Traceable 1066 Lab Timers, Stopwatches & Clock Instruction manual
The Traceable 1066 is a versatile digital alarm clock that provides accurate timekeeping and a range of useful features. It includes an LCD display with backlight for easy visibility, and a dual alarm system with snooze function for gentle wake-ups. The calendar function displays the current date, day of the week, and month. It also features an automatic daylight saving time adjustment and a night light function with an on/off switch for added convenience in low-light conditions.
PDF
Dokumentti
Mainos
Mainos
SNOOZE/LIGHT • Press SNOOZE/LIGHT key once to turn on back-light for 5 seconds. • When unit is alarming, press it to snooze alarm. PRODUCT DESCRIPTION 1. LCD display 2. CLOCK key 3. ALARM key 4. ALARM ON/OFF switch 5. DOWN key 6. UP key ALARM TIME SETTING 1. In normal mode, press and hold ALARM key for 2 seconds until Hour digit flashes. 2. Press UP or DOWN key to set the desired value, press and hold UP or DOWN key to speed up the setting. 3. Press ALARM key again until Minute digit flashes and press UP or DOWN key to change its value. 4. Press ALARM key again to save and exit the setting, or let it exit automatically 30 seconds later without pressing any key. Minute digit flashes and press UP or DOWN key to change its value. NIGHT LIGHT FUNCTION ON/OFF SWITCH Slide it to ON position to turn on the night light, that the back-light will turn on automatically when the light-sensor can not sense light in dark environment. DAYLIGHTSlide SAVING TIME (DST)to turn off the night light function. it to OFF position SNOOZE/LIGHT keyThe clock has been programmed to automatically switch RCC KEY RESET key when the daylight saving time is in effect. Your clock will Press it to the switch between Celsius and Fahrenheit. show “DST” during summer. RCC key Press and hold it for 3 seconds to receive the RC signal NIGHT LIGHT SIGNAL STRENGTH INDICATOR for reception testing. FUNCTION ON/OFF The signalRESET indicator displays signal strength in 4 levels. switch KEY flashing means time signals are being 11. Battery compartmentWave segment Press it to set all values to default values. In case of 7. 8. 9. 10. A larm t ime set t ing mode Hour set t ing M inut e set t ing USING ALARM SNOOZE FUNCTION USING ALARM ANDAND SNOOZE FUNCTION Slide ALARM turn 1. Slide ALARMON/OFF ON/OFFswitch switchtoto ON ON position position tototurn on on thethe alarm, with displayedon on alarm, withthe thealarm alarmicon icon ““ ”” displayed thethe LCD. LCD. received. The signal quality could be classified into 4 types: 2. Slide ALARM ON/OFF switch to OFF position to turn malfunction, the unit may be required to reset. 2. Slide ALARM ON/OFF switch to OFF position to turn off the alarm. off the DAYLIGHT SAVING TIME (DST) 3. When it isalarm. sounding,press SNOOZE/LIGHT to stop No signal quality Weak signal quality 3. When it isalarm sounding,press to stop the current and enterSNOOZE/LIGHT the snooze mode,with The clock has been programmed DAYLIGHT SAVING TIME (DST) to automatically switch current alarm and enterOrthethe snooze mode,with the thethe alarm icon flashing. sound will stop when the daylight saving time is in effect. Your clock will The clock been programmed to automatically switch Acceptable signalhas quality Excellent signal quality automatically one minute later. alarm icon flashing. Or the sound will stop automatishow the “DST” duringsaving the summer. when daylight time is in effect. Your clock will 4. Once function is activated, the 4 step callythe onesnooze minute later. “DST” during thesuccessfully, summer. If the RC show clock receives signal crescendo will sound 5 times the in 5-minute SIGNAL STRENGTH INDICATOR a sync-time 4.USING Once ALARM the alarm snooze function is activated, 4 step cresymbol “ ” will appear on the LCD. The unit has already LCD AND SNOOZE FUNCTION duration is 60 seconds. interval. The alarm SIGNAL STRENGTH INDICATOR Thetime signal indicator displays signal strength in 4 levels. scendo alarm will sound 5 times in 5-minute interval. received the signal. Otherwise the signal strength 1. Time 6. Temperature 1. Slide ALARM ON/OFF switch to ON position to turn Wave segment flashing means time signals areinbeing symbol willThe disappear from thedisplays LCD display. signal indicator signal strength 4 levels. BATTERY REPLACEMENT The alarm duration is 60 seconds. on the alarm, with the alarm icon “ ” displayed on 2. AM/PM 7. Signal strength Wave segment flashing means signals into are4being received. The signal quality could time be classified the becomes LCD. When the LCD dim, replace with 2 new AA size Note 3. Month indication ALL OPERATIONAL DIFFICULTIES received. The signal quality could be classified into 4 types: types: DAYLIGHT SAVING TIME (DST) 2. at once. Slide ALARM ON/OFF to OFF position to turn batteries Pay attention to switch the battery polarity. 4. Date 8. Daylight saving time You may usehasthe button to receive The clock been“RCC” programmed to automatically switch the time signal If this clock does not function properly for any reason, off the alarm. when the daylight saving time is in effect. Your clock will manually. The during unit the will exist the receive mode automatically 5. Day of the week 9. Time zone map Note replace the battery with a new highSNOOZE/LIGHT quality battery (see show “DST” 3. When it is sounding,press to stop No summer. signal quality Weak signal quality after 6-12 minutes. USINGbattery ALARM AND SNOOZE FUNCTION the current alarm and enterunit the or snooze mode,with SIGNAL STRENGTH Receive INDICATOR mode consumes more Attention! Please dispose of the used batteries in the “Battery Replacement” section). Low battery power 1. Slide ALARM ON/OFF switch to ON position to turn powerThe that may reduce lifetime. ALARM TIME MODE thesafe alarm icon flashing. Or the sound will stop signal indicator displays battery signal strength in 4 levels. an“ ecologically manner. on the alarm, with the alarm icon ” displayed on can occasionally cause any number of “apparent” Wave segment flashing means time signals are being Acceptable signal quality Excellent signal the LCD.quality automatically one minute later. 1. Alarm time The signal quality couldSETTING be classified into 4 types: TIME received. AND CALENDAR 2. Slide ALARM ON/OFF switch to OFF position operational Replacing withthe a new 4. to turnOncedifficulties. the snooze functionthe is battery activated, 4 step off the alarm. SUGGESTION 2. AM/PM the RC receives signal successfully, ait issync-time 3. When sounding,press SNOOZE/LIGHT to stop If the clockIfNo notclock receive the time signal successfully, fresh battery will solve most difficulties. Ifdoes the clock receives signal successfully, crescendo alarm will sound 5 times in 5-minute signalradio-controlled quality Weak signal quality the current alarm and enter the snooze mode,with symbol “ ” will appear on the LCD. The unit has already 3. Alarm icon Make sure you read The the instructions before alarm duration is 60operating seconds. this interval. you can seta the time manually. soon as the transmitter the alarm icon flashing. Or the sound will stop sync-time “ As” will appear onthe LCD. Otherwise, received thesymbol time signal. Otherwise signal strength Acceptable signal quality Excellent quality BATTERY automatically one minute later.delicate clock. REPLACEMENT We have developed this sophisticated is received again, the clock willsignal automatically synchronize 4. Once the snooze function is activated, the 4 step signal strength symbol will disappear from the LCD symbol will disappear from the LCD display. BATTERY If the RC clock receives signal successfully, a sync-time performance; however, for theREPLACEMENT best reception CLOCK BUTTON readings, a faint display, no display, or a battery crescendo alarm will soundinstrument 5 times Erratic in 5-minute with the received time. symbol “display. ” will appear on the LCD. The unit has already interval. The alarm duration is 60 seconds. the signal transmitted from USA Atomic Clock When the LCD becomes dim, replace withtransmitter 2 new received the time signal. Otherwise the signal strength 1. In normal time mode, press and hold CLOCK for 2 1. symbol appearing on the display are all indications that AA the size Note In normal timefrom mode, key for symbol will disappear the LCDpress display. and hold CLOCK BATTERY REPLACEMENT will be affected situations. We you polarity. to note batteries in at certain once. Pay attention to advise the battery NOTE: Use the “RCC” button totoreceive time signal seconds to enter normal time setting. batteries the LCD becomes dim, replace with 2 new AA size must be replaced. Remove the battery cover locat2Note seconds until the zone digit flashes . When You may use theTime “RCC” button receive the time signal the following instructions: batteries at once. Pay attention to the battery polarity. You may use the or “RCC” button to receive the time signal manually. The unit will exist receive mode automatically manually. Unit will exitto receive mode automatically 2. In setting mode, press CLOCK to set time. Use UP or2. Press UP DOWN key setthe the desired value of after Note ed the backrecommended of the unit. Remove the exhausted 1. It isonstrongly to start this clock batteries at night manually. The unit will exist the receive mode automatically Note after 6-12 minutes. Receive mode consumes more battery the flashing digit,mode press and hold UP or DOWN keydispose of the used unit orand 6-12 minutes. Receive mode consumes morePlease battery after 6-12 minutes. Receive consumes more battery DOWN keys to increase or decrease values. Attention! Please the used unit or batteries in replace withdispose two (2) of new AA alkaline batteries. Attention! batteries and letin thethem clock receive the signal automatically power that may reduce battery lifetime. power that may reduce battery lifetime. to speed themay setting. powerupthat reduce battery lifetime.an ecologically safe manner. an ecologically safe manner. 3. After setting, press CLOCK for 2 seconds to save during midnight. Insert the new batteries with the proper polarity as indicated TIME AND CALENDAR SETTING 3. Press CLOCK key again until the SUGGESTION next digit time setting. 2. Always place the unitbattery away compartment. from interfering sources TIME CALENDAR SETTING If the clock doesAND not receive the time signal successfully, by the illustration in the Replace the TIME AND CALENDAR SETTING Make you read the instructions before operating this flashes.press UP orAsDOWN to change itssure value. you can set the time manually. soon as the key transmitter SUGGESTION such as TV set, computer, etc. delicate clock. We have developed this sophisticated is received again, the clock will automatically synchronize signal successfully, IfIf the clock does not receive the time battery cover. ALARM BUTTON 4. Repeat above operations to set the time and calendar clock does not receive time signal successfully, you performance; however, instrument for the best reception with the received time. Makeplacing sure youthe read beforeplates. operating this 3. Avoid unitthe oninstructions or next to metal you can set the time manually. As soontheas the transmitter signal transmitted from USA Atomic Clock transmitter in order: 1. this In can normal time the mode,time press and hold CLOCKAs keysoon for set manually. as signal is received, 1. In normal time mode, press ALARM to display alarm will be affected in certain situations. 4. We adviseClosed you to note areas delicate clock. We have developed sophisticated such aswill airport, basement, tower block, received clock will automatically synchronize Replacing the batteries reset all settingsthis to default 2is seconds until the again, Time zonethe digit flashes . the following instructions: Time zone >DOWN Year > Date > Hourrecommended to start this clock 2. Press UP or key> to Month set the desired value of> 12/24-hr instrument fornot therecommended. best reception performance; however, clock will automatically with time. or factory are 1. received It is stronglytime. at night with the received time. synchronize values. the flashing digit, press and hold UP or DOWN key and let the clock receive the signal automatically thenot signal transmitted USA Atomic Clocksuch transmitter > Minute > the Second > Language(WWVB version) Do start receptionfrom in moving vehicles as to speed up setting. 2. Press and hold ALARM for 2 seconds to enter alarm during midnight. 1. In normal time mode, press and hold CLOCK key for 5. 1.the In normal time mode, press and CLOCK keythe for 3. Press CLOCK key again until the next digit will be situations. Weunit advise you to note CLOCK key to save and exit hold the2. setting, or Always place unit away from interfering sources cars or affected trains. Warning: Changesinorcertain modifications to this not expressly time setting. Use UP or DOWN keys to increase or 5 . Press flashes.press UP or DOWN until key to change its value. 2 seconds the Time zone digit flashes . as TV set, computer, etc. such following instructions: 2above seconds thetime Time zone flashes let it exit automatically 30 later without the unit on or next to metalthe 4. Repeat operationsuntil to set the andseconds calendar 3. desired Avoid placing plates. approved by the party responsible for compliance could void Press UP or DOWN key to set the value of decrease values. in2. this order: 1. block,It is strongly recommended to start this clock at night 4. Closed areas such as airport, basement, tower pressing any key. 2. Press UP or DOWN key to and set desired value ofarethe Time zonethe > Yearflashing > Month > Date > 12/24-hr > Hour digit, press hold UP or DOWN key or factory not recommended. the user’s authority operate the equipment. 3. After setting, press ALARM again to save setting and let thetoclock receive the signal automatically > Minute > Second > Language(WWVB version) 5. Do not start reception in moving vehicles such as flashing digit, and hold UP or DOWN key to to speed uppress theexitsetting. 5 . Press the CLOCK key to save and the setting, or cars or trains. during midnight. values. let automatically 30 setting. seconds key later without 3.it exit Press CLOCK again until the next digit Warning: speed up the NOTE: This equipment has been tested and found to comply Changes or modifications to this unitinterfering not expressly 2. Always place the unit away from sources pressing any key. flashes.press UPagain or DOWN keynext to change its value. approved ALARM ON / OFF SWITCH party responsible for compliance could void the 3. Press CLOCK key until the digit flashes. withby thethe limits forTV a Class B digital device, to Part such as set, computer, etc. pursuant 4. Repeat above operations to set the timeChanges and calendar Warning: or modifications touser's this unit not expressly to operate the equipment. authority 3.of Avoid placing the unit onare or next to metal plates. press UP or DOWN key to change its value. 1. Slide ALARM ON/OFF switch to turn on/off the alarm. FCC Rules. These limits designed to provide approved by the party responsible for compliance 15 could voidthe the in this order: NOTE: This equipment has been tested and found to comply with to operate the equipment. 4. Closed areas such asharmful airport,interference basement, tower block, 4. Repeat above operations to set the user's timeauthority and calendar NOTE: This equipment has been tested the and found to comply reasonable protection against in aof the limits forwith a Class B digital device, pursuant to Part 15 DOWN KEY Time zone > Year > Month > Datethe>limits 12/24-hr Hour for a Class B>digital device, pursuant to Part 15 of the or factory are not recommended. in >this order:> Second > Language(WWVB FCC Rules. These limits are designedFCC to provide reasonable Rules. These limits are designed to generates, provide reasonable residential installation. This equipment uses and Minute version) protection against harmful interference in a residential5. installation. Do not startinterference reception in in amoving vehicles such as In setting mode, press to decrease setting value. against harmful residential installation. This equipment generates, radiate radio frequency zone Year > Month Dateand >energy 12/24-hr > installed Houruses >orandusedcanprotection 5 . Time Press the>CLOCK key to >save exit the setting, canwith radiate radio frequency energy if not installed and cars or trains. and, if not and in accordance the Press and hold it to speed up the setting. ALARM TIME SETTING This equipment generates, uses and can and, radiate radio frequency instructions, may cause harmful interference to radio communicaMinute > Second > Language(WWVB version) let it exit automatically 30 seconds later without 1. In normal mode,press and hold ALARM key for 2 used withand the instructions, may causewith harmful tions. However, there is no guarantee energy that interference willinnot and, ifaccordance not installed used in accordance the ALARM TIME SETTING seconds until Hour digit flashes. occur in a particular installation. If this equipment does cause pressing any key. UP KEY 5. Press CLOCK key to save and exit the setting, or let cause harmful interference to radio communicaharmful interference to radio or televisioninstructions, reception,interference which canmay be 2. Press UP or DOWN key to set the desired value, to radio communications. However, there is no determined by turning the equipment off and on, the user is 1. In normal mode,press and hold ALARM key for 2 press and hold automatically UP or DOWN key to 30 speed up the tions. However, there is no guarantee that interference will not In setting mode, press to increase setting value. it exit seconds laterencouraged without pressing to try to correct the interference by one or more of the setting. that interference not occur in a particular inseconds untilkeyHour digit flashes. following measures: occur guarantee in a particular installation. will If this equipment does cause 3 . Press ALARM until Minute digit flashes.and Warning: Changes or modifications to this unit not expressly Press and hold it to speed up the setting. any key.again – Reorient or relocate the receiving antenna. press UP or DOWN key to change its value. interference to radio or television for reception, which canvoid be the 2. Press UP or DOWN key to set the desired value, – Increase the separation between the harmful equipment and receiver. approved by the party responsible compliance could 4 . Press ALARM key again to save and exit the setting, – Connect the equipment into an outlet determined on a circuit different from turningtothe equipment off and on, the user is press hold UP 30orseconds DOWN key to speed up thethe user'sbyauthority operate the equipment. or letand it exit automatically later without that to which receiver is connected. 1. A larm t ime set t ing mode A larm t ime set t ing mode Time zone set t ing(W W VB version only) Normal t ime mode Normal t ime mode Time zone set t ing(W W VB version only) Year set t ing Language set t ing Second set t ing M inut e set t ing Language set t ing Second set t ing Normal t ime mode pressing any key. Year set t ing M ont h set t ing Hour set t ing M inut e set t ing Time zone set t ing(W W VB version only) M ont h set t ing Hour set t ing Hour set t ing M inut e set t ing M inut e set t ing Dat e set t ing Dat e set t ing 12/ 24 Hr set t ing Hour set t ing Year set t ing 12/ 24 Hr M ont h set t ing set t ing Dat e set t ing encouraged to try to correct the interference by one or more of the – Consult the dealer or an experienced radio/ TV technician for stallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. WARRANTY, SERVICE, OR RECALIBRATION For warranty, service, or recalibration, contact: TRACEABLE® PRODUCTS 12554 Galveston Rd. Suite B230 Webster, Texas 77598 USA Ph. 281 482-1714 • Fax 281 482-9448 E-mail [email protected] www.traceable.com Traceable® Products are ISO 9001:2018 QualityCertified by DNV and ISO/IEC 17025:2017 accredited as a Calibration Laboratory by A2LA. Cat. No. 1066 Traceable® is a registered trademark of Cole-Parmer. ©2020 Traceable® Products. 92-1066-00 Rev. 0 052820 TRACEABLE ® RADIO-CONTROLLED ATOMIC CLOCK WITH TEMPERATURE INSTRUCTIONS ">
/
Lataa
Ystävällinen muistutus. Voit tarkastella dokumenttia täällä. Mutta mikä tärkeintä, tekoälymme on jo lukenut sen. Se voi selittää monimutkaisia asioita yksinkertaisesti, vastata kysymyksiisi millä tahansa kielellä ja auttaa sinua navigoimaan nopeasti jopa pisimmissä tai monimutkaisimmissa dokumenteissa.
Julkinen linkki päivitetty
Chattisi julkinen linkki on päivitetty. You may view and manage your chat links after registration here.
Dokumentin julkinen linkki
Mainos
