin selecting a desired station. Once a number has been entered, any numbers that are no longer possible (stations that cannot be reached) will become deactivated/grayed out.

Undo

You can backspace an entry by pressing the bottom left

“Undo” button.

GO

When pressed, the green “GO” button allows you to commit an entry, at which time the radio will tune to the entered station or channel and close the Direct Tune

Screen.

The selected Station or Channel number is displayed in the Direct Tune text box.

Setting Presets

The Presets are available for all Radio Modes, and are activated by pressing any of the six “Preset” buttons on the touchscreen, located at the top of the screen.

When you are receiving a station that you wish to commit into memory, press and hold the desired numbered button on the touchscreen for more that two seconds or until you hear a confirmation beep.

The Radio stores up to 12 presets in each of the Radio modes. A set of 6 presets are visible at the top of the radio screen.

You can switch between the two radio presets by pressing the “arrow button” located in the upper right of the radio touchscreen.

RADIO MODE 35

Browse In AM/FM

When in either AM or FM, the Browse Screen provides a means to edit the Presets List and is entered by pushing the ENTER/BROWSE button.

Scrolling Preset List

Once in the Browse Presets screen, you can scroll the preset list by rotation of the TUNE/SCROLL knob, or by pressing the “Up and Down” arrow keys, located on the right of the screen.

Preset Selection From List

A Preset can be selected by pressing any of the listed

Presets, or by pushing the ENTER/BROWSE button on the TUNE/SCROLL knob to select the currently highlighted Preset.

When selected, the radio tunes to the station stored in the

Preset and returns to the main radio screen.

4

36 RADIO MODE

Deleting Presets

A Preset can be deleted in the Presets Browse screen by pressing the “Trash Can” icon for the corresponding

Preset.

Return To Main Radio Screen

You can return to the Main Radio Screen, by pressing the

“X” button on the touchscreen when in the Browse

Presets screen.

SiriusXM Satellite Radio Mode — If Equipped

SiriusXM Satellite Radio uses direct satellite-to-receiver broadcasting technology to provide clear, coast to coast radio content. SiriusXM is a subscription based service.

SiriusXM Premier

Get over 160 channels on your satellite radio, and enjoy all you want, all in one place. Hear commercial-free music plus sports, news, talk and entertainment. Get all the premium programming, including Howard Stern, every NFL game, Oprah Radio®, every MLB® and

NHL® game, every NASCAR® race, Martha Stewart and more. And get 20+ extra channels, including SiriusXM

Latino, offering 20 channels of commercial free music, news, talk, comedy, sports and more dedicated to Spanish language programming.

Go to siriusxm.com/getallaccess for more information.

SiriusXM services require subscriptions, sold separately after the 12-month trial included with your new vehicle purchase. If you decide to continue your service at the

end of your trial subscription, the plan you choose will automatically renew and bill at then-current rates until you call SiriusXM at 1-866-635-2349 to cancel.

See

SiriusXM Customer Agreement for complete terms at

www.siriusxm.com. All fees and programming subject to change. Our satellite service is available only to those at least 18 and older in the 48 contiguous USA and D.C.

Our SiriusXM satellite service is also available in PR

(with coverage limitations). Our Internet radio service is available throughout our satellite service area and in AK and HI. © 2014 SiriusXM Radio Inc. Sirius, XM and all related marks and logos are trademarks of Sirius XM

Radio Inc.

Service available in Canada; see www.siriusxm.ca.

This functionality is only available for radios equipped with a Satellite receiver. In order to receive satellite radio, the vehicle needs to be outside with a clear view to the sky.

If the screen shows Acquiring Signal, you might have to change the vehicle’s position in order to receive a signal.

In most cases, the satellite radio does not receive a signal in underground parking garages or tunnels.

RADIO MODE 37

No Subscription

Radios equipped with a Satellite receiver, require a subscription to the SiriusXM Service. When the Radio does not have the necessary subscription, the Radio is able to receive the Traffic/Weather channel only.

Acquiring SiriusXM Subscription

To activate the SiriusXM Satellite Radio subscription, call

1-800-643-2112 for U.S. residents and 1-877-438-9677 for

Canadian residents. You will need to provide the Sirius

ID (RID) located at the bottom of the Channel 0 screen.

The Satellite Mode is activated by a press of the “SXM” button on the touchscreen.

When in Satellite mode:

• The SXM button on the touchscreen is highlighted.

• The SiriusXM Presets are displayed at the top of the screen.

4

38 RADIO MODE

• The Genre is displayed below the Presets Bar.

• The SiriusXM Channel Number is displayed in the center.

• The Program Information is displayed at the bottom of the Channel Number.

• The SiriusXM function buttons on the touchscreens are displayed below the Program Information.

Tuning is done by operating the TUNE/SCROLL knob or by Direct Tune, similar to other Radio Bands, see Presets,

Browse, TUNE/SCROLL knob and Direct Tune.

In addition to the tuning Operation functions common to all Radio modes, the replay, Traffic/Weather Jump, and fav button functions are available in SiriusXM Mode.

Replay

The replay function provides a means to store and replay up to 22 minutes of music audio and 48 minutes of talk radio. Once the channel is switched, content in replay memory is lost.

Press the “Replay” button on the touchscreen. The play/ pause, rewind/forward and live buttons will display at the top of the screen, along with the replay time.

You can exit by pressing the “Replay” button on the touchscreen, any time during the Replay mode.

Play/Pause

Press the “Pause/Play” button on the touchscreen to pause the playing of live or rewound content at any time.

Play can be resumed again by pressing of the “Pause/

Play” button on the touchscreen.

Rewind

Press the “RW” button on the touchscreen to rewind the content in steps of five seconds. Pressing the “RW” button on the touchscreen for more than two seconds rewinds the content. The Radio begins playing the content at the point at which the press is released.

Forward

Each press of the “FW” button on the touchscreen forwards the content in steps of five seconds. Forwarding of the content can only be done when the content is previously rewound, and therefore, can not be done for live content. A continuous press of the “FW” button on the touchscreen also forwards the content. The Radio begins playing the content at the point at which the press is release.

RADIO MODE 39

Live

Press the “Live” button on the touchscreen to resume playing of Live content.

Favorites

Press the “fav.” button on the touchscreen to activate the favorites menu, which will time out in five seconds in absence of user interaction.

You can exit the Favorites Menu by a press of the “X” in the top right corner.

The favorites feature enables you to set a favorite artist, or song that is currently playing. The Radio then uses this information to alert you when either the favorite song, or favorite artist are being played at any time by any of the

SiriusXM Channels.

The maximum number of favorites that can be stored in the Radio is 50.

4

40 RADIO MODE

Fav. Artist:

While the song is playing to set a Favorite

Artist, press the “fav.” button on the touchscreen and then the Fav. Artist button on the touchscreen.

Fav. Song:

While the song is playing to set a Favorite

Song, press the “fav.” button on the touchscreen and then the Fav Song button on the touchscreen.

Browse In SXM

Press the “Browse” button on the touchscreen to edit

Presets, Favorites, Game Zone, and Jump settings, along with providing the SiriusXM Channel List.

This Screen contains many sub menus. You can exit a sub menu to return to a parent menu by pressing the “Back

Arrow.”

All

Press the “All” button at the left of the Browse Screen.

Channel List

Press the Channel List, or Genre, to display all the

SiriusXM Channel Numbers. You can scroll the Channel list by pressing the “Up and Down arrows”, located on the right side of the screen. Scrolling can also be done by operating the TUNE/SCROLL knob.

Genre

Press the “Genre” button on the touchscreen to display a list of Genres. You can select any desired Genre by pressing the “Genre” list, the Radio tunes to a channel with the content in the selected Genre.

Presets

Press the “Presets” button located at the left of the

Browse screen.

You can scroll the Presets list pressing the up and down arrows located at the right side of the screen. Scrolling can also be done by operating the TUNE/SCROLL Knob as well.

Preset Selection

A Preset can be selected by pressing any of the listed

“Presets”, or by pushing the ENTER/BROWSE button on the TUNE/SCROLL knob to select the currently highlighted Preset. When selected, the Radio tunes to the station stored in the Preset, and returns to the main Radio screen.

Deleting A Preset

A Preset can be deleted in the Presets Browse screen by pressing the “Trash Can” Icon for the corresponding

Preset.

RADIO MODE 41

Favorites

Press the “Favorites” button located at the left of the

Browse screen.

The Favorites menu provides a means to Edit the Favorites list and to configure the Alert Settings, along with providing a list of Channels currently airing any of the items in the Favorites list.

You can scroll the Favorites list by pressing the “Up and

Down” arrows located at the right side of the screen.

Scrolling can also be done by operating the TUNE/

SCROLL knob as well.

Remove Favorites

Press the “Remove Favorites” tab at the top of the screen.

Press the “Delete All” button on the touchscreen to delete all of the Favorites or press the “Trash Can” icon next to the Favorite to be deleted.

4

42 RADIO MODE

Alert Settings

Press the “Alert Setting” tab at the top of the screen. The

Alert Settings menu allows you to choose from a Visual alert or Audible and Visual alert when one of your favorites is airing on any of the SiriusXM channels.

Game Zone

Press the “Game Zone” button, located at the left of the

Browse screen. This feature provides you with the ability to select teams, edit the selection, and set alerts.

On Air

Press the “On-Air” tab at the top of the screen. The

On-Air list provides a list of Channels currently airing any of the items in the Selections list, and pressing any of the items in the list tunes the radio to that channel.

Select Teams

Press the “Select Teams” button on the touchscreen to activate the League Scroll list. Press the chosen league and a scroll list of all teams within the league will appear, then you can select a team by pressing the corresponding box. A check mark appears for all teams that are chosen.

Remove Selection

Press the “Remove Selection” tab at the top of the screen.

Press the “Delete All” button on the touchscreen to delete all of the Selections or press the “Trash Can Icon” next to the Selection to be deleted.

RADIO MODE 43

Alert Settings

Press the “Alert Setting” tab at the top of the screen. The

Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update” or both when one or more of your selections is airing on any of the SiriusXM channels.

Audio

Press the “Audio” button to activate the Audio settings screen to adjust Balance\Fade, Equalizer and Speed

Adjusted Volume.

You can return to the Radio screen by pressing the “X” located at the top right.

Balance/Fade

Press the “Balance/Fade” button to Balance audio between the front speakers or fade the audio between the rear and front speakers.

Pressing the “Front, Rear, Left or Right” buttons or press and drag the blue “Speaker” icon to adjust the Balance/

Fade.

4

44 RADIO MODE

Equalizer Speed Adjusted Volume — If Equipped

Press the “Equalizer” button to activate the Equalizer screen.

Press the “+ or –” buttons, or by pressing and dragging over the “level bar” for each of the equalizer bands. The level value, which spans between ±9, is displayed at the bottom of each of the Bands.

Press the “Speed Adjusted Volume” button to activate the

Speed Adjusted Volume screen.

RADIO MODE 45

The Speed Adjusted Volume is adjusted by pressing the

“Off, 1, 2 or 3.” This alters the automatic adjustment of the audio volume with variation to vehicle speed. Volume increases automatically as speed increase to compensate for normal road noise.

AUX Volume Offset

Press the “Aux Volume Offset” button to access the offset screen.

To adjust the amount of radio volume compensation.

Press the “+ or –” buttons, or press and drag over the

“level bar”.

4

46 RADIO MODE

Auto-On Radio

Press the “On” button to activate the Auto-On Radio feature. Press “Off” button to deactivate this feature.

Press the “Recall Last” button to recall the last radio setting, whether the radio was on or off at the last ignition OFF.

MEDIA MODE

CONTENTS

!

OPERATING MEDIA MODE. . . . . . . . . . . . . . . .48

▫

USB/iPod® Mode . . . . . . . . . . . . . . . . . . . . . .48

▫

AUX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .50

▫

Bluetooth® Mode . . . . . . . . . . . . . . . . . . . . . .51

5

48 MEDIA MODE

OPERATING MEDIA MODE

USB/iPod® Mode

Overview

USB/iPod® Mode is entered by either inserting a USB device or iPod® and cable into the USB Port or push the

MEDIA button and then press the “iPod®” button on the display.

Seek Up/Down

Press and release the “Seek Up” button for the next selection on the USB device/iPod®. Press and release the

“Seek Down” button to return to the beginning of the current selection, or return to the beginning of the previous selection if the USB device/iPod® is within the first second of the current selection.

Browse

Press the “Browse” button to display the browse window.

The left side of the browse window displays a list of ways you can browse through the contents of the USB device/iPod®. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc.

Press the desired button on the left side of the screen. The center of the browse window shows items and it’s sub-functions, which can be scrolled by pressing the “Up and Down” buttons to the right. The TUNE/SCROLL knob can also be used to scroll.

Source

Press the “Select Source” button to select the desired audio source, USB/iPod®, SD Card, AUX or Bluetooth®.

This screen will time out after a few seconds and return to the main radio screen if no selection is made.

MEDIA MODE 49

Repeat

Press the “Repeat” button to toggle the repeat functionality. The Repeat button is highlighted when active. The

Radio will continue to play the current track, repeatedly, as long as the repeat is active.

Shuffle

Press the “Shuffle” button to play the selections on the

USB/iPod® device in random order to provide an interesting change of pace. Press the button a second time to turn this feature off.

Info

Press the “Info” button to display the current track information. Press the “Info” button a second time to cancel this feature.

5

50 MEDIA MODE

Tracks

Press the “trks” button to display a pop up with the Song

List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the

Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then press the ENTER/

BROWSE knob to start playing that track.

Pressing the “trks” button while the pop up is displayed will close the pop up.

Audio

Refer to Radio Mode for adjusting the audio settings.

AUX Mode

Overview

AUX Mode is entered by inserting an AUX device using a cable with a 3.5 mm audio jack into the AUX port or push the MEDIA button and then press the AUX button on the display.

Inserting Auxiliary Device

Gently insert the Auxiliary device cable into the AUX

Port. If you insert an Auxiliary device with the ignition

ON and the radio ON, the unit will switch to AUX mode and begin to play when you insert the device cable.

Controlling The Auxiliary Device

The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume with the VOLUME/MUTE rotary knob, or with the volume of the attached device.

NOTE:

The vehicle radio unit is acting as the amplifier for audio output from the Auxiliary device. Therefore if the volume control on the Auxiliary device is set too low, there will be insufficient audio signal for the radio unit to play the music on the device.

MEDIA MODE 51

Source

Press the “Select Source” button to select the desired audio source, USB/iPod®, SD Card, AUX or Bluetooth®.

This screen will time out after a few seconds and return to the main radio screen if no selection is made.

Audio


Bluetooth® Mode

Overview

Bluetooth® Streaming Audio (BTSA) or Bluetooth®

Mode is entered by pairing a Bluetooth® device, containing music, to the Uconnect® System.

Before proceeding, the Bluetooth® device must be paired to the Uconnect® Phone to communicate with the

Uconnect® System.

5

52 MEDIA MODE

NOTE:

See the pairing procedure in the Uconnect®

Phone section for more details.

To access Bluetooth® mode, press the Bluetooth® button on the left side of the display.

Seek Up/Down

Press and release the “Seek Up” button on the touchscreen for the next selection on the Bluetooth® device.

Press and release the “Seek Down” button on the touchscreen to return to the beginning of the current selection, or return to the beginning of the previous selection if the Bluetooth® device is within the first second of the current selection.

Source

Press the “Select Source” button on the touchscreen to select the desired audio source, USB/iPod®, SD Card,

AUX or Bluetooth®. This screen will time out after a few seconds and return to the main radio screen if no selection is made.

Tracks

If the Bluetooth® device supports this feature, press the

“trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by a blue arrow and lines above and below the song title.

Pressing the trks button on the touchscreen while the pop up is displayed will close the pop up.

Audio


MEDIA MODE 53

5

Uconnect® PHONE

CONTENTS

!

OPERATING Uconnect® PHONE . . . . . . . . . . . .56

▫

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

▫

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

▫

Phone Call Features . . . . . . . . . . . . . . . . . . . .69

▫

Uconnect® Phone Features . . . . . . . . . . . . . . .74

▫

Advanced Phone Connectivity . . . . . . . . . . . . .77

▫

Things You Should Know About Your Uconnect®

Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

▫

General Information . . . . . . . . . . . . . . . . . . . .82

6

56 Uconnect® PHONE

OPERATING Uconnect® PHONE

Overview

Uconnect® Phone is a voice-activated, hands-free, invehicle communications system. Uconnect® Phone allows you to dial a phone number with your mobile phone.

Uconnect® Phone supports the following features:

Voice Activated Features:

• Hands-Free dialing via Voice (“Call John Smith Mobile” or, “Dial 248-555-1212”).

• Hands-Free text to speech listening of your incoming

SMS messages.

• Hands-Free Text Message Reply. (Forward one of 18 pre-defined SMS messages to incoming calls/text messages).

• Redialing last dialed numbers (“Redial”).

• Calling Back the last incoming call number (“Call

Back”).

• View Call logs on screen (“Show incoming calls,”

“Show Outgoing calls,” “Show missed Calls,” “Show

Recent Calls”).

• Searching Contacts phone number (“Search for John

Smith Mobile”).

NOTE:

Examples of Voice Commands and Voice Text

Reply are provided throughout this manual. For quick use, go to the Voice Command Quick Tips Section.

Screen Activated Features

• Dialing via Keypad using touchscreen.

• Viewing and Calling contacts from Phonebooks displayed on the touchscreen.

• Setting Favorite Contact Phone numbers so the are easily accessible on the Main Phone screen.

• Viewing and Calling contacts from Recent Call logs.

• Reviewing your recent Incoming SMS.

• Listen to Music on your Bluetooth® Device via the touchscreen.

• Pairing up to 10 phones/audio devices for easy access to connect to them quickly.

NOTE:

Your phone must be capable of SMS messaging via Bluetooth® for messaging features to work properly.

Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect® Phone.

For Uconnect® customer support:

• U.S. residents - visit UconnectPhone.com or call

1-877-855-8400

• Canadian residents - UconnectPhone.com or call

1-800-465-2001 (English) or 1-800-387-9983 (French)

Uconnect® PHONE 57

Uconnect® Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation.

WARNING!

ALWAYS drive safely and obey all applicable laws. You should only use Uconnect® features when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.

The Uconnect® Phone is driven through your Bluetooth®

“Hands-Free Profile” mobile phone. Uconnect® features

Bluetooth® technology - the global standard that enables different electronic devices to connect to each other without wires or a docking station, so Uconnect® Phone works no matter where you stow your mobile phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s Uconnect® Phone. The

6


Uconnect® Phone allows up to ten mobile phones or audio devices to be linked to the system. Only one linked (or paired) mobile phone and one audio device can be used with the system at a time.

Uconnect® Phone Button

The Uconnect® Phone button on your steering wheel is used to get into the phone mode and make calls, show recent, incoming, outgoing calls, view phonebook etc., When you press the button you will hear a BEEP. The beep is your signal to give a command.

Uconnect® Voice Command Button

The Uconnect® Voice Command button on your steering wheel is only used for “barge in” and when you are already in a call and you want to send Tones or make another call.

The button on your steering wheel is also used to access the Voice Commands for the Uconnect® Voice

Command features if your vehicle is equipped. Please see the Uconnect® Voice Command section for direction on how to use the button.

The Uconnect® Phone is fully integrated with the vehicle’s audio system. The volume of the Uconnect® Phone can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped.

Operation

Voice commands can be used to operate the Uconnect®

Phone and to navigate through the Uconnect® Phone menu structure. Voice commands are required after most

Uconnect® Phone prompts. There are two general methods for how Voice Command works:

1. Say compound commands like “Call John Smith mobile.”

2. Say the individual commands and allow the system to guide you to complete the task.

You will be prompted for a specific command and then guided through the available options.

• Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another prompt.


• For certain operations, compound commands can be used. For example, instead of saying “Call” and then

“John Smith” and then “mobile,” the following compound command can be said: “Call John Smith mobile.”

• For each feature explanation in this section, only the compound command form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the compound command form voice command “Search for John Smith,” or you can break the compound command form into two voice commands: “Search Contact” and when asked

“John Smith.” Please remember, the Uconnect® Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/ meters away from you.

6


Natural Speech

Your Uconnect® Phone Voice system uses a Natural

Language Voice Recognition (VR) engine.

Natural speech allows the user to speak commands in phrases or complete sentences. The system filters out certain non-word utterances and sounds such as “ah” and “eh.” The system handles fill-in words such as

“I would like to.”

The system handles multiple inputs in the same phrase or sentence such as “make a phone call” and “to Kelly

Smith.” For multiple inputs in the same phrase or sentence, the system identifies the topic or context and provides the associated follow-up prompt such as “Who do you want to call?” in the case where a phone call was requested but the specific name was not recognized.

The system utilizes continuous dialog; when the system requires more information from the user it will ask a question to which the user can respond without pushing the “Voice Command” button on your steering wheel.

Help Command

If you need assistance at any prompt, or if you want to know your options at any prompt, say “Help” following the beep.

To activate the Uconnect® Phone from idle, simply push the Phone begin with a push of the Phone control head.

button on your steering wheel and say a command or say “help.” All Uconnect® Phone sessions button on the radio


Cancel Command

At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu.

You can also push the Phone or Voice Command button on your steering wheel when the system is listening for a command and be returned to the main or previous menu.

Pair (Link) Uconnect® Phone To A Mobile Phone

To begin using your Uconnect® Phone, you must pair your compatible Bluetooth® enabled mobile phone.

To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The

Uconnect® website may also provide detailed instructions for pairing.

NOTE:

• You must have Bluetooth® enabled on your phone to complete this procedure.

• The vehicle must be in PARK.

6


1. Press the “Phone” button on the touchscreen to begin.

2. If there is no phone currently connected with the system, a pop-up will appear.

3. Select Yes to begin the pairing process. Then search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® screen.

• If No is selected, press the “Settings” button from the

Uconnect® Phone main screen,

• Press the “Add Device” button.

• Search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the

Uconnect® screen,

• See Step 4 to complete the process.

4. Uconnect® Phone will display an in progress screen while the system is connecting.

5. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting Yes will make this phone the highest priority. This phone will take precedence over other paired phones within range.

Pair Additional Mobile Phones

• Press the “Settings” button on the touchscreen from the Phone main screen.

• Next press the “Phone/Bluetooth®” button on the touchscreen.

• Press the “Add Device” button on the touchscreen.

• Search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® screen.

• Uconnect® Phone will display an in process screen while the system is connecting.


• When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting Yes will make this phone the highest priority. This phone will take precedence over other paired phones within range.

NOTE:

For phones which are not made a favorite, the phone priority is determined by the order in which it was paired. The latest phone paired will have the higher priority.

You can also use the following VR commands to bring up the Paired Phone screen from any screen on the radio:

• “Show Paired Phones” or

• “Connect My Phone”

6


Pair A Bluetooth® Streaming Audio Device

1. Press the “Media” button on the touchscreen to begin.

2. Change the Source to Bluetooth®.

3. Press the “Bluetooth®” button on the touchscreen to display the Paired Audio Devices screen.

4. Press the “Add Device” button on the touchscreen.

NOTE:

If there is no device currently connected with the system, a pop-up will appear.

5. Search for available devices on your Bluetooth® enabled audio device. When prompted on the device, enter the PIN shown on the Uconnect® screen.

6. Uconnect® Phone will display an in process screen while the system is connecting.

7. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device. Selecting Yes will make this device the highest priority. This device will take precedence over other paired devices within range.

NOTE:

For devices which are not made a favorite, the device priority is determined by the order in which it was paired. The latest device paired will have the higher priority.

You can also use the following VR command to bring up a list of paired audio devices.

• “Show Paired Phones” or

• “Connect My Phone”

Connecting To A Particular Mobile Phone Or

Audio Device After Pairing

Uconnect® Phone will automatically connect to the highest priority paired phone and/or Audio Device within range. If you need to choose a particular phone or Audio

Device follow these steps:

1. Press the “Settings” button on the touchscreen.

2. Press the “Paired Phones” or “Paired Audio Sources” button on the touchscreen.

3. Press to select the particular Phone or the particular

Audio Device.

4. Press the “X” to exit out of the Settings screen.


Disconnecting A Phone Or Audio Device


2. Press the “Paired Phones” or “Paired Audio Devices” button on the touchscreen.

3. Press the settings icon button located to the right of the device name.

4. The options pop-up will be displayed.

5. Press the “Disconnect Device” button on the touchscreen.


6


Deleting A Phone Or Audio Device


2. Press the “Pair Phones” or “Paired Audio Devices” button on the touchscreen.

3. Press the settings icon button located to the right of the device name for a different Phone or Audio Device than the currently connected device.


5. Press the “Delete Device” button on the touchscreen.


Making A Phone Or Audio Device A Favorite


2. Press the “Paired Phones” or “Paired Audio Devices” button on the touchscreen.

3. Press the settings icon button located to the right of the device name.


5. Press the “Make Favorite” button on the touchscreen; you will see the chosen device move to the top of the list.


Phonebook Download (Automatic Phonebook

Transfer From Mobile Phone) — If Equipped

If equipped and specifically supported by your phone,

Uconnect® Phone automatically downloads names (text names) and number entries from the mobile phone’s phonebook. Specific Bluetooth® Phones with Phone

Book Access Profile may support this feature. See

Uconnect® website, UconnectPhone.com, for supported phones.

• To call a name from a downloaded mobile phone book, follow the procedure in the Voice Recognition Quick

Reference section.

• Automatic download and update of a phone book, if supported, begins as soon as the Bluetooth® wireless phone connection is made to the Uconnect® Phone, for example, after you start the vehicle.


• A maximum of 1,000 entries per phone will be downloaded and updated every time a phone is connected to the Uconnect® Phone.

• Depending on the maximum number of entries downloaded, there may be a short delay before the latest downloaded names can be used. Until then, if available, the previously downloaded phonebook is available for use.

• Only the phonebook of the currently connected mobile phone is accessible.

• This downloaded phonebook cannot be edited or deleted on the Uconnect® Phone. These can only be edited on the mobile phone. The changes are transferred and updated to Uconnect® Phone on the next phone connection.

6


Managing Your Favorites

There are three ways you can add an entry to your

Favorites.

1. During an active call of a number to make a favorite, press and hold the preset button on the touchscreen on the top of the phone main screen.

2. After loading the mobile phonebook, select phonebook from the Phone main screen, then select the appropriate number. Press the settings icon next to the selected number to display the options pop-up. In the pop-up select “Add to Favorites.”

NOTE:

If the Favorites list is full, you will be asked to remove an existing favorite.

3. From the Phone main screen, select phonebook. From the phonebook screen, select the “Favorites” button on the touchscreen and then select the settings icon button on the touchscreen located to the right of the phonebook record. Select an empty entry and press the settings icon on that selected entry. When the

Options pop-up appears, press “Add from Mobile.”

You will then be asked which contact and number to choose from your mobile phonebook. When complete the new favorite will be shown.

To Remove A Favorite

1. To remove a Favorite, select “phonebook” from the

Phone main screen.

2. Next select “Favorites” on the left side of the screen and then press the settings icon button on the touchscreen.

3. Press the settings icon next to the Favorite you would like to remove.

4. The Options pop-up will display, press “Remove from

Favs.”

Phone Call Features

The following features can be accessed through the

Uconnect® Phone if the feature(s) are available and supported by Bluetooth® on your mobile service plan.

For example, if your mobile service plan provides threeway calling, this feature can be accessed through the

Uconnect® Phone. Check with your mobile service provider for the features that you have.


Ways To Initiate A Phone Call

Listed below are all the ways you can initiate a phone call with Uconnect® Phone.

• Redial

• Dial by pressing in the number

• Voice Commands (Dial by Saying a Name, Call by

Saying a Phonebook Name, Redial or Call Back)

• Favorites

• Mobile Phonebook

• Recent Call Log

• SMS Message Viewer

6


Dial By Saying A Number

1. Push the “Phone” button on your steering wheel to begin.

2. After the “Listening” prompt and the following beep, say “Dial 151-1234-5555.”

3. The Uconnect® Phone will dial the number

151-1234-5555.

Call By Saying A Phonebook Name

1. Push the Phone button on your steering wheel to begin.

2. After the “Listening” prompt and the following beep, say “Call John Doe Mobile.”

3. The Uconnect® Phone will dial the number associated with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe.

Call Controls

The touchscreen allows you to control the following call features:

• Answer

• End

• Ignore

• Hold/unhold

• Mute/unmute

• Transfer the call to/from the phone

• Swap two active calls

• Join two active calls together

Touch-Tone Number Entry

1. Press the “Phone” button on the touchscreen.

2. Press the “Dial” button on the touchscreen.

3. The Touch-Tone screen will be displayed.

4. Use the numbered buttons on the touchscreens to enter the number and press “Call.”

To send a touch-tone using Voice Recognition (VR), push the Voice Command button on your steering wheel while in a call and say “Send 1234#” or you can say “Send

Voicemail Password” if Voicemail password is stored in your mobile phonebook.


Recent Calls

You may browse up to 31 of the most recent of each of the following call types:

• All Calls

• Incoming Calls

• Outgoing Calls

• Missed Calls

These can be accessed by pressing the “recent calls” button on the Phone main screen.

You can also push the button on your steering wheel and say “Show my incoming calls” from any screen and the Incoming calls will be displayed.

NOTE:

Incoming can also be replaced with “Outgoing,”

“Recent” or “Missed.”

6


Answer Or Ignore An Incoming Call — No Call

Currently In Progress

When you receive a call on your mobile phone, the

Uconnect® Phone will interrupt the vehicle audio system. Push the Phone button on the steering wheel to accept the call. You can also press the “answer” button on the touchscreen or press the caller ID box.

Answer Or Ignore An Incoming Call — Call

Currently In Progress

If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your mobile phone. Push the Phone button on the steering wheel, or press the “answer” button on the touchscreen, or caller ID box, to place the current call on hold and answer the incoming call.

NOTE:

The Uconnect® Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it.

Making A Second Call While Current Call Is In

Progress

You can place a call on hold by pressing the “Hold” button on the Phone main screen, then dial a number from the dialpad, recent calls, SMS Inbox or from the phonebooks. To go back to the first call, refer to “Toggling

Between Calls” in this section. To combine two calls, refer to “Join Calls” in this section.

Place/Retrieve A Call From Hold

During an active call, press the “Hold” button on the

Phone main screen.

Toggling Between Calls

If two calls are in progress (one active and one on hold), press the “Swap” button on the Phone main screen. Only one call can be placed on hold at a time.

You can also push the Phone button to toggle between the active and held phone call.

Join Calls

When two calls are in progress (one active and one on hold), press the “Join Calls” button on the Phone main screen to combine all calls into a Conference Call.

Call Termination

To end a call in progress, momentarily push the Phone button or press the “end” button on the touchscreen.

Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.


Redial

Press the “Redial” button on the touchscreen, or push the

Phone button and after the “Listening” prompt and the following beep, say “Redial.”

The Uconnect® Phone will call the last number that was dialed from your mobile phone.

Call Continuation

Call continuation is the progression of a phone call on the

Uconnect® Phone after the vehicle ignition key has been switched to OFF.

NOTE:

The call will remain within the vehicle audio system until the phone becomes out of range for the

Bluetooth® connection. It is recommended to press the

“transfer” button on the touchscreen when leaving the vehicle.

6


Uconnect® Phone Features

Roadside Assistance/Towing Assistance

If you need roadside/towing assistance:

1. Push the Phone button to begin.

2. After the “Listening” prompt and the following beep, say “Roadside Assistance” or say “Towing Assistance.”

NOTE:

The roadside/towing assistance number dialed is based on the country where the vehicle is purchased

(1-800-521-2779 for the U.S./Canada, 55-14-3454 for

Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). Please refer to the FCA US LLC 24-Hour

“Roadside Assistance” coverage details in the Warranty

Information Booklet and in the Owner’s Information

Manual on the DVD under “Other References.”

Voice Mail Calling

To learn how to access your voice mail, refer to “Working with Automated Systems.”

Working With Automated Systems

This method is used in instances where one generally has to push numbers on the mobile phone keypad while navigating through an automated telephone system.

You can use your Uconnect® Phone to access a voice mail system or an automated service, such as a paging service or automated customer service line. Some services require immediate response selection. In some instances, that may be too quick for use of the Uconnect® Phone.

When calling a number with your Uconnect® Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can utilize the touchscreen or push the Voice Command button and say the word “Send” then the sequence you wish to

enter. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can push the Voice

Command button and say, “Send 3 7 4 6 #.” Saying

“Send” followed by a number, or sequence of numbers, is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager.

You can also send stored mobile phonebook entries as tones for fast and easy access to voice mail and pager entries. For example, if you previously created a Phonebook entry with First and/or Last Name as “Voicemail

Password”, then if you push the Voice Command button and say “Send Voicemail Password” the

Uconnect® Phone will then send the corresponding phone number associated with the phonebook entry, as tones over the phone.


NOTE:

• The first number encountered for that contact will be sent. All other numbers entered for that contact will be ignored.

• You may not hear all of the tones due to mobile phone network configurations. This is normal.

• Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature.

• Pauses, wait or other characters that are supported by some phones are not supported over Bluetooth®.

These additional symbols will be ignored in the dialing a numbered sequence.

6


Barge In — Overriding Prompts

The Voice Command button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “There are two numbers with the name John. Say the full name” you could push the Voice Command button and say, “John Smith” to select that option without having to listen to the rest of the voice prompt.

Voice Response Length

It is possible for you to choose between Brief and

Detailed Voice Response Length.


2. Press the “Voice” button on the touchscreen, then scroll down to Voice Response Length.

3. Select either “Brief” or “Detailed” by pressing the box next to the selection. A check-mark will appear to indicate your selection.

Phone And Network Status Indicators

Uconnect® Phone will provide notification to inform you of your phone and network status when you are attempting to make a phone call using Uconnect® Phone. The status is given for network signal strength and phone battery strength.

Dialing Using The Mobile Phone Keypad

You can dial a phone number with your mobile phone keypad and still use the Uconnect® Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your connected Bluetooth® mobile phone, the audio will be played through your vehicle’s audio system. The Uconnect® Phone will work the same as if you dial the number using voice a command.

NOTE:

Certain brands of mobile phones do not send the dial ring to the Uconnect® Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.

Mute/Un-Mute (Mute ON/OFF)

When you mute the Uconnect® Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. To mute the Uconnect® Phone simply press the “Mute” button on the Phone main screen.


Advanced Phone Connectivity

Transfer Call To And From Mobile Phone

The Uconnect® Phone allows ongoing calls to be transferred from your mobile phone to the Uconnect® Phone without terminating the call. To transfer an ongoing call from your connected mobile phone to the Uconnect®

Phone or vice versa, press the “Transfer” button on the

Phone main screen.

Connect Or Disconnect Link Between The

Uconnect® Phone And Mobile Phone

If you would like to connect or disconnect the Bluetooth® connection between a Uconnect® Phone paired mobile phone and the Uconnect® Phone, follow the instructions described in your mobile phone User’s Manual.

6


Things You Should Know About Your Uconnect®

Phone

Voice Command

For the best performance:

• Adjust the rearview mirror to provide at least ½ inch

(1 cm) gap between the overhead console (if equipped) and the mirror.

• Always wait for the beep before speaking.

• Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you.

• Ensure that no one other than you is speaking during a voice command period.

Performance is maximized under:

• Low-To-Medium Blower Setting

• Low-To-Medium Vehicle Speed

• Low Road Noise

• Smooth Road Surface

• Fully Closed Windows

• Dry Weather Condition

Even though the system is designed for many languages and accents, the system may not always work for some.

When navigating through an automated system such as voice mail, or when sending a page, before speaking the digit string, make sure to say “Send.”

NOTE:

It is recommended that you do not store names in your favorites phonebook while the vehicle is in motion.

Phonebook (Mobile and Favorites) name recognition rate is optimized when the entries are not similar. You can say

“O” (letter “O”) for “0” (zero).

Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported.

Far End Audio Performance

Audio quality is maximized under:

• Low-To-Medium Blower Setting

• Low-To-Medium Vehicle Speed

• Low Road Noise

• Smooth Road Surface


• Fully Closed Windows

• Dry Weather Conditions

• Operation From The Driver’s Seat

Performance such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the Uconnect® Phone.

Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume.

In a convertible vehicle, system performance may be compromised with the convertible top down.

6



Uconnect® Phone can read or send new messages on your phone.

Your phone must support Voice Text Reply over

Bluetooth® in order to use this feature. The “Messaging” button will be greyed out and the feature will not be available for use.

NOTE:

Uconnect® Phone Voice Text Reply is only available when the vehicle is not in moving.

Read Messages:

If you receive a new text message while your phone is connected to Uconnect® Phone, an announcement will be made to notify you that you have a new text message.

Once a message is received and viewed or listened to, you will have the following options:

• Send a Reply

• Forward

• Call

Send Messages Using Buttons On The Touchscreen:

You can send messages using Uconnect® Phone. To send a new message:

• Push the PHONE Button on the faceplate,

• Press the “messaging” button on the touchscreen then

“New Message”,

• Press one of the 18 preset messages and the person you wish to send the message to,

• If multiple numbers are available for the contact select which number you would like to have the message sent,

• Press “Send” or “Cancel”.

Send Messages Using Voice Commands:

• Press the button,

• After the “Listening” prompt and the following beep, say “Send message to John Smith mobile”,

• After the system prompts you for what message you want to send, say the message you wish to send or say

“List”. There are 18 preset messages.

While the list of defined messages are being read, you can interrupt the system by pressing the Voice Recognition button and saying the message you want to send.

After the system confirms that you want to send your message to John Smith, your message will be sent.

List of Preset Messages:

1. Yes.

2. No.


3. Okay.

4. I can’t talk right now.

5. Call me.

6. I’ll call you later.

7. I’m on my way.

8. Thanks.

9. I’ll be late.

10. I will be <number> minutes late.

11. See you in <number> minutes.

12. Stuck in traffic.

13. Start without me.

14. Where are you?

15. Are you there yet?

6


16. I need directions.

17. I’m lost.

18. See you later.

Bluetooth® Communication Link

Mobile phones have been found to lose connection to the

Uconnect® Phone. When this happens, the connection can generally be re-established by switching the mobile phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth® ON mode.

Power-Up

After switching the ignition key from OFF to either the

ON or ACC position, or after a language change, you must wait at least 15 seconds prior to using the system.

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the following conditions:

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operation.

Uconnect® 6.5AN VOICE RECOGNITION QUICK TIPS

CONTENTS

!

Uconnect® VOICE RECOGNITION . . . . . . . . . . .84

▫

Introducing Uconnect® . . . . . . . . . . . . . . . . . .84

▫

Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . .84

▫

Basic Voice Commands . . . . . . . . . . . . . . . . . .86

▫

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

▫

Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

▫

Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . .89

▫

Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

▫

Voice Text Reply . . . . . . . . . . . . . . . . . . . . . . .91

▫

SiriusXM Travel Link™ (6.5AN) . . . . . . . . . . . .92

▫

Additional Information . . . . . . . . . . . . . . . . . .93

7

84 Uconnect® 6.5AN VOICE RECOGNITION QUICK TIPS

Uconnect® VOICE RECOGNITION

Introducing Uconnect®

Start using Uconnect® Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect®

6.5AN system.

Get Started

All you need to control your Uconnect® system with your voice are the buttons on your steering wheel.

1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing instructions.

2. Reduce background noise. Wind and passenger conversations are examples of noise that may impact recognition.

Uconnect® 6.5AN VOICE RECOGNITION QUICK TIPS 85

3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is positioned on the rearview mirror and aimed at the driver.

4. Each time you give a Voice Command, you must first press either the VR or Phone button, wait until after the beep, then say your Voice Command.

5. You can interrupt the help message or system prompts by pressing the VR or Phone button and saying a Voice

Command from current category.

Uconnect® Voice Command Buttons

1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive A Text

2 — Push To Begin Radio, Navigation, or Media functions

3 — Push To End Call

7


Basic Voice Commands

The basic Voice Commands below can be given at any point while using your Uconnect® system.

Press the VR button . After the beep, say%

• Cancel to stop a current voice session

• Help to hear a list of suggested Voice Commands

• Repeat to listen to the system prompts again

Notice the visual cues that inform you of your voice recognition system’s status.


Radio

Use your voice to quickly get to the AM, FM or SiriusXM

Satellite Radio stations you would like to hear. (Subscription or included SiriusXM Satellite Radio trial required.)

Press the VR button . After the beep, say%

• Tune to ninety-five-point-five FM

• Tune to Satellite Channel Hits 1

TIP:

At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.” The system will provide you with a list of commands.

Media

Uconnect® offers connections via USB, Bluetooth® and auxiliary ports. Voice operation is only available for connected USB and iPod® devices. (Remote CD player optional and not available on all vehicles.)

7


Press the VR button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist.

• Change source to Bluetooth®

• Change source to iPod®

• Change source to USB

• Play artist Beethoven; Play album Greatest Hits; Play

song

Moonlight Sonata; Play genre Classical

TIP:

Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice

Command must match exactly how the artist, album, song and genre information is displayed.

Navigation

The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go.

1. To enter a destination, press the VR button the beep, say%

. After

• For the 6.5AN Uconnect® System, say... “Navigate to

800 Chrysler Drive Auburn Hills, Michigan”

2. Then follow the system prompts.

TIP:

To start a POI search, press the VR button

After the beep, say “ Find nearest coffee shop.”

.


7


Phone

Making and answering hands-free phone calls is easy with Uconnect®. When the Phonebook button is illuminated on your touchscreen, your system is ready. Check

UconnectPhone.com

for mobile phone compatibility and pairing instructions.

Press the Phone button . After the beep, say one of the following commands%

• Call John Smith

• Dial 123-456-7890 and follow the system prompts

• Redial (call previous outgoing phone number)

• Call back (call previous incoming phone number)

TIP:

When providing a Voice Command, press the Phone button and say “Call,” then pronounce the name

exactly

as it appears in your phone book. When a contact has multiple phone numbers, you can say “Call John

Smith work.”


Uconnect® will announce incoming text messages. Press the Phone button and say Listen. (Must have compatible mobile phone paired to Uconnect® system.)

1. Once an incoming text message is read to you, press the Phone button . After the beep, say... “Reply”

2. Listen to the Uconnect® prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts.


PRE-DEFINED VOICE TEXT REPLY RESPONSES

Yes.

Stuck in Traffic.

See you later.

Can’t talk right now.

Okay.

Call me.

I’ll call you later.

I’m on my way.

I’m lost.

Start without me.

See you in

<number> of minutes.

I need directions.

Are you there yet?

I’ll be Late.

I will be <number> minutes late.

Where are you?

No.

Thanks.

TIP:

Your mobile phone must have the full implementation of the Message Access Profile (MAP) to take advantage of this feature. For details about MAP, visit

UconnectPhone.com

. Apple iPhone® iOS6 or later supports reading incoming text messages only.

7


SiriusXM Travel Link™ (6.5AN)

Need to find a gas station, view local movie listings, check a sports score or the 5 - day weather forecast?

SiriusXM Travel Link™ is a suite of services that brings a wealth of information right to your Uconnect® 6.5AN

system.

Push the VR button following commands:

. After the beep, say one of the

• Show fuel prices.

• Show 5 - day weather forecast.

• Show extended weather.

TIP:

Traffic alerts are not accessible with Voice Command.

Additional Information

© 2015 FCA US LLC. All rights reserved. Mopar® and

Uconnect® are registered trademarks and Mopar Owner

Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc.

DriveUconnect.com

Uconnect® System Support 1-877-855-8400

Mon. – Fri., 7:00 am – 12:00 am, ET

Sat., 8:00 am – 10:00 pm, ET

Sun., 9:00 am – 5:00 pm, ET


7

NAVIGATION

CONTENTS

!

GETTING STARTED. . . . . . . . . . . . . . . . . . . . . .97

!

MAIN MENU . . . . . . . . . . . . . . . . . . . . . . . . . .97

!

WHERE TO? . . . . . . . . . . . . . . . . . . . . . . . . . . .97

▫

Where To? — Address . . . . . . . . . . . . . . . . . .100

▫

Where To? — Recent . . . . . . . . . . . . . . . . . . .101

▫

Where To? — Point Of Interest . . . . . . . . . . . .101

▫

Where To? — Favorite Destinations . . . . . . . . .102

▫

Where To? — Intersection. . . . . . . . . . . . . . . .103

▫

Where To? — Go Home . . . . . . . . . . . . . . . . .104

▫

Where To? — Trips . . . . . . . . . . . . . . . . . . . .105

▫

Where To? — GEO Coordinate . . . . . . . . . . . .107

▫

Where To? — Point On Map . . . . . . . . . . . . . .108

▫

Where To? — City Center. . . . . . . . . . . . . . . .109

▫

Where To? — Closest City . . . . . . . . . . . . . . .109

▫

Where To? — Trails . . . . . . . . . . . . . . . . . . . .110

▫

Where To? — Phone. . . . . . . . . . . . . . . . . . . .110

▫

Before Route Guidance . . . . . . . . . . . . . . . . . .110

!

VIEW MAP . . . . . . . . . . . . . . . . . . . . . . . . . . .111

!

VIEW MAP — SETTINGS . . . . . . . . . . . . . . . . .114

▫

Settings — Map Setup . . . . . . . . . . . . . . . . . .115

8

96 NAVIGATION

▫

Settings — Guidance . . . . . . . . . . . . . . . . . . .117

!

INFORMATION . . . . . . . . . . . . . . . . . . . . . . . .120

▫

Information — Where Am I?. . . . . . . . . . . . . .120

▫

Information — Trip Computer . . . . . . . . . . . .121

!

EMERGENCY . . . . . . . . . . . . . . . . . . . . . . . . .121

▫

Emergency — Hospital. . . . . . . . . . . . . . . . . .122

▫

Emergency — Police . . . . . . . . . . . . . . . . . . .123

▫

Emergency — Fire Department . . . . . . . . . . . .123

GETTING STARTED

To access the Navigation system, push the “Nav” button below the screen.

MAIN MENU

• Press “Where To?” to find or route to a destination.

• Press “View Map” to view the map.

NAVIGATION 97

• Press “Information” to view Traffic, Where Am I? and

Trip Computer information.

• Press “Emergency” to search for Hospitals, Police and

Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites.

• Press “Stop” to stop a route.

• Press “Detour” to detour a route.

WHERE TO?

From the Nav Main Menu, press the Where To? button and select one of the following methods to program a route guidance.

NOTE:

Refer to the individual section of the chosen option for further information.

8

98 NAVIGATION

Address

Press this button to search by a street address or a street name with house number.

Recent

Press this button to access previously routed addresses or locations.

Point Of Interest

Press this button when you want to route to a point of interest. The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI).

Favorites

Press this button to access previously saved addresses or locations.

Intersection

Press this button to enter in two street names as a destination.

Go Home

Press this button to program or confirm a route to the saved home address.

Trips

Press this button to program a new trip or recall a saved trip.

GEO Coordinates

Press this button to route to a GEO Coordinate. A geo coordinate is a coordinate used in geography. You can determine a geo coordinate with the help of a handheld

GPS receiver, a map or the navigation system.

Point On Map

Press this button to select a destination directly from the

Map screen. By selecting a street segment or icon, you can quickly enter a destination without the need to input the city name or street.

City Center

Press this button to route to a particular city. The navigation system will calculate a route with the destination at the center of the city.

Trails

Press the “Trails” button and select the option to start trail recording to track the route you are driving. Select the option to “stop trail recording” to end tracking. This gives you a point of reference to for a particular route if needed.

NAVIGATION 99

Closest City

Press this button to route to a nearby city. The screen will display an alphabetical listing of nearby cities. The navigation system will calculate a route with the destination at the center of the nearby city.

Phone Number

Press this button to route to a location or point of interest by the phone number.

NOTE:

You can press the “Back Arrow” button to return to the previous screen or the “X” button to exit.

8

100 NAVIGATION

Where To? — Address

To enter a destination by Address, follow these steps:

1. While in the Nav Main Menu, press the “Where To?” button and then press the “Address” button.

NOTE:

To change the state and/or country, press the state, country button and follow the prompts to change the state and/or country.

2. Press “Spell City” or “Spell Street” to begin entering the address of your destination.

If you press Spell City, you will have to enter and select/press the desired city name, followed by the desired street name and lastly the house number.

If you press Spell Street, you will have to enter and select/press the desired street name in the correct city and then you will have to enter the house number.

3. Once the correct City, Street and Number has been entered, you will be asked to confirm your destination by pressing “OK.”

4. Press the “Yes” button to confirm your destination and begin your route.

NOTE:

If you are currently on a route guidance and you select “Recent”, the system will ask you to choose one of the following:

• Cancel previous route

• Add as first destination

• Add as last destination


Where To? — Recent

To route to a recent destination, press the “Recent” button in the NAV Main Menu.

Press the button with the name of the desired destination.

Confirm the route with “Yes” to start the route guidance.

To delete a destination from the list, press the “Trash

Can” icon button.

To display the options for a destination press the “Options” button that looks like a gear.

The following Options are available for each destination:

• Edit Name

• Add Phone Number

• Move Up in the list

• Move Down in the list

• Place Pin on the location (saves the spot on the list)

NAVIGATION 101

NOTE:


Where To? — Point Of Interest

To enter a destination by Point of Interest (POI) press the

“Point of Interest” button in the Nav Main Menu.

The Point of Interest database allows you to select a destination from a list of locations and public places or points of interest (POI).

You have the following POIs to choose from:

• Gas Stations

• Restaurants

• Hotels/Motels

• ATM/Banking

• All POIs

• Spell POI Name

8

102 NAVIGATION

You can also change your POI search area by pressing the

“Change Search Area” button. You will have the following options to change your search area:

• Around Me

• In a City

• Near Destination (only available during route guidance)

• Along Route (only available during route guidance)

NOTE:


Where To? — Favorite Destinations

To route to a favorite destination, press the “Favorites” button in the NAV Main Menu.

Press the button with the name of the desired favorite destination and confirm the route with “Yes” to start the route guidance.

To delete a destination from the list, press the “Trash

Can” icon button.

To save a favorite destination, press the “Add Favorite” button and follow the steps to route a destination.

To display the options for a favorite destination press the

“Options” button that looks like a gear.

The following Options are available for each favorite destination:

• Edit Name

• Add Phone Number

NOTE:

If you are currently on a route guidance and you select a Favorite, the system will ask you to choose one of the following:





Where To? — Intersection

To enter a destination by Intersection, follow these steps:

1. While in the Nav Main Menu, press the “Where To?” button and then press the “Intersection” button.

This menu shows the default country and state setting.

NAVIGATION 103

NOTE:

To change the state and/or country, press the

“state”, “country” button and follow the prompts to change the state and/or country.

2. This menu shows the default country and state settings.

If you press “Spell City”, you will have to enter and select/press the desired city name, followed by the desired street name and lastly you will have to enter the intersection street.

If you press “Spell Street”, you will have to enter and select/press the desired street name in the correct city and then you will have to enter the intersecting street.

3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination.


8

104 NAVIGATION

NOTE:

If you are currently on a route guidance and you select a Intersection, the system will ask you to choose one of the following:





Where To? — Go Home

To enter your Home Address, follow these steps:

1. While in the Nav Main Menu, press the Where To?

button and then press the Go Home button. If there is no Home Address entered, press “Yes” to enter it now.

2. To set your set your Home Address choose one of the following options:

NOTE:


• Address

• Recent

• Point of Interest

• Favorites

• Intersection

• GEO Coordinates

• Point on Map

• City Center

• Closest Cities

• Phone Number

3. Once you have generated your Home Address, you will be asked to Save it.

4. Press the “Save” button to confirm your destination and begin the route to your Home Address.

5. This address will be saved as your Home Address and it can be accessed by pressing the “Go Home” button in the Where To? Menu.

Change/Delete Your Home Address

To change or delete your current Home Address perform the following:

1. Press the “Go Home” button in the Where To? Menu.

2. Press the “Options” button at the bottom of the displayed map.

3. Press “Clear Home” and then “Yes” to clear/delete your Home Address.

4. To enter in a new Home Address, follow the Where

To? – Go Home procedure.

NOTE:


NAVIGATION 105

Where To? — Trips

To route to a saved Trip, press the “Recent” button in the

NAV Main Menu.

Press the button with the name of the desired Trip and press the first destination in the list. Confirm the route by pressing “Yes” to start the route guidance.

To add a Trip, follow these steps:

1. Press the “Create new Trip” button.

2. Type in the new Trip Name.

3. Press “Add Destination” to add destinations to your trip.

4. Choose from the following options to add a destination.

8

106 NAVIGATION

NOTE:


• Address

• Recent

• Point of Interest

• Favorites

• Intersection

• GEO Coordinates

• Point on Map

• City Center

• Closest Cities

• Phone Number

5. Add more needed destinations to your trip.

NOTE:

Each destination will be listed in order, with the last destination being the final destination.

6. Your new Trip will appear on the Trips list.

To delete a Trip from the list, press the “Trash Can” icon button.

To display the options for a trip press the “Options” button that looks like a gear.

The following Options are available for each trip:

• Edit Name

• Move Up in the list

• Move Down in the list

NOTE:


Where To? — GEO Coordinate

To enter a destination by GEO Coordinate, press “Where

To?” in the Nav Main Menu and then press the “GEO

Coordinate” button.

1. Enter the Latitude by typing in the numbers. Use the

“Left and Right” arrows to select specific numbers in the location shown.

2. Press the “OK” button.

3. Enter the Longitude by typing in the numbers. Use the

“Left and Right” arrows to select specific numbers in the location shown.

NOTE:

Press the “Format” button to change the format of the Latitude/Longitude entry.

NAVIGATION 107

4. Press “OK” to confirm the destination.


NOTE:

If you are currently on a route guidance and you select a GEO Coordinate, the system will ask you to choose one of the following:





8

108 NAVIGATION

Where To? — Point On Map

To enter a destination by Point on Map, press “Where

To?” in the Nav Main Menu and then press the “Point on

Map” button.

1. Use the touchscreen to drag the center of the cross over the desired destination.

2. Either press the “address bar” at the top center of the screen to confirm your location or press the “Details” button in the upper right corner to display the available locations near that point on the map.


NOTE:

If you are currently on a route guidance and you select a Point on Map, the system will ask you to choose one of the following:





Where To? — City Center

To enter a destination by City Center, press “Where To?” in the Nav Main Menu and then press the “City Center” button.

1. Enter the name of the City you would like to route to.

2. Press the desired city from the list.


NOTE:

If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following:





NAVIGATION 109

Where To? — Closest City

To enter a destination by Closest City, press “Where To?” in the Nav Main Menu and then press the “Closest City” button.

1. Press the desired city from the list.


NOTE:

If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following:





8

110 NAVIGATION

Where To? — Trails

When starting to drive a trail you want to record, press

“Trails”, and then press “Start Trail Recording.”

When you want to end the recording of a route, press

“Stop Trail Recording.”

The trip you recorded will be added to the Recent Trails list.

Where To? — Phone

To enter a destination by Phone number, press “Where

To?” in the Nav Main Menu and then press the “Phone

Number” button.

1. Enter the Phone Number of the destination you would like to route to.

2. Press the desired destination from the list.


NOTE:

If you are currently on a route guidance and you select a Phone number destination, the system will ask you to choose one of the following:





Before Route Guidance

Before confirming the route with the “Yes” button, it is possible to select options different from the default route settings.

• Options – Press the “Options” button to display a list of options to alter your route. To make a selection press and release the desired setting until a check-mark appears.

• Avoid – Press the “Avoid” button to choose road types to avoid during your route. To make a selection press and release the desired setting until a check-mark appears.

NOTE:

Since toll roads, tunnels and ferries are built for the purpose of shortening travel distances, avoiding these road types may increase distance and travel time.

• Save – Press the “Save” button to save the destination as a Favorite.

Press the “Yes” button to confirm your destination and to start your route guidance.

NOTE:


NAVIGATION 111

VIEW MAP

Press the “View Map” button from the Nav Main Menu to display a map of your current position.

With the map displayed you have the following features available.

Menu

Press this button to return to the Nav Main Menu.

Zoom In +/ Zoom Out –

Press the Zoom In (+) or Zoom Out (–) buttons to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (e.g. residential streets, lightly-traveled county roads.)

8

112 NAVIGATION

Time Of Arrival/Time To Destination/Distance (Only

During Route Guidance)

Press the button in the upper right area of the screen to the display items available. Press the desired option button.

• Time of Arrival

• Time to Destination

• Distance

Turn List (Only During Route Guidance)

Press the area in the upper center part of the screen that displays your next turn to see a Turn List for your current route.

Press a turn in the displayed Turn List for the following options:

• Show on Map

• Avoid Street

Options (Only During Route Guidance)

Press the “Options” button to display the following options. Press the desired button.

2D North Up/Map View 2D

Press this button to scroll between the two viewing options.

Settings

Press this button to view all the available settings. See

View Map – Settings for more information.

Repeat Directions

Press this button to repeat the current voice prompt.

Turn List

Press this button to view the turn list for the current route.

Stop Guidance

Press this button to stop route guidance.

NAVIGATION 113

Where Am I?

Press the area in the lower center part of the screen that displays your current location to view the Where Am I?

view.

Where Am I? displays the address and GEO Coordinates of your current location.

• Press the “GPS” button to view the GPS information.

• Press the “Save” button to save the location in your

Favorites.

NOTE:


8

114 NAVIGATION

VIEW MAP — SETTINGS

With the Map displayed, press the “Options” button and then press the “Settings” button. You can also access this menu by pressing the “Settings” button in the lower right of the Nav Main Menu.

The following Map Settings are available.

Map Setup

Press this button to display items to customize how your map is viewed. Settings – Map Setup for more information.

Speed Limit

Press this button to turn on/off speed limit warning announcements and to enter a predefined speed limit for your route.

Guidance Options

Press this button to display items to customize your route guidance. Settings – Guidance Options for more information.

Units

Press this button to change the units display. Press the desired button.

• U.S. (mile/feet)

• Imperial (mile/yard)

• Metric (meter)

GPS

Press this button to change the GPS display. Press the desired button.

• Decimal

• DMS

• DM

Copy Device Information To USB? (If Equipped)

Press this button to copy your radio information to a USB jump drive through the available USB port.

Settings — Map Setup

With the Map displayed, press the “Options” button on the touchscreen, then press the “Settings” button on the touchscreen and then the “Map Setup” button on the touchscreen. You can also access this menu by pressing the

“Settings” button in the lower right of the Nav Main Menu.

The following Map Setup options are available.

• Orientation

Press this button on the touchscreen to change how the

Map Orientation is displayed. Press the desired button on the touchscreen.

North Up

Heading Up

NAVIGATION 115

• Current Street

Press this button on the touchscreen to turn on/off the current street display on the lower center of the Map

View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• Destination Information

Press this button on the touchscreen to change the

Destination Information that is displayed in the upper right corner of the Map View. Press the desired button on the touchscreen.

Time of Arrival

Time to Destination

Distance

8

116 NAVIGATION

• AutoZoom


AutoZoom feature adjust the zoom level during guidance in Map View. Press the desired button on the touchscreen.

Far

Normal

Near

Off

• Vehicle Icon

Press this button on the touchscreen to change the vehicle icon that is displayed while in Map View. Press “Previous” or “Next” to view the available icons. Press the

“back” icon button on the touchscreen when you’ve made you selection.

• Show POI Icons

Press this button on the touchscreen to show the selected

Point of Interest icons while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• POI Icon List

Press this button on the touchscreen to display the available Point of Interest icons you would like displayed while in Map View. Press and release the desired selection button on the touchscreen until a check-mark appears, showing the setting has been selected.

• TMC Incidents

Press this button on the touchscreen to show Traffic

Message Channel (TMC) Incidents while in Map View.

Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• Park Areas

Press this button on the touchscreen to display Park

Areas while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• Railroads

Press this button on the touchscreen to display Railroad tracks while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• City Areas

Press this button on the touchscreen to display City Areas while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

NAVIGATION 117

• River Names

Press this button on the touchscreen to display River

Names while in Map View. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

NOTE:

You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.

Settings — Guidance

With the Map displayed, press the “Options” button on the touchscreen, then press the “Settings” button on the touchscreen and then the “Guidance” button on the touchscreen. You can also access this menu by pressing the “Settings” button in the lower right of the Nav Main

Menu.

8

118 NAVIGATION

The following Guidance options are available.

• Play Voice Guidance Prompts

Press this button on the touchscreen to enable Voice

Guidance Prompts during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• Nav Volume Adjustment

Press the “+” or “–” buttons on the touchscreen to adjust the Nav Voice Prompt Volume.

• Lane Recommendation

Press this button on the touchscreen to enable Lane

Recommendation during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• Junction View

Press this button on the touchscreen to enable Junction

View during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• Navigation Turn-by-Turn Displayed In Cluster

Press this button on the touchscreen to enable navigation turn-by-turn displayed in vehicles cluster during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.

• TMC Route Mode (If Equipped)


Traffic Message Channel (TMC) Route Mode functions during route guidance. Press the desired button on the touchscreen.

Automatic

By Delay Time

Manual

Off

• TMC Avoidance Types (If Equipped)

Press this button on the touchscreen to display the available Traffic Message Channel (TMC) Avoidance

Types you would like displayed while in route guidance.

NAVIGATION 119

Press and release the desired selection button on the touchscreen until a check-mark appears, showing the setting has been selected.

• Avoid

Press the Avoid button on the touchscreen to choose road types to avoid during your route. To make a selection press and release the desired setting until a check-mark appears.

NOTE:

You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.

8

120 NAVIGATION

INFORMATION

From the Nav Main Menu, push the “Information” button and select one of the following options to view additional information.

• Traffic

• Where Am I?

• Trip Computer

NOTE:

You can push the “Back Arrow” button to return to the previous screen or the “X” button to exit.

Information — Where Am I?

To select Where Am I? information, press the “Information” button from the Nav Main Menu and then press the

“Where Am I?” button.

Where Am I? displays the address and GEO Coordinates of your current location.

• Press the “GPS” button to view the GPS information.

• Press the “Save” button to save the location in your

Favorites.

NOTE:


Information — Trip Computer

To select Trip Computer information, press the “Information” button from the Nav Main Menu and then press the

“Trip Computer” button.

Trip Computer displays the following trip information from your last trip:

• Travel Direction

• Distance To Final Destination

• Vehicle Speed

• Distance Traveled

• Overall Average Speed

• Moving Average Speed

• Maximum Speed Reached

• Total Time Traveled

NAVIGATION 121

• Travel Time Spent Moving

• Travel Time Spent Stopped

NOTE:


EMERGENCY

From the Nav Main Menu, press the “Emergency” button and press one of the following options to search and route to a specific location.

• Hospital – Search and route to a Hospital close to your current location

• Police – Search and route to a Police Station close to your current location

• Fire Department – Search and route a Fire Department close to your current location

Press the “Location” button to display your exact current location.

8

122 NAVIGATION

Press the “Save” button to save your current location in

Favorites.

NOTE:


Emergency — Hospital

To search for a Hospital close to your current location, press “Emergency” from the Nav Main Menu and then press the “Hospital” button.

You can search for a Hospital by the following categories, which are button tabs at the top of the screen.

• Name

• Distance

• ABC (Search)

NOTE:

In case of emergency, please contact the facility to verify their availability before proceeding.

Press the desired Hospital and press “Yes” to confirm the destination.

NOTE:

If you are currently on a route guidance and you select a Hospital the system will ask you to choose one of the following:





Emergency — Police

To search for a Police Station close to your current location, press “Emergency” from the Nav Main Menu and then press the “Police Station” button.

You can search for a Police Station by the following categories, which are button tabs at the top of the screen.

• Name

• Distance

• ABC (Search)

NOTE:


Press the desired Police Station and press “Yes” to confirm the destination.

NAVIGATION 123

NOTE:

If you are currently on a route guidance and you select a Police Station the system will ask you to choose one of the following:





Emergency — Fire Department

To search for a Fire Department close to your current location, press “Emergency” from the Nav Main Menu and then press the “Fire Department” button.

8

124 NAVIGATION

You can search for a Fire Department by the following categories, which are button tabs at the top of the screen.

• Name

• Distance

• ABC (Search)

NOTE:


Press the desired Fire Department and press “Yes” to confirm the destination.

NOTE:

If you are currently on a route guidance and you select a Fire Department the system will ask you to choose one of the following:





16UC65F-526-AA

First Edition

Uconnect

®

6.5AN

Printed in the USA

©2015 FCA US LLC. All Rights Reserved.

Chrysler, Dodge, Jeep, Ram and Mopar are registered trademarks of FCA US LLC.

FIAT is a registered trademark of Fiat Group Marketing

& Corporate Communication S.p.A., used under license by FCA US LLC.

Uconnect 6.5AN Owner's Manual Supplement

Uconnect

Owner’s Manual Supplement

TABLE OF CONTENTS

SAFETY GUIDELINES

INTRODUCTION

ALL ABOUT Uconnect®

RADIO MODE

MEDIA MODE

Uconnect® PHONE

Uconnect® 6.5AN VOICE RECOGNITION QUICK TIPS

NAVIGATION

Related manuals

Table of contents

Uconnect 6.5AN Owner's Manual Supplement

Uconnect

Owner’s Manual Supplement

TABLE OF CONTENTS

SAFETY GUIDELINES

INTRODUCTION

ALL ABOUT Uconnect®

RADIO MODE

MEDIA MODE

Uconnect® PHONE

Uconnect® 6.5AN VOICE RECOGNITION QUICK TIPS

NAVIGATION

Related manuals

Fiat

2016 500X

Uconnect

4/4 NAV

Fiat

2017 500X

RAM

2016 ProMaster City Cargo Van

Fiat

2017 500L

RAM

2017 ProMaster City

Uconnect

3/3

Panasonic Corporation of North America

ACJ-VP4RA

Panasonic Corporation of North America

ACJ-CA180CTPLHS

Fiat

2015 500L

Table of contents