May Wes QD2 Assembly Instructions

QD2 TOOLBAR MOUNT STALK STOMPER
ASSEMBLY INSTRUCTIONS / PARTS LISTING
1.1
1.2
2.7
43000
2.1
QD2 TOOLBAR MOUNT
STALK STOMPER ASSEMBLY
1.3
2.8
2.9
1.4
2.11
2.6
2.12
3
2.3
2.5
1
2.4
2
2.10
Notes:
2.2
ITEM #
PART #
DESCRIPTION
QTY
1
43001
TOOLBAR MOUNT BRACKET ASSY
1
1.1
43002
TOOLBAR MOUNT BRACKET
1
1.1.3
24022
LOCK PLATE
1
1.2
00986
U-BOLT 1/2"-13
2
1.3
00255
WASHER, 1/2" SPRING LOCK
4
1.4
00214
NUT, 1/2"-13 HEX
4
2
43003
STALK STOMPER ASSY 9"
1
2.1
43004
SHOE BRACKET ASSY
1
2.2
41825
STALK STOMPER SHOE W/POLY 9"
1
2.3
01040
SPRING
1
2.4
00691
PIN, 1/4" X 3" COTTER
1
2.5
00931
CHAIN
1
2.6
01001
BOLT, CUSTOM (GREASEABLE)
1
2.7
00213
NUT, 7/16"-14 HEX TOP LOCK
1
2.8
00249
WASHER, 3/8" FLAT
2
2.9
00104
BOLT, 3/8"-16 X 1" HEX
2
1
43016 - 14" Stalk Stomper Shoe Assy
2
41748 - 14" Stalk Stomper Shoe W/Poly
2.10
00209
NUT, 3/8"-16 HEX
2
3
Install Self-Tapping Grease Fitting into end of Pivot Bolt
Torque grease fitting to 65-70 inch pounds. DO NOT OVERTIGHTEN!
2.11
01009
GREASE FITTING, 1/4"-28 STRAIGHT
1
2.12
01046
CHAIN SLEEVE
1
120 Eastgate Drive SE
PO Box 7
Hutchinson, MN 55350
PAGE 1 OF 5
1-800-788-6483
1-320-587-2322
1-320-587-6112 (Fax)
WWW.MAYWES.COM
Doc #: 10213_B
TOOLBAR MOUNT STALK STOMPER
ASSEMBLY INSTRUCTIONS / PARTS LISTING
41827
TOOLBAR SPLICE
6
41834
VERTICAL BRACKET
ASSEMBLY
1
5
7
8
4
2
ITEM #
1
2
3
4
3
PART #
41783
00986
00255
00214
DESCRIPTION
VERTICAL BRACKET
U-BOLT 1/2"-13
WASHER, 1/2" SPRING LOCK
NUT, 1/2"-13 HEX
QTY
1
2
4
4
120 Eastgate Drive SE
PO Box 7
Hutchinson, MN 55350
PAGE 2 OF 5
ITEM #
5
6
7
8
PART #
22341
00986
00255
00214
DESCRIPTION
SPLICE PLATE
U-BOLT 1/2"-13
WASHER, 1/2" SPRING LOCK
NUT, 1/2"-13 HEX
QTY
1
4
8
8
Items 9 and 10 listed below (but not shown) are not
included in all kits, please order individually if needed.
ITEM #
9
10
PART #
41672
41673
DESCRIPTION
72" TOOLBAR (2" X 2")
102" TOOLBAR (2" X 2")
1-800-788-6483
1-320-587-2322
1-320-587-6112 (Fax)
QTY
VARIES
VARIES
WWW.MAYWES.COM
Doc #: 10213_B
QD2 TOOLBAR MOUNT STALK STOMPER
ASSEMBLY/INSTALLATION INSTRUCTIONS
Vertical Bracket
Mount Bracket
Toolbar
Toolbar Splice
Stalk Stomper Assy
Assembly/Installation Procedure:
- Insert Vertical Brackets into Header Brackets and secure with Hitch Pin.
- Fasten Toolbar to Vertical Brackets using supplied U-Bolts, Lock Washers
and Nuts.
Note: If kit was purchased with Toolbar included, Toolbar may need to
be trimmed to fit.
- Fasten Mount Brackets to Toolbar using supplied U-Bolts,
Lock Washers and Nuts on center of the rows to be stomped.
- Install Stalk Stomper Assy into mating features in the Mount Bracket.
Pull Stalk Stomper Assy back until lock pin assembly snaps into place.
- When applicable
Fasten Toolbars together using the Toolbar Splice (not included in all kits).
120 Eastgate Drive SE
PO Box 7
Hutchinson, MN 55350
PAGE 3 OF 5
1-800-788-6483
1-320-587-2322
1-320-587-6112 (Fax)
WWW.MAYWES.COM
Doc #: 10213_B
QD2 TOOLBAR MOUNT STALK STOMPER
TRANSPORT POSITION
Flip-Up Transport Position
Flip-Up Transport Position (Toolbar Mount Only):
1) Pull down on Lock Pin Assembly to release Stalk Stomper Shoe
2) Place front mounting pin in upright position
3) Pull up until Lock Pin Assembly snaps into place
120 Eastgate Drive SE
PO Box 7
Hutchinson, MN 55350
PAGE 4 OF 5
1-800-788-6483
1-320-587-2322
1-320-587-6112 (Fax)
WWW.MAYWES.COM
Doc #: 10213_B
QD2 TOOLBAR MOUNT STALK STOMPER
OPTIONAL SETUPS
Offsetting Toolbars
If necessary, the Toolbars may be offset in
any direction by positioning Toolbars on
opposite sides of the Toolbar Splice as
shown below.
Overlapping Brackets
If necessary, Mount Brackets and
Vertical Brackets can be overlapped
in multiple positions to allow the Stalk
Stomper Assy to be positioned on center
of the row. Replace U-Bolts with
1/2"-13 x 4" Hex Bolts (not supplied)
as shown on the left.
120 Eastgate Drive SE
PO Box 7
Hutchinson, MN 55350
PAGE 5 OF 5
Toolbar Splice Orientation
The Toolbar Splice Plate can be postioned on the
bottom, top, front or back (shown below) of the
Toolbars to provide the most rigidity per individual
setup.
1-800-788-6483
1-320-587-2322
1-320-587-6112 (Fax)
WWW.MAYWES.COM
Doc #: 10213_B