advertisement
![Percussion Play Duo Installation Instructions | Manualzz Percussion Play Duo Installation Instructions | Manualzz](http://s1.manualzz.com/store/data/070877155_1-9812604d5c6353f94e258135ebd87fcb-360x466.png)
Instrument
Components: x8
M8 Nyloc Nut x4
M6x20 Security Screw x8
2 Part Cover
Cap x2
M6 Saddle Strap
Metric
Conversion:
178mm/ 7”
232mm/ 9”
750mm/ 29 1 /
2
850mm/ 33”
1.5m/ 59”
”
Surface Fixed
Duo
Page 1 of 3
Installation Instructions
1. Attach the steel legs to the base of the instrument with the M8 Nyloc Nuts and 2 part security caps. (1.1) (See
Assembly Guide)
2. Attach Surface Fixing posts to legs(1.2) (See Ground Fix
Post Installation Sheet)
1.5m
1.5m
Install Instrument with 1.5m free space
(from widest point) around it.
3.Locate Plate in desired location and mark holes to fix to desired surface.
(1.1)
(1.2)
4. Fix to Surface using recommended ground anchors not supplied
(1.3) 850mm from Plate
5. Make sure all fixings are covered and secure using cover caps provided
Ground Surface
Weight of heaviest part 14kg (Duo)
Pair Small Red
Beaters X2
6. Attach the 1 pair of beater to the saddle strap on each leg. (1.3)
(1.3)
Surface Fix
Components: x2
M10x70 Security Screw x2
M10 Barrel Nut x8
2 Part Cover Cap
Ground Anchors not supplied
Spares available from percussionplay.com or from your local distributor
28 Kg
BS EN 1176
Surface Fixed
Duo
Page 2 of 3
Instrument
Components: x8
M8 Nyloc Nut x4
M6x20 Security Screw x8
2 Part Cover
Cap x2
M6 Saddle Strap
Thread Lock Solution
Required (Not Supplied)
BS EN 1176
Assembly Guide PPDUO
Tools: x1
TX 30 Driver Bit x2
TX 45 Driver Bit
750
Post
Centres
(1.1)
Thread Lock Solution
Required (Not Supplied)
232
COMPONENTS LIST:
2 Part Cover Cap X8
M8 Nyloc nut X8
M10 Nut X8
M10x200 Threaded Bar X4
Saddle Strap X2
M6x20 Pin torx X4
M10x70 Pin torx X2
M10 Barrel Nut Pin torx X2
PPDUO FRONT PPDUO SIDE
Pair Small Red
Beaters X2
Surface Fix
Components: x2
M10x70 Security Screw x2
M10 Barrel Nut x8
2 Part Cover Cap
Ground Anchors not supplied
Spares available from percussionplay.com or from your local distributor
28 Kg
Surface Fix Post Installation
Surface Fixed
Duo
Page 3 of 3
1 2
(1.1)
Components: x2
M10 Barrel Nut x2
M10x70 Security Screw x8
2 Part Cover Cap
Thread Lock Solution
Required (Not Supplied)
BS EN 1176
Locate the Surface fix
Plate into the leg of the instrument.
3
Tools: x2
TX 45 Driver Bit
Thread Lock Solution
Required (Not Supplied)
Fix instrument to Surface fix plate using M10 bolt and Barrel Nut and use thread locking solution to prevent fixings working loose.
Fix Surface Plate to the ground surface Ground
Anchors Not provided cover fixings with caps provided
advertisement