Percussion Play Congas Installation Instructions

Installation Instructions
1. Attach the steel leg to each
of the congas with the
M10x50 security screws,
square washers and PU
mounts. (1.1) (See Assembly
Guide)
Surface Fixed
1.5m
1.5m
Install Instrument
with 1.5m free space
(from widest point)
around it.
2. Attach Surface Fixing posts
to legs(1.2) (See Ground Fix
Post Installation Sheet)
Congas
Page 1 of 2
Instrument
Components:
3.Locate Plate in desired
location and mark holes to fix
to desired surface.
(1.1)
x4
Small – 850mm
Medium – 850mm
Large- 850mm
850mm
from Plate
M10x50 Security Screw
4. Fix to Surface using
recommended ground
anchors not supplied
x4
M10x50x3 Square washer
(1.2)
x2
PU 200 Mount
5. Make sure all fixings are
covered and secure using
cover caps provided
x2
PU 250 Mount
Metric
Conversion:
178mm/ 7”
850mm/ 33”
1.5m/ 59”
Weight of heaviest part 3.8kg (Large drum Small Congas)
Ground Surface
Weight of heaviest part 4.5kg (Large drum Medium Congas)
Weight of heaviest part 5.2kg (Large drum Large Congas)
BS EN 1176
Played with hands
Surface Fix
x1
Components: M10x70 Security Screw
x1
M10 Barrel Nut
x4
2 Part Cover Cap
Ground Anchors
not supplied
Spares available from
percussionplay.com or from your
local distributor
14.8 Kg
15 Kg
20 Kg
Assembly Guide PPCONG
Tools:
x2
TX 45 Driver Bit
PPCONG PLAN
Surface Fixed
Thread Lock Solution
Congas
Page 2 of 2
Required (Not Supplied)
COMPONENTS LIST:
(1.1)
Instrument
Components:
M10x30 Pin
torx Screw
X4
M10x50
Security
X4
M10x50x3 square washer X4
x4
M10x50 Security Screw
PU MOUNT 200 X2
x4
M10x50x3 Square washer
PU MOUNT 250 X2
x2
200 Mount
M10x70 Pin torx X1
Thread Lock Solution
M10 Barrel Nut Pin torx X1
Required (Not Supplied)
x2
250 Mount
PPCONG FRONT
BS EN 1176
Played with hands
Surface Fix
x1
Components: M10x70 Security Screw
PPCONG SIDE
x1
M10 Barrel Nut
x4
2 Part Cover Cap
Ground Anchors
not supplied
Spares available from
percussionplay.com or from your
local distributor
14.8 Kg
15 Kg
20 Kg