Pentax Optio S10 Camera User Guide
Reklam
Reklam
Digital Camera
Operating Manual
To ensure the best performance from your camera, please read the Operating Manual before using the camera.
Thank you for purchasing this PENTAX Digital Camera.
Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
Regarding copyrights
Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the
Copyright Act. Please take care, as there are even cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performance or of items on display.
Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
To users of this camera
• There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields.
• The liquid crystal panel used in the LCD display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
Regarding trademarks
• PENTAX, Optio and smc PENTAX are trademarks of PENTAX Corporation.
• SDHC logo is trademark.
• DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
• All other brands or product names are trademarks or registered trademarks of their respective owners.
This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
Red Eye software © 2003-2006 FotoNation Inc. Face Tracker software © 2005-
2006 FotoNation Inc. In Camera Red Eye -- covered by U.S. Patent No. 6,407,777 and 7,042,505. Other patents Pending.
• There is a possibility that the illustrations and the display screen of the LCD monitor in this manual are different from the actual product.
• Both SD memory cards and SDHC memory cards are referred to as SD memory cards in this manual.
Using your camera safely
Sufficient attention has been paid to the safety of this product but please pay particular attention to the warnings indicated by the following symbols during use.
Warning
Caution
These symbols indicate that it is possible that the user may experience serious personal injuries if the warnings are not heeded.
These symbols indicate that it is possible that the user may experience minor or medium personal injuries, or material losses if the warnings are not heeded.
About the Camera
Warning
• Do not attempt to take the camera apart or remodel the camera. High voltages are present within the camera, and there is therefore a danger of electric shocks if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for example, the camera being dropped, please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock.
• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their necks.
• To avoid the risk of it being swallowed by mistake, keep the SD Memory
Card out of the reach of small children. Seek medical attention immediately if a memory card is accidentally swallowed.
• Use an AC adapter that is of the power and voltage specified for exclusive use with this product. The use of an AC adapter other than that specified exclusively for use with this product may cause fire or electric shocks.
• If the camera emits smoke or a strange smell, or in the event of any other irregularity, stop using the camera immediately, remove the battery or disconnect the AC adapter and contact your nearest PENTAX service center. Continued use of the camera may result in fire or electric shock.
1
2
Caution
• Do not attempt to disassemble, short, or place batteries in a fire or other high temperature location (above 60°C/140°F). Doing so may cause overheating, fire or explosion.
• Do not charge any batteries other than rechargeable lithium-ion battery
D-LI68. The battery could explode or catch fire.
• Do not place your finger on the flash when it is discharging as there is a risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a risk of discoloring.
• If any of the battery leakage should come in contact with your eyes, it may cause a loss of sight, do not rub them. Flush your eyes with clean water and get medical attention immediately.
• If any of the battery leakage should come in contact with skin or clothes, it may cause irritate the skin, wash the affected areas thoroughly with water.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature burns if such portions are held for long periods of time.
• Should the LCD be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.
About the Battery Charger and the AC Adapter
Warning
• Do not use the product at a voltage other than the specified voltage. Use with a power source or voltage other than that designed can cause a fire or electrical shock. The specified voltage is 100-240 V AC.
• Do not disassemble or modify the product. This can cause a fire or electrical shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical shock.
• If water should happen to get inside the product, consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical shock.
• If thunderstorm should be present during use of the battery charger or AC adapter, unplug the power cord and discontinue use. Continuing to use the product can cause damage to the equipment, fire or electrical shock.
• Wipe off the plug of the power cord if it should become covered with dust.
This can cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to drop onto it or allow the AC plug cord to become damaged due to excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still plugged in.
• Remove the battery and unplug the AC plug cord when not using the battery charger.
• Do not plug in the AC plug cord with wet hands. This can cause an electrical shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.
• To reduce the risk of hazards, use only CSA/UL Certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified
NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
• Do not use the battery charger to charge batteries other than rechargeable lithium-ion battery D-LI68. This can cause overheating or malfunctions.
3
4
Care to be Taken During Handling
• Take the Worldwide Service Network listing that is included in the package with you when traveling. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during travelling). Contents of a recording such as images and sounds cannot be guaranteed if recording, playback or data transfer from your camera to a computer, etc. is not possible due to a malfunction of your camera or recording medium (SD Memory Card), etc.
• The lens on this camera is not exchangeable. The lens is not removable.
• Do not clean the product with organic solvents such as thinner, alcohol or benzene.
• Places of high temperature and humidity should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside.
• Storing the camera where pesticides and chemicals are handled should be avoided. Remove the camera from its case and store in a well-ventilated place to prevent the camera from becoming moldy during storage.
• Do not use the camera where it may come in contact with rain, water or any other liquid, because the camera is not weather, water, or liquid resistant.
• Ensure that the camera is not subjected to substantial vibrations, shocks or pressure. Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, or ship, etc.
• The temperature range in which the camera can be used is 0°C to 40°C
(32°F to 104°F).
• The liquid crystal display will become black at high temperature but will return to normal when normal temperatures are returned to.
• The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a fault.
• Periodic checks are recommended every 1 to 2 years in order to maintain high-performance.
• If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera.
Therefore put the camera in a bag or plastic bag, and take the camera out when the difference in temperature has subsided.
• Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. as this may cause damage to the camera. If rain or drops of water get onto the camera, please wipe dry.
• Refer to “Precautions When Using an SD Memory Card” (p.24) regarding
the SD Memory Card.
• Please note that the formatting of the SD Memory Card or built-in memory will delete all data, however it may still be possible to recover that data using off-the-shelf data recovery software. Please manage your camera’s memory at your own risk.
• The AC plug cord supplied with the camera is for exclusive use with the
Battery charger D-BC68. Do not use it with any other equipment.
• Please do not press forcefully on the LCD monitor. This could cause breakage or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the LCD monitor.
• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.
LED Safety Standard
This device is a digital still camera that conforms to the safety standard
(IEC60825-1) for a Class 1 LED product.
Regarding Product Registration
To better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or the
PENTAX website.
Thank you for your cooperation.
Refer to the PC Connection Manual (bottom right of front side) for more information.
5
Contents
Using your camera safely ........................................................................ 1
Care to be Taken During Handling.......................................................... 4
Contents of the Operating Manual .......................................................... 9
Quick Lessons in Mastering the Camera............................................... 10
Checking the Contents of the Package ................................................. 12
Names of Operating Parts..................................................................... 14
6
Removing the Battery ............................................................................ 16
Charging the Battery Abroad................................................................. 19
Using household current ....................................................................... 21
Installing the SD Memory Card ................................................................. 23
Image Size and Quality of Still Pictures................................................. 25
Size and Quality of Movies .................................................................... 26
Setting the Display Language ............................................................... 29
Setting the Date and Time..................................................................... 29
Playing Back an Image.......................................................................... 36
Playing Back the Previous or Next Image ............................................. 36
Turning the Camera On and Off................................................................ 38
Turning the Camera On in Capture Mode ............................................. 38
Turning the Camera On in Playback Mode ........................................... 39
Using the Button Functions ...................................................................... 40
Voice Recording Mode .......................................................................... 43
How to Set the Menus ........................................................................... 44
Operating the Mode Palette....................................................................... 49
How to operate the Mode Palette.......................................................... 49
Changing the Mode ............................................................................... 55
Selecting the Capture Mode.................................................................. 55
Displaying Shooting Information in Capture Mode ................................ 55
Taking Pictures Using the Shake Reduction Function .......................... 58
Taking Pictures in the Basic Mode (Green Mode)................................. 59
Taking Pictures Automatically (Auto Picture Mode) .............................. 61
Setting the Functions (Program Mode).................................................. 63
Selecting the Picture Mode According to the Shooting Scene
(Picture Mode)................................................................................... 64
Taking Pictures of Dark Scenes (Night Scene Mode) ........................... 74
Reducing Camera Shake and Blurring in Pictures (Digital SR Mode)... 75
Taking Movies (Movie Mode) ................................................................ 76
Taking Pictures in Frame Composite Mode .......................................... 78
(Continuous Shooting Mode)............................................................. 81
Using the Remote Control Unit (optional).............................................. 83
Using Zoom to Change the Subject Size .............................................. 85
Setting the Shooting Functions................................................................ 87
Selecting the Focus Mode..................................................................... 87
Selecting the Flash Mode...................................................................... 90
Selecting the Recorded Pixels of Still Pictures...................................... 92
Selecting the Quality Level of Still Pictures ........................................... 94
Adjusting the White Balance ................................................................. 96
Selecting the Autofocus Settings........................................................... 98
Setting the Light Metering Mode to Determine the Exposure.............. 101
Setting the Exposure (EV Compensation)........................................... 104
Selecting the Settings for Taking Movies ............................................ 105
Setting the Instant Review Time.......................................................... 108
Setting the Green Button..................................................................... 109
Setting the Image Sharpness .............................................................. 112
Setting the Color Saturation ................................................................ 113
Setting the Image Contrast.................................................................. 114
Setting the Date Imprint....................................................................... 115
Saving the Menu Items (Memory) ....................................................... 116
Recording and Playback of Sound 118
Recording Sound (Voice Recording Mode) ........................................... 118
Recording a Voice Memo .................................................................... 121
Playing Back a Voice Memo................................................................ 122
Playing Back Still Pictures................................................................... 123
Calling Up the Images from the Built-in Memory................................. 124
Playing Back Movies ........................................................................... 125
Displaying Shooting Information in Playback Mode ............................ 126
Nine-Image Display/Calendar Display................................................. 127
Deleting Images, Movies and Sounds .................................................... 131
Deleting a Single Image, Movie or Sound ........................................... 131
7
8
Deleting Selected Images and Sound Files
(from Nine-Image Display) .............................................................. 134
Protecting Images, Movies and Sounds from Deletion (Protect)......... 136
Viewing Images on AV Equipment ......................................................... 138
Playing Back an Image Using the Remote Control Unit (optional)...... 139
Setting the Printing Service (DPOF) ....................................................... 140
Printing Single Images ........................................................................ 140
Direct Printing Using PictBridge............................................................. 143
Connecting the Camera to the Printer................................................. 143
Printing Single Images ........................................................................ 144
Printing Using the DPOF Settings ....................................................... 146
Disconnecting the Camera from the Printer ........................................ 146
Changing the Image Size and Quality ................................................. 147
Rotating the Displayed Image ............................................................. 150
Editing Pictures with Color Filters........................................................ 151
Editing Pictures with the Digital Filter .................................................. 153
Editing Pictures with Brightness Filter ................................................. 155
Removing Red-eye.............................................................................. 160
Adding a Frame (Frame Composite)................................................... 162
Setting Up the Start-up Screen ........................................................... 166
Formatting an SD Memory Card or the Built-in Memory ..................... 168
Changing the Sound Settings.............................................................. 169
Changing the Date and Time .............................................................. 172
Setting the World Time........................................................................ 174
Changing the Display Language ......................................................... 176
Changing the Image Folder Name ...................................................... 177
Changing the USB Connection Mode ................................................. 178
Changing the Video Output Format..................................................... 179
Adjusting the Brightness of the LCD Monitor....................................... 180
Setting Power Saving .......................................................................... 181
Setting Auto Power Off........................................................................ 182
Setting the Guide Display.................................................................... 183
Resetting to Default Settings ............................................................... 183
WARRANTY POLICY................................................................................ 198
Contents of the Operating Manual
This operating manual contains the following chapters.
1 Getting Started –––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the instructions.
2 Quick Start ––––––––––––––––––––––––––––––––––––––––––––
This chapter explains the simplest way to take pictures and play back images. Use it if you want to start taking pictures straightaway.
3 Common Operations ––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the buttons and how to use the menus. For more details, refer to the respective “Taking Pictures”,
“Recording and Playback of Sound”, “Playback/Deleting/Editing” and “Settings” chapters.
4 Taking Pictures ––––––––––––––––––––––––––––––––––––––––
This chapter explains the various way of capturing images and how to set the relevant functions, including how to use the Capture Mode screen to select the capture mode best suited to the situation.
5 Recording and Playback of Sound–––––––––––––––––––––––––
This chapter explains how to record sound only or add a voice memo to an image, and how to play back voice memos.
6 Playback/Deleting/Editing ––––––––––––––––––––––––––––––––
This chapter explains how to play back images on the camera or on a TV, how to delete, resize and crop images, and how to print images directly to the printer.
7 Settings –––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains how to set the camera-related functions.
8 Appendix––––––––––––––––––––––––––––––––––––––––––––––
This tells you about the messages displayed on the LCD monitor and what to do in the event of trouble.
1
2
3
4
5
6
7
8
The meanings of the symbols used in this operating manual are explained below.
1 indicates the reference page number for an explanation of the related operation.
indicates information that is useful to know.
indicates precautions to be taken when operating the camera.
9
10
Quick Lessons in Mastering the Camera
If you wish to master the camera soon after purchasing the .... Go through all the basic operations from preparation, photo-taking and reviewing as shown below. (For the operating instructions, see the pages in parenthesis.)
Prepare the camera.
Power the camera.
Charge (p.17) and install the battery. (p.16)
Install the SD Memory Card. (p.23)
Make the initial settings. (p.28-31)
Let’s get used to the basic operations.
Turn the camera on and off. (p.38)
Take still pictures. (p.32-35)
Mastering the shutter release is the key to taking good pictures.
Play back and delete the pictures. (p.36-37)
Switch between Capture mode and Playback mode.
Let’s take pictures in the Basic mode. (p.59-60)
This is the easiest way to take pictures.
Let’s use the menus.
Select the recorded pixels and quality level for still
Let’s use the Mode Palettes.
Select icons on the Mode Palettes. (p.49-54)
Just by selecting icons, you can activate desired modes for image capture or editing.
Let’s select a mode for capturing images.
Let’s use shooting functions.
For availability of functions for each
Capture Mode, see
Let’s enjoy reviewing the pictures you took.
Zoom display, nine-image display, and calendar
Once you get used to the basic operations, enjoy taking movies, editing pictures, or printing your favorite pictures.
11
Checking the Contents of the Package
Camera
Optio S10
Strap
O-ST20 ( ∗ )
Software (CD-ROM)
S-SW68
AV cable
I-AVC7 ( ∗ )
USB cable
I-USB7 ( ∗ )
Rechargeable lithium-ion battery
D-LI68 ( ∗ )
Digital Camera
Operating Manual
12
Battery charger
D-BC68 ( ∗ )
AC plug cord
To ensure the best performance from your camera, please read the Operating Manual before using the camera.
Operating Manual
(this manual)
PC Connection
Manual
You can transfer images and movies captured with a digital camera to your computer and then display and manage them by installing the software included on the provided CD-ROM to your computer and connecting your digital camera to your computer with the USB cable.
This section explains how to install the provided software “ACDSee for PENTAX” and the other necessary preparations for enjoying your digital camera pictures and movies on your computer.
PENTAX and Optio are trademarks of PENTAX Corporation.
© 2007 ACD Systems Ltd. All rights reserved. ACDSee and the ACDSee logo are trademarks of ACD Systems Ltd. in Canada, the U.S., Europe, Japan and other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United
States and other countries.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.
Mac OS and Macintosh are registered trademarks of Apple Computer, Inc.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
Operating Manual
(PC Connection Manual)
Quick Guide
Items marked with an asterisk ( ∗ ) are also available as optional accessories.
The Battery charger D-BC68 and the AC plug cord are not sold separately. They are available as the Battery charger kit K-BC68.
For details on the optional accessories, refer to “Optional Accessories” (p.190).
Names of Parts
Front
Strap lug
Battery/Card/
Terminal cover
DC input terminal
PC/AV terminal
Back
Access lamp
Speaker
Shutter release button
Power switch, Power indicator (green)
Flash
Remote control receiver
Microphone
Lens
Self-timer lamp/Auxiliary
AF light
LCD monitor
Tripod socket
13
14
Names of Operating Parts
Power switch
Zoom button
Q Playback button
Four-way controller
OK/Display button
Green/ i button
MENU button
Four-way controller
In this operating manual, the four-way controller is described as shown below.
g Four-way controller ( 2 ) b
OK q
Four-way controller ( 5 )
MODE
Four-way controller ( 3 )
Four-way controller ( 4 )
Button operation guide
The button operation guide appears at the bottom of the LCD monitor during operation.
The buttons are indicated as shown below.
Four-way controller ( 2 )
Four-way controller ( 3 )
Four-way controller ( 4 )
Four-way controller ( 5 )
MENU button
Shutter release button
OK button
2
3
4
5
MENU
SHUTTER
OK
Zoom button for cropping images and removing Red-eye
Green/ i button for operating as the
Green button for deleting an image
Getting Started
Attaching the Strap
Pass the narrow end of the strap through the strap lug and pass the other end through the loop.
1
15
1
Powering the Camera
1
2
1
3
Battery
2
Battery lock lever
16
Installing the Battery
Install the battery provided with the camera.
1
Open the battery/card cover.
Slide the battery/card cover in the direction 1 . The cover will automatically open in the direction 2 when you release your fingers from the cover.
2
Insert the battery with the 2 symbol facing toward the LCD monitor while using the side of the battery to press the battery lock lever in the direction indicated by the arrow.
3
Close the battery/card cover.
Removing the Battery
1
Open the battery/card cover.
2
Release the battery by using your finger to press the battery lock lever in the same direction as when you inserted the battery.
The battery will be ejected. Pull the battery out of the camera.
If you intend to use the camera continuously for a long period, use of the AC adapter kit K-AC63 (optional) is recommended. ( 1
• Insert the battery correctly. If the battery is incorrectly oriented, it may cause a malfunction.
• Do not remove the battery when the camera is turned on.
• If you do not intend to use the camera for a long time, remove the battery.
• If the camera is left without the battery for a long time, the date may be reset.
Charging indicator
While charging: Lights green
Charging finished: Turns off
To power outlet
2
3
1
Battery charger
1
AC plug cord
Charging the Battery
Use the battery charger to charge the battery before installing it in the camera for the first time or after a long period of non-use, or when the message [Battery depleted] appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger D-BC68.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the charger so that the PENTAX logo is visible.
The charging indictor lights green while the battery is charging and turns off when charging is finished.
4
Remove the battery from the battery charger when charging is finished.
• The time required to fully charge the battery is about 115 minutes
(max.). The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F). (The charging time may vary depending on the ambient temperature and charging conditions.)
• The battery has reached the end of its service life if it runs down soon after being charged. Replace with a new battery.
• Do not use the battery charger D-BC68 to charge batteries other than D-LI68 rechargeable lithium-ion battery, as the charger may overheat or be damaged.
• If the battery is inserted correctly but the charging indicator fails to light, the battery may be faulty. Replace it with a new battery.
17
1
• Approximate Operating Time (when the D-LI68 battery is fully charged)
Number of recordable images: Approx. 250 (at 23°C with the LCD monitor on and the flash used for 50% of shots)* 1
Playback time
Movie recording time
Sound recording time
: Approx. 240 min.* 2
: Approx. 80 min.* 2
: Approx. 230 min.* 2
* 1 The number of recordable images are based on CIPA standard measurement and may vary depending on capture mode and
* 2 shooting conditions.
Measured based on PENTAX standard and may vary depending on the condition of use.
• In general, battery performance temporarily deteriorates as the temperature decreases. When using the camera in a cold environment, keep it warm by putting it in your pocket or inside your coat. Battery performance that has deteriorated due to low temperature will be restored when the battery is returned to room temperature.
• Be sure to take a spare battery with you when traveling abroad or to a cold region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the symbol on the LCD monitor.
(lit green) : Adequate power remains.
↓
(lit green) : Battery is running low.
↓
(lit yellow): Battery is running very low.
↓
(lit red) : Battery is exhausted.
↓
[Battery depleted] : The camera will turn off after the message appears.
18
Charging the Battery Abroad
The battery charger supplied with the camera is designed to switch automatically to the voltage (100-240V) and frequency (50Hz, 60Hz) of the electricity supply in the country or region where used.
However, electrical socket shapes differ depending on the country or region. Before traveling abroad, you are advised to check the socket
shape in your destination (see “Main Socket Types in the Major
Countries and Regions of the World” (p.20)) and take an appropriately
shaped off-the-shelf adapter plug with you. (Electrical socket shapes may vary depending on every region in the country. Check the socket shape used in the region.)
The socket shape does not affect the charging method.
1
Type
• Use of an off-the-shelf transformer may lead to defective operation.
• Unplug the adapter plug from the power outlet when the battery charger is not in use.
A B BF C S
—
19
Main Socket Types in the Major Countries and Regions of the
World
1
North America U.S.A., Canada
Europe,
Former Soviet
Union
Iceland, Ireland, Italy, Ukraine, Austria,
Netherlands, Kazakhstan, Greece, Sweden,
Denmark, Germany, Norway, Hungary, Finland,
France, Belarus, Belgium, Rumania, Russia
Asia
U.K.
Spain
Switzerland, Poland, Portugal
Taiwan, Japan
Sri Lanka, Maldives
Nepal, Bangladesh, Mongolia
Vietnam
India, Indonesia, Pakistan, Macau
Oceania
Thailand
Korea
Philippines
Singapore, Hong Kong
China
Malaysia
Australia, Tonga, New Zealand, Fiji
Guam
Tahiti
Central and
South
America
Colombia, Jamaica, Haiti, Panama, Bahamas,
Puerto Rico, Venezuela, Mexico
Brazil, Peru
Chile
Argentina
Middle East Israel, Iran
Kuwait
Africa
Jordan
Canary Islands, Guinea, Mozambique, Morocco
Kenya, South Africa
Algeria
Egypt
Zambia, Tanzania
A
9
9
9
9
9
9
9 9
9
9
9 9
9
9
9
9
B
9
9
9
9
9
9
9
9 9
9
9
BF
9
9
9
9 9
9
9
C
9
9
9
9
9
9
9
9
9
9
9
9
9
9 9
9
9
9
9 9
9
9
9
S
9
9
9
9
20
1
To power outlet
AC plug cord
4
1
2 4 marks
AC adapter
3
Using household current
We recommend using the AC adapter kit K-AC63 (optional) if you intend to use the LCD monitor for a long time or connect the camera to a PC.
1
Make sure that the camera is turned off and open the terminal cover.
2
Connect the DC terminal on the AC adapter to the DC input terminal on the camera, being sure to match the
4 marks.
3
Connect the AC plug cord to the AC adapter.
4
Plug the AC plug cord into the power outlet.
• Make sure that the camera is turned off when connecting or disconnecting the AC adapter.
• Make sure that the AC plug cord and connecting cable are inserted securely. The data may be lost if the cable becomes disconnected while you are taking pictures.
• Be sure to read the operating manual accompanying the AC adapter before using the adapter.
• Be sure to match the 4 marks when connecting the DC terminals.
Inserting the plugs with too much force may damage them.
21
1
Precautions When Using the Battery Charger or AC Adapter
To avoid the risk of fire or electric shock when using the battery charger
or AC adapter, be sure to read the section on “Using your camera safely” on page 1.
22
Installing the SD Memory Card
1
1
2
2 SD Memory Card 3
To remove the card, push in and pull out
1
You can use an SD Memory Card with this camera. Images are recorded on the SD Memory Card or in the built-in memory of the camera.
When shooting with an SD Memory Card installed
?
appears in the upper right corner of the LCD monitor and the images are recorded on the card.
When shooting with no SD Memory Card installed
@ appears in the upper right corner of the LCD monitor and the images are recorded in the built-in memory.
• Make sure that the camera is turned off before inserting or removing the SD Memory Card.
• Be sure to format unused cards or cards that have been used in
another camera. Refer to “Formatting an SD Memory Card or the
Built-in Memory” (p.168) for instructions on formatting.
1
Open the battery/card cover.
Slide the battery/card cover in the direction 1 . The cover will automatically open in the direction 2 when you release your fingers from the cover.
2
Insert an SD Memory Card so the label (the side with the
2 symbol) is facing toward the LCD monitor and push the card in until it clicks.
3
Close the battery/card cover.
To remove the card, eject the card by pressing it in the direction indicated by the arrow and pull it out.
• The number of recordable images varies depending on the capacity of the SD Memory Card or built-in memory and the selected image size and quality. (
• If you store your favorite images and sounds in the built-in memory, you can play them back whenever you wish (My album function). ( 1
23
1
Data Backup
Very occasionally, data stored in the built-in memory becomes unreadable. As a backup measure, we recommend that you transfer important data to a PC or store the data in a medium other than the built-in memory.
Precautions When Using an SD Memory Card
• Make sure that the camera is turned off before opening the battery/card cover.
• The SD Memory Card is equipped with a write-protect switch.
Write-protect switch
Setting the switch to [LOCK] protects the existing data by prohibiting recording of new data, deletion of existing data or formatting of the card.
• Care should be taken if you remove the SD Memory Card immediately after using the camera, as the card may be hot.
• Do not remove the SD Memory Card or turn the camera off while data is being recorded on the card, images or sound are being played back, or the camera is connected to a PC with the USB cable as this may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperature.
• Be sure to format unused cards or cards that have been used in another camera.
Refer to “Formatting an SD Memory Card or the Built-in Memory” (p.168) for
instructions on formatting.
• Do not remove the SD Memory Card during formatting as this may damage the card and render it unusable.
• The data on the SD Memory Card may be deleted in the following circumstances.
PENTAX does not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical interference.
(3) when the card has not been used for a long time.
(4) when the card is ejected, the AC adapter is disconnected or the battery is removed while the data on the card is being recorded or accessed.
• The SD Memory Card has a limited service life. If it is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a PC.
• Avoid using or storing the card where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation.
• When using an SD Memory Card with a slow recording speed, recording may stop while you are taking movies even when there is adequate space in the memory, or shooting and playback may take a long time.
• Before purchasing an SD Memory Card, please check the PENTAX website to ensure that it is compatible with your camera. You can also contact the nearest
PENTAX service center for this information.
• If you are going to discard, give away or sell your SD Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information. Please note that formatting the
SD Memory Card will not necessarily delete the data so that it cannot be recovered using off-the-shelf data recovery software. There are off-the-shelf secure data deletion software programs available that will completely delete the data. In any case, the data on your SD Memory Card should be managed at your own risk.
24
Image Size and Quality of Still Pictures
Select the image size and quality best suited to your purpose.
Higher quality levels and numbers of recorded pixels produce clearer images for printing, but the resulting increase in file size reduces the total number of pictures that can be taken.
When you select high image quality as well as a large image size, it may take ten seconds or more for the camera to finish recording after shooting.
Select the appropriate number of recorded pixels and quality level on the
[ A Rec. Mode] menu.
How to Set the Menus 1
Selecting the Recorded Pixels of Still Pictures 1
Selecting the Quality Level of Still Pictures 1
Appropriate Sizes According to Use
10M (3648×2736)
7M (3072×2304)
5M (2592×1944)
3M (2048×1536)
2M (1600×1200)
1024 (1024×768) 0
640 (640×480)
For printing images with high-resolution settings in your printer, printing at A4 size or larger, or editing and processing images
For printing at postcard size
For using as images on websites, or attaching images to e-mails
The default setting is 10M (3648×2736).
Appropriate Quality According to Use
C Best
D Better
E Good
Lowest compression ratio. Suitable for large A4-size photo prints.
Standard compression ratio. Suitable for photo prints or viewing images on a computer screen.
Highest compression ratio. Suitable for attaching to e-mails or creating websites.
The default setting is D .
1
25
1
Approximate Number of Recordable Images by Size and Quality
Quality Level
Recorded Pixels
10M (3648×2736)
7M (3072×2304)
5M (2592×1944)
3M (2048×1536)
2M (1600×1200)
1024 (1024×768)
C
Best
147
208
293
444
623
1133
D
Better
213
302
424
642
900
1638
E
Good
296
418
588
890
1247
2268
Sound
8 hr.
35 min. 26 sec.
640 (640×480) 2079 3004 4160
• The table above indicates the approximate number of images and recording time when using a 512MB SD Memory Card.
• The table above is based on standard shooting conditions specified by
PENTAX and may vary depending on the subject, shooting conditions, capture mode, SD Memory Card, etc.
Size and Quality of Movies
Select the size and quality best suited to your purpose.
The larger size and the higher quality level E are selected, the clearer moving images are produced, but the file size is increased.
Select the appropriate size and quality on the [ A Rec. Mode] menu.
Selecting the Recorded Pixels of Movies 1
Selecting the Quality Level of Movies 1
Appropriate Sizes (Recorded Pixels) According to Use
640 (640×480)
Viewing high-quality movies at VGA size. The recordable time is shorter.
320 (320×240) Smaller file size allows a longer time recording.
The default setting is 640 (640×480).
26
Approximate Recordable Time by Size (Recorded Pixels) and
Quality
Quality Level
Recorded Pixels
C
Best
D
Better
E
Good
640 (640×480) 22 min. 58 sec.
28 min. 47 sec.
34 min. 33 sec.
320 (320×240) 1 hr. 28 min. 53 sec. 1 hr. 50 min. 25 sec. 2 hr. 7 min. 18 sec.
The default setting is C .
• The table above indicates the approximate recording times when using a 512 MB
SD Memory Card.
• The table above is based on standard shooting conditions specified by
PENTAX and may vary depending on the subject, shooting conditions, capture mode, SD Memory Card, etc.
1
27
1
Initial Settings (Setting the Display
Language and the Date and Time)
Power switch
Four-way controller
OK button
In this operating manual, the four-way controller is described as shown below.
g Four-way controller ( 2 ) b
OK q
Four-way controller ( 5 )
MODE
Four-way controller ( 3 )
Four-way controller ( 4 )
If the Initial Setting screen or Date Adjust screen appears when you turn the camera on, follow the procedure below to set the display language and/or current date and time.
If the Initial Setting screen appears:
1
p.29 - 29 “Setting the Display Language”, “Setting the
If the Date Adjust screen appears:
1
p.29 - 30 “Setting the Date and Time”
If you want to change the initial settings, refer to “Changing the Date
and Time” (p.172) and “Changing the Display Language” (p.176).
28
Setting the Display Language
You can select the language in which the menus and error messages are displayed from the following: [English], [French], [German], [Spanish],
[Portuguese], [Italian], [Dutch], [Danish], [Swedish], [Finnish], [Polish],
[Czech], [Hungarian], [Turkish], [Russian], [Thai], [Korean], [Chinese
(traditional and simplified)] and [Japanese].
1
Press the four-way controller ( 5 ).
The Language/ screen appears.
2
Use the four-way controller
( 2345 ) to select a language.
Initial Setting
Hometown
New York
English
0:00
The default setting is English.
3
Press the OK button.
4
Press the four-way controller ( 3 ).
Video Out
MENU Cancel
NTSC
OK OK
The frame moves to [ W ].
5
Use the four-way controller ( 45 ) to select the desired city (Hometown).
6
Press the four-way controller ( 3 ).
The frame moves to [DST] (Daylight Saving Time).
7
Use the four-way controller ( 45 ) to select [ O (On) /
P (Off)].
8
Press the OK button.
The Date Adjust screen appears.
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller ( 5 ).
Date Adjust
The frame moves to [mm/dd/yy].
2
Use the four-way controller ( 23 ) to select the date display style.
Date Style
Date
Time mm/dd/yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
MENU Cancel OK OK
1
29
1
3
Press the four-way controller ( 5 ).
The frame moves to [24h].
4
Use the four-way controller ( 23 ) to select [24h] (24-hour display) or
[12h] (12-hour display).
5
Press the four-way controller ( 5 ).
The frame returns to [Date Style].
6
Press the four-way controller ( 3 ).
The frame moves to [Date].
Date Adjust
Date Style
Date
Time
MENU Cancel mm/dd/yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK OK
Date Adjust
Date Style mm/dd/yy 24h
Date
Time
MENU Cancel
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK OK
7
Press the four-way controller ( 5 ).
The frame moves to the month.
8
Use the four-way controller ( 23 ) to change the month.
Date Adjust
Date Style
Date mm/dd/yy 24h
0 1 / 0 1 / 2 0 0 7
Change the day and year in the same manner.
Next, change the time.
Time
MENU Cancel
0 : 0 0
OK OK
If you have selected [12h] in Step 4, the setting switches between am and pm corresponding to the time.
• When you finish the settings and press the OK button, the camera clock is reset to 00 seconds.
• To set the exact time, press the OK button when the time signal
(on the TV, radio, etc.) reaches 00 seconds.
30
• You can cancel the settings for the Initial Setting by pressing the
MENU button. If you take pictures without completing the Initial
Setting, the Initial Setting screen will appear next time you turn on the camera.
• You can change your settings for the Initial Setting later using the
[ H Set-up] menu.
Language: “Changing the Display Language” (p.176)
City, Daylight saving time: “Setting the World Time” (p.174)
Date and Time: “Changing the Date and Time” (p.172)
• The video output format is automatically set according to the language you have selected. If the output format is different from the one used in your country or region, change the format following the procedures
described in “Changing the Video Output Format” (p.179).
Language
English (English)
French ( )
German (Deutsch)
Spanish (
Portuguese (
)
)
Italian (Italiano)
Netherlands (Nederlands)
Danish (Dansk)
Swedish (Svenska)
Finnish (Finnish)
Polish (Polish)
Czech (Czech)
Hungarian (Hungarian)
Turkish (
Russian (
)
)
Thai ( )
Korean ( )
Chinese (traditional) (
Chinese (simplified) (
Japanese
)
)
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
Video Output Format
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
NTSC
1
31
2
Quick Start
Taking Still Pictures
Power switch
Shutter release button
Zoom button
OK/Display button
Green button
The simplest procedure for taking still pictures is described below. The flash discharges automatically depending on the light conditions.
1
Press the power switch.
The camera turns on.
2
Compose the picture on the LCD monitor.
The camera AF will focus on the area within the focus frame.
Press the zoom button to change the size of the subject.
Zoom button( x ) : Enlarges the subject.
Zoom button ( w
) : Diminishes the subject.
3
Press the shutter release button halfway.
Focus frame
The focus frame on the LCD monitor will light green when the camera is in focus.
4
Press the shutter release button fully.
The picture is taken.
The image appears on the LCD monitor for 0.5 seconds (Instant
Review). The image is recorded on the SD Memory Card installed in the camera, or in the built-in memory of the camera.
32
Pressing the shutter release button
Press the shutter release button slowly in two steps. This allows for exact focusing as well as preventing camera shake.
Basic way of shutter release
1
Press the shutter release button halfway.
Lightly press the shutter release button until you feel the click on your finger.
2
Confirm the focus frame on the
LCD monitor turns green.
Hold the shutter release button and wait until the focus frame turns green. The camera is in focus.
3
Press the shutter release button fully.
Press it down slowly until the shutter is released.
The camera is in focus.
2
The picture is taken.
You can press the shutter release button all the way down (single step) to take a picture if the camera Focus Mode is set to Standard
(Autofocus).
This allows you to release the shutter at the right moment. The pictures are taken as deep-focus (pan focus) shots.
33
2
Focus lock
When you have difficulty in auto focusing on a subject, try the procedures below.
You may have difficulty in auto focusing on such subjects as:
• Subject contrast is very low. (a blue sky, solid white walls, etc.)
• Dark places, black objects, or subjects that cannot reflect light.
• Areas of strongly reflected light or backlit subjects
• Fine patterns
• Rapidly moving objects
• When a distant object and a close object are both in the focus frame.
1
Find an alternate subject that is at the same distance from the camera as the desired subject.
2
Focus on the alternate subject.
Locate it in the focus frame on the LCD monitor.
3
Press the shutter release button halfway.
The focus frame turns green when the camera is in focus.
4
While holding the shutter release button halfway, move the camera to obtain the desired composition.
The focus is locked at the point you set in step 3 even if you recompose. (Focus lock)
5
Press the shutter release button fully.
34
Instant Review
By default, the image is displayed on the LCD monitor for 0.5 seconds right after shooting (Instant Review). You can change the display time for the Instant Review. ( 1
If you set it longer, you can delete the image while it is displayed on the
LCD monitor.
1
Press the Green/ i button while the image is displayed.
The screen for deleting the image appears.
2
Press the four-way controller ( 2 ) to select [Delete] and press the OK button.
The image displayed on the LCD monitor is deleted.
Brightening the LCD Backlight
You can temporarily brighten the LCD backlight to improve viewing.
(LCD Bright Mode)
It is useful when you view the LCD monitor outdoors or in brighter places.
1
In Capture mode, press and hold the OK/Display button for more than 1 second.
The LCD monitor turns brighter for a certain amount of time.
2
You can cancel the function by doing either of the followings.
- Switch the display mode to LCD Backlight Off. ( 1
- Turn off the camera.
35
Quick Start
Playing Back Still Pictures
2
Playing Back an Image
You can display the still picture you have just taken.
1
Press the Q Playback button after taking a picture.
The image appears on the LCD monitor.
When you press and hold the OK/Display button for more than 1 second, the LCD
Bright Mode is activated. The LCD monitor turns brighter for a certain amount of time.
Zoom Display
Playback button
Four-way controller
OK/Display button
Green button
Playing Back the Previous or Next Image
Still pictures can be played back one at a time, proceeding either forward or backward.
1
Press the Q Playback button after taking a picture.
The image appears on the LCD monitor.
2
Press the four-way controller ( 45 ).
Four-way controller ( 4 ): Displays the previous image.
Four-way controller ( 5 ): Displays the next image.
36
Deleting the Displayed Image
1
Press the Green/ i button when playing back an image.
File No.
The screen for deleting the image appears.
2
Press the four-way controller ( 2 ) to select [Delete] and press the OK button.
Cancel
The image displayed on the LCD monitor is deleted.
3
Press the Q Playback button again or press the shutter release button halfway.
OK
The camera is ready for taking pictures.
• The last picture taken appears on the LCD monitor when you switch to the Playback mode.
• You can enlarge the image displayed on the LCD monitor by pressing the zoom button. (If you press the zoom button to enlarge a rotated image, the enlarged image will return to its original position. If you stop enlarging the image, the image will be rotated again.)
• If there is no image stored, the message [No image/sound] appears.
2
Deleting a Single Image, Movie or Sound 1 p.131
37
Common Operations
Turning the Camera On and Off
Power switch, Power indicator
Playback button
3
Turning the Camera On in Capture Mode
1
Press the power switch.
The power indicator lights up in green. The lens extends and the camera turns on in the “Capture mode”. The camera is ready for taking pictures by pressing the shutter release button.
You can switch to other modes by pressing the Q Playback button.
• Press the Q Playback button once to switch to the “Playback mode”. (The lens is not retracted.)
• Press and hold the Q Playback button for 2 seconds to switch to the “Playback mode”. (The lens is retracted.)
• Press and hold the Q Playback button for more than 4 seconds to show the images stored in the built-in memory with the SD memory card installed.
2
Press the power switch again.
The camera turns off with the lens retracted.
If you press and hold the power switch for a while, the camera will be turned off.
Switching between Capture Mode and Playback Mode
1
38
Turning the Camera On in Playback Mode
1
Press the power switch while pressing the Q Playback button.
The power indicator lights green and the camera turns on in the
“Playback mode” with the lens retracted.
To switch to the “Capture mode”, press the Q Playback button again.
Playing Back Still Pictures 1
3
39
Using the Button Functions
1
3
4
5
6
2
3
Capture Mode
1
2
3
4
5
6 w / x Zoom button
Changes the size of the subject. ( 1
Q Playback button
Switches to the Playback mode. When pressed again, returns to Capture mode. ( 1
Four-way controller ( 2345 )
(
( q 5 )
( g 2 )
( X 3 ) Displays the Capture Mode Palette. ( 1
b 4 )
Changes the focus mode. ( 1
Changes the drive mode. ( 1
Changes the flash mode. (
OK/Display button
1
Changes the information displayed on the LCD monitor. ( 1
When you press and hold the button for more than 1 second, the LCD Bright Mode is activated. The LCD monitor turns brighter for a certain amount of time. ( 1
Green/ i button
Enters Green Mode. (
You can assign a different function to the Green button by selecting
[Green Button] in the [ A Rec.Mode] menu. ( 1
MENU button
Displays the [ A Rec.Mode] menus. (
You can enter Demo Mode when you press and hold the button for more than 5 seconds, even if the [ A Rec.Mode] menu is displayed.
Pressing any button while in Demo Mode will return you to Capture Mode.
In this operating manual, the four-way controller is described as shown below.
g Four-way controller ( 2 ) b
OK q
Four-way controller ( 5 )
Four-way controller ( 3 )
MODE
Four-way controller ( 4 )
40
1
2
3
4
5
6
Playback Mode
1
2
3 w / x Zoom button
Press w / f in single-image display to switch to nine-image display. Press x / y to return to the previous display. ( 1
Press x / y to enlarge the image in single-image display. Press w / f to return to the previous display. (
Press w / f in nine-image display to switch to the calendar display.
( 1
Q Playback button
Switches to Capture mode. When switched to the Playback mode by pressing the Q Playback button in Voice Recording mode, pressing the
Q Playback button again switches to the Voice Recording mode.
Four-way controller ( 2345 )
For playing back still images
( 45 ) : Displays the previous or next image in single-image display.
( 1
When rotating the displayed image, the image is rotated 90 degrees clockwise each time you press the ( 5 ), and 90 degrees
( 3 ) counter clockwise each time you press the ( 4 ). ( 1
: Displays the Playback Mode Palette. ( 1
( 2345 ) : Moves the display area of the enlarged image. (
Selects an image in nine-image display. ( 1
Selects a date in calendar display. ( 1
For playing back movies
( 2 ) : Plays back and pauses a movie. ( 1
( 45 ) : Frame forwards, frame reverses, fast forwards and reverses a movie during playback. ( 1
( 3 ) : Stops a movie during playback. (
3
41
3
4
5
6
For playing back voice recording files ( 1
( 2 ) : Starts playback. When pressed again, pauses playback.
( 45 ) : Selects a recorded file before playback. Performs the following operations during playback.
Files with no recorded indexes:
( 4 ) Rewinds five seconds.
( 5 ) Advances five seconds.
Files with recorded indexes:
( 4 ) Starts playback from the previous index.
( 5 ) Starts playback from the next index.
OK/Display button
Changes the information displayed on the LCD monitor. ( 1
When you press and hold the button for more than 1 second, the LCD
Bright Mode is activated. The LCD monitor turns brighter for a certain amount of time. ( 1
Returns to a single-image display in nine-image display. ( 1
Displays the selected image full screen in calendar display. ( 1
Green/ i button
Deletes the image displayed on the LCD monitor. ( 1
MENU button
Displays the [ H Set-up] menus. ( 1
You can enter Demo Mode when you press and hold the button for more than 5 seconds, even if the [ H Set-up] menu is displayed.
Pressing any button while in Demo Mode will change the mode to Capture
Mode.
42
1
2
3
4
Voice Recording Mode
1
2
3
4
Shutter release button
When pressed, starts recording. When pressed again, stops recording.
When pressed for more than one second, recording continues for as long as the button is held down and stops when the button is released.
Q Playback button
Switches to Playback mode. ( 1
p.120) When pressed again, returns to
Voice Recording mode.
OK/Display button
Turns the LCD monitor on and off.
MENU button
When pressed during recording, an index can be added.
Pressing this button while in recording standby displays the [ A
Rec.Mode] menu, while in playback standby the [ H Set-up] menu is displayed. ( 1
3
43
Setting the Menus
Press the MENU button to display the menu on the LCD monitor.
There are two different menus, [ A Rec.Mode] menu and [ H Set-up] menu.
3
How to Set the Menus
The button operation guide appears at the bottom of the LCD monitor while you are making settings for the menus.
1
Press the MENU button.
The [ A Rec.Mode] menu appears.
The selected area is highlighted.
(Pressing the MENU button in Playback mode displays the
[ B Set-up ] menu.)
2
Press the four-way controller ( 45 ).
Each press switches between [ A Rec.Mode] menu and [ H Set-up] menu.
3
Use the four-way controller ( 23 ) to select an item.
Moves the highlight up or down.
4
Press the four-way controller ( 5 ).
A pull-down menu or setting screen appears.
The pull-down menu displays only those items that can be selected for the current camera settings.
5
Use the four-way controller ( 23 ) to change the setting.
The setting changes each time the four-way controller ( 23 ) is pressed.
To Save the Setting and Start Taking Pictures
6
Press the shutter release button halfway.
The setting is saved and the camera enters the “Capture mode”.
When the shutter release button is pressed fully, the picture is taken.
44
To Save the Setting and Begin Playback of Images
6
Press the Q Playback button.
The setting is saved and the camera enters the “Playback mode”.
To Save the Setting and Continue with Menu Operations
6
Press the OK button or the four-way controller ( 4 ).
The setting is saved and the screen returns to Step 3.
To Cancel the Changes and Continue with Menu Operations
6
Press the MENU button.
The changes are canceled and the screen returns to Step 3.
The MENU button functions differ depending on the screen activated at the time. See the button operation guide displayed at the bottom of the LCD monitor.
MENU
Exit : Saves the current setting, exit the operation and return to the original screen (Capture or Playback mode).
MENU
: Saves the current setting and return to Step 1.
MENU
Cancel: Cancels the current selection, exit the operation and return to Step 3.
• If you press the MENU button with the pull-down menu displayed, the setting is cancelled.
• If you press the OK button, the MENU button or the four-way controller ( 4 ) with the pull-down menu displayed, the menu returns to the screen used for selecting an item.
• The menu is exited automatically one minute after the last operation.
3
45
3
1
Example of Menu Operation
MENU button
[ A Rec.Mode] Menu
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
3
MENU Exit
OK OK
3
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10 M
AWB
AUTO 800
OK OK
3
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
OK OK
3
Rec. Mode
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
Green Button
±0.0
MENU Exit
OK OK
To the next screen
2
OK
OK
[ H Set-up] Menu
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
4
OK
OK
4’
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Cancel
10
M
AWB
Auto
OK OK
OK
OK
Select Screen
Memory
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
White Balance
MENU Cancel OK OK
46
Menu List
[ A Rec.Mode] Menu
Item
Recorded Pixels
Quality Level
White Balance
Focusing Area
Focus Limiter
Aux. AF Light
Description
For selecting the number of pixels
For selecting the image compression ratio
For adjusting the color balance according to lighting
For changing the area of the autofocus
For limiting the focusing range of the lens in accordance with the shooting conditions
For focusing with auxiliary AF light when the subject is dim and the autofocus does not function properly
AE Metering
Sensitivity
EV Compensation
For setting the metering method to determine the exposure
For setting the sensitivity
For adjusting the exposure between –2.0EV and +2.0EV
Recorded Pixels For selecting the recorded pixels of the movie
Quality Level
Movie SR
For selecting the quality level of the movie
For compensating for camera shake of the movie automatically
Digital Zoom
Instant Review
Memory
Green Button
Sharpness
Saturation
Contrast
Date Imprint
For taking digital zoom pictures
For setting the Instant Review time
For saving the shooting function settings when the camera is turned off
For registering a function on the Green button
For setting the sharpness
For setting the saturation
For setting the contrast
For imprinting the date on still pictures.
Page
3
47
3
[ H Set-up] Menu
Item
Format
Sound
Date Adjust
World Time
Language/
Folder Name
USB Connection
Video Out
Brightness Level
Power Saving
Quick Zoom
Auto Power Off
Guide Display
Reset
Description
For formatting the SD Memory Card or built-in memory
For adjusting the operation sound volume and the playback volume and setting the type and volume of start-up sound, shutter sound, key operation sound, self-timer sound.
For adjusting the date, time, and display style
For setting the world time
For changing the language in which menus and messages appear
For selecting the way of naming image folders
For changing the USB connection mode
For setting the video output format
For changing the brightness of the LCD monitor
For setting the Power Saving function
For displaying the image at the maximum magnification by pressing the zoom button once
For turning off the power automatically
For showing the mode selected on the screen in Capture mode, the status of the four-way controller, and assignment of the Green button. For showing the description for the selected item on the Mode Palette.
For returning the camera settings to defaults
Page
48
Operating the Mode Palette
Press the four-way controller ( 3 ) to display the Mode Palette on the LCD monitor.
There are two different Mode Palettes, the “Capture Mode Palette” and the “Playback Mode Palette.” You can activate the Capture mode most appropriate for the shooting conditions or edit the taken images just by selecting the icons.
How to operate the Mode Palette
The button operation guide appears at the bottom of the LCD monitor while you are using the Mode Palette.
1
Press the four-way controller ( 3 ).
In Capture mode, the “Capture Mode Palette” appears.
In Playback mode, the “Playback Mode Palette” appears.
2
Use the four-way controller ( 2345 ) to select an icon.
3
Press the OK button.
The screen for the selected mode appears.
3
49
Mode Palette List
Capture Mode Palette
Auto Picture
MENU Cancel OK OK
3
• Some functions may not be available or may not function fully
depending on the shooting mode. For details, refer to “Available functions for each Capture mode” (
1
• When you select an icon on the Mode Palette, waiting for about 3 seconds, the description for the selected mode appears. You can set whether or not the description appears with the “Guide
Display” on the “ u Set-up” menu. ( 1
• For z / / and / i , press the OK button to switch to the selected icon. Only the icon of the selected mode is displayed on the Mode Palette. If you change the selection, the newly selected icons replace the previous ones.
There are 18 available shooting modes.
1 b Auto Picture
Use this mode to select the best shooting mode automatically. (p.61)
2 R Program
The basic picture-taking mode. You can let the camera set the
functions or choose various functions yourself. (p.63)
3 A Night Scene
Ideal for taking night views. It is best to use a tripod in this mode. Use the flash if including
people in your picture. (p.74)
4 C Movie
Use this mode for taking movies. Sound is recorded at the same time.
50
5 O Voice Recording
Use this mode to record sound files. Be careful not to cover the
microphone on the top of the camera with your hand. (p.118)
6 q Landscape
Use this mode for taking landscape views. The depth of field encompasses a wide area.
7 < Flower
Use this mode for taking bright, colorful
pictures of flowers with soft outlines. (p.64)
3
8 z Natural Skin Tone
Adjusts the color and brightness to reproduce skin tone more beautifully than Portrait mode.
9 Portrait
Use this mode for taking pictures of people.
Gives your subject a bright, healthy look.
0 Half-length Portrait
Use this mode for taking pictures of people from the chest up. (p.66)
a C Kids
Ideal for taking pictures of children who are moving around. Gives your subject a bright,
51
b Sport
Ideal for taking fast-moving action shots. The camera keeps the moving subject in focus until the shutter release button is pressed.
3 c i Surf & Snow
For capturing images with dazzling backgrounds, such as beaches or snowy
d E Pet
Ideal for taking pictures of pets. The camera keeps the moving pet in focus until the shutter release button is pressed. You can select settings according to the color of your pet’s
e B Text
Use this mode to take clear pictures of text.
You can change the image to black and white
f D Food
Use this mode for taking pictures of food. The increased saturation gives pictures a bright,
g 4 Digital SR (Blur Reduction)
Use this mode to take pictures indoors or in low light conditions. The camera reduces camera shake by increasing shutter speed
52
h Y Frame Composite
Use this mode to take pictures with a frame.
The number of recorded pixels is fixed at h .
Face Recognition
Face Recognition activates in b (Auto Picture mode), (Portrait mode), z (Natural Skin Tone mode), (Half-length Portrait mode) and
C (Kids mode).
This function recognizes faces, focuses, and performs exposure compensation when capturing images.
3
• If the camera cannot recognize the location of the subject’s face, the camera focuses using the normal Focusing Area (Multiple).
• The Face Recognition function may not work if the subject is wearing sunglasses, has part of the face covered, or is not looking toward the camera.
53
Playback Mode Palette
Slideshow
3
MENU Cancel OK OK
Icon s
&
Item Description
Slideshow For playing recorded images successively
Resize
Cropping
Image/
Sound Copy
Image
Rotation
For changing the size and quality level of images
For cropping images and saving them as separate images
For copying files from the built-in memory to the SD
Memory Card and vice versa
For displaying rotated still pictures
Page
Color Filter For processing images using the color filter
Digital Filter
For applying special effects such as the illustration effect or the slim effect to still pictures according to your taste
Brightness
Filter
For adjusting the brightness of images using a filter
Movie Edit For editing movies
Z
Z
Y
Red-eye
Compensation
For retouching red-eyes, a phenomenon that can happen when shooting with a flash
Voice Memo For adding a voice memo to an image
Protect
For protecting images and sounds to avoid accidental erasure
DPOF
For printing images from a DPOF compatible printer or at a printing service
Start-up
Screen
Frame
Composite
For setting the Start-up screen
For adding a decorative frame to a still picture
When you select an icon on the Mode Palette, waiting for about 3 seconds, the description for the selected mode appears.
54
Taking Pictures
Taking Pictures
Changing the Mode
In the “Capture mode”, you can take pictures. In the “Playback mode”, you can play back or delete pictures.
Switching between Capture Mode and Playback Mode
To switch from the “Capture mode” to the “Playback mode”
Press the Q Playback button.
To switch from the “Playback mode” to the “Capture mode”
Press the Q Playback button or press the shutter release button halfway.
Selecting the Capture Mode
Display the “Capture Mode Palette” and select the icon for a desired mode. ( 1
Displaying Shooting Information in Capture Mode
In the Capture mode, press the OK/Display button to switch the “display modes”. There are 5 display modes for the Capture mode.
Normal Display
Shooting information is displayed when the power is turned on.
1 Capture mode
3 Drive mode
2 Flash mode
4 Focus mode
5 Focus frame 6 Digital zoom
7 Card/Built-in memory 8 Battery indicator
9 Remaining number of recordable images
10 Date and time
12 Date icon
11 World time setting
13 Camera shake warning
14 Aperture 15 Shutter speed
1 2 3 4
15 14 13 12
5 6
11
7 8
10
9
4
55
Histogram Display
The brightness distribution of the image is displayed. The horizontal axis shows the brightness (darkest at the left end and brightest at the right end) and the vertical axis shows the number of pixels.
1 Recorded Pixels 2 Quality Level
3 White Balance
5 Sensitivity
4
6
AE Metering
Histogram
4
Grid Display
The grids divide the screen into nine parts.
These grids will help you to improve composition.
No icons
No shooting information is displayed.
• The focus frame appears in Autofocus mode.
• If any of the settings are changed, the icon of the setting appears for a few seconds.
LCD Backlight Off
The LCD monitor is turned off.
Saving the Display Mode 1
1 2 3
10
M
6 5 4
56
• If you press and hold the OK/Display button for more than 1 second, the LCD Bright Mode is activated. The LCD monitor turns brighter for a certain amount of time. (
• Under shooting conditions where camera shake is likely to occur,
(Anti-shake warning) will be displayed. Take pictures with the camera secured on a tripod or other stable surface.
• All the camera buttons function as usual even when the LCD backlight is off. Press the shutter release button to take pictures as usual.
Using Histogram
A histogram is a graph showing the brightness of an image on the horizontal axis and the number of pixels on the vertical axis (distribution chart of the brightness). The histogram will help you detect the brightness of the image you have taken. For instance, the graph peak tends to appear on the left side for a darker image, and the graph peak tends to appear on the right side for a
(Dark)
Brightness
(Bright) brighter image.
In general, when the exposure metering of your image is well-balanced, the graph peaks tend to appear in the middle.
On the contrary, when the exposure metering of the subject is imbalanced, that is with dark areas and/or bright areas, the peaks will appear on the sides rather than in the middle.
Dark Neutral Bright
4
57
Shutter release button
4
Taking Pictures Using the Shake Reduction Function
“Camera shake” occurs when you jiggle your hands while taking pictures.
“Blurring” is likely to occur when you take pictures of moving subject. This camera features image compensation systems and functions that work for both “camera shake” and “blurring”. Enjoy taking still pictures and movies without worrying about image blur.
Digital SR mode
The mode allows you to set the sensitivity to maximum ISO3200. The higher shutter speed enables the reduction of both “camera shake” and
“blurring”.
“Reducing Camera Shake and Blurring in Pictures (Digital SR Mode)” 1
Movie SR function for movies
The movie anti-shake function electronically compensates for image blur.
It allows you to take smooth movies without worrying about camera shake.
“Compensating for Camera Shake While Taking Movies (Movie SR)” 1
58
Shutter release button
Green button
Taking Pictures in the Basic Mode (Green Mode)
In the Green Mode, you can enjoy easy picture taking just by pressing the shutter release button.
1
Press the Green button in Capture mode.
36
The camera enters the Green Mode.
Press the Green button again to return to the previous status.
2
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
3
Press the shutter release button fully.
The picture is taken.
4
• In the Green Mode, you cannot change the information displayed on the LCD monitor by pressing the OK/Display button.
• In the Green Mode, you cannot display the [ A Rec. Mode] menu or the Capture Mode Palette. If you try to show them, the message
[Green mode must be canceled to use this function.] and (key lock icon) appear.
• When the camera switches from the Green Mode to Playback
Mode, you cannot display the [ H Set-up] menu by pressing the
MENU button. If you try to show it, the message [Green mode must be canceled to use this function.] and (key lock icon) appear.
• When the camera is turned off in the Green Mode, it starts up in the Green Mode next time you turn on the camera.
59
You can assign other functions to the Green button. ( 1
4
The list below shows the settings for the Green Mode.
Flash mode
Drive mode
Focus mode
The default is , (Auto). a (Flash Off) can be selected.
The default is P (Standard). g (Self-timer) can be selected.
The default is = (Standard). q (Macro mode) or 3 (Pan focus) can be selected.
Recorded Pixels
Quality level
White Balance
Focusing Area
Focus Limiter
Aux. AF Light
AE Metering
Sensitivity
10
M
D (Better)
F (Auto)
J (Multiple)
O
O
(On)
(On)
[ (Multi-segment)
Auto
EV Compensation ± 0.0
Digital Zoom O (On)
Instant Review
Sharpness
Saturation
Contrast
0.5sec
(Standard)
(Standard)
(Standard)
Date Imprint P (Off)
60
Shutter release button
Four-way controller
OK button
Taking Pictures Automatically (Auto Picture Mode)
In b (Auto Picture mode), the camera selects the most appropriate capture mode from (Normal mode), A (Night Scene mode), q
(Landscape mode) and (Portrait mode) just by pressing the shutter release button.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select b (Auto
Picture mode).
3
Press the OK button.
Auto Picture
4
MENU Cancel
4
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus, and the selected mode icon will appear on the top left of the LCD monitor.
5
Press the shutter release button fully.
The picture is taken.
Taking Still Pictures 1
1/160
OK OK
36
08/26/2007
12:00
61
4
• In Auto Picture mode, the exposure is fixed to ±0.0. ( 1
• When the camera selects Portrait mode, “Face Recognition AF” and “Face Recognition AE” are activated. When you point the camera at your subject’s face, the camera automatically recognizes it, adjusting focus and exposure to take a high-quality picture. ( 1
62
Shutter release button
Four-way controller
OK button
Setting the Functions (Program Mode)
In R (Program mode), the camera automatically sets the shutter speed and aperture for taking still pictures. However, you can select other functions such as the Flash Mode or Continuous Shooting mode.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select R (Program mode).
3
Press the OK button.
Program
4
Set the functions you want to use.
MENU Cancel
Refer to “Setting the Shooting Functions”
(p.87 - 115) for details of how to set the functions.
5
Press the shutter release button halfway.
OK OK
The focus frame on the LCD monitor will light green when the camera is in focus.
6
Press the shutter release button fully.
The picture is taken.
4
Taking Still Pictures 1
63
Shutter release button
Four-way controller
OK button
4
Selecting the Picture Mode According to the
Shooting Scene (Picture Mode)
You can select the Picture mode according to the shooting scene. There are 11 available modes in Picture mode.
q Landscape
<
Flower z
Natural Skin
Tone
Portrait
Lets you capture the natural colors of landscape views.
Lets you take brightly colored flower pictures.
Lets you take pictures with the soft flash to produce beautiful skin tones.
Lets you take portraits with spatial effect, by emphasizing the person.
Half-length
Portrait
Ideal for taking pictures of people from the chest up.
L
Kids
Sport
Surf & Snow
E Pet
Text
Ideal for taking pictures of moving children. Also gives them a healthy look.
Lets you take clear pictures of moving subjects with a high shutter speed.
Lets you take photos against dazzling backgrounds like beaches or snow-covered mountains.
Lets you take clear pictures of pets to fit their hair color.
Lets you take clear pictures of text or writing. Also lets you turn colored text black/white or reverse color.
K Food Lets you take appetizing pictures of prepared food.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
Auto Picture
MENU Cancel OK OK
64
2
Use the four-way controller ( 2345 ) to select a desired mode.
For example, select q (Landscape mode).
3
Press the OK button.
4
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
5
Press the shutter release button fully.
The picture is taken.
Landscape
MENU Cancel OK
Picture modes
OK
In Picture modes, Saturation, Contrast, Sharpness, White Balance and AE Metering are automatically set to their default settings. You cannot change these settings.
4
65
Shutter release button
Four-way controller
OK button
4
Taking Pictures of People (Natural Skin Tone Mode/Portrait
Mode/Half-length Portrait Mode)
In z (Natural Skin Tone mode), (Portrait mode) and (Half-length
Portrait mode), “Face Recognition AF” and “Face Recognition AE” are activated. When you point the camera at your subject’s face, the camera automatically recognizes it, adjusting both focus and exposure.
z
Natural Skin
Tone
Portrait
Lets you take pictures with the soft flash for more beautiful skin tones.
Lets you take portraits with spatial effect, by emphasizing the person.
Half-length
Portrait
Lets you take more beautiful half-length portraits.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select
(Natural Skin Tone mode).
If the (Portrait mode) or (Half-length Portrait mode) icons are displayed, select one and press the OK button.
3
Press the OK button.
The selected icon is displayed.
MENU OK
66
4
Press the four-way controller ( 23 ) to select
(Portrait mode), z (Natural Skin Tone mode) or (Halflength Portrait mode).
5
Press the OK button.
The camera is ready for taking pictures in the selected mode.
When the camera recognizes the subject’s face, a yellow focus frame appears on it.
The position and the size of the frame change while the camera continues to adjust the focus on the moving subject.
6
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
7
Press the shutter release button fully.
The picture is taken.
• If the camera cannot recognize the subject’s face, the camera focuses using the Focusing Area (Multiple).
• Only the selected mode icon and the focus frame appear on the
LCD monitor. No other shooting information is displayed. You cannot change the display mode by pressing the OK/Display button.
• “Face Recognition AF” and “Face Recognition AE” may not work if the subject’s face is partly covered, for example, with sunglasses, or when the subject does not face the camera.
• The AE metering mode is fixed to Multi-segment.
• When you select Auto Picture mode and the camera automatically switches to Portrait mode, “Face Recognition AF” and “Face
Recognition AE” are activated.
• Software rendering is ineffective when the face recognition
function (p.53) does not operate in Natural Skin Tone mode.
• Red-eye reduction is automatically performed when using Facial
Recognition in Natural Skin Tone mode, Portrait mode, or Half-
Length Portrait mode with the flash mode set to Auto or Flash On.
• The recordable image size is fixed to h in Half-Length Portrait mode.
4
67
Shutter release button
Four-way controller
OK button
4
Taking Pictures of Kids (Kids Mode)
C (Kids mode) is ideal for taking pictures of moving children. Also gives them a healthy look. “Face Recognition AF” and “Face Recognition AE” are activated. When you point the camera at your subject’s face, the camera automatically recognizes it, adjusting both focus and exposure.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select C (Kids mode).
K i d s
68
MENU Cancel OK OK
3
Press the OK button.
When the camera recognizes the subject’s face, a yellow focus frame appears on it.
The position and the size of the frame change while the camera continues to adjust the focus on the moving subject.
4
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
5
Press the shutter release button fully.
The picture is taken.
• Only the selected mode icon and the focus frame appear on the
LCD monitor. No other shooting information is displayed. You cannot change the display mode by pressing the OK/Display button.
• “Face Recognition AF” and “Face Recognition AE” may not work if the subject’s face is partly covered, for example, with sunglasses, or when the subject does not face the camera.
• The AE metering mode is fixed to Multi-segment.
• The automatic tracking AF function is activated. The camera continues to adjust the focus on the moving subject even after you press the shutter release button halfway.
• Red-eye reduction is automatically performed when using Facial
Recognition in Kids mode with the flash mode set to Auto or Flash
On.
4
69
Shutter release button
Four-way controller
OK button
Taking Pictures of Sports and Leisure Activities (Sport Mode/Surf
& Snow Mode)
4 Sport Lets you take pictures of fast moving subjects.
i Surf & Snow
Lets you take photos against dazzling backgrounds like ocean beaches or ski slopes.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select
(Sport mode).
When i (Surf & Snow mode) is previously selected, is displayed on the Mode Palette. Select (Surf & Snow mode) then.
3
Press the OK button.
The selected icon is displayed.
MENU OK
4
Press the four-way controller
( 23 ) to select (Sport mode) or i (Surf & Snow mode).
70
5
Press the OK button.
The camera is ready for taking pictures in the selected mode.
6
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
7
Press the shutter release button fully.
The picture is taken.
• “Face Recognition AF” and “Face Recognition AE” do not work.
• The fixed settings for the EV Compensation, White Balance, AE
Metering, Saturation, Contrast, and Sharpness for each mode are permanent and cannot be changed.
• In the Sports mode, the flash cannot be used, the AF light is off, and the AF area tracking is set, but these settings can be changed.
4
71
Shutter release button
Four-way controller
OK button
4
Taking Pictures of Your Pet (Pet Mode)
In E (Pet mode), you can take pictures that show natural hair color of your pet. Select the appropriate icon depending on what color your pet is (closer to black or white or in between).
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select E (Pet mode).
3
Press the OK button.
The screen for selecting the pet mode appears.
4
Use the four-way controller ( 23 ) to select E , F , F , H , G or G .
There are two types of pet icon; dogs’ and cats’.
Selecting either the cat or dog icon does not affect the resulting picture. Select whichever you prefer.
5
Press the OK button.
MENU OK
The desired Pet mode is selected and the camera is ready for taking pictures.
6
Press the shutter release button halfway.
The focus frame turns green when the subject is in focus.
7
Press the shutter release button fully.
The picture is taken.
When you select Pet mode or Sport mode, the automatic tracking
AF function is activated and the camera continues to adjust the focus on the moving subject even after the shutter release button is pressed halfway.
72
Taking Pictures of Text (Text Mode)
This mode allows you to take clear pictures of written text. This is convenient for capturing a digital copy of an important document or enhancing legibility of small print.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select
(Text mode).
3
Press the OK button.
The screen for selecting the Text mode appears.
4
MENU Cancel OK
4
Use the four-way controller ( 23 )
Color
Neg. Color
B&W
Neg. B&W
Maintains original colored text.
Reverses colored text.
Turns colored text black/white.
Reverses black/white text.
Press the four-way controller ( 45 ) to adjust the contrast.
5
Press the OK button.
The desired text mode is selected and the camera is ready for taking pictures.
6
Press the shutter release button halfway.
The focus frame turns green when the subject is in focus.
7
Press the shutter release button fully.
The picture is taken.
73
Shutter release button
Four-way controller
OK button
4
Taking Pictures of Dark Scenes
(Night Scene Mode)
You can take pictures of dark scenes, such as nightscapes, with the appropriate settings.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select A (Night Scene mode).
3
Press the OK button.
4
Press the shutter release button halfway.
MENU
Night Scene
Cancel OK OK
The focus frame on the LCD monitor will light green when the camera is in focus.
5
Press the shutter release button fully.
The picture is taken.
Total recording time will be longer when the picture is taken at slower shutter speed (approximately 1/4 second or slower), because the noise reduction function is activated to reduce noise.
The shutter speed becomes slower when taking pictures of dark scenes. The camera shake is likely to occur under such condition.
Take pictures with the camera secured on a tripod or other stable surface to prevent it from shaking.
74
Shutter release button
Four-way controller
OK button
Reducing Camera Shake and Blurring in Pictures
(Digital SR Mode)
(Digital SR) mode allows you to set the sensitivity higher than other modes to reduce camera shake and blurring. Shutter speed and aperture are set automatically according to the sensitivity value you set.
Use the mode under the shooting conditions that camera shake or blurring tend to occur.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select (Digital SR mode).
3
Press the OK button.
4
Press the shutter release button halfway.
MENU
Digital SR
Cancel OK OK
The focus frame on the LCD monitor will light green when the camera is in focus.
5
Press the shutter release button fully.
The picture is taken.
4
• The recorded pixels are fixed to 5M and cannot be changed.
• In Digital SR mode, the sensitivity can now be set to 3200. When using the auto settings, sensitivity is automatically set within a range of 64 to 1600. ( 1
75
Shutter release button
Zoom button
Four-way controller
OK button
4
Taking Movies (Movie Mode)
This mode enables you to take movies with sound.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select C (Movie mode).
Movie
3
Press the OK button.
The following shooting information appears on the LCD monitor and the camera is ready for taking movies.
1 Movie mode icon 2 Flash Off icon
3 Card/Built-in memory 4 Recordable time
5 Movie SR On
4
Press the shutter release button.
Shooting starts. Press the zoom button to change the size of the subject using Digital
Zoom.
Zoom button ( x
) : Enlarges the subject.
Zoom button ( w ): Diminishes the subject.
5
Press the shutter release button.
Shooting ends.
MENU Cancel
1 2
5
3
OK OK
4
76
Keeping the Shutter Release Button Pressed
If you keep the shutter release button pressed for more than one second, the movie will be taken for as long as you keep the button pressed.
Shooting stops when you take your finger off the shutter release button.
• The followings are not available in Movie mode.
- Flash
- Continuous Shooting
- Operating with a remote control unit
- Optical zoom and Intelligent Zoom (Available before shooting starts.)
• Set Movie SR to Off in [ A Rec.Mode] menu to use Digital Zoom in Movie mode. ( 1
• The Focusing Area is fixed to Spot, and the Focus Limiter and the auxiliary AF light are set to Off in Movie mode. When Focus Mode is set to Standard (Autofocus), Macro, or Super Macro, the AF operation is performed once right before starting taking a movie.
• You can continuously record a movie until its file size reaches 2
GB on a high-capacity SD Memory Card.
Playing Back Movies
4
77
Shutter release button
Four-way controller
OK button
Green button
4
Taking Pictures in Frame Composite Mode
You can take pictures with a decorative frame added using the Frame
Composite function. There are three frames already stored in the camera.
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select Y
(Frame Composite).
Frame Composite
3
Press the OK button.
The frame selection screen appears.
4
Use the four-way controller ( 45 ) to select a frame.
5
Press the OK button.
The subject appears in the selected frame.
6
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
MENU Cancel OK OK
OK
78
7
Press the shutter release button fully.
The picture is taken.
• The Recorded Pixels is fixed to 3M, and cannot be changed to any other size.
• Continuous Shooting is not possible in Frame Composite mode.
To Register a New Frame
To switch to the screen for registering a frame, press the Green button in Step 3. You can register frames which you have downloaded from the internet, etc. When you register a new frame, it replaces one of the existing frames in the built-in memory. Before you register a new frame, copy it to the SD Memory Card.
When a new frame on the SD Memory Card is registered in the builtin memory, it replaces one of the existing frames in the built-in memory. The replaced frame is deleted from the built-in memory.
1
In the frame selection screen, select the frame you want to remove and press the Green button.
A message appears and the frames on the SD Memory Card that you can register in the built-in memory appear.
2
Use the four-way controller ( 45 ) to select the frame you want to register and press the OK button.
The frame is registered in the built-in memory instead of the frame selected in Step 1.
4
79
Shutter release button
Four-way controller
OK button
4
Using the Self-timer
In self-timer mode, the picture is taken ten seconds or two seconds after the shutter release button is pressed.
1
Press the four-way controller ( 2 ) in Capture mode.
2
Press the four-way controller
( 45 ) to select g (Self-timer) or
(2 sec. Self-timer).
3
Press the OK button.
The camera is ready for taking pictures using the Self-timer.
MENU
4
Press the shutter release button halfway.
OK
The focus frame on the LCD monitor will light green when the camera is in focus.
5
Press the shutter release button fully.
The self-timer starts running.
g (Self-timer) : The picture is taken after the self-timer lamp lights for about seven seconds, then blinks for about three seconds.
(2 sec. Self-timer): The picture is taken after the self-timer lamp blinks for about two seconds.
Focusing may be compromised if you move the camera while the self-timer is running.
• The countdown appears on the LCD monitor when you press the shutter release button.
• If you press the shutter release button halfway during a countdown, the countdown stops. Press the shutter release button fully to restart the countdown.
Troubleshooting “Subject is not in focus” 1
80
Shutter release button
Four-way controller
OK button
Continuous Shooting
(Continuous Shooting Mode)
You can switch the Drive mode to [Continuous Shooting] mode. Pictures are taken continuously while the shutter release button is pressed.
1
Press the four-way controller ( 2 ) in Capture mode.
2
Press the four-way controller
( 45 ) to select j (Continuous
Shooting).
3
Press the OK button.
The camera is ready for continuous shooting.
4
Press the shutter release button halfway.
MENU OK
The focus frame on the LCD monitor will light green when the camera is in focus.
5
Press the shutter release button fully.
Pictures are taken continuously while pressing the shutter release button.
Shooting stops when you release the shutter release button.
4
81
4
• You can continue shooting until the SD Memory Card or the builtin memory is full.
• The interval will vary depending on the Recorded Pixels and
Quality Level settings.
• Under the following conditions, the continuous shooting interval becomes longer.
- When the sensitivity is 1600
- When using Intelligent Zoom
- When using Digital SR mode, Natural Skin Tone mode, Half-
Length Portrait mode, or Night mode
- When using Date Imprint
• The flash will not discharge in Continuous Shooting mode.
• Continuous shooting is not available in Movie and Frame
Composite mode.
• The focus, exposure and white balance are determined in the first frame.
82
Four-way controller
OK button
Shutter release button
Zoom button
Remote control unit E
(Remote control unit F has no zoom button.)
Using the Remote Control Unit (optional)
You can switch the Drive Mode to Remote Control mode to take pictures using the remote control unit E or F (optional).
4
Taking Pictures Using the Remote Control
1
Press the four-way controller ( 2 ) in Capture mode.
2
Press the four-way controller
( 45 ) to select i (Remote control) or h (0 sec remote control).
3
Press the OK button.
MENU OK The self-timer lamp blinks slowly and the camera is ready for taking pictures.
4
Press the shutter release button on the remote control unit.
i (Remote control) : The picture is taken after the self-timer lamp blinks quickly for about three seconds.
h (0 sec remote control): The picture is taken immediately.
• Focusing may be compromised if you move the camera while the self-timer lamp is blinking.
• You cannot use the remote control unit in Movie mode.
83
4
Changing the Magnification Using the Remote Control Unit
You can not only shoot images with the shutter release button, but also change the zoom magnification with the zoom button using the remote control unit E (optional).
1
Press the four-way controller ( 2 ) in Capture mode.
2
Press the four-way controller ( 45 ) to select i (Remote control) or h (0 sec remote control).
The function is same either in i (Remote control) or h (0 sec remote control).
3
Press the zoom button on the remote control unit.
Each time you press the zoom button, the zoom position will change among tele, middle, and wide.
You cannot change the zoom magnification with the remote control unit in Super Macro mode. You can change it in Macro mode.
• The buttons on the camera can be used in the normal way.
• Be sure that the remote control unit is no more than about four meters away from the front of the camera.
• When operating with the remote control unit, only the optical zoom is available. Digital Zoom and Intelligent Zoom are not available with the remote control unit.
Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTAX customer service center if the battery needs changing. (A charge is made for changing the battery.)
84
Shutter release button
Zoom button
Four-way controller
MENU button
Using Zoom to Change the Subject Size
The camera allows you to zoom in the subject at distance or zoom out to capture the expansive scenery.
1
Press the zoom button in Capture mode.
Zoom button ( w ) : Diminishes the subject
(Wide).
Zoom button ( x ) : Enlarges the subject
(Tele). When you press and hold the button, the camera automatically switches from optical zoom to
Intelligent Zoom, and
Intelligent Zoom to
Digital Zoom.
Zoom bar
Zoom ratio
4
The zoom bar is displayed as follow.
Zoom in with high image quality.
Zoom in with some degree of image deterioration.
Optical zoom range* 1
Digital Zoom range
*1 You can zoom in maximum 3× optically.
*2 The Intelligent Zoom range differs depending on the recorded pixels.
See the following table.
Intelligent
Zoom range*
2
85
Recorded pixels and zoom ratio
Recorded pixels
Optical Zoom Range Intelligent Zoom
10M
7M
5M
3M
2M
1024
640
1× to 3×
1× to 3×
1× to 3×
1× to 3×
1× to 3×
1× to 3×
1× to 3×
3.6×
3.6× to 4.2×
3.6× to 5.3×
3.6× to 6.7×
3.6× to 10.4×
3.6× to 16.3×
Digital Zoom Range
3.6× to 16.3×
4.2× to 16.3×
5.3× to 16.3×
6.7× to 16.3×
10.4× to 16.3×
14.3× to 16.3×
4
• Intelligent Zoom is not available under the following conditions.
- When Digital Zoom is set to Off.
- When the recorded pixels is 10M. (3× optical zoom and digital zoom available.)
- In Digital SR Mode or Movie mode
• The image enlarged using Intelligent Zoom may appear rough on the LCD monitor. This does not affect the quality of image.
• Only the Digital Zoom is available in Movie mode. Set Movie SR to Off in [ A Rec.Mode] menu to use the Digital Zoom in Movie mode. ( 1
Setting the Digital Zoom
The [Digital Zoom] is set to [ O (On)] by default. To take pictures using only the optical zoom, set the [Digital Zoom] to [ P (Off)].
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Digital Zoom].
3
Use the four-way controller ( 45 ) to select [ O (On)/ P (Off)].
4
Press the shutter release button halfway.
The camera is ready for taking pictures.
Rec. Mode
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
±0.0
Saving the Digital Zoom Function Setting 1
86
Setting the Shooting Functions
Four-way controller
OK button
Selecting the Focus Mode
Focus Mode
= q
Standard
(Autofocus mode)
Macro mode r Super Macro mode
The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway.
Use this mode when the distance to the subject is more than approx. 35 cm (16 in.).
This mode is used when the distance to the subject is approx. 12 cm – 40 cm (4.7 in. – 16 in.). The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is approx. 6 cm – 15 cm (2.3 in. – 5.9 in.). The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway.
Pan Focus mode
This mode is used when shooting close and distant subjects together or the subject is hard to focus on.
You can adjust the focus on a subject in the following ranges.
When taking still pictures: approx. 2.3 m (7.55 ft.) –
∞
(full wide-angle), approx.
∞
(full telephoto) 9.3 m (30.51 ft.) –
When taking movies: approx. 0.9 m (2.95 ft.) –
3.7 m (12.14 ft.) –
∞
(full wide-angle), approx.
∞
(full telephoto) s Infinity mode This mode is used for taking distant objects.
z Manual Focus mode Adjust the focus manually with the four-way controller.
Saving the Focus Mode 1
4
87
1
Press the four-way controller ( 5 ) in Capture mode.
2
Press the four-way controller
( 23 ) to select the focus mode.
3
Press the OK button.
The camera is ready for taking pictures in the selected focus mode.
MENU OK
4
Auxiliary AF light
• The auxiliary AF light may be activated under low lighting in Autofocus mode.
• The auxiliary AF light of this camera conforms to the safety standard
(IEC60825-1) for Class 1 LED product. Looking at the light directly will not create safety hazard. However, do not look into the emitter from a very short distance since you may feel dazzled.
• The default setting is Standard (Autofocus).
• The zoom is fixed at the full wide-angle in Super Macro mode.
• When Focus Mode is set to Standard (Autofocus), Macro, or Super
Macro in Movie mode, the AF operation is performed once just before starting to take the movie.
Manual Focus
In MF (Manual Focus) mode, press the OK button to enlarge the central portion of the image full screen for focus adjustment. Press the four-way controller ( 23 ) to adjust the focus while watching the indicator.
Four-way controller ( 2 ): Focuses farther.
Four-way controller ( 3 ): Focuses closer.
MENU
Indicator
OK
88
After you determine the focus point, press the
OK button to set the focus position and return to the normal capture screen.
Press the four-way controller ( 5 ) to readjust the focus position.
• When focusing, hold down the four-way controller ( 23 ) to focus quickly.
• When you use Manual Focus in Movie mode, adjust the focus right before starting taking a movie. You cannot adjust the focus while taking the movie.
• To change Focus Mode from Manual Focus to another one, press the four-way controller ( 5 ) while the indicator is displayed on the
LCD monitor.
4
89
Four-way controller
OK button
4
Selecting the Flash Mode
Flash Mode a b c d
Auto
Flash Off
Flash On
Auto + Red-eye
Flash On
+ Red-eye b Soft Flash
The flash discharges automatically depending on the light conditions.
The flash will not discharge, regardless of the brightness.
Use this mode to take pictures at dusk or in museums etc. where flash photography is prohibited.
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject’s eyes.
The flash discharges automatically.
This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject’s eyes.
The flash will discharge regardless of lighting conditions.
This mode reduces the intensity of the flash so that the flash is not too bright even when fired at close range. The flash will discharge regardless of the light conditions.
• The Flash Mode is fixed to Flash Off under the following conditions.
- In Movie mode
- In Continuous Shooting
- When Focus Mode is set to Infinity mode
• The picture is taken when the last flash is discharged after the preflash. (The interval between the flashes is longer when using the red-eye reduction function.)
90
1
Press the four-way controller ( 4 ) in Capture mode.
2
Use the four-way controller ( 23 ) to select the flash mode.
3
Press the OK button.
MENU OK
The camera is ready for taking pictures in the selected flash mode.
Saving the Flash Mode 1
• Using the flash in Macro mode may cause the image to be overexposed.
• The flash is automatically set to Off in Super Macro mode; however you can still select the desired flash mode.
• Firing the flash in Super Macro mode causes vignetting in the bottom left corner of the image.
• The shutter speed becomes slower when taking pictures with the flash in Night Scene mode. We recommend placing the camera on a tripod or other stable surface.
• Red-eye reduction is automatically performed when using Facial
Recognition in Natural Skin Tone mode, Portrait mode, or Half-
Length Portrait mode with the flash mode set to Auto or Flash On.
(This is the same for Portrait in Auto Picture mode.)
4
91
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
4
Selecting the Recorded Pixels of Still Pictures
Select the number of the recorded pixels for still images according to how the images will be used.
The larger the number of recorded pixels, the higher the quality of images, but the file size becomes larger. The selected Quality Level also affects the size of the image file (
Number of Recorded Pixels
10M (3648×2736)
7M (3072×2304)
5M (2592×1944)
3M (2048×1536)
2M (1600×1200)
1024 (1024×768)
640 (640×480)
For printing images with high-resolution settings in your printer, printing at A4 size or larger, or editing and processing images
For printing at postcard size
For using as images on websites, or attaching images to e-mails
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Recorded Pixels].
3
Press the four-way controller ( 5 ).
The pull-down menu appears.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
92
4
Use the four-way controller ( 23 ) to change the recording pixels.
The number of shots for the selected recording pixels appears.
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
10
M
7
M
5
M
2
M
1024 AE Metering
Sensitivity
MENU Cancel OK OK
• Selecting a large size produces a clear picture when it is printed out.
• The Recorded Pixels setting is saved when the camera is turned off.
• The Intelligent Zoom range differs depending on the selected recorded pixels. ( 1
Image Size and Quality of Still Pictures
4
93
4
Shutter release button
Four-way controller
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
MENU button
Selecting the Quality Level of Still Pictures
Select the quality (data compression ratio) for still images according to how the images will be used.
The more E ’s, the higher the quality of the image, but the file size becomes larger. The selected Recorded Pixels also affects the size of the image file ( 1
Quality Levels
C
Best
D Better
Lowest compression ratio. Suitable for photo prints.
Standard compression ratio. Suitable for viewing the image on a computer screen.
E Good
Highest compression ratio. Suitable for attaching to e-mails or creating websites.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Quality Level].
Rec. Mode
3
Press the four-way controller ( 5 ).
The pull-down menu appears.
Recorded Pixels
Quality Level
White Balance
AF Setting
10
M
AWB
AE Metering
Sensitivity AUTO 800
MENU Exit
94
4
Use the four-way controller ( 23 ) to change the quality level.
The number of shots for the selected quality level appears.
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
109
MENU Cancel
10
M
AWB
AUTO 800
OK OK
The Quality Level setting is saved when the camera is turned off.
Image Size and Quality of Still Pictures
4
95
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
4
Adjusting the White Balance
The light condition of the shooting location affects the overall color tone of pictures. Adjust the white balance to reproduce the natural color of the subject.
White Balance
F
G
H
Auto
Daylight
Shade
I
Tungsten Light
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Use this mode when taking pictures outside in the shade.
Use this mode when taking pictures under electric or other tungsten light.
J
Fluorescent
Light
Use this mode when taking pictures under fluorescent light.
K
Manual
Adjusts the white balance manually. Use this mode to reproduce colors more accurately or in the shooting locations with mixed light sources.
Set another white balance if you are not satisfied with the color balance of pictures taken with white balance set to AWB (Auto).
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [White
Balance].
3
Press the four-way controller ( 5 ).
White Balance
The White Balance screen appears.
4
Use the four-way controller ( 23 ) to change the setting.
MENU OK
96
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
Saving the White Balance 1
Manual Setting
Place a white material such as a piece of white paper in front of your camera to adjust white balance.
1
Select K (Manual) on the White
Balance screen.
2
Point the camera at the white material so that it fills the screen.
3
Press the Green button.
White Balance
MENU
The white balance is automatically adjusted. [Complete] appears on the LCD monitor.
4
Press the OK button.
OK
The setting now adjusted is saved and the screen returns to the
[ A Rec.Mode] menu.
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
4
97
4
Shutter release button
Four-way controller
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
Selecting the Autofocus Settings
You can set the autofocus area and focusing method.
1
Press the MENU button in Capture mode.
The [ A Rec. Mode] menu appears.
2
Use the four-way controller ( 23 ) to select
[AF Setting].
3
Press the four-way controller ( 5 ).
AF Setting
The AF Setting screen appears.
Focusing Area
Focus Limiter
Aux. AF Light
MENU
Changing the Focusing Area
You can change the autofocus area (Focusing Area).
Focusing Area
J Multiple
K Spot
Automatic tracking
AF
The camera measures a wide range in the center of the monitor (within the focusing area) and focuses on the nearest subject.
The camera measures a narrow range in the center of the monitor (the spot focusing area) making easier for you to focus on a specific subject.
The camera continues to focus on the moving subject while you are pressing the shutter release button halfway.
98
4
Press the four-way controller ( 5 ).
The pull-down menu appears.
5
Use the four-way controller ( 23 ) to change the
Focusing Area.
6
Press the shutter release button halfway.
The camera is ready for taking pictures.
Saving the Focusing Area Setting
Setting the Focus Limiter
You can limit the focusing range of the lens in accordance with the shooting conditions.
When you set the [Focus Limiter] to [On], the focusing range of the lens is limited to the long range side for normal shooting, and to the close-up side for macro shooting. You can adjust the focus on the subject quickly.
4
Use the four-way controller ( 23 ) to select [Focus Limiter].
5
Use the four-way controller ( 45 ) to select [ O (On)/ P (Off)].
6
Press the shutter release button halfway.
AF Setting
Focusing Area
Focus Limiter
Aux. AF Light
MENU
The camera is ready for taking pictures.
4
99
4
Setting the Auxiliary AF Light
The auxiliary AF light is convenient when you shoot a dark subject. This helps you to focus on the subject under the conditions that the auto focus does not work properly.
4
Use the four-way controller ( 23 )
AF Setting to select [Aux. AF Light].
5
Use the four-way controller ( 45 ) to select [ O (On)/ P (Off)].
6
Press the shutter release button
Focusing Area
Focus Limiter
Aux. AF Light
MENU halfway.
The camera is ready for taking pictures.
The auxiliary AF light of this camera conforms to the safety standard
(IEC60825-1) for Class 1 LED product. Looking at the light directly will not create safety hazard. However, do not look into the emitter from a very short distance since you may feel dazzled.
The camera does not emit the AF light under the following conditions.
- In Movie mode
- In Landscape mode (The AF light is available if you set Aux. AF
Light to On.)
- When Focus Mode is set to Pan Focus, Infinity or Manual Focus.
- When Focusing Area is set to Automatic tracking AF.
100
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
Setting the Light Metering Mode to Determine the
Exposure
You can select which part of the screen to use to measure the brightness and determine the exposure.
AE Metering Modes
L Multi-segment The exposure is determined by the entire screen.
M Center-weighted The exposure is determined mainly by the center of the screen.
N Spot
The exposure is determined by the small area in the center of the screen only.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [AE Metering].
3
Press the four-way controller ( 5 ).
The pull-down menu appears.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
4
Use the four-way controller ( 23 ) to change the AE metering mode.
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Cancel
10
M
AWB
AUTO 800
10
M
AWB
Auto
OK OK
Saving the AE Metering Mode 1
4
101
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
4
Setting the Sensitivity
Sensitivity (ISO sensitivity) is a value indicating how much the CCD senses light. Low value equals low sensitivity, and high value equals high sensitivity. Sensitivity can be adjusted according to the shooting situations.
Sensitivity
AUTO
AUTO800 (64 - 800) is selected by default. (In Digital SR mode,
AUTO1600 (64 - 1600) is selected by default.)
You can also set ISO Correction in AUTO to 64 - 100, 64 - 200, 64 - 400,
64 - 800 or 64 - 1600. (In Digital SR mode, 64 - 3200 is also selectable.)
64
100
200
400
800
At lower sensitivity, images are sharper and noise is reduced, but the shutter speed will be slower under dark conditions.
At higher sensitivity, the shutter speed will be higher, but image noise will increase.
(In Digital SR mode, 3200 is also selectable.)
1600
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Sensitivity].
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
102
3
Press the four-way controller ( 5 ).
The pull-down menu appears.
4
Use the four-way controller ( 23 ) to select the sensitivity.
To show [1600] ([1600] and [3200] in Digital
SR mode) on the pull-down menu, press the four-way controller ( 3 ) when [800] is highlighted.
Selecting the Sensitivity
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
Selecting the Sensitivity and ISO Correction Range
5
Select [AUTO] and press the four-way controller ( 5 ).
Rec. Mode
The ISO Correction in AUTO range selection screen appears.
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
6
Press the four-way controller
( 2345 ) to select a range.
7
Press the shutter release button halfway.
The camera is ready for taking pictures.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Cancel
MENU Cancel
64
200
400
10
M
64
200
400
OK OK
OK OK
ISO Correction in AUTO
ISO64-100
ISO64-200
ISO64-400
ISO64-800
ISO64-1600
Corrects sensitivity automatically in the range of ISO 64 to 800
MENU Cancel OK OK
Saving the Sensitivity
• The sensitivity for Movie mode is fixed to Auto. The setting cannot be changed.
• Even if you set Sensitivity to Off in Memory, the selected range for
ISO Correction in AUTO is saved when the camera is turned off.
The selected sensitivity will be saved only when you set Sensitivity to On in Memory.
4
103
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
4
Setting the Exposure (EV Compensation)
The overall brightness of pictures can be changed by adjusting the EV compensation value (amount of light that the CCD receives). This changes the exposure automatically determined by the camera when you want to adjust the brightness of pictures to suite your taste.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [EV Compensation].
3
Use the four-way controller ( 45 ) to change the EV setting.
Rec. Mode
EV Compensation
Movie
Digital Zoom
Instant Review
+ : Brightens the picture (overexposed).
– : Darkens the picture (underexposed).
You can select the EV setting in the range
Memory
Green Button
MENU Exit of –2.0 EV to +2.0 EV in 1/3 EV steps.
4
Press the shutter release button halfway.
The camera is ready for taking pictures.
±0.0
Saving the EV Compensation Value 1
In Auto Picture mode, the exposure is fixed to ±0.0.
104
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
Selecting the Settings for Taking Movies
You can select the recorded pixels and quality level for taking movies.
1
Press the MENU button in Capture mode.
The [ A Rec. Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Movie].
Rec. Mode
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
Green Button
±0.0
MENU Exit
3
Press the four-way controller ( 5 ).
The Movie setting menu appears.
Movie
Recorded Pixels
Quality Level
Movie SR
640
4
MENU
Selecting the Recorded Pixels of Movies
You can select the number of recorded pixels at [640 (640×480)] or [320
(320×240)]. The more pixels are selected, the larger the file size. The file size also varies depending on the quality level setting.
Recorded Pixels
640 (640×480)
You can view high-quality movies at VGA size.The recordable time is shorter.
320 (320×240) The file size is smaller and the recordable time is longer.
105
4
Press the four-way controller ( 5 ).
The pull-down menu appears.
5
Use the four-way controller ( 23 ) to select [Recorded Pixels].
The recordable time for the selected
Recorded Pixels appears.
6
Press the shutter release button halfway.
The camera is ready for taking pictures.
Movie
Recorded Pixels
Quality Level
Movie SR
Rec. time
00:11:51
MENU Cancel
Size and Quality of Movies 1
OK OK
4
Selecting the Quality Level of Movies
You can select the quality level from [ C (Best)], [ D (Better)] and
[ E (Good)]. The more E ’s, the clearer the movie appears and the larger the file size.
4
Use the four-way controller ( 23 ) to select [Quality Level].
5
Press the four-way controller ( 5 ).
The pull-down menu appears.
Movie
Recorded Pixels
Quality Level
Movie SR
640
6
Use the four-way controller ( 23 ) to select a desired quality level.
The recordable time for the selected quality level appears.
MENU
Movie
Recorded Pixels
Quality Level
Movie SR
Rec. time
00:11:51
640
Off
MENU Cancel
7
Press the shutter release button halfway.
The camera is ready for taking pictures.
Size and Quality of Movies 1
OK OK
106
Compensating for Camera Shake While Taking Movies (Movie SR)
When you set [Movie SR] to [ O (On)], the movie-anti shake function is activated.
It automatically compensates for image blur to allow you to take smooth movies.
4
Use the four-way controller ( 23 ) to select [Movie SR].
5
Use the four-way controller ( 45 ) to select [ O (On)] or [ P (Off)].
Movie
Recorded Pixels
Quality Level
Movie SR
640
MENU
4
Set Movie SR to Off to use Digital Zoom while taking movies.
107
4
Shutter release button
Four-way controller
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
Setting the Instant Review Time
You can select the Instant Review time from [Off (no display)], [0.5 sec.],
[1 sec.], [2 sec.], [3 sec.] and [5 sec.].
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Instant Review].
3
Press the four-way controller ( 5 ).
The pull-down menu appears.
Rec. Mode
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
Green Button
±0.0
MENU Exit
4
Use the four-way controller ( 23 ) to change the display time.
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
Rec. Mode
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
Green Button
3sec
1sec
0.5sec
Off
MENU Cancel OK OK
The Instant Review setting is saved when the camera is turned off.
108
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
MENU button
Setting the Green Button
You can assign one of the following functions to the Green button;
[Green Mode] (p.59) and [Fn Setting] (p.110). You can activate the
assigned function by just pressing the Green button.
Assigning a Function (Green Mode)
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Press the four-way controller
( 23 ) to select [Green Button].
3
Press the four-way controller ( 5 ).
The Green button setting screen appears.
Rec. Mode
EV Compensation ±0.0
Movie
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
4
Use the four-way controller ( 23 ) to select the function you want to register.
5
Press the shutter release button halfway.
The camera is ready for taking pictures.
Green Button
Green Mode
Fn Setting
MENU Cancel OK OK
Green Mode is registered as the default setting.
4
109
4
Registering Frequently Used Functions (Fn Setting)
You can register frequently used functions on the four-way controller.
Using this function, you can directly set the functions by pressing the four-way controller without displaying the menu in Capture mode.
In [Fn Setting], still picture mode and Movie mode have different settings.
To execute [Fn Setting] for Movie mode, press MENU button in Movie
4
Use the four-way controller ( 23 ) to select [Fn Setting].
5
Press the OK button.
The Fn Setting screen appears.
Green Button
+
+
+
+
WB
Green Mode
EV Compensation
Recorded Pixels
Quality Level
MENU Cancel OK OK
6
Use the four-way controller ( 23 ) to select a key you want to assign a function to.
7
Press the four-way controller ( 5 ).
The pull-down menu appears.
8
Use the four-way controller ( 23 ) to select a function you want to assign.
9
Press the OK button.
10
Press the shutter release button halfway.
The camera is ready for taking pictures.
Green Button
Fn Setting
+
+
+
+
WB White Balance
EV Compensation
Recorded Pixels
Quality Level
MENU
+
+
+
+
Green Button
Recorded Pixels
WB White Balance
AF
AE
ISO
Quality Level
EV Compensation
AE Metering
Sensitivity
MENU Cancel OK OK
This function is activated only when you assign the Fn Setting to the
Green button.
You can assign only one function to each key.
110
The initial settings for Fn Setting
Initial settings still picture mode
( 2 ) White Balance
( 3 ) EV Compensation
( 4 ) Recorded Pixels
( 5 ) Quality Level
Functions that can be registered on Fn Setting
Movie mode
( 2 ) White Balance
( 3 ) EV Compensation
( 4 ) Recorded Pixels
( 5 ) Quality Level
Setting items still picture mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
EV Compensation
Sharpness
Saturation
Contrast
Off
Movie mode
Recorded Pixels
Quality Level
Movie SR
White Balance
EV Compensation
Sharpness
Saturation
Contrast
Off
4
111
4
Shutter release button
Four-way controller
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
Setting the Image Sharpness
You can select whether you want the image to have sharp or soft outlines.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Sharpness].
3
Use the four-way controller ( 45 ) to adjust sharpness.
– : Softens the contours.
+ : Sharpens the contours.
4
Press the shutter release button halfway.
Rec. Mode
Sharpness
Saturation
Contrast
Date lmprint
MENU Exit
The camera is ready for taking pictures.
The Sharpness setting is saved when the camera is turned off.
112
Shutter release button
Four-way controller
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
Setting the Color Saturation
You can set the color saturation.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Saturation].
3
Use the four-way controller ( 45 ) to adjust saturation.
Rec. Mode
Sharpness
Saturation
Contrast
Date lmprint
– : Reduces the saturation.
+ : Increases the saturation.
4
Press the shutter release button halfway.
MENU Exit
The camera is ready for taking pictures.
The Saturation setting is saved when the camera is turned off.
4
113
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
4
Setting the Image Contrast
You can set the image contrast.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Contrast].
3
Use the four-way controller ( 45 ) to adjust contrast.
Rec. Mode
Sharpness
Saturation
Contrast
Date lmprint
– : Reduces the contrast.
+ : Increases the contrast.
4
Press the shutter release button halfway.
MENU Exit
The camera is ready for taking pictures.
The Contrast setting is saved when the camera is turned off.
114
Shutter release button
MENU
Four-way controller
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU Exit
10
M
AWB
AUTO 800
MENU button
Setting the Date Imprint
Set the date to be imprinted on your pictures.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Date Imprint].
3
Use the four-way controller ( 45 ) to adjust [ O (On)/ P (Off)].
4
Press the shutter release button halfway.
Rec. Mode
Sharpness
Saturation
Contrast
Date lmprint
MENU Exit
The camera is ready for taking pictures.
• The Date Imprint setting is saved when the camera is turned off.
• When Date Imprint is on, the date is also displayed in the Instant
Review screen.
• The imprinted date cannot be changed or removed after the image is taken.
4
115
Saving the Settings
4
Saving the Menu Items (Memory)
You can save the settings for the menus after turning off the camera
(Memory function).
Select [ O On] to save the setting for the menu items after turning off the camera.
Select [ P Off] to reset the setting for the menu items to the default after turning off the camera.
You can set [ O On] or [ P Off] to each menu item listed below.
The menu items for Memory
Item
Flash Mode
Description
Default
Setting
O
Drive Mode
Focus Mode
Zoom Position
MF Position
White Balance
AE Metering
Sensitivity
EV Compensation
Digital Zoom
DISPLAY
File #
The flash mode setting on the b button is saved.
The drive mode setting ( gj , etc.) selected using the four-way controller ( 2 ) is saved.
The focus mode setting on the q button is saved.
The optical zoom position setting on the zoom button is saved.
The manual focus position is saved.
The [White Balance] setting on the [ A Rec.Mode] menu is saved.
The [AE Metering] setting on the [ A Rec.Mode] menu is saved.
The [Sensitivity] setting on the [ A Rec.Mode] menu is saved.
The [EV Compensation] setting on the
[ A Rec.Mode] menu is saved.
The [Digital Zoom] setting (On/Off) on the
[ A Rec.Mode] menu is saved.
The LCD monitor display mode is saved.
The file number is saved. Even when a new SD
Memory Card is inserted, file numbers are assigned sequentially.
P
P
P
P
P
P
P
P
O
P
O
116
• The current zoom position in Intelligent Zoom or Digital Zoom will not be saved even if you set Zoom Position to On in Memory.
• Even if you set Sensitivity to Off in Memory, the selected range for
ISO Correction in AUTO is saved when the camera is turned off.
1
Press the MENU button in Capture mode.
The [ A Rec.Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Memory].
3
Press the four-way controller ( 5 ).
Rec. Mode
EV Compensation
Movie
Digital Zoom
The menu items screen appears.
Instant Review
Memory
Green Button
±0.0
MENU Exit
4
Use the four-way controller ( 23 ) to select an item.
5
Use the four-way controller ( 45 ) to select [ O (On)/ P (Off)].
6
Press the shutter release button halfway.
The camera is ready for taking pictures.
Memory
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
White Balance
MENU Cancel OK OK
4
117
Recording and Playback of Sound
Recording Sound (Voice Recording Mode)
You can record sound. The recordable time appears on the LCD monitor according to how much space is available on the SD Memory Card.
Shutter release button
Power switch
Microphone
5
1
Press the four-way controller ( 3 ) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select O (Voice
Recording).
Voice Recording
MENU Cancel
2
OK
1
OK
3
Press the OK button.
The recordable time appears on the LCD monitor.
1 Remaining recordable time
2 Recording time
4
Press the shutter release button.
Recording starts. The access lamp lights during recording.
SHUTTER REC
When the shutter release button is pressed for more than one second, recording continues for as long as the button is held down and stops when the button is released.
118
5
Press the shutter release button.
Recording stops. The remaining recordable time appears.
6
Press the four-way controller ( 3 ) to display Mode
Palette and change to another mode.
You can exit the Voice Recording mode.
• Sound is saved in WAVE monaural files.
• The microphone is located on the front of the camera. Aim the camera to obtain the best sound.
• An index can be added by pressing the MENU button during recording.
• You can record sound for a maximum of 24 consecutive hours on a high-capacity SD memory card.
5
119
Playing Back Sound
You can play back the recording you made in Voice Recording mode.
Zoom button
Playback button
Four-way controller
5
1
Press the Q Playback button in the Voice Recording mode.
2
Use the four-way controller ( 45 ) to select the recording to play back.
3
Press the four-way controller ( 2 ).
Playback starts.
Four-way controller ( 2 ) : Pauses playback.
Press again to restart playback.
If there are no recorded indexes:
Four-way controller ( 4 ) : Rewinds about five seconds.
Four-way controller ( 5 ) : Advances about five seconds.
Length of recording
If there are recorded indexes:
Four-way controller ( 4 ) : Plays back starting from the previous index.
Four-way controller ( 5 ) : Plays back starting from the next index.
Zoom button ( x ) : Increases the volume.
Zoom button ( w ) : Reduces the volume.
4
Press the four-way controller ( 3 ).
Playback stops.
120
Adding a Voice Memo
You can add a voice memo to a captured image.
Four-way controller
OK button
Recording a Voice Memo
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image to which you want to add a voice memo.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select
(Voice Memo).
4
Press the OK button.
Voice Memo
Recording starts. You can record for up to
30 seconds.
5
Press the OK button.
Recording stops.
MENU Cancel OK OK
• U appears on the screen when a voice memo is added.
• A voice memo cannot be added to an image which already has a voice memo. Delete the old voice memo and record a new one.
( 1
A voice memo cannot be added to protected ( Z ) images.
5
121
Zoom button
Four-way controller
5
Playing Back a Voice Memo
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the still picture with the voice memo that you want to play back.
If U appears on the displayed image, a voice memo has been recorded.
2
Press the four-way controller ( 2 ).
Playback starts.
Zoom button ( x ) : Increases the volume.
Zoom button ( w ): Reduces the volume.
3
Press the four-way controller ( 3 ).
Playback stops.
Deleting Voice Memos Only 1
122
Playback/Deleting/Editing
Playing Back Images
You can enjoy playback of images saved on the SD Memory Card and the built-in memory.
Shutter release button
Zoom button
Four-way controller
MENU button
Playing Back Still Pictures
Press the Q Playback button.
When an SD Memory Card is installed
?
appears in the upper right corner of the LCD monitor and the images recorded on the SD Memory Card are played back.
When no SD Memory Card is installed
@ appears in the upper right corner of the LCD monitor and the images recorded in the built-in memory are played back.
Zoom Display
You can display images magnified up to eight times.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image to magnify.
2
Press x / y on the zoom button.
Each time you press the button, the zoom scaling changes as follows: 1.3×, 2.0×, 2.6×,
4.0×, 5.3×, 8.0×. You can use the guide at the bottom left of the screen to check which portion of the image is magnified.
Guide
Four-way controller ( 2345 ) : Moves the position for magnification.
Zoom button ( x ) : Enlarges the image.
Zoom button ( w ) : Diminishes the image.
6
123
6
124
3
Press the MENU button.
Zoom playback ends.
Setting the Quick Zoom Function
You can display the image at maximum magnification simply by pressing x / y on the zoom button once during zoom playback.
1
Press the MENU button.
The [ A Rec.Mode] menu appears.
2
Press the four-way controller ( 5 ).
3
Use the four-way controller ( 23 ) to select [Quick Zoom].
4
Use the four-way controller ( 45 ) to select [ O (On)/ P (Off)].
5
Press the shutter release button halfway.
Video Out
Brightness Level
Power Saving
Quick Zoom
Auto Power Off 3min
MENU Exit
Set-up
USB Connection PC
NTSC
5sec
The camera is ready for taking pictures.
Calling Up the Images from the Built-in Memory
If you store your favorite images and sounds in the built-in memory, you can play them anytime you wish. (My album function)
You can call them up from the built-in memory with the SD Memory Card installed in the camera.
1
With the SD Memory Card installed, hold down the Q
Playback button for more than 4 seconds in Capture mode.
The lens retracts two seconds after you press the Q button. The images and sounds in the built-in memory are played back after two more seconds.
• You can play back “my album” in the same way as you play back images and sounds recorded on the SD Memory Card.
• Stop the playback of “my album” first to do the followings.
- To play back the images on the SD Memory Card.
- To copy files between the SD Memory Card and the built-in memory.
- To format an SD Memory Card or the built-in memory.
• To stop the playback of “my album”, do either of the followings.
- Press the Q Playback button or press the shutter release button halfway. The camera returns to the Capture mode.
- Turn off the camera.
Zoom button
Playback button
Four-way controller
OK button
Playing Back Movies
You can play back movies (with the sounds). A guide to operation appears on the LCD monitor during playback. Operations include playback, frame by frame playback (forward or reverse), pause and volume adjustment.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the movie to play back.
2
Press the four-way controller ( 2 ).
Playback starts.
• The following operations can be performed during playback.
Four-way controller ( 4 ) : Plays back in fast rewind.
Four-way controller ( 5 ) : Plays back in fast forward.
Four-way controller ( 2 ) : Pauses the movie.
OK button : Changes the display mode. ( 1
Zoom button ( w / x ) : Adjusts the volume.
• The following operations can be performed during pause.
Four-way controller ( 4 ) : Reverses the movie frame by frame.
Four-way controller ( 5 ) : Advances the movie frame by frame.
Four-way controller ( 2 ) : Restarts playback.
OK button : Changes the display mode. ( 1
3
Press the four-way controller ( 3 ).
Playback stops and the screen returns to the first frame.
4
Press the Q Playback button.
The camera returns to Capture mode.
No sound is output during fast-rewind and fast-forward playback.
6
125
Displaying Shooting Information in Playback Mode
In the Playback mode, press the OK/Display button to switch the “display modes”. There are 3 display modes for the Playback mode.
Normal Display
Shooting information is displayed.
1 Voice Memo icon
2 Card/Built-in memory icon
3 Folder name 4 File name
5 Protect icon 6 Battery indicator
7 Shooting date and time
8 Four-way controller operation guide
1 2 3 4 5
8 7 6
6
Histogram Display
The brightness distribution of the image is displayed. The horizontal axis shows the brightness (darkest at the left end and brightest at the right end) and the vertical axis shows the number of pixels.
1 Recorded pixels 2 Quality level
3 White balance 4 AE metering
5 Sensitivity
7 Aperture
6 Histogram
8 Shutter speed
10
M
8 7
1 2 3 4 5
No icons
No shooting information is displayed.
6
126
Saving the Display Mode 1
Normal Display
• If you press and hold the OK/Display button for more than 1 second, the LCD Bright Mode is activated. The LCD monitor turns brighter for a certain amount of time. ( 1
• The histogram display is not available while playing back movies.
Zoom button
Four-way controller
OK button
Nine-Image Display/Calendar Display
Nine-Image Display
You can display nine images at the same time.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select an image.
2
Press w / f on the zoom button.
Nine thumbnails of images are displayed at a time. The thumbnails change nine at a time, page by page.
Four-way controller
( 2345 )
: Moves the frame.
Four-way controller ( 4 ) : Displays the previous page when the frame is on the
Select&Delete 100-0010
Selected image upper-left image. (Available only when ten or more files are saved.)
Four-way controller ( 5 ) : Displays the next page when the frame is on the lower-right image. (Available only when ten or more files are saved.)
The icons that appear on the images indicate the following:
No icon : Still picture without voice memo
O (with image) : Still picture with voice memo
C : Movie (The first frame of the movie is shown.)
O (without image) : Sound file only
: Undisplayable image
3
Press the OK button.
The selected image is displayed full screen.
You can also display the selected image full screen by pressing the
MENU button or x / y on the zoom button in Step 3.
6
127
6
Calendar Display
In calendar display, the recorded images and sound files are displayed by date in calendar format. You can select images by date of shooting/ recording.
1
In Playback mode, press w / f on the zoom button.
Nine thumbnails of images appear.
2
Press w / f on the zoom button.
SUN MON TUE WED THU FRI SAT
The nine-image display changes to the calendar display.
3
Use the four-way controller
( 2345 ) to select a desired date on the calendar.
7
28
1
8
29
2 3
30 31
4 5 6
9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 27
2007.01
Four-way controller : Moves the frame
( 2345 ) on the calendar.
Selected date
Four-way controller ( 4 ): When the frame is on the first day of the month, goes back to the previous month.
Four-way controller ( 5 ): When the frame is on the last day of the month, goes to the next month.
4
Press the OK button or x / y on the zoom button.
OK button : Displays on full screen the first image recorded on the selected date.
Zoom button ( x / y ): Displays the images recorded on the selected date in nine-image display.
• O appears on the date on which a sound file (without image) was first recorded. The first frame of the movie appears on the date on which movie was first recorded.
• Press the MENU button in calendar display to return to the previous nine-image display.
128
Four-way controller
OK button
Slideshow
You can play back all the images on the SD Memory Card or in the built-in memory continuously.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image with which to start the slideshow.
2
Press the four-way controller ( 3 ).
Slideshow
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (Slideshow).
4
Press the OK button.
MENU Cancel OK OK
5
Use the four-way controller ( 45 ) to change the playback interval.
Select from the following: [3 sec], [5 sec],
[10 sec], [20 sec], [30 sec].
6
Use the four-way controller ( 3 ) to select [Screen Effect].
Interval
MENU
3sec
OK
6
129
6
7
Use the four-way controller ( 45 ) to select the effect.
Wipe
Fade
The effect is like a slide show that slides the displayed images one by one to the left.
The current image gradually disappears and the next image appears under it.
The current image shrinks towards the center.
Shrink
Off No screen effect.
8
Use the four-way controller ( 3 ) to select [Sound Effect].
9
Use the four-way controller ( 45 ) to select [ O (On)/ P
(Off)].
10
Press the OK button.
[Start] appears on the LCD monitor and playback starts at the set interval.
OK button : Pauses the slideshow. Press again to restart the slideshow.
A button other than OK button: Stops the slideshow.
• The slideshow will continue until you press any button.
• Movies and pictures with a voice memo will be played through to the end before the next picture is played back, regardless of the set playback interval.
• Recordings made in Voice Recording mode are not played back.
130
Deleting Images, Movies and Sounds
Four-way controller
OK button
Green button
MENU button
Deleting a Single Image, Movie or Sound
You can delete a single image, movie or sound.
Once deleted, images, movies or sounds cannot be restored.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image, movie or sound to delete.
2
Press the Green / i button.
The Delete screen appears.
3
Use the four-way controller ( 2 ) to select [Delete].
4
Press the OK button.
The image, movie or sound is deleted.
Cancel
OK
• You can also delete images during the Instant Review. ( 1
• You cannot delete protected images, movies or sounds. ( 1
6
131
6
Deleting a Voice Memo only
If an image has a voice memo, you can delete the voice memo without deleting the image.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select an image with a voice memo to delete.
2
Press the Green button.
The Delete screen appears.
3
Use the four-way controller ( 2 ) to select [Delete sound].
4
Press the OK button.
The voice memo is deleted.
Cancel
OK
Select Delete in Step 3 above to delete both the image and the voice memo.
132
Four-way controller
OK button
Green button
Deleting All Images
You can delete all the images, movies and sounds at once.
Once deleted, images, movies or sounds cannot be restored.
1
Enter the Playback mode and press the Green button twice.
The Delete All screen appears.
2
Use the four-way controller ( 2 ) to select [Delete All].
3
Press the OK button.
All the images and sounds will be deleted.
MENU
Cancel
OK
You cannot delete protected images, movies or sounds. ( 1
6
133
Zoom button
Four-way controller
OK button
Green button
6
Deleting Selected Images and Sound Files
(from Nine-Image Display)
You can delete several images/sound files selected from the nine-image display at once.
1
Enter the Playback mode and press w / f on the zoom button.
Nine thumbnail images appear.
2
Press the Green button.
[ P ] appears on the images and sound files.
Select & Delete 100-0010
3
Use the four-way controller
( 2345 ) to move the frame to an image or sound file you want to delete, and press the OK button.
[ O ] appears on the selected images and sound files.
To check the image before deleting, place
MENU Cancel Delete OK the frame on the image and press x / y on the zoom button to show it in single-image display. (You cannot show a protected image in singleimage display.)
Press the OK button to return to the nine-image display.
134
4
Press the Green button.
A confirmation dialog appears.
5
Use the four-way controller ( 23 ) to select
[Select & Delete].
6
Press the OK button.
The selected images and sound files are deleted.
You cannot delete protected images, movies or sounds. ( 1
6
135
Four-way controller
OK button
6
Protecting Images, Movies and Sounds from
Deletion (Protect)
You can protect images, movies and sounds from being accidentally deleted.
1
Enter the Playback mode and use the four-way controller
( 45 ) to select the image, movie or sound to protect.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select Z (Protect).
4
Press the OK button.
The Protect screen appears.
Protect
MENU Cancel OK OK
Protecting Images, Movies and Sounds
5
Use the four-way controller ( 23 ) to select [Single image/sound].
6
Press the OK button.
Single image/sound
OK
136
7
Use the four-way controller ( 23 ) to select [Protect].
8
Press the OK button.
Protect
OK
• Select Unprotect in Step 7 to cancel the Protect setting.
• If the image, movie or sound is protected, the Z icon appears when it is played back.
Protecting All Images, Movies and Sounds
You can protect all the images, movies and sounds.
5
Use the four-way controller ( 23 ) to select [All Images/Sounds].
6
Press the OK button.
The [Protect all images/sounds] message appears.
All Images/Sounds
OK
7
Use the four-way controller ( 23 ) to select [Protect].
8
Press the OK button.
Protect
OK
Select Unprotect in Step 7 to cancel the Protect setting on all the images, movies and sounds.
Even protected images, movies and sounds will be deleted by formatting the SD Memory Card or built-in memory.
6
137
Viewing Images on AV Equipment
1
VIDEO
AUDIO
(L) (R)
2
6
By using the AV cable, you can capture, play back and dub images on a TV or other equipment with a video IN jack. Make sure that both the AV equipment and the camera are turned off before connecting the cable.
1
Open the terminal cover and connect the AV cable supplied with the PC/AV terminal.
2
Connect the other end of the AV cable to the AV equipment.
Yellow (video) video input terminal
White (audio) sound input terminal
When using stereo sound equipment, insert the sound jack into the L
(white) terminal.
3
Turn the AV equipment on.
When the AV equipment connected to the camera and the AV equipment used to view images are separate, turn both pieces of equipment on.
To view images on a TV with several video inputs, switch the video inputs to the one connected to the camera, referring to the operating manual for the TV.
4
Turn the camera on.
Changing the Video Output Format 1
138
• If you intend to use the camera for a long time, use of the AC adapter kit K-AC63 (optional) is recommended. Refer to the operating manual for the TV or equipment to which the camera is connected.
• Images may not be displayed properly depending on the countries or areas when the Video Out setting is the default. In this situation, change the Video Out setting.
• While the camera is connected to the TV, the LCD monitor of the camera is turned off.
Playing Back an Image Using the Remote Control
Unit (optional)
When the AV cable is connected to the camera, the image can be displayed using the remote control unit E or F (optional).
1
Press the Q Playback button.
2
Press the shutter release button or the zoom button on the remote control unit.
Shutter release button : Displays the next image.
Zoom button : Displays the previous image.
6
• As there is no zoom button on the remote control unit F, only the shutter release button (displaying the next image) is available.
• You cannot play back movies, images with a voice memo, and sound files recorded in Voice Recording mode, using the remote control unit.
139
Setting the Printing Service (DPOF)
You can print the images on the SD Memory Card using a DPOF (Digital
Print Order Format) compatible printer or at a printing service.
Four-way controller
OK button
Green button
6
Printing Single Images
Set the following items for each image.
[Copies]: Select the number of copies up to a maximum of 99.
[Date] : Specify whether you want the date imprinted on the print or not.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image to print.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (DPOF).
4
Press the OK button.
The DPOF screen appears.
DPOF
MENU Cancel OK OK
5
Press the OK button.
Single Image
OK
140
6
Use the four-way controller ( 23 ) to select the number of copies.
MENU OK
7
Use the Green button to select
[ O (On)/ P (Off)] of [Date].
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
8
Press the OK button.
Prints can be made according to the settings.
MENU OK
• If DPOF settings have already been made for an image, the previous number of copies and date setting will be displayed.
• To cancel DPOF settings, set the number of copies to 0 and press the OK button.
• You cannot set the printing service for movies or sound-only files.
• Depending on the printer or printing equipment at the photo processing lab., the date may not be imprinted on the pictures even if the DPOF settings were made.
6
141
Four-way controller
OK button
Green button
6
Printing All Images
1
Enter the Playback mode and press the four-way controller ( 3 ).
The Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select
(DPOF).
3
Press the OK button.
4
Use the four-way controller ( 3 ) to select [All Images].
5
Press the OK button.
6
Use the four-way controller ( 23 ) to select the number of copies.
You can print up to 99 copies.
7
Use the Green button to select whether to insert the date or not.
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
8
Press the OK button.
Prints can be made according to the settings.
MENU OK
The number of copies specified in the DPOF settings applies to all the images. Before printing, check that the number is correct.
• Settings for single images are canceled when settings are made for all images.
• DPOF settings are not possible for movies.
142
Direct Printing Using PictBridge
By connecting the camera to a printer that supports PictBridge using the
USB cable (I-USB7) supplied with the camera, you can print images directly from the camera without using a PC. Select the images you want to print and the number of copies on the camera after it has been connected to the printer.
• We recommend the use of the AC adapter kit K-AC63 (optional) while the camera is connected to the printer. The printer may not work properly or the image data may be damaged if the battery runs out of power while the camera is connected to the printer.
• The access lamp blinks slowly while data is being transferred from the camera to the printer.
• Do not disconnect the USB cable during data transfer.
• Depending on the type of printer, not all the settings made on the camera (such as DPOF settings) may be valid.
• [USB Connection] is set to [PC] by default. Do not connect the camera to a printer when [PC] is selected.
6
Connecting the Camera to the Printer
1
Select [PictBridge] for [USB Connection] on the
[ H Set-up] menu.
Changing the USB Connection Mode 1
2
Connect the camera to the printer using the USB cable supplied with the camera.
The PictBridge menu appears.
Single Image
OK
143
Printing Single Images
1
Use the four-way controller ( 23 ) to select [Single Image].
2
Press the OK button.
The Print this image screen appears.
Single Image
OK
6
3
Use the four-way controller ( 45 ) to select the image to print.
4
Use the four-way controller ( 23 ) to select the number of copies.
You can print up to 99 copies.
5
Use the Green button to select whether to insert the date or not.
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
6
Press the OK button.
The print settings confirmation screen appears.
To print the image according to the print settings on the printer, press the OK button.
To change the print settings, go to Step 7.
7
Press the Green button.
The Change setting screen appears.
8
Select [Paper Size] and press the four-way controller ( 5 ).
MENU
PictBridge
Paper Size
Paper Type
Quality
Border Status
OK
OK
Setting
Setting
Setting
Setting
MENU
144
9
Use the four-way controller
( 2345 ) to select the paper size.
You can select only the paper sizes available with the printer you are using.
10
Press the OK button.
11
Repeat Step 8 to 10 to set
[Paper Type] [Quality] and [Border
Status].
The image is printed according to the settings.
Press the MENU button to cancel printing.
Paper Size
Setting
Card
L
100x150
Postcard
4”x6”
MENU Cancel
2L
8”x10”
A4
Letter
11”x17”
A3
When the Paper Size is set to [ Setting], images are printed according to the printer settings.
Paper Type with more E ’s supports higher quality paper.
Quality with more E ’s indicates higher print quality.
12
Press the OK button twice.
OK OK
Printing All Images
1
Use the four-way controller ( 23 ) to select [All Images].
2
Press the OK button.
The All Images screen appears.
Use the four-way controller ( 45 ) to check the images and make sure you want to print them all.
3
Confirm the number of copies, the setting of the date, and the print setting, and then start printing.
MENU OK
To set these items and print the images, refer to Steps 4 to 11 on
“Printing Single Images” (pages 144 to 145).
6
145
Printing Using the DPOF Settings
1
Use the four-way controller ( 23 ) to select
[DPOF AUTOPRINT].
2
Press the OK button.
The DPOF AUTOPRINT screen appears.
Use the four-way controller ( 45 ) to check the images and the print settings.
3
Confirm the number of copies, the setting of the date, and the print setting, and then start printing.
MENU OK
To set the number of copies and the date imprint, refer to “Setting the
Printing Service (DPOF)” (p.140). To print the images, refer to Steps 4
to 11 on “Printing Single Images” (pages 144 to 145).
6
Disconnecting the Camera from the Printer
Disconnect the camera from the printer when you have finished printing.
1
Turn the camera off.
2
Disconnect the USB cable from the camera.
3
Disconnect the USB cable from the printer.
If you disconnect the USB cable from the camera before you turn the camera off, the camera returns to Playback mode.
146
Editing Images
Four-way controller
OK button
Changing the Image Size and Quality
By changing the size and quality of a selected image, you can make the file smaller than the original. You can use this function to continue taking pictures when the card or memory is full, by making the images smaller and overwriting the original images to make more space available in the memory.
Resizing Single Images
After changing the size and quality, the image can be saved as a new image or written over the original image.
1
Use the four-way controller ( 45 ) in Playback mode to select an image to resize.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (Resize).
4
Press the OK button.
The Resize screen appears.
Resize
6
MENU Cancel OK OK
147
6
5
Use the four-way controller ( 45 ) to change the size.
6
Press the four-way controller ( 3 ).
The frame moves to [Quality Level].
7
Use the four-way controller ( 45 )
Recorded Pixels 10
M
MENU OK to change the quality.
8
Press the OK button.
9
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
10
Press the OK button.
The resized image is saved.
• Movies cannot be resized.
• You cannot select a larger size than that of the original image.
• You can resize the data to 9M, 8M, 6M or 4M.
• Protected images cannot be overwritten.
• You can resize only still pictures taken with this camera.
148
Zoom button
Four-way controller
OK button
MENU button
Cropping Images
You can crop a part of a picture and save it as a separate image.
1
Use the four-way controller ( 45 ) in Playback mode to select an image to crop.
2
Press the four-way controller ( 3 ).
Cropping
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (Cropping).
6
OK OK MENU
4
Press the OK button.
The Cropping screen appears.
5
Crop the image.
Zoom button ( x ) : Enlarges the cropping frame.
Zoom button ( w ) : Reduces the cropping MENU frame.
Four-way controller : Moves the cropping
( 2345 )
MENU button frame.
: Returns to the Mode Palette.
6
Press the OK button.
The cropped image is saved as a separate image.
Cancel
• Movies cannot be cropped.
• The image size is changed and saved.
• You can only crop still pictures taken with this camera.
OK
149
Playback button
Four-way controller
OK button
6
Rotating the Displayed Image
You can rotate a displayed image on the LCD monitor.
1
In Playback mode, use the four-way controller ( 45 ) to select the image to be rotated.
2
Press the four-way controller ( 3 ) in Playback mode.
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select s
(Image Rotation).
4
Press the OK button.
The Image Rotation screen appears.
Image Rotation
MENU Cancel OK OK
5
Press the four-way controller ( 5 ) or the four-way controller ( 4 ).
Four-way controller ( 5 ): Rotates the image
90 degrees clockwise each time you press the 2.0 x button.
MENU OK
Four-way controller ( 4 ): Rotates the image 90 degrees counter clockwise each time you press the button.
6
Press the Q button.
The camera saves the rotated image and returns to Playback mode.
• You can rotate protected ( Z ) images, but the rotated image will not be saved.
• You cannot rotate movies.
150
Four-way controller
OK button
Editing Pictures with Color Filters
This function enables you to edit still pictures with color filters.
You can select from thirteen filters: [B&W], [Sepia], [Eight colors], [B&W
+ Red], [B&W + Green], and [B&W + Blue].
1
Use the four-way controller ( 45 ) in Playback mode to select an image to edit.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select
(Color Filter).
Color Filter
6
MENU Cancel OK OK
4
Press the OK button.
The color filter screen appears.
5
Use the four-way controller ( 23 ) to select a desired filter.
6
Press the OK button.
MENU OK
The overwrite confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
151
6
Selecting the Color Filter (Eight Colors)
5
Use the four-way controller ( 23 ) to select (Eight colors).
The color bar appears.
6
Use the four-way controller ( 45 ) to select a desired color.
7
Press the OK button.
The Overwrite confirmation screen appears.
8
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
9
Press the OK button.
MENU OK
The edited image is saved with the same number of recorded pixels and quality level as the original.
152
Four-way controller
OK button
Editing Pictures with the Digital Filter
This function enables you to apply special effects to still pictures with the digital filter. You can select from five filters: [Soft], [Illustration], [Special
Effect 1], [Special Effect 2] and [Slim].
1
Use the four-way controller ( 45 ) in Playback mode to select an image to edit.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select
(Digital Filter).
Digital Filter
6
4
Press the OK button.
The Digital Filter screen appears.
5
Press the four-way controller
( 23 ) to select a desired filter.
6
Press the OK button.
The overwrite confirmation screen appears.
MENU Cancel
MENU
OK OK
SOFT
1
2
OK
153
6
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
Selecting the Slim Filter
5
Press the four-way controller
( 23 ) to select (Slim Filter).
6
Press the four-way controller
( 45 ) to adjust the strength of the slim effect.
7
Press the OK button.
SOFT
1
2
The overwrite confirmation screen appears.
8
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
9
Press the OK button.
MENU OK
The edited image is saved with the same number of recorded pixels and quality level as the original.
154
Four-way controller
OK button
Editing Pictures with Brightness Filter
This function enables you to adjust the brightness of still pictures with the brightness filter.
1
Use the four-way controller ( 45 ) in Playback mode to select an image to edit.
2
Press the four-way controller ( 3 ).
Brightness Filter
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select &
(Brightness Filter).
Cancel OK MENU OK
4
Press the OK button.
The brightness filter screen appears.
5
Use the four-way controller ( 45 ) to adjust the brightness.
Four-way controller ( 5 ): Brightens the image.
Four-way controller ( 4 ): Darkens the image.
MENU OK
The brightness is selected between -2.0EV and +2.0EV by 1/3EV step.
6
155
6
6
Press the OK button.
The overwrite confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
156
Four-way controller
OK button
Editing Movies
You can select a frame from a recorded movie to save as a still picture or divide a movie into two.
1
Use the four-way controller ( 45 ) in Playback mode to select a movie to edit.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select
(Movie Edit).
4
Press the OK button.
Movie Edit
The Movie Edit screen appears. Select the editing function that you want to use.
MENU Cancel OK OK
6
Saving a Frame from a Movie as a Still Picture
5
Use the four-way controller ( 23 ) to select [Save as Still Image].
6
Press the OK button.
The screen for choosing a frame appears.
Save as Still Image
OK
157
6
7
Press the four-way controller ( 2 ) to play back a movie. Press ( 2 ) again to pause the movie at the point you want to save.
The following operations are available during pause.
Four-way controller ( 4 ): Reverses the movie frame by
MENU frame.
Four-way controller ( 5 ): Advances the movie frame by frame.
8
Press the OK button.
The selected frame is saved as a still picture.
OK
Dividing a Movie
5
Select [Divide Movies] on the Movie Edit screen.
6
Press the OK button.
The screen for choosing the dividing position appears.
7
Press the four-way controller ( 2 ) to play back a movie. Press ( 2 ) again to pause the movie at the desired dividing position.
The following operations are available during pause.
Four-way controller ( 4 ): Reverses the movie frame by frame.
MENU
Four-way controller ( 5 ): Advances the movie frame by frame.
8
Press the OK button.
The confirmation screen appears.
9
Use the four-way controller ( 23 ) to select [Divide].
10
Press the OK button.
Divide
The movie is divided at the specified position and the two portions are saved as separate files.
OK
OK
158
Extracting Movies
5
Select [Extract] on the Movie Edit screen.
6
Press the OK button.
The Extract screen appears.
7
Press the four-way controller ( 2 ) to play back the movie and press it again to select the desired start point.
The movie is paused.
The following operations are available during pause.
MENU
Four-way controller ( 5 ): Advances the movie frame by frame.
Four-way controller ( 4 ): Reverses the movie frame by frame.
8
Press the OK button.
9
Press the four-way controller ( 2 ) to play back the movie and press it again to select the desired end point.
The movie is paused.
The following operations are available during pause.
MENU
Four-way controller ( 5 ): Advances the movie frame by frame.
Four-way controller ( 4 ): Reverses the movie frame by frame.
10
Press the OK button.
The extracted movie is saved.
OK
OK
6
159
Zoom button
Four-way controller
OK button
Green button
6
Removing Red-eye
You can remove red-eye (a phenomenon that occurs when the flash reflects from the subject’s eyes) from your pictures.
1
In Playback mode, press the four-way controller ( 45 ) to select the image you want to correct.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select Z (Red-eye
Compensation).
4
Press the OK button.
Red-eye Compensation
A confirmation dialog for overwriting the image appears.
MENU Cancel OK OK
If the error message [Cannot process correctly] appears, go to the step 5 in “Removing Red-eye Manually”
5
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
When the image is protected, [Save as] will be selected automatically.
6
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
• Red-eye compensation function cannot be used for movies. If you try to do so, the error message will appear as described in step 4.
• Red-eye compensation function can only be used for still pictures taken with this camera.
160
Removing Red-eye Manually
If the camera does not detect the red-eye, remove it manually.
5
Press the OK button.
The message [Select the area to compensate] and the screen for specifying the area for compensation appears.
6
Specify the area for compensation.
Four-way controller : Moves the area.
( 2345 )
Zoom button ( x ) : Enlarges the area.
Zoom button ( w ) : Reduces the area.
7
Press the Green button.
MENU OK
Fix R-eye Complete
Compensation starts.
When no error message appears, the compensation was successfully done. Go to the step 8.
If the error message [Cannot process correctly] appears, repeat the steps 5, 6 and 7.
8
Press the OK button.
A confirmation dialog for overwriting the image appears.
9
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
When the image is protected, [Save as] will be selected automatically.
10
Press the OK button.
The corrected image is saved with the same number of recorded pixels and quality level as the original.
6
161
Four-way controller
OK button
Green button
6
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are three frames already stored in the camera.
1
Use the four-way controller ( 45 ) in Playback mode to select the image to which you want to add a frame.
Frame Composite
2
Press the four-way controller ( 3 ).
Cancel The Mode Palette appears.
3
Use the four-way controller ( 2345 ) to select Y
(Frame Composite).
MENU OK
4
Press the OK button.
The frame selection screen appears.
5
Use the four-way controller ( 45 ) to select a frame.
OK
OK
162
6
Press the OK button.
A confirmation dialog for overwriting the image appears.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
The save options selection screen does not appear for protected images because the
“Save as” option is always used.
OK
8
Press the OK button.
The edited image is saved with the recorded pixels of 3M.
The frame composite function cannot be used on movies or images with a size of 2M or smaller. An error message appears in Step 4.
To Register a New Frame
To switch to the screen for registering a frame, press the Green button in Step 5. You can register frames which you have downloaded from the internet, etc. When you register a new frame, it replaces one of the existing frames in the built-in memory. Before you can register a new frame, copy it first to the SD Memory Card.
When a new frame on the SD Memory Card is registered in the builtin memory, it replaces one of the existing frames in the built-in memory. The replaced frame is deleted from the built-in memory.
1
In the frame selection screen, select the frame you want to remove and press the Green button.
A message appears and the frames on the SD Memory Card that you can register in the built-in memory appear.
2
Use the four-way controller ( 45 ) to select the frame you want to register and press the OK button.
The frame is registered in the built-in memory and replaces the frame selected in Step 1.
Visit the PENTAX website at the URL below to download new frames.
http://www.pentax.co.jp/english/support/digital/frame_02.html
6
163
Copying Files
Four-way controller
OK button
6
You can copy image and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when a card has been inserted in the camera.
When files are copied from the built-in memory to the SD Memory Card, all the files are copied at once. When files are copied from the SD
Memory Card to the built-in memory, the files are copied one at a time.
1
Press the four-way controller ( 3 ) in Playback mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select
(Image/Sound Copy).
3
Press the OK button.
Image/Sound Copy
The Image/Sound Copy screen appears.
Select the copying method you want to use.
MENU Cancel OK OK
Be sure to turn the camera off before inserting or removing the SD
Memory Card.
164
To Copy Files from the Built-in Memory to the SD Memory Card
4
Use the four-way controller ( 23 ) to select [ ] and press the
OK button.
All the files are copied to the SD Memory
Card.
OK
To Copy Files from the SD Memory Card to the Built-in Memory
4
Use the four-way controller ( 23 ) to select [ ] and press the OK button.
5
Use the four-way controller ( 45 ) to select the file to copy.
6
Press the OK button.
The selected file is copied to the built-in memory.
MENU OK 6
• If the image has a voice memo, the sound file will be copied at the same time as the image.
• When a file is copied from the SD Memory Card to the built-in memory, it is assigned a new file name.
165
Settings
Camera Settings
Four-way controller
OK button
Green button
7
Setting Up the Start-up Screen
You can display an image recorded with the camera as the start-up screen when the camera is turned on.
1
Press the four-way controller ( 3 ) in Playback mode.
The Mode Palette appears.
2
Press the four-way controller
( 2345 ) to select (Start-up
Screen).
3
Press the OK button.
Start-up Screen
The screen for setting start-up screen appears.You can select from five different MENU Cancel types of start-up screens, including [USER] and [Off].
OK OK
166
Setting Up the Start-up Screen Using a Captured Image (Go to
Step 5 to select a start-up screen other than USER)
4
Press the Green button, while displaying [USER] in the upperright corner of the screen, and use the four-way controller ( 45 ) to select an image for the start-up screen, and press the OK button.
MENU
To change a captured image set as a start-up screen to another image, press the Green button once to delete the image and press it again to show the screen for selecting a captured image.
5
Press the OK button.
The camera is ready for playing back images.
• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card or built-in memory is formatted.
• You cannot set up the start-up screen while playing back images on a TV or other equipment.
7
167
How to recall the [ H Set-up] menu
Shutter release button
Four-way controller
OK button
MENU button
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
7
Formatting an SD Memory Card or the Built-in
Memory
Formatting will delete all the files on the SD Memory Card if you are using a card, and all the files in the built-in memory if there is no SD
Memory Card inserted.
• Do not remove the SD Memory Card while the card is being formatted as this may damage the card and render it unusable.
• SD Memory Cards formatted on a PC or device other than the camera cannot be used. Be sure to format the card with the camera.
• Note that formatting will also delete protected files.
1
Select [Format] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
Format
The Format screen appears.
3
Use the four-way controller ( 2 ) to
All data deleted select [Format].
4
Press the OK button.
Format
Cancel
OK
Formatting starts. When formatting is completed, the camera is ready for taking pictures.
OK
If formatting was performed in Playback mode, the camera returns to Playback mode after it was completed, then the [No image/sound] message appears.
168
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
Changing the Sound Settings
You can adjust the playback volume and the volume of operation sounds, such as the start-up sound, shutter sound and operation sound.
You can also change the operation sounds.
1
Select [Sound] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
The screen for setting sounds appears.
[Operation Volume] is highlighted.
Changing the Volume
3
Use the four-way controller ( 45 ) to change the operation volume.
4
Use the four-way controller ( 3 ) to select [Playback Volume].
5
Use the four-way controller ( 45 ) to change the volume of playback
Sound
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
MENU sounds.
6
Press the shutter release button halfway.
The camera is ready for taking pictures.
1
1
1
1
7
169
How to recall the [ H Set-up] menu
Shutter release button
Four-way controller
OK button
MENU button
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
7
Changing the Sound
3
Use the four-way controller ( 23 ) to select [Start-up Sound].
4
Press the four-way controller ( 5 ).
Sound
Operation Volume
Playback Volume
Start-up Sound 1
The pull-down menu appears.
5
Use the four-way controller ( 23 ) to select [1], [2], [3] or [Off].
6
Press the OK button.
Shutter Sound
Operation Sound
Self-timer Sound
MENU
1
1
1
7
Change [Shutter Sound], [Operation Sound] and [Selftimer Sound] in the same manner.
8
Press the shutter release button halfway.
The camera is ready for taking pictures.
170
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
Changing the Sound (Using a Recorded Sound File)
You can use the sound recorded on the camera for sound settings. The first two seconds of the selected sound file will be played as [USER] sound.
1
Select [USER] in Step 5 in “Changing the Sound”.
2
Press the OK button.
The playback screen for the recorded sound files appears.
3
Use the four-way controller ( 45 ) to select a sound file.
Play back the selected file to confirm.
Four-way controller ( 2 ): Plays back the first
MENU two seconds of the sound file.
Four-way controller ( 3 ): Stops playback.
4
Press the OK button.
OK
The selected sound is set as the [USER] sound.
5
Set [Shutter sound], [Operation Sound] and [Self-timer
Sound] in the same manner.
6
Press the shutter release button halfway.
The camera is ready for taking pictures.
The Sound settings are saved when the camera is turned off.
7
171
How to recall the [ H Set-up] menu
Shutter release button
Four-way controller
OK button
MENU button
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
7
Changing the Date and Time
You can change the initial date and time settings. You can also set the style in which the date appears on the camera. Select [mm/dd/yy],
[dd/mm/yy] or [yy/mm/dd].
1
Select [Date Adjust] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
The Date Adjust screen appears.
3
Press the four-way controller ( 5 ).
The frame moves to [mm/dd/yy].
4
Use the four-way controller ( 23 ) to select the date display style.
Date Adjust
Date Style mm/dd/yy 24h
Date
Time
0 1 / 0 1 / 2 0 0 7
0 : 0 0
MENU Cancel OK OK
5
Press the four-way controller ( 5 ).
The frame moves to [24h].
6
Use the four-way controller ( 23 ) to select [24h] (24-hour display) or
[12h] (12-hour display).
7
Press the four-way controller ( 5 ).
The frame moves to [Date Style].
Date Adjust
Date Style
Date
Time
MENU Cancel mm/dd/yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK OK
172
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
8
Press the four-way controller ( 3 ).
The frame moves to [Date].
Date Adjust
Date Style mm/dd/yy 24h
Date
Time
0 1 / 0 1 / 2 0 0 7
0 : 0 0
MENU Cancel OK OK
9
Press the four-way controller ( 5 ).
Date Adjust
The frame moves to month.
10
Use the four-way controller ( 23 ) to change the month.
Date Style
Date mm/dd/yy 24h
0 1 / 0 1 / 2 0 0 7
Change the day and year in the same manner.
Time
MENU Cancel
0 : 0 0
OK OK
Next, change the time.
If you select [12h] in Step 6, the setting switches between “am” and “pm” corresponding to the time.
11
Press the OK button.
The settings are made.
12
Press the shutter release button halfway.
The camera is ready for taking pictures.
7
173
7
How to recall the [ H Set-up] menu
Shutter release button
Four-way controller
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit OK button
MENU button
Setting the World Time
The date and time selected in “Initial Settings (Setting the Display
Language and the Date and Time)” (p.28) serve as the Home Time setting.
You can display the time in a city other than the Home Time city (World
Time). This is useful when taking pictures abroad.
1
Select [World Time] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
World Time
The World Time screen appears.
3
Use the four-way controller ( 45 ) to select [ X (Destination)] or [ W
(Hometown)].
Select time
12:00AM
Destination
New York
Hometown
New York
DST
DST
MENU X (Destination): Displays the time in the city selected as the
Destination city.
W (Hometown): Displays the time in the city selected as the
Hometown city.
4
Press the four-way controller ( 3 ) to select [ X
(Destination)].
5
Press the four-way controller ( 5 ).
Destination
The Destination screen appears. The city that is currently selected blinks on the map.
6
Use the four-way controller ( 45 ) to change the Destination city.
New York
DST
The location of the destination and the time difference between the hometown and the destination appear.
MENU
+ 0 : 0 0
OK
174
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
7
Use the four-way controller ( 3 ) to select [DST].
8
Use the four-way controller ( 45 ) to select
[ O (On) / P (Off)].
Select [ O (On)] if the Destination city uses daylight saving time.
9
Press the OK button.
The World Time setting is saved.
10
Press the four-way controller ( 3 ) to select
[ W (Hometown)].
Set the location and the current time in the same manner as Steps 5 to 9.
11
Press the shutter release button halfway.
The camera is ready for taking pictures.
7
175
How to recall the [ H Set-up] menu
Four-way controller
OK button
MENU button
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
7
Changing the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
You can select from [English], [French], [German], [Spanish],
[Portuguese], [Italian], [Dutch], [Danish], [Swedish], [Finnish], [Polish],
[Czech], [Hungarian], [Turkish], [Russian], [Thai], [Korean], [Chinese
(traditional and simplified)] and [Japanese].
1
Select [Language/ ] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
3
Use the four-way controller ( 2345 ) to select the language.
4
Press the OK button.
5
Press the MENU button.
176
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
Changing the Image Folder Name
You can select the folder name style from [Standard] or [Date]. When you select [Date], pictures and sound files are saved in separate folders of the shooting/recording date.
Folder Name
Standard xxxPENTX (xxx is 3-digit folder number.)
Date xxx_mmdd (3-digit folder number_month day)
Example:
When [Standard] selected
(Shooting date: January 26)
When you change to [Date]
(Shooting date: January 26)
When you take pictures next time
(Shooting date: January 30)
100
100PENTX
100
100PENTX
100
100PENTX
101
101_0126
101
101_0126
102
102_0130
1
Select [Folder Name] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
The pull-down menu appears.
3
Use the four-way controller ( 23 ) to select [Standard] or [Date].
4
Press the OK button.
• If you set [Date Style] to [dd/mm/yy], the folder name appears as
“xxx_ddmm” (3-digit folder number_day month).
• The capacity of an image folder is 500 files maximum. When the number of files reaches 500, a new folder will be automatically created.
7
177
How to recall the [ H Set-up] menu
Four-way controller
OK button
MENU button
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
7
Changing the USB Connection Mode
You can change the USB Connection mode depending on whether the
USB cable is to be connected to a printer (PictBridge) or a computer.
1
Select [USB Connection] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
The pull-down menu appears.
3
Use the four-way controller ( 23 ) to select [PC] or
[PictBridge].
4
Press the Q Playback button.
The camera is ready for playing back images.
For details on connecting the camera to a computer, see “PC
Connection Manual” (a separate volume).
• Do not connect the camera to a computer when [Pictbridge] is selected.
• Do not connect the camera to a printer when [PC] is selected.
178
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
Changing the Video Output Format
You can select the output format (NTSC or PAL) for taking or playing back images on a TV.
1
Select [Video Out] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
The pull-down menu appears.
3
Use the four-way controller ( 23 ) to select [NTSC] or
[PAL].
Select the video output format to match the output format of the TV.
4
Press the Q Playback button.
The camera is ready for playing back images.
7
179
7
How to recall the [ H Set-up] menu
Playback button
MENU
Four-way controller
OK/Display button
MENU button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
Adjusting the Brightness of the LCD Monitor
You can adjust the brightness of the LCD monitor by seven levels.
1
Select [Brightness Level] on the [ H Set-up] menu.
2
Use the four-way controller ( 45 ) to adjust the brightness.
Slide leftwards : Darkens the LCD monitor.
Slide rightwards : Brightens the LCD monitor.
3
Press the Q Playback button.
The camera is ready for playing back images.
When you press and hold the OK/Display button for more than 1 second, the LCD monitor turns brighter for a certain amount of time.
(LCD Bright Mode) It is useful when you view the LCD monitor outdoors or in brighter places. (
The function is not available under the following conditions.
- When the menu or the Mode Palette is displayed.
- In Voice Recording mode
180
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
Setting Power Saving
By setting the LCD monitor to dim automatically when you leave the camera without performing any operations for a certain period, you can lessen battery drain. When Power Saving takes effect and the LCD monitor dims, press any button to return to the ordinary brightness.
1
Select [Power Saving] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
The pull-down menu appears.
3
Use the four-way controller ( 23 ) to select [2 min],
[1 min], [30 sec], [15 sec], [5 sec] or [Off].
4
Press the Q Playback button.
The camera is ready for playing back images.
The Power Saving function will not work in the following conditions.
- In Playback mode
- When the USB cable is connected.
- While taking movies
- During the video output
- When using the AC adapter
7
181
How to recall the [ H Set-up] menu
Playback button
Four-way controller
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
10
M
AWB
AUTO 800
MENU Exit
MENU button
7
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is performed after a fixed time.
1
Select [Auto Power Off] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
The pull-down menu appears.
3
Use the four-way controller ( 23 ) to select [5 min],
[3 min] or [Off].
4
Press the Q Playback button.
The camera is ready for playing back images.
The Auto Power Off function does not work in the following situations.
- While a USB cable is connected
- While taking movies
- While playing back movies
- While doing voice recording
- While playing back sound
- While doing a slideshow
- While using the LCD bright mode
182
OK
Set-up
Format
Sound
Date Adjust
World Time
Language/
Folder Name
MENU Exit
English
Standard
Setting the Guide Display
You can show the information on the current mode and the functions currently assigned to the Green button when you start up the camera in
Capture mode or switch from other modes to Capture mode.
You can also show the description for the selected mode on the Mode
Palette.
1
Select [Guide Display] on the [ H Set-up] menu.
2
Use the four-way controller ( 45 ) to select [ O (On)/ P (Off)].
3
Press the Q Playback button.
The camera is ready for playing back images.
Resetting to Default Settings
You can return all the settings other than the date and time, world time,
Language/ , and video out to the default settings.
1
Select [Reset] on the [ H Set-up] menu.
2
Press the four-way controller ( 5 ).
Reset
The Reset screen appears.
3
Use the four-way controller ( 2 ) to Reset to initial setting?
select [Reset].
4
Press the OK button.
Reset
Cancel
OK
The settings return to the defaults and the camera is ready for taking or playing back images.
OK
7
183
Appendix
List of City
8
184
This is a list of cities which you can select for the World Time.
Region
North
America
Central and
South
America
Europe
Africa/West
Asia
Honolulu
Anchorage
City
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Santiago
Caracas
Buenos Aires
Sao Paulo
Rio de Janeiro
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Athens
Helsinki
Moscow
Dakar
Algiers
Johannesburg
Istanbul
Cairo
Jerusalem
Region
Africa/West
Asia
East Asia
Oceania
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
City
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho chi Minh
Default Settings
The table below lists the factory default settings.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is turned off.
No : The setting returns to the default setting when the camera is turned off.
∗ : The setting depends on the Memory setting (
Reset Setting
Yes : The setting returns to the default setting with the Reset function
( 1
No : The setting is saved even after reset.
[ A Rec. Mode] Menu Items
Item
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF Setting Focus Limiter
Aux. AF Light
AE Metering
Sensitivity
EV Compensation
Recorded Pixels
Movie Quality Level
Movie SR
Digital Zoom
Instant Review
Default Setting
10M
D (Better)
F (Auto)
J (Multiple)
On
On
L (Multi-segment)
AUTO 800
±0.0
640 (640×480)
C (Best)
On
On
0.5 sec
Last
Memory
Setting
Yes
Yes
∗
Yes
Yes
Yes
∗
∗
∗
Yes
Yes
Yes
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
8
185
8
Item
Flash Mode
Drive Mode
Memory
Focus Mode
Zoom Position
MF Position
White Balance
AE Metering
Sensitivity
EV Compensation
Digital Zoom
Green Button
Sharpness
DISPLAY
File #
Saturation
Contrast
Date Imprint
[ H Set-up] Menu
Item
Format
Sound
Date
Adjust
World
Time
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
Date Style
Select time
Destination (City)
Destination (DST)
Hometown (City)
Hometown (DST)
186
Default Setting
On
Off
Off
Off
Off
On
Off
Off
Off
Off
Off
On
Green Mode
Standard
Standard
Standard
Off
Last
Memory
Setting
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
-
to
Default Setting
-
3
3
1
1
1
1
According to initial setting
Hometown
Same as
Hometown
Off
According to initial setting
According to initial setting
Last
Memory
Setting
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Setting
-
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
No
Yes No
Page
Item
Language/
Folder Name
USB Connection
Video Out
Brightness Level
Power Saving
Quick Zoom
Auto Power Off
Guide Display
Reset
Default Setting
According to initial setting
Standard
PC
According to initial setting
4
5 sec
Off
3 min
On
-
Playback Mode Palette Items
Item u Slideshow
Interval
Screen Effect
Sound Effect n Resize o Cropping p Image/Sound Copy s Image Rotation
Color Filter
Digital Filter
& Brightness Filter
[ Movie Edit
Z Red-eye Compensation
Voice Memo
Z Protect r DPOF
Start-up Screen
Y Frame Composite
Default Setting
3 sec
Wipe
On
According to the taken picture
According to the taken picture
Built-in → SD memory
According to the degree of rotation
B&W
SOFT
±0.0 EV
Save as Still
Image
-
-
Select image/ sound
Select image
According to the taken picture
-
Last
Memory
Setting
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
No
No
No
No
No
-
-
Last
Memory
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
Reset
Setting
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
-
-
-
-
-
-
Reset
Setting
Yes
Yes
Yes
-
-
-
Page
Page
8
187
8
Flash
Mode
Drive
Mode
Focus
Mode
Rec.
Mode menu
Others
Auto
Flash Off
Flash On
Auto + Red-eye
Flash On + Red-eye
Soft Flash
Self-timer
Continuous Shooting
Remote Control
Standard (Autofocus)
Macro
Super Macro
Pan Focus
Infinity
Manual Focus
Recorded Pixels
Quality Level
White Balance
Focusing Area
Focus Limiter
Aux. AF Light
AE Metering
Sensitivity
EV Compensation
Sharpness
Saturation
Contrast
Digital Zoom
Intelligent Zoom
LCD Backlight Off
*1: Fixed to AWB.
*2: Fixed to Multi-segment.
*3: Fixed to Standard.
*4: Fixed to 3M.
*5: Fixed to 5M.
Available functions for each Capture mode
{ : Available × : Not available b A q < z
{ { { { { *16 *16 *16 *16
{ { { { { { { { {
{ { { { { *16 *16 *16 *16
{ { { { { { { { {
{ { { { { { {
{ { { { { { {
{
{
{
{
{ { { { { { {
{ { { { { { {
{ { { { { { {
{ { { { { { {
{ { { { { { {
{ { { { { { {
{
{
{
{
{
{
{
{
{
{
{
{
{ { { { { { {
{ { { { { { {
{
{
{
{
{ { { { { { {
{ { { { { { {
{ { { { { { {
{
{
{
{
*4
{
*1 { { *1 *1 *1 *1 *1 *1
{ { { { { { *13 { {
{ { { { *6 { {
{ { { *6 { { *15
{
{
{
*2 { { *2 *2 *2 *2 *2 *2
{ { { { { { { { {
× { { { { { { {
{
{
*3 { { *3 *3 *3 *3 *3 *3
*3 { { *3 *3 *3 *3 *3 *3
*3 { { *3 *3 *3 *3 *3 *3
{ { { { { { { { {
{ { { { { { {
{ { { { { × ×
{
×
{
×
*6: Set to Off. (changeable)
*7: Set to Flash Off. (changeable)
*8: Automatic tracking AF cannot be selected.
*9: Fixed to Spot.
For the Green Mode settings, see p.59.
188
{
{
{
{
{
{
{
{
{
{
{
{
{
L
{
{
{
{
*2
{
{
*3
*1
{
{
{
*3
*3
{
{
{
{
{
{
{
{
{
{
*7
{
{
{
{
E
{ {
K Y C O
{ { × –
*7 { { { –
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
×
×
×
×
–
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{ { {
{ { {
{ { {
{ { {
{
×
{
{
{
{
{
×
× {
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
*5
{
{
{
{
{
{
{
{
×
{
{
{
{
*2
{
{
*3
*3
*3
{
{
{
{
{
{
{
{
{
{ { {
*4
{
{
{
{
{ { {
{ { {
{ *14 –
{
*3 *3 *3 {
{
{
–
–
*3 *3 *3 {
*3 *3 *3 {
{
{
–
–
{ { {
{
{
{
{
{
{
{ *12 –
{ × –
× { {
–
–
–
{ *1 *1 *1 *1 {
{ *13 *13 { {
{ { *7 *7 *7
{ *15 *15 { {
*8
{ *10 –
{
{
*9
*10
–
–
–
*2 *2 *2 { *11 –
–
–
–
–
–
–
–
–
*10: Fixed to Off.
*11: Fixed to Center-weighted.
*12: Available only when Movie SR is set to Off.
*13: Set to Automatic tracking AF.
(changeable)
Auto
Flash Off
Flash On
Auto + Red-eye
Flash On + Red-eye
Soft Flash
Self-timer
Continuous Shooting
Remote Control
Standard (Autofocus)
Macro
Super Macro
Pan Focus
Infinity
Manual Focus
Recorded Pixels
Quality Level
White Balance
Focusing Area
Focus Limiter
Aux. AF Light
AE Metering
Sensitivity
EV Compensation
Sharpness
Saturation
Contrast
Digital Zoom
Intelligent Zoom
LCD Backlight Off
Flash
Mode
Drive
Mode
Focus
Mode
Rec.
Mode menu
Others
*14: Fixed to AUTO.
*15: Available unless Automatic tracking AF is selected.
*16: When the camera recognizes a face, the flash is automatically set to a Red-eye reduction mode.
8
189
Optional Accessories
A number of dedicated accessories are available for this camera.
Products with an asterisk ( ∗ ) are the same as those supplied with the camera.
8
Power related accessories
Rechargeable lithium-ion battery D-LI68 ( ∗ )
Battery charger kit K-BC68 ( ∗ )
(Set includes battery charger D-BC68 and AC plug cord.)
AC adapter kit K-AC63
(Set includes AC adapter D-AC63 and AC plug cord.)
Connection cables
USB cable I-USB7 ( ∗ )
AV cable I-AVC7 ( ∗ )
Strap
Chain strap O-ST8
Strap O-ST20 ( ∗ )
Leather strap O-ST24 (genuine leather)
Sports strap O-ST30 (water resistant)
Case
Camera case O-CC66
Remote Control
Remote control unit E (zoom function)
Remote control unit F
190
Messages
Messages such as the following may appear on the LCD monitor during camera operation.
Message
Compression error
No image/sound
Explanation
Compression of the image you captured has failed. Change the quality/size and try again.
There are no images/sounds on the SD Memory Card or in the built-in memory.
Memory card full
Built-in memory full
Image/sound cannot be created
Memory card error
The SD Memory Card or the built-in memory is full and no more images can be saved.
Insert a new SD Memory Card or delete unwanted images.
Change the quality/size and try again. (p.147)
You can only record up to 10,000 files due to the specifications of the camera, even when using a large volume SD Memory Card. Delete unwanted files to continue recording.
Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to play back the images or sounds on a PC.
Card not formatted
Card locked
The SD Memory Card you have inserted is unformatted or has been formatted on a PC or other device and is not
compatible with this camera. (p.168)
The SD Memory Card is write-protected. Only menu operation and mode change are possible.
Data being recorded This is displayed when you switch to Playback mode while the image is being saved or protect setting or DPOF settings are being saved. The message disappears when saving of an image or setting is completed.
Data being processed The image is being recorded on the SD Memory Card or in the built-in memory.
The protect setting or DPOF settings is being changed.
Deleting
Camera cannot play this image and sound
The movie is being recorded.
The image is being processed with digital filter.
The movie is being edited.
The SD Memory Card or built-in memory is being formatted.
The image or sound is being deleted.
You are trying to play back an image or sound in a format not supported by this camera. You may be able to play it back on another brand of camera or PC.
8
191
8
Message
Battery depleted
Image folder cannot be created
Protected
This image/sound cannot be processed
No image to be processed
Explanation
The battery is exhausted. Recharge the battery or replace
The largest folder number has been used and the largest file number has been assigned to an image and no more images can be saved. Insert a new SD Memory Card or format the SD Memory Card or built-in memory.
The image or sound you are trying to delete is protected.
You are trying to resize, crop, protect an image, or you are trying to set an image for DPOF, or you are trying to edit an image with a digital filter or edit a movie while the image or movie cannot be processed with these functions.
There is no file that can be processed with the Playback
Mode Palette.
Messages such as the following may appear on the LCD monitor when using the PictBridge function.
Message Explanation
No paper in the printer There is no paper in the printer.
No ink in the printer There is no ink in the printer.
Printer error
Data error
Paper stuck in the printer
Connection error
Check printer
An error message has been sent from the printer.
A data error message has been sent from the printer.
The paper in the printer has jammed.
Failed to connect to the printer. Check the status of the printer.
192
Troubleshooting
Problem
The camera will not turn on
No image appears on the
LCD monitor
Cause Remedy
The battery is not installed
The battery is installed incorrectly
Check if a battery is installed. If not, install
Check orientation of the battery and
The battery is exhausted Charge the battery. (p.17)
The battery performance has temporarily deteriorated because it is too cold
Warm up the battery by putting it in a pocket where it can come in contact with body heat.
The LCD monitor is set to Off
The image is displayed but is hard to see
Press the OK/Display button to turn the
LCD monitor On.
The image on the LCD monitor may be hard to see when taking pictures outside in sunlight.
The shutter will not release
The picture is dark
The flash is charging
There is no available space on the SD Memory Card or in the built-in memory.
When the flash icon blinks red on the LCD monitor, the flash is charging and no pictures can be taken. The flash icon lights red when charging is completed.
Insert an SD Memory Card with available
space or delete unwanted images. (p.23,
Recording
The number of image, movie, and sound files recorded on the SD
Memory Card has reached 10,000.
Wait until recording is finished.
Replace the SD card with another having available space or delete unwanted files.
The subject is too far away in a dark environment, such as a night scene
The picture will become dark if the subject is too far away. Take pictures within the specified flash range.
The background is dark When taking a picture of a person against a dark background, such as a night scene, the background may appear dark if the flash does not reach it, even with the correct exposure. Set the capture mode to
A (Night Scene) to ensure that both the person and the background are clear.
8
193
8
Problem
The subject is not in focus
The subject is difficult to focus on
Cause
The subject is not in the focusing area
Remedy
The camera may have difficulty in focusing on such subjects as: low-contrast subjects (a white wall, a blue sky, etc.), dark subjects, finely-patterned objects, rapidly-moving objects. It is also difficult to get proper focus when shooting through a window or a net. Try shooting using the
focus lock (p.32) or Manual Focus (p.88).
Locate the desired subject in the focus frame J (focusing area) in the center of the LCD monitor. If it is difficult to do so, first lock the focus on the desired subject
(focus lock), and then move the camera to
The flash does not discharge
The USB
Connection with a personal computer does not function properly.
The USB
Connection with a printer does not function properly.
The subject is too close Set the focus mode to q (Macro) or r
The focus mode is set to q (Macro) or r (Super
Macro)
Normal pictures will be out of focus if taken with the focus mode set to q (Macro) or r (Super Macro).
Set the flash mode to Auto or b
The flash mode is set to
Off
The Capture mode is set to C (Movie) mode,
Continuous Shooting,
Infinity, or E (Pet) mode
The USB Connection setting of the camera is set to PictBridge.
The flash will not discharge in these modes. You can cancel the non-flash setting in (Sport) mode and mode.
E (Pet)
Set the USB Connection setting to PC.
The USB Connection setting of the camera is set to PC.
Set the USB Connection setting to
Very occasionally, static electricity may cause camera malfunction. In this case, remove the battery and install it again. If the camera is then working properly, normal condition is restored and you can continue using the camera.
194
Main Specifications
Camera
Type
Effective Pixels
Sensor
Recorded Pixels
ISO sensitivity
File Format
Quality Level
Storage Medium
Fully automatic compact digital still camera with built-in zoom lens
10.0 megapixels
10.37 megapixels (total pixels), 1/1.8-inch interline transfer CCD with a primary color filter
Still Picture 10M (3648×2736), 7M (3072×2304), 5M (2592×1944),
3M (2048×1536), 2M (1600×1200),
1024 (1024×768), 640 (640×480)
* Fixed to 5M (2592×1944) for Digital SR mode and 3M
(2048×1536) for both Best Framing and Frame Composite modes.
Movie 640 (640×480), 320 (320×240)
AUTO (64 to 800, 64 to 1600 in Digital SR mode)
*You can change the Auto sensitivity range from the menu.
AUTO, Manual (64/100/200/400/800/1600 /3200*)
*3200 available only in Digital SR mode
Still Picture
Movie
JPEG (Exif2.2), DCF, DPOF, PRINT Image Matching III
AVI (MPEG-4 DivX), approx. 30 fps with sound, Movie SR (25 fps image signals recorded at 30 fps)
Sound WAV (PCM system), monaural, max. recording time approx.
8 hours 35 min. 26 sec. (when using a 512 MB SD Memory
Card)
“Best”, “Better”, “Good”
Built-in memory (approx. 22 MB), SD Memory Card, SDHC Memory Card
Image Storage Capacity and Recording Time (When using a 512 MB SD Memory Card)
Still Pictures
Quality Level
Recorded Pixels
10M
7M
5M
3M
2M
1024
640
Movie
Best
C
147
208
293
444
623
1133
2079
Better
D
213
302
424
642
900
1638
3004
Good
E
296
418
588
890
1247
2268
4160
Sound
8 hr.
35 min. 26 sec.
Quality Level
Recorded Pixels
640 (640×480)
320 (320×240)
C
Best
22 min. 58 sec.
1 hr. 28 min. 53 sec.
D
Better
28 min. 47 sec.
1 hr. 50 min. 25 sec.
E
Good
34 min. 33 sec.
2 hr. 7 min. 18 sec.
* The above table indicates the approximate number of images and recording time. The number of images and recording time may vary depending on an SD Memory Card and subject.
8
195
8
White Balance
Lens
Intelligent Zoom
Digital Zoom
LCD Monitor
Playback Functions
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual
Focal Length 7.9 mm - 23.7 mm (equivalent to 38 mm - 114 mm in
35 mm format)
Maximum Aperture f/2.8 - f/5.4
Lens Composition 7 elements in 5 groups (two dual-sided aspherical elements, one single-sided aspherical element)
Zoom Type
Picture Range
Electrically driven
Approx. 65.9 mm
Macro mode)
× 48.8 mm (screen is filled) (Super
Lens Cover Electrically driven
3.6× at 7M (3072 × 2304), 4.2× at 5M (2592 × 1944), 5.3× at 3M
(2048 × 1536), 6.7× at 2M (1600 × 1200), 10.4× at 1024 (1024 × 768),
16.3× at 640 (640 × 480), The ratio of 3× optical zoom included. The ratios are approximate.
Capture Mode 5.4× maximum, or equivalent to 16.3× maximum (3× optical zoom ratio included) in all recorded pixels.
2.5-inch TFT color LCD, approx. 232,000 pixels, with LCD backlight, low reflective type, field of view: approx.100%, wide viewing angle, the brightness of backlight adjustable in two steps or by holding down the OK/
Display button for more than 1 second.
Single-frame, 9 frame index, calendar, enlargement (max. 8×, scrollable), movie playback, sound playback, histogram display, Select & Delete
Playback Mode Palette (Slideshow, Resize, Cropping, Image/Sound Copy,
Image Rotation display, Color Filter, Digital Filter, Brightness Filter, Movie
Edit, Red-eye Compensation, Voice Memo, Protect, DPOF, Start-up
Screen, Frame Composite)
Color filter B&W, Sepia, Color filter (Bar display, Eight colors), B&W +
Red, B&W + Green and B&W + Blue.
Digital filter Soft, Illustration, Special Effect 1, Special Effect 2, Slim
Brightness filter Brightness filter
Focusing System Type
Focusing Range
TTL contrast detection system by sensor, auxiliary AF light, 5-point AF, Spot AF, or Automatic tracking AF selectable, Focus lock is possible by pressing the shutter release button halfway.
∞
Normal: Approx. 0.35 m (full zoom range)
Macro: Approx. 0.12 m - Approx.
0.4 m (at full wideangle to 11.5 mm)
Super Macro: Approx. 0.06 m - Approx. 0.15 m (full wide-angle)
Switchable between infinity, pan focus, and manual focus.
Exposure Mechanism AE Metering TTL metering by sensor (multi-segment, centerweighted, spot)
Exposure Modes Picture modes, Program
EV Compensation ±2 EV (can be set in 1/3 EV steps)
Capture Modes
Movie
Green, Mode Palette (Auto Picture, Program, Night Scene, Movie, Voice
Recording, Landscape, Natural Skin Tone, Flower, Portrait, Kids, Half-length
Portrait, Sport, Surf & Snow, Digital SR, Food, Pet, Text, Frame Composite)
Shooting Time Minimum approx. 1 sec., recordable until the capacity of SD Memory Card reaches full. (The continuous recording is possible until the file size reaches 2 GB.)
Editing
Functions
Save as Still Image, Divide Movies, Extract
196
Shutter speed
Flash
Drive Modes
Self-timer
Time Function
Power Supply
Battery Life
In/Out Port
Video Output Format
Size
Approx. 1/2000 sec. - 4 sec.
Type Auto flash with red-eye reduction function
Flash Modes Auto, Flash Off, Flash On, Auto + Red-eye, Flash On
+ Red-eye, Soft Flash
Effective Range Wide: Approx. 0.06 m - Approx. 7.1 m (for auto ISO sensitivity)
Tele: Approx. 0.35 m - Approx. 3.5 m (for auto ISO sensitivity)
Single-frame, Continuous, 10-sec. Self-timer, 2-sec. Self-timer, 3-sec.
Remote Control, Instant Remote Control
Electronic control type, delay time: approx. 10 sec., 2 sec.
World Time setting for 75 cities (28 time zones)
Rechargeable lithium-ion battery D-LI68, AC adapter (optional)
Still Images Approx. 200 (at 23°C with LCD monitor on, flash fired for 50% of shots and using a rechargeable lithium ion battery D-LI68
* The number of recordable images are based on the
CIPA standard measurement, but it may vary with the conditions under which the camera is used.
Playback time Approx. 170 min.
* Measured based on PENTAX standard and may vary depending on the condition of use.
Approx. 115 min.
Maximum charging time
USB/AV terminal (PC communication type USB 2.0, high-speedcompatible), external power supply terminal
NTSC, PAL
87 (W) × 54 (H) × 21 (D) mm (excluding operating members and projections)
Weight 110 g (excluding battery and SD Memory Card)
Weight When Shooting 130 g (including battery and SD Memory Card)
Accessories Rechargeable lithium-ion battery, battery charger, AC plug cord, USB cable, software (CD-ROM), AV cable, strap, operating manual
8
197
WARRANTY POLICY
8
All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized PENTAX service facilities.
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there is no representative of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
198
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
8
The CE Mark is a Directive conformity mark of the European
Union.
199
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
8
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply.
The lithium battery used in this camera contains perchlorate material,which may require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
200
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX IMAGING COMPANY
A Division of PENTAX of America, Inc.
Located at: 600 12
th
Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: Optio S10
Contact person: Customer Service Manager
Date and Place: August, 2007, Colorado
8
201
8
Information on disposal for users
1. In the European Union
If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. There exists a separate collection system for these products.
Used electric/electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Following the implementation by member states, private households within the EU states may return their used electrical/electronic equipments to designated collection facilities free of charge*. In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one.
* Please contact your local authority for further details.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
202
Index
Symbols
[ A Rec.Mode] menu . . . . . . . . . . 44
[ H Set-up] menu . . . . . . . . . . . . . 44
Playback button . . . . . 40, 41, 43
Q (Playback mode) . . . . . . . . . . 36
f (Nine-image display) . . . . . . . 127
i (Delete button) . . . . . . . . 37, 131
(Green button) . . . . . . . . . 40, 59
B (Green Mode) . . . . . . . . . . . . . 59
b (Auto Picture mode) . . . . . 50, 61
R (Program mode) . . . . . . . . . . . 63
A (Night Scene mode) . . . . . 50, 74
(Movie mode) . . . . . . . . . . 50, 76
. . . . . . . . . . . . . . . . . . . 51, 118
q (Landscape mode) . . . . . . 51, 64
(Flower mode) . . . . . . . . . 51, 64
z (Natural Skin Tone mode) . . . . 66
(Portrait mode) . . . . . . . . . 51, 66
. . . . . . . . . . . . . . . . . . . . 51, 66
(Kids mode) . . . . . . . . . . . . 51, 68
L (Surf & Snow mode) . . . . . 52, 64
(Sport mode) . . . . . . . . . . 52, 64
g (Self-timer) . . . . . . . . . . . . . . . . 80
j (Continuous Shooting) . . . . . . 81
(Pet mode) . . . . . . . . . . . 52, 72
(Text mode) . . . . . . 52, 73
(Food mode) . . . . . . . . . . . 52, 64
(Digital SR mode) . . . . . . . . . 75
. . . . . . . . . . . . . . . . . . . . 53, 78
(SD Memory Card) . . . . . 23, 123
(Built-in memory) . . . . . . 23, 123
c (Battery level indicator) . . . . . 18
(Movie SR On) . . . . . . 76, 107
A
AC plug cord . . . . . . . . . . . . . . . . 17
Access lamp . . . . . . . . . . . . . . . . . 13
Auto Picture Mode . . . . . . . . . . . . 61
Auto Power Off . . . . . . . . . . . . . . 182
Autofocus mode . . . . . . . . . . . . . . 87
Autofocus Settings . . . . . . . . . . . . 98
Auxiliary AF light . . . . . . . . . . . . 100
AV cable . . . . . . . . . . . . . . . . . . . 138
B
Battery . . . . . . . . . . . . . . . . . . . . . 16
Battery Level Indicator . . . . . . . . . 18
Battery/card cover . . . . . . . . . . . . 16
Best . . . . . . . . . . . . . . . . . . . . . . . 25
Better . . . . . . . . . . . . . . . . . . . . . . 25
Brightness Filter . . . . . . . . . . . . . 155
Brightness Level . . . . . . . . . . . . 180
C
Calendar Display . . . . . . . . . . . . 127
Capture Mode . . . . . . . . . . . . . . . 40
Capture Mode Palette . . . . . . . . . 50
Color Filters . . . . . . . . . . . . . . . . 151
Color Saturation . . . . . . . . . . . . . 113
Continuous Shooting . . . . . . . . . . 81
Copying image and sound files . . . . . . . . . . . . . . 164
Cropping . . . . . . . . . . . . . . . . . . 149
D
Date and Time . . . . . . . . . . . . . . 172
Date Imprint . . . . . . . . . . . . . . . . 115
Delete All Images . . . . . . . . . . . . 133
Delete Images . . . . . . . . . . . . . . 131
Digital Filter . . . . . . . . . . . . . . . . 153
Digital SR . . . . . . . . . . . . . . . . . . . 75
Display Language . . . . . . . . . . . 176
DPOF . . . . . . . . . . . . . . . . . . . . . 140
8
203
8
E
Exposure . . . . . . . . . . . . . . . . . . 104
F
Face recognition . . . . . . . . . . . . . 66
Flash . . . . . . . . . . . . . . . . . . . . . . 13
Flash Mode . . . . . . . . . . . . . . . . . 90
Fn Setting . . . . . . . . . . . . . . . . . 110
Focus frame . . . . . . . . . . . . . . . . . 32
Focus Limiter . . . . . . . . . . . . . . . . 99
Focus lock . . . . . . . . . . . . . . . . . . 34
Focus Mode . . . . . . . . . . . . . . . . . 87
Focusing Area . . . . . . . . . . . . . . . 98
Folder Name . . . . . . . . . . . . . . . 177
Format . . . . . . . . . . . . . . . . . . . . 168
Four-way controller . . . . . 14, 40, 41
Frame Composite . . . . . . . . 78, 162
G
Good . . . . . . . . . . . . . . . . . . . . . . 25
Green button . . . . . . 14, 40, 42, 109
Green Mode . . . . . . . . . . . . . . . . . 59
Guide Display . . . . . . . . . . . . . . 183
H
Half-length Portrait mode . . . . . . . 66
Histogram . . . . . . . . . . . . . . . 56, 57
Home Time . . . . . . . . . . . . . . . . 174
I
Image Contrast . . . . . . . . . . . . . 114
Image quality of movies . . . . 26, 106
pictures . . . . . . . . . . . . . . 25, 94
Image Sharpness . . . . . . . . . . . . 112
Image Size of movies . . . . . 26, 105
Image Size of still pictures . . . 25, 92
Infinity mode . . . . . . . . . . . . . . . . 87
Initial Settings . . . . . . . . . . . . . . . 28
Instant Review . . . . . . . . . . . 35, 108
Intelligent Zoom . . . . . . . . . . . . . . 85
K
Kids Mode . . . . . . . . . . . . . . . . . . 68
204
L
. . . . . . . . . . 35, 36, 40, 42, 180
Lens . . . . . . . . . . . . . . . . . . . . . . . 13
Light Metering mode . . . . . . . . . 101
M
Macro mode . . . . . . . . . . . . . . . . . 87
Manual Focus mode . . . . . . . . . . 87
Memory . . . . . . . . . . . . . . . . . . . 116
MENU button . . . . . . . . . . 14, 40, 42
Menu List . . . . . . . . . . . . . . . . . . . 47
Messages . . . . . . . . . . . . . . . . . . 191
Microphone . . . . . . . . . . . . . . . . . 13
Movie Edit . . . . . . . . . . . . . . . . . 157
Movie SR . . . . . . . . . . . . . . . . . . 107
N
Night Scene Mode . . . . . . . . . . . . 74
Nine-Image Display . . . . . . . . . . 127
NTSC . . . . . . . . . . . . . . . . . . 31, 179
Number of recordable images . . . 18
O
OK/Display button . . . 14, 35, 40, 43
Operating Time . . . . . . . . . . . . . . 18
Optional Accessories . . . . . . . . . 190
P
PAL . . . . . . . . . . . . . . . . . . . 31, 179
Pan Focus mode . . . . . . . . . . . . . 87
Pet Mode . . . . . . . . . . . . . . . . . . . 72
PictBridge . . . . . . . . . . . . . . . . . . 143
Picture Mode . . . . . . . . . . . . . . . . 64
Play back Movies . . . . . . . . . . . . 125
Play back Sound . . . . . . . . . . . . 120
Play back Still Pictures . . . . . . . . . 36
Play back the Previous or Next
Image . . . . . . . . . . . . . . . . . . 36
Playback button . . . . . . . . 14, 40, 41
Playback Mode . . . . . . . . . . . . . . 41
Playback Mode Palette . . . . . . . . 54
Portrait Mode . . . . . . . . . . . . . . . . 66
Power indicator . . . . . . . . . . . . . . 13
Power Saving . . . . . . . . . . . . . . . 181
Power switch . . . . . . . . . . . . . . . . 13
Printer . . . . . . . . . . . . . . . . . . . . 143
Program Mode . . . . . . . . . . . . . . . 63
Protect . . . . . . . . . . . . . . . . . . . . 136
Q
Quick Zoom . . . . . . . . . . . . . . . . 124
R
Rec. Mode Menu . . . . . . . . . . . . . 47
Recording Sound . . . . . . . . . . . . 118
Red-eye Compensation . . . . . . . 160
Remote Control . . . . . . . . . . 83, 139
Reset . . . . . . . . . . . . . . . . . . . . . 183
Resize images . . . . . . . . . . . . . . 147
Rotate images . . . . . . . . . . . . . . 150
S
SD Memory Card . . . . . . . . . . 23, 24
Self-timer . . . . . . . . . . . . . . . . . . . 80
Self-timer lamp . . . . . . . . . . . . . . . 13
Sensitivity . . . . . . . . . . . . . . . . . . 102
Set the Menus . . . . . . . . . . . . . . . 44
Set-up Menu . . . . . . . . . . . . . . . . 48
Shutter release button . . . . . . 13, 32
Shutter Sound . . . . . . . . . . . . . . 170
Slideshow . . . . . . . . . . . . . . . . . 129
Sound Settings . . . . . . . . . . . . . 169
Speaker . . . . . . . . . . . . . . . . . . . . 13
Start-up Screen . . . . . . . . . . . . . 166
Start-up Sound . . . . . . . . . . . . . . 170
Strap . . . . . . . . . . . . . . . . . . . . . . 15
Super Macro mode . . . . . . . . . . . 87
Symbols . . . . . . . . . . . . . . . . . . . . . 9
T
Take Movies . . . . . . . . . . . . . . . . 76
Take Still Pictures . . . . . . . . . . . . 32
Tele . . . . . . . . . . . . . . . . . . . . . . . 85
Text . . . . . . . . . . . . . . . . . . . . . . . 73
Tripod socket . . . . . . . . . . . . . . . . 13
TV . . . . . . . . . . . . . . . . . . . . . . . 138
U
USB cable . . . . . . . . . . . . . . . . . 143
USB Connection . . . . . . . . . . . . 178
V
Video Output Format . . . . . . . . . 179
Voice Memo . . . . . . . . . . . . . . . . 121
Voice Recording Mode . . . . . 43, 118
W
White Balance . . . . . . . . . . . . . . . 96
Wide . . . . . . . . . . . . . . . . . . . . . . . 85
World Time . . . . . . . . . . . . . . . . . 174
Write-protect switch . . . . . . . . . . . 24
Z
Zoom . . . . . . . . . . . . . . . . . . . . . . 85
Zoom button . . . . . . . . . . . 14, 40, 41
Zoom Display . . . . . . . . . . . . . . . 123
8
205
PENTAX Corporation 2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.co.jp/)
PENTAX Europe GmbH (European Headquarters)
PENTAX U.K. Limited
PENTAX France S.A.S.
Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex, FRANCE
(http://www.pentax.fr)
PENTAX Italia S.r.l.
PENTAX (Schweiz) AG
Via Dione Cassio 15, 20138 Milano, ITALY
(http://www.pentaxitalia.it)
Widenholzstrasse 1, 8304 Wallisellen, Postfach 367 8305
Dietlikon, SWITZERLAND (http://www.pentax.ch)
PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
PENTAX Canada Inc.
(Headquarters)
600 12 th Street, Suite 300
Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
12000 Zuni Street, Suite 100B
Westminster, Colorado 80234, U.S.A
(http://www.pentaximaging.com)
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca) http://www.pentax.co.jp/english
• Specifications and external dimensions are subject to change without notice.
57912 Copyright © PENTAX Corporation 2007
02-200707 Printed in Philippines
İndir
Herkese açık bağlantı güncellendi
Sohbetinize giden herkese açık bağlantı güncellendi. You may view and manage your chat links after registration here.
Belge herkese açık bağlantısı
Reklam