SmartDesign MSS
AHB Bus Matrix Configuration
Libero® IDE Software
Table of Contents
Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A Product Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Contacting the Customer Technical Support Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Non-Technical Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
R e v i s i o n 1 2
Configuration Options
The SmartFusion Microcontroller Subsystem AHB Bus Matrix is highly configurable.
The MSS AHB Bus Matrix configurator enables you to define only a sub-set of the bus matrix configurations. The options defined in the configurator are likely to be static for a given application and - when set in the configurator - will be automatically configured in the SmartFusion device by the Actel
System Boot. Other configurable options such as eNVM and eSRAM remapping are more likely to be run-time configurations and are not available in this configurator.
In this document we provide a brief description of these options. For more details please refer to the Actel
SmartFusion Microcontroller Subsystem User's Guide .
Configuration Options
Arbitration
Slave Arbitration Algorithm. Each of the slave interfaces contains an arbiter. The arbiter has two modes of operation: (pure) round robin and weighted round robin (as shown in
Figure 1
). The arbitration scheme selected is applied to all slave interfaces. It should be noted that the user can override the arbitration scheme dynamically in their run-time code on the fly.
Security - Port Access
Each of the non-Cortex-M3 masters connected to the AHB bus matrix can be blocked from accessing any of the slave ports connected to the bus matrix. The Fabric Master, Ethernet MAC and Peripheral
DMA ports can be blocked by checking the corresponding check-box in this configurator. Note that in the case of the fabric master, access is further qualified by the restricted region options described below.
Security - Soft Processor Memory Access
Restrict Memory Access
• Disabling this option allows any soft processor (or fabric master) to access any location in the
Cortex-M3 memory map.
• Enabling this option prevents any soft processor (or fabric master) to access any location in the
Cortex-M3 memory map defined by the Restricted Memory Region.
Restricted Memory Region Size - This option defines the size of the restricted memory region to the fabric master.
R e v i s i o n 1 3
Port Description
Restricted Memory Region Address This option defines the base address of the restricted memory region. This address should be aligned with the chosen restricted memory region size.
4
Figure 1 • MSS AHB Bus Matrix Configurator
Port Description
Table 1 • Cortex-M3 Port Description
Port Name
RXEV
TXEV
SLEEP
DEEPSLEEP
Direction
IN
OUT
OUT
OUT
PAD?
Description
No Causes the Cortex-M3 to wake up from a WFE (wait for event) instruction. The event input, RXEV, is registered even when not waiting for an event, and so affects the next WFE.
No Event transmitted as a result of a Cortex-M3 SEV (send event) instruction.
This is a single-cycle pulse equal to 1 FCLK period.
No This signal is asserted when the Cortex-M3 is in sleep now or sleep-on-exit mode, and indicates that the clock to the processor can be stopped.
No This signal is asserted when the Cortex-M3 is in sleep now or sleep-on-exit mode when the SLEEPDEEP bit of the System Control Register is set.
R e v i s i o n 1
A – Product Support
The Microsemi SoC Products Group backs its products with various support services including a
Customer Technical Support Center and Non-Technical Customer Service. This appendix contains information about contacting the SoC Products Group and using these support services.
Contacting the Customer Technical Support Center
Microsemi staffs its Customer Technical Support Center with highly skilled engineers who can help answer your hardware, software, and design questions. The Customer Technical Support Center spends a great deal of time creating application notes and answers to FAQs. So, before you contact us, please visit our online resources. It is very likely we have already answered your questions.
Technical Support
Microsemi customers can receive technical support on Microsemi SoC products by calling Technical
Support Hotline anytime Monday through Friday. Customers also have the option to interactively submit and track cases online at My Cases or submit questions through email anytime during the week.
Web: www.actel.com/mycases
Phone (North America): 1.800.262.1060
Phone (International): +1 650.318.4460
Email: [email protected]
ITAR Technical Support
Microsemi customers can receive ITAR technical support on Microsemi SoC products by calling ITAR
Technical Support Hotline: Monday through Friday, from 9 AM to 6 PM Pacific Time. Customers also have the option to interactively submit and track cases online at My Cases or submit questions through email anytime during the week.
Web: www.actel.com/mycases
Phone (North America): 1.888.988.ITAR
Phone (International): +1 650.318.4900
Email: [email protected]
Non-Technical Customer Service
Contact Customer Service for non-technical product support, such as product pricing, product upgrades, update information, order status, and authorization.
Microsemi’s customer service representatives are available Monday through Friday, from 8 AM to 5 PM
Pacific Time, to answer non-technical questions.
Phone: +1 650.318.2470
R e v i s i o n 1 5
Microsemi Corporation (NASDAQ: MSCC) offers the industry’s most comprehensive portfolio of semiconductor technology.
Committed to solving the most critical system challenges, Microsemi’s products include high-performance, high-reliability analog and RF devices, mixed signal integrated circuits, FPGAs and customizable SoCs, and complete subsystems. Microsemi serves leading system manufacturers around the world in the defense, security, aerospace, enterprise, commercial, and industrial markets. Learn more at www.microsemi.com
.
Corporate Headquarters
Microsemi Corporation
2381 Morse Avenue
Irvine, CA
92614-6233
USA
Phone 949-221-7100
Fax 949-756-0308
SoC Products Group
2061 Stierlin Court
Mountain View, CA
94043-4655
USA
Phone 650.318.4200
Fax 650.318.4600
www.actel.com
SoC Products Group (Europe)
River Court, Meadows Business Park
Station Approach, Blackwatery
Camberley Surrey GU17 9AB
United Kingdom
Phone +44 (0) 1276 609 300
Fax +44 (0) 1276 607 540
SoC Products Group (Japan)
EXOS Ebisu Building 4F
1-24-14 Ebisu Shibuya-ku
Tokyo 150 Japan
Phone +81.03.3445.7671
Fax +81.03.3445.7668
SoC Products Group (Hong Kong)
Room 2107, China Resources Building
26 Harbour Road
Wanchai, Hong Kong
Phone +852 2185 6460
Fax +852 2185 6488
© 2010 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners.
5-02-00233-0/06.10
