FEATURES & SPECIFICATIONS
INTENDED USE
Provides task or accent lighting in commercial, retail, hospitality and residential applications. Ideal for use under and over cabinets, display cases, task lighting, office lighting, coves and utility/work areas.
CONSTRUCTION
Durable aluminum construction in a low-profile design. Frosted acrylic diffuser and continuous row of LEDs provides even illumination.
ELECTRICAL
Link up to 7.5’ of modular system to one transformer (required, sold separately). Fixtures can be linked endto-end with the included end row connector (1-3/8" spacing) or 18" linking cord). 3”, 24” and 121” connector cords may also be purchased separately for use between fixtures. Can be plugged in or direct-wired (splice box and 24" connector cord required for direct-wiring).
OPTICS
LEDs have a 50,000 hour L70 rated life. Provides a warm color temperature at 3000K, with 95 CRI.
Dimmable when used with the optional step dimmer (sold separately).
INSTALLATION
All mounting hardware included. Mounting clips allow for quick & easy installation. Can be flush mounted or angled at 30° using the provided clips. All configurations tested to IES LM79 standards.
LISTING
UL listed to US and Canadian safety standards.
WARRANTY
5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
NOTE : Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Type
Catalog
Number
Notes
Indoor General Purpose
Rayzer
TM
Modular LED
Lighting System
ORDERING INFORMATION For shortest lead times, configure products using bolded options .
Series 1,2
RAZ Rayzer low profile LED undercabinet
Length
9IN 9" nominal
12IN 1' nominal
18IN 1.5' nominal
24IN 2' nominal
Color temperature
30K 3000K
CRI
90CRI >90
Example: RAZ 12IN 30K 90CRI
Finish
(blank) Brushed nickel
Accessories /Replacement Parts 1,2
RAZTRANS24 120 24v transformer - 120v power source, includes 5' cord and plug and 24" connector cord (for linking to first fixture)
RAZTRANS24 MVOLT 24v transformer - Multi-Volt power source, includes integrated directwire junction box and 24" connector cord (for linking to first fixture)
RAZDIM Step dimmer with remote touch pad, 10' cord length on remote touchpad
RAZ CC121
RAZ CC24
RAZ CC3
RAZLVCC
121” Linking cord (fixture to fixture)
24” linking cord (fixture to fixture)
3” linking cord (fixture to fixture)
Low voltage linking cord (cord to cord), to connect multiple linking cords
RAZ ERC
RAZ PHD
End row connector (fixture to fixture, 1 3/8" fixture spacing, 1 connector per pack)
Power hub distributor, allows for additional fixture run
RAZ INLS26 In-line power switch (transformer to linking cord, 26" cord length)
UCD JB
UCD JB BL
Splice box - white (required for 120V direct wire)
Splice box - black (required for 120V direct wire)
UC ERC24 24” connector cord - white (required for 120V direct wire for splice box to transformer connection)
Notes
1 Link up to 7.5’ of modular system to one transformer.
2 Transformer is required for operation.
DECORATIVE INDOOR RAZ
Rayzer ™ LED Modular Lighting System
SPECIFICATIONS
Lumens (3000K):
Watts (3000K):
Lumens per watt:
Length:
Width:
9"
324
8
41
9-1/4 (23.5)
1-1/4 (3.18)
12"
434
10
43
18"
630
13.1
48
12-1/4 (31.1) 18-1/4 (46.4)
1-1/4 (3.18) 1-1/4 (3.18)
24"
958
18.3
52
24-1/4 (61.6)
1-1/4 (3.18)
Height: 1/2” (1.27) 1/2” (1.27) 1/2” (1.27)
All dimensions are inches (millimeters) unless otherwise indicated. Weights are pounds (kilograms).
1/2” (1.27)
Full photometric data report available within 2 weeks from request. Consult factory.
W
H
L
DECORATIVE INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com
RAZ
© 2010-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/07/22
Rayzer ™ LED Modular Lighting System
INSTALLATION DIAGRAM
Note: Fixture includes 1 3/8" end row connector, 18” linking cord, mounting clips for flush or 30º mounting, and screws.
Flush and 30º mounting clips are used with fixtures, power hub distributor and touch dimmer.
Power Hub Distributor (optional)
Allows for versatile wiring
Plug In
Standard
Direct-Wire
Optional
Splice Box:
UCD JB (white)
UCD JB BL (black)
6’ power cord included with transformer
24 Volt Transformer
(required, sold separately)
Includes 6’ power cord for plug in installation and 24” linking cord to connect thetransformer to the first stick
Splice Box and 24”
Connector Cord (optional)
Required for direct-wire installation
24” Connector Cord:
UC ERC24 R12 (white)
UC ERC24 BL (black)
Link up to 7.5’ of fixtures
(not including linking cords)
In-Line Power Switch (optional)
Connects the transformer to the linking cord
18” Linking Cord (included)
Use to link around corners or for wider spacing between fixtures
121” and 24” Linking Cord Available (optional)
End Row Connector (optional)
Use to link fixtures end-to-end
Step Dimmer
(optional)
3” Linking Cord - Fixture-to-Fixture (optional)
Use to link fixtures around corners or for wider spacing between fixtures
3” Linking Cord - Cord-to-Cord (optional)
Use to connect 2 linking cords
DECORATIVE INDOOR: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com
RAZ
© 2010-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/07/22
