User Manual
Color Door Camera DRC-4MC
•
Thank you for purchasing COMMAX products.
•
Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.
•
The company is not responsible for any safety accidents caused by abnormal operation of the product.
Contents
1. Introdution ..........................................................................2
2. Important Safeguard...........................................................3
3. Overview ............................................................................4
4. Package contents...............................................................6
5. Wiring and Installation ........................................................7
6. Specification ......................................................................8
1
1. Introduction
Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.
Model No. Serial No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the use to the presence of uninsulated
dangerous Voltage
” within the product s enclose that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the literature accompanying the appliance caution
Risk of electric shock do not open
CAUTION : To reduce the risk of electric shock, do not remove cover(or back) no user-serviceable part inside refer servicing to qualified service personnel
2
2. Important Safeguards
▲
Damage Requiring Service: This equipment from the power source and source and refer servicing to qualified service personnel under the following conditions: ⓐ when the power is damaged.
ⓑ if liquid has been spilled or objects have fallen into the unit ⓒ if the equipment has been exposed to rain or water.
ⓓ if the equipment has been dropped or otherwise damaged.
ⓔ when the equipment exhibits a distinct change in performance- this indicates a need for service.
▲
Water and Moisture: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
▲
Accessories: The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any mounting of the manufacture
’ facturer.
▲
Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
▲
Lightning: For added protection for this product before a lightning storm, or when it is left un attached and un used for long periods of time, unplug it from the wall outlt and disconnect the other system. This will prevent damage to the product due to lightning and power-line surges. If you live in an area heavily prone to lightning storms, it is recommended that you invest in power-line, telephone-line, RFcable and actuator/ polarization surge protectors to protect your appliance system from possible damage
3
3. Overview
①
②
③
④
⑤
⑥
⑦
⑧
⑨
①
White LED & Illumination Sensor : Offer clear image at night
②
Microphone : Deliver voice signal from a visitor
③
Camera Lens : Transfer image
* Make sure the lens is always kept clean
④
Speaker : Deliver voice signal to a visitor
⑤
Call Button : Pressed to call to a household
⑥
Angle Adjustment Lever : Adjust lens angle
4
⑦
Volume Adjuster : Adjust speaker volume
⑧
Monitor Connection Terminal (Polarity with care)
⑨
Door Release Connection Line
① White LED & Illumination Sensor : Offer clear image at night
② Microphone : Deliver voice signal from a visitor
③ Camera Lens : Transfer image
* Make sure the lens is always kept clean
④ Speaker : Deliver voice signal to a visitor
⑤ Call Button : Pressed to call to a household
⑥ Angle Adjustment Lever : Adjust lens angle
⑦ Volume Adjuster : Adjust speaker volume
⑧ Monitor Connection Terminal (Polarity with care)
⑨Door Release Connection Line
5
4. P ack age contents
MANUAL
Entrance Camera : DRC-4MC Mounting Bracket
T4X18 (2EA)
Bracket Fixing Screw
M3X8 (1EA)
Camera Fixing Screw
Manual
Volume Sheet
Connector
(4PX200)
6
5. Wiring and Installation
1. Match the fix the whole in the wall and the fixing bracket [FIG.1]
2. Match and connect monitor line as shown below [FIG.2]
(#1: Audio, #2: GND, #3: DC12V, #4: Video)
3. Adjust camera location on the wall by checking the image on monitor screen and fix its location
4. Connect the Door Release Connection Line as shown below [FIG.2]
5. Tighten a screw at the bottom side of the camera [FIG.1]
[FIG-1] [FIG-2]
SCREW T4X18 (2EA)
#1
#2
#3
#4
Audio
GND
DC12V
Video
MONITOR
#1
#2
#3
#4
Door Release Cable
Door Release
SCREW M3X8 (1EA)
7
6. Specification
Model No.
Rated Voltage / Power Consumption
Wiring (Main Unit / Door Release)
Sensor Type
Video Transmission Standard
Communication
Minimum Illumination
LED
Effective Viewing Angle
Angle Adjustment
Operating Temperature
Weight (g)
Dimension (mm)
Distance between a door camera and monitor
DRC-4MC
DC 12V (Supplied from monitor)
4 wires to a monitor (polarity)
2 wires to the door release (non-polarity)
CMOS IMAGE SENSOR
NTSC or PAL STANDARD.
Simultaneous communication
0.1 Lux (within 300mm)
Embedded night LED (activated at night)
Horizontal 75°, Vertical 55°
Up, down 12 Degrees
-10 ℃ ~ +40 ℃
400g
96(W) x 155(H) x 32.5(D)
Diameter (pie)
Diameter (meter)
0.5 0.65 0.8
28m 50m 70m
8
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133
Web site : www.commax.com
Printed In Korea / 2012.05.105
