TCNEWCL HM-ET07 HDMI 4X1 Quad Multi-Viewer Installation Guide

INTRODUCTION:
HDMI 4X1 QUAD MULTI-VIEWER
WITH SEAMLESS SWITCHER
This HDMI 4X1 Switch is a high performance 4 by 1 Quad Multi-Viewer
with seamless switcher. It supports four HDMI input sources to be
displayed on one screen with five multiview mode. As a switcher, it can
also seamlessly switch the four HDMI input freely.
The product can be controlled by various ways, through the front panel
button, IR, RS232 control etc.
FEATURES:
● Compliant with HDMI 1.3a, HDCP 1.2
● Supports multiplexed HDMI 4-input and 1-output
● Supports up to 1080p60 High Definition resolution
● Support 4 by 1 Quad Multi-viewer and seamless switch(with same
resolution)
● Support button, IR control, RS232 control
● Support scaler up, scaler down function
● Support multi output resolution
Quick Installation Guide
Ver. 1.0
APPLICATION:
● Video Switcher
● Surveillance for multi camera
● Car quad monitor
● Video format converter
● Multimedia panel
All brand names and trademarks are properties of
their respective owners
PACKAGE CONTENTS:
● 1× Main unit
● 1× 12V/DC, 2A Power Supply
● 1× User Manual
● 1× Remote control
1
CONNECTION AND OPERATION:
PRODUCT OVERVIEW:
Front Panel:
12V/DC, 2 A
HDMI Output
RS232
Audio
③
④
⑤ ⑥ ⑦
① ②
2
Mode
IR
1: 12V/DC: Plug the 12V DC power supply into the unit and connect the adaptor
to AC wall outlet.
2: POWER LED: This blue LED illuminates when the device is connected with
power supply.
3: HDMI OUTPUT: The HDMI is where you connect the HDTV or monitor with
HDMIcable for input source display.
4: RS232: Connect the RS232 port to the PC or notebook by RS232 Cable.
5: Audio BUTTON: Press this button to select the audio from the input sources.
6: MODE BUTTON: Press this button to select the multi-view display mode.
7: IR :Remote control receiver window.
1. Connect the signal sources such as Blu-Ray Player, Play Station 3,
audio/video receiver, satellite receivers and computers equipped with HDMI
output interfaces with a short high-speed HDMI cable to the HDMI Switcher
inputs.
2. Connect the HDMI output of the HDMI Switcher to a high-definition display
device such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces
with a HDMI cable to HDMI Switcher output.
3. The Switcher is powered by an external power supply which is included.
Connect power first to the source, then to the Switcher and then to HD TV or
projector.
4. The input source can be controlled from the display. The switcher have a
capability of being controlled via Front push button, Remote control or RS232
Control.
CONNECTION DIAGRAM:
Back Panel:
①
INPUT
Blu-Ray DVD Player
HDMI Input1
HDMI Input2
HDMI Input3
INPUT
HDMI Input4
Blu-Ray DVD Player
INPUT
②
HDMI 4x1 Quad Multi-Viewer
With Seamless Switcher
INPUT
Blu-Ray DVD Player
OUTPUT
HDTV
Blu-Ray DVD Player
1: IN1,2,3,4 LED: These blue LED illuminates when the device is connected
with the sources.
2: HDMI Input1.2.3.4: These HDMI Inputs are where you connect the HDMI
source output from DVD,PS3,Set-top Box and Note Book.
3
4
DETAIL DESCRIPTION OF DISPLAY MODE:
PC CONTROLLER USER GUIDE:
The product provides 5 multi-viewer display modes as below Mode1 ~ 5.
MODE1: The four HDMI input sources are displayed in 2x2 on one screen.
MODE2: The four HDMI input sources are displayed with one bigger and
three smaller windows onone screen.
MODE3: The four HDMI input sources are displayed H-spilt on one screen.
MODE4: The two HDMI input sources are displayed in 2x1 on one screen.
MODE5: This is the full screen mode, press IN1 ~ IN4 button will select the
corresponding channeland displayed in full screen as a seamless switcher.
Installation
The PC controller is green software. Just use a cable to connect the PC via
RS232 port and copy “ IR_RS232.exe” to PC to complete installation.
(Please download the software from our website.)
Preparation
1. Connect PC and multi-viewer by RS232 cable (headers of both sides of
cable should be FEMALE)
2. Power-up multi-viewer
3. Double click “ IR_RS232.exe” icon to run it, then see the following picture.
RS-232:
The unit provides a path to pass through the RS232
signal, connect to your RS232 devices, such as PC,IP
Camera, Creston control panel, Smart Matrix, printer
and Scanner and so on. It works when TX, RX and
your RS232 devices baud rate is the same.
REMOTE CONTROL:
ON/OFF: Power on/off switch.
Mode select button(M1-M5,H,1/2,3/4,Ch1-Ch4, 13 24 ):
Press these buttons,the quad multi-viewer will select
the Corresponding mode, see the detail description of
display mode.
Blank button: None function.
Audio Select button(♪1- ♪4): Press these buttons to
select the audio from the input sources
Mute button: Turn off Sound
H/S Resolution button:upscale 720P signal into
1080P or downscale 1080P signal into 720P.
5
SPECIFICATIONS:
1. Select PC connect COM port，to make sure your PC’s COM port is the
same as the software’s COM port(default COM6).If not, please revise the
COM port in the software.Then double click to connect or disconnect PC
and multi-viewer.
2. Select the HDMI output resolution.
3. Select the audio from the input sources
4. Select the output mode, see the detail description of display mode.
Signal Inputs/Output
Maximum Single Link Range
HDMI Input/Output Connector
Operating Frequency
Vertical Frequency Range
Video Amplifier Bandwidth
Resolutions
Input Resolution
Output Resolution
Mechanical Data
Dimensions
Weight
Chassis Material
Color
Warranty
Limited Warranty
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Power Requirement
External Power Supply
Power Consumption(max)
Regulatory Approvals
Main Unit
Power Supply
1
4
6
3
2
1920x1080@60
Type A 19 pin
50/60Hz
2.25Gbps
480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/60Hz,
1080i50/60Hz,1080p24/25/30/50/60Hz
720p,1080p
148.5mm(W) X 103mm (D) X 21.5mm(H)
342g
Metal
Black
1 Year Parts and Labor
0 ℃to +70℃
10% to 85 % RH (no condensation)
-10℃to +80℃
5% to 90 % RH (no condensation)
12V DC@2A
10 W
FCC,CE
UL,CE,FCC, REACH, ROHS
4
7
8