advertisement
Section 18: Test & Measurement
Sub-Section
Page
Multimeters & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .488
Clamp Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .494
Tone Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .497
Environmental Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .499
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .502
Circuit Voltage Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .504
Insulation Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .506
Audio/Video Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .507
Universal Device Programmers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .507
Counters & Function Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .508
Oscilloscopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .509
Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .510
Specialty & Misc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .512
Probes & Probe Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .514
Test Leads, Clips & Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .517
Descriptive information herein supplied directly by individual manufacturers. Not responsible for opinion-oriented information or typographical errors. Not all products may be in stock or available to all EDGE members. Price is subject to change without notice. Restrictions may apply. We reserve the right to limit quantities to stock on hand.
487
Test & Measurement - Multimeters & Accessories
Fluke 87 Series V
Fluke 80 Series V DMMs provide 11 functions for electronic and industrial application, including high-performance DC/AC voltage and current measurement, frequency, duty cycle, resistance, conductance, continuity, diode test and capacitance measurement.
Bright backlit display on all three models features 20% larger digits for easier viewing. Battery and fuse access door let you replace batteries without breaking calibration seal. 4 1/2 digit mode, 20,000count display. Adjustable speed drive (ASD) filter, Temperature (87-
5 only) for accurate measurements on motor drives. Temperature (87-5 only).
Part #
Fluke-83-5
Fluke-87-5
Description
Industrial Multimeter
Industrial True RMS Multimeter with Temperature
Fluke 170 Series
Designed tough to withstand the harshest work environments, and are accurate enough to rival most bench meters. 6000-count display for better resolution. True-rms AC voltage and current measurement for accurate readings on all waveforms. Backlight to illuminate the screen in dark workspaces (177, 179). Easy-access battery door to change the battery without breaking the calibration seal.
Drop protected to 1 meter. Overmolded case features integrated probe holder. Min/Max records irregular activity. Auto and manual hold. Temperature. Comes packaged with TL75 test leads, 9V battery (installed) and manual. The Fluke 179 comes with an 80BK Temperature Probe.
Part #
Fluke 175
Fluke 177
Fluke 179
Features
Max voltage of 1000, true-rms, Basic DC accuracy is 0.15%,
Min/Max/Avg, and optional ToolPak meter hanging kit with magnet.
Max voltage of 1000, true-rms, Basic DC accuracy is 0.09%, backlight, Min/Max/Avg, and optional ToolPak meter hanging kit with magnet.
Max voltage of 1000, true-rms, temperature, Basic DC accuracy is 0.09%, Min/Max/Avg, and optional ToolPak meter hanging kit with magnet.
Fluke 187 and 189 Digital Multimeters
True-rms AC, AC+DC for accurate readings on non-linear loads.
Data logging with time and date stamp (189 only). 50,000-count resolution with instant readings for detailed analysis. Multiple reading display with bargraph for comprehensive analysis. Two-level backlight for easier reading in dark workspaces. MIN MAX with time stamp to record values with elapsed time. Fast MIN MAX captures peaks to 250µs. Battery and fuse access door let you replace batteries and fuse without breaking calibration seal. Comes packaged with TL71
Silicone Test Leads, probe holders, two AC72 Alligator Clips, four AA batteries
(installed), CD-ROM (user's manual and technical notes) and operator's guide.
Part #
Fluke 187
Fluke 189
Description
Digital multimeter
Logging multimeter
Fluke 27 Analog/Digital Multimeter
Fluke 27 combines accurate digital and analog measurement capability with extreme ruggedness and durability. It is totally sealed, and is tough enough to withstand water, contaminants, chemicals accidental drops and severe electrical overloads.
Part # Fluke 27
Electrician's Combo Kit - Fluke 117 and 322 Clamp Meter
Combo kits pairs the Fluke 117 DMM with the Fluke 322 clamp, including the
C115 durable soft carrying case. 117 true-rms digital multimeter with non-contact voltage detection. ToolPak Magnetic Meter Hanging Strap. TL75 Hard
Point Test Lead Set.
Part # Fluke 117/322
Compact True-RMS Multimeters
For field service technicians. Auto Volt for automatic ac/dc voltage selection. Resistance, continuity, frequency, capacitance and diode test. Measures 20 A (30 seconds momentary; 10 A continuous). LoZ - low input impedance helps prevent false readings Cat
III, 600v.
Part # Fluke 115
For electrical troubleshooting. AutoVolt for automatic ac/dc voltage selection. Resistance and continuity.
Part # Fluke 114
VoltAlert™ Technology for integrated non-contact voltage detection. AutoVolt feature for automatic ac/dc voltage selection.
LoZ - low input impedance prevents false readings. Current measurement 20A (30 seconds momentary; 10A continuous).
Resistance and continuity. LoZ - low impedance helps prevent false readings.
Part # Fluke 117
Fluke 116 HVAC Multimeter with Temperature and Microamps
Specifically designed for the HVAC professional. Includes temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors. Use to test motor start and run capacitors up to 10,000 microfarads.
Resistance, continuity, frequency and capacitance. Cat II 600V safety rated. LoZ - low input impedance helps prevent false readings. TL75 Hard Point Test Lead Set.
Part # Fluke 116
TPAK™ Meter Hanging Kit
Now you can hang your meter almost anywhere with the new Fluke TPAK accessories kit. TPAK includes a universal hanger, a magnet, and 9-inch (43 cm) and 17-inch (23 cm) "hook-and-loop" hanger straps. The universal hanger is designed to fit into the special module on the back of the meter. Allows you to hang your meter on a nail, hook or other object. You can add a piece of rope, flexible wire or cable to hang the meter in almost any position.
Part # TPAK
HVAC Combo Kit
This combo kit pairs the Fluke 116 DMM and the Fluke 62
Infrared Thermometer for productive and effective troubleshooting in one total solution, including the C115 durable soft carrying case. Also includes TL75 Hard
Point Test Lead Set, ToolPak Magnetic Meter Hanging
Strap, Pipe wrap thermocouple, Fluke 80BK Integrated
Temperature Probe and the Fluke 80AK Thermocouple Adapter.
Part # Fluke 116/62
Industrial Electrician Combo Kit
Kit contains: 87V Industrial Multimeter, C35 lightweight soft case, 1.5m silicone leads, removable probes with 4mm of exposed metal for use on industrial circuits, retractable long reach alligator clips, magnetic hanger to position and hold meter to steel surfaces and K-type temperature probes.
Part # Fluke 87-5/E2
488
Test & Measurement - Multimeters & Accessories
Cases
Soft zippered carrying cases for DMMs.
Part #
C25
C90
C50
Description
Large Soft Case with padding and inside pocket.
Soft Case with inside pocket and belt loop.
Zippered carrying case with inside pocket, belt loop and inside meter strap. For 20, 50 and 70 series.
C195 Soft Carrying Case Universal
Durable soft case. Adjustable storage compartments suitable for all ScopeMeter models. Storage compartments for test leads, probes, instruction manual, power adapter and other accessories.
Part # C195
Small Sized Multi-Testers
Packed with functions, features and support to meet every application and ensure the best value. Larger displays, extra fusing (including spare fuses), safety test leads, superior Digi-Glo™ backlighting, live voltage safety tester, wrong input user warning beepers and patented new T-Shape designs.
Use for home, auto, boat, RV and workshop. Five functions/15 ranges. Smallest size. Special ranges to test household batteries.
Ohms zero adjust. Holster included. AC and DC voltage is 0-
500V, ±5.0%. DC current is 0-250mA, ±5.0%. Resistance is 0-2M ohm, ±5.0%. Battery test is 1.5V, 9V DC. Analog display.
Part # AM8C
Larger displays, extra fusing (including spare fuses), safety test leads, superior Digi-Glo™ backlighting, live voltage safety tester, wrong input user warning beepers and patented new T-Shape designs. Five functions/16 ranges. Auto-off saves batteries. Data hold. Protective case included. 3200-count display with analog bargraph. DC voltage is 0.1mV - 450V,
±2.0%. AC voltage is 10mV - 450V, ±4.0%. Resistance is 0.1 ohm - 32M ohm,
±2.0%. Diode test and continuity beeper.
Part # DM78B
General Purpose Multimeters
Compact digital multimeter with attached test leads for the home, school or workshop. Six functions/14 ranges. Special ranges to test household batteries. 2000-count. Holster included.
Part # DM7C
Compact autoranging meter with battery test function for home office or workshop. High resolution, 4000-count autoranger.
Eight functions/19 ranges. Continuity beeper. Special ranges to test household batteries with good, not good LED. Holster included.
Part # DM9C
Digital MultiMeters
5XP Digital Multimeter
This compact full-purpose multimeter is the right choice for residential, commercial and general troubleshooting applications.
Features 27 ranges/10 functions. VolTect™ Non-Contact Voltage
Detector lets you instantly identify dangerous AC voltage. Magne-
Grip™ holster with magnetic strap frees both hands for work.
2000-count 3-1/2 digit display and 750V AC/1000V DC. Resolution provides more precise measurements. Resistance and continuity for troubleshooting bad connections. Battery load test with 1.5 volt and 9 volt capabilities. Min/Max records minimum and maximum values. Data Hold freezes display to "hold" measurement reading.
Part # 5XP-A
15XP Digital MultiMeter
This compact digital multimeter for electronics and test applications is the right choice for electronics engineers, technicians and field service. Autoranging display for faster measurements and 2000-count 3-1/2 digit display. VolTect™ Non-
Contact Voltage Detector lets you safely detect dangerous AC voltages. Magne-
Grip™ Holster with magnetic hanging strap that frees both hands for work. TTL logic test for digital circuits and integrated tilt stand for easy bench use.
Resistance and continuity for troubleshooting bad connections and diode test for component level troubleshooting. Data Hold freezes display to "hold" measurement reading. 750V AC/1000V DC is the highest voltage rating in this class of meter.
Part # 15XP-A
35XP Digital MultiMeter
The 35XP is the right choice for HVAC, plant maintenance technicians and residential electricians. Features include VolTect™ Non-Contact Voltage Detector,
Magne-Grip™ Holster, 4000-count resolution, temperature measurement capability to 1000 °C/1832 °F (Type K thermocouple included). 750 V AC/1000 V DC
– highest voltage rating in this class of meter. Capacitance for motor run/start test capacitance. 0.1 µA resolution for flame sensor testing Frequency to 20
MHz. Resistance to 20 M ohms. Continuity beeper and data hold freezes display.
Part # 35XP
XR Series Digital Multimeters
Min/Max, Avg, Rel, Data Hold with 41 segment analog bargraph for measurement analysis. Includes Magne-Grip™ Holster with magnet hanging strap for hands-free operation, test leads with threaded alligator clips, manual, spare fuse and 9V battery. Autoranging,
10,000 count with 0.1% high accuracy. LCR component test functions - Inductance, Capacitance, Resistance. Frequency, Logic
Test, dBm for easy circuit board troubleshooting. Bright blue backlight. CAT III 1000V, UL Listed. Three year warranty.
Part #
30XR-A
33XR-A
34XR-A
37XR-A
38XR-A
38-SWA
VC221B
Description
Non-contact voltage tester
Temp and capacitance
True RMS with temp and backlight
True RMS component logic test
True RMS with optical PC interface
Data Acquisition Software
Carry case
489
Test & Measurement - Multimeters & Accessories
True RMS Measuring Digital Multimeter
Heavy-duty, rugged autoranger. Ten thousand count with bargraph.
True-RMS measuring. Special sealing for environment and water proofing. IP67 and MIL-SPF-28800F rated. Drop-proof special housing and PCB mounting. Extra fusing and protection from accidental overloads. Highest voltage measuring to 1500VDC and
1000VAC. Unique live voltage Safety Tester™. Exclusive, best
"Digi-Glo" backlight. Menu selectable auto max, min, rel, probe hold modes.
Holster included. DC voltage is 10µV-1500V, ±0.1%. AC voltage is 1mV-1000V,
±1.5%. DC current is 10µA-40mA, 1mA-10A, ±0.75%. AC current is 10µA-40mA,
1mA-10A, ±1.75%. Resistance is 1 ohm-40M ohm. Safety tester is 24, 50, 120,
240 and 480V. Diode test and continuity beeper.
Part # HD160C
Heavy Duty Digital Multimeters
Completely sealed and environment proof meters. VDC accuracy of 0.1%. Superior 1500 battery life. Temperature input (Model
HD110T). DC voltage is 0.1mV - 1500V. AC voltage is 0.1mV -
1000V. AC current is 0.1µA - 2A, 0-10A. Resistance is 0.1 ohm -
20M ohm. Diode test and continuity beeper. Model HD110T temperature range is -4°F - 1999°F.
Part #
HD110
HD110T
DC Current
0.1µA - 2A, 0-10A
0.1µA - 200mA, 0-10A
Best digital multimeter for electrical and industrial field work. Special sealing for environment and water proofing. IP67 and MIL-PRF
2880F rated. Drop-proof special housing and PCB mounting. Extra fusing and protection from accidental overloads. Highest voltage measuring to 1500VDC and 1000VAC. Oversized, shock mounted
LC display. Auto-power off. Unique live voltage Safety Tester™.
Holster included. DC voltage is 0.1mV-1500V, ±0.1%. AC voltage is
0.1mV-1000V, ±0.75%. DC current is 0.1µA-10A, ±0.35%. AC current is 0.1µA-10A, ±0.9%. Resistance is 0.1 ohm-20M ohm, ±0.5%.
Safety tester is 24, 50, 120, 240, and 480V. Diode test and continuity beeper.
Part # HD110C
Probe Style Digital Multimeter
Smallest probe style digital multimeter that allows easy, one-hand operation. AC and DC voltage to
600V. Superior 0.5% accuracy. Resistance to 34M ohm. Continuity beeper. Shipped with alligator clip, ground test lead, 2 probe tips
(3" and 1/2" long) and installed batteries. 3400 Count digital display plus analog bargraph. Auto power off. UL 3111-1 approved, meets EN61010-1.
Part # DM73C
Multimeter Carrying Cases
An array of attractive and functional carrying cases and rubber holsters which will protect your digital multimeter as well as keep test leads and meters together.
Part #
DC205B
DC207B
VC12
VC221A
VC30
VC11
Description
Deluxe hard-shell case
Large, deluxe hard-shell case
Padded vinyl case with carrying strap for DM2.
Largest soft vinyl case for XT and LCR55 with holster, 220,
RMS225A, 235, and all HD and 2000 Series meters.
Vinyl case for XL & CR50 with holster, XT's/LCR55 without holster, AM8, DM7, DM9, AC40A and AD40A.
Padded soft vinyl case for DM73B.
490
Test Bench® High Performance DMM
CE Marked and UL Listed. Audible continuity. Ruggedized case.
Auto power off. Designed to meet IEC61010-1 CATIII 600V, Class
2. Accessories included are nine volt battery, test leads, instruction manual and thermocouple probe (Model 390). Three year warranty.
Part #
388B
389A
390A
391A
Description
Manual ranging. DCV accuracy is 0.5%. AC/DC voltage and current. Display digits, count is 3¾, 4000. Features - capacitance measurement, transistor test, logic probe and peak hold.
Auto/manual ranging. DCV accuracy is 0.25%. AC/DC voltage and current. Display digits, count is 3¾, 4000. Features - bar graph (41 segment), capacitance measurement, relative mode, min/max hold, data hold and memory.
Auto/manual ranging. DCV accuracy is 0.1%. AC/DC voltage and current. Display digits, count is 3¾, 4000. Features - bar graph
(41 segment), capacitance measurement, temperature probe, relative mode, min/max hold, data hold, memory and RS-232.
True RMS. Manual ranging. DCV accuracy is 0.05%. AC/DC voltage and current. Display digits, count is 4½, 20000. Features -
Logic probe and data hold.
50,000 Count Premium Digital Multimeter
Incorporate a special 50,000 count integrated circuit for high accuracy (0.025%), basic accuracy, high reliability design. Measure AC volts (True RMS AC, AC+DC), resistance, capacitance and frequency, in addition to dB, duty cycle, pulse width, power line disturbances and temperature. Fuse and battery access without breaking a calibration seal. Models also offer peak hold, hold, relative mode and backlight. Three year warranty. Test leads, spare fuses and instruction manual included. Basic accuracy is 0.025%. Voltage is
750VAC/1000VDC (10µV). Current is 10AAC/DC (10nA). Backlight.
Frequency. Duty cycle. Event counter.
Part # 5390
Dual Display RS-232 Interface Multimeters
A Dual Display 51,000 count digital multimeter with exceptional accuracy and functionality. Offers superb performance with useful features for trouble shooting electronic and electrical circuit or to test and evaluate circuits in a field service application. Features:
Five digit LCD for both the primary and secondary displays. 21
Segment analog bar graph. Automatic polarity indicator.
Resistance measurements up to 500Mohms. Conductance measurements up to 50nS with 0.01nS resolution. Capacitance measurements. Frequency with ACV measurement. Data hold. dBm measurements.
REL mode. 1ms Peak Hold for glitch capture. Conforms to IEC-1010-1 600V
CAT IV and 1000V CAT III. CE Approved.
Part #
2890A
2880B
Features
AC+DC True RMS.
0.025% Basic DCV accuracy. Back lit LCD.
Frequency counter up to
20MHz. Square Wave output with 25 frequency ranges and adjustable duty cycle.
0.03% Basic DCV accuracy
Description
True RMS AC, AC+DC, dMb. dB
Measurement. Selectable impedance.
Temperature to 2502°F (1372°C) with optional TP-A. Conductance. Duty cycle. Square wave output is
16.4/4.8kHz @ 0 to 3V. Timer and signal output: max timer 99k sec @ 0 to 3V. Backlight.
True RMS AC.
Test & Measurement - Multimeters & Accessories
Survivor® Multimeter
Heavy duty 1500 VDC rating. Ruggedized construction. Includes rubber boot, battery, test leads and manual. Withstands 5 foot drop. Extra large, high contrast LCD display. Gasket sealed against dirt and contaminants. Water resistant. High energy fused on all current ranges. Auto power off saves batteries. Builtin probe holders. Non-slip grip. Manual ranging. DCV accuracy of 0.5%. Display digit is 3½. Count is 2000. Large 0.8" LCD display. Extensive overload protection. Five year warranty.
Part # 2860A
Mini-Pro® Multimeters
The unique design fits easily in the palm of your hand and CE approval ensures safe operation. Manual and autoranging models offer the basic functionality needed to do 90% of most required testing. DC/AC voltage to 600V. DC current to 10A. Resistance to
20M ohm (Model 2407A 30M ohm). Diode test. Low battery indicator. CE approved. Battery, test leads and instruction manual included. One year warranty.
Part #
2405A
2407A
2408
Display
Counts
2000
3200
2000
DC
Accuracy
2.0%
1.2%
1.2%
Ranging
Manual
Auto
Manual
Current
10A DC
10A
AC/DC
10A
AC/DC
Features
1.5V and 9V battery test; auto zeroing
Bar graph, auto power off, continuity, data hold
Auto zeroing, continuity, data hold, max. hold, non-contact voltage indicator
4 1/2 Digit True RMS Bench Digital Multimeter
Provides versatility and reliability for a broad spectrum of laboratory and service applications. Being a true Multimeter it can make diode, frequency and continuity measurements in addition to basic current, voltage and resistance measurements. True RMS for accurate interpretation of any waveform signal. 4 ½ Digit
LED display for clear reading in darkest environment. Great overload protection on all ranges. Voltage measurements up to 1200VDC and 1000VAC. Current measurements up to 20A AC/DC. Basic accuracy for DCV is 0.05%.
Part # 2831D
Pocket Digital Multimeter with Bargraph
Analog bargraph. 3200 count LCD display. Auto power off. UL listed. Range and Data Hold.
Operating temperature is 32° to 104°F (0° to 40°C), at 70% RH. Powered by two 1.5V button type batteries NEDA 1166A or equivalent. Battery life is 250 hours. Dimensions (HxWxD) are 4.4 x 2.2 x 0.4"
(112 x 56 x 11mm). Weighs 3 oz (86g) with batteries.
One year warranty. Accessories included are batteries, instruction manual and case.
Part # 2700
Pocket-Sized Analog Multimeter
Compact size. Measure AC/DC voltage, DC current, resistance and decibels. Nine volt and 1.5 volt battery test.
Accessories included are 1.5V AA batteries, test leads and instruction manual. One year warranty.
Part # 117B
20K Ohms/Volt Multimeter
20,000 ohms/volt DC. 28 Ranges. 3½" Mirrored scale. Tests batteries under load and transistors. Accessories included are batteries, test leads (one red and one black), transistor test leads and instruction manual. One year warranty.
Part # 114B
Tool Kit® Multimeters
Excellent meters for most jobs that require flexibility, accuracy and speed. 2000 count. 0.5% DCV accuracy. DC voltage to 1000V.
AC voltage to 750V. DC current to 10A. Continuity. Diode test.
Drop resistant case. Power requirements are nine volt NEDA
1604. Dimensions (HxWxD) are 5.9 x 3.1 x 1.3" (150 x 79 x
33mm). Weighs 9 oz (250g) with battery. Accessories supplied are battery, test leads, instruction manual, thermocouple probe
(2706A only). One year warranty.
Part #
2703B
2704B
2706A
2707A
2708
Ranging
Manual
Manual
Manual
Manual
Auto
Current
10A DC
Features
Basic
10A AC/DC Transistor test and frequency counter
10A AC/DC Transistor test, frequency counter and temperature probe
10A AC/DC Transistor test, frequency counter and logic probe
10A AC/DC Logic probe and backlight
5 ½ Digit Dual Display Bench DMM with 0.012% Basic Accuracy
Selectable count resolutions up to 120,000 count.
Bench-top field service, and system applications with a high performance to price ratio. One set of TL 36 test leads and AC 01 caps for TL 36 are included with each 5492.
Part # 5492
50,000 Count Digit Dual Display Bench Multimeter
Low cost and high performance. True RMS (AC, AC +
DC). Resistance measurements up to 50M ohms.
Measures frequency to 500KHz. DBm measurement.
RS 232 Interface.
Part # 5491A
360 Series Test-Pro® Contractor Digital Multimeters
Sturdy ABS construction. Protective rubber boot. Sleep mode.
Built-in tilt stand. Low battery indication. Overload protection.
Lifetime limited warranty. CAT III - 600V.
Part #
61-360
61-361
61-362
Features
Max hold, data hold
Three phase motor rotation, capacitance, frequency
Auto/manual ranging, analog bar graph
491
Test & Measurement - Multimeters & Accessories
PlatinumPro® 490 Series Industrial Grade Multimeters
Data acquisition. Optical RS-232 interface. Frequency and capacitance. Auto/manual ranging. Analog bar graph. Auto power off. Peak hold. Min/max. Relative mode. Backlight. Low battery indication.
Includes carrying case.
Part #
61-494
61-495
Description
True RMS, data logging (6,000 records), software and cable interface included data storage, temperature, duty factor, dBm/dB, dual display, optional software, low voltage ohm, min/max/avg, 20,000 count high-accuracy mode.
True RMS, data logging (40,000 records), software and cable interface included data storage, temperature, duty factor, dBm/dB, dual display, low voltage ohm, min/max/avg, 20,000 count highaccuracy mode, thermocouple included.
PlatinumPro® 630 Series Technical Grade Multimeters
Data acquisition. Optical RS-232 interface. True RMS. Auto/manual ranging. Analog bar graph. 0.5ms peak hold. Capacitance and frequency. Duty factor. Auto calibration. Auto hold/peak hold. Memory store and recall. Lead input warning. High/low limits. Max/min/maxmin. Backlight. Auto power off. Triple display. Low battery indication and carrying case included.
Part #
61-635
Features
Extended accuracies, software and interface cable included, temperature, thermocouple included.
310 Series Multimeters
IDEAL 310 Series Multimeters are versatile, feature packed and easy to use, and affordably priced. All models feature: AC/DC voltage, current, resistance, audible continuity, temperature, data hold, diode test, easy to read large numbers and symbols. 2 year warranty.
Part # Description
61-310
61-312
61-314
Manual Ranging CAT II-600V
Auto ranging, capacitance, frequency, CAT IV-600V
True RMS, Auto ranging, capacitance, frequency, CAT IV-600V
350 Series Multimeters
IDEAL 350 Series Multimeters feature: a Non-contact voltage tester, AC/DC voltage, resistance, audible continuity, diode test, data hold, diode test, auto/manual ranging, auto power off.
Limited Lifetime warranty.
Part #
61-350
61-352
61-354
Description
CAT III-600V
AC/DC current, frequency
True RMS, Auto ranging, frequency
Test Meters
600 Series Pocket Meters
Low cost, multi-function. Convenient pocket size. Overload protection on all ranges. Lifetime limited warranty.
Part #
61-602
61-603
61-605
Features
Diode test
Battery test, diode test, low battery indication, built-in test stand
Auto ranging, test lead storage, audible continuity, auto power off
320 Series Contractor Grade Meters
Data hold. Auto/manual ranging. Large digital display.
Capacitance and frequency. Isolated battery compartment.
Auto power off. Low battery indication. Probe holder. Rubber boot with tilt stand. Overload protection on all ranges. CAT III -
1000V. Lifetime limited warranty.
Part #
61-320
61-322
61-324
Description
Standard Model
True RMS
True RMS, backlight, data acquisition and RS-232 interface
610 Series Analog Multimeters
Low-cost analog. High-impact thermoplastic case. Decibel measurement. Five year warranty.
Part #
61-614
Features
Audible continuity, battery test, built-in stand
Part #
81-011-1
81-022-1
81-024-1
81-020-1
81-023-1
81-025-1
81-026-1
Type
Analog
Digital
Digital
Digital
Digital
Digital
Digital
Description
Audible continuity checker with db output. hFE test, mirror scale and test leads and battery.
3 1/2 digits. Audible continuity test. Transistor and diode test. Test leads and battery.
3 3/4 digits. Data hold. Bar graph. Audible continuity test. Frequency and capacitance. Transistor and diode test. Protective holster, test leads and battery.
3 1/2 digits. Diode and transistor test. Protective holster, test leads and battery.
3 1/2 digits. Flip-up display. Audible continuity test and capacitance. Transistor and diode test.
Protective holster, test leads and battery.
3 1/2 digits. Data hold. Audible continuity test.
Frequency and capacitance. Transistor and diode test. Test leads and battery.
3 1/2 digits. Data hold. Audible continuity test.
Frequency. Capacitance. Temperature.
Transistor test. Diode test. Comes with test leads and battery.
492
Test & Measurement - Multimeters & Accessories
Digital Multimeters
DM-21 Digital Multimeter
Low cost general purpose multimeter. Transistor hFE. Diode test.
LED test. Square wave generator. Seven function and eleven ranges. 0.8% basic DC accuracy. 3½ digit LCD, 0.55" height. Low power ohm. Overload protection. RF shielded. Polarity indicator.
Low battery indicator. Tilt stand. One year limited warranty.
Battery, test leads (ML-375) and operating instructions included.
Part # DM-21
DM-50 Digital Multimeter
Low cost and multipurpose. Nine functions and twenty ranges.
Frequency counter. Transistor hFE. Battery tester. Diode test.
20M ohm FS. 10A DC. 0.5% basic DC accuracy. 3½ digit LCD,
0.55" height. Audible continuity test. 10M ohm input Z. Low power ohm. Overload protection. RF shielded. Tilt stand. One year limited warranty. Battery, test leads (ML-375), spare fuse and operating instructions included.
Part # DM-50
DM-59 Digital Multimeter
Perfect for workshop and school. Ten functions and thirty ranges.
Frequency counter. hFE. Capacitance. Diode test. 20M ohm FS.
10A AC/DC. 0.5% basic DC accuracy. 3½ digit LCD, 0.55" height.
Audible continuity test. 10M ohm input Z. Overload protection. RF shielded. Tilt stand. One year limited warranty. Battery, test leads
(ML-375), spare fuse and operating instruction included.
Part # DM-59
Analog Multimeters
AM-14 Analog Multitester
Perfect for home, workshop, school and auto. Six functions and fourteen ranges. Pocket sized. ±4% basic DC accuracy. 2 1/4" mirrored scale. Jeweled meter movement. 10K ohm/V DC, 4K ohm/V AC input sensitivity. Fuse and diode protection. Battery test - 1.5V and 9v. Single rotary function/range switch. Color coded scale and panel. High impact plastic case. Ninety-day limited warranty.
Battery, test leads and operating instructions included.
Part # AM-14
AM-22 Analog Multimeter
General purpose VOM. Seven functions and twenty ranges. ±4% DC accuracy
FS. 4" mirrored scale. 20K ohm/VDC, 8K ohm/VAC input sensitivity. Fuse and diode protection. Ten amp DC range. 1000 volts AC/DC. Continuity buzzer.
Battery test. Anti-skid pads. Ninety-day limited warranty. Test leads (ML-375), spare fuse and operating instructions included.
Part # AM-22
AM-10 Analog Multimeter
Pocket sized. Six function and ten ranges. ±4% basic DC accuracy. 2" mirrored scale. 2K ohm/V AC and DC input sensitivity. Fuse and diode protection.
DC current. Resistance. Decibels. Battery test. Ninety-day limited warranty.
Test leads (ML-10) and operating instructions included. Powered by 1.5V AA battery (not included).
Part # AM-10
Digital Multi-Tester
Display is 3 1/2 digit LCD .5" height, with polarity.
Overrange indication is three least significant digits blanked. Maximum common mode voltage is 500V peak. Operating environment is 0 to 50°C, less than
80% relative humidity up to 35°C, less than 70% relative humidity from 35°C to 50°C. Storage environment is -15°C to 50°C. Temperature coefficient is (0 to 18°C, 28 to 50), less than 0.1x applicable accuracy specification per C. Power is 9V alkaline or carbon-zinc battery (NEDA 1604). Battery life is 100 hours typical with carbon-zinc cells, 200 hours with alkaline cells. Dimensions are 126mm long x 7.0mm wide x 24mm thick (4.96" x 2.76" x 0.94").
Part # 903-150N
Which Product Should You Use?
For current measurements above one amp, it’s most common to use a clamp meter.
For measurements less than one amp, it’s preferable to use a standard DMM.
493
Test & Measurement - Clamp Meters
AC/DC Current Clamps
Current range is 1A to 400A AC/DC. Frequency range is
45Hz to 400Hz. Bandwidth is 3kHz. Working voltage is
600V AC rms.
Part # i410
Compatible with any Fluke Scopemeter Test Tool, Power
Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features:
BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM908/001. Current range is 0.1 to 100A DC or 0.1 to 70A AC. Bandwidth is 1Hz to 20kHz. Working voltage is 600V AC rms.
Part # 80i-110s
Fluke 320/330 Series Clamp Meters
Small body and jaws fit perfectly in your hand and into tight places.
Backlight available on most models. Controls positioned for one hand operation. Inrush current feature measures motor-starting current the way a circuit breaker or overload unit sees it (selected models).
Accurate low current measurements. Auto shut-off and display hold.
Includes batteries, test leads, instruction card, safety sheet and carrying case. Three-year warranty on 330 Series and two-year warranty on 320 Series. AC Amps, Ohms, AC volts, Auto-Off.
Part # Description
Fluke 321 Hold, Compact
Fluke 322 Hold, Compact, DC volts
Fluke 333 Hold, Full size, DC volts
Fluke 334 Full size, DC volts, In-rush, Backlight
Fluke 335 Hold, Full size, DC volts, In-rush, Backlight, True-RMS
Fluke 336 Hold, Full size, DC volts, In-rush, Backlight, True-RMS, DC Amps
Fluke 337 Hold, Full size, DC volts, In-rush, Backlight, True-RMS, DC
Amps, Frequency, Large jaw, MIN/MAX
Fluke 902 True-rms HVAC Clamp Meter
Heating, ventilation, air conditioning (HVAC) technicians require a service tool that can consistently keep up with their demands.
The Fluke 902 expands the existing line of quality Fluke clamp meters by delivering the features necessary to diagnose and repair HVAC systems. Combined with True RMS technology and a CAT III 600 V rating, the Fluke 902 helps technicians do their jobs safely and accurately. Temperature, capacitance, DC micro amps.
Part # Fluke 902
Clamp Type Digital Multimeters
(cont.)
Top-of-the-line professional digital multimeter. Eight functions/ 11 ranges. AC and DC. Data and AC peak hold. DC auto zero. Four thousand count. Carrying case included. AC current is 1-600A, ±2.0%.
DC current is 1-600A, ±2.0%. AC voltage is 0.1-600V, ±1.2%. DC voltage is 0.1-600V, ±0.75%. Resistance is 1 ohm-4k ohm, ±1.0%.
Frequency is 1Hz-20kHz. Diode test and continuity beeper. Maximum conductor size is 40mm (1.57").
Part # AC68C
Digital Ammeters
Low cost miniature digital ammeter. Four hundred amp AC range. Four thousand count display with bargraph. Autoranging. Data hold. Autooff. AC current is 1-400A, ±2.0%. Maximum conductor size is 25.4mm
(1.0").
Part # AD40B
Broad range 1000A, AC and DC ammeter. True-RMS. Peak hold and
DC auto zero. Autoranging. Four thousand count. Belt-clip sleeve case included. AC current is 1-1000A, ±1.9%. DC current is 1-1000A,
±2.9%. Frequency is 1Hz-10kHz, ±0.5%. Maximum conductor size is
51mm (2.0").
Part # AD105A
AC Clamp Multimeter with Temperature
Three tools in one: clamp meter, multimeter, thermometer. Digital thermometer 1000 °F (538 °C), Type K probe included. AC/DC 750
V/1000 V and 40 MW resistance. Low DC µAmps for flame rod detector testing. Capacitance to 4000 µF for motor run/start testing.
Continuity beeper and 4000-count large digit display. Auto power off and low battery indicator. Full overload protection. CAT II 1000 V, CAT
III 600 V safety rated. One-year warranty.
Part # AC75B
Current Clamps
CT237
Part # Description
CT235A Input range is 2-1000A. Output type is mV. Conductor size is
31mm (1.22").
CT237A Input range is 500mA-200A. Output type is mV. Conductor size is
19mm (0.748").
CT238A Input range is 10mA-20A. Output type is mV. Conductor size is
19mm (0.748").
Clamp Type Digital Multimeters
Mini-clamp DMM. Four hundred amp range. Six hundred volt AC and
DC range. Four thousand count display with bargraph. Autoranging.
Data hold. Auto-off. AC current is 1-400A, ±2.0%. AC voltage is 0.1V-
600V, ±1.5%. DC voltage is 0.1V-600V, ±1.2%. Resistance is 0.1ohm-
400ohm. Continuity test. Maximum conductor size is 25.4mm (1.0").
Part # AC40B
True-RMS reading. Professional's 600A, AC-DMM. Autoranging. Data hold button. Four thousand count. Carrying case included. AC current is 1-600A, ±1.9% (true-RMS). AC voltage is 0.1-600V, ±1.2% (true-
RMS). Resistance is 1ohm-40kohm, ±2.0%. Continuity test. Maximum conductor size is 1.57" (40mm).
Part # AC65A
494
Test & Measurement - Clamp Meters
Digital Clamp-on Meter
View amperage and voltage simultaneously. Upgradeable to TRMS capability. AC and DC voltage to 600V. AC current to 400A.
Frequency measurement. Diode test. Hold and Maximum reading functions. Temperature measurement. Dual display. Rubber overmolded case.
Part # ACD-14
1000A Digital Clamp-On Meter
Simple to operate and well-suited for most basic applications. TRMS upgradeable. Auto and manual ranging. Relative zero mode. Auto power off. Data hold. Carrying case included. Large, easy to read
LCD display. Diode test. Audible continuity. Accommodates conductors up to 1.77" (45mm) in diameter. Safety CAT III 600V.
Part # ACD-6 Pro
Digital Clamp-On Multimeters
AC and DC voltage to 600V. AC Current to 400A. Resistance to 40M ohms with Continuity Buzzer. Capacitance to 3000 µF. Frequency measurement. Diode test. Accommodates conductors up to 1.02"
(26mm) in diameter.
Part # ACD-10 PRO
400A AC/DC Clamp-On Multimeter
AC/DC Current up to 400A. AC/DC voltage up to 600V. Resistance measurement. Continuity test. Data hold. Max/Min recording. Relative measurement. Backlight. Analog bar graph. Auto or manual range selection. Low battery indication. Accommodates conductors up to
1.18" (30mm) in diameter.
Part # ACDC-400
Digital AC/DC Clamp-On Multimeter
TRMS measurement. AC/DC voltage up to 1000V, AC/DC current up to 1000A, resistance, capacitance, temperature, continuity buzzer and diode test. Dynamic Min/Max/Avg. recording function. In-rush
Peak current capture (1 mS response). Temperature measurement.
Dual display of ºF & ºC readings.
Part # ACDC-620T
Milli-Amp AC/DC Clamp Meter
This meter was designed to measure smaller amounts of current.
Ideal for quick non-intrusive current measurements. Auto power off. 4 digit LCD display. Low battery indicator. Overload protection. Measures
AC/DC volts to 600V. Measures resistance to 10K ohms. One year warranty.
Part # 316
Mini AC Clamp Meter
Display hold. 4 Digit LCD display. 0.98” clamp opening. Overload protection. 600A AC range. Measures current between 5% to 100% full scale. Measures AC volts to 600V and resistance to 200 ohms. One year warranty.
Part # 312B
Mini AC/DC Clamp Meter
Display hold. 4 Digit LCD display. 0.98” clamp opening. Overload protection. 600A AC range. Measures current between 5% to 100% full scale. Measures AC/DC volts to 600V and resistance to 10K ohms.
One year warranty.
Part # 313A
Models 5331A and 5330A Digital Power Clamps
These power clamps offer the capability of AC/DC power and power quality measurement. In addition to watts, VA, VAR and power factor readings, these instruments provide accurate current, voltage and frequency measurements. The unique SmartHold® feature allows a complete set of readings for all seven parameters to be stored and displayed at any instant. A 25 segment bargraph gives an immediate indication of analog values and ranges and allow dual parameter display in Power Factor and Frequency modes. True RMS. Integrated three phase power capability for balanced loads. Includes instruction manual, test leads and carrying case. Two year warranty. Model 5331A additional features: Peak voltage and current value measurement. Total harmonic distortion, distortion factor, crest factor and ripple measurement. Optional digital interface and Windows® software for data logging and digital waveform output for harmonics analysis.
Part # 5330A, 5331A
Clamp-On Multimeters
These clamps are much more than a current clamp, offering the ability to measure, voltage resistance, capacitance and even frequency. Additionally, special features allow for the recording of minimum and maximum values, peak values, test diodes and for continuity. Any one of these products can be a total measurement solution. Measures up to 2000A and 1000V. Jaw opening 2.24" (Models 330B, 350B, 369B). Low battery indication. Accessories supplied are battery, test leads, instruction manual and carrying case. One year warranty.
Part #
330B
350B
369B
367A
AC/DC
Current
1000A/ -
1000A/ -
1000A/1000A
2000A/2000A
AC/DC
Voltage
Resistance
750V/1000V 2000M ohm
750V/1000V 30M ohm
750V/1000V
750V/1000V
40M ohm
40M ohm
Count Resolution
2000
3200
4000
4000
Features
Continuity, diode, data and max hold
Frequency, continuity, diode, bargraph, data, peak and range hold
Frequency, capacitance, true RMS, continuity, diode, bargraph, data, peak and range hold, max/min, relative
Frequency, capacitance, true RMS, continuity, diode, bargraph, data, peak and range hold, max/min, relative
Auto Off
n/a
10 min.
30 min.
30 min.
495
Test & Measurement - Clamp Meters
400 Amp Clamp Meters
Measures up to 400AAC. Non-contact voltage indicator (70V - 600VAC).
Tapered jaws with hook tip. Auto/manual ranging. Data hold. Auto power off. Low battery indicator. Jaw opening is 1.25" (32mm).
Part #
61-732
61-736
Description
400 Amp clamp meter
400 Amp clamp meter with true RMS
1000 Amp Clamp Meters with TightSight™ Bottom Display
Measures up to 1000AAC. Voltage-presence warning on all functions.
Bright bold backlit display. Tapered jaws with hook tip. True RMS.
Max/min. Peak max/min (1 ms). Audible continuity. Selectable auto power off. Data hold. Low battery indicator
Part #
61-772
61-774
Description
True RMS, 1000A (AC only)
True RMS, 1000A (AC and DC), capacitance
600A Clamp Meter with TightSight™ Bottom Display
Measures up to 600AAC. Voltage-presence warning on all functions. Bright, bold backlit display. Tapered jaws with hook tip.
Max/min. Peak max/min (1ms). Audible continuity. Selectable auto power off. Data hold. Low batter indicator.
Part #
61-764
61-766
61-768
Description
Standard unit, 600A AC
True RMS, Frequency through the jaw, capacitance
True RMS, 600A AC or DC current
Current Clamp Adapters
Provide safe, easy measurement of AC/DC current. Extend the current measurement capabilities of digital multimeters.
Part # 61-451
Ground Resistance Clamp Meter
Large clamp size. Simple and fast clamp-on operation - no leads, auxiliary rods or spacing requirements. Direct measurement of ground resistance from 0.01 ohm - 1200 ohm. Direct measurement of ground leakage current up to 30 amps. Tests grounding system without disconnecting the ground rod.
Part # 61-920
4-in-1 Test Tool
Features: True RMS. Non-contact voltage. Backlight. CAT III -
1000V. 200A Current capability. Audible continuity. Diode Test.
Data hold/max hold. Low battery indicator. Overload protection on all ranges. Silicone leads. Sleep mode. Compact head design. Includes carrying case. Lifetime limited warranty.
Part # 61-704
700 Series 200 Amp Clamp Meter
Audible continuity. 200A current capability. Diode test. Data hold/max hold. Low battery indication. Overload protection on all ranges. Silicone leads. Integral lead storage. Audible dangerous voltage warning. Sleep mode. Ergonomic hourglass shape.
Compact clamp head. Includes carrying case. Lifetime limited warranty. Vibration mode to verify AC voltage, harmonics indicator, non-contact voltage, capacitance, CAT III - 1000V rated
Part # 61-702
496
710 Series Analog Clamp Meters
Large, optically clear window. 600AAC current capability. Pointer lock.
Ohm scale on dial drum. Range finder symbols. Safety wrist strap.
Broad frequency response - 50 to 400Hz. Includes carrying case.
Lifetime limited warranty.
Part #
61-561
61-710
Description
Line splitter, direct and 10x sensitivity
Rotary Drum Clamp Meter
740 Series 2000 Amp Clamp Meter
Broad frequency response - 40Hz to 1kHz. Low battery indication.
2000A current capability. Overload protection on all ranges. Includes carrying case. Lifetime limited warranty.
Part # 61-740
Digital Clamp-On Meter
3 1/2 digits. Audible continuity test. Soft carrying case. Test leads and battery.
Part # 81-050-1
NOTES
Test & Measurement - Tone Testing
ABS™ Signal Thrower™
Works with the ABS™ Tester to locate and identify cables. Emits three different types of signals. Auto-off after 3 hours of non-use. RJ-11 modular cord and alligator clip lead sets includes. Includes 6 volt battery.
Part # 62-184
ABS™ Tester
Tone trace feature detects tracing tone signal to locate cables.
Receives and reproduces telephone system dial tone.
Indicates call addressing for correct telephone number.
Polarity indicator tests for correct wiring and power. Volume control adjusts test and dial tones. Used for analog voice system testing and maintenance. RJ-11 modular cord and alligator clip lead sets included. Includes 9 volt battery.
Part # 62-180
TRACETone™ Tone Generator and Amplifier Probe
Test continuity and locates signal of installed wire and cable. Two selectable tone styles to meet personal preference. Tone Generator and Amplifier Probe fit together for easy storage.
Part # 62-140
Tone Generator and Amplifier Probe Kit
Cable tracing kit with advanced new features to give a complete signal tracing solution. Kit includes Tone Generator
(62-160), Amplifier Probe (62-164), carrying case, cable assemblies and flat tip.
Part # 33-862
ABS™ Tester/ABS™ Signal Thrower™ Kits
Kit contents: ABS™ Signal Thrower™ (62-184), ABS™
Tester (62-180), Lead Set (K-8690), Cable Assembly (K-
7919) and hard gray case.
Part # 33-852
Kit contents: ABS™ Signal Thrower™ (62-184), ABS™ Tester
(62-180), Lead Set (K-8690), Cable Assembly (K-7919) and Soft
Pouch (62-105).
Part # 33-854
Amplifier Probe and Tone Generator
62-164
62-160
33-864
Identifies and traces wires or cables within a group. Battery low indicator, 3 types of tone patterns, auto-off after 3 hours of non-use. Available individually or as a kits.
Part # Description
62-164
62-160
33-864
Amplifier Probe
Tone Generator
Kit in soft black pouch
LAN & Telecom Cable Testing Kit
Features and benefits of the RJ45 LAN Tester: True cable mapper identifies open, crossed and shorted connections and connector and cable pin-out. Clear LED display for each pin and shield. Shielded RJ45 modular plug socket. Automatic display of mapping with dual speeds: slow or fast.
Features and benefits of the Tone Generator & Tone Probe Cable Tracer:
Quickly and easily identify cable pair carrying a tone signal. Locate patch and termination point of wire. Audible speaker with adjustable volume control enables use without a butt set. Inductive, high sensitivity probe. Jack for headset and tone generator features an auto-off function.
Part # 1573
Ranger™ DSL-Safe Test Set
Incorporates a built-in amplified speaker, as well as new, advanced features. DigiView™ DTMF Decode allows you to see the digits as a dial-out is in progress and capture those digits. ADLI™ Auto Dial Line Identification - inbound and outbound line identification with caller ID testing. Trafixguard™ - senses digital lines and identifies under and over-voltage conditions. DSL safe. Insta-Talk™
Amplified Speaker with simultaneous intercom capability for talking while testing.
Enhanced memory dialing has alpha and numeric capability. Eight-number memory. Tone and pulse dialing. Microphone mute. Last number redial - 24 digits.
Electronic ringer. Modular cord set attachment. Headset for hands-free use. Auto power-off eliminates dead batteries. LCD shows: on-hook voltage, number dialed, off-hook current, set-up information, stored numbers, battery condition, continuous polarity indication, caller ID, caller waiting/caller ID and caller ID errors. Includes: Ranger™ with ADLI, bed of nails cord set LB35, mini headset
LB40 and nylon pouch LB80
Part #
LB255
LB255BT
Description
Test set
Test set with boot
Lil' Buttie™ Test Sets
Hands-free test set with headset. Tone and pulse dialing.
Microphone mute. Last number redial - 32 digits. Continuous line polarity indication (talk or monitor). Electronic ringer.
Amplified Line Monitor for volume levels comparable to "off hook" operation. Modular cord set attachment. Low battery indicator. Headset jack. Battery powered monitor mode with autooff on dead lines or when disconnected.
Part # Description
LB100
LB110
LB115
Test set with piercing clip set
Test set with bed of nails cord set
Test set with bed of nails cord set and AT&T snap clip
LB110-BT Test set with boot
Lil' Buttie Pro™ Test Sets
Telephone test with LCD readout and voltmeter. Five number memory. Technical support number programmed into memory dial. Tone and pulse dialing. Microphone mute.
Last number redial - 19 digits. Electronic ringer. Amplified line monitor for volume levels comparable to "off hook" operation. Modular cord set attachment. Headset for hands-free use. Auto Power Off eliminates dead batteries.
LCD shows on-hook voltage, number dialed, off-hook current, set-up information, stored numbers, battery condition, continuous polarity indication, Caller ID, call waiting/caller ID, caller ID errors and tone and pulse dialing.
Part # Description
LB220
LB220BT
LB230
Test set with bed of nails cord set
Test set with boot
Test set with bed of nails cord set and AT&T snap clip
497
Test & Measurement - Tone Testing
Resi-Talker™ Test Set
Most economical test set for basic telephone system work. Tone and pulse dialing. Microphone mute. Last number redial - 32 digits.
Continuous line polarity indication (talk or monitor). Electronic ringer.
Amplified line monitor for volume levels comparable to "off hook" operation. Modular cord set attachment. Low battery indicator.
Headset jack. Battery powered monitor mode with auto power off on dead lines or when disconnected. Set includes: Resi-Talker™ and alligator clips cord set LB31B.
Part # LB300
Professional Tone & Trace Field Kits
High Sensitivity Tone Tracer and Multi-Function Tone Generator in a nylon pouch. A closure flap protects equipment; includes both a belt loop and a metal clip ring for multiple mounting options. Kits include:
Tone Tracer - High Sensitivity TT100; Tone Generator - Multi-function
TG100; 7.5" cable assembly with no-fault RJ12 connectors for RJ11 and RJ45 jacks TP20; Round tip for Tone Tracer TT30; Paddle style tip for Tone Tracer TT35; Lanyard; Nylon Pouch - PC200.
Part #
KP100
Description
Cord set with alligator clips TG10
Professional Telco Field Kit
Lil' Buttie Pro™ with bed of nails cord set, High Sensitivity Tone
Tracer and Multi-Function Tone Generator with alligator clips in a nylon pouch. This deluxe combo kit is the créme de la créme of our product line --in a tough nylon kit pouch with a protective flap and velcro closure. It holds all the accessories for the Lil'
Buttie Pro™, the Tone Tracer and Tone Generator. Everything necessary is in one place, ready to go to work. If you are looking for the Rolls Royce of test equipment, here it is. Move up in the world with this deluxe combo kit. Kit includes Lil' buttie Pro™ - LB220;
Bed of nails cord set - LB35; Mini headset - LB40; Two-piece belt clip - LB60;
Tone Tracer High Sensitivity - TT100; Round tip for Tone Tracer - TT30; Paddlestyle tip for Tone Tracer - TT35; Tone Generator Multi-function - TG100; Cord set with alligator clips - TG10; 7.5" cable assembly with no-fault RJ12 connectors for
RJ11 and RJ45 jacks TP20; Lanyard; Nylon pouch - PC300.
Part # KP400
Turbo-Tone™ High Powered Tone Generator
Extra-long distance capability. Detect tone up to 20 miles away. Constant amplitude output for 100% signal strength all the time, no signal decrease as battery discharges. Easily hear signal through walls and enclosures. Multiple tones and power levels for all applications - CAT 5/6, signal wire, coax, and telephone cable. Unbalanced tone mode for longer distances on CAT 5/6 cables. Auto-off for battery conservation. Full talk battery and constant polarity check. Includes adapter cables and carrying case.
Part #
TG200
Description
Includes: Turbo-Tone™ with alligator clips molded cord set, 7.5" cable assembly with no-fault RJ12 connectors for RJ11 and RJ45 jacks TP20, Lanyard and nylon pouch PC150
Latch-Test™ Security/Alarm Tone Generator
A combination advanced tone generator and continuity tester for sensors, switches and circuits used in security/alarm systems. Tone generator features: two tone amplitude levels normal and half, half amplitude is unbalanced for stronger signal on twisted pairs, CAT 5/6 cables, Three distinctly different tones selected from front panel, constant amplitude signal over life of battery for
100% signal strength all the time and auto-off of tone after three hours - no dead battery if left on. Continuity tester features: four continuity modes - normally open (NO), normally closed (NC) indication modes, either latched or direct reading, audible and visual indication of continuity results; audible can be turned of, auto-off after 30 minutes of inactivity. General features: compact, durable case with recessed control panel. High-quality silicon alligator-clips cable permanently attached. RJ jack allows use of modular cable without adapters. Battery low indicator. Lanyard attachment loop.
Part # TG300
Resi-Toner™ Home Networking Tone Generator
"Powers-up" installed telephone lines under actual load conditions with a simulated dial tone to check connectivity and proper wiring configurations without a service connection. Full-feature tone generator with
3 different tone sounds and continuity test. Generates a unique tone sequence for testing speaker installations by "popping" speakers - will work with either
AC- or DC- coupled speaker types. Requires nine volt battery (not included).
Includes: Resi-Toner™ with alligator clips molded cord set, 7.5" cable assembly with no-fault RJ12 connectors for RJ11 or RJ45 jacks TP20 and cord set with alligator clips TG10.
Part # TG400
Resi-Tone and Trace Kit
Includes a Resi-Toner™ and Resi-Tracer™ that work in concert to trace and identify coax, network, telephone and audio cables. Test telephone systems for clarity, and detect coax lines without disconnecting powered systems. Includes:
Resi-Toner™ TG400, Resi-Tracer™ TT300, 7.5" cable assembly with no-fault
RJ12 connectors for RJ11 and RJ45 jacks TP20, cord set with alligator clips
TG10.
Part # KP309
Tone Tracer
Sets a new standard for field service professionals,
Due to its slim, ergonomic design, as well as balanced weighting, it is the most comfortable tracer available. It can be used with either a wearable headset or a standard cell phone headset. Quick-change tips for easier in-field use. Includes low battery indicator. TT100 includes: Tone Tracer, round tip TT30 and paddle-style tip
TT35.
Part # TT100
Resi-Tracer™ Tone Detector and Cable Finder
Traces all types of cable: CAT 5/6, telephone and coax. Audible and visual tone location indication.
Senses speaker phasing when used with Resi-
Toner™ (TG400). Traces coax cable on active systems to eliminate shutdowns. POTS testing with monitor mode and off-hook listening mode. TT300 includes: Resi-Tracer™ and round tip TT30.
Part # TT300
Trace Rite
Trace and tone detector set. Features: Built-in tone generator with 2 different tones and auto-off feature. Tone generator includes a replaceable round tip.
FIne cables behind walls and ceilings. Ideal for residential or commercial use.
Traces all types of cable: CAT 5/6, telephone, coax. Exceptional signal acquisition sensitivity. Audible tone location indication. Identify cabling without damaging its insulation. The tone generator handily stores inside the tracer body.
Adjustable volume control. Recessed ON/OFF button prevents battery drain.
Battery low indicator. Battery cap allows quick and easy battery replacement.
Batteries included.
Part # TT250
498
Test & Measurement - Environmental Testers
Mini Infrared Thermometer
Quick and reliable surface temperature readings. Compact and portable. Single dot laser sighting system allows users to target measurements in less than a second; the large temperature display provides current and MAX surface temperatures. Protective boot and ergonomic grip. Backlit display. Fitted carrying case. Temperature range -30 to 500C (-20 to 932F). Distance to spot 10:1.
Part # Fluke 62
New Fluke 561 HVACPro
Two-in-one infrared and contact thermometer. IR thermometer for quick measurements up close or at a distance. Temp range:
-40°C to 550°C (-40°F to 1022°F). Contact thermometry capability, compatible with all standard mini connector K-type thermocouples. Velcro® pipe probe included for superheat and subcooling and other contact and ambient measurements.
Single-point laster sighting. Easy emissivity adjustment for measuring pipes and ducts more accurately. MIN, MAX and DIF functions.
Distance to spot 12:1.
Part # Fluke 561
Infrared Thermometers
Provides quick, non-contact temperature measurement in a compact case surrounded with a protective holster. Bright laser beam provides easy targeting. Large dual display LCD display. Quality backlight illuminates the screen in the dark.
Part #
Fluke 61
Range
-18 to
275ºC (-0 to 525ºF)
Resolution Repeatability
0.2ºC (0.5ºF) ± 2ºC or ± 2%, whichever is greater
Battery
9V alkaline
(included)
Fluke 60 Series Infrared Thermometers
Ideal for quick and accurate temperature measurements. Backlit display. Holds temperature readings. Log measurements to memory (66, 68)". Enhanced optics (distance to spot ratio up to 50:1) allow you to measure smaller objects from farther away. Displays Min/Max/Average (66,68). Adjustable emissivity setting (66,68). Rugged rubber overmolding. Durable plastic storage case.
Part #
Fluke 63
Fluke 66
Fluke 68
Description
-32ºC to 535ºC (-25ºF to 999ºF)
-30ºC to 600ºC (-25ºF to 1100ºF)
-30ºC to 760ºC (-25ºF to 1400ºF)
Distance To Spot
12:1
30:1
50:1
Fluke 570 Series Infrared Thermometers
Measures surface temperatures, helping to quickly locate potential blockages or malfunctioning systems reducing work and follow-up time. Backlit display.
Holds last ten temperature readings and displays on bar graph. Enhanced optics (distance to spot ratio up to 60:1). Adjustable emissivity setting (all models) and 30 pre-set common material values (574, 576) for more accurate measurements. 100-data point logging for documentation (574, 576). Customizable log names, alarms and emissivity values to personalized measurements (574,
576). Software to log, graph, view photos and analyze temperature measurement locations for improved documentation (576). Durable plastic storage case.
Part #
Fluke 572
Fluke 572-CF
Fluke 574
Fluke 574-CF
Fluke 574-NI
Fluke 576
Fluke 576-CF
Description
Precision Infrared Thermometer
Precision Infrared Thermometer with Close Focus Option with minimum spot of 6mm(24 in.)
Precision Infrared Thermometer with Logging SW
Precision Infrared Thermometer with Logging SW Close
Focus with minimum spot of 6mm(24 in.)
Precision Infrared Thermometer with Logging SW
Nonincendive
Precision, Photographic Infrared Thermometer with Logging
SW
Precision, Photographic Infrared Thermometer with Logging
SW Close Focus with minimum spot of 6mm(24 in.)
GEO Earth Ground Testers
Distinctive earth ground testers that can perform all four types of earth ground measurements: 2 and 3 Pole Fall of Potential (using stakes), 4 Pole Soil Resistivity testing
(using stakes), Selective testing (using 1 clamp and stakes) and Stakeless testing (using 2 clamps only).
Large, clear display and oversized test buttons. For each test, the testers inform you which stakes or clamps needed to be connected. Both have an IP56 rating, suitable for outdoor use. The
1625 includes advanced features: Automatic Frequency Control, R measurement, earthing impedance with 55 Hz and adjustable limited.
Part # Description
Fluke 1625
Fluke 1625 Kit
Fluke 1623
Fluke 1623 Kit
EI-1623
EI-1625
Advanced GEO earth ground tester
Fluke 1625 kit: 1625 tester, 4 earth ground stakes, 3 cable reels with wire, 2 clamps, batteries, manual and carrying case
Basic GEO earth ground tester
Fluke 1623 kit: 1623 tester, test leads, 4 earth ground stakes, 3 cable reels with wire, 2 clamps, batteries, manual and carrying case
Selective/Stakeless Clamp Set for 1623
Selective/Stakeless Clamp Set for 1625
Carbon Monoxide Meter
Large LCD displays CO levels from 0 to 1000 ppm. Beeper triggers with increasing frequency as CO levels rise (Can be silenced in quiet environments). MAX Hold function stores and displays the maximum MCO level. Automatic sensor zeroing and self-test sequence upon start-up. Bright backlight allows easy screen viewing under dim lighting conditions. Automatic power-off after 20 minutes extends battery life. Replaceable sensor extends tools life.
Includes C50 soft carrying case, battery and instruction manual.
Part # Fluke CO-220
Aspirator Kit
Contains all the components necessary to provide a clean sample. Kit includes: Stainless steel sampling tube, industrialgrade hand operated aspirator to draw flue sample, easily replaceable particulate filter and specially designed nose cap for connection to the Fluke Carbon Monoxide probe and meter.
Part # Fluke CO-205
Carbon Monoxide Probe
As an accessory to a digital multimeter with dc millivolt inputs, the
Carbon Monoxide Probe displays CO level readings from 0 to 999 parts per million (ppm), with a resolution of 1 ppm and accuracy of
±5%. Detach cord and the probe acts as a stand-alone device, with an LED indicator and a beeper that triggers with increasing frequency as CO levels rise (The beeper can be turned off when silent operation is preferred). Replaceable sensor extends tool life. Includes C50 soft carrying case, battery (installed) and instruction sheet.
Part # Fluke CO-210
Temperature Humidity Meter
Lightweight, rugged and easy to hold. Backlit dual display of humidity and temperature. 99 record storage capacity. Ergonomic design with belt clip and protective holster. Quick response capacitive sensor with twist-open protective cover. Measures dew point and wet bulb. Includes 4 AAA alkaline batteries.
Part # Fluke 971
499
Test & Measurement - Environmental Testers
Particle Counter
Measures and displays six channels of particle size distribution.
Holds 5000 logged samples including date, time, counts, sample volume, temperature and relative humidity. Data is easily downloaded using the included Windows® compatible utility software. Invaluable for IAQ investigations, allowing you to determine size distribution of airborne particles or track down a particle source. Includes:
Certificate of Calibration (NIST), Windows compatible software, DB9 to RS-232 adapter and cable, isokinetic probe, high purity tubing, 1/8 in. hose barb adapter, power supply, operation manual, zero count filter, protective holster and hard molded plastic case.
Part # Fluke 983
Dual Input Digital Thermometer
This dual input digital thermometer with triple display is Ideal for
HVAC/R technicians, electricians, research, industrial process, quality control. Dual inputs for easy super-heat and sub-cool temperature measurements. Measures to 3200 °F/1760 °C. Accepts Type J, K, T,
R, S, E inputs and relative time stamp feature. Triple display of T1,
T2, T1-T2, and relative time stamp and backlight. Deluxe hard carrying case, two Type K probes.
Part # TMD90A
Environment Testers
Infrared Thermometer
Laser pointer for accurate targeting. Measuring to 500°F (260°C), front panel switchable. Narrow 10:1 field of view measures 1" at 10" distance.
Large 3-1/2 digit display with backlight feature. Data hold, low battery indicator. Fixed emissivity at 0.95. Certified to meet CE EN60825 Class II for laser safety. Case is rugged valox plastic in ergonomic design for holding ease. Battery hatch cover to easily replace batteries. Shipped with carrying case, four AAA batteries installed and operator's guide.
Part # IR610A
Digital Light Meter
Measures wide range of light up to 20,000 fc or lux, front panel switchable. Accurate, high resolution of 0.01 fc/lux. Sensor dome has 45" attached cord for measurement flexibility. Built-in CIE spectrum curve for accurate human eye response. Peak and data hold. Large 3-1/2 digit display with backlight feature. Meets CE EN61326-1 certification for safety ratings. mV analog output for recording measurements. Case is rugged valox plastic in ergonomic design for holding ease. Battery hatch cover to easily replace batteries. Shipped with carrying case, extra lens cover, four AAA batteries installed and manual.
Part # LM631A
TM45 Thermometer
Ideal for HVAC/R contractor, plant maintenance or commercial building service. unique, mini-stick design thermometer. Small, go-anywhere size.
Type K thermocouple compatible. °F/°C and 1° /0.1° selectable. Data and max hold. Type K bead probe and carry case with belt loop included.
Part # TM45A
Relative Humidity & Temperature Meter
This meter features relative humidity measurement from 0 to 100% and
°F or °C selectable. Relative function monitors humidity and temperature changes. Large dual display of RH and temperature and built-in capacitive sensor with protective cover. Complete with carrying case, battery and wet bulb chart. Additional features are auto power off and
Min/Max/Data hold.
Part # TH-3
Compact Digital Lightmeter
This instrument is a portable, easy-to-use, 3 1/2 digit, compact-sized lightmeter designed for simple one hand operation. It provides measurement in lux and fc units. Meter has a backlit LCD display, PEAK-
HOLD (50mS pulse light) and DATA-HOLD feature. Operating temperature and humidity is 32°F to 122°F (0°C to 50°C) at 70% RH.
Storage temperature and humidity is -4°F to 140°F (-20°C to 60°C), 0 to 80% RH with battery removed. Power supply is a nine volt battery.
Battery life is 200 hours typical. Dimensions (HxWxD) are 7.5 x 2.6 x
1.4" (190 x 65.5 x 35mm). Weighs 7.76 oz. (220g). One year warranty.
Part # 615
Thermo-Hygro Meter
Compact-sized digital Thermo-Hygrometer designed for simplicity and one hand operation. It can measure and display an environment temperature and humidity in a fraction of a second. Backlight. Display and max. hold. Measurement temperature range is -4° to 140°F (-20° to 60°C). Humidity is 0% to 100% RH. Resolution temperature is
0.1°F/C. Resolution humidity is 0.1% RH. Basic temperature accuracy is +1°F/C. Basic humidity accuracy is +2.5% RH. Temperature sensor type is thermistor. Humidity sensor type is electronic capacitance polymer film sensor. Sample rate is 2.5 times per second. Operating temperature and humidity is 32° to 131°F (0° to 55°C), at 75% RH. Storage temperature and humidity is -68° to 131°F (-20° to 55°C), 0 to 80% RH with battery removed. Dimensions (HxWxD) are 7 x 2.6 x 1.4" (178 x 65.5 x 35mm).
Part # 625
K-Type Thermocouple
Portable 3½ digit, compact-sized dual input digital thermometer designed to use external K-type thermocouples as temperature sensors. This unit can display the temperature difference between two inputs. Backlight. Display and max. hold. Temperature range is -
58° to 2000°F (-50° to 1300°C). Resolution is 1°F/°C, 0.1°F/°C.
Basic accuracy is +(0.3% rdg + 1°). Sample rate is 2.5 times per second. Operating temperature and humidity is 32° to 122°F (0° to
50°C), at 80% RH. Storage temperature and humidity is -4° to 140°F
(-20° to 60°C), 0 to 70% RH with battery removed. Dimensions (HxWxD) is 6.1
x 2.6 x 1.4" (156 x 65.5 x 35mm).
Part # 630
500
Test & Measurement - Environmental Testers
Infrared Thermometer
Portable, easy-to-use three digit, compact sized infrared digital thermometer with laser pointer, designed for simple one hand operation.
Meter comes with backlit LCD display, auto-hold function and auto power down (20 seconds approximately) after releasing MEAS button to extend battery life. Laser pointer. Reading hold. Adjustable emissivity. Measurement range is -4° to 1022°F (-20° to 550°C).
Resolution is 1°C/F. Accuracy is +2% of reading or +6°F (3°C), whichever is greater. Spectral response is 6 to 14µm. Emissivity is 0.10 to 1.00
by steps of 0.01. Field of view is 2.5" Ø at 39" (65mmØ at 1000mm). Sample rate is one time per second. Operating temperature and humidity is 32° to
122°F (0° to 50°C), at 70% RH. Storage temperature and humidity is -4° to
140°F (-20° to 60°C), 0 to 80% RH with battery removed. Dimensions (HxWxD) are 6.7 x 2.6 x 1.4" (170 x 65.5 x 35mm).
Part # 635
Dual Input Digital Thermometers
Two fully functional, highly accurate meters offer dual K-type thermocouple inputs, RS-232 output port, and large LCD displays. Both units offer min/max, data hold, °C/°F readings, auto power off. Measurement range is -328° ~
2,498°F (-200° ~ 1,370°C). Resolution is 0.1°F (0.1°C). Accuracy is ±0.2%rdg +
2°F (±0.2%rdg + 1°C). K-type thermocouple sensor type. Input protection is
60V DC or 24V rms AC maximum. Sample rate is one time per second.
Operating temperature and humidity is 32° ~ 122°F (0° ~ 50°C) and 10 ~ 80%
RH. Storage temperature is -4° ~ 140°F (-20° ~ 60°C). Power supply is a nine volt NEDA 1604 battery (optional adapter BE-9). Battery life is approximately
100 hours (alkaline). Dimensions (LxWxH) are 7.24 x 2.52 x 1.18" (184 x 64 x
30mm). One year warranty. Accessories supplied are instruction manual, battery, two bead probes and carry case.
Datalogging Temperature Meter
Provides a triple LCD display that shows T1, T2 and T1-T2 simultaneously. Datalogging RS-232 port with cable and software that can log up to 16,000 data points with an adjustable interval of 00m:01s to
59m:59s. Time reading. AC adapter port. Weighs 11.3 oz. (320g).
Part # 715
Temperature Meter
Dual display where T1 and T2 can be switched between the large and small digits. While T1 - T2 is displayed on the large digits, T1 and T2 alternate on the small digits. With the optional ThermoLink software and RS-232 cable (AK-710), meter becomes a real-time datalogging meter when attached to a PC. Relative function.
Avg/Max/Min readings. AC adapter port. Weighs 1.66 lbs (760g).
Part # 710
Anemometer with Wand Probe
A mechanical vane on retractable cord anemometer designed to measure airflow and air temperature. Auto power off. Data Hold.
Back light display. CE approved.
Part # 731A
Sound Meter
Whether you are testing for OSHA compliance, quieting equipment, or monitoring the roar of a stadium crowd, this meter can get the job done. Provides 30 ~ 130 dB capability in three convenient measurement ranges - Low, Med and Hi - with an accuracy of ±1.5 dB. Meets the IEC 651 Type II and includes frequency weighting A & C and fast and slow time weighting. Two auxiliary ports provide either AC output,
1Vrms full scale, or DC output, 10mV/dB. Four digit LCD, resolution
0.1 dB update cycle 0.5s. Electret condenser microphone with windscreen. Max/min function. Low battery indication. Power supply is a nine volt
NEDA 1604. Dimensions (LxWxH) are 10.83 x 2.52 x 1.18" (275 x 64 x 30mm).
Weighs 1.56 lbs. (710g). Instruction manual, battery, carrying case, calibration screwdriver and windscreen are supplied. One year warranty.
Part # 732
Temperature Adapter
This self-powered adapter turns your multimeter in a thermometer. Measurement range is -58° - 1832°F (-
50°C - 1000°C). Input impedance of the meter must be at least 12k ohm, and the range must cover 0 to 1VDC (analog or digital).
Uses K-type thermocouple. The TP-29 general purpose temperature probe is included. °F/°C selectable. Measures temperature of any surface, liquid or gas.
Open probe warning.
Part # TP-30B
Infrared Thermometer
Built-in laser pointer. 15:1 angle of viewability. Backlit display. Sleep mode. Measures temperatures from 0°F to 500°F (-18°C to 260°C). Five year warranty. Includes carrying case.
Part # 61-682
Stick Digital Light Meter
Wide lighting range. Remote light sensor. Cosine and color corrected. Compact and lightweight. Low battery indication. Five year warranty. Includes carrying case.
Peak hold, digital and analog output, foot candle and lux measurement.
Part # 61-681
501
Test & Measurement - LAN
Network/PC Cable Tester
Stand-alone test device. Designed to test popular PC data cables, printer, monitor, modem, mouse extension, game,
BNC coax, RJ45, 1394 and USB cables by identifying the wire connection status. Quick and easy to use. LED display. Auto and manual modes. Reverse test. One year warranty.
Part #
206
Power
Source
9V battery
Dimensions (HxWxD)
1.65 x 8.55 x 5.5" (42 x
217 x 140mm)
Standard
Accessories
Manual, battery
LANTEK® 6 and LANTEK® 7 LAN Cable Certification Testers
Sweeps up to 1 GHz. TDR capability. Permanent link testing.
Link adapter fits into case. Display or remote unit can inititate
Autotest, Escape and Talk feature. PCMCIA dual slot provides for CompactFlash™ external memory. USB and RS232 ports.
Certifier - Basic: Soft carrying case, display/remote unit with battery, LANTEK Reporter Software, serial and USB cables, two talksets and two AC wall adapters, user manual, two Cat 6 channel adapters and reference patch cords. (LANTEK 7 also includes two category 7 channel adapters and 7 reference patch cords.) Certifier - Premium: Same as Basic with hard carrying case plus PCMCIA adapter, 32 MB compact flash, USB port flash reader for PC, two extra batteries and offline dual bay battery charger.
Part #
LANTEK 6B
LANTEK6APREM
LANTEK7GBAS
LANTEK7GPREM
Description
Certifier - Basic
Certifier - Premium
Certifier - Basic
Certifier - Premium
LinkMaster™ PRO Tester
Map, test and troubleshoot data and voice communication cable and coax runs.
Tests UTP for shorts, opens, miswires, reversals, split pairs and shield continuity.
Up to four different tones. Snap-off battery cap.
LinkMaster™ PRO Economy Kit
MiniTracker™ Tester
Identifies, or "maps", different cable end points and cable runs within a structure by identifying remote terminator color code.
Tone Mode can be used to send a tone signal on coaxial cable for tracing. Designed specifically for cable TV, security video, broadcast and building/home automation system applications.
Single run/multi-run testing ability. Includes 4 F-type terminators.
Part # 62-202
LinkMaster™ Tester
Tests wiring configurations on UTP/STP cables for split pairs, opens, shorts, reversals and miswires.
Shield detection feature tests cable shield integrity.
Part # 62-200
LinkMaster™ Pro XL Tester
Advanced version of the LinkMaster PRO™ that adds the following features: blinks the hub, backlit LCD screen, displays length measurements with test results, remotes have both RJ-11 and RJ-45 jacks.
Part #
33-880
33-881
33-887
Description
LinkMaster Pro™ Kit with 8 remotes
LinkMaster Pro™ Kit with 8 remotes & ABS Tester
LinkMaster Pro™ Economy Kit with 1 remote
SIGNALTEK™ Cable Qualification Tester
Qualify the performance of twisted pair cable lengths for
10/100/1000Mbps service. Know whether installed cable is capable of handling data without loss for today’s demanding applications and environments. One button Autotest simplifies test procedures. Stores 20,000 tests internally, prints results directly to a USB printer. Export and view results in XML format. Simple test organization and storage of results allows installers to have proof that their installations were done correctly. Combines many of the features of an economical wiremapping product and a professional certification tester into one powerful and easy to use tester.
Part # 33-974
Part #
33-835
33-836
IA-4868
Description
Kit with unshielded jumper cables
Kit with shielded jumper cables
Replacement small case only
LinkMaster™ PRO Kit
Part #
33-825
33-826
H-3324
Description
Kit with unshielded jumper cables. Includes 8 remotes.
Kit with shielded jumper cables
Replacement large case only
Accessories
Security Kit - 8 position modular adapter and 8 RJ-45 to alligator clip lead sets
Part # LA-4157
SoHo Cable-Check™
Combination tester designed for smart home installations to test continuity of network and coax cables. Tests RJ45 patch cords and network installations to identify good connections, opens, shorts or cross-connections. Identifies data and telephone connection schemes. Maps cable pin-out. Tests continuity of patch cords and installed cable runs. Identifies good connections, opens and shorts. Easy-to-use with clear LED readouts. Includes: 2 RJ45 patch cords, 75-ohm male terminator, cable TV “F” female adapter, 9V battery and durable nylon carrying case.
Part # 1578
502
Test & Measurement - LAN
PC Cable-Check™ Pro
Maps cables, detects good connections, opens, shorts or crosses.
It works with over 20 types of cables including: LAN & telephone,
Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2 keyboard & parallel printer. Rubber feet to prevent slipping. Rugged case now with built-in handle. 9V battery included.
Part # 1577
LAN ProNavigator™ Network Data and Coaxial Cable Tester
Two-piece tester includes main unit and remote with results at both ends. One button, simple testing
(PASS/FAIL or fault find). Traces wires with tone and remote lights. Quick fault analysis on coax and data cables. CAT-5 or CAT-6 (UTP/ STP) cable testing.
Detects opens, shorts, crossed wires and split pairs.
Compact and lightweight. Comfortable to hold. Designed and manufactured in the USA. Test status at both ends (main unit and remote).
Part #
1543
Description
901066
LAN ProNavigator test set (main & remote), 2 RJ45 patch cords,
2 belt clips
LAN ProNavigator test set (main and remote), 2 RJ45 patch cords, 2 BNC coaxial cables, 2 CATV "F"-to-BNC adapters, 1
BNC/BNC adapter, 1 shielded RJ45 coupler, 2 belt clips in durable case
LAN Cable-Check™
This continuity tester for UTP, STP and flat satin cables with RJ45 terminations tests both data and telephone connection schemes including patch cords and installed cables. This tester identifies good connections, opens, shorts and cross-connections. Identifies cross-over telephone connections. Slow or fast scan speeds. Two (2)
RJ45 patch cords, 9-volt battery and a durable nylon carrying case with belt loop included.
Part # 1574
Data/Link ID & Cable-Check™
This handy unit is a multi-purpose continuity tester and network identifier. Tests both data and telephone connection schemes, including patch cords and installed cables to identify good connections, opens, shorts and cross-connections. Identifies data and link transmission speeds with real time detection: 100 MB and 10 MB. Detects the following:
PC (NIC) and HUB data transmissions and PC (NIC) and
HUB NLP or FLP link pulse. Slow or fast scan speeds. Two
(2) RJ45 shielded patch cords, 9-volt battery and a durable nylon carrying case with belt loop included.
Part # 1576
Modular Continuity Link Testers
Link Tester for RJ11 & RJ45 Mod Cord
Part # PT-LK-TEST-6/8
Remote Cable Testers
For wires continuity, miswiring and polarization in your network cables, thin Ethernet (BNC) / 10Base-T
(UTP/STP) 356A / TIA-568A / TIA-568B & Token Ring.
Using the attached remote terminator can easily test the cable before or after the cables are installed. Also allows testing of the ground of Shielded Twisted Paired Cable.
The Test Jacks are a BNC Female and a RJ-45.
Part # TSR-NETCBL
Tri-Porter - Network Qualification & Testing Tool
Provides a full range of physical wiring tests for the fast, efficient delivery of IP-based voice, data and video services in the home or small office with one integrated tool.
Tri-Porter replaces up to 6 traditional testing tools. Testing and verifying IP-based services in your customers’ premises now takes less time and is more convenient and economical than ever before. Coax runs, network systems and voice/telephony lines are all easily tested and verified for service levels to assure optimal performance. Comes with a handy carrying case, which holds both the main unit and the remote tester/tracer, along with the 20-piece wiremapping sets for remote discovery of telephone, coax, and network cables.
Part # IVT600
LanScaper™ Network Tester NT700
Identifies port services including Ethernet, ISDN,
POTS, and Token-ring while reporting such crucial information as network speed, capability, and location of other network devices. Pinging function verifies connectivity to network devices and queries PC/NICs.
Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies
(maps) remotes while cable testing. Conducts link tests to ID speed. Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper™ units, which exercises the run and reports the result. Automatically accesses DHCP host and obtains network information. Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals. Identifies HUBs, NIC, or auto MDI/MDI-X devices. Blinks HUBs to ascertain connected configuration. Displays advertised network speed/duplex.
Measures and reports any voltage on lines. Wiremaps network connections with remote identifiers. Generates multiple tone levels for signal tracing and cable identification.
Part # NT700
Tell-All Indicator
Identifies telephone and data lines. Identifies 10Base-T, Token Ring and 100Mbit Systems. Includes a built-in battery. Detects voltage and polarity.
Part # TP100
LanScaper™ Kit
Includes LanScaper™ and remotes #1-#8, Tone tracer, 12" cable assembly; RJ45 to alligator clip set and 2 pieces
TP40, unshielded RJ45 connectors and 2 pieces TP56,
RJ45 to F connectors, 7.5" cable assembly with no-fault
RJ12 connectors for RJ11 and RJ45 jacks and carrying case.
Part # NT750
Resi-Tester™ Whole-House Cable Tester
Designed exclusively for all the wiring environments found in Home
Networking and Home Automation. CATV, telephone systems, audio cable, security/alarm wiring, and network cabling can all be tested and located using the Resi-Tester™ and optional room identifier sets. Resi-Tester™ displays cabling results using a large easy to read LCD with clear concise information showing all the faults connected with the various cable types. It warns of voltage on lines and shows a Pass or Fail message after each test.
Part # TP300
LanRoamer Tester/Analyzer
Cable test results displayed on main unit and remote unit, in less than 2 seconds after plugging in the cable. Auto-on and auto-off when testing cables, just plug both ends into tester! Snap-together case for easy storage and convenient patch cable testing. Tone generator mode for use with tone tracers. Test for short, opens, miswires, reversals and split pairs.
Part # TP500
503
Test & Measurement - LAN
Validator™ Network/Cabling Certifier NT950
Tests to TIA 568/570 interconnect standards. Certifies CAT5,
CAT5E, and CAT6 cables to be IEEE compliant to one gigabit speed. Tests coax, telephone, audio, and security cables. Powerful
Plan-Um™ design software included. Creates and prints job reports. Wiremap new or existing cable systems. Simple to use.
The kit includes: Validator™, Smart Remote, (2) lithium ion rechargeable long-life batteries, (2) AC adapter/charger units, (4) adapter cable assemblies, USB cable assembly, compact flash card, Plan-Um™ design layout software and deluxe carrying case with cushioned sides.
Part # NT950
Testifier™
Condition: Testifier shows Opens, Shorts, Miswires, Split Pairs,
PASS and FAIL results fast - on a clear, full alpha/numeric LCD display. Location: Testifier is supported by the most comprehensive set of wiremapping locators in the world. Up to 20 cable end locations at a time can be identified and tagged. Position:
Testifier's built-in tone generator is the most flexible and function-packed tone generator you will ever use. Its configurable signal can be generated to find and fix the position on any type of cable - either exposed or hidden, in ceilings or behind walls. TestifierTM represents the best of 21st century testing technology.
Part # TP350
Validator-NT™(NT955)
Tests interconnect specifications per TIA 568/570, including opens, shorts, miswires, split pairs, etc. Validator NT™ Main
Unit and Smart Remote, 2 lithium ion rechargeable long-life batteries, 2 AC adapter/charger units, Test Connectors 8-position shielded modular jack (data), 6-position modular jack (telephone), F-coax (video), and dual banana jack (security, speaker, etc.) USB cable assembly, 64MB Compact flash card, Plan-
Um™ design layout software, Cable Certification Labels (roll of
100), Set of 8 network remote identifiers, and 2 Sacrificial Cable modules (RJ
45). Deluxe carrying case with cushioned sides.
Part # NT955
LanRoamerPRO™ Kit With 8 Remote Identifiers
Kit includes LanRoverPRO™, remotes #1-#8, 12" cable assembly, RJ45 to alligator clip set TP40, RJ45 to coax adapter, 12" assembly, unshielded RJ45 connectors, wire configuration sticker, laminated quick reference card and carrying case.
Part # TP607
LanRoamerPRO™ Tester/Analyzer
Measures cable length as a stand-alone function. Test for short, opens, miswires, reversals, and split pairs. Identifies multiple faults clearly without interpretation. Clear wiremapping form displayed in 2-line, 16-character LCD display. Auto-off/Auto-on - Up to 10 times better battery life than others testers. On-ended testing with Pre-test mode for fast results. Built-in tone generator with selectable tones and pair capability.
Part # TP600
Coax Mapper
Designed for testing CATV and security camera coax connections and installations. Finds and identifies multiple coax cables.
Includes four color-coded F-connectors and BNC adapters and a built-in tone generator.
Part # CX200
Ethernet Cable Tester
NetRite. Low cost. Extremely easy to use. No buttons—
Auto-off, Auto-on. Just plug-in an ethernet cable to the main unit and remote—it is tested for opens, shorts, split pairs, miswires and reversals. Removeable remote enables testing longer cable runs terminated in different areas. Tests up to 1000 ft! Full LCD display shows all test information clearly.
Shows cable faults per TIA568 specifications. Batteries included.
Part # TP250
Plan-Um AP Software
Make every cabling installation more professional and profitable with Plan-Um® AP software. Makes any cabling installation, either existing or new, better documented and better designed. Layout and document your cabling projects easier than ever. Layout your customers’ residential and/or commercial floorplans in minutes. Or import AutoCad or Visio images of existing site drawings. Print the layout and cable test schedule, for the customer or your records. Print custom labels to identify cable runs as you test them. Compatible with Brother label printers.
Part # PS150
Test & Measurement - Circuit Voltage Testers
Fluke T-Series Electrical Testers
Fluke T5 Voltage, Continuity and Current Tester. Excellent front-line troubleshooting and measurement tool. Available in 600 V and 1000 V models. Digital display. OpenJaw™ current measurement. Rotary switch selects volts, amps and ohms functions. Heavy duty test leads.
Includes detachable probes and instruction sheet.
Part #
Fluke T5-600
Fluke T5-1000
Description
600 V Voltage, Continuity and Current Tester
1000 V Voltage, Continuity and Current Tester
504
Volt Alert™ Voltage Detector
Easy to use - just touch the tip to a terminal strip, outlet or cord. When tip glows red and the unit beeps, there's voltage in the line. Quickly test for energized circuits and defective grounds on the factory floor, in the shop or at home. The 1AC-II continually tests its battery and circuit integrity with a periodic double flash visual indication using Fluke Voltbeat™ technology. The 1AC-II and
1LAC-II are Cat IV - 1000 V overvoltage rated products for added user protection. Two year warranty.
Part #
Fluke 1AC-A1-II
Fluke 1LAC-A-II
Fluke 1AC-A1-II-5PK
Description
AC V Detector 90-1000V
Low Voltage Detector 20-90V AC volt Alert, 5-pack
Test & Measurement - Circuit Voltage Testers
ST101 Socket Tester
Features include fast, easy socket test and easy to read light indicators. Confirm proper wiring and operation of AC socket. GFCI circuit trips to confirm tester is working. For use on 110-125 V AC.
Part # ST101A
ST102 GFCI Socket Tester
Test GFCI breakers for proper wiring and operation with this socket tester. Easy to read light indicators show common wiring problems. Confirm GFCI socket is wired for protection. GFCI circuit trips to confirm tester is working. For use on 110-125 V ac.
Part # ST102A
VT101 Voltage Tester
Features include bright neon light indicates AC voltage and identifies AC Voltage from 90-500 V AC. No battery needed. Tests 2 wire and 3 wire AC outlets.
Part # VT101A
VT102 Voltage Tester
Features include 4 bright neon lights indicate AC voltage, 4 ranges indicated from 110 V to 460 V AC. No battery needed.
Tests 2 wire and 3 wire AC outlets.
Part # VT102A
VT201 Non-Contact Voltage Detector
Safe non-contact detection of voltages from 70 V to
440 V AC. Both visible and audible indicators. Detector emits loud audible chirping that changes pitch based on probes proximity to the AC voltage source. Bright flashing LED also indicates presence of AC voltage.
Batteries included.
Part # VT201A
Tic Tracers - AC Voltage Detectors
Used to check fuses, breaker panels, power outlets, load break connectors, transmission lines. Operating temperature is 32º-125ºF (0º-52ºC). UL, CE and MSHA approved.
Part #
TIF100
TIF300CC
TIF300HV
Features
AC Voltage: 30-1500 AC
AC Voltage: 30-1500 AC, Capacitance: 0-100 mF, Continuity:
0-1m ohm
AC Voltage: 30-121,000VAC. Hot Stick: TIF410.
Non-Contact VoltProbe®
Detects AC voltage (110-600V). Uses non-contact method of voltage testing. Totally insulated, no exposed metal or conductive parts.
Checks for AC voltages without necessity of disconnecting the electrical system. Tests for AC voltage cables, circuit breakers, wall sockets, junction boxes, fuses, etc.
Part # VP-440
Hot Stick
Made to provide you with extra safety and protection when working near high voltage circuits or equipment. Built with a two-piece
'snap-in' construction, which covers both 36 to 48 inches in length.
Part # TIF410A
Phase Sequence & Motor Rotation Tester
Used to assure proper and safe connection of the electrical equipment on three-phase systems. Phase voltage loss or voltage sag indication. Check for normal or reversed phases. Three phase motor rotation indication (PRM-3 only). Extremely simple to use. CAT III 600V.
Part #
PRM-2
PRM-3
Description
100-600 V
50-600 V
Continuity Tester
Bulb lights when circuit is completed. For use with unenergized circuits.
Part # PY-11
Model HV-44A
A self-contained instrument that measures high DC voltages up to
+40KV. This probe is typically used to measure high voltages in TV sets, power supplies, laboratories and for general high voltage commercial applications. Input impedance is 600M ohm, nominal.
Accuracy is ±3% of full scale. Calibration is internal, factory calibrated at 25KV. Size is 16.5 x 2.125 x 2" with a 34" long ground cord (419 x
54 x 50mm with a 86.4 cm long ground cord). Probe tips: two interchangeable tips; one round needle type and one special flat spring type for easy access to
CRT anode. One year warranty.
Part # HV-44A
Automatic Circuit Identifier with E-Z Check® Plus
Works on 120/240VAC circuits. Receiver has a non-contact voltage sensor for 80-300VAC built in. Positively identifies circuit breakers and fuses without service interruption.
Hand-held receiver. Visual and audible indicators. Five year warranty. Microprocessor controlled sensitivity level, verifies proper wiring and checks GFCI operation.
Part # 61-534
Power-Glo™ Testers
Tests for voltage from 40V to 440VAC. Locates breaks along live, insulated wires and power cords, checks for energized AC circuits, distinguishes polarity and detects leaks in underground devices. Illuminates brightly for quick, accurate test results. Audible voltage detection (61-061). Five year warranty.
Part #
61-060
61-061
Description
Power-Glo™ Pocket Tester
Power-Glo™ Audible Pocket Tester
Volt Sensor Pocket Tester
Checks non-contact voltage from 40 - 600 VAC.
Audible and visual indication. Tests for energized circuits. Over-molded rubber cushion grip. Compact rugged housing.
Part # 61-063
505
Test & Measurement - Circuit Voltage Testers
Split Jaw™ Smart Meter
Automatically senses and displays V, A or Ohms. No dial to set - easy to use. Cat IV-600V. Measures 0-200AAC and 0-
600V AC/DC. Audible continuity. Data hold and integral lead storage. Replaceable test leads. Auto power off and low battery indication.
Part # 61-096
Vol-Con XL® Tester
Extremely rugged and reliable three-in-one tester. Vibrates when voltage is present. Tests for high voltage up to 600V
AC/DC. Tests for voltage as low as 6V AC/DC. Automatic switching continuity tester. Replaceable leads with shielded probe tips. Bright, long-life LED and neon indicators. Five year warranty.
Part # 61-086
SureTest Circuit Analyzer
Super bright OLED display. Features arc fault testing, true
RMS, voltage drop (12, 15, 20-amp load), line voltage, peak voltage and frequency. Also features ground impedance, hot and neutral conductor impedance and ground-neutral voltage. Identifies proper wiring in 3 wire receptacles and false ground. GFCI testing.
Part # 61-165
Wire Sorter
Easily sorts up to six single or six pair of unpowered wires with or without a known ground path. Quickly identifies unmarked wiring. Locates proper wiring in bundled groups.
Works on non-energized circuits. Five year warranty.
Includes TL-65 lead set.
Part # 61-530
Test & Measurement - Insulation Testers
Fluke 1550B MegOhmMeter™
Measures up to 1 Tera-Ohm. Guard system eliminates the effect of surface leakage current on high-resistance measurements. Measures cable or insulation capacitance and leakage current. Automatically stores test data in up to 99 locations. High-capacity rechargeable batteries. Includes Quicklink
1550B software and optical interface cable for downloading to a Windows® PC.
Custom soft case for tester and accessories and includes heavy-duty leads, probes and alligator clips with a two year warranty.
Part # Fluke 1550B
AMB-45 MegaTest 1
Digital Megohmmeter-Insulation Resistance Tester. Tests insulation of wires, cables, transformers and electrical motors. Comes as a complete kit including test leads and PC software. Selectable test voltages up to 1000V. Data download to PC. Safety CAT III 600V.
Part # AMB-45
Analog Megohmmeter-Insulation Testers
Tests insulation of wires, cables, transformers and motors.
Battery powered. Helps cut unscheduled downtime and reduce shock hazards. Sensitive Ohmmeter for checking resistance of motor windings (AMB-1A and AMB-2). Built in voltmeter. Battery OK test. Mirror scale. Automatic discharge of equipment capacitance for safe removal of test leads.
Part # Description
AMB-1A Insulation Tester
AMB-2 Insulation resistance with 250VDC test voltage: 0-50M?
AMB-3 Insulation resistance with 500VDC test voltage: 0-1000M?
Insulation Testers (Megohmeters)
These insulation testers are intended primarily for periodic testing of industrial motors, transformers, electrical wiring and cable insulation for signs of deterioration. Low readings may indicate impending failure and permit replacement during routine maintenance rather than risking production downtime. Also useful for safety testing of TV sets and appliances to assure no hazardous leakage current. One year warranty.
506
Insulation Testers (Megohmeters)
(cont.)
Test insulation resistance. Measure AC voltage to 600V. Battery powered. Includes batteries, carrying case, test leads and instruction manual.
Part #
300
305
Description
1000V, 2000M ohm
500V, 1000M ohm
Selectable 250V, 500V or 1000V insulation testers. Low resistance test. Extra rugged integral carrying case. Live circuit indicator warns of safety hazard. Push to test.
Includes batteries, integral carrying case with strap, test lead and instruction manual.
Part #
307
308
Description
1000V, 200M ohm
1000V, 2000M ohm
3-Pole Megger® Earth Resistance Tester
Features include 2 & 3 point fall of potential methods and easy rugged weatherproof case. Includes terminal shorting bars. Optional lead set - 61-798. Ground resistance measurements. Auto ranging and auto power off. Single push button operation.
Rugged weatherproof construction.
Part # 61-788
MEGGER® Hand Held Insulation Tester
Battery powered - no need to hand crank. Test voltages
250/500/1000V. Digital display with analog arc. Auto power off. Protective rubber boot. CAT III-300V.
Carrying case included.
Part # 61-791
Test & Measurement - Audio/Video Testers
Portable HDTV Pattern Generator
Delivers accurate test patterns for the testing of the most common
HDTV displays. It is a must for TV repair engineer or technicians to test and calibrate digital televisions, Video Engineers to test and maintain studio equipment or Home Theater Installation Technicians to fine-tune the picture quality of digital televisions. A unique feature is the Overscan DVD Aspect Ratio pattern. This feature covers the most commonly use aspect ratios used for all movies recorded to DVD media.
Part # 1253
VDV MultiMedia Cable Tester
Easy-to-use tester for installers working with voice, data and video applications. Tests for opens, shorts, miswires, reversals and split pairs. Also indicates correct wiremap. Automatic shut off and low battery indicator. Easy to read LCD display with "PASS or FAIL" indicator after each test. Tone generator supports 4 different tones. Identifies voltage on cables. One remote wiremap and testing unit is stored inside tester. Uniquely designed remote accommodates
RJ-11, RJ-45 and F-style connectors. Can support up to 8 unique remotes that wiremap and test ports - more efficient for one person testing.
Part # 33-856
MiniTracker™ Tester
Identifies, or "maps", different cable end points and cable runs within a structure by identifying remote terminator color code.
Tone Mode can be used to send a tone signal on coaxial cable for tracing. Designed specifically for cable TV, security video, broadcast and building/home automation system applications. Single run/multi-run testing ability. Includes 4 F-type terminators.
Part # 62-202
SecuriTest™ Multi-Function Security Camera Tester
Multi-purpose, all-in-one tester performs the following functions: CCTV Field Monitor, Video Signal
Generator, PTZ Controller and protocol analyzer,
Digital Multimeter functions, UTP Cable tester. This unique, portable, lightweight unit saves installers time and money when installing and troubleshooting
CCTV cameras.
Part # 33-891
Test & Measurement - Universal Device Programmers
Universal Device Programmers
Fast and reliable. Extensive chip libraries are constantly being updated with the latest chips.
Successful programming with IC vendor approved software. Auto search device select function supports E(E)PROMs and Flash Memory. Full Screen
Menu operates by simple keystroke commands. Automatically configures for host parallel port. Supports JEDEC, Intel Hex, Motorola S Records, Binary
Tektronix Protocol and ASCII file formats with File Load/Save commands.
Optional adapters for surface mount devices. Interface is parallel port.
Accessories included are AC power card, parallel printer cable and instruction manual. Device functions are blank check, read program, verify, checksum, encryption and erase. Buffer features are view/edit, clear, fill, move, copy, checksum, file load and file save.
Part #
844A
Devices Supported
Device
Library
>10977
Programming
Socket .300-600 Pin
Spacing
40 pin DIP ZIF
848A
864
865
EPROM, EEPROM/Flash,
Serial EPROM,
Microcontroller, PLD
EPROM, EEPROM/Flash,
Serial EPROM
EPROM, EEPROM/Flash,
Serial EPROM,
Microcontroller, PLD and
BPROM
EPROM, EEPROM/Flash,
Serial EPROM,
Microcontroller, PLD and
BPROM
>6187
>14658
>16628
32 pin DIP ZIF
48 pin DIP ZIF
48 pin DIP ZIF
EPROM Eraser
UV-EPROM eraser featuring small dimensions, high erasing efficiency and simple operation. Up to five
EPROMs in 40-pin DIP packages can be erased simultaneously. A built-in timer is preset to an optimum erasing period. One year warranty. Timer setting is 15 min. 12VDC/500mA (AC/DC adapter included). UV bulb wattage is
4W. Accessories supplied are AC/DC adapter, pad and manual.
Part # 850
Deluxe EPROM Eraser
Heavy duty EPROM eraser that can simultaneously erase up to 40 twenty-four pin EPROMs. It is constructed of an all-metal case plus an advanced designed chip drawer that prevents UV radiation from being a hazard to the user. The chip drawer is lined with conductive foam to prevent electrostatic damage to the chips. Indicator light when erasing.
Power safety switch inside the drawer shuts off unit whenever the drawer is opened. Large capacity. One year warranty. Timer setting is 0 - 60 min. 100-120VAC 50/60Hz. UV bulb wattage is
10W. Accessories supplied are AC power cord and manual.
Part # 851
507
Test & Measurement - Counters & Function Generators
Bench-Top Function Generators
Three MHz function generator. High feature, low cost.
Easy push-button selection power, range, and waveform.
Square, triangle, sine wave, and TTL/CMOS outputs. Duty cycle and DC offset control VCF input. Includes test cables and spare fuses. Range is 0.3 Hz to 3MHz, ±5% of full-scale. Main output is 20Vp-p open circuit, 10Vp-p into 50 ohm load. DC offset control is -10V to +10V (open)/-5V to +5V (50_load). Duty cycle is 80% :
20% : 80% cont. variable. VCF input is (0V to ±10V) ±1V input for 100:1 ratio.
Input impedance is 10k ohm ±10%. Also available in 220 version as FG2CE.
Part # FG2C
Three MHz sweep/function generator. Best value combination generator. Square, triangle, sine wave, and
TTL/CMOS outputs. Amplitude or frequency modulation.
Linear and logarithmic sweep modes. Built-in, 6 digit display 150MHz frequency counter. Duty cycle, VCF, and DC offset control. Includes test cables and spare fuses. Range is 0.3 Hz to 3MHz,
±5% of full-scale. Main output is 0.3Hz-3.0MHz, 20Vp-p open circuit, 10Vp-p into a 50 ohm load. DC offset control is -10V to + 10V(open)/-5V to +5V (50 ohm load). Duty cycle is 1:1 to 10:1 continuously variable. VCF input is (0V to ±10V)
±1V input for 100:1 ratio. Input impedance is 10 k ohm, ±5%. Also available in
220V version as FG3CE.
Part # FG3C
True RMS, 4-1/2 digit and 20,000-count multimeter.
AC or ac+dc input coupling. High accuracy, basic V dc 0.03%. Voltage to 1200 V dx, 1000 V ac. Current from 10nA to 20 A. Resistance from 10 Mohm to 20
Mohm. Interlocking push-button control for easy selection. CAT III 1000 V rated. One year warranty.
Part # BDM40
Function Generators
2 MHz Function Generator
0.2 Hz to 2 MHz. Sine, square, triangle, pulse and ramp output. Variable duty cycle and DC offset. Accessories supplied are output cable with BNC to alligator clips and instruction manual.
Two year warranty.
Part # 4010A
4 MHz Function Generator
Generates sine, triangle and square waveforms. 0.5 Hz to 4 MHz. 20Vpp output into open circuit (10Vpp into 50 ohm). TTL output 25nS. Voltage Control
Generator (VCG) input. 100% DC offset. Five digit display. Variable amplitude output plus 20dB attenuator.
Part # 4003A
5 MHz with Digital Display
Sine, square, triangle, pulse and ramp output. Coarse and fine tuning. Four digit LED display. Variable duty cycle and DC offset. 0.5 Hz to 5 MHz. Includes output cable with BNC to alligator clips and instruction manual. Two year warranty.
Part # 4011A
Function Generators
(cont.)
10 MHz Sweep/Function Generator with Digital Display
Linear and log sweep. Five digit LED display. All the features of Model 4011A.
0.1 Hz to 10 MHz. Includes output cable with BNC to alligator clips and instruction manual. Two year warranty.
Part # 4017A
20 MHz Sweep/Function Generator with Frequency Counter
AM and FM modulation. Burst operation. External frequency counter to 30
MHz. Five digit LED display. All the features of Model 4017A. 0.2 Hz to 20
MHz. Includes output cable with BNC to alligator clips and instruction manual.
Two year warranty.
Part # 4040A
Counters
Counters provide versatility and reliability for a broad spectrum of laboratory and service applications. In addition to frequency measurements, most BK Precision counters also provide period and totalize measurement capabilities.
Eight digit display provides up to 0.1 Hz resolution.
Period mode provides accuracy at low frequencies.
Ratio mode combines two input frequencies and displays their ratio. Totalize mode and Time interval mode add versatility. Large bright LED display. Selectable attenuators and low-pass filter prevent miscounts due to input noise. Range is 175MHz. Time base accuracy is ±0.1 ppm.
Display hold. Sensitivity is 20 mVrms. Remote start-stop and self test.
Part # 1823
Selectable gate time 0.1 sec and 1.0 sec. Seven digit
LED display. Suitable for VHF communications up to
200 MHz. Highly accurate time base. Compact bench top AC powered counter. Range is 200MHz.
Frequency mode. Time base accuracy is ±0.1 ppm. Best resolution is 1 Hz.
Sensitivity is 20 mVrms.
Part # 1803D
Wide measuring range up to 2.4 GHz. Bright eight-digit LED display. Period mode for accurate low frequency measurements. Totalize mode permits counting of individual events.
Accurate TCXO time base. Functions are frequency, totalize period. Time base is ±0.1 ppm. Best resolution is 0.1 Hz.
Display hold, low pass filter, remote start-stop and self test.
Sensitivity is 10 mVrms.
Part # 1856C
Function and Arbitrary Waveform Generator
True 12 bit, accurate and drift free. Generates every data point independently of the repetition rate instead of a simple look-up table. Custom design waveforms on a PC or download from a number of sources, spreadsheet, oscilloscope or application program. Modes: Basic Sine/Square
Wave, Linear/Log Sweep (free run or triggered),
Internal/External AM, FM, PM, SSB, BPSK, FSK (Ext FSK to 3MHz), Burst
(Int/Ext trigger), DTMF Generation, DTMF Detection, Power Measurement,
Dualtone Generation, Arbitrary Waveform, Function Generator and Pulse
Generator. Two year warranty.
Part # 4070A
508
Test & Measurement - Oscilloscopes
Scopemeter® 120 Series
The compact ScopeMeter 120 Series is the rugged solution for industrial troubleshooting and installation applications. Dual input 40 or 20 MHz digital oscilloscope. Two 5,000 count true-rms digital multimeters. A dual input TrendPlot™ recorder. Connect-and-View™ trigger simplicity for hands-off operation. Shielded test leads for oscilloscope, resistance and continuity measurements. 10:1 Voltage Probe included with Fluke 124 for reduced circuit loading. Up to seven hours battery operation. 600 V CAT III safety certified. Optically isolated RS-232 interface with rugged compact case.
Part # Description
Fluke 123/003
Fluke 124/003
ScopeMeter 20Mhz
ScopeMeter 40Mhz
Scopemeter® 190B/190C Series
Provides high-performance oscilloscopes offering specifications usually found on top-end bench instruments. With up to 200 MHz bandwidth, 2.5 GS/s real-time sampling and a deep memory of
27,500 points per input.
Part #
Fluke 199C/003
Fluke 196C/003
Fluke 199B/003
Fluke 196B/003
Fluke 192B/003
Description
ScopeMeter 200 MHz color
ScopeMeter 100 MHz color
ScopeMeter 200 MHz B/W
ScopeMeter 100 MHz B/W
ScopeMeter 60 MHz B/W
Software, Cable, Carry Case For 190 Series
Packaging includes: FlukeView® Software for Windows®
English, French and German language, PM9080 optically isolated RS-232 adapter/cable and C190 hard carry case.
Part # SCC190
Hard Carrying Cases
Storage compartments for test leads, probes, instruction manual, power adapter and other small accessories.
Part #
C190
Description
Hard carrying case for 190 Series
C125 Compact Soft Case 120 Series
Zippered carrying case (black) for 120 Series. Pouch is designed to carry test leads and probes.
Convenient belt loop accommodates tool belt.
Part # C125
20 MHz Analog/Digital Storage Oscilloscope
Ten MS/s sampling rate each channel. Two-k memory per channel. One GHz equivalent time sampling
(at 0.1 µs/div). Pre-trigger capture. Includes instruction manual, two PR-33A x1/x10 probes or equivalent, AC power cord and spare fuse. Three year warranty.
Part # 2522B
30 MHz Analog Oscilloscopes
Dual or single trace operation 5mV/div sensitivity.
Auto/Norm triggered sweep operation with AC, TVH,
TVV and line coupling. Calibrated twenty-three step time base with x10 magnifier. Compact low-profile design. Includes instruction manual, two PR-33A x1/x10 probes or equivalent, AC power cord and spare fuse. Two year warranty.
Part # 2120B
Delayed sweep in twenty-three steps. Built-in component tester for capacitors, inductors, diodes, transistors, zener diodes. Twenty-three step time base to
0.1ms/div. Deluxe handle/tilt stand. Includes instruction manual, two PR-33A x1/x10 probes or equivalent, AC power cord and spare fuse. Three year warranty.
Part # 2125A
30MHz Analog Oscilloscope with Frequency Counter
A dual trace oscilloscope with a built in 50 MHz frequency counter that offers high performance at a low price. Has a bandwidth of 30 MHz while competitors have only a 20 MHz bandwidth. It has an AUTO/NORM triggered sweep operation with AC, TVH, TVV and line coupling. Compact low profile design.
Part # 2121
31.5 MHz Synthesized Arb. Waveform Generator with Software
Represents the finest single source for signal generation to date. Combining the latest DSP and DSS technologies. Stable, accurate and drift free. It generates every data point independently of the repetition rate instead of a simple look up table.
Part # 4071
40 MHz Dual Channel Analog Oscilloscope
Five mV/div sensitivity. Nineteen calibrated sweeps.
Video sync separators. X10 sweep magnification.
Includes instruction manual, two PR-33A x1/x10 probes or equivalent, AC power cord and spare fuse. Three year warranty.
Part # 1541D
60 MHz Analog Oscilloscope
Five mV/division sensitivity. Twenty-three calibrated ranges - delayed and main time base. Component tester.
Z axis input. Single sweep. Includes instruction manual, two PR-33A x1/x10 probes or equivalent, AC power cord and spare fuse. Three year warranty.
Part # 2160A
100 MHz Analog Oscilloscope
Dual time base oscilloscope (two channel). Five mV/division sensitivity. Sweeps to 5ns/division. Twentythree calibrated ranges, main time base. Signal delay line. Fifteen kV accelerating voltage. Channel 2 output.
Includes instruction manual, two PR-37A x1/x10/Ref probes or equivalent, AC power cord and spare fuse. Three year warranty.
Part # 2190B
150 MHz Analog/Digital Storage Oscilloscope
Dual channel 150 MHz, 200 MS/s. Autoset. Auto cursor. Save and recall. 2K x 8bit memory per channel. RS232 (software included). Component test.
Readout cursor (analog/digital). Selectable acquisition modes. Includes operating manual, four disks, line cord, two probes 10:1. Two year warranty.
Part # 5105A
509
Test & Measurement - Power Supplies
Single Output DC Power Supplies
Connect two supplies in parallel to double the current output. Connect two supplies in series to double the voltage output.
Voltage regulation line (120VAC±10%) is 0.01% + 3mV. Voltage regulation load (no load - full load) is 0.01% + 3mV. Recovery time is 100µs.
Ripple and noise is 1mV rms. Temperature coefficient is 300ppm/°C. Adjustable current range is 5% to 100%. Current regulation line
(120VAC±10%) is 0.2% + 3mA. Current regulation load is 0.2% + 3mA. Current ripple is 3mArms.
Part #
1710A
1711A
1715A
1730A
1735A
Output
Voltage
0-30V
0-60V
0-60V
0-30V
0-30V
Output
Current
0-1A
0-2A
0-2A
0-3A
0-3A
Metering Type
Analog
Analog
3-digit LED
Analog
3-digit LED
Volt Range
0-32V
0-64V
0-99.9V
(green)
0-32V
0-99.9V
(green)
Volt Accuracy
±2.5%
±2.5%
±(0.5%rdg + 2 digits)
±2.5%
±(0.5%rdg + 2 digits)
Ammeter High
Range
0-1.04A
0-2.2A
0-9.99A (red)
0-3.2A
0-9.99A (red)
Ammeter Low
Range
0-0.26A
0-0.55A
n/a
0-0.53A
n/a
Ammeter
Accuracy
±2.5%
±2.5%
±(0.5rdg + 2 digits)
±2.5%
±(0.5rdg + 2 digits)
Voltage regulation line (120VAC ±10%) is 0.2% + 2mV. Voltage regulation load (no load - full load) is 0.04% + 2mV. Recovery time is 100µs. Ripple and noise is
1mV rms. Temperature coefficient is 300 ppm/°C. Adjustable current limit is 5% to 100%. Current regulation line (120VAC±10%) is 0.4% + 5mA. Current regulation load is 0.4% + 5mA. Current ripple is 3mA rms. Dimensions (HxWxD)- 5.7 x 10.5 x 15" (145 x 267 x 381 mm).
Part #
1740A
1743A
1746A
Output
Voltage
0-60V
0-35V
0-16V
Output
Current
0-4A
0-6A
0-10A
Metering Type Volt Range
Analog
3-Digit LED
Analog
0-64V
0-99.9V
(green)
0-16V
Volt Accuracy
±2.5%
±(0.5%RDG + 2 digits)
±2.5%
Ammeter High
Range
0-4.4A
0-9.99A (red)
0-11A
Ammeter Low
Range
0-1.1A
n/a
0-2.2A
Ammeter Accuracy
±2.5%
±(0.5%RDG + 2 digits)
±2.5%
Compact Single Output DC Power Supplies
Connect two supplies in parallel to double the current output. Operate continuously at full load without overheating. Coarse and fine voltage controls. Constant voltage or constant current operation. Voltage regulation line (120VAC + 10%, -6%) - =0.02% + 3mV. Voltage regulation load (no load - full load) - =0.02% + 3mV. Recovery time - =500ms. Ripple and noise - =0.5mV rms. Temperature coefficient -
=300ppm/°C. Adjustable current range - 0-100%. Current regulation line (120VAC + 10%, -6%) - =0.02% + 3mA. Current regulation load
- =0.02% + 3mA. Current ripple - =3mA. Overload protection is current, limiting, reverse polarity, overvoltage, short circuit. Power requirements are 120VAC±10%, 60 Hz (120/220/230/240VAC±10%, 50/60Hz version available). One year warranty.
Part #
1620A
1621A
1622A
1623A
1626A
1627A
Output
Voltage
0-18V
0-18V
0-60V
0-60V
0-30V
0-30V
Output
Current
0-5A
0-5A
0-1.5A
0-1.5A
0-3A
0-3A
Metering Type
Analog
3-digit LED
Analog
3-digit LED
Analog
3-digit LED
Volt Range
0-18V
0-18V
0-60V
0-60V
0-30V
0-30V
Volt Accuracy
Ammeter
Range
±7% FS 0-5A
±0.2% + 2 digits 0-9.99A
±7% FS 0-3A
±0.2% + 2 digits 0-9.99A
±7% FS 0-3A
±0.2% + 2 digits 0-9.99A
Ammeter
Accuracy
±7% FS
±0.2% + 2 digits
±7% FS
±0.2% + 2 digits
±7% FS
±0.2% + 2 digits
Power Consumption
210W
220W
210W
220W
210W
220W
Model 1653A Variable Isolated AC Power Supply
Variable isolated 0-150VAC. Continuous output at 2A. Displays voltage or current readings. Isolation transformer to eliminate shock hazard while servicing "hot chassis" equipment. A compact, rugged unit with one year warranty. Output isolation - leakage less than 0.1mA (25°C, 50% RH).
Voltage/current sensing is sine wave average, calibrated in RMS.
Part #
1653A
Peak Current
(inrush)
N/A
Meter Scale
0-140VAC, 0-2
VAC
Leakage
N/A
Metering
3 1/2" overrange protected
Meter
Accuracy
±5% of full scale
Soldering Iron
Temp. Control
N/A
Power
Requirements
120VAC ±10%, 60
Hz 300VA
Dimensions
(HxWxD)
5.5 x 6.5 x 10.5" (140 x 165 x 267mm)
Model 1655A Variable Isolated AC Power Supply
Variable isolated output is 0-150VAC. Maximum current is 3A continuous and 4A intermittent output. Built-in soldering iron temperature control.
Expanded leakage scale. Circuit breaker overload protection. Displays V, A, VA and leakage. One year warranty included. Output isolation leakage less than 0.1mA (25°, 50% RH). Voltage/current sensing is sine wave average, calibrated in RMS.
Part #
1655A
Peak
Current
(inrush)
30A max.
(inrush limited to one cycle at 30A)
Meter Scale
0-240VAC, 0-
480VAC (voltage set at 120)
Leakage
0-5000 µA (expanded in 100-500 µA portion, compressed to 5mA full scale)
Metering
4 1/2 multicolor scales, overrange protected
Meter Accuracy
±5% of full scale
(volts and current) ±5% at
500µA (leakage)
Soldering
Iron Temp.
Control
70-99% of power line
(100W max.)
Power
Requirements
120VC ±10%, 60
Hz, 600VA at maximum output
Dimensions
(HxWxD)
10.5 x 5.7 x 12"
(267 x 145 x
305mm)
510
Test & Measurement - Power Supplies
GPIB Programmable Power Supplies
Excellent programming resolution and accuracy. Integral system software makes in-case calibration quick and accurate. Large character LCD display assures fast, "easy-to-read" measurements. Line regulation (120V±10%) is 0.001%. Load regulation is 0.001% + 1mV. Ripple and noise is 1mV rms. Operating voltage is 110-120VAC, 220-230VAC. Dimensions (WxHxD) are 8.4 x 5.2 x 15.7 (213 x 132 x 398mm). Display is 4 digit alphanumeric LCD. Three year warranty.
Part #
1770
DC Output Max
Volt
0-17.5V; 0-35V
DC Output Max
Current
0-6A; 0-3A
Resol. Volt
10mV
Resol. Current
2mA
Resol. OVP
200mV
Accuracy Volt
0.05% + 2LSB
Accuracy Current Accuracy OVP
0.15% + 5LSB 2.4% + 0.3V
Variable Voltage DC Output
Model 1688 has 20A guaranteed @ 13.8V and Model
1686 has 12A guaranteed @ 13.8V. Variable voltage is 3 to 14 volts DC output. Current limiting overload, over voltage, short circuit and reverse polarity protection.
Thermostatically controlled cooling fan. Thermal protection. Connect two in parallel for more current. Connect two in series for higher voltage. Output current is proportional to output voltage. F.S.
Power requirements are 120/220 VAC±10%, 50/60 Hz. Instruction manual and one year warranty included.
Part #
1686A
1688A
DCV Output-Max
DCA
3V-2.5A, 5V-4.5A,
9V-7.5A, 12V-
10A, 13.8V-12A,
14V-12A
3V-4.5A, 5V-7.5A,
9V-13A, 12V-20A,
13.8V-20A, 14V-
20A
Voltmeter
Range
0-20V
0-30V
Ammeter
Range
0-20A
0-30A
Power
Consumption
400W
580W
High Current DC Power Supply
Regulated DC power supplies with 640 watt output.
Linear high current DC power supplies suitable for bench operation or standard 19" rack operation. Low noise output. Automatically cross over from constant voltage to constant current mode and viceversa if the output exceeds preset limits. Front panel LED meters for monitoring voltage and current. Output terminal may be grounded or floated up to a maximum of ± 300 VDC above ground. Designed to meet CE specifications.
Constant voltage/constant current operation. Remote programming facility.
Facility for presetting the output voltage and maximum load current limits.
Separate DC output ON/OFF switch. Two year warranty. User manual included.
Part #
1790
1791
Output (DC)
0-32V
0-64V
Output Current (DC)
0-20A
0-10A
Triple Output DC Power Supply
One variable 0-30VDC, 3A section. Operating temperature is 0 to 40°C =75% R.H. Dimensions (HxWxD) are
5 x 8.5 x 9.2". Ideal for general electronic servicing, school electronics labs, and powering up hobbyists projects. One year warranty.
Part # 1670A
Two 0-30 VDC, 2A sections capable of independent, series or parallel operation. One 4-6.5VDC, 5A section. Switchable series/parallel operation - 30V sections. Adjustable current limit controls-30V sections.
Two 3 digit LED displays. Operating temperature is -
15° to 70°C =85% R.H. Dimensions (HxWxD) are 5.7
x 10.5 x 15" (145 x 267 x 381mm). Weighs 21 lbs. (9.5kg). Two year warranty.
Part # 1760A
Programmable DC Power Supply
Nine user-programmable preset outputs. Ten step userprogrammable output routine. In-case calibration. Serial interface cable and software included. Line regulation
(120V±10%) is 0.02% + 5mV. Load regulation is 0.02% +
5mV. Ripple and noise (RMS) is 1mV. Operating voltage is 110/220 VAC, 60 Hz.
Display is 3 digit LCD voltmeter and ampmeter. Two year warranty.
Part #
1785A
1786A
1787A
DC Output Voltage
0-18V
0-30V
0-60V
Current
5A
3A
1.5A
Regulated 28A DC Power Supply
Models offer multiple DC output terminals: two pairs of 3A, snap-in DC connectors are easily accessible on the front panel, and a pair of 28A screw-on DC output terminals are located on the rear panel. IVDC to 15VDC variable output.
28A output at - 13.5VDC. Overload protection. High RFI stability. Multiple DC output terminals. One year warranty. DC Output Max Ratings: Voltage is 1-
15V. The current is 28A (@13.8V). Line regulation is 5mV (±2% load). Load regulation is 50mV (0-100% load). Ripple and noise (RMS) is 5mV. Operating voltage is 120 VAC, 60 Hz. Dimensions (WxHxD) are 9.84 x 5.5 x 8.86" (250 x 140 x 225mm). Weighs 19.9 lbs (9kg). User manual and one year warranty is included.
Part #
1689
1690A
Description
Analog
Digital
Fixed Voltage Power Supplies
Current foldback overload, short circuit and reverse polarity protection. Thermostatically controlled cooling fan. Output voltage is 13.8 VDC±0.5V. Output current is
15 ADC peak, 12 ADC continuous. Line regulation (110-
132 VAD) is -0.8%. Ripple and noise is 10mV rms. Power requirements are 110-132 VAC, 60 Hz. Power consumption is 400W. Operating temperature range is 0ºC to
40ºC, 75% R.H. Storage temperature range is -15ºC to 70ºC, 85% R.H. One year warranty. Instruction manual included.
Part # 1682A
Current foldback overload, short circuit and reverse polarity protection. Convenient cigar lighter output. Output voltage is
13.8 VDC±0.5V. Output current is 6 ADC peak, 4 ADC continuous. Line regulation (110-132 VAD) is 130mV. Ripple and noise is 10mV rms. Power requirements are 110-132
VAC, 60 Hz. Power consumption is 185W. Operating temperature range is 0ºC to 40ºC, 75% R.H. Storage temperature range is -15ºC to 70ºC, 85% R.H. One year warranty. Instruction manual included.
Part # 1680A
511
Test & Measurement - Power Supplies
Switch Mode Power Supply
Lightweight and compact. High efficiency. Current fold-back circuitry with illuminated indicator prevents overloading the power supply. Over temperature protection circuitry. Over voltage protection prevents abnormal high output voltage. High RFI stability.
Variable output 3V to 15V at 40A. Ripple and noise is - 10mVrms. Line regulation (120V±10%) - 80mV (±10% variation). Load regulation - 230mV (0-100% load). Power requirements - 120 VAC; 60 Hz. Metering - dual color digital LED.
One year warranty. Includes instruction manual.
Part # 1692A
Dual Output Isolation Transformer
Direct-convenience duplex outlet provides line voltage for auxiliary equipment up to 500 VA. Isolated two 3-position slide switches provide 9 combinations of voltage selection from 90 to
140 V, up to 350 VA continuous or 500 VA intermittent. Self-contained power switch with pilot lamp. UL listed. Input requirements are 105 - 130 VAC, 60 Hz. Direct and isolated connections - duplex outlet (3 conductor). Regulation - no load (350
VA), voltage change 4%. Dimensions (HxWxD) are 5.1 x 5.5 x
8" (130 x 140 x 200 mm). Weighs 11 lbs (5 kg). One year warranty.
Part # TR-110
Compact Triple Output DC Power Supply
Independent or tracking operation. Adjustable current limiting. Designed to operate continuously at rated output. Short circuit protection, overvoltage protection, and reverse polarity protection. Connect outputs in series for higher voltage output or in parallel for higher current output (switch selectable). One year warranty.
Part #
1651A
Metering
Display
2 Analog
Volt
Range
0 to 25
V
Volt
Accuracy
2.5% of full scale
Ammeter
Range
0 to 600 mA
Ammeter
Accuracy
2.5% of full scale
GPIB Programmable Power Supplies
Excellent programming resolution and accuracy. Integral system software makes in-case calibration quick and accurate. Large character LCD display assures fast,
"easy-to-read" measurements. Line regulation
(120V±10%) is 0.001%. Load regulation is 0.001% +
1mV. Ripple and noise is 1mV rms. Operating voltage is 110-120VAC, 220-
230VAC. Dimensions (WxHxD) are 8.4 x 5.2 x 15.7 (213 x 132 x 398mm).
Display is 4 digit alphanumeric LCD. Three year warranty.
Part #
1775
1780
DC Output
Max Volt
0-35V
0-18V
DC Output
Max Current
0-2A
0-4A
Resol.
Volt
10mV
5mV
Resol.
Current
0.6mA
1.5mA
Resol. OVP
200mV
100mV
Test & Measurement - Specialty & Misc.
Fluke 430 Series Three-Phase Power Quality Analyzers
Locate, predict, prevent and troubleshoot problems in three and single phase power distribution systems. Highest safety rating in the industry - 600V Cat IV / 1000V Cat III.
Automatic transient mode captures 200kHz waveform data on all phases simultaneously - up to 6kV. Every measurement is automatically recorded, without any setup. Up to seven power quality parameters on one screen according to EN50160. Rugged, handheld troubleshooter with Fluke 3 year warranty.
Seven hours operating time per charge on NiMH battery pack.
Part #
Fluke 434/003
Fluke 435/003 i430-Flex-4Pk
C435
I5sPQ3
GPS430
Fluke 434/LOG
I400s
Description
Power Quality Analyzer 3 Phase
Logging Power Quality Analyzer 3 Phase
4 pack of 3000A flexible current probes (included with
Fluke 435)
Water tight hard case with rollers (included with Fluke
435)
3 pack of 5A precision current clamps
GPS time synchronization module for Fluke 430 Series
Upgrade kit for Fluke 434 includes Power Log software and enables logger and mains signaling function (accuracy and memory not upgradeable)
AC Current Clamp
Fluke 1740 Series Power Quality Loggers
Capable of logging over 500 parameters for up to 85 days. Includes PQ Log software to quickly assess the quality of power at the service entrance, substation or at the load according to the latest EN50160 standard. Measure all 3 phases and neutral with included 4 flexible current probes. No power supply or batteries required. Accurately validate system performance with IEC 61000-4-30 class A voltage accuracy and EN50160 overview. Designed for rugged field use with IP65 case. Two year warranty.
Part #
Fluke 1743
Fluke 1744
Fluke 1745
Description
Logs voltage, current, dips, swells, interruptions, voltage harmonics, power, energy - Dust/water resistance IP65 - UPS 1s
Logs voltage, current, dips, swells, interruptions, voltage harmonics, power, energy, current harmonics, interharmonics, flicker, frequency - Dust/water resistance IP65 - UPS 1s
Logs voltage, current, dips, swells, interruptions, voltage harmonics, power, energy, current harmonics, interharmonics, flicker, frequency - Dust/water resistance IP50 - UPS >5 hrs
Fluke 43B Power Quality Analyzer
Performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. The new 43B has 20 storage locations and can store data as well as screens.
Part # Fluke 43B
C550 Premium Tool Bag
Steel reinforced frame. Rugged ballistic cloth with heavy duty hardware. Large zippered storage compartment with over 20 pockets. Weather resistance and carries all tools to the job.
Part # C550
512
Test & Measurement - Specialty & Misc.
Capacitance and Resistance Testers
The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes. Plug-in test slots and test leads. Oversized, read-at-a-glance display. Data hold and max hold. Auto-off. Resistance is 0.01 ohm-20M ohm, ±
0.5%. Capacitance 0.1pF-2000µF, ±1.0%. Inductance is 0.1µH-
200H, ±5.0%. Transistors are Hfe, Iceo (NPN, PNP). Diodes are Std
(3V) and microwave oven (8V). Continuity test. Holster.
Part # LCR55A
Sort, match, QC inspect, and verify components, check circuits with this full range capacitance and resistance meter. Dual zero adjustment pots to null strays and test leads. Special "Low Ohms" range.
Oversized, read-at-a-glance display. Premium test leads with alligator clips. Resistance is 0.01 ohm-20M ohm, ± 0.5%. Capacitance is
0.1pF-20mF, ± 0.5%. Diode and continuity test.
Part # CR50A
Advanced Tracer
Trace energized lines up to 300 VAC or VDC. Trace unenergized and open conductors. Identifies breakers and fuses without powering down. Locates shorts.
Identifies wires in a bundle. Identifies control, alarm and telephone system wiring. Traces coaxial cable shield.
Receiver range 1 to 3 feet from a cable being traced.
Part # AT-1000
Ultrasonic Leak Detector
ULD-300
Locates arcing in an electrical system. Useful in finding the ends of buried PVC pipes. Detects any pressurized gas leak regardless of type CFC's, HFC's, Nitrogen, etc. (unaffected by contaminants).
Part # ULD-300
TMULD-300
ULD-300 with UT-300 Transmitter. Has same features as ULD-300. Transmitter
"pressurizes" area with ultrasonic sound enabling the ULD-300 to pinpoint leaks
(used in areas where gas is not sufficiently pressurized). Applications include air tightness of cars or houses.
Part # TMULD-300
Digital Recorder/Data Logger
Measures and records broad spectrum of power quality parameters: AC current up to 1000A (and up to 300A with optional CTs), AC voltage to 600V, active, reactive and apparent power, energy, peak demand and power factor. Comes as a complete kit, CT's and PC software are included with product. Works with single and three phase systems (Y and delta). Capable of recording all parameters
(single or three phase) simultaneously. All readings are True RMS (TRMS).
Part # DM-II PRO
Current Tracers
Heavy duty, recommended for tough industrial applications.
Traces live wires buried underground or hidden behind walls up to 13 feet deep. Performs tests without having to interrupt power. Locates breakers, neutral and ground lines. Locates and traces wires in walls, floors, conduit, computer cables, etc. Pinpoints shorts and ground faults. Does not interfere with sensitive electronic equipment.
Part # Description
CT-100 Wire Tracer - Traces wire up to 4 feet deep
CT-326B Current Tracer - Traces wire up to 13 feet deep
3-Phase Motor Rotation Tester
Identifies three-phase sequence. Indicates motor rotation.
Checks for open phases. For use up to 600V. Meets IEC-
1010 (EN61010) safety requirements. Five year warranty.
Includes carrying case.
Part # 61-521
SureTest® Open/Closed Circuit Tracers
Locate and trace where energized or de-energized cables are installed behind walls, under the floor, from the outlet to the breaker panel. No more guessing where circuits are located behind walls. Pinpoints opens and shorts in wires. Identifies breakers and fuses. Bright, easy to read OLED rotating display. Four search mode intensities. 2 year warranty. 2 kits to choose from.
Part #
61-956
61-958
Description
OLED Receiver, transmitter, test lead set, case
OLED Receiver, transmitter, test lead set, case, plus inductive clamp
Voltage Performance Monitor
Identify problem circuits before expensive and sensitive equipment is installed. Monitors energized circuits for voltage events such as sags, swells, impulses, and harmonic distortion. Real time monitoring and data storage of up to 512 events. Records the time, date, and length of the each specific voltage event. User definable parameters. No software or external device needed to view results.
Bright OLED screen. Works on 15-265V circuits.
Part # 61-830
CableTool™ Multifunction Cable Meter
Identify and find the distance to an open or short in seconds.
Measure cable length in a box, on a spool or in a wall from just one end. Transmit tone signals for tracing hidden cables runs.
Measure voltage to identify live circuits. Extensive built-in library or cable types. Compatible with all common cables. Displays length in feet or meters. Includes: red test lead with alligator clip, black test lead with alligator clip, carrying case and four AA alkaline batteries.
Part # CT-50
CX-920A Digital Capacitance Meter
A "must" for troubleshooting and circuit design. Measures to 20mF
(20,000µF). Portable, battery operated. 0.1pF to 20mF. Nine ranges. 0.5% basic accuracy. 3½ digit LCD, 0.55" height. Zero adjustment. Input protected. Low battery indicator. Overrange indicator. Rotary range switch. Rugged construction. Tilt stand. One year limited warranty. Battery, test leads (ML-920A), spare fuse and operating instructions included.
Part # CX-920A
513
Test & Measurement - Probes & Probe Accessories
TP220 SureGrip™ Industrial Test Probes
Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
Part # TP220
Contact Probes
80TK Thermocouple Module
Converts multimeters with a mV range into digital thermometers. Converts K-type thermocouple signals into mV output. Connects to DMM via standard banana plugs. Switch selectable °C to °F. Range is -
50°C to 1000°C (-58 to 1832°F). Includes 80PK-1 probe.
Part # 80TK
80PK-1 Bead Probes
This basic, inexpensive thermocouple offers good accuracy and fast response. (Not suitable for liquid immersion.) Measurement range is -40 to 260°C (-40 to 500°F). One meter (39") lead wire. Compatible with K-type thermometers.
Part # 80PK-1
Active Differential Probe
Allows user to safely make floating high voltage measurements while using general purpose oscilloscopes. Maximum differential voltage up to 1000V.
Differential amplifier converts and scales floating input signal to a low voltage signal referenced to earth ground. The probe can be used on circuits associated with electronic high-power converters, motor speed controllers, switching power supplies, and other high voltage circuits requiring isolation. Switchable attenuation settings. High impedance to ground for both positive and negative sides of the balanced input. Input uses shrouded banana test probe tip. Probe tip accepts large alligator clips and pingrabber test clips (included). The output to the oscilloscope is a BNC cable with a safety insulated BNC male connector.
Part # 6731
Temperature Probes - K Type
Extended Range General Purpose Temperature Probe
General purpose probe for gas, air, gels and liquid measurements. Measurement range is -320°F to
1994°F (-196°C to 1090°C). Temperature tolerance is
±2.2°C or 0.75%. Probe length is 8". O.D. is 0.125". Cable length is 48".
Part # 6373
General Purpose Temperature Probe with Round Tip
General purpose probe for gas, air, gel and liquid measurements. Measurement range is -40°F to
500°F (-40°C to 260°C). Temperature tolerance is
±2.2°C or 0.75%. Probe length is 6". O.D. is 0.125". Cable length is 48".
Part # 6367
Temperature Probes - K Type
(cont.)
Surface Temperature Probe
Ideal for measuring surface temperatures in a lab or more rugged environment. Measurement range is -32°F to
500°F (0°C to 260°C). Temperature tolerance is ±2.2°C or
0.75%. Probe length is 4". O.D. is 0.125". Cable length is 48".
Part # 6376
Temperature Probe with Thermocouple Bead Tip
General purpose probe for air and surface measurements.
Temperature tolerance is ±2.2°C or 0.75%. Cable length is
39" (1 meter).
Part # 6378
Thermocouple Extension Wire Kit
Kit includes one pair of mini-connectors (male and female) and thermocouple wire (unassembled). Temperature range is -40ºF to 500ºF (-40ºC to 260ºC.
Part # 6540K
Specialty Probe Sets
Precision Electronic Test Probe Sets
Replaceable pogo-pin tips. Comfort-grip textured surface.
Fits all meters including Fluke, HP (Agilent), Keithley,
Wavetek, (Meterman) and others. Silicone insulated leads resist abrasion and heat. Replacement tips types are sharp-point gold pogo-pin, tri-point gold pogo-pin, quad-point gold pogo-pin, sharp stainless steel rigid and 3" long extended stainless steel. Ratings are CAT III 1000V.
Part #
6341
6354
Description
Probe set with complete set of 5 tips
Replacement probe tip. Set of 5 types.
Retractable Tip Test Probes
Sharp, thin tips for hard-to-reach places. Silicone insulated 4 ft. leads fits most meters from Fluke,
Wavetek (Meterman), HP, Amprobe, Greenlee and others. Fully insulated tip extends to 3". Durable
.040" stainless steel tips reach into inaccessible areas. Set of 2 probes, one black and one red. Right-angle DMM. CAT II 600V.
Part # 5953A
Replaceable Tip Probes
Easily replaced without tools making this versatile probe the perfect tool for nearly every test. Comfort-grip probe handle. Probe tip types are gold-plated sharp-point pogo, gold-plated Microtip pogo, gold-plated triple-point pogo, stainless-steel sharp-point, and standard tip, 060 nickel/brass. Plug types are right angle DMM plug*, straight DMM plug*, stacking banana plug, straight banana plug, retractable sleeve banana plug, and right angle banana plug.
*Shrouded DMM plugs fit most DMMs from Fluke, Wavetek (Meterman), HP
(Agilent), Amprobe, Greenlee and others.
Part #
5950A
5951A
6469
6470
6472
6477
Probe Tip Plug Type Ratings
Stainless-steel sharp-point
Nickel plated brass
Straight banana 30VAC
60VDC
Right-angle banana 30VAC
60VDC
Gold-plated microtip pogo
Gold-plated microtip pogo
Gold-plated microtip pogo
Stainless-steel sharp-point
Right-angle DMM
Straight DMM
Stacking banana
Right-angle DMM
CAT III 1000V
CAT III 1000V
30VAC
60VDC
CAT III 1000V
514
Test & Measurement - Probes & Probe Accessories
Modular Passive Voltage Oscilloscope Probes
A new, compact, ergonomically designed probe handle. Ideal for use with a wide variety of oscilloscopes. They feature a spring-loaded, pogo-pin replaceable tip. The fine tip probes are perfectly suited for probing high-density chip leads with less than 0.060" spacing.
Modular in design, the probe handle is capable of receiving a variety of spring-loaded and fixed tips, providing greater testing versatility.
Probe sets feature probe handle, insulated adjusting tool, spring hook, BNC adapter, 23cm ground lead, 25mm ground adapter, IC tip adapter, tip cover, rigid tip and spring-loaded tip (1 each) and complete set of instructions and specifications. Bandwidth includes total system bandwidth when attached to scope. *Measurements based on a 15pF oscilloscope. **Has readout actuator.
Part #
6491
6492
6493
6494
6495
6496
6497
6498
6499
6500
6501
Attenuation
X1
X10
X10
X10
X10
X10
X10**
X100
X1/X10
X1/X10
X10
Bandwidth (-3dB)
MHz
25
350
60
60
100
350
350
350
20/60
20/100
350
Risetime ns
14
1
5.9
5.9
3.5
1.0
1.0
1.2
17.5/5.9
15/3.5
1
Input Resistance
Mohm
10
10
10
10
50
1
10
10
1/10
1/10
10
Capacitance* pF
38
12
10
10
10
12
12
6
40/10
42/10
12
Compensation
Range pF
-
8~45
10~60
10~60
10~60
5-40
5-40
10~50
/10~60
/10~60
8~45
Max Input
Voltage
100
300
300
300
300
300
300
1500
300
300
300
Cable
Length m
1.2
1.2
1.2
1.2
1.2
1.2
1.2
2
1.2
1.2
1.2
Replacement Passive Oscilloscope Probes
These general purpose monolithic passive voltage probes feature high performance for greater test flexibility. Complete accessory kit included. *Measurements based on 1M ohm, 20pF oscilloscope. Bandwidth includes total system bandwidth when attached to scope.
Part #
4550B
5795A
5800A
5803A
Attenuation
X1/X10
X10
X1
X10
Bandwidth (-3dB)
MHz
15/100
100
30
200
System Risetime ns
23.33/3.5
3.5
11.66
1.75
System Input Resistance*
Mohm
1/10
10
1
10
Capacitance* pF
64/10.5
9.5
57
10
Compensation Range pF
NA/10~60
10~60
NA
10-60
Logic Probes
Pen-size logic probes. Troubleshoot and analyze digital logic circuits.
Part #
LP10B
LP25B
Description
A good value for most common circuits detects pulses 30ns up to
17MHz; TTL, CMOS levels. Dual LEDs indicate Hi/Lo state.
A better unit tests more detects pulses 30ns up to 25MHz, TTL,
CMOS, DTL, RTL, NMOS, MOS logic dual LEDs and tone indicate
Hi/Lo state.
Temperature Probes and Tips
These temperature probes are Type K thermocouples. They terminate in miniature, type K male connectors. They are directly compatible with Wavetek
Meterman Models 23XT, 28XT, HD110T, 235, TM45,
TC253A and all other meters and thermometers with type K female connectors.
Part # Description
TP254A Higher temperature immersion probe. Built on handle.
1100°C/2012°F.
TP255A Low cost, general purpose bead probe. 200°C/392°F.
MH101K-A Master probe handle for tips TP110K, TP120K and TP130K.
TP110K-A
TP120K-A
Immersion probe tip. 650ºC/1200ºF. Use with MH101K handle.
Surface probe tip. Specially designed to get true surface temperatures. 650°C/1200°F. Use with MH101K handle.
TP130K-A Air/gas probe tip. Specially designed with radiation sheath.
650ºC/1200°F. Use with MH101K handle.
High Voltage Probe
Extended voltage measuring to 40kV. Use with standard multimeters with 10M ohm input impedance. DC voltage is 1kV-40kV,
±2%. AC voltage is 1kV-40kV (50/60 Hz ± 5%).
Part # HV231-10A
Non-Contact VoltProbes®
Detect AC Voltage (100-600V). Use non-contact method of voltage testing. Totally insulated, no exposed metal or conductive parts. Check for AC voltages without necessity of disconnecting the electrical system. Test for
AC Voltage cables, circuit breakers, wall sockets, junction boxes, fuses.
Find and pinpoint breaks in wires. CAT III 600V.
Part #
VP-600
VP-600B
VP-600SB
Features
Lights
Lights and Beeps. AC Voltage Detection is 100-600V.
Lights, Beeps and Shakes.
515
Test & Measurement - Probes & Probe Accessories
Three Piece Oscilloscope Probe Kit
A complete range of probe attenuation. It contains three probes-1x, x100, and x1/x10 switchable.
Includes a full accessory offering with spring hook, replacement tip, ground lead and BNC adapter.
IEC61010-2-031 compliant.
Part # PR-50
Demodulator Probe
All purpose demodulator probe, usable with most oscilloscopes. Features lightweight design and 48"
(1.2m) coaxial cable.
Part # PR-32A
RF DMM Probe
All purpose RF demodulator probe, usable with most digital multimeters. Allows a digital multimeter to measure sine wave AC signals: 1 Veff=1VDC.
Lightweight design.
Part # PR-650A
40 kV High Voltage DMM Probe
If the voltages you need to measure are above the specifications of general purpose probes, B+K Precision has a higher voltage probe for you. Voltage AC is 20kV and voltage DC is 40kV.
Part # PR-28A
UL Listed Probes With PVC Wire
IEC61010 600V CATIII rating. Highly flexible PVC lead wire, 40" (1.0m). Black and red alligator clips.
Part # TL-100A
Maxi-Pro DMM Kit
Includes soft, flexible silicone lead wire for easy movement and tri-fold velcro pouch for convenient storage. IEC61010-2-031 compliant. Silicone lead wire length 60" (1.5m).
Part # TL-50
SMD Probe Kit
Extended, slim-line probe body for easy reach. Use with small SMD components or general purpose test points. Includes soft, flexible silicone lead wires for easy movement and clear PVC. Pouch for convenient storage. IEC61010-2-031 compliant. Silicone lead wire length 60" (1.5m).
Part # TL-10
Probe Accessory Kit
Threaded accessories to fit TL-2A probes - black and red pairs (except for alligator clip). Alligator clip, red only. Spring hook clips. Four inch sharp extension tips to reach tight test points. No. 10 spade lugs.
Part # TL-3
516
Active FET Probe
Powered by a 12VDC adapter (included), the probe measures frequencies up to 750MHz with an input impedance of 2pF and 1M ohm. Accessory kit includes: (4) 0.031 gold measuring tips, (2) ultra-miniature test clips, (2) miniature test clips, (2) 5cm miniature test leads and (2) 10cm miniature test leads.
Part #
PR-70
TIP-70
Description
Probe
Probe accessory kit
Temperature Probes
Enhance the utility of the humidity/temperature and temperature meters with a selection of K-type temperature probes. Select the probe that best fits the application.
Part #
TP-1A
TP-29
TP-2A
TP-3
TPK-03
TPK-04
TPK-05
TP-5300
Probe Type
Immersion probe, standard
Bead probe, standard
Air and gas probe
Bead probe, hi-temp
Surface probe, standard
Piercing probe
Surface probe, right angle
Platinum RTD
Temperature Range
-58° ~ 1,650°F (-50° ~ 900°C)
-58° ~ 392°F (-50° ~ 200°C)
-40° ~ 570°F (-40° ~ 300°C)
140° ~ 900°F (-40° ~ 480°C)
-58° ~ 752°F (-50° ~ 400°C)
-58° ~ 1,122°F (-50° ~ 600°C)
-58° ~ 752°F (-50° ~ 400°C)
-58° ~ 392°F (-50° ~ 200°C)
Active Differential Probe
Allows safe and accurate floating measurements with your standard analog or digital oscilloscope.
Switchable between x 10 and x 100 attenuation. Unit includes black and red probes and protective rubber jacket.
Part # PR-60
Cable Tracer Probe
Used in conjunction with any tone generator on the market, the 240P can trace and identify cables and locate faults, even when cables are in a bundle or hidden in a mess of punch down blocks or wall plates. Special inductive plastic tip which prevents accidental shorts (possible with copper-tip tracers) when using near high voltage devices. Adjustable volume tone amplifier and as LED indicator. Manual and one year warranty is included.
Part # 240P
General Purpose DMM Kit
Attach probes or clips to the sheath plug to complete your test. Soft, flexible silicone leads make movement easy. Voltage and current rated for either electronic or electrical applications. IEC61010-2-031 compliant. Silicone lead wire length 60" (1.5m).
Trifold velcro pouch.
Part # TL-130A
Test & Measurement - Probes & Probe Accessories
Probes
Fixed attenuation and switchable from 100 to 250 MHz are available. Each probe includes a full accessory kit with a sprung hook, replacement tip and BNC adapter. Models PR-37AG and PR-37AR have REF position on switch for easy ground referencing. IEC61010-2-031 compliant.
Part #
PR-100A
PR-150
PR-15K
PR-2000
PR-33A
PR-37AR
PR-4000
PR-46A
PR-55
PR-37AG
Attenuation
x100 x1/x10 x1000 x100 x1/x10 x1/x10/REF x100 x10 x1000 x1/x10REF
Input Imped. R
(Mohm)
100
1/10
500
100
1/10
1/10
50
10
100
1/10
C (pF)
6.5
42/12
3
Bandwdt. (MHz)
250
25/150
5
5
46/16
200
15/90
100/15 6/150
5 100
16 250
1 50
100/15 6/150
Volt (VDC+AC max)
1200
600
15,000
2000
600
600
4000
600
10,000
600
Comp. (pF)
-
10..35
10..30
10..30
10..35
10..35
10..30
10..35
10..30
10..35
Cable Lgth
48" (1.2m)
48" (1.2m)
40" (1.0m)
48" (1.2m)
48" (1.2m)
48" (1.2m)
48" (1.2m)
48" (1.2m)
80" (2.0m)
48" (1.2m)
Body Color
Black
Lt. Gray
Red
Red
Black
Red
Red
Gray
Yellow
Gray
Flex Probes
Ideal solution for measuring AC currents, especially for hard to reach conductors. Meets the requirements of oscilloscope users regarding broad bandwidth measurement up to 100 kHz. Flexible and lightweight. No restrictions with regard to duty cycle or overload current. Two year warranty.
Part #
5335
5336
5337
Description
For multimeters, recorders
For oscilloscopes, multimeters
For oscilloscopes, multimeters
Current Range
30A-300A-3000A
300A-3000A
30A-300A
Logic Probes
Tests TTL and CMOS. One year warranty.
Part #
DP-21
DP-52
Description
20 MHz, displays pulse presence and logic states, memory mode
"freezes" pulse display, 1M ohm input impedance
50 MHz, detects 10ns pulse width, overload protected
Pulser Probe
For TTL and CMOS. Produces 10mS pulse signal at
100mA. External square wave terminal. Sync input point. One year warranty.
Part # DP-31A
Test & Measurement - Test Leads, Clips & Adapters
Basic Electronic Test Lead Set
Six piece set with zippered case. Probes, alligator clips and tip extenders for electronic applications.
CAT II 300 V.
Part # TL80A
Deluxe Electronic Test Lead Set
Twenty-two piece set with quadfold pouch. Includes mini alligator clips, hooks and pincers for virtually every electronic need. Slide-on 1c probe tip adapter and test lead couplers. Both modular test leads and lead-probe combinations. CAT II 300 V.
Part # TL81A
SureGrip™ Clips for Use with Test Leads
AC220 AC280
AC285
Part # Description
AC220 Insulated, nickel plated jaws grip objects up to 3/8 inch. Blunt tip grabs round screw heads. CAT III 1000 V, CAT IV 600 V, 10 A.
AC280 Profile narrows to .22 inch at tip. Hook opening .20 inch at front,
.08 inch at base. CAT III 1000 V, CAT IV 600 V, 3A.
AC283 4.5 inch flexible, insulated shaft. Nickel plated pincers open to .20
inch. CAT III 1000 V, CAT IV 600 V, 1 A.
AC285 Multi-purpose tooth pattern grips anything from fine gauge wire to a
3/4 inch nut. Nickel-plated steel jaws. CAT III 1000 V, CAT IV 600
V, 10 A.
TL238 Insulated tip probes help lessen risk of arc flash explosion. Probe extenders keep hands away from live current. Includes one pair each, insulated tip probes, probe extenders and TL224 test leads.
Probes and leads CAT III 1000 V, CAT IV 600 V, 10 A, extenders
CAT III 1000 V 10 A.
517
Test & Measurement - Test Leads, Clips & Adapters
TL220 Industrial Test Lead Set
Starter kit for industrial applications. TP220 has round, stainless steel tip. Includes 1 pair: AC220,
TP220, TL222. CAT III 1000 V, CAT IV 600 V, 10A.
Part # TL220
TL221 SureGrip™ Silicone Test Lead Extension Kit
Superior strain relief. Includes two adapters to extend leads 1.5 m. CAT III
1000 V, 10 A, CAT IV 600 V, 10 A.
Part # TL221
TL223 Electrical Test Lead Set
Starter kit for electrical applications. TP1 has flat blades for wall sockets.
Includes 1 pair: AC220, TP1, TL224. CAT III 1000 V, CAT IV 600 V, 10 A.
Part # TL223
Premium DMM Test Lead Set
Flexible silicone insulated leads are heat and cold resistant. Distinctive comfort grip probes.
Recommended for µV measurements. CAT III 1000
V, 10 A, CAT IV, 10 A.
Part # TL71
Retractable Probe Assembly
Retractable, insulated sharp probe tip. CAT II 300 V,
2 A.
Part # TL40
Push-On Alligator Clips
Slide-on style for test probes. Jaws open to 8 mm. For use with TL71 and TL75 test lead and probe sets. CAT III 1000
V, 10 A, CAT IV 600 V, 10 A.
Part # AC72
Multi-Stacking Banana Plug Patch Cord
Gold Plated Finish
X= Length, 12, 24, 36, 48, 60 (inches). Y = Color, -0
(black), -2 (red). Ordering example: 2948-12-0.
Part # 2948-(X)-(Y)
Nickel Plated Finish
18 AWG wire, .144 O.D. Rating is 5000 VDC, 15 amps, 55°C (131°F) maximum.
X = Length: 4, 8, 12, 18, 24, 36, 48, 60, 72. Y = Color: -0 (black), -1 (brown), -2
(red), -3 (orange), -4 (yellow), -5 (green), -6 (blue), -7 (violet), -8 (gray), -9
(white). Ordering example: B-48-9.
Part # B-(X)-(Y)
Multi-Stacking Sheathed (4mm) Banana Plug Patch Cord
Material is nickel-plated brass. Wire is multi-strand copper. 4ft (1.2m) stackable safety lead. Insulation is silicone. Rating is IEC1010 1000V Cat III, 20A max
(10A cont.), 14°F to 176°F (-10°C to 80°C). Std. colors are -0 (black only), -2 (red only).
Part # 6727
Micrograbber® Test Clip Patch Cord
Hook attaches to components up to .040 O.D. 20
AWG wire, .087 O.D. rating is 150V, 3 amps, 102ºC
(216ºF) maximum. X = Length, 12, 24, 36, 48 (inches). Y = Color, -0 (black), -2
(red). Ordering example: 4613-12-2.
Part # 4613-(X)-(Y)
Kit contains 10 pieces of Model 4613-24, one each of ten colors (black, brown, red, orange, yellow, green, blue, violet, gray and white).
Part # 5525
Minigrabber® Test Clip Patch Cord
Feature a slim (.36) body width. Hook attaches to component leads up to .060 O.D. 18 AWG silicone insulated wire, .144 O.D. Rating is 300V, 5 amps per
IEC1010-2-031 CAT II. X = Length: 12, 24, 36 (inches). Y = colors, -0 (black), -2
(red). Ordering example: 6246-36-2.
Part # 6246-(X)-(Y)
Hook attaches to component leads up to .060 O.D. 20 AWG wire, .087 O.D. Rating is 300V, 5 amps, 102ºC (216ºF) maximum. X = Length: 8, 12, 18, 24, 36, 48, 60. Y = Color: -0
(black), -1 (brown), -2 (red), -3 (orange), -4 (yellow), -5
(green), -6 (blue), -7 (violet), -8 (gray), -9 (white).
Part # 3781-(X)-(Y)
One End Only
Y = colors, -0 (black), -2 (red). Ordering example: 6247-
48-2.
Part # 3780-60-(Y)
Minigrabber® Test Clip Patch Cord Kit
Kit contains 10 pieces of Model 3781-24, one of each color.
Part # 5523
518
Test & Measurement - Test Leads, Clips & Adapters
Minipincer® Test Clip Patch Cord
Pincer opens to .090. 20 AWG wire, .087 O.D. Rating is
300V, 5 amps, 80°C (176°F) maximum. X = Length: 12, 24.
Y = Color, -0 (black), -2 (red). Ordering example: 5419-8-2.
Part # 5419-(X)-(Y)
Miniature Stacking Banana Plug Patch Cord
20 AWG wire, .087 O.D. Rating is 3000 VDC, 5 amps 55°C
(131°F) maximum. X = Length, 4, 8, 12, 18, 24, 36, 48,
60. Y = Color, -0 (black), -2 (red). Ordering example:
1081-4-2.
Part # 1081-(X)-(Y)
SMD Grabber® Test Clip Patch Cord
Pincer opens to .040. 22 AWG wire, .064 O.D. Rating is
150V, 0.5 amps, 102°C (216°F) maximum. X = Length: 6,
12, 24, 36 (inches). Y = Colors: -0 (black), -2 (red).
Ordering example: 5301-6-0.
Part # 5301-(X)-(Y)
SMD Grabber® Test Clip Patch Cord Kit
Kit contains 10 pieces of Model 5301-24, one each of ten colors.
Part # 5521
Alligator Test Clip Patch Cords
Alligator Test Clip Patch Cord
Jaws open to .300 18 AWG wire, .144 O.D. Rating is
150V, 5 amps, 50°C (122°F) maximum. X = Length:
4, 8, 12, 18, 24, 36, 48, 60. Y = Color: -0 (black), -2 (red). Ordering example:
AL-B-4-0.
Part # AL-B-(X)-(Y)
Minigator Test Clip Patch Cord
Jaws open to .187. 18 AWG wire, .144 O.D. Rating is
45V, 5 amps, 50°C (122°F) maximum. X = Length: 4, 8, 12, 24, 36, 48. Y =
Color: -0 (black), -2 (red). Ordering example: MG-B-48-0.
Part # MG-B-(X)-(Y)
20 AWG wire, .087 O.D. Rating is 45V, 5 amps, 50°C
(122°F) maximum. Length is 24 inches. Y = Color: -0
(black), -2 (red). Ordering example: 1236-24-2.
Part # 1236-24-(Y)
Alligator Test Clip Patch Cord Kit
Kit contains 10 patch cords, one each of 10 colors. X = Length, 12, 24, 36, 60
(inches). Ordering example: 6356-12.
Part # 6356-(X)
Retractable Sheath Banana Plug Patch Cord
18 AWG wire, .144 O.D. Rating is 1000V per
IEC1010-2-031, 10 amps, 80°C (176°F) maximum. X = Length, 12, 18, 24, 36,
48, 60. Y = Color, -0 (black), -2 (red). Ordering example: 4911A-12-2.
Part # 4911A-(X)-(Y)
Miniature Banana Plug Patch Cord
20 AWG wire, .144 O.D. Rating is 3000 VDC, 5 amps, 55°C (131°F) maximum. X = Length: 12, 36
(inches). Y = Color: -0 (black), -2 (red). Ordering example: 2842-12-0.
Part # 2842-(X)-(Y)
Piercing Clips to Bantam Plugs Patch Cords
Two conductor twisted pair cable type. Breakout wire is 18 AWG. Length is 60". Clip type is a bed of nails and single needle.
Part # 6484-60
Stacking Pin Tip Plug Patch Cord
20 AWG wire, .087 O.D. Rating is 3000 VDC, 5 amps, 55°C (131°F) maximum. X = Length, 4, 8, 12,
18, 24, 36, 48, 60. Y = Color, -0 (black), -2 (red).
Ordering example: P-12-0.
Part # P-(X)-(Y)
Electrical Test Lead Kits
Deluxe Electronic DMM Test Lead Kit
Modular probes with standard probe tips. Silicone insulated 4 ft. test leads with right-angle DMM plugs fit most meters. Probe tip extender with 3" long tip.
Minigrabber® test clip leads attach to test leads.
Minipincer® test clip lead for fine pitch chip leads.
Maxigrabber® test clips attach to test leads. Nylon storage pouch with compartments for accessories.
Part # 5674C
Basic Electrical DMM Test Lead Kit with Maxigrabber® Test Clips
DMM plugs fit most meters. Maxigrabber® test clips with jaws attach to test leads. Nylon carrying pouch included. Kit contains: Silicone insulated 4 ft. test leads with right-angle DMM plugs, modular electrical test probes with standard tips, Maxigrabber® test clips and nylon storage pouch. Plug type is Straight
DMM. Ratings are CAT III 1000V.
Part # 5900A
Deluxe Electrical DMM Test Lead Kit
DMM plugs fit most meters. Alligator clips attach to the test leads for secure connections. Maxigrabber® test clips attach to test leads. Nylon storage pouch to contain all kit components. Kit contains: Silicone insulated 4 ft. test leads, modular electrical test probes with standard tips, Maxigrabber® test clips with jaws,
Maxigrabber® test clips with hooks, Maxigrabber® test clips with pincers and large alligator clips. Plug type is Straight DMM. Ratings are CAT III 1000V.
Part # 5904A
Electrical DMM Test Lead Kit
DMM plugs fit most meters. Spade lugs connect to test leads and can be secured to binding posts or terminals. Alligator clips plug into the test leads. Kit contains: Silicone insulated 4 ft. test leads with right-angle DMM plugs, modular electrical test probes with standard tips, extended tip probe adapters, insulated spade lugs, medium alligator clips, large alligator clips and nylon storage pouch.
Ratings are CAT III 1000V.
Part # 5673B
Multi-Use DMM Test Lead Kit
DMM plugs fit most meters. Alligator clips attach to test lead for reliable connections. Maxigrabber® test clips with pincers for quick and easy connections. Kit contains: Silicone insulated 4 ft. test leads with right-angle DMM plugs, modular electrical test probes with standard tip, Maxigrabber® with pincer tips and medium alligator clips. Ratings are CAT III 1000V.
Part # 5899A
519
Test & Measurement - Test Leads, Clips & Adapters
Deluxe Multi-Use DMM Maxi-Kit
Modular probes with interchangeable tips. Kit contains: silicone insulated 4 ft. leads with right angle plug, modular probe set with replaceable tips, 5 sets of replacement tips, retractable tip test probe set, test lead coupler set, medium alligator clip set, large alligator clip set, spade lugs, IC probe tip adapter, Minigrabber® test clip leads, Minipincer® test clip leads and nylon storage pouch.
Part # 5677B
SMA Male 50 Ohm Cable
Body/ fittings are passivated stainless steel. Contact is gold plated brass. X = Length. Ordering example:
4846-BB-24.
Part #
4846-BB-(X)
4846-K-(X)
4846-X-(X)
Cable Type
50 ohm, RG316/U, .098" O.D. Rating is
200°C maximum. Loss is .56 dB/ft. at
3.0GHz maximum.
50 ohm, RG174/U, .100" O.D. Rating is
85°C maximum. Loss is .45 dB/ft. at
1.0GHz maximum.
50 ohm, RG142B/U, .195" O.D. Double shield. Rating is 200°C maximum. Loss is .67 dB/ft. at 12.4GHz maximum.
Available
Length (inches)
24, 48, 60
24, 48, 60
24, 48, 60
Replacement DMM Test Lead Sets
Monolithic probes with fixed tips. Durable 080 tips for long life. Comfort-grip probe. Silicone insulated 4 ft.
leads fit most DMMs from Fluke, HP (Agilent),
Wavetek (Meterman), Amprobe, Greenlee and others.
Part #
5519A
Description
Standard tip Nickel/brass
Plug Type
Right-angle DMM
Ratings
CAT III 1000V
UL
Replacement DMM Test Leads
Plugs fit most popular DMM's from Fluke, Wavetek
(Meterman), HP (Agilent), Amprobe, Greenlee and others. Silicone insulated 4 ft. leads. Retractable sleeve plugs fits all banana jacks, binding posts and DMM input jacks.
Part #
5907A
Applications
Hand-held DMM modular test leads
Features
Right-angle DMM plug
Ratings
CAT III 1000V
BNC Male Cable with Molded Strain Relief
Model 2249-C
The 50 ohm RG58C/U .195" O.D. cable makes it ideal for most test and measurement applications. Features long strain reliefs for extended wear.
Part #
2249-C-6
2249-C-12
2249-C-24
2249-C-36
2249-C-48
2249-C-60
2249-C-72
2249-C-120
2249-C-144
2249-C-180
2249-C-240
2249-C-300
2249-C-360
2249-C-600
Length feet (m)
0.50 (0.2)
1 (0.3)
2 (0.6)
3 (0.9)
4 (1.2)
5 (1.5)
6 (1.8)
10 (3.1)
12 (3.7)
15 (4.6)
20 (6.2)
25 (7.7)
30 (9.3)
50 (15.2)
Model 2249-E
Uses 75 ohm .242" O.D. cable, making it the right choice for use with TV, video and LAN signals.
Part #
2249-E-6
2249-E-12
2249-E-24
2249-E-36
2249-E-48
2249-E-60
2249-E-72
2249-E-120
2249-E-144
2249-E-180
2249-E-240
Length feet (m)
0.50 (0.2)
1 (0.3)
2 (0.6)
3 (0.9)
4 (1.2)
5 (1.5)
6 (1.8)
10 (3.1)
12 (3.7)
15 (4.6)
20 (6.2)
Model 2249-K
Offers superior flexibility in a 50 ohm cable.
Part #
2249-K-48
2249-K-60
2249-K-120
Length feet (m)
4 (1.2)
5 (1.5)
10 (3.0)
Your test equipment is only as good as the quality of your probe, test leads & clips. Choose high quality probes and test leads that are best for your specific application. The proper accessory can make the difference in effective testing.
Let our sales representative help you determine which products are appropriate for your application!
520
Test & Measurement - Test Leads, Clips & Adapters
BNC Female to Minigrabber® Test Clips
Rating is 300 VRMS, 55°C (131°F) maximum. Overall length is 7.0"
Part # 3788
Multi-Stacking Banana Plug to Maxigrabber® Test Clip
Hook attaches to components up to .060 O.D. 20
AWG wire, .087 O.D. Rating is 300V, 5 amps, 55ºC
(131ºF) maximum. X = Length; 12, 24, 36, 48, 60
(inches). Y = Color, -0 (black), -2 (red). Ordering example: 4996-48-2.
Part # 4996-(X)-(Y)
Multi-Stacking Banana Plug to Micrograbber® Test Clip
Hook attaches to components up to .040 O.D. 20 AWG wire, .087 O.D. Rating is 150V, 3 amps, 55°C (131°F) maximum. X = Length; 24, 36, 48, 60. Y = Color, -0 (black), -2
(red). Ordering example: 5053-24-(X)-(Y).
Part # 5053-(X)-(Y)
Multi-Stacking Banana Plug to Minigrabber® Test Clip
Hook attaches to component leads up to .060 O.D. 20 AWG wire, .087 O.D. Rating is 300V, 5 amps, 55ºC (131ºF) maximum. X = Length; 12, 24, 36, 48, 60. Y = Color for 3872, -0
(black), -2 (red). Y = Color for 3782; -0 (black), -1 (brown), -2
(red), -3 (orange), -4 (yellow), -5 (green), -6 (blue), -7 (violet), -8
(gray), -9 (white). Ordering example: 3782-24-0.
Part # 3782-(X)-(Y)
Multi-Stacking Banana Plug to Minipincer® Test Clip
Pincer opens to .090. 20 AWG wire, .087 O.D.
Rating is 300V, 5 amps, 55°C (131°F) maximum. X =
Length: 24, 36 (inches). Y = Colors, -0 (black), -2
(red). Ordering example: 5421-36-0.
Part # 5421-(X)-(Y)
Multi-Stacking Banana Plug to SMD Grabber® Test Clip
Pincer opens to .040. 22 AWG wire, .064 O.D. Rating is
150V, 0.5 amps, 55°C (131°F) maximum. X = Length, 12,
24, 36. Y = Colors, -0 (black), -2 (red). Ordering example:
5302-24-2.
Part # 5302-(X)-(Y)
BNC Male With Molded Strain Relief To Minigrabber® Test Clips
Rating is 300VRMS maximum, 50°C (122°F) maximum. BNC connector and strain relief material same as Model 2249-C. X
= Length. Ordering example: 5187-C-36.
Part #
5187-K-(X)
5187-C-(X)
Cable Type
RG174/U, .100" O.D.
RG58C/U, .195" O.D.
Available Length (inches)
24, 36, 48, 60
24, 36, 48, 60
Test Lead Holders
Part #
1508
2708
4408
Color Max Cable Dia.
Orange .210"
Blue .450"
Black .320"
No. of Slots
14
9
10
Multi-Stacking Banana Plug to Minigrabber® Test Clip
Features a slim (.36) body width. Hook attaches to component leads up to .060
O.D. 18 AWG silicone insulated wire, .144 O.D. Rating is 300V, 5 amps. X=
Length, 12, 24, 36 (inches). Y= Colors, -0 (black), -2 (red). Ordering example:
6249-12-0.
Part # 6249-(X)-(Y)
Test Probe with Screw-on Alligator Clips
Test probe has a stainless steel sharp tip with 8/32 threaded base. Alligator clip screws onto probe tip.
Test leads fit all standard DMM with safety style banana jacks. Complies to International Safety
Standard IEC 1010-2-031. Banana plug is nickel plated beryllium copper. Alligator contacts is nickel plated steel. Spring is steel probe and banana insulation is triax (alloy, nylon, ABS). Alligator insulation is nylon 6. Wire is silicone.
Part # 6723
Alligator Test Clip To Insulated Spade Lug
Jaws open to .300. 18 AWG wire, .144 O.D. Rating is 150V, 5 amps, 50°C
(122°F) maximum. Length is 36 inches. Y = Color: -0 (black), -2 (red).
Part # 1960-36-(Y)
Banana Plug to Banana Jack
18 AWG wire, .144 O.D. Rating is 5000 VDC, 15 amps, 55°C (131°F) maximum. X = Length: 12, 24,
36, 48, 60. Y = Color: -0 (black), -2 (red). Ordering example: 4702-24-0.
Part # 4702-(X)-(Y)
Minigrabber® Test Clip With Banana Jack
Banana jack built into plunger. Overall length is 2.54".
Raring is 300V, 5 amps, 102°C (216°F) maximum. Y =
Color: -0 (black), -2 (red). Ordering example: 4723-2.
Part # 4723-(Y)
.025 Square Pin Receptacle Patch Cord
22 AWG wire, .064" O.D. Rating is 45 VAC/60 VDC, 3 amps, 50°C (122°F) maximum. X = Length, 6, 12, 24, 36
(inches). Y = Color, -0 (black), -2 (red). Ordering example: 4741-6-0.
Part # 4741-(X)-(Y)
521
Test & Measurement - Test Leads, Clips & Adapters
Retractable Sheath Banana Plug To Banana Jack
18 AWG wire, .144 O.D. Rating is 1000V AC/DC maximum, 7 amps, 55°C (131°F) maximum. Length is 36 inches. Y = Color: -0 (black), -2 (red). Ordering example: 5259-36-0.
Part # 5259-36-(Y)
Piercing Clips to Sheathed Banana Plugs Test Leads
Pierces 19 to 26 AWG wire. Length is 48". Wire is
18 AWG silicone test lead wire. For use with digital multimeters from Fluke, Wavetek (Meterman),
Amprobe, Greenlee and others. (Y) = Color: -0
(black), -2 (red). Clip type is a bed of nails and single needle. Ordering example: 6483-48-0.
Part # 6483-48-(Y)
Deluxe Automotive DMM Test Lead Kit
Silicone insulated 4ft (1.2m) test leads with rightangle DMM plugs. Heavy-duty modular test probes with stainless-steel tips. Heavy-duty alligator clips.
Insulation piercing clips. Maxigrabber® test clips with alligator jaws. Maxigrabber® test clips with hook.
Backprobe pins. Nylon storage pouch.
Part # 6530A
Double Banana Plug With Wire Guide
Set screws secure leads. Simplifies cable construction or component mounting. Accepts cables to 0.22in (5.59mm) dia. max., (18-22 AWG wire). Banana Plug/Jack is brass;
Spring is heat treated beryllium copper; Finish is nickel plating. (Y) = Colors -0 (black), -1 (brown), -2 (red), -3
(orange), -4 (yellow), -5 (green), -6 (blue), -7 (violet), -8
(gray), -9 (white). Available colors are Black, brown, red, orange, yellow, green, blue, violet, gray, white.
Part # MDP-(Y)
Stackable Double Banana Plug With Cable Guide
Features simplified attachment of cables or small components by means of set screws. For test versatility, banana plugs can be vertically stacked. Banana plug spring is Beryllium Copper for long insertion life. Colors= 0 (Black), 1 (Brown), 2
(Red), 3 (Orange), 4 (Yellow), 5 (Green), 6 (Blue), 7 (Violet), 8 (Gray), 9 (White).
Model: 4892-0 (Gold Plated, Black), Model 4892-2 (Gold Plated, Red).
Part # 4892(Y)
Standard Banana Plugs
Do-It-Yourself Solderless Stackup Banana Plug
Internal set screw holds wire firmly. Accepts 18-22 AWG wire. Accepts standard banana plug, fits standard 0.166 in (4.22mm) dia. banana jack. Banana/jack is brass. Spring is heat treated Beryllium copper. Y = Color: -0 (black), -1 (brown),
-2 (red), -3 (orange), -4 (yellow), -5 (green), -6 (blue), -7 (violet), -8 (gray), -9
(white). Ordering example: 1325-7.
Part #
1325-(Y)
5406-(Y)
Plating
Nickel
Gold
Available Colors
Black, brown, red, orange, yellow, green, blue, violet, gray, white
Black, red
Standard Banana Plugs
(cont.)
Do-It-Yourself Solderless Stackup Banana Plug with Safety Shield
Internal set screw holds wire firmly. Safety collar insulates exposed wire leads.
Accepts 18-22 AWG wire. Accepts standard banana plug, fits standard 0.166 in.
(4.22mm) dia. banana jack. Banana plug/jack is brass. Spring is heat treated
Beryllium copper. Y = Color: -0 (black), -1 (brown), -2 (red), -3 (orange), -4 (yellow), -5 (green), -6 (blue), -7 (violet), -8 (gray), -9 (white). Ordering example:
1825-2.
Part #
1825-(Y)
4897-(Y)
Plating Insulation Available Colors
Nickel
Gold
ABS
ABS
Black, brown, red, orange, yellow, green, blue, violet, gray, white
Black, red
BNC Female To Double Stacking Banana Plugs
Rating is 500VRMS max., 50°C (122°F) max.
Part # 1269
BNC Male To Stackable Binding Posts
Rating is 500 VRMS max., 50°C (122°F) max.
Part # 1296
Panel Mt IEC1010 Banana Jacks for Sheathed Plugs
Gold-plated nickel (72912 and 72913). 1000V Cat III, 36A Max. Y = Colors: -0
(black), -1 (brown), -2 (red), -4 (yellow), -5 (green), -6 (blue), -7 (violet), -8
(gray), -9 (white).
Part #
72912-(Y)
72913-(Y)
72930-(Y)
Terminal
Threaded stud
Solder Tab
Threaded stud, hexagonal nut
Available Colors
Black, red
Black, red
Black, brown, red, yellow, green, blue, violet, gray, white
Die Cast Aluminum Box with Cover
Shielded protection for your prototype designs, filters and more. Box size is
2.25" x 1.13" x 0.88". Blue bake enamel finish. Cover and screws included with all boxes.
Part #
2390
2391
Description
BNC (F) / BNC (F)
BNC (M) / BNC (F)
IEC Insulated BNC Male 50 Ohm Cable
Insulated BNC connectors for added safety. Meets IEC requirements for 500V
CAT I, 150V CAT II. Black.
Part #
72926-C-40
72926-C-80
Description
40 in (100cm)
80 in (200cm)
Insulated BNC Male / 4mm Plugs
Insulated BNC connector and sheathed, stackable plugs for added safety. Thin
RG58 cable for shielded, yet flexible connections. Impedance is 50 ohm. 500V
Cat I, 150V Cat II, 3A. Black.
Part #
72927-C-40
72927-C-80
Description
40 in (100 cm)
80 in (200cm)
522
Test & Measurement - Test Leads, Clips & Adapters
IEC Insulated BNC to Stackable/Retractable Sheath
Banana Plugs
Insulated BNC connector and sheathed, stackable/retractable plugs for added safety. Impedance
50 ohm. Rating is 33 Vrms / 70 Vdc, 6A. Length is 10 in (25cm).
Part #
72908
72909
Description
BNC (m)
BNC (f)
SMD High Density Circuit Test Kit
Includes: 2 DMM leads with 4mm plugs, 2 test probes with spring-loaded tips, 6 micro SMD grabbers (72902), 6 adapter leads 0.8mm female to
0.4mm jack, 2 mini SMD grabbers with 4mm connectors, 2 holding rods (72903).
Part # 72935
Micro SMD Grabber Test Clips Kit
Kit of 12 Micro SMD Grabbers in 6 colors. Grabbers are designed for easy attachment to SMD chips with pitches down to 0.008" (0.20 mm). Insulated tip minimizes shorting on adjacent pins. Gold plating for low resistance connections. Kit also includes 6 holding rods to reinforce connection positions during side-by-side measurements. Also includes 12 micro leads with 0.8mm female/0.8mm male connectors.
Part # 72902
Clip Lead for Micro SMD Grabber 0.8mm/4mm
Clip lead for easy attachment of Micro SMD Grabber or
Mini SMD Grabber to standard test leads. 0.8mm
female/4mm female. Black.
For red, replace suffix with -2.
Part # 72905-0
Mini SMD Grabber Test Clip
Designed for easy attachment to SMD chips with pitches down to 0.032" (0.80 mm). Insulated shaft can be bent up to 36° for versatile attachment in awkward locations or close proximity to other clips. Rotating jaws increase versatility in connection and stacking. Thin
(3 mm) profile allows close placement to adjacent clips. Compatible with leads with Ø0.8mm female connectors. Black. For red, replace suffix with -2.
Part # 72906-0
Mini SMD Grabber Test Clip with Lead and 4mm Jack
Mini SMD grabber test clip with 20 inch (50cm) lead and
4mm jack for easy attachment to DMM leads. Black.
For red, replace suffix with -2.
Part # 72929-20-0
SMD Test Probe with Sharp, Spring Mounted Tip
SMD test probe with sharp, spring mounted tip and
2mm jack. Provides ultra-fine control for probing high density SMD circuits. Very fine 0.03 inch
(0.7mm) diameter stainless steel tip is spring mounted for controlled pressure. Removable, clear IC insulator cap prevents shorting of adjacent IC loges. Sheathed 2mm receptacle adapts to 2mm test leads and adapters. Black. For red, replace suffix with -2.
Part # 72923-0
Mini Alligator Clip With 2mm Jack
Rating: 600V Cat II, 10A. Black. For red, replace suffix with -2.
Part # 72924-0
2mm/4mm Male-Male Test Leads
39 inches (991mm). Black. For red, replace suffix with -2.
Part # 72936-0
4mm/2mm Plug/Jack Adapters
Allow easy adaptation between standard 4mm jacks and plugs and SMD test 2mm jacks and plugs. Black. For red, replace -0 suffix with -2.
Part #
72914-02
72914-0
72915-0
72916-0
72917-0
Description
4mm jack/2mm plugs (1 black and 1 red)
4mm jack/2mm plug
2mm jack/2mm plug
4mm jack/2mm jack
4mm plug/2mm jack
Insulated BNC to Dual 4mm Bananas
Insulated BNCs and sheathed banana jacks and plugs provide added safety. Meets IEC rating of 500V Cat I, 150V Cat II.
Part #
72910
72911
72937
72938
Description
BNC male to 2 banana plugs
BNC female to 2 banana plugs
BNC male to 2 banana jacks
BNC female to 2 banana jacks
Multi-RF Direct Adapter Kit
A comprehensive kit including the most frequently used 50 ohm RF adapters in a rugged pistol-grip case. Allows for direct adaptation without intermediate couplers. All parts are precision machined brass, not die-cast, with tarnish resistant nickel plating. Male center pin contacts are gold plated brass. Female center contacts are gold plated heat treated beryllium copper.
Insulation material is high density PTFE. Includes part numbers 3535, 3288,
3844, 4288, 4290, 4289, 4291, 4298, 4297, 4299, 4292, 4294, 4293, 4295,
4296, 3283, 3533, 3285, 3284, 4940, 3841, 3842, 4282, 4283, 4284 and 4286.
Part # 72934
SMA Adapter Kit
A consolidated kit including the most frequently used SMA adapters in a rugged pistol-grip case. Allows for direct adaptation without intermediate couplers. All parts are precision machined brass, not die-cast, with tarnish resistant nickel plating. Male center pin contacts are gold plated brass.
Female center contacts are gold plated heat treated beryllium copper. Insulation material is high density PTFE. Includes part numbers:
4282, 4283, 4284, 4286, 4289, 4290, 4291, 4292, 4293, 4294, 4295, 4296,
4297, 4298 and 4299.
Part # 72931
523
Test & Measurement - Test Leads, Clips & Adapters
N Adapter Kit
A consolidated kit including the most frequently used Type
N adapters in a rugged pistol-grip case. Allows for direct adaptation without intermediate couplers. All parts are precision machined brass, not die-cast, with tarnish resistant nickel plating. Male center pin contacts are gold plated brass. Female center contacts are gold plated heat treated beryllium copper. Insulation material is high density PTFE. Includes part numbers: 3288, 3535, 3841, 3842, 3843,
4286, 4297, 4298, 4299, 5089, 4240-50 and 4240-75.
Part # 72932
Broadcast BNC Adapter Kit
A comprehensive kit including the most frequently used 75 ohm BNC adapters in a rugged pistol-grip case. Allows for direct adaptation without intermediate couplers. All parts are precision machined brass, not die-cast, with tarnish resistant nickel plating. Male center pine contacts are gold plated brass. Female center contacts are gold plated heat treated beryllium copper.
Insulation material is high density PTFE. Includes part numbers: 6737, 6738,
67.9, 6740, 6754, 6779, 6780, 6781, 6782, 1297, 3837, 4043, 4267, 5319, 4054,
4719, 5008, 6519 and 3840-75.
Part # 72933
Multi-Stacking Double Banana Plug to Minigrabber® Test Clips
Rating is 300 VRMS, 50°C (122°F) maximum. Cable type is RG58C/U, .195" O.D. X = Length, 18, 24, 36,
48, 60. Ordering example: 3786-C-60.
Part # 3786-C-(X)
Do-It-Yourself Minigrabber® Test Clips
Overall length is 2.54". Rating is 300V, 5 amps,
120°C (126°F) maximum. Y = Color. Available colors:
-0 (black), -1 (brown), -2 (red), -3 (orange), -4 (yellow), -5 (green), -6 (blue), -7
(violet), -8 (gray), -9 (white). Ordering example: 3925-8.
Part #
3925-(Y)
4555-(Y)
4176-02
5522
Description
.090" Max. Wire Dia. (inches)
.144" Max. Wire Dia. (inches)
Kit contains 2 pieces of 3925, one black/one red
Kit contains 10 pieces of 3925, one of each color
Bantam Plug To Minigrabber® Test Clips
Rating is 300 VRMS, 50°C (122°F) maximum. Cable type is 2 conductor shielded cable, .180" O.D. Brass or nickel plated. Length is 60 inches.
Part # 5019N-60
SMD Grabber® Test Clip With .025" Square Pin
Pincer type contact designed for testing .050" lead pitches such as SOJ, SOIC and PLCC surface mounted packages. Overall length is 1.71". .15" sq. access hole leads to .025" sq. pin. Overall length is 1.73". Rating is 150V, 0.5 amps,
102°C (126°F) maximum. Y = Color. Available colors: -0 (black), -1 (brown), -2
(red), -3 (orange), -4 (yellow), -5 (green), -6 (blue), -7 (violet), -8 (gray), -9
(white). Ordering example: 5360-7.
Part #
5927
5360-(Y)
Description
Test clip with .025" Sq. Pin Kit. Contains 10 Model 5360 clips, one of each color.
Test clip
Do-It-Yourself Minipincer® Test Clip
Pincer type contact. Overall length is
2.59". Rating is 300V, 5 amps, 80°C
(176°F) maximum. Y = Color: -0 (black), -
2 (red), -4 (yellow), -5 (green), -6 (blue). Ordering example: 5418-2.
Part # 5418-(Y)
Maxigrabber® Test Clip Set with Jaws
Set of 2, one red and one black. Alligator jaws open to fit 0.50" dia. Overvoltage CAT III, 1000V, 10A per
IEC1010-2-0312.
Part # 5912B
Medium Alligator Clip Sets
Fits on any DMM or banana plug test lead. Rated CAT III
300V 5A. Jaws open to 0.30".
Part # 5916A
Bantam Plug To Two Alligator Clips
Rating is 150 VRMS, 50°C (122°F) maximum. Cable type is 2 conductor shielded microphone, .180" O.D.
Brass. X = Length: 36, 60 inches. Ordering example: 5026-36.
Part # 5026-(X)
Micro SMD Grabber® Test Clip For 1.25 to 0.2 MM Lead Pitch
Use with PQFP, SOIC, TSOP and SSOP packages with lead pitches down to 0.2 to 0.5 mm. Thin body allows an unlimited number of clips to be stacked side by side. Maximum frequency is 100MHz. Rating is 45V. Supplied with female to male flying leads.
Part #
6311
6312
6313
6351
6352
6353
Profile Height
14mm
14mm
14mm
14mm
14mm
14mm
Lead Pitch
.85 - 0.2mm
1.25 - 0.3mm
1.25 - 0.3mm
.85 - 0.2mm
1.25 - 0.3mm
1.25 - 0.3mm
Tip Qty Colors
Long
Long
2
2
Short 2
Long 10
Long 10
Short 10
2
2
2
2
2
2
Insulation Piercing Clip Sets
Double V block centers wire. Set of two (red and black jacks). Bright yellow for easy location. Attach to test leads.
Part #
6405
6413
Type
Test lead clip
Probe tip adapter
Multi-Stacking Banana Plug To Alligator Test Clip
Multi-Stacking Banana Plug to Alligator Test Clip
Jaws open to .300. 18 AWG wire, .144 O.D. Rating is
150V, 5 amps, 50°C (122°F) maximum. X = Length: 8,
12, 24, 36, 48, 60. Y = Color: -0 (black), -2 (red).
Ordering example: 1166-12-0.
Part # 1166-(X)-(Y)
Banana Plug To Alligator Clip Patch Cord Kit
Kit contains 10 1166 patch cords, one each of 10 colors.
Length is 36 inches.
Part # 6357-36
524
Test & Measurement - Test Leads, Clips & Adapters
Alligator Test Clip To Pin Tip Jack With Insulator
Alligator clip has .300" maximum jaw opening. Accepts
.080" dia. pin. Overall length is 2.16". Rating is 150V, 5 amps, 50°C (122°F) maximum. Sold unassembled, 10 clips and 10 insulators per package. Y = Color, -0 (black), -2 (red). Ordering example: 1437-0.
Part # 1437-(Y)
Alligator Test Clip To Banana Jack With Insulator
Alligator clip has .300" maximum jaw opening.
Overall length is 2.16". Rating is 150V, 5 amps, 50°C
(122°F) maximum. Sold unassembled. Y = Color.
Available colors: -0 (black), -2 (red). Ordering example: 2240-2.
Part #
2240-(Y)
3289-(Y)
Description
10 clips and insulators/pkg. Nickel plating.
1 clip and insulator/pkg. Gold plating.
Insulated Minigator Test Clip To Pin Tip Jack
Alligator clip has .187" max. jaw opening. Overall length is 2.05". Rating is 45V, 5 amps, 50°C (122°F) maximum. Y = Color, -0 (black), -2 (red). Ordering example: 3491-0.
Part # 3491-(Y)
Do-It-Yourself SMD Grabber® Test Clips
Pincer type contact designed for testing .050" lead pitches such as SOF, SOIC and PLCC surface mounted packages. Overall length is 1.71". .090 dia. maximum wire opening. Rating is 150V, 0.5 amps, 102°C (216°F) maximum. Y = Colors: -0 (black), -2 (red), -5 (green).
Ordering example: 5243-0.
Part # 5243-(Y)
Extra Large Alligator Clip Set
Insulated clip with sheathed 4mm receptacle accepts flexible lead sets 5907A, 5908A, and 5909A. Jaw opens to 1.0" maximum. Overall length is 3.5". Conforms to
IEC1010-2-031, Overvoltage category III, 1000V, 20 amps max. Set of 2 clips black and red.
Part # 6041B
Unplated WE310 Plug To Minigrabber® Test Brass Clips
Rating is 300 VRMS, 50°C (122°F) max. Cable type is two conductor shielded twisted pair. Length is 60 inches.
Part # 4812-J-60
BNC Male 50 Ohm Cable
Rating is 500 VRMS max., 80°C (176°F) max. Cable type is 50 ohm, RG58 type .195" O.D. X = Length
(in.): 6, 12, 24, 36, 48, 60, 72, 120, 180, 240.
Part # 5697-(X)
Terminal Strip Adapter, 4mm Safety Banana Jack to 6/32
Easily connect your DMM safety sheathed test leads to terminal strips via this handy 6/32 thread adapter. Material is nickel-plated brass. Insulation is Iucel acetal polymer.
For CE compliance, not intended for hand held use at voltages above 33 Vrms/70 Vdc, (14°F to 212°F) -10°C to
100°C. Std. colors are -0 (black) and -2 (red).
Part # 6720
Do-It-Yourself 4mm Stackable Banana Plug
Build your own safety stacking leads with do-it-yourself safety-sheathed 4mm stackable banana plugs. Material nickel-plated brass. Insulation is Iucel acetal polymer. Rating is ICE1010 1000V
Category III**, 20A, 14°F to 176°F (-10°C to 80°C). Std. color are -0 (black) and
-2 (red). **When plug is correctly assembled and terminated.
Part # 6721
4mm Safety Banana Jack to Banana Plug Adapter
Accepts safety-sheathed 4mm banana plug and adapts to standard banana plug. Material is nickel plated brass. For
CE compliance, not intended for hand held use at voltages above 33 Vrms/70 Vdc. Std. colors: -0 (black) and -2 (red).
Part # 6728
Do-It-Yourself 4mm Right Angle Banana Plug
Build your own safety leads with do-it-yourself safetysheathed 4mm right angle banana plug. Material is nickel-plated brass. Insulation is Iucel acetal polymer. Rating is IEC1010 1000V Category III**, 20A, 14°F to 176°F (-
10°C to 80°C). Std. colors are -0 (black) and -2 (red).
**When plug is correctly assembled and terminated.
Part # 6729
Kelvin Lead Set with Kelvin Clips
Gold-plated Kelvin clip jaws allow 4-wire resistive measurements. Silicone insulated 3.3ft (1m) test lead.
Safety sheathed straight DMM plugs for convenient bench use. Clips firmly grip test points for low-loss connection. Rating for CE compliance is not intended for hand held use at voltages above 33 Vrms/70 Vdc.
Part # 6730
Universal Power Adapter
Optional power adapter for 6731 Active Differential Probe.
Part # 6732
Test Lead Wire with Silicone or PVC Insulation
Choose from heat-resistant silicone or PVC insulation. 50ft
(15.2m) of unterminated 18 AWG test lead wire. Very flexible with 6 strands of 36 AWG tinned copper conductor.
Create you own test leads with the adapters. Wide temperature range of -58°F to 302°F (-50°C to 150°C) with PVC insulation. Std. colors are -0 (black), -2 (red).
Part #
6733
6734
Insulation Type
Silicone
PVC
525
Test & Measurement - Test Leads, Clips & Adapters
BNC Male 50 Ohm Cable - Field Serviceable Connector
Rating is 500 VRMS max., 80°C (176°F) max. Cable type is 50 ohm, RG568C/U, .195" O.D. BNC: Body:
Brass, tarnish resistant plating. Dielectric is PTFE. Center contact is gold plated brass. X=Length (in.): 6, 12, 18, 24, 36, 48, 60, 72, 96.
Part # BNC-C-(X)
Test Leads
Part #
DL243C
DL248C
TL245
TL246B
TL35A
TL36
Description
Deluxe Silicon Test Lead Kit. Includes lead wires, standard tips, alligator clips, spade lugs, and carry case. EN61010-2-031
Safety Approved.
Same as DL243C plus spring loaded crimp tips and tip length extenders.
Standard test leads with shrouded banana plugs, 36" (91cm).
Large 0.5" (12.7mm) jaw, alligator clip with 48" (122cm) silicon insulated lead wires.
Test leads with shrouded banana plugs and alligator clips.
Test leads with shrouded banana plugs and CE approved alligator clips.
Semiconductor Test Leads
Specialized semiconductor test lead set for testers.
Three conductor lead with 4mm banana plugs to mini-IC test clips in yellow, green and blue. Length is
30 (76 cm).
Part # FP-6
Replacement Test Leads
Deluxe test lead sets. IEC61010 1000V CATIII rating.
Silicone lead wire length 60" (1.5 m). Black alligator clip included. Threaded tips fit TL-3 Accessory Kit items.
Part # TL-2A
Economical replacement test leads. 1500V 3A ratings. PVC lead wire, 40" (1.0 m). Black and red alligator clips.
Part #
TL-1
TL-4
Description
Safety shrouded banana plugs
Un-shrouded banana plugs
Test Accessory Pairs
Part #
AD-101
CC-104
TIP-102
TIP-104
TIP-110
TIP-125A
TIP-127
TIP-129
TIP-130
TL-140
Description
Banana plug adapter set with 42V (1000V) 36A rating with trained user.
Silicone lead set with highly flexible silicone jacket, 4mm sheathed straight to right-angle plugs, 60" (1.5m) length, and
IEC61010 1000V CATIII 12A rating.
Insulated alligator clip set with IEC61010 1000V CATIII 20A rating.
Insulated space lug set with 42V (1000V) 36A rating with trained user.
Very fine tip probe set with extended length with SS tip and
IEC61010 1000V CATIII 20A rating.
Alligator style clip set with rigid clip body and IEC61010 1000V
CATIII 20A rating.
Flexible pincer clip set with flexible shaft and IEC61010 1000V
CATIII 6A rating.
Standard alligator clip set with IEC61010 300V CATI 3A rating.
Probe body set with 2mm probe tip and IEC61010 1000V CATI-
II 36A rating.
Five-way test clip with five-way communication clip and 60"
(1.5m) silicone leads.
Special BNC Cable Assemblies
Standard BNC to alligator clips or sheathed stacking plugs. Model CC-21 is black, molded strain release boot provides for long-life. RG58C/U cable with 50 ohm impedance. Model CC-130 with fully insulated BNC male to sheathed stacking 4mm plugs. Meets IEC61010 safety standards.
Includes highly flexible RG58 type cable in 2.0 meter length.
Part #
CC-130
CC-21
Length
80" (2.0 m)
40" (1.0 m)
BNC Cable Assemblies
Standard BNC cable assemblies in convenient lengths. Black, molded strain release boots provides for long-life. RG58C/U cable and 50 ohm impedance. CC-110 is a fully insulated BNC male to male cable assembly. Meets IEC61010 safety standards. Uses highly flexible RG58 type cable in two meter length.
Part #
CC-110
CC-150
Length
80" (2.0 m)
48" (1.2 m)
Test-Pro® Alligator Clips
Connect to Deluxe Test Leads to increase lead length to 52 inches.
Part # 61-443
Twin Lead Tester
Check voltage from 80V to 500V AC/DC. Heavy-duty test probes. Five year warranty.
Part # 61-503
526
Test & Measurement - Test Leads, Clips & Adapters
Test Lead Accessories
Part #
TL-5
TL-58
TL-100
TL-104
Description
1 red and 1 black, with 2 industrial type long insulated prod handles and spade pointed probe tips connected to UL-1244 Type Safety Shielded
90 degree male banana jacks
Standard test leads
Premium test leads with alligator clips included
Premium test leads with alligator clips included
For Use With
61-740, 61-741 and 61-742
360 Series,
640 Series and
61-631
Works with
320 Series
Meters
Works with
770, 760
Series
Modular Adapters
Reverse-wired adapters for easy testing of circuits without service interruption. Easy-to-read label identifies individual conductors and pins defined with number, color and polarity identifications. Large perforated test pads allow secure attachment of test probes and alligator clips. Sturdy, stainless steel belt clip.
Part # Description
62-098
62-096
62-094
8-position adapter, EIA/TIA Category 5 jacks, internal circuit design to reduce attenuation, coupling, NEXT
6-position adapter, LED indicators display jack addresses, polarity, incoming call identification, push button tip/ring test
4-position adapter, high-performance jacks
Test Leads and Clips/Cable Ties
40mm Insulated Alligator Clips
Part #
33-411-0
33-412-0
33-419-10
Description
Bulk black
Bulk red
Pkg 5 red/black
51mm Alligator Clips (with screw)
Part #
33-430-0
33-430-10
Part #
33-431-0
33-432-0
33-439-10
Description
Bulk
Pkg 10
51mm Insulated Alligator Clips
Description
Bulk black
Bulk red
Pkg 5 red/black
51mm Vinyl Insulators
Part #
33-491-0
33-492-0
33-499-10
Description
Bulk black
Bulk red
Pkg 5 red/black
Test Leads and Clips/Cable Ties
(cont.)
Clip Lead Sets
Set of 10 18" clip leads with 31mm insulated clips. 24 AWG stranded wires. Colors are 2 red, 2 black, 2 green, 2 yellow and 2 white.
Part #
33-210-0
33-210-10
Description
Bulk set of 10
Display pkg
Seizer Probes
Part #
33-360-2
33-361-0
33-362-0
Description
Pkg 1 red 1 black
Black
Red
Set of 4 heavy duty 30" clips leads with 50mm clips.
Colors are black, red, yellow and white.
Part #
33-230-0
33-230-4
Description
Bulk set 4
Display pkg
Set of 10 heavy duty 30" clip leads with 50mm clips. Five different colors.
Part #
33-220-0
33-220-10
Description
Bulk set 10
Display pkg
32mm Alligator Clips
Part #
33-400-0
33-400-10
Description
Bulk
Pkg 10
32mm Insulated Alligator Clips
Part #
33-409-0
33-409-10
Description
Bulk
Pkg 10
32mm Vinyl Boots
Part #
33-400B-0
33-400R-0
Description
Bulk black
Bulk red
Length
-
55mm
55mm
527
Test & Measurement - Test Leads, Clips & Adapters
Modular Plug Adapters
Use these adapters to connect butt sets, telephone test sets, tone generators and network test equipment to data and telephone lines using modular plug connections to perform testing of the signals and data being carried. Nylon-reinforced ABS plastic. Easy-to-read wire layout label. Removable/replaceable cord. In-line adapters. Snagless plugs and belt clip. One year warranty. Copper contacts are notched to keep alligator clips attached during testing.
Part #
1902
1903
1904
Description
8-way RJ45 modular plug adapter
6-way RJ11 modular plug adapter
4-way RJ22 modular plug adapter
Test Leads
Plastic test prod handles, 4" long, 3/8" diameter, with prods 1" long. Red and black. Equipped with 48" kinkless plastic-covered leads .135" O.D. Available with either insulated banana plugs or phone tips at other end, to fit standard American jacks.
Part #
466
467
Test Lead Type
Phone tips
Banana plugs
All-Purpose Test Lead Set
Tiny, sturdy, push-to-clip prods can be firmly attached to hard-to-reach components in chassis-whether large or small terminals. Clip-onto-component feature enables you to test parts for long periods without actually handling the test leads. Each prod is connected with solderless, kinkless wire terminating in an insulated banana plug. A removable, nickel-plated phone tip (supplied) fits over the banana plug allowing the individual the option of using meters with either banana or phone tip jacks. Overall leads length is 36 inches. Two unbreakable high dielectric strength prods, black and red.
Part # 470
IC Test Lead Set
Five color-coded, 16" test leads with miniature hook-on prods at both ends. A must for technicians and experimenters who want temporary interconnects with out danger of shorting. Colors are red, black, yellow, green and white.
Part # 500
Deluxe Universal Solderless Test Lead Set
Two 42" flexible, vinyl-covered test leads, heavily insulated to prevent high voltage breakdown and cut-through. 80-strand copper conductors eliminate wire fatigue and assure long life. Each lead is attached to a 4 3/4" probe (1 red and 1 black). Banana plugs on each end have nickel-plated phosphor bronze springs to maintain rigid contact through many thousands of insertions. Heavy plated brass adaptors - color-coded spade lugs large enough for lab instruments (up to 1/4" diameter center post). Test prod phone tips is 0.180" diameter.
Part # SA15
Alligator Clip with Barrel
Standard clip with barrel for banana plug. Solder or crimp connection. Two inch long with jaw opens 3/8".
Display packaged (5) pieces. Add "B" to end of part number for bulk.
Part # 10119
10A Medium Alligator Clips
The most handy size alligator clip ever manufactured.
It has 1001 uses. Length is 1 1/2". Jaw opening is
7/16". Nickel plated steel. Five pack. Add "B" to end of part number for bulk packaging.
Part # 10170
5A Miniature Alligator Clip
These alligator clips are medium size. They can handle current of up to 5A. Length is 1 3/32". Jaw opening is 3/8". Nickel plated steel. Five pack. Add "B" to end of part number for bulk packaging.
Part # 10151
Alligator Clips
Nickel Plated Subminiature Alligator Clips
Part #
10120
267
Description
Nickel plated with screw connection. Strong spring with hard bite.
2" long. No soldering necessary.
Exceptionally small clip ideal for printed circuit and miniature testing. Strong spring for sure grip. Only 7/8" long. Bulk.
Insulated Alligator Clips
Equipped with screw, making it ideal for solderless connection. Overall length 2", plastic insulating sleeve 5/8".
Part #
10120B
10120R
Availability
Bulk, black
Bulk, red
Automotive Alligator Clip - 10 Amp
Red and black insulator (2 3/4" long). Crimp or screw connection. 2 3/32" long with jaw opens 1/2". Available with 1 red and 1 black clip.
Part # 10143
Medium Alligator Clip Insulators
These insulators are intended to be used with 269 or equivalent alligator clips. Length is 1 1/2". Material is PVC.
Part #
10179BK
10179GR
10179RD
10179WH
10179YE
10179BU
Color
Black
Green
Red
White
Yellow
Blue
528
Test & Measurement - Test Leads, Clips & Adapters
Medium Alligator Clip Insulators
(cont.)
These insulators are intended to be used with 10119, 10120,
270, 10170 or equivalent alligator clips. They are the most popular size. Length is 1 15/16". Material is PVC.
Part #
10180BK
10180GR
10180RD
10180WH
10180YE
10180BU
Color
Black
Green
Red
White
Yellow
Blue
Crocodile Clip Insulators
These insulators are designed to work with 10143 or similar clips. They are available in several colors. Length is 2
1/2".
Part #
10190BK
10190BU
10190GR
10190RD
10190WH
10190YE
Color
Black
Blue
Green
Red
White
Yellow
Hook-On Test Prods
Completely insulated. The injector-type prods that firmly clip onto large or small components. Allows meter reading for any required length of time.
Part #
450
4504
4506
450B-BLK
450B-BLU
450B-GRN
450B-RED
450B-WHT
450B-YEL
4504S
4506S
450S
450SB-BLK
450SB-BLU
450SB-GRN
450SB-RED
450SB-WHT
450SB-YEL
Description
Our most popular standard size, 2 1/4" long. Set of two black and red
Set of four - black, red, green and yellow
Set of six - black, blue, green, red, white and yellow
Black, bulk
Blue, bulk
Green, bulk
Red, bulk
White, bulk
Yellow, bulk
Set of four - black, red, green and yellow
Set of six - black, blue, green, red, white and yellow
This mini clip is ideal for those crowded, hard-to-get-at circuits, 1 9/16" long. Set of two - black and red.
Black, bulk
Blue, bulk
Green, bulk
Red, bulk
White, bulk
Yellow, bulk
Automotive Alligator Clip - 20 Amp
Red and black insulator (3 3/32" long). Crimp or screw connection. 2 17/32" long with jaw opens 5/8". Available with 1 red and 1 black clip.
Part # 10144
Economy Alligator Clips - 5 Amp
Red and black insulator (2" long). Crimp or screw connection. 1 11/16" long with jaw opens 3/8". 1 red and 1 black.
Part # 10142
Heavy Duty Alligator Clip - 30 Amp
Red and black insulator (3 3/16" long). Crimp or screw connection. 2 25/32" long with jaw opens 1/2". 1 red and 1 black.
Part # 10145
Insulated Alligator Clip
Red and black molded handle. Screw connection. 2" long with jaw opens 7/16". 1 red and 1 black.
Part # 10125
Miniature Plier-Type Alligator Clip - 15 Amp
Red and black insulator (7/8"). Crimp or solder connection.
2" long with jaw opens 13/16". 1 red and 1 black.
Part # 10139
Plier-Type Alligator Clip - 50 Amp
Red and black insulator (1 3/4" long). Crimp or solder connection. 3-29/32" long with jaw opens 15/16". Display packaged; 1 red and 1 black
Part # 10141
Alligator Clips With Plastic Boots
Strong spring sure-grip nickel plated alligator clips, with snug-fitting insulating plastic boots. (1) each black and red of 268, 269 and 270.
Part # 10121
Miniature Alligator Clip Insulators
These insulators are intended to be used with 268, 10151 or equivalent alligator clips. Length is 1 5/16". Material is PVC.
Part #
10159BK
10159BU
10159GR
10159RD
10159WH
10159YE
Color
Black
Blue
Green
Red
White
Yellow
529
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Multimeters & Accessories
- 8 Clamp Meters
- 11 Tone Testing
- 13 Environmental Testers
- 18 Circuit Voltage Testers
- 20 Insulation Testers
- 21 Audio/Video Testers
- 21 Universal Device Programmers
- 22 Counters & Function Generators
- 23 Oscilloscopes
- 24 Power Supplies
- 26 Specialty & Misc
- 28 Probes & Probe Accessories
- 31 Test Leads, Clips & Adapters