Pantone PT-BS006Y Instructions

DIGITAL CLOCK WITH BLUETOOTH SPEAKER
MODELS: PT-BS006Y, PT-BS006N, PT-BS006P, PT-BS006L
PRODUCT OVERVIEW
1 2 3 4 5 6
Top View
1.
2.
3.
4.
5.
6.
•
•
7
8.
9.
10.
11.
12.
13.
14.
15.
16.
7
8
9
10 11
12
13
Front View
(alarm 1) : press to turn alarm 1 on.
Press again to turn the alarm off. Press
and hold to set the clock/alarm.
14
(alarm 2) : press to turn alarm 2 on.
15
Press again to turn the alarm off. Press
and hold to set the clock/alarm.
16
(MODE) button : press to switch
between different input modes.
Side View
: press to play the previous song.
: press to play the next song.
: press to play/pause song.
Press and hold to turn the product on. Press and hold again to turn the product off.
Press the button twice to turn the LED knob light on/off.
LED display
(Alarm 1) : lights up when 1st alarm is set.
(Alarm 2) : lights up when 2nd alarm is set.
BT indicator: lights up when connected to a Bluetooth device.
TF (Micro SD) indicator : lights up when a Micro SD card is
inserted into the TF card port.
Volume control knob : rotate the knob clockwise to increase
volume. Rotate the knob anticlockwise to decrease volume.
TF Card/Micro SD card slot: insert your Micro SD card to play
the songs stored in your Micro SD card.
Charging LED indicator
USB-C port: use the supplied USB-C charging cable to charge the product.
OPERATION
Power on and charging
Before first time use, charge the product using the supplied USB-C charging
cable. Plug the cable into the USB-C port on the product and the other end to
a power source. Charge for 2 hours.
Press and hold the
button to turn the product on or off.
Setting the time
Press and hold the
button to enter clock settings, the hours number will
flash on the LED display. Use the / buttons to set the hour.
Press the button again and the minutes number will flash on the LED
display. Use the
/ buttons to set the minutes.
Press and hold the button to finish setting the time.
To reset time settings, first delete the alarm settings.
Alarm settings
Press the button to enter 1st alarm. Press and hold the button again and the
hour number on the LED display will flash. Use the
/
buttons to set the hour.
Press the button again and the minutes number on the LED display will flash.
Use the
/
buttons to set the minutes. The Alarm light will light up indicating
alarm is on.
Press the button again to enter the ringtone selection. There are 5 ringtones to
choose from. Use the
/
buttons to select the desired ringtone.
Press and hold the
button to save the settings of the 1st alarm.
For the 2nd alarm, repeat the steps above using the
button.
When an alarm rings, press any button to stop/end the alarm.
To turn off an alarm, when on alarm mode, press the
buttons.
Mode switch
Press the button to switch between input modes.
Press and hold the button to switch between 12 hour and 24 hour mode.
Adjusting brightness on LED display
Press the button to switch to light mode.
Use the
/
buttons to adjust the brightness on the LED display.
Bluetooth Mode
When the product is turned on, press the button to switch to Bluetooth mode.
You will hear a voice prompt “Bluetooth Mode”, the BT indicator will also flash.
On your Bluetooth device, look for PT-BS006 in the list of detected devices, and
pair with it. Once successfully paired, a notification sound will go off and the BT
indicator will light up.
The product and your Bluetooth device will remember each other and
automatically connect when they are both turned on.
Press the
button to play/pause the song. You can also control via your
Bluetooth device.
Rotate the volume control knob to decrease/increase volume level. You
can also control via your Bluetooth device.
Press the / buttons to play the previous/next song. You can also
control via your Bluetooth device.
TF Card/Micro SD card mode
Insert a TF card/Micro SD card into the TF (Micro SD) card slot on the product.
The product will automatically enter media playback.
Press the
button to play/pause the song.
Rotate the volume control knob to decrease/increase volume level.
Press the / buttons to play the previous/next song.
Specifications
Battery capacity
1200mAh
Output power
3W
Charging time
2 hours
Play time
6-8 hours
Bluetooth operation range
<10m
Weight
260 g (approx.)
Dimensions (mm)
148(W) x 61(H) x 55(D)
Compliance and Responsible Disposal
This product complies with the Australian Safety Standard AS/NZS 62368.1
to ensure the safety of the product.
For Technical and Warranty Support
1300 886 649
tempo.org
tempo.org/support
Distributed by Tempo (Aust) Pty Ltd,
PO Box 132, Frenchs Forest NSW 1640