Liquid Ears HPK13173 Bud Style Wireless Earphones User Manual

BUD STYLE
WIRELESS EARPHONES
HPK13173/ HPW13174/ HPB13177
Product Overview & Functions:
Earphone
Power Button
LED Indicator
Specifications:
Bluetooth® Version
Driver Size
Charge Case Charging Time
Earphone Battery Type
Charge Case Battery Type
Sensitivity
Frequency Response
Impedance
Bluetooth Range
Standby Time
Play Time
Operation Temperature
: 5.4
: 10mm
: 1.5hr
: Li-polymer 3.7V/40mAh
: 3.7V/300mAh
: 107.5dB ± 3dB
: 20Hz – 20KHz
: 32 Ohm
: 10m
: 60 Hours
: 20 Hours
: 0° - 45°C
How to use these Earphones:
Automatic Synchronizing
• When the earphones are removed from the case they
will automatically turn ON and sync to each other, You
are now ready to pair to your device. If they have
previously been paired to a device, they will
automatically re-connect.
Pairing with Your Devices
• Look for "LE TWS" on your device in the Bluetooth
menu and select it to connect. You will hear a voice
prompt "Connected", and the LED indicators will stop
flashing. You are now connected.
Pairing Just One Earphone with Your Devices
• Take either one of the earphones out from the charging
case, it will automatically turn on. The LED indicator on
the earphone stem will flash. Look for "LE TWS" on
your device in your Bluetooth menu and select it to
connect. You will hear a voice prompt "Connected",
and the earphone LED indicator will stop flashing. You
are now connected.
Note: Earphones will automatically turn OFF if there is no
operation for 3 minutes after switching on.
Battery Charging (Charging Case)
• Connect the USB-C charging cable into the socket on
the charging case.
• Plug the cable into a standard USB 5V power output.
• The white LED indicator will flash while the case is
• Charging and will then stay on when fully charged.
(Note: Before using the charging case for the first time,
we recommend you fully charge the battery. A full
charge takes around 1.5 hours).
• When fully charged, unplug the charging cable from the
power socket.
Note: The charging case will stop working when the
battery is low.
Earphone Charging
• When the earphones battery power is low, the LED
indicator will flash red slowly and you will hear a voice
prompt reminding you to recharge the device.
• Put the earphones into the charging case, ensuring that
the earphones are pushed down all the way.
• If the earphones are on, they will automatically turn
OFF when inserted into the case for charging.
(Note: The earphones come with a built-in rechargeable
battery. Before using them for the first time, we
recommend you fully charge the battery. A full charge
takes around 1 hour).
• The white LED indicator on the charging case will be on
when charging the earphones and the charging case
LED indicator will turn off when charging is complete.
• When the earphones are removed from the case they
will automatically turn ON and sync to each other. If
they have previously been paired to your device, they
will also automatically re-connect.
Warning: The earphones can only be used with the
provided charge case.
Operation:
Note: Some features may differ pending paired device
software versions and platforms. Before using the
earphones for the first time, place both earphones into
the supplied charging case once and then remove them.
This will activate the multifunction button option.
Play / Pause
Answer/ End Calls
Reject Incoming Calls
Previous Track
Next Track
Volume Volume +
Voice Assistant
Left Earphone (L)
Right Earphone (R)
Single Click
Single Click
Press and Hold
Double Click
Single Click
Single Click
Press and Hold
Double Click
Triple Click
Press and Hold
Triple Click
Press and Hold
Auto Power Off:
Earphones will automatically turn off if there is no
operation for 3 minutes after removing from the charging
case.
Read this user manual before using the product.
Keep the user manual for future reference and include it when passing product
to third parties
Liquid Ears will not in any way be held responsible for injury or damage caused
to persons or property arising from misuse of the product.
WARNING The USB power cable has been meticulously designed and
optimized for use exclusively with the product it accompanies. Using the USB
power cable with devices other than the one intended could cause electrical
hazards such as overheating, short-circuiting, or even damage to your device.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by The Crest Company is under
licence. Other trademarks and trade names are those of their respective owners.
v3