EIKI 2BFNS-A8 A8 Bluetooth Audio User Guide

* Please read instructions before using
Buttons and operational instructions
Connect the Bluetooth
① Switch Mode:Switching between Bluetooth, FM Radio,
Flash Drive and AUX Input mode
② Previous Song/Vol Down:Press for Previous Song,
Hold and press Volume Down
Front
The first time connection, change to Bluetooth mode press
M key (Switch Mode) button. Turn on Bluetooth mode
on mobile device, search for "EBS10" and pairing. There
will be a prompt sound after pairing is successful.
③ Play/Pause:Press to play or pause.
Press and hold for connecting or
disconnecting the slave unit
A8
④ Next Song/Vol Up:Press for Next Song, press and
hold for Volume Up
User Guide
⑥ AUX Port:AUX Audio Input
⑧ Type C Port:5V 2A Charging Port
Buttons and ports
⑨ USB Port:Support MP3,WMA and other mainstream
audio formats
Brilliant of Sound Clarity
Product Description
Please insert 2 x AA battery on the remote before using.
This is an infrared remote control, the coverage will be in front of
speaker and up to 45 degree ratio sensitive (left & right)
Speaker
Remote Area
Remote Controller
On/Off
Vol Up
Previous
Deep Bass, Powerful Audio
20W of deep bass and punchy sound delivered from 2
full-range speaker drivers and a passive radiator.
Sequential Loop
Single Loop
Play/Pause
Next
Vol Down
Bluetooth Mode
USB Mode
Press and hold to connect or
disconnect current speaker
Aux Input
Radio Mode
An Ultra-Portable / Wall-Mount Speaker with the
Latest Design
Equipped with the latest technology including Bluetooth
5.1 & USB-C, T2 Plus is engineered to deliver deep
bass and punchy sound in a compact size.
All-Day Playtime
Keep your favorite playlist going on with up to 14 hours /
500 songs on a single charge.
*On a 50% volume level.
Indicator Light
Mute
Method 1: Press and hold M Key (Switch Mode)
Method 2: lPress and hold "BT" button above the remote
control.
Connect 2 units at the same time
⑤ Switch Device:On/Off Button
⑦ Light:Indicator Light
Remote button instructions
Disconnect Bluetooth
Stereo Sound, Double Fun
Pair up to two speaker for a more stereo surround sound
to bring your party to life.
Press and hold on play/pause button for about 3 seconds
Complete the same step settings; If you need to
disconnect the synchronization, you can press and hold
on Play/Pause button about 3 seconds.
Tips: It is recommended to put the two speakers nearer
before synchronization for a smoother operation.
FM Selection Mode
Long press Play/Pause button up to 3 seconds. Speaker
will auto search for FM channel. Once done, press on
Next or Previous bottom for FM channel selection.
Warranty Card
Product Specifications
Specification:Power Out: 2x10W=20W
Speaker Size: Φ66mmX2 +modals 42mmX78mmX2
Speaker Material: Neodymium Magnet
Frequency Range: 60-20kHz
SNR: ≥86dB
Distortion Factor: ≤1%
Receive Distance: More Than 10m
Bluetooth Version: 5.1
Charging: USB Type-C 5V/2A
Input: AUX (3.5mm) Input, USB Input & FM Radio
USB Support Format: WAV, MP3, WMA, APE, FLAC
Built-in Lithium Battery: 5000mah
Charging Time: ≤4 hours
Working Time : Min 14hours
Product Size: 198x198x45mm
Product Weight: 590g
Color of Speaker: White
Package Come With:2m USB Charging Cable and
Remote Control
Product packaging list
1.Main Product
2.User Guide
3.Wall accessories(including screws)
4.Charging cable
5. Remote controller
Product model
Purchase from
Purchase date
Buyer Detail
Name:
Phone:
Address:
Maintenance Record
Description
Processing
Sign:
Tips:Please keep this card for warranty purposes
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device
can be used in porlable exposure condition without restriction.