Converters.TV Infrared Learner User Manual
Add to My manuals11 Pages
Converters.TV Infrared Learner is a compact and functional device that allows you to turn analog IR signals into digital data for various control system applications. It features the ability to receive and blast out IR signals, confirming successful learning and ensuring accurate signal transmission. The IR Learner accepts a wide range of IR formats and frequencies, making it compatible with various remote controllers. With simple software installation, you can combine multiple remote controller signals into one desired location for easy control.
advertisement
![Converters.TV Infrared Learner User Manual | Manualzz Converters.TV Infrared Learner User Manual | Manualzz](http://s1.manualzz.com/store/data/070343029_1-df2a56d6d1bcdee7707ba5f80eaf135d-360x466.png)
Infrared Learner
ID
# 15364
Operation Manual
Introduction
The IR Learner is an amazing tool for all your control system design.
This compact yet functional device can turn your analog IR signal into digital and store it for many usages. With simple software tool user can combine all remote controllers signal into one desire place and control all devices through that place. IR Learner does not only learn the IR signal it can also send out the learned signal to prove that it learned was correct. The IR Learner is compliant with nominated produce devices for user’s convenience.
Features
•
•
•
•
•
Receive and blast out IR signal to confirm successful learning
Converting IR signal into digital data for control system usage
Wide range of IR format and IR frequency acceptance
Compact USB dongle design
Simple software installation
Applications
•
•
•
Analog IR signal learning
IR signal transfer into digital data
IR signal blasting
System Requirements
Input remote control with IR signal and output to PC/Laptop.
Operating Functions and Controls Hardware Description
1. USB IN
Connect this port with PC/Laptop for IR signal transferring into data format.
2. Update
Press this button with pin and hold it while plug into PC/Laptop for firmware update. Copy the .bin file to your PC/Laptop in a location where you may use later.
3. IR Receiver
Send the IR signal that is to be learned by press on the remote control in direct line-of-sight towards this port.
4. IR Blaster
This slot can blast out the digital IR signal send from PC/Laptop to confirm the success learning of the received IR signal. Place the IR
Blaster in direct line-of-sight of the equipment to be controlled for.
Software Application and Installation
Installation
Please contact [email protected]
to download the software file named CDPS-IRL-driver.rar and save it in a directory where you may link with the IR Learner.
Connect the IR Learner to PC/Laptop and search it from the Device
Manager.
Click on USB Virtual COM with mouse’s right button and select Update
Driver Software...
Click on Browse for driver software and direct the downloaded software location.
Windows Security will show warning message, click on Install anyway to continue the installation process.
Close the dialogue to finish the installation.
Now the IR Learner will be renamed as IRL Virtual Com Port in the
Device Manager.
Using the IR Learner Application
Now your PC/Laptop has install successful the IR Learner and you may start to use with the IR learner with IR Learning Tool by opening the IRL
Tool from the download file.
Double click on IRL Tool
Select the Com Port according to IRL Virtual Com Port from the Device
Manager and click on Connect.
To start IR signal learning, click on IR Learning and press the remote control with the direct line-of-sight towards the IR Learner’s Receiver lens until the IR code has been learned and show Success from the IRL
Tool.
Then click on IR Emitter with IR Learner’s Blaster in direct line-of-sight towards the remote device to confirm if the learning is correct (or activate).
This IR code/data then may be stored in another control system/application for future usage or may be utilized in many other forms. (Copy the IR code from IR Data box)
Click on IRL Version to see the IRL Tool’s version update status.
Type $HELP to list all the IRL commands and use the command through RS-232 to control the IR Learning Tool. To clear the message in message box simply click on Clear MSG.
Connection
Diagram
Specifications
Input Port
Output port
IR Frequency
IR Input Signal Distance
IR Blaster Out Distance
ESD Protection
Dimensions
Weight
Chassis Material
Silkscreen Color
Operating Temperature
Storage temperature
Relative Humidity
1 x IR
1 x IR
1 x USB
20~60kHz
Up to 1M
Up to 10M
Human Body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
85.5mm (W) x 25mm (D) x 12mm (H)
14g
Plastic
Black
0 ̊C ~ 40 ̊C / 32 ̊F ~ 104 ̊F
-20 ̊C ~ 60 ̊C / -4 ̊F ~ 140 ̊F
20~90% RH (no condensation)
advertisement
Related manuals
advertisement