RoadKing RKING2000 User Manual

RKING2000
Noise-Canceling Mono
Bluetooth® Headset
User Manual
-1-
Contents:
Product Overview ------------------------------------------------------------------- 3
Basic Operation --------------------------------------------------------------------- 4
Bluetooth Pairing and Connection
-------------------------------------------- 5
Connection with Two Devices ---------------------------------------------------- 6
LED Indicator
----------------------------------------------------------------------- 7
Charging ------------------------------------------------------------------------------ 8
Product Specifications
----------------------------------------------------------- 9
Notes and Q & A ------------------------------------------------------------------- 10
-2-
Product Overview
Package Contents:
A. Bluetooth headset RKING2000 x 1
B. Micro USB charging cable x 1
C. User manual x 1
D. Car charger x 1
E. Sponge microphone cover x 1
F. Drawstring bag x 1
3
Basic Operation
Button
MFB
Volume +
Volume -
Function
Operation Instructions
Power on
When device is off, press and hold the MFB for 2 seconds to
power on.
Power off
When device is on, press and hold the MFB for 3 seconds to
power off.
Enter pairing
mode
When device is off, press and hold the MFB for 3-4 seconds
to enter into pairing mode.
When under disconnected standby mode, short click the MFB
to enter into pairing mode.
Play / Pause
Redial a call
Short click when listening to music.
Double-click the MFB to dial the last number called.
Voice dial
Hold down the MFB for 1 second, then release.
Answer a call
Short click when call is incoming
End a call
To end a call, short click the MFB.
Reject a call
To decline an incoming call, hold down the MFB for 1
second.
Volume up
Short click the Volume + button to increase volume.
Next song
Hold down the Volume + button to skip to the next song.
Volume down
Short click the Volume - button to decrease volume.
Previous song
Hold down the Volume - button to go back to the previous
song.
4
Bluetooth Pairing and Connection
A. When device is off, press and hold the Multi-Function Button (MFB) for
3-4 seconds to enter into pairing mode. The blue & red lights should
alternate flashing.
B. Search and click "RK2000" to connect the headset to your phone's
Bluetooth. Once connected, the blue LED light will flash, and you can
now play music from your phone to the headset.
C. You can press the MFB and Volume +/- on the Bluetooth headset to
control calls and music.
5
Connection with Two Devices
A. Follow instructions on page 5 to connect first phone, then turn off the
Bluetooth function on the first phone.
B. Press and hold the MFB for 3-4 seconds to enter into pairing mode
again, you'll see the red & blue LED lights flash alternately.
C. Search and click "RK2000" on the second phone's Bluetooth list. The
LED will flash blue once connected.
D. Turn the first phone's Bluetooth back on and reconnect to "RK2000".
The headset will now be connected to two phones.
Note:
Music can only be played from one phone at a time. When you want to play
music from the other phone, you will need to pause or close the music of the
previous phone. The same applies during talking status.
6
LED Indicator
Mode
LED Indicator
Power on
The blue LED light flashes for 2 seconds
Power off
The red LED light flashes for 2 seconds
Pairing mode
The blue & red LED lights flash alternately
Disconnected standby
mode
The blue LED light flashes twice every 5 seconds
Connected standby
mode
The blue LED light flashes once every 10 seconds
Playing music
The blue LED light flashes once every 10 seconds
Talking
The blue LED light flashes once every 10 seconds
Delete paired record
Charging
The blue & red LED lights flash once at the same time
Solid red LED light
Full charge
The red LED light turns off
Low battery
The red LED light flashes
7
Charging
Please charge the RKING2000 at once when the red LED light flashes.
Charging time is approximately two hours, and once fully charged, the red
light will change to blue.
Charge Connections
Please connect to the RKING2000 charging port through the Micro USB
charging cable. The charger can be used as a car charger, travel charger,
computer USB, etc.
Note:
1. Charge the RKING2000 at least once every two months when
not in use.
2. When powered on during charging, it is normal for the charging
indicator to cover up the Bluetooth indicator.
8
Product Specifications
Bluetooth Version
V5.0
Bluetooth Chipset
CSR8615
Operation Range
Up to 32 feet
Bluetooth Protocols
HSP, HFP, AVRCP, A2DP
CODEC Code
SBC
Battery Capacity
400mAh/3.7V
Charging Time
2 hours
Stand by Time
400 hours
Working Time
About 24 hours (50% volume)
Headset Net Weight
.17 lbs
Headset Dimension
6.44" x 6.32" x 2.42"
Actual use time will differ depending on environment and music.
9
Notes and Q & A
A. How to reconnect and operate when connection fails?
When RKING2000 connects to your phone successfully the first time, it will
search and reconnect to the paired device automatically going forward. If it
fails to connect, repair the phone to reconnect.
B. How to delete paired records?
When powered on, press and hold the Volume + and - buttons for 5 seconds
to clear the pairing record. The blue and red indicator lights will flash once at
the same time indicating the record has been cleared. Try clearing the records
when experiencing a connection problem.
C. What is the password for pairing?
Some devices require a password for pairing. Please try 0000, 8888, 1111, or
1234.
D. What device can charge the headset?
Any car charger, power bank, computer, etc. that is DC 5V with a charging
current more than 500mA can be used to charge this headset.
E. What to do if the headset won't turn on or connect?
Try to reset the headset by plugging it into the charging cable and press and
hold the MFB. The headset needs to be turned off and back on for full reset.
F. Does it power off automatically?
The headset will power off automatically if it has not had a connection for 10
minutes or if the battery voltage is less than 3.1V.
G. How do I operate the three-way calling function?
When receiving an incoming call, while already on a call...
1. Short click the MFB to answer the new call and end the
current call.
2. Double-click the MFB to answer the new call and keep the current
call on hold.
3. Click and hold the MFB for two seconds to reject the incoming call.
When on a three-way call, double-click the MFB to switch audio
between the current call and the call on hold.
10
ONE-YEAR LIMITED WARRANTY For support, product and warranty information, please
visit www.roadprobrands.com
RoadKing® and RoadPro® are registered trademarks owned by DAS Brands, LLC and its
affiliated companies. The BLUETOOTH® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by DAS Companies, Inc. is
under license. All other trademarks, registered trademarks, copyrights and logos are the
property of their respective owners. ©2022 DAS Companies, Inc. and/or affiliates.
11