Appendix. Pentax Optio Optio S-10, S10, Optio S10, 19342 - Optio S10 10MP Digital Camera

PDF

Document

Appendix

List of City

184

This is a list of cities which you can select for the World Time.

Region

North

America

Central and

South

America

Europe

Africa/West

Asia

Honolulu

Anchorage

City

Vancouver

San Francisco

Los Angeles

Calgary

Denver

Chicago

Miami

Toronto

New York

Halifax

Mexico City

Lima

Santiago

Caracas

Buenos Aires

Sao Paulo

Rio de Janeiro

Lisbon

Madrid

London

Paris

Amsterdam

Milan

Rome

Copenhagen

Berlin

Prague

Stockholm

Budapest

Warsaw

Athens

Helsinki

Moscow

Dakar

Algiers

Johannesburg

Istanbul

Cairo

Jerusalem

Region

Africa/West

Asia

East Asia

Oceania

Jakarta

Hong Kong

Beijing

Shanghai

Manila

Taipei

Seoul

Tokyo

Guam

Perth

Adelaide

Sydney

Noumea

Wellington

Auckland

Pago Pago

City

Nairobi

Jeddah

Tehran

Dubai

Karachi

Kabul

Male

Delhi

Colombo

Kathmandu

Dacca

Yangon

Bangkok

Kuala Lumpur

Vientiane

Singapore

Phnom Penh

Ho chi Minh

Default Settings

The table below lists the factory default settings.

Last Memory Setting

Yes : The current setting (last memory) is saved when the camera is turned off.

No : The setting returns to the default setting when the camera is turned off.

∗ : The setting depends on the Memory setting (

1 p.116).

Reset Setting

Yes : The setting returns to the default setting with the Reset function

( 1

p.183).

No : The setting is saved even after reset.

[ A Rec. Mode] Menu Items

Item

Recorded Pixels

Quality Level

White Balance

Focusing Area

AF Setting Focus Limiter

Aux. AF Light

AE Metering

Sensitivity

EV Compensation

Recorded Pixels

Movie Quality Level

Movie SR

Digital Zoom

Instant Review

Default Setting

10M

D (Better)

F (Auto)

J (Multiple)

L (Multi-segment)

AUTO 800

±0.0

640 (640×480)

C (Best)

0.5 sec

Last

Memory

Setting

Yes

∗

Yes

∗

Yes

Reset

Setting

Yes

Page

185

Item

Flash Mode

Drive Mode

Memory

Focus Mode

Zoom Position

MF Position

White Balance

AE Metering

Sensitivity

EV Compensation

Digital Zoom

Green Button

Sharpness

DISPLAY

File #

Saturation

Contrast

Date Imprint

[ H Set-up] Menu

Item

Format

Sound

Date

Adjust

World

Time

Operation Volume

Playback Volume

Start-up Sound

Shutter Sound

Operation Sound

Self-timer Sound

Date Style

Select time

Destination (City)

Destination (DST)

Hometown (City)

Hometown (DST)

186

Default Setting

Off

Green Mode

Standard

Off

Last

Memory

Setting

Yes

Reset

Setting

Yes

Page

Default Setting

According to initial setting

Hometown

Same as

Hometown

Off

According to initial setting

Last

Memory

Setting

Yes

Reset

Setting

Yes

Yes No

Page

Item

Language/

Folder Name

USB Connection

Video Out

Brightness Level

Power Saving

Quick Zoom

Auto Power Off

Guide Display

Reset

Default Setting

According to initial setting

Standard

According to initial setting

5 sec

Off

3 min

Playback Mode Palette Items

Item u Slideshow

Interval

Screen Effect

Sound Effect n Resize o Cropping p Image/Sound Copy s Image Rotation

Color Filter

Digital Filter

& Brightness Filter

[ Movie Edit

Z Red-eye Compensation

Voice Memo

Z Protect r DPOF

Start-up Screen

Y Frame Composite

Default Setting

3 sec

Wipe

According to the taken picture

Built-in → SD memory

According to the degree of rotation

B&W

SOFT

±0.0 EV

Save as Still

Image

Select image/ sound

Select image

According to the taken picture

Last

Memory

Setting

Yes

Last

Memory

Setting

Yes

Reset

Setting

Yes

Reset

Setting

Yes

Page

Page

187

Flash

Mode

Drive

Mode

Focus

Mode

Rec.

Mode menu

Others

Auto

Flash Off

Flash On

Auto + Red-eye

Flash On + Red-eye

Soft Flash

Self-timer

Continuous Shooting

Remote Control

Standard (Autofocus)

Macro

Super Macro

Pan Focus

Infinity

Manual Focus

Recorded Pixels

Quality Level

White Balance

Focusing Area

Focus Limiter

Aux. AF Light

AE Metering

Sensitivity

EV Compensation

Sharpness

Saturation

Contrast

Digital Zoom

Intelligent Zoom

LCD Backlight Off

*1: Fixed to AWB.

*2: Fixed to Multi-segment.

*3: Fixed to Standard.

*4: Fixed to 3M.

*5: Fixed to 5M.

Available functions for each Capture mode

{ : Available × : Not available b A q < z

{ { { { { *16 *16 *16 *16

{ { { { { { { { {

{ { { { { *16 *16 *16 *16

{ { { { { { { { {

{ { { { { { {

{

{ { { { { { {

{

{ { { { { { {

{

{ { { { { { {

{

*1 { { *1 *1 *1 *1 *1 *1

{ { { { { { *13 { {

{ { { { *6 { {

{ { { *6 { { *15

{

*2 { { *2 *2 *2 *2 *2 *2

{ { { { { { { { {

× { { { { { { {

{

*3 { { *3 *3 *3 *3 *3 *3

{ { { { { { { { {

{ { { { { { {

{ { { { { × ×

{

*6: Set to Off. (changeable)

*7: Set to Flash Off. (changeable)

*8: Automatic tracking AF cannot be selected.

*9: Fixed to Spot.

For the Green Mode settings, see p.59.

188

{

{ {

K Y C O

{ { × –

*7 { { { –

{

–

{

{ { {

{

× {

{

{ { {

{

{ { {

{ *14 –

{

*3 *3 *3 {

{

–

*3 *3 *3 {

{

–

{ { {

{

{ *12 –

{ × –

× { {

–

{ *1 *1 *1 *1 {

{ *13 *13 { {

{ { *7 *7 *7

{ *15 *15 { {

{ *10 –

{

*10

–

*2 *2 *2 { *11 –

–

*10: Fixed to Off.

*11: Fixed to Center-weighted.

*12: Available only when Movie SR is set to Off.

*13: Set to Automatic tracking AF.

(changeable)

Auto

Flash Off

Flash On

Auto + Red-eye

Flash On + Red-eye

Soft Flash

Self-timer

Continuous Shooting

Remote Control

Standard (Autofocus)

Macro

Super Macro

Pan Focus

Infinity

Manual Focus

Recorded Pixels

Quality Level

White Balance

Focusing Area

Focus Limiter

Aux. AF Light

AE Metering

Sensitivity

EV Compensation

Sharpness

Saturation

Contrast

Digital Zoom

Intelligent Zoom

LCD Backlight Off

Flash

Mode

Drive

Mode

Focus

Mode

Rec.

Mode menu

Others

*14: Fixed to AUTO.

*15: Available unless Automatic tracking AF is selected.

*16: When the camera recognizes a face, the flash is automatically set to a Red-eye reduction mode.

189

Optional Accessories

A number of dedicated accessories are available for this camera.

Products with an asterisk ( ∗ ) are the same as those supplied with the camera.

Power related accessories

Rechargeable lithium-ion battery D-LI68 ( ∗ )

Battery charger kit K-BC68 ( ∗ )

(Set includes battery charger D-BC68 and AC plug cord.)

AC adapter kit K-AC63

(Set includes AC adapter D-AC63 and AC plug cord.)

Connection cables

USB cable I-USB7 ( ∗ )

AV cable I-AVC7 ( ∗ )

Strap

Chain strap O-ST8

Strap O-ST20 ( ∗ )

Leather strap O-ST24 (genuine leather)

Sports strap O-ST30 (water resistant)

Case

Camera case O-CC66

Remote Control

Remote control unit E (zoom function)

Remote control unit F

190

Messages

Messages such as the following may appear on the LCD monitor during camera operation.

Message

Compression error

No image/sound

Explanation

Compression of the image you captured has failed. Change the quality/size and try again.

There are no images/sounds on the SD Memory Card or in the built-in memory.

Memory card full

Built-in memory full

Image/sound cannot be created

Memory card error

The SD Memory Card or the built-in memory is full and no more images can be saved.

Insert a new SD Memory Card or delete unwanted images.

(p.23, 131)

Change the quality/size and try again. (p.147)

You can only record up to 10,000 files due to the specifications of the camera, even when using a large volume SD Memory Card. Delete unwanted files to continue recording.

Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to play back the images or sounds on a PC.

Card not formatted

Card locked

The SD Memory Card you have inserted is unformatted or has been formatted on a PC or other device and is not

compatible with this camera. (p.168)

The SD Memory Card is write-protected. Only menu operation and mode change are possible.

Data being recorded This is displayed when you switch to Playback mode while the image is being saved or protect setting or DPOF settings are being saved. The message disappears when saving of an image or setting is completed.

Data being processed The image is being recorded on the SD Memory Card or in the built-in memory.

The protect setting or DPOF settings is being changed.

Deleting

Camera cannot play this image and sound

The movie is being recorded.

The image is being processed with digital filter.

The movie is being edited.

The SD Memory Card or built-in memory is being formatted.

The image or sound is being deleted.

You are trying to play back an image or sound in a format not supported by this camera. You may be able to play it back on another brand of camera or PC.

191

Message

Battery depleted

Image folder cannot be created

Protected

This image/sound cannot be processed

No image to be processed

Explanation

The battery is exhausted. Recharge the battery or replace

with charged battery. (p.16)

The largest folder number has been used and the largest file number has been assigned to an image and no more images can be saved. Insert a new SD Memory Card or format the SD Memory Card or built-in memory.

(p. 23, 168)

The image or sound you are trying to delete is protected.

You are trying to resize, crop, protect an image, or you are trying to set an image for DPOF, or you are trying to edit an image with a digital filter or edit a movie while the image or movie cannot be processed with these functions.

There is no file that can be processed with the Playback

Mode Palette.

Messages such as the following may appear on the LCD monitor when using the PictBridge function.

Message Explanation

No paper in the printer There is no paper in the printer.

No ink in the printer There is no ink in the printer.

Printer error

Data error

Paper stuck in the printer

Connection error

Check printer

An error message has been sent from the printer.

A data error message has been sent from the printer.

The paper in the printer has jammed.

Failed to connect to the printer. Check the status of the printer.

192

Troubleshooting

Problem

The camera will not turn on

No image appears on the

LCD monitor

Cause Remedy

The battery is not installed

The battery is installed incorrectly

Check if a battery is installed. If not, install

a battery. (p.16)

Check orientation of the battery and

reinsert it. (p.16)

The battery is exhausted Charge the battery. (p.17)

The battery performance has temporarily deteriorated because it is too cold

Warm up the battery by putting it in a pocket where it can come in contact with body heat.

The LCD monitor is set to Off

The image is displayed but is hard to see

Press the OK/Display button to turn the

LCD monitor On.

The image on the LCD monitor may be hard to see when taking pictures outside in sunlight.

The shutter will not release

The picture is dark

The flash is charging

There is no available space on the SD Memory Card or in the built-in memory.

When the flash icon blinks red on the LCD monitor, the flash is charging and no pictures can be taken. The flash icon lights red when charging is completed.

Insert an SD Memory Card with available

space or delete unwanted images. (p.23,

131)

Recording

The number of image, movie, and sound files recorded on the SD

Memory Card has reached 10,000.

Wait until recording is finished.

Replace the SD card with another having available space or delete unwanted files.

The subject is too far away in a dark environment, such as a night scene

The picture will become dark if the subject is too far away. Take pictures within the specified flash range.

The background is dark When taking a picture of a person against a dark background, such as a night scene, the background may appear dark if the flash does not reach it, even with the correct exposure. Set the capture mode to

A (Night Scene) to ensure that both the person and the background are clear.

(p.74)

193

Problem

The subject is not in focus

The subject is difficult to focus on

Cause

The subject is not in the focusing area

Remedy

The camera may have difficulty in focusing on such subjects as: low-contrast subjects (a white wall, a blue sky, etc.), dark subjects, finely-patterned objects, rapidly-moving objects. It is also difficult to get proper focus when shooting through a window or a net. Try shooting using the

focus lock (p.32) or Manual Focus (p.88).

Locate the desired subject in the focus frame J (focusing area) in the center of the LCD monitor. If it is difficult to do so, first lock the focus on the desired subject

(focus lock), and then move the camera to

recompose. (p.32)

The flash does not discharge

The USB

Connection with a personal computer does not function properly.

The USB

Connection with a printer does not function properly.

The subject is too close Set the focus mode to q (Macro) or r

(Super Macro). (p.87)

The focus mode is set to q (Macro) or r (Super

Macro)

Normal pictures will be out of focus if taken with the focus mode set to q (Macro) or r (Super Macro).

Set the flash mode to Auto or b

. (p.90)

The flash mode is set to

Off

The Capture mode is set to C (Movie) mode,

Continuous Shooting,

Infinity, or E (Pet) mode

The USB Connection setting of the camera is set to PictBridge.

The flash will not discharge in these modes. You can cancel the non-flash setting in (Sport) mode and mode.

E (Pet)

Set the USB Connection setting to PC.

(p.178)

The USB Connection setting of the camera is set to PC.

Set the USB Connection setting to

PictBridge. (p.178)

Very occasionally, static electricity may cause camera malfunction. In this case, remove the battery and install it again. If the camera is then working properly, normal condition is restored and you can continue using the camera.

194

Main Specifications

Camera

Type

Effective Pixels

Sensor

Recorded Pixels

ISO sensitivity

File Format

Quality Level

Storage Medium

Fully automatic compact digital still camera with built-in zoom lens

10.0 megapixels

10.37 megapixels (total pixels), 1/1.8-inch interline transfer CCD with a primary color filter

Still Picture 10M (3648×2736), 7M (3072×2304), 5M (2592×1944),

3M (2048×1536), 2M (1600×1200),

1024 (1024×768), 640 (640×480)

* Fixed to 5M (2592×1944) for Digital SR mode and 3M

(2048×1536) for both Best Framing and Frame Composite modes.

Movie 640 (640×480), 320 (320×240)

AUTO (64 to 800, 64 to 1600 in Digital SR mode)

*You can change the Auto sensitivity range from the menu.

AUTO, Manual (64/100/200/400/800/1600 /3200*)

*3200 available only in Digital SR mode

Still Picture

Movie

JPEG (Exif2.2), DCF, DPOF, PRINT Image Matching III

AVI (MPEG-4 DivX), approx. 30 fps with sound, Movie SR (25 fps image signals recorded at 30 fps)

Sound WAV (PCM system), monaural, max. recording time approx.

8 hours 35 min. 26 sec. (when using a 512 MB SD Memory

Card)

“Best”, “Better”, “Good”

Built-in memory (approx. 22 MB), SD Memory Card, SDHC Memory Card

Image Storage Capacity and Recording Time (When using a 512 MB SD Memory Card)

Still Pictures

Quality Level

Recorded Pixels

10M

1024

640

Movie

Best

147

208

293

444

623

1133

2079

Better

213

302

424

642

900

1638

3004

Good

296

418

588

890

1247

2268

4160

Sound

8 hr.

35 min. 26 sec.

Quality Level

Recorded Pixels

640 (640×480)

320 (320×240)

Best

22 min. 58 sec.

1 hr. 28 min. 53 sec.

Better

28 min. 47 sec.

1 hr. 50 min. 25 sec.

Good

34 min. 33 sec.

2 hr. 7 min. 18 sec.

* The above table indicates the approximate number of images and recording time. The number of images and recording time may vary depending on an SD Memory Card and subject.

195

White Balance

Lens

Intelligent Zoom

Digital Zoom

LCD Monitor

Playback Functions

Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual

Focal Length 7.9 mm - 23.7 mm (equivalent to 38 mm - 114 mm in

35 mm format)

Maximum Aperture f/2.8 - f/5.4

Lens Composition 7 elements in 5 groups (two dual-sided aspherical elements, one single-sided aspherical element)

Zoom Type

Picture Range

Electrically driven

Approx. 65.9 mm

Macro mode)

× 48.8 mm (screen is filled) (Super

Lens Cover Electrically driven

3.6× at 7M (3072 × 2304), 4.2× at 5M (2592 × 1944), 5.3× at 3M

(2048 × 1536), 6.7× at 2M (1600 × 1200), 10.4× at 1024 (1024 × 768),

16.3× at 640 (640 × 480), The ratio of 3× optical zoom included. The ratios are approximate.

Capture Mode 5.4× maximum, or equivalent to 16.3× maximum (3× optical zoom ratio included) in all recorded pixels.

2.5-inch TFT color LCD, approx. 232,000 pixels, with LCD backlight, low reflective type, field of view: approx.100%, wide viewing angle, the brightness of backlight adjustable in two steps or by holding down the OK/

Display button for more than 1 second.

Single-frame, 9 frame index, calendar, enlargement (max. 8×, scrollable), movie playback, sound playback, histogram display, Select & Delete

Playback Mode Palette (Slideshow, Resize, Cropping, Image/Sound Copy,

Image Rotation display, Color Filter, Digital Filter, Brightness Filter, Movie

Edit, Red-eye Compensation, Voice Memo, Protect, DPOF, Start-up

Screen, Frame Composite)

Color filter B&W, Sepia, Color filter (Bar display, Eight colors), B&W +

Red, B&W + Green and B&W + Blue.

Digital filter Soft, Illustration, Special Effect 1, Special Effect 2, Slim

Brightness filter Brightness filter

Focusing System Type

Focusing Range

TTL contrast detection system by sensor, auxiliary AF light, 5-point AF, Spot AF, or Automatic tracking AF selectable, Focus lock is possible by pressing the shutter release button halfway.

∞

Normal: Approx. 0.35 m (full zoom range)

Macro: Approx. 0.12 m - Approx.

0.4 m (at full wideangle to 11.5 mm)

Super Macro: Approx. 0.06 m - Approx. 0.15 m (full wide-angle)

Switchable between infinity, pan focus, and manual focus.

Exposure Mechanism AE Metering TTL metering by sensor (multi-segment, centerweighted, spot)

Exposure Modes Picture modes, Program

EV Compensation ±2 EV (can be set in 1/3 EV steps)

Capture Modes

Movie

Green, Mode Palette (Auto Picture, Program, Night Scene, Movie, Voice

Recording, Landscape, Natural Skin Tone, Flower, Portrait, Kids, Half-length

Portrait, Sport, Surf & Snow, Digital SR, Food, Pet, Text, Frame Composite)

Shooting Time Minimum approx. 1 sec., recordable until the capacity of SD Memory Card reaches full. (The continuous recording is possible until the file size reaches 2 GB.)

Editing

Functions

Save as Still Image, Divide Movies, Extract

196

Shutter speed

Flash

Drive Modes

Self-timer

Time Function

Power Supply

Battery Life

In/Out Port

Video Output Format

Size

Approx. 1/2000 sec. - 4 sec.

Type Auto flash with red-eye reduction function

Flash Modes Auto, Flash Off, Flash On, Auto + Red-eye, Flash On

+ Red-eye, Soft Flash

Effective Range Wide: Approx. 0.06 m - Approx. 7.1 m (for auto ISO sensitivity)

Tele: Approx. 0.35 m - Approx. 3.5 m (for auto ISO sensitivity)

Single-frame, Continuous, 10-sec. Self-timer, 2-sec. Self-timer, 3-sec.

Remote Control, Instant Remote Control

Electronic control type, delay time: approx. 10 sec., 2 sec.

World Time setting for 75 cities (28 time zones)

Rechargeable lithium-ion battery D-LI68, AC adapter (optional)

Still Images Approx. 200 (at 23°C with LCD monitor on, flash fired for 50% of shots and using a rechargeable lithium ion battery D-LI68

* The number of recordable images are based on the

CIPA standard measurement, but it may vary with the conditions under which the camera is used.

Playback time Approx. 170 min.

* Measured based on PENTAX standard and may vary depending on the condition of use.

Approx. 115 min.

Maximum charging time

USB/AV terminal (PC communication type USB 2.0, high-speedcompatible), external power supply terminal

NTSC, PAL

87 (W) × 54 (H) × 21 (D) mm (excluding operating members and projections)

Weight 110 g (excluding battery and SD Memory Card)

Weight When Shooting 130 g (including battery and SD Memory Card)

Accessories Rechargeable lithium-ion battery, battery charger, AC plug cord, USB cable, software (CD-ROM), AV cable, strap, operating manual

197

WARRANTY POLICY

All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized PENTAX service facilities.

Procedure During 12-month Warranty Period

Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there is no representative of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.

198

• This warranty policy does not affect the customer’s statutory rights.

• The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.

The CE Mark is a Directive conformity mark of the European

Union.

199

For customers in USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Pour les utilisateurs au Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FOR CALIFORNIA, U.S.A. ONLY

Perchlorate Material-special handling may apply.

The lithium battery used in this camera contains perchlorate material,which may require special handling.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

200

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We: PENTAX IMAGING COMPANY

A Division of PENTAX of America, Inc.

Located at: 600 12

Street, Suite 300

Golden, Colorado 80401 U.S.A.

Phone: 303-799-8000 FAX: 303-790-1131

Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.

Product Name: PENTAX Digital Still Camera

Model Number: Optio S10

Contact person: Customer Service Manager

Date and Place: August, 2007, Colorado

201

Information on disposal for users

1. In the European Union

If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. There exists a separate collection system for these products.

Used electric/electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.

Following the implementation by member states, private households within the EU states may return their used electrical/electronic equipments to designated collection facilities free of charge*. In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one.

* Please contact your local authority for further details.

By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

2. In other countries outside the EU

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.

202