Atag ONE User manual

Atag ONE is a smart thermostat that gives you full control over your home's heating and cooling system. With its intuitive interface and a range of advanced features, Atag ONE makes it easy to create a comfortable and energy-efficient home environment. Whether you're looking to save money on your energy bills or simply want to make your home more comfortable, Atag ONE is the perfect solution.

PDF

Document

One

User manual

Basic Operation ATAG One thermostat

Left arrow key:

- Lowering the value

- Scrolling upwards

Centre key (blue):

- Confirming a question or selection

Right arrow key:

- Increasing a value

- Scrolling down

TIP: If the display is dark or dim, it can be activated by touching one of the keys.

Default readout screen

Indication boiler in operation

Current room temperature

Set (or required) temperature

Selected function (in this case, according to schedule)

Outside temperature (online or from outdoor sensor)

Weather icon (only online)

Welcome to ATAG One, your thermostat.

Keep the Network security key or Wi-Fi code handy.

Do not give the code to third parties.

You must have your smart phone or tablet connected to your wireless network.

Watch the instructions video on Youtube.

CONFIGURE

Would you like to connect your One app now?

Yes No

Remember me

E-mail address

Password

Reset

One-app on your smart phone and/or tablet. Go to the Playstore/Appstore and search for: atag one.

At first start:

Select your language and follow the steps until CON-

FIGURE and choose: YES*.

(When One is already connected: Go to SETTINGS and select RECONFIGURE: YES).

(From SW/R43: Go to SETTINGS/CONFIGURATION/WIFI-

RECONFIGURATION)

*When choosing NO follow the steps for adjusting time and date. The One will not be connected to the Wi-Fi network and will function offline as a room controller.

Wi-Fi configuration

Skip login

4. Go to SETTINGS/Wi-Fi of your smart phone or tablet.

Select One xxxxxxxx and wait until the blue check mark is shown.

CONTINUE

5. Return to the One-app.

Press One-app and One thermostat.

COMPLETED

Setup is completed

CONTINUE

Remember me

E-mail address

Password

Reset

Wi-Fi configuration

Skip login

The setup is now COMPLETED!

To use all features and services an account has to be created.

6. Create from the login screen from One app an account: Press REGISTER USER

Take care your smart phone or tablet is connected to the same wireless network as your One. Check this at

SETTINGS/Wi-Fi of your smart phone or tablet.

7. Follow all steps on One-app.

8. Open your e-mail (check your spam box, if necessary) and press the activation text.

9. Log in with your email address and the password you created previously

Press LOGIN

Press SEARCH

Select your One XXXXX

Press CONNECT

Check for a successful connection: Compare the displayed time of the One thermostat with the time on your smart phone or tablet. This must be equal.

You can now also use your account to login at: portal.atag-one.com

Watch the instructions video on Youtube:

atagheating.co.uk

Hello! I am an AI chatbot specifically trained to assist you with the Atag ONE User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts