- Industrial & lab equipment
- Measuring, testing & control
- Distance meters
- Leica
- DISTO D210XT
- User manual
advertisement
User Manual
English
Congratulations on the purchase of your
Leica DISTO™ D210XT.
product for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them.
The safety instructions and the user manual should be read through carefully before you use the
Symbols used in this manual
The symbols used have the following meaning:
WARNING
Indicates a potentially hazardous situation or an unintended use which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor injury and/or in appreciable material, financial and environmental damage.
)
Important paragraphs which must be adhered to in practice, as they enable the product to be used in a technically correct and efficient manner.
Leica DISTO™ D210XT 776114
1
Intended Use
Permitted uses
• Measuring distances
• Computing functions, e.g. areas and volumes
Adverse uses
• Using the instrument without instructions
• Using outside the stated limits
• Deactivation of safety systems and removal of explanatory and hazard labels
• Opening of the equipment by using tools
(screwdrivers etc.)
• Carrying out modification or conversion of the product
• Use of accessories from other manufacturers without the express approval of Leica Geosystems.
• Deliberate or irresponsible behaviour on scaffolding, when using ladders, when measuring near machines which are running, or near parts of machines or installations which are unprotected
• Aiming directly into the sun
• Deliberate dazzling of third parties; even in the dark
• Inadequate safeguards at the surveying site
(e.g when measuring on roads, construction sites, etc.)
Symbols used in this manual
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
CZ
H
PL
EST
LT
GR
ROK
RUS
SK
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
Limits of use
)
Also see section "Technical data".
The Leica DISTO™ is designed for use in areas permanently habitable by humans, do not use the product in explosive hazardous areas or in aggressive environments.
Responsibilities
Responsibilities of the manufacturer of the original equipment Leica Geosystems AG, CH-9435
Heerbrugg (for short Leica Geosystems):
Leica Geosystems is responsible for supplying the product, including the User Manual and original accessories, in a completely safe condition.
(Additional language versions can be found at:
www.disto.com)
Responsibilities of the manufacturer of non-
Leica accessories:
The manufacturers of non-Leica accessories for the
Leica DISTO™ are responsible for developing, implementing and communicating safety concepts for their products. They are also responsible for the effectiveness of these safety concepts in combination with the Leica Geosystems equipment.
Responsibilities of the person in charge of the instrument:
WARNING
The person responsible for the instrument must ensure that the equipment is used in accord-
Intended Use
2
ance with the instructions. This person is also accountable for the deployment of personnel and for their training and for the safety of the equipment when in use.The person in charge of the product has the following duties:
• To understand the safety instructions on the product and the instructions in the user manual.
• To be familiar with local safety regulations relating to accident prevention.
• To inform Leica Geosystems immediately if the equipment becomes unsafe.
Leica DISTO™ D210XT 776114
Overview
Keyboard
1
6
8
2
4
1 ON/DIST (ON/MEASURING) - key
2 PLUS [+] - key
3 MINUS [-] - key
4 AREA/VOLUME - key
5 PYTHAGORAS - key
6 REFERENCE - key
7 HISTORICAL MEMORY/UNITS - key
8 CLEAR/OFF - key
Leica DISTO™ D210XT 776114
3
5
7
3
Display
1
2
16
15
3 4 5 6 7 8
9
10
11
14
13
1 Laser "ON"
2 Reference (front/rear/end piece/tripod)
3 min / max display
4 Battery status
5 Area/volume
6 Info symbol
7 Pythagoras
8 Historical memory
9 Intermediate line 3
10 Intermediate line 2
11 Intermediate line 1
12 Main line
13 Detailed display
14 Ceiling area
15 Wall area
16 Circumference
12
Overview
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
CZ
H
PL
EST
LT
GR
ROK
RUS
SK
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
Start up
Inserting / Replacing Batteries
1 Fold out the end-piece.
2 Open the locking mechanism with a coin or screwdriver and lift the battery compartment cover.
3 Insert batteries, observing correct polarity.
4 Close the battery compartment.
• Replace the batteries when the symbol flashes
) permanently in the display.
Only use alkaline batteries.
)
If the instrument will not be used for a long time, remove the batteries as a protection against corrosion.
)
To ensure the instrument remains watertight, you should avoid getting dirt on the battery compartment seals.
Start up
4
Operation
Measuring Conditions
Range
Range is limited to 70 m.
At night or dusk and if the target is in shadow the measuring range without target plate is increased.
Use a target plate to increase the measurement range during daylight, or if the target has poor reflection properties!
Target Surfaces
CAUTION:
Measuring errors can occur when measuring toward colourless liquids (e.g. water) or dust free glass, Styrofoam or similar semi-permeable surfaces.
Aiming at high gloss surfaces may deflect the laserbeam and lead to measurement errors.
Hazards of Use
CAUTION:
Watch out for erroneous distance measurements if the instrument is defective or if it has been dropped or has been misused or modified.
Precautions:
Carry out periodic test measurements.
Particularly after the instrument has been subject to
Leica DISTO™ D210XT 776114
abnormal use, and before, during and after important measurements.
Make sure the Leica DISTO™ optic is kept clean and that there is no mechanical damage to the bumpers.
CAUTION:
In using the instrument for distance measurements or for positioning moving objects (e.g. cranes, building equipment, platforms, etc.) unforeseen events may cause erroneous measurements.
Precautions:
Only use this product as a measuring sensor, not as a control device. Your system must be configured and operated in such a way, that in case of an erroneous measurement, malfunction of the device or power failure due to installed safety measures (e.g. safety limit switch), it is assured that no damage will occur.
Setting the unit
Press long until the desired unit is displayed.
1.
2.
3.
4.
5.
6.
Possible units:
Distance
0.000 m
0'0''
1
/
8
0 in
1
/
8
0'0''
1
/
16
0 in
1
/
16
0.00 ft
Area
0.000 m²
0.000 m²
0.000 m²
0.00 ft²
0.00 ft²
0.00 ft²
Volume
0.000 m³
0.000 m³
0.000 m³
0.0 ft³
0.0 ft³
0.0 ft³
Switching on/off
1x briefly: the instrument and the laser are switched on.
The display shows the battery symbol until the next button is pressed.
Pressing this button for longer switches the instrument off.
The instrument switches off automatically after three minutes of inactivity.
Leica DISTO™ D210XT 776114
5
CLEAR-Key
1x briefly: the last action is cancelled.
Operation
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
CZ
H
PL
EST
LT
GR
ROK
RUS
SK
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
Reference Setting
Default reference setting is from the rear of the instrument.
The instrument can be set for the following measurements:
• To measure from an edge, fold out the positioning bracket until it snaps in for the first time.
• To measure out of a corner, fold out the stop bracket until it snaps in, push the stop bracket with a little force to the right side; the stop bracket can now be completely unfolded.
)
The device automatically recognises the measurement position and adjusts the following measurement.
Operation
6
1x briefly: the next measurement is taken from the front edge. After one measurement, the reference returns automatically to the default setting (rear reference).
2x briefly: the measurement is taken from the rear reference (default setting).
1x long: The measurements are taken continuously from the front edge. A brief press on the key cancels the continuous measurement setting again.
Leica DISTO™ D210XT 776114
Measuring
Single Distance Measurement
1x briefly: the laser is activated.
1x briefly: a distance measurement is taken.
The result is displayed immediately.
Continuous measurement
Distances can be staked out with this function
1x long: a "beep" is sounded. A continuous measurement is started.
1x briefly: the continuous measurement is stopped.
The last measured value is displayed in the summary line.
Minimum-/Maximum-Measuring
This function enables determining the minimum or maximum distance from a specific measuring point, e.g. the determination of room diagonals (maximum value) or horizontal distance (minimum value).
Switching on continuous measurement (see above).
The corresponding maximum and minimum values are displayed.
Leica DISTO™ D210XT 776114
7
Functions
Addition / Subtraction
Distance Measurement.
1x briefly: the next measurement is added to the previous one.
1x briefly: the next measurement is subtracted from the previous one.
Repeat this procedure for as many times as required.
The result is displayed in the summary row, the previously measured value is displayed in intermediate line
2, the value to be added in intermediate line 1.
1x briefly: the last step is cancelled.
Area function
1x briefly: The symbol is displayed.
1x briefly: takes first distance measurement
(e.g. length)
1x briefly: takes second distance measurement
(e.g. width)
The result of the area measurement is displayed in the summary row, the individually measured values are displayed in intermediate lines 1 and 2.
A long press on the
.
key displays the perimeter
Measuring
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
CZ
H
PL
EST
LT
GR
ROK
RUS
SK
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
Adding and subtracting areas
Calling up the area function and measuring areas.
1x briefly: takes first distance measurement
(e.g. length)
1x briefly: takes second distance measurement
(e.g. width)
The result of the second area measurement, "+" flashes.
1x briefly: confirms the addition; the added area results are displayed in the summary row.
Volume function
2x briefly: the symbol is displayed.
1x briefly: takes first distance measurement
(e.g. length)
1x briefly: takes second distance measurement
(e.g. width)
The result of the area measurement from the values already measured is displayed in the summary row.
1x briefly: takes the third distance measurement (e.g. height). The value is displayed in intermediate line 1.
The calculated volume appears in the summary line, the last three measured values appear in intermediate lines 1, 2, 3.
Press the button for longer to display additional
Functions
8
room information such as circumference ceiling/floor area
,
, surface area of the walls
Indirect Measurement
The instrument can measure distances with the
Pythagoras method. This procedure facilitates in measuring distances that are difficult to access.
)
Adhere to the prescribed sequence of measurements:
• All target points must be vertical or horizontal on the surface of the wall.
• The best results are achieved when the intrument is rotated around a fixed point (e.g. the stop bracket is fully extended and the instrument is placed against a wall).
• To take the measurement, the minimum/ maximum function can be called up. The minimum value is used for measurements that must be at right-angles to the target; the maximum distance is used for all other measurements.
)
Make sure that the first measurement and the distance to be measured are at right angles. Use the minimum/maximum function.
.
Leica DISTO™ D210XT 776114
Indirect measurement - determining a distance using 2 auxilliary measurements
Indirect measurement - determining a distance using 3 auxilliary measurements
1
2
3
1x briefly: the symbol is displayed.
The distance to be measured flashes in the symbol.
1x briefly: takes a measurement of the distance
The second distance to be measured flashes in the symbol
1x briefly: takes a measurement of the horizontal distance
The result of the function is displayed in the summary row.
If the button is pressed for along time while measuring a distance, maximum or minimum continuous measuring is activated.
Leica DISTO™ D210XT 776114
9
2x briefly: the symbol is displayed.
The distance to be measured flashes in the symbol.
1x briefly: takes a distance measuement
The second distance to be measured flashes in the symbol
1x briefly: takes a horizontal measurement.
The third distance to be measured flashes in the symbol
1x briefly: takes a measurement of the distance
The result of the function is displayed in the summary row.
If the button is pressed for along time while measuring a distance, maximum or minimum continuous measuring is activated.
Functions
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
CZ
H
PL
EST
LT
GR
ROK
RUS
SK
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
Historical memory
1x briefly: the symbol and the last measured value are displayed.
Use the "+" or "-" buttons to navigate through the last 10 values. A long key press allows the values to be used in other functions.
Switching off the beep
Press and hold simultaneously for 3 seconds:
The beep is switched off.
To reactivate it, press and hold for 3 seconds.
Appendix
10
Appendix
Display Notices
All display notices are either displayed with
"Error". The following errors can be corrected.
or
Cause
204
Calculation error
252
Temperature too high
253
Temperature too low
255
Received signal too weak, time for a measurement too long.
256
Received signal too strong
257
Faulty measurement, too much background light
258
Outside of the range of measurement
Correction
Repeat procedure
Let device cool down.
Warm device up
Use a target plate
Use target plate (gray side)
Use target plate (brown side)
Select measurement distance within the range of measurement
Error Cause
Error Hardware error
Correction
Should this message remain active after switching the instrument off and on several times, please contact your dealer.
Leica DISTO™ D210XT 776114
Technical Specifications
Range
Measuring accuracy (2 σ)
Smallest unit displayed
Laser class
Laser type
Protection against splashes and dust
Autom. power off:
Laser
Instrument
Illumination
Fold out endpiece
Battery life,
Type 2 x AAA
Dimension
0.16 to 230 ft* typically ± 0.06 in**
1
/
16
in
2
635 nm, < 1 mW
IP 65 after 60 s after 180 s
9
9 up to
5 000 measurements
123 x 55 x 28 mm
4.8 x 2.7 x 1.1 in
159 g / 5.57 oz Weight
Temperature range:
Storage
Operation
-25°C to +70°C
(-13°F to +158°F)
0°C to +40°C
(32°F to +104°F)
* Use a target plate to increase the measurement range during daylight or if the target has poor reflection properties!
** in favourable conditions (good target surface properties, room temperature) up to 10 m. In unfavourable conditions, such as intense sunshine, poorly reflecting target surface or high temperature variations, the deviation over distances above 10 m can increase by ± 0.15 mm/m.
Leica DISTO™ D210XT 776114
11
Electromagnetic Compatibility (EMC)
The term "electromagnetic compatibility" is taken to mean the capability of the product to function smoothly in an environment where electromagnetic radiation and electrostatic discharges are present, and without causing electromagnetic interference to other equipment.
WARNING
The Leica DISTO™ conforms to the most stringent requirements of the relevant standards and regulations.
Yet, the possibility of the product causing interference in other equipment cannot be fully excluded.
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Appendix
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help
WARNING:
Changes or modifications not expressly approved by Leica Geosystems for compliance could void the user’s authority to operate the equipment.
Laser classification
The Leica DISTO™ produces a visible laser beam which emerges from the front of the instrument.
Class 2 Laser Products:
Do not stare into the beam or direct it unnecessarily at other persons. Eye protection is normally afforded by aversion responses including the blink reflex.
WARNING
Looking directly into the laser beam with optical aids (e.g. binoculars, telescopes) can be hazardous.
Precautions:
Do not look directly into the beam with optical aids.
CAUTION:
Looking into the laser beam may be hazardous to the eyes.
Precautions:
Do not stare into beam. Do not look into the laser beam. Make sure the laser is aimed above or below eye level (particularly with fixed installations, in machines, etc.).
The product is a Class 2 Laser Product in accordance with:
• IEC60825-1 : 2007 "Radiation safety of laser products"
Labelling
Laser Radiation
Do not stare into the beam
Laser class 2 acc. IEC 60825-1:2007
Maximum radiant power *: <1mW
Emitted wavelength: 620-690nm
Beam divergence 0.16 x 0.6 mrad
Impulse duration 1 x 10
-9
s
Position of the type label:
Leica DISTO™ D210XT 776114
2
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
Leica DISTO™ D210XT
www.leica-geosystems.com
Power: 3V 0.3A
Made in Hungary
13
Care
Wipe off dirt with a damp, soft cloth. Do not use aggressive cleaning agents or solutions.
Warranty
The Leica DISTO™ D210XT comes with a three* year warranty from Leica Geosystems.
More detailed information can be found at:
www.disto.com
* To receive the three year warranty, the product must be registered on our website www.disto.com within eight weeks of the purchase date. If the product is not registered, a two year warranty applies.
Disposal
CAUTION:
Flat batteries must not be disposed of with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations.
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national regulations in force in your country.
Adhere to the national and country specific regulations.
Product specific treatment and waste management information can be downloaded from the Leica
Geosystems home page at
Appendix
FIN
DK
SLO
TR
EN
D
N
S
GR
ROK
RUS
SK
CZ
H
PL
EST
LT
LV
BG
RO
CZ
H
PL
EST
LT
GR
ROK
RUS
SK
LV
BG
RO
FIN
DK
SLO
TR
EN
D
N
S
http://www.leica-geosystems.com/treatment or received from your Leica Geosystems dealer.
All right reserved for changes (drawings, descriptions and technical specifications).
Appendix
14
Leica DISTO™ D210XT 776114
Leica Geosystems AG
CH-9435 Heerbrugg
(Switzerland) www.disto.com
Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality
Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001).
Total Quality Management - Our commitment to total customer satisfaction. Ask your local
Leica Geosystems agent for more information about our TQM program.
Copyright Leica Geosystems AG, Heerbrugg,
Switzerland 2010
Translation of original text (776114 en)
Pat. No.: WO 9427164, WO 9818019, WO 0244754, WO 0216964,
US 5949531, EP 1195617, US 7030969, WO 03104748
advertisement