Gogogate 2 Garage Door Opener Quick Start Guide

The Gogogate 2 is a device that allows you to remotely open and close your garage door. It connects to your home Wi-Fi network and can be controlled from anywhere in the world. The device is compatible with most garage door openers that have photoelectric safety sensors. You can also add multiple users to your Gogogate 2 device, so that other people can open or close your garage door.

PDF

Document

Quick Start Guide

Rev. 1.0

TO PREVENT SERIOUS INJURY OR DEATH FROM

MOVING GARAGE DOORS OR GATES:

WARNING

· DO NOT let children use the Gogogate product and app without adult supervision.

· ONLY operate your Gogogate device when you are in clear view of your

garage or gate and you have verified that there are no objects obstructing the operation

of the door. ALWAYS wait for garage door or gate to be completely closed.

· NEVER operate the remote access feature of your Gogogate without

ensuring that there is an adult physically present in front of the door or gate

validating that it is safe to start the remote operation of your device.

Read instructions carefully BEFORE beginning.

Please make sure your garage door is closed before you start installation. The

Gogogate product and our door sensors are meant to be used with garage door openers equipped with photoelectric safety sensors (manufactured after

1993). These sensors are normally found at the bottom of your garage door and avoid accidental closing of your garage door if an object or person is on the path of the door.

What’s in the box

USB WiFi adaptor Micro SD Card

Gogogate Device

SD card adaptor Power supply

3 x Cables

(push button)

Cable connector

(6 poles)

Cable connector

(4 poles)

Double sided tape

NOTE:

Cables (push button) have been pre-connected to the cable connector (6 poles) for your convenience.

1. Unpacking Gogogate

Download the Gogogate2 app on your Smartphone

(iOS & Android). Available in Apple Store and

Google Play.

USB WI-FI ADAPTOR

POWER LIGHT

STATUS LIGHT

RESET BUTTON

(factory default settings)

Power on your Gogogate device and wait until you see a solid red “Power” light and a green “Status” light blinking.

NOTE:

This device can work with up to three sensors. For instructions on how to program these sensors, download our sensor’s user manual at www.gogogate.com. No sensor included in the original Gogogate2 packaging. This device is NOT waterproof.

2. Initial Installation

A) Program device from Smartphone

Turn on Wi-Fi on your Smartphone, look for the

“GoGoGate”

network and connect to it (NB: GoGoGate is an open network generated by the device itself, no password required).

Open the Gogogate app and select

“ADD”

“BEGIN YOUR

INSTALLATION”

“WI-FI”

. Select your Gogogate device and fill all the fields in a 3 simple steps process. Then press SAVE and wait until your Gogogate 2 has rebooted. After hearing a beep, a blue light will start blinking fast on your Gogogate 2 device if connection to your Wi-

Fi network is successful.

2. Initial Installation

B) Program device from PC

First

power off

the Gogogate 2 device. Then remove the micro SD card from the device and insert it in your PC SD card reader using the provided SD card adaptor.

Micro SD Card SD card adaptor Your computer

Select the SD card folder on your PC and execute the Gogogate 2 installation program. Please write down the UDI* provided by the installation program and follow all the steps . (NB: Do

not erase

modify

any file in the SD card folder).

After completing all the steps, remove the SD card from PC and insert the micro SD card back into the Gogogate 2 device. Power on the device and wait until the device has rebooted. You will hear a beep and a blue light will start blinking in the USB antenna if connection to Wi-Fi network is successful.

*UDI: Unique Device Identifier

Continued on the next page >

< Following previous page

Open the Gogogate app, go to

“ADD”

“ADD GOGOGATE

ACCOUNT”

and use the same information introduced in the SD card program:

· Device UDI

(same provided by installation program)

· Login

(same used during device configuration)

· Password

(same used during device configuration)

3. Garage Door / Gate installation

A) Garage Door

FRONT VIEW

1 2 3 4 5 6 7 8 9 10

Your Garage Door

Push Button /

Wall Console

Gogogate Cable

White Cable

Red Cable

DOOR 1 DOOR 2 DOOR 3

IMPORTANT:

When connecting Gogogate 2 to wall console polarity does not matter.

B) Gates

If willing to attach the Gogogate 2 to your gate push button or control panel, please visit

http://gates.gogogate.com/gates.php

or send us an email at [email protected] with your operator model and make.

NOTE:

One Gogogate device can operate up to 3 different garage doors or gates.

For instructions on how to install a 2d or 3d garage door, please download our product datasheet or user manual at www.gogogate.com

4. Remote Access activation*

In your Gogogate app, go to

“EDIT”

“CONFIG DEVICE”.

Log into the Gogogate configuration webpage using your admin credentials (NB: Login for administrators will always be “admin”.

Please use same password used during initial installation).

Select the

“SETTINGS”

menu and the

“Remote Access”

option and then press “Enable Access”.

*This feature must be enabled if willing to remotely operate

and configure the Gogogate 2 system over the internet.

Continued on the next page >

< Following previous page

Accept terms and conditions and introduce the Gogogate authentication code found on the last page of this Quick

Start Guide. Then press

“Activate”.

You are now able to operate and configure the Gogogate 2 system remotely.

5. Add Users To Your Gogogate Device

In your Gogogate app, go to

“EDIT”

“CONFIG DEVICE”.

Log into the Gogogate configuration webpage using your admin credentials (NB: Login for administrators will always be “admin”.

Please use same password used during initial installation).

Select the

“USERS”

menu (or go to “SETTINGS” -> “Users”). Start creating users by clicking on the

“ADD USER”

option and fill all the fields according to your own preferences for each user.

6. Change settings on your Gogogate 2 device

In your Gogogate app, go to

“EDIT”

“CONFIG DEVICE”.

Enter your ID and password to log in. (NB: this feature is only available for system administrators).

Select the

“SETTINGS”

menu and choose one of the following options:

· Remote Access:

Allows you to enable/disable the

remote access feature for remote operation of the

system.

· Wi-Fi:

Allows you to modify your Wi-Fi network

settings.

· Ethernet USB Adapter:

Allows you to add/modify

your USB to Ethernet adaptor settings.

· Doors:

Allows you to add/modify your sensors’

4-digit code, type or doors’ name.

· Video:

Allows you to modify/add your IP camera

settings.

· Admin Alerts:

Allows you to modify your alerts

settings.

· Users:

Allows you to create new users, delete

existing ones and edit their settings individually.

7. Connect To An Existing Gogogate Device

Once the admin of a Gogogate 2 device has created a user account in the system for you, Gogogate will send you an email with the following information:

· Access type

· Device UDI*

· Login

· Password

*UDI: Unique Device Identifier

Open the Gogogate 2 app and select

“ADD” ->

“ADD GOGOGATE ACCOUNT”.

Use your UDI, user login and password. Then press

“Save”.

One Year Limited Warranty

The Gogogate product comes with a one (1) year warranty against mechanical and electrical defects provided the products have been used in accordance with the documentation provided. The 1 year warranty period begins as of the purchase date by the user of the device.

If customer does not have original proof of purchase, GOGOGATE INC. will determine warranty eligibility via the manufacturing date. If our product fails we will either 1) replace or repair your product or 2) decide to refund you the purchase price paid for the product and the foregoing will be the customer sole remedy for breach of this warranty. Products may be replaced by refurbished units or by different models of similar functionality. You also understand that above options will be implemented at the complete discretion of

GOGOGATE INC. Our limited warranty is transferable from original customer to subsequent owner but the warranty period will not be extended in duration or coverage as a consequence of this transfer in ownership. GOGOGATE INC. assumes no warranty obligation with regards to a) normal wear and tear, b) products with no workmanship or product defects, c) misuse, abuse, negligence accidents, fraud, c) use of improper voltage (this is a low voltage device), d) acts of God, e) non authorized or non intended use of the product, f) consumable parts such as batteries.

NOTICE:

To comply with FCC and/or Industry Canada (IC) rules, adjustment or modifications of this transceiver are prohibited. THERE ARE NO USER SERVICEABLE

PARTS.

This device complies with Part 15 of the FCC rules and IC RSS-210. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept interference received, including interference that may cause undesired operation. This device must be installed in a way where a minimum 8” (20 cm) distance is maintained between users/bystanders and device.

YOUR GOGOGATE AUTHENTICATION CODE

Still Having Issues? No problem.

Download our user manual in our website www.gogogate.com

or contact us at: [email protected]

www.gogogate.com

Hello! I am an AI chatbot specifically trained to assist you with the GoGogate Gogogate 2 Quick start Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Remote garage door control
Smartphone app
Multiple user support
Security features
Door sensor support

Frequently asked questions

You can connect Gogogate 2 to your Wi-Fi network using the Gogogate app or by programming the device from your PC.

To connect from your smartphone, turn on Wi-Fi on your Smartphone, look for the “GoGoGate” network and connect to it. Open the Gogogate app and select “ADD” -> “BEGIN YOUR INSTALLATION” -> “WI-FI”. Select your Gogogate device and fill all the fields in a 3 simple steps process. Then press SAVE and wait until your Gogogate 2 has rebooted. After hearing a beep, a blue light will start blinking fast on your Gogogate 2 device if connection to your WiFi network is successful.

There is a special option to add a new user to your Gogogate 2 account. You can add a new user from the Gogogate app by going to “EDIT” -> “CONFIG DEVICE”, login and go to “USERS” menu. Click on “ADD USER” option and fill all the fields according to your own preferences for each user.

The Gogogate product comes with a one (1) year warranty against mechanical and electrical defects provided the products have been used in accordance with the documentation provided.