Media Guide Extension Maintenance Kit
Installation Instructions
This kit includes the parts and documentation necessary to install the media guide extension maintenance
kit into the following printers:
•
ZT410/ZT420
Read these instructions thoroughly before installing this kit.
Parts List
Before proceeding, verify that your kit contains the following items. To reorder specific parts, navigate to
Zebra.com/parts, and select your printer model.
Item
Ref
Description
Media guide extension
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners. © 2024 Zebra Technologies Corp. and/or
its affiliates. All rights reserved. | www.zebra.com | PATENTS: ip.zebra.com
Qty
5
P1096477-03EN
Install the Media Guide Extension
1. Pull out the media guide (1) as far as you can.
1
2
3
4
4
4
1
Media guide
2
Hole in media guide
3
Dimple
4
Media guide extension
2. Slide the media guide extension onto the media guide until it snaps into the hole in the media guide.
3. Reset the position of the media guide to the edge of the media.
The installation is complete.
2
">
