How do I change the ADF rollers for Canon i-sense m237?
1. Turn off the printer and unplug the power cord. This will ensure that you are safe from any electric shocks while working on the printer.
2. Open the ADF cover and remove any paper that may be inside. This will give you easy access to the ADF rollers.
3. Locate the ADF roller on the left side of the printer, and press the tab on the bottom of the roller to release it from the printer. The tab is located towards the bottom of the roller and you should be able to press it with your thumb.
4. Take the new ADF roller and insert it into the printer, making sure it clicks into place. The new roller should click into place easily, and you should be able to feel and hear it lock into position.
5. Repeat the process for the ADF roller on the right side of the printer. Make sure that you follow the same steps for the right side as you did for the left side.
6. Close the ADF cover and plug the printer back in. This will ensure that the printer is ready to be turned back on.
7. Turn the printer back on and test the ADF to ensure that it is working properly. You can test the ADF by trying to scan a document through it. If the rollers are working properly, the paper should feed through smoothly.
8. It's important to follow the instructions carefully and if you have any doubts or difficulties, consult the printer's user manual or contact the manufacturer for assistance. Always seek help if needed to ensure that your printer is working properly.
