Playback/Deleting/Editing. Pentax Optio Optio S-10, S10, Optio S10, 19342 - Optio S10 10MP Digital Camera
Reklamë
Reklamë
Playback/Deleting/Editing
Playing Back Images
You can enjoy playback of images saved on the SD Memory Card and the built-in memory.
Shutter release button
Zoom button
Four-way controller
MENU button
Playing Back Still Pictures
Press the Q Playback button.
When an SD Memory Card is installed
?
appears in the upper right corner of the LCD monitor and the images recorded on the SD Memory Card are played back.
When no SD Memory Card is installed
@ appears in the upper right corner of the LCD monitor and the images recorded in the built-in memory are played back.
Zoom Display
You can display images magnified up to eight times.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image to magnify.
2
Press x / y on the zoom button.
Each time you press the button, the zoom scaling changes as follows: 1.3×, 2.0×, 2.6×,
4.0×, 5.3×, 8.0×. You can use the guide at the bottom left of the screen to check which portion of the image is magnified.
Guide
Four-way controller ( 2345 ) : Moves the position for magnification.
Zoom button ( x ) : Enlarges the image.
Zoom button ( w ) : Diminishes the image.
6
123
6
124
3
Press the MENU button.
Zoom playback ends.
Setting the Quick Zoom Function
You can display the image at maximum magnification simply by pressing x / y on the zoom button once during zoom playback.
1
Press the MENU button.
The [ A Rec.Mode] menu appears.
2
Press the four-way controller ( 5 ).
3
Use the four-way controller ( 23 ) to select [Quick Zoom].
4
Use the four-way controller ( 45 ) to select [ O (On)/ P (Off)].
5
Press the shutter release button halfway.
Video Out
Brightness Level
Power Saving
Quick Zoom
Auto Power Off 3min
MENU Exit
Set-up
USB Connection PC
NTSC
5sec
The camera is ready for taking pictures.
Calling Up the Images from the Built-in Memory
If you store your favorite images and sounds in the built-in memory, you can play them anytime you wish. (My album function)
You can call them up from the built-in memory with the SD Memory Card installed in the camera.
1
With the SD Memory Card installed, hold down the Q
Playback button for more than 4 seconds in Capture mode.
The lens retracts two seconds after you press the Q button. The images and sounds in the built-in memory are played back after two more seconds.
• You can play back “my album” in the same way as you play back images and sounds recorded on the SD Memory Card.
• Stop the playback of “my album” first to do the followings.
- To play back the images on the SD Memory Card.
- To copy files between the SD Memory Card and the built-in memory.
- To format an SD Memory Card or the built-in memory.
• To stop the playback of “my album”, do either of the followings.
- Press the Q Playback button or press the shutter release button halfway. The camera returns to the Capture mode.
- Turn off the camera.
Zoom button
Playback button
Four-way controller
OK button
Playing Back Movies
You can play back movies (with the sounds). A guide to operation appears on the LCD monitor during playback. Operations include playback, frame by frame playback (forward or reverse), pause and volume adjustment.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the movie to play back.
2
Press the four-way controller ( 2 ).
Playback starts.
• The following operations can be performed during playback.
Four-way controller ( 4 ) : Plays back in fast rewind.
Four-way controller ( 5 ) : Plays back in fast forward.
Four-way controller ( 2 ) : Pauses the movie.
OK button : Changes the display mode. ( 1
Zoom button ( w / x ) : Adjusts the volume.
• The following operations can be performed during pause.
Four-way controller ( 4 ) : Reverses the movie frame by frame.
Four-way controller ( 5 ) : Advances the movie frame by frame.
Four-way controller ( 2 ) : Restarts playback.
OK button : Changes the display mode. ( 1
3
Press the four-way controller ( 3 ).
Playback stops and the screen returns to the first frame.
4
Press the Q Playback button.
The camera returns to Capture mode.
No sound is output during fast-rewind and fast-forward playback.
6
125
Displaying Shooting Information in Playback Mode
In the Playback mode, press the OK/Display button to switch the “display modes”. There are 3 display modes for the Playback mode.
Normal Display
Shooting information is displayed.
1 Voice Memo icon
2 Card/Built-in memory icon
3 Folder name 4 File name
5 Protect icon 6 Battery indicator
7 Shooting date and time
8 Four-way controller operation guide
1 2 3 4 5
8 7 6
6
Histogram Display
The brightness distribution of the image is displayed. The horizontal axis shows the brightness (darkest at the left end and brightest at the right end) and the vertical axis shows the number of pixels.
1 Recorded pixels 2 Quality level
3 White balance 4 AE metering
5 Sensitivity
7 Aperture
6 Histogram
8 Shutter speed
10
M
8 7
1 2 3 4 5
No icons
No shooting information is displayed.
6
126
Saving the Display Mode 1
Normal Display
• If you press and hold the OK/Display button for more than 1 second, the LCD Bright Mode is activated. The LCD monitor turns brighter for a certain amount of time. ( 1
• The histogram display is not available while playing back movies.
Zoom button
Four-way controller
OK button
Nine-Image Display/Calendar Display
Nine-Image Display
You can display nine images at the same time.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select an image.
2
Press w / f on the zoom button.
Nine thumbnails of images are displayed at a time. The thumbnails change nine at a time, page by page.
Four-way controller
( 2345 )
: Moves the frame.
Four-way controller ( 4 ) : Displays the previous page when the frame is on the
Select&Delete 100-0010
Selected image upper-left image. (Available only when ten or more files are saved.)
Four-way controller ( 5 ) : Displays the next page when the frame is on the lower-right image. (Available only when ten or more files are saved.)
The icons that appear on the images indicate the following:
No icon : Still picture without voice memo
O (with image) : Still picture with voice memo
C : Movie (The first frame of the movie is shown.)
O (without image) : Sound file only
: Undisplayable image
3
Press the OK button.
The selected image is displayed full screen.
You can also display the selected image full screen by pressing the
MENU button or x / y on the zoom button in Step 3.
6
127
6
Calendar Display
In calendar display, the recorded images and sound files are displayed by date in calendar format. You can select images by date of shooting/ recording.
1
In Playback mode, press w / f on the zoom button.
Nine thumbnails of images appear.
2
Press w / f on the zoom button.
SUN MON TUE WED THU FRI SAT
The nine-image display changes to the calendar display.
3
Use the four-way controller
( 2345 ) to select a desired date on the calendar.
7
28
1
8
29
2 3
30 31
4 5 6
9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 27
2007.01
Four-way controller : Moves the frame
( 2345 ) on the calendar.
Selected date
Four-way controller ( 4 ): When the frame is on the first day of the month, goes back to the previous month.
Four-way controller ( 5 ): When the frame is on the last day of the month, goes to the next month.
4
Press the OK button or x / y on the zoom button.
OK button : Displays on full screen the first image recorded on the selected date.
Zoom button ( x / y ): Displays the images recorded on the selected date in nine-image display.
• O appears on the date on which a sound file (without image) was first recorded. The first frame of the movie appears on the date on which movie was first recorded.
• Press the MENU button in calendar display to return to the previous nine-image display.
128
Four-way controller
OK button
Slideshow
You can play back all the images on the SD Memory Card or in the built-in memory continuously.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image with which to start the slideshow.
2
Press the four-way controller ( 3 ).
Slideshow
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (Slideshow).
4
Press the OK button.
MENU Cancel OK OK
5
Use the four-way controller ( 45 ) to change the playback interval.
Select from the following: [3 sec], [5 sec],
[10 sec], [20 sec], [30 sec].
6
Use the four-way controller ( 3 ) to select [Screen Effect].
Interval
MENU
3sec
OK
6
129
6
7
Use the four-way controller ( 45 ) to select the effect.
Wipe
Fade
The effect is like a slide show that slides the displayed images one by one to the left.
The current image gradually disappears and the next image appears under it.
The current image shrinks towards the center.
Shrink
Off No screen effect.
8
Use the four-way controller ( 3 ) to select [Sound Effect].
9
Use the four-way controller ( 45 ) to select [ O (On)/ P
(Off)].
10
Press the OK button.
[Start] appears on the LCD monitor and playback starts at the set interval.
OK button : Pauses the slideshow. Press again to restart the slideshow.
A button other than OK button: Stops the slideshow.
• The slideshow will continue until you press any button.
• Movies and pictures with a voice memo will be played through to the end before the next picture is played back, regardless of the set playback interval.
• Recordings made in Voice Recording mode are not played back.
130
Deleting Images, Movies and Sounds
Four-way controller
OK button
Green button
MENU button
Deleting a Single Image, Movie or Sound
You can delete a single image, movie or sound.
Once deleted, images, movies or sounds cannot be restored.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image, movie or sound to delete.
2
Press the Green / i button.
The Delete screen appears.
3
Use the four-way controller ( 2 ) to select [Delete].
4
Press the OK button.
The image, movie or sound is deleted.
Cancel
OK
• You can also delete images during the Instant Review. ( 1
• You cannot delete protected images, movies or sounds. ( 1
6
131
6
Deleting a Voice Memo only
If an image has a voice memo, you can delete the voice memo without deleting the image.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select an image with a voice memo to delete.
2
Press the Green button.
The Delete screen appears.
3
Use the four-way controller ( 2 ) to select [Delete sound].
4
Press the OK button.
The voice memo is deleted.
Cancel
OK
Select Delete in Step 3 above to delete both the image and the voice memo.
132
Four-way controller
OK button
Green button
Deleting All Images
You can delete all the images, movies and sounds at once.
Once deleted, images, movies or sounds cannot be restored.
1
Enter the Playback mode and press the Green button twice.
The Delete All screen appears.
2
Use the four-way controller ( 2 ) to select [Delete All].
3
Press the OK button.
All the images and sounds will be deleted.
MENU
Cancel
OK
You cannot delete protected images, movies or sounds. ( 1
6
133
Zoom button
Four-way controller
OK button
Green button
6
Deleting Selected Images and Sound Files
(from Nine-Image Display)
You can delete several images/sound files selected from the nine-image display at once.
1
Enter the Playback mode and press w / f on the zoom button.
Nine thumbnail images appear.
2
Press the Green button.
[ P ] appears on the images and sound files.
Select & Delete 100-0010
3
Use the four-way controller
( 2345 ) to move the frame to an image or sound file you want to delete, and press the OK button.
[ O ] appears on the selected images and sound files.
To check the image before deleting, place
MENU Cancel Delete OK the frame on the image and press x / y on the zoom button to show it in single-image display. (You cannot show a protected image in singleimage display.)
Press the OK button to return to the nine-image display.
134
4
Press the Green button.
A confirmation dialog appears.
5
Use the four-way controller ( 23 ) to select
[Select & Delete].
6
Press the OK button.
The selected images and sound files are deleted.
You cannot delete protected images, movies or sounds. ( 1
6
135
Four-way controller
OK button
6
Protecting Images, Movies and Sounds from
Deletion (Protect)
You can protect images, movies and sounds from being accidentally deleted.
1
Enter the Playback mode and use the four-way controller
( 45 ) to select the image, movie or sound to protect.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select Z (Protect).
4
Press the OK button.
The Protect screen appears.
Protect
MENU Cancel OK OK
Protecting Images, Movies and Sounds
5
Use the four-way controller ( 23 ) to select [Single image/sound].
6
Press the OK button.
Single image/sound
OK
136
7
Use the four-way controller ( 23 ) to select [Protect].
8
Press the OK button.
Protect
OK
• Select Unprotect in Step 7 to cancel the Protect setting.
• If the image, movie or sound is protected, the Z icon appears when it is played back.
Protecting All Images, Movies and Sounds
You can protect all the images, movies and sounds.
5
Use the four-way controller ( 23 ) to select [All Images/Sounds].
6
Press the OK button.
The [Protect all images/sounds] message appears.
All Images/Sounds
OK
7
Use the four-way controller ( 23 ) to select [Protect].
8
Press the OK button.
Protect
OK
Select Unprotect in Step 7 to cancel the Protect setting on all the images, movies and sounds.
Even protected images, movies and sounds will be deleted by formatting the SD Memory Card or built-in memory.
6
137
Viewing Images on AV Equipment
1
VIDEO
AUDIO
(L) (R)
2
6
By using the AV cable, you can capture, play back and dub images on a TV or other equipment with a video IN jack. Make sure that both the AV equipment and the camera are turned off before connecting the cable.
1
Open the terminal cover and connect the AV cable supplied with the PC/AV terminal.
2
Connect the other end of the AV cable to the AV equipment.
Yellow (video) video input terminal
White (audio) sound input terminal
When using stereo sound equipment, insert the sound jack into the L
(white) terminal.
3
Turn the AV equipment on.
When the AV equipment connected to the camera and the AV equipment used to view images are separate, turn both pieces of equipment on.
To view images on a TV with several video inputs, switch the video inputs to the one connected to the camera, referring to the operating manual for the TV.
4
Turn the camera on.
Changing the Video Output Format 1
138
• If you intend to use the camera for a long time, use of the AC adapter kit K-AC63 (optional) is recommended. Refer to the operating manual for the TV or equipment to which the camera is connected.
• Images may not be displayed properly depending on the countries or areas when the Video Out setting is the default. In this situation, change the Video Out setting.
• While the camera is connected to the TV, the LCD monitor of the camera is turned off.
Playing Back an Image Using the Remote Control
Unit (optional)
When the AV cable is connected to the camera, the image can be displayed using the remote control unit E or F (optional).
1
Press the Q Playback button.
2
Press the shutter release button or the zoom button on the remote control unit.
Shutter release button : Displays the next image.
Zoom button : Displays the previous image.
6
• As there is no zoom button on the remote control unit F, only the shutter release button (displaying the next image) is available.
• You cannot play back movies, images with a voice memo, and sound files recorded in Voice Recording mode, using the remote control unit.
139
Setting the Printing Service (DPOF)
You can print the images on the SD Memory Card using a DPOF (Digital
Print Order Format) compatible printer or at a printing service.
Four-way controller
OK button
Green button
6
Printing Single Images
Set the following items for each image.
[Copies]: Select the number of copies up to a maximum of 99.
[Date] : Specify whether you want the date imprinted on the print or not.
1
Enter the Playback mode and use the four-way controller ( 45 ) to select the image to print.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (DPOF).
4
Press the OK button.
The DPOF screen appears.
DPOF
MENU Cancel OK OK
5
Press the OK button.
Single Image
OK
140
6
Use the four-way controller ( 23 ) to select the number of copies.
MENU OK
7
Use the Green button to select
[ O (On)/ P (Off)] of [Date].
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
8
Press the OK button.
Prints can be made according to the settings.
MENU OK
• If DPOF settings have already been made for an image, the previous number of copies and date setting will be displayed.
• To cancel DPOF settings, set the number of copies to 0 and press the OK button.
• You cannot set the printing service for movies or sound-only files.
• Depending on the printer or printing equipment at the photo processing lab., the date may not be imprinted on the pictures even if the DPOF settings were made.
6
141
Four-way controller
OK button
Green button
6
Printing All Images
1
Enter the Playback mode and press the four-way controller ( 3 ).
The Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select
(DPOF).
3
Press the OK button.
4
Use the four-way controller ( 3 ) to select [All Images].
5
Press the OK button.
6
Use the four-way controller ( 23 ) to select the number of copies.
You can print up to 99 copies.
7
Use the Green button to select whether to insert the date or not.
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
8
Press the OK button.
Prints can be made according to the settings.
MENU OK
The number of copies specified in the DPOF settings applies to all the images. Before printing, check that the number is correct.
• Settings for single images are canceled when settings are made for all images.
• DPOF settings are not possible for movies.
142
Direct Printing Using PictBridge
By connecting the camera to a printer that supports PictBridge using the
USB cable (I-USB7) supplied with the camera, you can print images directly from the camera without using a PC. Select the images you want to print and the number of copies on the camera after it has been connected to the printer.
• We recommend the use of the AC adapter kit K-AC63 (optional) while the camera is connected to the printer. The printer may not work properly or the image data may be damaged if the battery runs out of power while the camera is connected to the printer.
• The access lamp blinks slowly while data is being transferred from the camera to the printer.
• Do not disconnect the USB cable during data transfer.
• Depending on the type of printer, not all the settings made on the camera (such as DPOF settings) may be valid.
• [USB Connection] is set to [PC] by default. Do not connect the camera to a printer when [PC] is selected.
6
Connecting the Camera to the Printer
1
Select [PictBridge] for [USB Connection] on the
[ H Set-up] menu.
Changing the USB Connection Mode 1
2
Connect the camera to the printer using the USB cable supplied with the camera.
The PictBridge menu appears.
Single Image
OK
143
Printing Single Images
1
Use the four-way controller ( 23 ) to select [Single Image].
2
Press the OK button.
The Print this image screen appears.
Single Image
OK
6
3
Use the four-way controller ( 45 ) to select the image to print.
4
Use the four-way controller ( 23 ) to select the number of copies.
You can print up to 99 copies.
5
Use the Green button to select whether to insert the date or not.
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
6
Press the OK button.
The print settings confirmation screen appears.
To print the image according to the print settings on the printer, press the OK button.
To change the print settings, go to Step 7.
7
Press the Green button.
The Change setting screen appears.
8
Select [Paper Size] and press the four-way controller ( 5 ).
MENU
PictBridge
Paper Size
Paper Type
Quality
Border Status
OK
OK
Setting
Setting
Setting
Setting
MENU
144
9
Use the four-way controller
( 2345 ) to select the paper size.
You can select only the paper sizes available with the printer you are using.
10
Press the OK button.
11
Repeat Step 8 to 10 to set
[Paper Type] [Quality] and [Border
Status].
The image is printed according to the settings.
Press the MENU button to cancel printing.
Paper Size
Setting
Card
L
100x150
Postcard
4”x6”
MENU Cancel
2L
8”x10”
A4
Letter
11”x17”
A3
When the Paper Size is set to [ Setting], images are printed according to the printer settings.
Paper Type with more E ’s supports higher quality paper.
Quality with more E ’s indicates higher print quality.
12
Press the OK button twice.
OK OK
Printing All Images
1
Use the four-way controller ( 23 ) to select [All Images].
2
Press the OK button.
The All Images screen appears.
Use the four-way controller ( 45 ) to check the images and make sure you want to print them all.
3
Confirm the number of copies, the setting of the date, and the print setting, and then start printing.
MENU OK
To set these items and print the images, refer to Steps 4 to 11 on
“Printing Single Images” (pages 144 to 145).
6
145
Printing Using the DPOF Settings
1
Use the four-way controller ( 23 ) to select
[DPOF AUTOPRINT].
2
Press the OK button.
The DPOF AUTOPRINT screen appears.
Use the four-way controller ( 45 ) to check the images and the print settings.
3
Confirm the number of copies, the setting of the date, and the print setting, and then start printing.
MENU OK
To set the number of copies and the date imprint, refer to “Setting the
Printing Service (DPOF)” (p.140). To print the images, refer to Steps 4
to 11 on “Printing Single Images” (pages 144 to 145).
6
Disconnecting the Camera from the Printer
Disconnect the camera from the printer when you have finished printing.
1
Turn the camera off.
2
Disconnect the USB cable from the camera.
3
Disconnect the USB cable from the printer.
If you disconnect the USB cable from the camera before you turn the camera off, the camera returns to Playback mode.
146
Editing Images
Four-way controller
OK button
Changing the Image Size and Quality
By changing the size and quality of a selected image, you can make the file smaller than the original. You can use this function to continue taking pictures when the card or memory is full, by making the images smaller and overwriting the original images to make more space available in the memory.
Resizing Single Images
After changing the size and quality, the image can be saved as a new image or written over the original image.
1
Use the four-way controller ( 45 ) in Playback mode to select an image to resize.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (Resize).
4
Press the OK button.
The Resize screen appears.
Resize
6
MENU Cancel OK OK
147
6
5
Use the four-way controller ( 45 ) to change the size.
6
Press the four-way controller ( 3 ).
The frame moves to [Quality Level].
7
Use the four-way controller ( 45 )
Recorded Pixels 10
M
MENU OK to change the quality.
8
Press the OK button.
9
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
10
Press the OK button.
The resized image is saved.
• Movies cannot be resized.
• You cannot select a larger size than that of the original image.
• You can resize the data to 9M, 8M, 6M or 4M.
• Protected images cannot be overwritten.
• You can resize only still pictures taken with this camera.
148
Zoom button
Four-way controller
OK button
MENU button
Cropping Images
You can crop a part of a picture and save it as a separate image.
1
Use the four-way controller ( 45 ) in Playback mode to select an image to crop.
2
Press the four-way controller ( 3 ).
Cropping
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select (Cropping).
6
OK OK MENU
4
Press the OK button.
The Cropping screen appears.
5
Crop the image.
Zoom button ( x ) : Enlarges the cropping frame.
Zoom button ( w ) : Reduces the cropping MENU frame.
Four-way controller : Moves the cropping
( 2345 )
MENU button frame.
: Returns to the Mode Palette.
6
Press the OK button.
The cropped image is saved as a separate image.
Cancel
• Movies cannot be cropped.
• The image size is changed and saved.
• You can only crop still pictures taken with this camera.
OK
149
Playback button
Four-way controller
OK button
6
Rotating the Displayed Image
You can rotate a displayed image on the LCD monitor.
1
In Playback mode, use the four-way controller ( 45 ) to select the image to be rotated.
2
Press the four-way controller ( 3 ) in Playback mode.
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select s
(Image Rotation).
4
Press the OK button.
The Image Rotation screen appears.
Image Rotation
MENU Cancel OK OK
5
Press the four-way controller ( 5 ) or the four-way controller ( 4 ).
Four-way controller ( 5 ): Rotates the image
90 degrees clockwise each time you press the 2.0 x button.
MENU OK
Four-way controller ( 4 ): Rotates the image 90 degrees counter clockwise each time you press the button.
6
Press the Q button.
The camera saves the rotated image and returns to Playback mode.
• You can rotate protected ( Z ) images, but the rotated image will not be saved.
• You cannot rotate movies.
150
Four-way controller
OK button
Editing Pictures with Color Filters
This function enables you to edit still pictures with color filters.
You can select from thirteen filters: [B&W], [Sepia], [Eight colors], [B&W
+ Red], [B&W + Green], and [B&W + Blue].
1
Use the four-way controller ( 45 ) in Playback mode to select an image to edit.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select
(Color Filter).
Color Filter
6
MENU Cancel OK OK
4
Press the OK button.
The color filter screen appears.
5
Use the four-way controller ( 23 ) to select a desired filter.
6
Press the OK button.
MENU OK
The overwrite confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
151
6
Selecting the Color Filter (Eight Colors)
5
Use the four-way controller ( 23 ) to select (Eight colors).
The color bar appears.
6
Use the four-way controller ( 45 ) to select a desired color.
7
Press the OK button.
The Overwrite confirmation screen appears.
8
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
9
Press the OK button.
MENU OK
The edited image is saved with the same number of recorded pixels and quality level as the original.
152
Four-way controller
OK button
Editing Pictures with the Digital Filter
This function enables you to apply special effects to still pictures with the digital filter. You can select from five filters: [Soft], [Illustration], [Special
Effect 1], [Special Effect 2] and [Slim].
1
Use the four-way controller ( 45 ) in Playback mode to select an image to edit.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select
(Digital Filter).
Digital Filter
6
4
Press the OK button.
The Digital Filter screen appears.
5
Press the four-way controller
( 23 ) to select a desired filter.
6
Press the OK button.
The overwrite confirmation screen appears.
MENU Cancel
MENU
OK OK
SOFT
1
2
OK
153
6
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
Selecting the Slim Filter
5
Press the four-way controller
( 23 ) to select (Slim Filter).
6
Press the four-way controller
( 45 ) to adjust the strength of the slim effect.
7
Press the OK button.
SOFT
1
2
The overwrite confirmation screen appears.
8
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
9
Press the OK button.
MENU OK
The edited image is saved with the same number of recorded pixels and quality level as the original.
154
Four-way controller
OK button
Editing Pictures with Brightness Filter
This function enables you to adjust the brightness of still pictures with the brightness filter.
1
Use the four-way controller ( 45 ) in Playback mode to select an image to edit.
2
Press the four-way controller ( 3 ).
Brightness Filter
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select &
(Brightness Filter).
Cancel OK MENU OK
4
Press the OK button.
The brightness filter screen appears.
5
Use the four-way controller ( 45 ) to adjust the brightness.
Four-way controller ( 5 ): Brightens the image.
Four-way controller ( 4 ): Darkens the image.
MENU OK
The brightness is selected between -2.0EV and +2.0EV by 1/3EV step.
6
155
6
6
Press the OK button.
The overwrite confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
8
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
156
Four-way controller
OK button
Editing Movies
You can select a frame from a recorded movie to save as a still picture or divide a movie into two.
1
Use the four-way controller ( 45 ) in Playback mode to select a movie to edit.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select
(Movie Edit).
4
Press the OK button.
Movie Edit
The Movie Edit screen appears. Select the editing function that you want to use.
MENU Cancel OK OK
6
Saving a Frame from a Movie as a Still Picture
5
Use the four-way controller ( 23 ) to select [Save as Still Image].
6
Press the OK button.
The screen for choosing a frame appears.
Save as Still Image
OK
157
6
7
Press the four-way controller ( 2 ) to play back a movie. Press ( 2 ) again to pause the movie at the point you want to save.
The following operations are available during pause.
Four-way controller ( 4 ): Reverses the movie frame by
MENU frame.
Four-way controller ( 5 ): Advances the movie frame by frame.
8
Press the OK button.
The selected frame is saved as a still picture.
OK
Dividing a Movie
5
Select [Divide Movies] on the Movie Edit screen.
6
Press the OK button.
The screen for choosing the dividing position appears.
7
Press the four-way controller ( 2 ) to play back a movie. Press ( 2 ) again to pause the movie at the desired dividing position.
The following operations are available during pause.
Four-way controller ( 4 ): Reverses the movie frame by frame.
MENU
Four-way controller ( 5 ): Advances the movie frame by frame.
8
Press the OK button.
The confirmation screen appears.
9
Use the four-way controller ( 23 ) to select [Divide].
10
Press the OK button.
Divide
The movie is divided at the specified position and the two portions are saved as separate files.
OK
OK
158
Extracting Movies
5
Select [Extract] on the Movie Edit screen.
6
Press the OK button.
The Extract screen appears.
7
Press the four-way controller ( 2 ) to play back the movie and press it again to select the desired start point.
The movie is paused.
The following operations are available during pause.
MENU
Four-way controller ( 5 ): Advances the movie frame by frame.
Four-way controller ( 4 ): Reverses the movie frame by frame.
8
Press the OK button.
9
Press the four-way controller ( 2 ) to play back the movie and press it again to select the desired end point.
The movie is paused.
The following operations are available during pause.
MENU
Four-way controller ( 5 ): Advances the movie frame by frame.
Four-way controller ( 4 ): Reverses the movie frame by frame.
10
Press the OK button.
The extracted movie is saved.
OK
OK
6
159
Zoom button
Four-way controller
OK button
Green button
6
Removing Red-eye
You can remove red-eye (a phenomenon that occurs when the flash reflects from the subject’s eyes) from your pictures.
1
In Playback mode, press the four-way controller ( 45 ) to select the image you want to correct.
2
Press the four-way controller ( 3 ).
The Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select Z (Red-eye
Compensation).
4
Press the OK button.
Red-eye Compensation
A confirmation dialog for overwriting the image appears.
MENU Cancel OK OK
If the error message [Cannot process correctly] appears, go to the step 5 in “Removing Red-eye Manually”
5
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
When the image is protected, [Save as] will be selected automatically.
6
Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
• Red-eye compensation function cannot be used for movies. If you try to do so, the error message will appear as described in step 4.
• Red-eye compensation function can only be used for still pictures taken with this camera.
160
Removing Red-eye Manually
If the camera does not detect the red-eye, remove it manually.
5
Press the OK button.
The message [Select the area to compensate] and the screen for specifying the area for compensation appears.
6
Specify the area for compensation.
Four-way controller : Moves the area.
( 2345 )
Zoom button ( x ) : Enlarges the area.
Zoom button ( w ) : Reduces the area.
7
Press the Green button.
MENU OK
Fix R-eye Complete
Compensation starts.
When no error message appears, the compensation was successfully done. Go to the step 8.
If the error message [Cannot process correctly] appears, repeat the steps 5, 6 and 7.
8
Press the OK button.
A confirmation dialog for overwriting the image appears.
9
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
When the image is protected, [Save as] will be selected automatically.
10
Press the OK button.
The corrected image is saved with the same number of recorded pixels and quality level as the original.
6
161
Four-way controller
OK button
Green button
6
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are three frames already stored in the camera.
1
Use the four-way controller ( 45 ) in Playback mode to select the image to which you want to add a frame.
Frame Composite
2
Press the four-way controller ( 3 ).
Cancel The Mode Palette appears.
3
Use the four-way controller ( 2345 ) to select Y
(Frame Composite).
MENU OK
4
Press the OK button.
The frame selection screen appears.
5
Use the four-way controller ( 45 ) to select a frame.
OK
OK
162
6
Press the OK button.
A confirmation dialog for overwriting the image appears.
7
Use the four-way controller ( 23 ) to select [Overwrite] or [Save as].
The save options selection screen does not appear for protected images because the
“Save as” option is always used.
OK
8
Press the OK button.
The edited image is saved with the recorded pixels of 3M.
The frame composite function cannot be used on movies or images with a size of 2M or smaller. An error message appears in Step 4.
To Register a New Frame
To switch to the screen for registering a frame, press the Green button in Step 5. You can register frames which you have downloaded from the internet, etc. When you register a new frame, it replaces one of the existing frames in the built-in memory. Before you can register a new frame, copy it first to the SD Memory Card.
When a new frame on the SD Memory Card is registered in the builtin memory, it replaces one of the existing frames in the built-in memory. The replaced frame is deleted from the built-in memory.
1
In the frame selection screen, select the frame you want to remove and press the Green button.
A message appears and the frames on the SD Memory Card that you can register in the built-in memory appear.
2
Use the four-way controller ( 45 ) to select the frame you want to register and press the OK button.
The frame is registered in the built-in memory and replaces the frame selected in Step 1.
Visit the PENTAX website at the URL below to download new frames.
http://www.pentax.co.jp/english/support/digital/frame_02.html
6
163
Copying Files
Four-way controller
OK button
6
You can copy image and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when a card has been inserted in the camera.
When files are copied from the built-in memory to the SD Memory Card, all the files are copied at once. When files are copied from the SD
Memory Card to the built-in memory, the files are copied one at a time.
1
Press the four-way controller ( 3 ) in Playback mode.
The Mode Palette appears.
2
Use the four-way controller
( 2345 ) to select
(Image/Sound Copy).
3
Press the OK button.
Image/Sound Copy
The Image/Sound Copy screen appears.
Select the copying method you want to use.
MENU Cancel OK OK
Be sure to turn the camera off before inserting or removing the SD
Memory Card.
164
To Copy Files from the Built-in Memory to the SD Memory Card
4
Use the four-way controller ( 23 ) to select [ ] and press the
OK button.
All the files are copied to the SD Memory
Card.
OK
To Copy Files from the SD Memory Card to the Built-in Memory
4
Use the four-way controller ( 23 ) to select [ ] and press the OK button.
5
Use the four-way controller ( 45 ) to select the file to copy.
6
Press the OK button.
The selected file is copied to the built-in memory.
MENU OK 6
• If the image has a voice memo, the sound file will be copied at the same time as the image.
• When a file is copied from the SD Memory Card to the built-in memory, it is assigned a new file name.
165
Shkarko
Lidhja publike u përditësua
Lidhja publike për bisedën tuaj është përditësuar. You may view and manage your chat links after registration here.
Lidhja publike e dokumentit
Reklamë