One
GB
User manual
Basic Operation ATAG One thermostat
Left arrow key:
- Lowering the value
- Scrolling upwards
Centre key (blue):
- Confirming a question or selection
Right arrow key:
- Increasing a value
- Scrolling down
TIP: If the display is dark or dim, it can be activated by touching one of the keys.
Default readout screen
Indication boiler in operation
Current room temperature
Set (or required) temperature
Selected function (in this case, according to schedule)
Outside temperature (online or from outdoor sensor)
Weather icon (only online)
Welcome to ATAG One, your thermostat.
Keep the Network security key or Wi-Fi code handy.
Do not give the code to third parties.
You must have your smart phone or tablet connected to your wireless network.
Watch the instructions video on Youtube.
CONFIGURE
Would you like to connect your One app now?
Yes No
Remember me
E-mail address
Password
Reset
One-app on your smart phone and/or tablet. Go to the Playstore/Appstore and search for: atag one.
At first start:
Select your language and follow the steps until CON-
FIGURE and choose: YES*.
(When One is already connected: Go to SETTINGS and select RECONFIGURE: YES).
(From SW/R43: Go to SETTINGS/CONFIGURATION/WIFI-
RECONFIGURATION)
*When choosing NO follow the steps for adjusting time and date. The One will not be connected to the Wi-Fi network and will function offline as a room controller.
Login
Register user
Wi-Fi configuration
Skip login
GB
4. Go to SETTINGS/Wi-Fi of your smart phone or tablet.
Select One xxxxxxxx and wait until the blue check mark is shown.
CONTINUE
5. Return to the One-app.
Press One-app and One thermostat.
COMPLETED
Setup is completed
CONTINUE
Remember me
E-mail address
Password
Reset
Login
Register user
Wi-Fi configuration
Skip login
The setup is now COMPLETED!
To use all features and services an account has to be created.
6. Create from the login screen from One app an account: Press REGISTER USER
Take care your smart phone or tablet is connected to the same wireless network as your One. Check this at
SETTINGS/Wi-Fi of your smart phone or tablet.
7. Follow all steps on One-app.
8. Open your e-mail (check your spam box, if necessary) and press the activation text.
9. Log in with your email address and the password you created previously
Press LOGIN
Press SEARCH
Select your One XXXXX
Press CONNECT
Check for a successful connection: Compare the displayed time of the One thermostat with the time on your smart phone or tablet. This must be equal.
You can now also use your account to login at: portal.atag-one.com
Watch the instructions video on Youtube:
atagheating.co.uk
GB