ViziT VIZIT-M428C Operating

VIZIT-M428C
OPERATING INSTRUCTION
VIZIT-M428C - is a colour PAL monitor intended for use as a subscriber device within VIZIT video doorphones.
11
4
1
5
6
2
7
3
8
9
10
12
1.
2.
Handset.
Ring volume switch (left position for a quiet call, right position for a loud call). The switch position also
influences intercom volume.
3.
Lock release button.
4.
Button to switch the sleep mode on / off, enable video monitoring and switch to an additional video camera
(when the Monitor is connected through the commutator BKM).
5.
Power LED:
- green light - the Monitor is on stand-by;
- green flashing light - a parallel call from a Door Bell button or another doorstation (when the Monitor is
connected through the commutator BKM);
- orange light - the adjustment mode is on to adjust image brightness and saturation;
- green to orange flashing light - settings increased or decreased in the adjustment mode;
- red light - a call to the Concierge is in progress.
6.
Button to select image brightness adjustment, and increase the selected setting.
7.
Button to select image saturation adjustment, and decrease the selected setting.
8.
Function button with normally open contacts 12V / 50mA max. The button is connected to the Monitor’s K1
and K2 terminals, and can be used to control a peripheral executive device, such as an outdoor light timer.
9. Lock release button has the same function as the one on the handset, and can be used to release the
entrance door lock without picking up the handset.
10. Screen - 2.7” colour TFT LCD.
11. Fixing lugs.
12. Niche to hide connecting wires.
PARTS LIST
Fasteners
x1
x1
x2
Screw- 3.5х25
Monitor
VIZIT-M428C
x2
Anchor 6х30
Operating instruction
SAFETY INSTRUCTIONS
CAUTION! The Monitor does not contain voltage above 27V.
Do not perform any connections or repair when the power supply unit is on. Take care not to spill any liquids or chemically
active substances on the product. Unplug the power supply unit before cleaning the monitor. Clean by wiping with dry soft
cloth. Do not use any liquid cleaners, aerosol cleaners or abrasive agents.
Do not attempt to service the product by yourself. Please refer all services to qualified service personnel.
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
1/11
EXAMPLES OF CONFIGURATION WITHIN VIDEO DOORPHONE
The Monitor with an individual power supply unit and a Door Bell button near the apartment door,
as part of multi-apartment video doorphone
Apartment
Door Bell
button
2
Monitor
4
2
Intercom and video
line from multiapartment video
doorphone
Power supply unit
The Monitor fed from a group power supply unit with a Door Bell button,
as part of multi-apartment video doorphone
Apartment
Door Bell
button
2
Monitor
6
Intercom and video
line, power supply
line from multiapartment video
doorphone
The Monitor as part of multi-apartment video doorphone,
with an individual doorstation near the apartment door
Doorstation
Commutator
BKM-441
Apartment
Monitor
5
6
4
Intercom and video
line from multiapartment video
doorphone
2
Power supply unit
The Monitor as part of multi-apartment doorphone, with an individual doorstation at the storey entrance
and a Door Bell button near the apartment door
Doorstation
To other
Commutator
apartments
Apartment
BKM-441
on the storey
2
4
Monitor
2
Door Bell
6
Power supply
button
4
unit
Intercom and video
2
line from multiapartment video
doorphone
Power supply unit
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
2/11
The Monitor as part of multi-apartment doorphone, with a doorstation and outdoor camera on the storey,
and a Door Bell button near the apartment door
Outdoor camera
Door Bell
button
Doorstation
Apartment
3
8
Monitor
2
8
Intercom and video
line from multiapartment video
doorphone
Commutator
BKM-444
(on the storey,
up to 4 apartments)
6
To other
apartments
on the storey
Two Monitors with two individual doorstations
Apartment
Doorstation
Monitor
5
Commutator
BKM-440
6
Monitor
Doorstation
5
5
Two Monitors with two individual doorstations and an extra outdoor camera
Apartment
Doorstation
Monitor
5
Commutator
BKM-440М
6
Monitor
Doorstation
5
6
Outdoor camera
3
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
3/11
FEATURES
v
The Monitor as part of mutli-apartment doorphone (without the commutator BKM)
- Calls from the doorstation and door zone video monitoring
- Duplex intercom
- Remote door unlocking
- Activation of the doorstation camera from the Monitor (for video monitoring)
- Calls from a Door Bell button
- Image brightness and saturation adjustment
- Image contrast automatic adjustment
- LED indication of operating modes
- Two ring volume levels
v Additional features when the Monitor is connected through the commutator BKM
- Activation of an individual / storey doorstation(s) from the Monitor (duplex intercom and video monitoring)
- Activation of an outdoor camera from the Monitor (for video monitoring)
- Individual ring tone for each doorstation and Door Bell button
- Individual settings for image brightness and saturation for each camera (video doorstation, outdoor camera)
connected to the commutator
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
4/11
INSTALLATION
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM.
The list of companies is given on VIZIT.EU (http://vizit.eu/eurounion/).
1
3
1
2
12
- Unfasten the fixing screw (1) off the left cover (2).
- Take off the cover.
2
- Connect the wires to the terminals (12)
and arrange them properly inside the niche.
4
3
90
8
4
9
5
11
10
7
6
3
- Choose the place for the Monitor.
Recommended altitude is 150 cm above the floor.
- Put the left cover back on its place and fasten it with
the screw.
- Drill 2 holes (3) 6 mm in diameter and
30 mm deep in the wall.
5
- Drive anchors (4) into the holes.
- Lead connecting wires (5) in the niche (6).
To lead the wires in the niche, let them through a hole
in the wall, or use cable grooves (7), (8), (9). If use
cable grooves (8) and (9), remove a piece of plastic.
- Fasten the screw (10), as shown in the picture.
- Hang the Monitor on the screw (10).
- Fix the monitor fastening the screw (11).
Note.
Screws and anchors are supplied with the Monitor.
- Hang up the handset.
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
5/11
CONNECTIONS
The Monitor terminals and their destinations are given in the below table:
Destination
Terminal
LN +
LN+
LNGND
VI1
+E
DATA
K1
K2
LN -
Intercom line between Monitor and commutator /
doorstation
GND
Ground
VI
Video in
+E
Supply voltage for Monitor
DATA
Data exchange between Monitor and commutator BKM.
Connection of Door Bell button.
K1
K2
Normally open contact (12 V / 50 mA max.)
to control peripheral executive device
Connect the Monitor to other video doorphone units following the examples given in the section EXAMPLES OF
WIRING DIAGRAMS.
Acceptable cross-sections of wires to connect the Monitor to other units of your video doorphone are given in the
doorstation / control unit operating instruction.
Acceptable cross-sections of wires to connect the Monitor to the commutator BKM are given in the commutator BKM
operating instruction.
Note. Where the Monitor operates together with the commutator BKM, a Door Bell button connection directly to the
Monitor’s terminals is not available. For details, refer to the commutator BKM operating instruction.
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
6/11
EXAMPLES OF WIRING DIAGRAMS
Monitor VIZIT-М428С as part of multi-apartment video doorphone
To next
commutators
BK-4AV
To next
commutators
BK-4AV
6
5
+E
G
Commutator
BК-4AV
Z
1 2 3 4
In-line DC jack supplied
with power supply unit
Protective earthing
conductor
FD=FC+
VOC
G
FC
LN
VOB
G
FB
LN
VOA
G
FA
LN
Video from
doorstation
FC=FB+
FB=FA+
4
3
2
1
LINE
GND
Ek
SEL
VOD
G
FD
LN
VO
VG
VG
VI
To doorstation / control unit
(see wiring diagrams given in
operating instructions on control
units or doorstations of multiapartment doorphones / video
doorphones VIZIT)
DC 18V
Power Supply Unit
19w/14.4v/EU(18V/1.0A)
LN+
LNGND
VI
+E
DATA
K1
K2
Monitor
VIZIT-M428C
2
1
1
2
4
3
2
1
Door Bell
button
2
1
2
F
1
Example of use of the function button with Monitor VIZIT-М428С
LN+
LNGND
VI
+E
DATA
K1
K2
To commutator / power supply unit
Relay
12V, 50 mA max.
Monitor
VIZIT-M428C
F
To the executive device
+
-
Power Supply
Unit 12V
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
7/11
Monitor VIZIT-М428С with Commutator BKM-441, Doorstation BVD-403СРL (storey),
and multi-apartment (main entrance) video doorphoone
6
5
4
3
2
1
LN+
LNGND
VI
+E
DATA
K1
K2
Monitor
VIZIT-M428C
F
Power Supply Unit
19w/14.4v/EU(18V/1.0A)
18V, 1А
DC IN
GND
Commutator
BKM-441
1 2 3 4
1
To next
commutators
BK-4AV
+DL
GND
DBB
2 3 4 5
FC=FB+
LINE
GND
Ek
SEL
FD=FC+
VOD
G
FD
LN
FB=FA+
VOC
G
FC
LN
VOA
G
FA
LN
Z
Commutator
BК-4AV
VOB
G
FB
LN
VO
VG
VG
VI
6
5
4
3
2
1
Protective earthing conductor
To next
commutators
BK-4AV
+E
G
Video from
doorstation
+E
LN2+
LN2GND
+E
VI2
Ec2
DATA
+E
VO
GND
LNLN+
L N1 +
LN1GND
VI1
1
2
3
4
5
6
Doorstation
BVD-403CPL
1 2 3 4
To doorstation / control unit
(see wiring diagrams given in
operating instructions on control
units or doorstations of multiapartment doorphones / video
doorphones VIZIT)
1
2
3
4
5
50 V
1A
LINE
GND
+E
VO
Ec
LC
ELECTROMECHANICAL STRIKE
OR ELECTROMECHANICAL LOCK
(12V, 1А MAX. )
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
8/11
Monitor VIZIT-М428С with Commutator BKM-441, Doorstation BVD-405СР-2 (storey),
Door Bell button and multi-apartment (main entrance) video doorphoone
6
5
4
3
2
1
Apartment No 1
Monitor
VIZIT-M428C
LN+
LNGND
VI
+E
DATA
K1
K2
F
Power Supply Unit
19w/14.4v/EU(18V/1.0A)
18V, 1А
DC IN
GND
1
2
3
4
5
6
DATA
+E
VO
GND
LNLN+
+E
L N1 +
LN1GND
VI1
LN2+
LN2GND
+E
VI2
Ec2
Commutator
BKM-441
1 2 3 4
1 2
2
To next
commutators
BK-4AV
Door Bell
button
1
To next
commutators
BK-4AV
FC=FB+
4
3
2
1
LINE
GND
Ek
SEL
FD=FC+
VOD
G
FD
LN
FB=FA+
VOC
G
FC
LN
VOA
G
FA
LN
Z
Commutator
BК-4AV
VOB
G
FB
LN
VO
VG
VG
VI
-18
+18
V1
VG
V2
+18
-18
-18
+18
V3
VG
V4
+18
-18
1
2
Protective earthing conductor
6
5
+E
G
Video from
doorstation
+DL
GND
DBB
2
1
2
1
Distribution
Amplifier
RVS-4
82 Ohms
VO
VG
VI
VG
1 2
4 3 2 1
To doorstation / control unit
(see wiring diagrams given in
operating instructions on control
units or doorstations of multiapartment doorphones / video
doorphones VIZIT)
To the next
apartment
1
Power Supply Unit
BPD18/12-1-1
+18
-18
-12
+12
2
1
2
2
1
2
1
1
2
2 1
Doorstation
BVD-405CP-2
FD
FC
LINE
LC
GND
+E
FB
FA
VO
50 V
1A
ELECTROMECHANICAL STRIKE
OR ELECTROMECHANICAL LOCK
(12V, 1А MAX. )
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
9/11
SETUP
Before turning the power on, make sure that there is no misconnection or risk of short circuit.
Turn on the power supply unit or commutator BKM.
The monitor LED is illuminating with green light. If the LED remains dim, the Monitor is in the sleep mode (calls are ignored,
and all buttons except for
are disabled). To switch the Monitor on, press briefly the
button.
Set up image brightness and saturation
To select and adjust image settings use buttons / + (brightness) and / - (saturation).
Press
. Image from the doorstation camera is appearing on the screen, and the LED is illuminating with green light.
Adjusting image brightness
/ +, or / - . The LED is flashing with orange to
- Press the
/ + button. The LED is illuminating with orange light. Press
green light. When the lowest or the highest degree of brightness is reached, the LED flashing stops.
- The Monitor quits the setup mode automatically, if no button is pressed within 5 seconds. The LED starts illuminating with
green light.
Adjusting image saturation
/ +, or / - . The LED is flashing with orange to
- Press the
/ - button. The LED is illuminating with orange light. Press
green light. When the lowest or the highest degree of saturation is reached, the LED flashing stops.
- The Monitor quits the setup mode automatically, if no button is pressed within 5 seconds. The LED starts illuminating with
green light.
Note. When the Monitor is connected through the Commutator BKM, you can set up image brightness and saturation
individually for each camera connected to the commutator (doorstation cameras, an outdoor camera). For individual
settings, select a connected camera by pressing the
button, and follow the above setting procedures.
Changing ring volume
- Pick up the handset.
- Shift the ring volume switch either to the left (for a quiet ring sound), or to the right (for a loud ring sound).
Note. The position of the ring volume switch also influences intercom volume. Remember to shift the ring volume
switch to the right (loud) before starting intercom.
FUNCTIONAL CHECK AND OPERATION ORDER
Calls from doorstation
When a call is made from the doorstation, the Monitor is ringing. Image from the doorstation camera is displayed on the
screen. Pick up the handset and check duplex intercom.
To release the door lock, push the lock release button either on the handset, or on the Monitor. After you release the button,
intercom is still available. Hang up the handset. The screen will shut off, and the monitor will go to stand-by.
Note. You can unlock the door without picking up the handset. When called, just press the lock release button on the
Monitor. After you release the button, the Monitor will go to stand-by.
Calls from door bell button
When the door bell button is pressed, the Monitor is ringing and the screen switches on.
Calls to Concierge
- Push
, image from the doorstation camera is displayed on the screen.
- Pick up the handset.
- Press and hold the lock release button on the handset, until the Monitor LED illuminates with red light. Red LED indicates
that the call to the Concierge has started (for details on “Subscriber - Concierge” intercom, please refer to the Concierge
Console operating instruction).
Operation with commutator BKM
Full information on operation with commutators BKM is given in operating instructions on corresponding commutators.
Operation of the Monitor VIZIT-M427C is similar to other monitors specified in BKM operating instructions.
Notes.
to select the channel with image from the corresponding doorstation.
1. To activate the individual doorstation, push
Check up the image from the individual doorstation, then pick up the handset and press and hold the lock release button on
the handset, until the Monitor LED illuminates with red light. Release the button. The doorstation is active now, meaning
duplex intercom with the doorstation is engaged on your initiative.
2. To call the Concierge when the Monitor is connected through commutators BKM-440, -440M, -441: push
to select a
corresponding channel. Pick up the handset and press and hold the lock release button on the handset, until the Monitor
LED illuminates with red light. Release the button.
www.vizit-group.com
VIZIT-M428С Operating Instruction (revision 2016-07)
10/11
3.To call the Concierge when the Monitor is connected through the commutator BKM-444: pick up the handset when the
Monitor is on stand-by. Press and hold the lock release button on the handset, until the Monitor LED illuminates with red
light. Release the button.
To engage the sleep mode, press and hold
until the Monitor LED is off.
SPECIFICATIONS
Screen:
Type
Diagonal
Resolution
TFT LCD
2.7" (68 mm)
320 х (RGB) x 240
PAL
Colour system
Video input:
- impedance
- voltage
Operating voltage
Power consumption
Dimensions (W)x(H)x(D)
Weight
Colour:
470 Ohms
1…1.8 V p-p
15…27 VDC
1.2 W max
145 x 175 x 40 mm
0.26 kg
silver/dark grey
OPERATING CONDITIONS
The Monitor is intended for indoor use only.
Ambient temperature range:
Relative humidity of air:
www.vizit-group.com
+ 5°C to + 40°C
up to 93% at 25°C
VIZIT-M428С Operating Instruction (revision 2016-07)
11/11