Black Box EME1A1-005 AlertWerks Voltage Sensor Owner's Manual
Add to my manuals2 Pages
Black Box EME1A1-005 Voltage Sensor: Monitor AC voltage presence, absence, and status with this user-friendly device. Ideal for data centers, server rooms, and other critical facilities, it seamlessly integrates with AlertWerks ServSensor Junior (EME102A) and ServSensor (EME108A).
advertisement
February 2010
MT1000A-85-R4
Voltage Sensors
BLACK BOX
is user-programmable with both the base and top voltage from 0 to 60 volts.
®
Specifications
Communications Cable — RJ-45 jack to sensor using UTP
CAT5 cable
Maximum Extension Cable Length — 1000 ft. (304.8-m)
with approved low-capacitance shielded cable or UTP
Measurement Indication — EME1A1-005: Alarm or Normal
Measurement Range — EME1A1-005: Detects voltage
at 50 to 250 VAC;
EME1D1-005: User-programmable from 0 to 250 VDC
Measurement Rate — Multiple readings every second
Sensor Type — Open/closed contact switch
Overview
The Voltage Sensors monitor the presence or absence of AC or
DC voltage. The AC model includes an Alarm/Normal indicator in the device firmware. Use up to two AC voltage sensors per
AlertWerks ™ ServSensor Junior (EME102A), and up to eight per
ServSensor (EME108A).
Connect up to eight voltage sensors to AlertWerks V4E
(EME134A) ServSensor Expansion Hub RJ-45 sensor ports.
The voltage sensors include an SNMP interface for alarm/ normal status. Set these using the Web interface and configure them to send alerts as SNMP traps, e-mail, and SMS (text message).
For features, turn this page over…
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [email protected]
Features
• Powered by the AlertWerks Hub (EME102A or EME108A). Needs no additional power.
• Use up to two AC voltage sensors per EME102A, and up to eight per EME108A.
• Detects the presence of two dry contact sensors.
• Connect up to eight voltage sensors to each EME134A or EME108A, or EME1X8 RJ-45 sensor ports.
• Includes an autosensing disconnect alarm.
© Copyright 2011. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box ® and the Double Diamond logo are registered trademarks, and AlertWerks is a trademark, of BB
Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.
EME1A1-005, version 1
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
BLACK BOX
®
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project