PENTAX WG-8 Digital Compact Camera Operating Manual

Operating Manual
The serial number is located inside the battery/card cover.
Chapter 1: Introduction
Read this chapter before use.
This chapter gives you an overview of the PENTAX WG-8.
Chapter 2: Getting Started
Read this chapter before using the PENTAX WG-8 for the first time.
This chapter explains about basic operations such as turning the camera on,
performing shooting, and playing back images.
Chapter 3 and later
Read these chapters when you want to learn more about the different
camera functions.
These chapters explain about shooting and playback functions, as well as
how to customize the camera settings and use it with a computer.
Model: R08050
Regarding User Registration
Thank you for purchasing the PENTAX WG-8.
In order to provide you with the best customer support and service experience for the product you have purchased, we ask you to complete the user
registration.
Visit the following website to complete the user registration.
https://www.ricoh-imaging.com/registration/
Registered users will be notified by e-mail about important customer support information, such as firmware version updates, etc.
Introduction
This Operating Manual provides information on how to use the shooting and playback
functions of this camera and related precautions.
Thoroughly read this Operating Manual to make the best use of the functions available
with this camera. Be sure to keep this Operating Manual for future reference.
It is recommended to update the camera firmware to the latest version before using
the camera.
For details on the latest firmware version, refer to the following firmware download site.
https://www.ricoh-imaging.co.jp/english/
RICOH IMAGING COMPANY, LTD.
Safety precautions
Read all safety precautions thoroughly to ensure safe use.
Test shots
Take test shots to ensure that the camera is working properly before taking pictures on important occasions.
Copyright
Reproduction or alteration of copyrighted documents, magazines,
and other materials, other than for personal, home, or other similarly limited purposes, without the consent of the copyright holder,
is prohibited.
Exemption from liability
RICOH IMAGING COMPANY assumes no liability for failure to record
or display images as a result of product malfunction.
Radio interference
Operating this camera in the vicinity of other electronic equipment
may adversely affect both the camera and the other device. Interference is particularly likely if the camera is used in close proximity
to a radio/TV receiver. In such case, take the following measures.
• Keep the camera as far away as possible from the radio/TV receiver.
• Reorient the antenna of the radio/TV receiver.
• Use a different wall outlet.
This publication may not be reproduced in whole or in part without RICOH IMAGING COMPANY’s express written
permission.
© RICOH IMAGING COMPANY, LTD. 2024
RICOH IMAGING COMPANY reserves the right to change the contents of this manual at any time without prior
notice.
Every effort has been made to ensure the accuracy of the information in this manual. Should you nevertheless
notice any errors or omissions, we would be grateful if you would notify us at the address listed on the back cover
of this manual.
1
Trademarks
• Microsoft, Windows, and Microsoft Teams are registered trademarks of Microsoft Corporation in the United States
of America and other countries.
• Skype is a registered trademark or trademark of Microsoft Corporation in the United States of America and other
countries.
• The Skype name and associated trademarks are trademarks of Skype or related entities.
• Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
• SDXC Logo is a trademark of SD-3C, LLC.
• FlashAir is a trademark of KIOXIA Corporation.
• USB Type-C is a trademark of USB Implementers Forum.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and/or other countries.
• Facebook Messenger is a registered trademark or trademark of Facebook, Inc.
• Google Meet is a registered trademark or trademark of Google LLC in the United States of America and other
countries.
• Cisco Webex is a registered trademark or trademark of Cisco Systems, Inc. in the United States of America and
other countries.
• Zoom is a registered trademark or trademark of Zoom Video Communications, Inc. in the United States of America
and other countries.
All other trademarks are the property of their respective owners.
• This product uses the RICOH RT font designed by RICOH COMPANY, LTD.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses
in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”)
and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained
from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from Via Licensing Alliance.
See: https://www.via-la.com/
2
Safety Precautions
Warning Symbols
Various symbols are used throughout this Operating Manual and on the product to
prevent physical harm to you or other people and damage to property. The symbols
and their meanings are explained below.
Danger
This symbol indicates matters that may lead to imminent risk of
death or serious injury if ignored or incorrectly handled.
symbol indicates matters that may lead to death or serious injury
Warning This
if ignored or incorrectly handled.
Caution
This symbol indicates matters that may lead to injury or property
damage if ignored or incorrectly handled.
Meaning of Symbols
The
symbol alerts you to actions that must be performed.
The
symbol alerts you to prohibited actions.
The
symbol may be combined with other symbols to indicate that a specific action is prohibited.
Example:
: Do not touch
: Do not disassemble
Observe the following precautions to ensure safe use of this camera.
Danger
Q
Q
Q
Q
Q
Do not attempt to disassemble, repair, or alter the camera yourself. The
high-voltage circuitry in the equipment poses significant electrical hazard.
Do not attempt to disassemble, alter, or directly solder the battery.
Do not put the battery in a fire, attempt to heat it, or use or leave it in a
high temperature environment such as next to a fire or inside a car. Do not
put it into water or the sea or allow it to get wet.
Do not attempt to pierce, hit, compress, drop, or subject the battery to any
other severe impact or force.
Do not use a battery that is significantly damaged or deformed.
3
Warning
Q
Q
Turn off the power immediately in the event of abnormalities such as
smoke or unusual odors being emitted. Remove the battery as soon as
possible, being careful to avoid electric shocks or burns. If you are drawing
power from a household electrical outlet, be sure to unplug the power
plug from the outlet. Failure to observe this precaution could result in
fire or electric shocks. Contact the nearest service center at your earliest
convenience. Stop using the camera immediately if it is malfunctioning.
Turn off the power immediately if any metallic object, water, liquid, or other foreign object gets into the camera. Remove the battery and memory
card as soon as possible, being careful to avoid electric shocks or burns.
If you are drawing power from a household electrical outlet, be sure to
unplug the power plug from the outlet. Failure to observe this precaution
could result in fire or electric shocks. Contact the nearest service center
at your earliest convenience. Stop using the camera immediately if it is
malfunctioning.
If the monitor is damaged, avoid any contact with the liquid crystal inside it.
Follow the appropriate emergency measures below.
• SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the
affected area thoroughly with water, then wash well with soap.
• EYES: If it gets in your eyes, wash your eyes with clean water for at least 15
minutes and seek medical advice immediately.
• INGESTION: If any of the liquid crystal is ingested, rinse the mouth out
thoroughly with water. Have the person drink a large amount of water and
induce vomiting. Seek medical assistance immediately.
Q
Q
•
•
•
•
Follow these precautions to prevent the battery from leaking, overheating, igniting, or exploding.
Do not use a battery other than those specifically recommended for the
camera.
Do not carry or store the battery together with metal objects such as ballpoint pens, necklaces, coins, and hairpins.
Do not put the battery into a microwave or high pressure container.
If leakage of battery fluid, a strange odor, color change, etc. is noticed
during use or during charging, remove the battery from the camera or
battery charger immediately and keep it away from fire.
Observe the following in order to prevent fire, electrical shock, or cracking
of the battery while charging.
• Use only the indicated power supply voltage. Also avoid the use of
multi-socket adapters and extension cords.
• Do not damage, bundle, or alter the AC plug cord. Also, do not place heavy
objects on, stretch, or bend the AC plug cord.
• Do not connect or disconnect the power plug with wet hands. Always grip
the plug section when disconnecting a power plug. Do not cover the camera while charging the battery.
Q
4
Q
Q
Q
Q
Keep the battery and SD memory card used in the camera out of the reach
of children to prevent accidental swallowing. The battery and memory
card are harmful if swallowed. Seek medical assistance immediately.
Keep the camera out of the reach of children. For children, accidents may
occur because they cannot understand the contents of “Safety Precautions” and “Precautions for Use”.
Do not touch the internal components of the camera if they become exposed as a result of being dropped or damaged. The high-voltage circuitry
in the equipment could lead to electric shocks. Remove the battery as
soon as possible, being careful to avoid electric shocks or burns. Take the
camera to your nearest dealer or service center if it is damaged.
When using the camera in wet areas such as a kitchen, be careful not to
wet the inside of the camera. Failure to observe this precaution could result in fire or electric shocks.
Do not use the camera near flammable gases, gasoline, benzine, thinner,
or similar substances. Failure to observe this precaution could result in an
explosion, fire, or burns.
Q Do not use the camera in a location where usage is restricted or prohibited, such as on airplanes. Failure to observe this precaution could result
in an accident.
Q
Wipe off any dust that accumulates on the power plug. Failure to observe
this precaution could result in fire.
Q When using a household power outlet, always use the dedicated AC
adapter. Failure to observe this precaution could result in fire, electric
shocks, or product malfunction.
Q
Q
Do not use the battery charger or AC adapter with commercially available
electronic transformers when traveling abroad. Failure to observe this precaution could result in fire, electric shocks, or product malfunction.
5
Caution
Q
Q
Q
Q
Q
Q
Q
Q
Safety Precautions
for Accessories
6
Contact with fluid leaking from a battery can lead to burns. If part of your
body comes in contact with a damaged battery, rinse the area with water
immediately. (Do not use soap.)
If a battery starts to leak, remove it immediately from the camera and wipe
the battery chamber thoroughly before replacing it with a new battery.
Plug the power plug securely into the electrical outlets. Failure to observe
this precaution could result in fire.
Do not allow the camera interior to get wet. When operating the camera
with wet hands, be careful not to get the camera interior wet. Failure to
observe this precaution could result in electric shocks.
Do not fire the flash at drivers of vehicles, as this may cause the driver to
lose control and result in a traffic accident. Failure to observe this precaution could result in a traffic accident.
Do not replace the battery with an incorrect type. Failure to observe this
precaution could defeat a safeguard (for example, in the case of some lithium battery type).
Do not dispose of the battery into fire or a hot oven, or mechanically crush
or cut the battery. Failure to observe this precaution could result in an
explosion.
Do not leave the battery in an extremely high temperature surrounding
environment. Failure to observe this precaution could result in an explosion or leakage of flammable liquid or gas.
Do not subject the battery to extremely low air pressure. Failure to observe this precaution could result in an explosion or leakage of flammable
liquid or gas.
When using optional products, carefully read the user’s manuals provided with the product before using that product.
Contents
Introduction............................................................................................................................ 1
Safety Precautions................................................................................................................. 3
1 Introduction
11
Checking the Contents of the Package.......................................................................11
Names and Functions of the Working Parts...............................................................12
Operating Controls............................................................................................................................14
Indicators on the Monitor.................................................................................................16
Shooting Screen..................................................................................................................................16
Playback Screen..................................................................................................................................17
Changing the Screen Display.........................................................................................................18
How to Change Function Settings................................................................................19
Using the Button.................................................................................................................................19
Setting from the Menus...................................................................................................................22
Menu List................................................................................................................................24
A Shooting Menu............................................................................................................................24
B Movie Menu..................................................................................................................................25
C Playback Menu.............................................................................................................................26
D Customize Menu......................................................................................................................... 27
E Setup Menu...................................................................................................................................29
2 Getting Started
31
Setting the Battery and a Memory Card.....................................................................31
Inserting the Battery and a Memory Card.................................................................................31
Charging the Battery.........................................................................................................................33
Initial Settings.......................................................................................................................35
Turning the Camera On....................................................................................................................35
Setting the Language and the Date and Time......................................................................... 36
Formatting a Memory Card.............................................................................................................37
Basic Shooting Operation.................................................................................................38
Shooting in the Auto Mode............................................................................................................38
Viewing the Captured Images....................................................................................................... 39
3 Shooting
40
Taking Still Images..............................................................................................................40
Setting the Capture Mode...............................................................................................................40
Using Exposure Compensation.....................................................................................................43
Recording Movies................................................................................................................44
Playing Back Movies..........................................................................................................................46
7
Using the Camera as a Webcam.....................................................................................47
Installing the Camera........................................................................................................................47
Setting the Focus Mode....................................................................................................49
Focusing Manually (Manual Focus)..............................................................................................51
Setting the Exposure..........................................................................................................52
Selecting a Metering Method........................................................................................................52
Setting the ISO Sensitivity...............................................................................................................53
Using the Flash....................................................................................................................................54
Setting the White Balance................................................................................................56
Setting the White Balance Manually............................................................................................57
Setting the Drive Mode.....................................................................................................58
Shooting Using the Self-timer.......................................................................................................58
Shooting Continuously.....................................................................................................................59
Shooting Using the Remote Control Unit.................................................................................. 60
Shooting with Varied Exposure Values.......................................................................................61
Configuring the Capture Settings.................................................................................62
Image Capture Settings....................................................................................................................62
Movie Capture Settings....................................................................................................................62
Setting the Image Finishing Tone and Correction...................................................63
Setting the Image Atmosphere (Image Tone).......................................................................... 63
Setting the Sharpness, Saturation, Tone, and Contrast......................................................... 64
Imprinting the Date on Still Images.............................................................................................64
Taking Images with Clearer Details..............................................................................................64
Correcting a Range of Tones (D-Range Setting)...................................................................... 65
Reducing Blurring of Images..........................................................................................................65
4 Playback Functions
66
Changing the Playback Method.....................................................................................66
Displaying Multiple Images............................................................................................................66
Playing Back Images Continuously (Slideshow)...................................................................... 67
Displaying Rotated Images.............................................................................................................68
Connecting the Camera to an AV Device................................................................................... 69
Organizing Files....................................................................................................................70
Deleting Files........................................................................................................................................70
Copying Images..................................................................................................................................71
Protecting Images from Deletion.................................................................................................72
Copying Images to a Computer....................................................................................................73
Editing and Processing Images......................................................................................74
Changing the Image Size.................................................................................................................74
Processing Images with Filters.......................................................................................................76
8
Editing Movies.....................................................................................................................................77
Correcting Red Eyes in Images......................................................................................................79
5 Changing the Settings
80
Saving Frequently Used Settings...................................................................................80
Using the Mode Dial..........................................................................................................................80
Exporting the Settings to a File.....................................................................................................81
Customizing the Button Functions...............................................................................82
Registering Functions to the Movie Button.............................................................................. 82
Changing the Functions of the Green Button.......................................................................... 83
Display and Sound Settings.............................................................................................84
Setting the Start-up Screen............................................................................................................84
Setting the Information Displayed when the Camera Is Turned On/Off........................ 84
Setting the Live View Display.........................................................................................................84
Setting the Brightness of the Monitor........................................................................................85
Setting the Lamp................................................................................................................................85
Setting the Sound Volume..............................................................................................................85
Power Saving Settings.......................................................................................................86
Automatically Turning the Power Off..........................................................................................86
Dimming the Display........................................................................................................................ 86
Setting the GPS....................................................................................................................88
Displaying the GPS Information....................................................................................................89
Automatically Adjusting the Date and Time Settings........................................................... 90
Recording the Camera Route.........................................................................................................90
Setting the Direction Information................................................................................................92
Imprinting the GPS Information....................................................................................................93
File Management Settings...............................................................................................94
Specifying the Folder/File Settings..............................................................................................94
Setting the Copyright Information...............................................................................................97
Saving the Local Date and Time of the Specified City........................................................... 99
6 Appendix
100
Attaching Optional Accessories...................................................................................100
Wide Conversion Lens.....................................................................................................................100
AC Adapter..........................................................................................................................................101
Troubleshooting................................................................................................................102
Power Supply.....................................................................................................................................102
Shooting..............................................................................................................................................103
Playback/Deletion............................................................................................................................105
9
Others...................................................................................................................................................106
Error Messages...................................................................................................................................107
Main Specifications...........................................................................................................108
Camera.................................................................................................................................................108
USB Power Adapter AC-U2............................................................................................................111
Rechargeable Battery DB-110......................................................................................................111
Image Storage Capacity.................................................................................................................112
Operating Environment.................................................................................................................113
Using the Camera Abroad..............................................................................................114
Precautions for Use...........................................................................................................115
Camera Care and Storage...............................................................................................118
Warranty Policy..................................................................................................................120
Regulatory Compliance Statements...........................................................................123
Index......................................................................................................................................133
10
Introduction
Checking the Contents of the Package
PENTAX WG-8
Rechargeable
USB power
battery (DB‑110) adapter (AC-U2)
1
Introduction
Before using your digital camera, confirm that the package contains the
items listed below.
Power plug
Macro stand
(O-MS3)
USB cable (I-USB173)
Hand strap (O-ST104)
g Operating Manual (this manual)
g Regarding Waterproof Design
g
g
Macro Stand-------------------------------------------------------------------------------------------------• The macro stand is used to keep a distance of 1 cm between the lens and the subject. Attach the
macro stand to the camera by screwing it into the lens. You can use it in capture modes such as the
digital microscope mode. (p.40)
• When the macro stand is attached to the camera, it may be difficult to focus on the subject depending
on the type of subject.
11
Names and Functions of the Working Parts
AF assist light
1
Flash
Introduction
Strap eyelet
Microphone
Lens
Microphone
Speaker
Ring light
Remote control
receiver
Power button lamp
Strap eyelet
Monitor
Strap eyelet
Remote control
receiver
12
Tripod screw hole
HDMI® micro output terminal
(Type D)
1
Introduction
Release lever
USB terminal (USB Type-C)
Battery/card cover
13
Operating Controls
This section explains about operating controls.
The icons in parentheses are used in the descriptions of this manual.
1
1 2 3
Introduction
4
9
10
11
12
13
5 6 7
1
2
14
Mode dial
Changes the capture mode. (p.40)
Shutter release button (z)
Press to capture images.
Press halfway to activate autofocus. (p.38)
3
Power button
8
Turns the power on or off. (p.35)
4
6
7
8
9
13 OK button (e)
Switches the information displayed on the
shooting screen and playback screen. (p.18)
Confirms the selected items when setting a
function.
Flash/Left button (l/c)
1
Focus/Down button (s/b)
Introduction
5
Movie/ADJ. button
In the still image mode, press to start and end
the movie recording. (p.44)
Calls ADJ. mode functions when the functions
are assigned to the button. (p.20)
Changes the flash mode. (p.54)
Moves the cursor to the left when an item is
selected.
Changes the focus mode. (p.49)
Moves the cursor down when an item is selected.
MENU button (f)
Displays a menu. Press this button while the
menu is displayed to return to the previous
screen. (p.22)
Green/Delete button (i)
Press to perform shooting in the green mode.
(p.40)
When a function is assigned to the button, press
to call the assigned function. (p.21)
In the playback mode, press to delete images.
(p.39)
Zoom button (4 (T)/5 (W))
Changes the zoom magnification. (p.38)
10 Drive/Up button (w/a)
Changes the drive mode. (p.58)
Moves the cursor up when an item is selected.
11 Playback button (g)
Switches between the shooting mode and the
playback mode. (p.39)
12 GPS/Right button (x/d)
Press and hold to turn the GPS function on or
off. (p.89)
Moves the cursor to the right when an item is
selected.
15
Indicators on the Monitor
Shooting Screen
1
Introduction
16
17
18
19
20
21
22
23
24
25
11 12 1314 15
1 2 3 4 5 6 7 8 9 10
99999
4.1x
128° ESE
E:139°
N:35°
X 3 (4)
3d
100PENTX
1
05/05/2024 10:10
Exit
1/400
33
F5.5
6400
42
26
27
28
29
30
31
EV-2.0
34 35 36 37 38 39
32
40 41
Still image mode
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
16
43
0:58´58˝
Drive mode (p.58)
Motion blur reduction/Movie SR (p.65)
Focus mode (p.49)
White balance (p.56)
Image tone (p.63)
Electronic compass information (azimuth)
(p.92)
Electronic compass direction
AE metering (p.52)
Flash mode (p.54)
GPS positioning status (p.89)
FlashAir communication status (p.32)
Aspect ratio (p.62)
Recorded pixels (p.62)
Number of storable images
Storage location (p.32)
Face detection (p.50)
Highlight correction (p.65)
Zoom magnification (p.38)
Digital zoom (p.39)
Shadow correction (p.65)
GPS information (p.89)
GPS positioning quality
Movie mode
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Zoom bar/Focus bar (p.38, p.51)
Date imprint (p.64)
World time (p.99)
Camera shake warning
GPS lock (p.90)
Conversion lens (p.100)
Grid guide (p.84)
Focus frame
Save destination folder (p.94)/
Number of files
Histogram
Capture mode (p.40)
Shutter speed
Operation guide
Aperture value
Electronic level (p.84)
ISO setting (p.52)
Date and time (p.36)
Exposure compensation (p.43)
Battery level (p.17)
Recording indicator
Recording time/Remaining recording time
Playback Screen
1
7
23
4
5
6
99998 /99999
05/05/2024 10:00
1
8
1/2400 F5.5
250
EV+0.7
10
11
12 13
9
999-9999
15
14
Still image mode
Shooting date and time
Image protection (p.72)
GPS information (p.89)
Recorded pixels (p.62)
Current file/Total files
Data source
Face detection (p.50)
Folder number/File number (p.94)
00´ 20˝
Movie mode
Introduction
100-0630
1
2
3
4
5
6
7
8
9998/9999
05/05/2024 10:00
9
10
11
12
13
14
Shutter speed
Aperture value
ISO setting
Exposure compensation
Battery level (p.17)
Length of time of the recorded movie/
Elapsed time
15 Operation guide
Battery Level
The icon display changes depending on the battery level.
The battery level is sufficient.
The battery level started to drop.
The battery level is low. Charge the battery.
The camera will turn off soon.
There is a problem with the battery.
17
Changing the Screen Display
You can switch the information displayed on the screen by pressing e.
1
Shooting Mode
The information displayed on the shooting screen can be switched.
Introduction
Standard information display Displays the standard information such as shooting settings and electronic
level.
Detailed information display
Displays the standard information, electronic compass information, and GPS
information.
Grid guide display
Displays the grid guide.
No information display
Displays the autofocus frame during range-finding.
Display off
Displays the autofocus frame and Live View only when z is pressed
halfway.
Memo---------------------------------------------------------------------------------------------------------• The grid style can be selected in [Grid Guide Display Op.] of the D menu. (p.84)
Playback Mode
You can switch the screen display among “Standard information display”,
“Detailed information display”, and “No information display” in the single
image display.
Use ab to switch the page in “Detailed information display”.
99998 /99999
05/05/2024 10:00
5184x3888
00:00´23˝
10
05/05/2024 10:00
a
35.0mm
42m
N 35°
E138°
b
100-0630
1/2400 F5.5
6400
EV+0.7
EV+
0.7
100-0630
1/2400 F5.5
99998 /99999
XXXXXXXXXXX
123° ESE
05/05/2024
10:10:01
6400
EV+0.7
EV+
0.7
Memo---------------------------------------------------------------------------------------------------------• The displayed information differs between still images and movies.
18
How to Change Function Settings
Using the Button
Using the Direct Keys
a (w)
Drive Mode (p.58)
b (s)
Focus Mode (p.49)
c (l)
Flash Mode (p.54)
Press and hold d (x)
GPS On/Off (p.89)
Introduction
Quick settings are possible by pressing abcd in
the shooting mode. The following functions can be
activated.
1
Memo---------------------------------------------------------------------------------------------------------• The functions mentioned above can be set from the menu by pressing f.
19
Using the ADJ. Mode
The functions assigned to the movie button in [ADJ Button Setting 1] to [ADJ
Button Setting 5] of the D menu can be easily recalled. (p.82)
1
1 Set [Movie Button] to [Off] in the D menu.
The ADJ. mode is enabled.
Introduction
2 Press the movie button in the
shooting mode.
The mode switches to the ADJ. mode and the
icons for the assigned functions appear.
3 Use cd to select a function.
The five functions assigned to the button can
be selected.
4 Press e.
Recorded Pixels
3648x2736
OK
The selected function is set and the camera is ready to perform shooting.
Caution-------------------------------------------------------------------------------------------------------• By default, the movie button functions as the button to start and end the movie recording. When
recording movies with the movie button, set [Movie Button] to [On] in the D menu. (p.44)
20
Using the Green Button
Memo---------------------------------------------------------------------------------------------------------• The function of the green button can be changed in [Green Mode] of the D menu. (p.83)
1
Introduction
The assigned function can be activated by
pressing the green button in the shooting
mode.
By default, [Green Mode] is assigned to the
button. You can perform shooting in the green
mode by pressing the button. (p.40)
21
Setting from the Menus
Most functions are set from the menus.
1
1 Press f.
Introduction
The menu appears.
The menu displayed differs depending on the camera status.
2 When changing the menu type, press
1/4
Shooting
c, and use ab to select a type.
Focus
AF
Auto Macro
Focus Assist
AE Metering
ISO Setting
AUTO ISO Range
Standard
Multi
On
On
Divide
AUTO
125 - 1600
Exit
A
Shooting menu (p.24)
This menu is displayed only in the shooting mode.
B
Movie menu (p.25)
This menu is displayed only in the shooting mode.
C
Playback menu (p.26)
This menu is displayed only in the playback mode.
D
Customize menu (p.27)
E
Setup menu (p.29)
3 Press d.
4 Use ab to select a function to set,
and press d.
The settings for the selected setting item are
displayed.
Setup
LCD Brightness
Power Saving
Outdoor View
Power Button Lamp
Operation Volume
Playback Volume
Sound
3/5
5sec.
Off
On
3
3
Exit
5 Use ab to select a setting, and
press e.
The screen in Step 4 reappears.
Press f to return to the previous screen.
When you have finished setting, press f
several times to return to previous screens.
22
Setup
LCD Brightness
Power Saving
Outdoor View
Power Button Lamp
Operation Volume
Playback Volume
Sound
3/5
5sec.
Off
On
Off
OK
Memo---------------------------------------------------------------------------------------------------------• When f is pressed, the first screen of the A menu or C menu appears. To display the last used
menu screen first, set [Cursor Pos. Keeping] to [On] in the E menu.
• The setting is saved even after the power is turned off. To reset the menu settings, select a menu type
to reset in [Initialized Setting] of the E menu, and execute [Reset] in the E menu.
1
Introduction
23
Menu List
The following menus are available. (The underlined settings and the
square-bracketed settings are the default settings.)
1
Introduction
24
A Shooting Menu
Focus
Standard, Macro, 1cm Macro, PF, Infinity, MF
p.49
AF
Multi, Spot, Tracking
p.50
Auto Macro
On, Off
p.49
Focus Assist
On, Off
p.50
AE Metering
Divide, Center, Spot
p.52
ISO Setting
AUTO, 125 to 6400
p.53
AUTO ISO Range
125 - 200, 125 - 400, 125 - 800, 125 - 1600, 125 - 3200,
125 - 6400
EV Comp.
-2.0 to +2.0
Flash Mode
Auto, Flash Off, Flash On, Auto+R. eye, On+Red-eye, Ring Light p.54
White Balance
Auto WB, Daylight, Shade, Cloudy, Fl. DL Color, Fl. DL White, Fl. p.56
Cool Wt., Fl. Warm Wt., Tungsten, Ring Light, Manual WB
Pix. Track SR
On, Off
p.65
Face Detection
On, Smile, Assist, Assist+Smile, Off
p.50
Blink Detection
On, Off
p.38
Digital Zoom
On, Off
p.39
Drive Mode
Off, Self-timer, Cont. Shoot, Burst Shoot, M-Cont, S-Cont, Re- p.58
mote Ctl, A-Bracket
Ring Light
Select: All, Right, Left, High, Low, Off
p.55
Brightness: 1 to 9 [5]
LightningTime: Always On, Shutter 10s, Shutter 20s, Shutter 30s,
Shutter 60s
Recorded Pixels
L, M, S, XS, VGA
Aspect Ratio
4:3, 3:2, 1:1
Quality Level
8, 9, 0
Image Tone
Bright, Natural, Vibrant, Slide Film, Monochrome
p.63
D-Range Setting
Highlight Cor.: Auto, Off
Shadow Cor.: Auto, Off
p.65
p.43
p.62
Soft, Standard, Hard
Saturation
Soft, Standard, Hard
p.64
Tone Adjustment
Blue, Black & White, Sepia
Contrast
Soft, Standard, Hard
Date Imprint
Date, Date & Time, Time, Off
p.64
IQ Enhancer
On, Off
p.64
Recorded Pixels
4K 30fps, FullHD 30fps, HD 60fps, HD 30fps
p.62
HDR
On, Off
Microphone
On, Off
Wind Suppression
On, Off
Movie SR
On, Off
Movie SR+
On, Off
B Movie Menu
1
Introduction
Sharpness
p.65
25
C Playback Menu
1
Introduction
26
Image Copy
[Internal M]>>>[Card], [Card]>>>[Internal M]
p.71
Protect
1 File, Sel. Multiple, Select All, Cancel All
p.72
Rotation
0°, 90° (counterclockwise), 180°, 90° (clockwise)
p.68
Slideshow
Interval: 30sec., 20sec., 10sec., 5sec., 3sec.
Screen Effect: Wipe, Checker, Fade, Random, Off
Sound Effect: On, Off
p.67
Recover File
—
p.71
Resize
Recorded Pixels: L, M, S, XS, 2M, 1M, VGA
Quality Level: 8, 9, 0
p.74
Cropping
—
p.75
Filter
Small Face Filter: 5%, 7%, 10%
p.76
Ink Rubbing Filter: 1 to 5
Digital Filter: B&W/Sepia, Toy Camera, Retro, Color, Extract Color,
Color Emphasis, High Contrast, Starburst, Soft, Fish-eye, Miniature, Brightness
HDR Filter
Movie Edit
Save as Still Image, Divide Movies, Adding title picture
p.77
Red-eye Edit
—
p.79
Start-up Screen
Start-up screen with operation guide, RICOH, Photographs, Off
p.84
Auto Image Rotation
On, Off
p.68
D Customize Menu
U1, U2
p.80
CALS Pixels
L, M, S, XS, 2M, 1M, VGA
p.40
CALS Quality
8, 9, 0
ADJ Button Setting 1
ADJ Button Setting 2
ADJ Button Setting 3
ADJ Button Setting 4
ADJ Button Setting 5
Off, EV Comp. [Setting1], Recorded Pixels [Setting2], Aspect p.82
Ratio [Setting3], Setting [Setting4], White Balance [Setting5],
Image Tone, Quality Level, AE Metering, AF, Face Detection,
Highlight Cor., Shadow Cor., Outdoor View
Green Mode
Green Mode, EV Comp., Recorded Pixels, Quality Level, Aspect p.83
Ratio, White Balance, Setting, AF, Face Detection, Auto Macro, AE
Metering, Highlight Cor., Shadow Cor., Sharpness, Saturation/
Tone Adjustment, Contrast, Outdoor View
START DATE/TIME
On, Off
Show folder at startup
On, Off
Shut-down Screen
On, Off
Confirm. Time
0.5sec., 1sec., 2sec., 3sec., HOLD, Off
p.38
Quick Zoom
On, Off
p.39
Grid Guide Display Op.
9 Divide, 16 Divide
p.84
GPS
On, Off
p.89
GPS Disp Mode
LAT/LON, UTM, MGRS
GPS Lock
On, Off
GPS Time Adjustment
On, Off
p.90
GPS Log
Record log: Logging Interval, Logging Duration
Save log data: NMEA, KML
Discard log data
p.90
Compass Heading
Off, Cardinal, Degrees, Cardinal/Deg.
p.92
Compass Calibration
—
Declination
TRUE, MAG
Level Setting
Off, Level + Shift, Level
Calibrate Level
Reset
Calibration
Data Imprint
GPS Data Imprint: LAT/LON, UTM, MGRS, Off
UTC Data Imprint: On, Off
Heading Data Imprint: On, Off
1
Introduction
Reg. USER
p.84
p.84
p.93
27
1
Introduction
28
Lens Adapter On
Off, WIDE
p.100
Movie Button
On, Off
p.45
E Setup Menu
—
Format [Internal M]
—
p.37
New folder options
Standard, Date, Custom
p.94
File name
Standard, Custom
p.96
File Sequence No.
On, Off
p.96
Reset File Number
—
p.97
Embed Info
On, Off
p.97
Copyright Info
A freely defined string of 32 characters
Copyright Print
On(OVR), On(New), Off
Copyright Position
Left, Middle, Right
Copyright Font Size
Large, Middle, Small
Copyright Color
Orange, White, Black, Red, Blue, Green, Yellow
Guide Display
On, Off
p.42
Cursor Pos. Keeping
On, Off
p.23
LCD Brightness
-4 to +4
p.85
Power Saving
Off, 5sec., 15sec., 30sec., 1min., 2min.
p.86
Outdoor View
-2 to +2
p.85
Power Button Lamp
On, Off
p.85
Operation Volume
Off, 1 to 5 [3]
p.85
Playback Volume
Off, 1 to 8 [3]
Sound
Startup Sound, Shutter Sound, Operation Sound, Self-timer
Sound
Auto Power Off
1min., 3min., 5min., 10min., 30min., Off
p.86
Monitor Auto off Delay
Off, 1min., 5min., 30min.
p.86
Power Button Hold Op.
On, Off
p.35
Certifications
—
—
Version Info
—
—
Camera Settings File
Write, Read
p.81
USB Connection
MSC, MTP, UVC
p.47,
p.73
HDMI Out
AUTO, 2160P (4K), 1080i, 720P, 480P
p.69
FlashAir Connection
On, Off
p.32
1
Introduction
Format [Card]
p.98
29
1
Introduction
30
Language/H
English, French, German, Spanish, Portuguese, Italian, Dutch, p.36
Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,
Greek, Russian, Thai, Korean, Traditional Chinese, Simplified
Chinese, Japanese
Date Adjustment
Date Format: Y/M/D, D/M/Y, M/D/Y
Date: January 1, 2024 to December 31, 2045
Time: 00:00 to 23:59
p.36
World Time
Select Time: Hometown, Destination
Hometown: City, DST
Destination: City, DST
p.99
Initialized Setting
Still, Movie, Playback, Customize, Setup, Quality
p.23
Reset
—
Getting Started
Setting the Battery and a Memory Card
Inserting the Battery and a Memory Card
1 Make sure that the camera power is off.
2 Slide the release lever on the bottom
of the camera toward OPEN, and slide
the battery/card cover to the right to
open it.
2
Getting Started
SD memory cards, SDHC memory cards, and SDXC memory cards can be
used with this camera. “Memory card” refers to these memory cards in this
manual.
1
2
3 Make sure that the memory card is
facing the right way and then push
the card all the way in until it clicks.
To remove it, press in the memory card and
then release your hand.
4 Insert the battery.
Use the rechargeable battery (DB-110) to
press the latch and insert the battery all the
way into the battery compartment.
To remove the battery, slide the latch.
5 Close the battery/card cover and slide
it to the left.
Slide the battery/card cover until it clicks and
confirm that it is closed securely.
31
Caution-------------------------------------------------------------------------------------------------------• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand
adhering to the camera, and avoid locations where dirt can enter the camera interior.
• Close the battery/card cover securely. If the battery/card cover is not closed securely, water or dust
may enter the camera interior.
Data Storage Location
2
Getting Started
32
Images taken and movies recorded with this camera are saved in the internal
memory or a memory card.
Memo---------------------------------------------------------------------------------------------------------• Saved images can be copied between the internal memory and the memory card. (p.71)
• The storage capacity varies depending on the memory card. (p.112)
FlashAir Card------------------------------------------------------------------------------------------------• An SD memory card with a built-in wireless LAN function (FlashAir card) can be used with the camera.
When communicating using the FlashAir card, set [FlashAir Connection] to [On] in the E menu. If
the write-protect switch of the FlashAir card is locked, the settings cannot be made.
• Use of an access point and an Internet connection are required for transferring images via a wireless
LAN. For details, refer to the card manufacturer’s website, etc.
• The operability of FlashAir card functions including the wireless transmission function is not guaranteed with this camera. Contact the FlashAir card manufacturer regarding any malfunctions or problems concerning FlashAir cards. FlashAir cards can be used only in the country in which the card was
purchased. For details, contact the FlashAir card manufacturer.
Charging the Battery
Charge the rechargeable battery DB-110 using the provided USB cable, USB
power adapter, and power plug before use.
1 Insert the power plug to the USB
power adapter.
2
Insert it until it clicks into place.
Getting Started
2 Open the battery/card cover, and
connect the USB cable to the USB
terminal.
3 Connect the USB cable to the USB
power adapter.
4 Plug the USB power adapter into a
4
power outlet.
The power button lamp of the camera turns
on and charging starts.
Depending on the battery level, the charging
time differs. An exhausted battery will be fully recharged in about 3 hours (at 25°C (77°F)).
When charging is complete, the power button lamp turns off.
3
5 Remove the USB cable from the USB
terminal, and close the battery/card cover.
6 Unplug the USB power adapter from the power outlet.
33
Storage Capacity--------------------------------------------------------------------------------------------• About 340 pictures can be taken when the battery is fully charged.
• This is based on tests conducted according to CIPA standards under the following conditions: At 23°C
(73°F) temperature; the monitor is on; a picture is taken every 30 seconds; the flash is fired every two
pictures; the camera is turned off and back on after 10 pictures are taken.
• The storage capacity is for reference. For long periods of use, it is recommended that you carry spare
batteries.
2
Caution--------------------------------------------------------------------------------------------------------
Getting Started
• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand
adhering to the camera, and avoid locations where dirt can enter the camera interior.
• Use only genuine rechargeable battery (DB-110).
• If the battery starts to run down more quickly even after being charged, the battery has reached the
end of its service life. In this case, replace the battery with a new one.
• The battery may become very hot immediately after operation. Turn the camera off and leave it to
cool down sufficiently before removing the battery.
Memo---------------------------------------------------------------------------------------------------------• You can also charge the battery by connecting the camera to a computer using the USB cable. (p.73)
• The battery can be recharged with the optional battery charger BJ-11.
34
Initial Settings
Turn the camera on and make the initial settings.
Turning the Camera On
1 Press the power button.
2
Getting Started
The power button lamp turns on.
The first time the camera is turned on after
purchase, the [Language/H] screen appears.
When the power button is pressed again, the
power turns off.
Memo---------------------------------------------------------------------------------------------------------• When g is pressed and held with the camera turned off, the camera turns on in the playback mode.
The following operations are available.
• The power button lamp can be set to [Off] in [Power Button Lamp] of the E menu. (p.85)
• If no operations are made for about one minute (default setting), the camera turns off automatically
to suppress battery drain. The power saving function can be set in the E menu. (p.86)
• The display of the start-up screen can be set in [Start-up Screen] of the C menu. (p.84)
• You can also make settings so that the camera is turned on and off by pressing and holding the power
button to prevent misoperation. When [Power Button Hold Op.] is set to [On] in the E menu, press
and hold the power button for about 2 seconds to turn the camera on, and press and hold for about
5 seconds to turn the camera off.
35
Setting the Language and the Date and Time
You can set the display language for menus and the date and time.
1 Use ab to select a language and press e.
The selected language is set and the [Date Adjustment] screen appears.
2
2 Set the display format and the date
and time.
Getting Started
Use cd to select an item and ab to
change the value.
Press f to cancel the setting.
3 Press e.
Date Adjustment
Set the date, time, and format.
M/D/Y
01
/ 01 / 2024
00 ： 00
01/01/2024 00:00
Cancel
OK
The date and time are set and the camera is ready to take a picture.
Memo---------------------------------------------------------------------------------------------------------• If the battery is removed for about five days, the date and time settings will be lost. To retain the
date and time settings, insert a battery with sufficient power for at least two hours, and then remove
the battery.
• You can change the language and the date and time settings in the E menu.
36
Formatting a Memory Card
When using a new memory card or a memory card used with another device, be sure to format the memory card with this camera. The internal memory can also be formatted with the same operations.
1 Press f.
2
The menu appears.
Setup
Format [Card]
Format [Internal M]
New folder options
File name
File Sequence No.
Reset File Number
Embed Info
1/5
Standard
Standard
On
Off
Exit
3 Press d, select [Format [Card]], and press d.
Getting Started
2 Press c, and use ab to select E.
When formatting the internal memory, select [Format [Internal M]].
4 Use a to select [Execute], and press
e.
The memory is formatted.
All data will be erased.
Execute
Cancel
OK
5 Press e.
6 Press f.
The shooting screen reappears.
Caution-------------------------------------------------------------------------------------------------------• Do not remove the memory card while formatting, or the card may be damaged.
• Formatting deletes all data, both protected and unprotected.
• Do not format FlashAir cards with this camera.
37
Basic Shooting Operation
Shooting in the Auto Mode
The camera automatically selects the optimal capture mode.
2
1 Set the mode dial to S.
Getting Started
2 Use 4 (T)/5 (W) to change the zoom magnification.
The capture mode is set to S, and the
Live View is displayed.
The optical zoom up to 5x magnification is available. The digital zoom up to
40.5x magnification is available by further pressing 4.
3 Press z halfway.
The capture mode is selected, and the focus
is adjusted.
When the subject cannot be in focus, the red
frame appears.
4 Press z fully.
1/400
F5.6
400
The image you have just taken is displayed on the monitor (Instant Review)
and saved.
Instant Review and Blink Detection--------------------------------------------------------------------• You can set the display time of Instant Review in [Confirm. Time] of the D menu. When set to
[Hold], the Instant Review is displayed until z is pressed halfway or the mode dial is turned.
• If the camera detects that the subject’s eyes are closed, the message [Closed eyes have been detected]
appears during Instant Review. You can also set [Blink Detection] to [Off] in the A menu to disable
this function.
38
Zoom----------------------------------------------------------------------------------------------------------• When 4 is pressed and held, the zooming method switches from the optical zoom to the intelligent
zoom. If 4 is release and pressed again, the zooming method switches from the intelligent zoom to
the digital zoom with up to 40.5x magnification. The digital zoom magnification varies depending on
the [Recorded Pixels] settings in the A menu.
• The quality of images captured with the digital zoom slightly deteriorates. You can set whether to use
the digital zoom in [Digital Zoom] of the A menu.
2
Review the captured image on the monitor.
1 Press g.
The camera switches to the playback mode
and the last image you took is displayed. (Single image display)
Getting Started
Viewing the Captured Images
2 View an image.
The following operations are available.
cd
Displays the previous or next image.
Press and hold cd
Fast-reverses/Fast-forwards playback.
ab
Reverses/Forwards playback by 10 frames.
i
Deletes the image.
4 (T)
Magnifies the image.
5 (W)
In magnified view: Reduces the image.
abcd
In magnified view: Moves the magnified area.
e
Switches the displayed information.
Memo---------------------------------------------------------------------------------------------------------• Movies cannot be magnified.
• When [Quick Zoom] is set to [On] in the D menu, pressing 4 once magnifies the image at the
maximum magnification.
39
Shooting
Taking Still Images
Setting the Capture Mode
Turn the mode dial to select capture modes.
3
Shooting
U
CALS Mode
Takes images with the recorded pixels and quality level set in [CALS Pixels] and
[CALS Quality] of the D menu. The aspect ratio is fixed to [4:3].
By default, the recorded pixels are set to [1M] and the quality level is set to
[9]. These settings are appropriate to take construction site pictures submitted to local authorities.
S
Auto Mode
Takes images with the optimal capture mode automatically selected by the camera. (p.38)
J
Program Mode
Takes images with the shutter speed and aperture value automatically set by the
camera.
T
Scene Mode
Selects a scene from various scenes and takes images with the optimal settings for
the selected scene. (p.41)
Turns the ring light on for shooting at a close focus distance of 1 cm to the subject.
The focus mode, flash mode, recorded pixels, and aspect ratio are fixed to [1cm
V
Macro], [Ring Light], [XS], and [4:3], respectively.
Digital Microscope Mode
You can fix the distance to the subject to 1 cm by attaching the provided macro
stand (p.11) to the camera.
P/Q
User Mode
Uses the saved shooting settings. (p.80)
B
Movie Mode
Records a movie. (p.44)
Green Mode--------------------------------------------------------------------------------------------------• When the green button is pressed, the camera switches to the green mode. In this mode, you can
perform shooting with the standard settings regardless of the capture mode and A menu settings.
Press the green button again to return to the previous capture mode.
• In the green mode, the A menu settings cannot be changed.
• If the camera is turned off in the green mode, the camera turns on in the green mode next time.
• The green mode cannot be used when [Green Mode] is set to a function other than the green button
in the D menu.
40
Performing Shooting in the Scene Mode
1 Set the mode dial to T.
The mode switches to the T mode.
2 Press f.
The T menu appears.
3 Use abcd to select a scene.
Scene Mode
3
Cancel
OK
Shooting
HDR
Combines 3 images into a
single image delivering a
wider dynamic range image
The following scenes can be selected.
HDR
Interval Shooting
Handheld Night Snap
Interval Movie
Night Scene
High Speed Movie
Underwater
Surf & Snow
Underwater Movie
Kids
Landscape
Pet
Flower
Sport
Portrait
Fireworks
Digital SR
DOF Composite
4 Press e.
The scene is set.
41
Memo---------------------------------------------------------------------------------------------------------• The T menu is displayed only in the T mode.
• When the scene is set to [Interval Shooting] or [Interval Movie], shooting is performed at a fixed interval. You can set [Interval], [Number of Shots] ([Total Time] for [Interval Movie]), and [Start Delay].
• A description of the selected scene is displayed on the screen in Step 3. If you do not want to display
this description, set [Guide Display] to [Off] in the E menu.
Caution--------------------------------------------------------------------------------------------------------
3
Shooting
42
• The functions that can be set vary depending on the scene.
• When shooting with [HDR] or [DOF Composite], secure the camera on a tripod or similar device.
• [Interval Shooting] and [Interval Movie] cannot be selected during the GPS logging. (p.90)
Using Exposure Compensation
1 Select [EV Comp.] in the A menu, and press d.
The [EV Comp.] screen appears.
2 Use ab to select a compensation
EV Comp.
value.
The compensation value can be selected in
the range of ±2.0.
0.0
OK
3 Press e.
4 Press f.
Shooting
Cancel
3
The shooting screen reappears.
Caution-------------------------------------------------------------------------------------------------------• The exposure compensation is not available in the S mode.
43
Recording Movies
Movies can be directly recorded even when the mode dial is set to a mode
other than B.
1 Set [Movie Button] to [On] in the D menu.
Movie recording with the movie button is enabled.
3
2 Press the movie button.
Shooting
Recording starts.
The recording time is displayed while recording.
3 Press the movie button again.
Recording stops.
Memo---------------------------------------------------------------------------------------------------------• Regardless of the mode dial setting, when the movie recording has been started with the movie
button, [Recorded Pixels] and [Movie SR] are fixed to [FullHD 30fps] and [On], respectively.
• When the mode dial is set to B, use z to start the movie recording.
44
Caution--------------------------------------------------------------------------------------------------------
3
Shooting
• When [Movie Button] is set to [Off] in the D menu, turn the mode dial to B and use z to
start and end the movie recording.
• When the movie recording has been started with the movie button, use the movie button to end
the recording.
• The movie recording cannot be started with the movie button in the following cases.
• In [Underwater Movie], [Interval Shooting], [Interval Movie], [High Speed Movie], or [Pet] of the
T mode or in the V mode
• When [Face Detection] is set to [Smile] or [Assist+Smile] in the A menu
• When [Microphone] is set to [On] (default setting) in the B menu, camera operation sounds are
also recorded.
• If the internal temperature of the camera becomes high during recording, recording may be terminated.
• The flash cannot be used in the B mode.
• When the function of the movie button has been changed in [ADJ Button Setting 1] to [ADJ Button
Setting 5] of the D menu, use z to start recording. (p.82)
• You can record a movie continuously up to 4 GB or 25 minutes. Recording stops when the memory
card or internal memory becomes full. The maximum recording time per shooting depends on the
capacity of the memory card. (p.112) Shooting may stop even before the maximum recording time
is reached.
• The amount of time remaining is calculated based on the amount of memory available and may not
diminish at an even rate.
• For the memory cards with which proper operation has been confirmed for recording movies, refer
to p.113.
• The use of the battery with sufficient power or the optional AC adapter (K-AC166) is recommended.
45
Playing Back Movies
1 Press g.
An image is displayed in the single image display of playback mode.
2 Use cd to select a movie to play back.
The first frame of the movie is displayed as a still image.
3
3 Play back a movie.
The following operations are available.
Shooting
a
Plays back/Pauses a movie.
cd
Fast-reverses/Fast-forwards playback.
b
Stops playback.
4 (T)/5(W)
Adjusts the sound volume.
e
Switches the displayed information.
Memo---------------------------------------------------------------------------------------------------------• The sound volume at the start of movie playback can be set in [Playback Volume] of the E menu.
• In [Movie Edit] of the C menu, you can divide a movie file into multiple segments and add a title
image to a movie. (p.77)
46
Using the Camera as a Webcam
You can used the camera as a webcam when conducting video conferences,
etc. via the network.
The camera is compatible with the following web conferencing software.
• Zoom
• Skype
• Microsoft Teams
• Google Meet
• Cisco Webex
• Facebook Messenger
• The webcam function is compatible with the following OS.
• Windows® 11, Windows® 10
• macOS 14 Sonoma, macOS 13 Ventura, macOS 12 Monterey, macOS 11 Big Sur
Shooting
Caution--------------------------------------------------------------------------------------------------------
3
Installing the Camera
1 Select [USB Connection] in the E menu, and press d.
2 Select [UVC], and press e.
3 Open the battery/card cover of the
camera, and connect the USB cable to
the USB terminal.
The AF assist light turns on and the camera
enters the UVC mode.
4 Fix the camera on a tripod or similar
device.
5 Start the web conferencing software and select “PENTAX WG-8”
in the camera settings of the software.
6 To exit the UVC mode, turn the camera off.
47
Caution-------------------------------------------------------------------------------------------------------• The image quality in the UVC mode is fixed to [FullHD 30fps].
• During the UVC mode, nothing is displayed on the camera monitor.
• During the UVC mode, the microphone of the camera cannot be used.
• When mounting the camera on a tripod or similar device, use the optional Extension Adapter TE-2.
Memo----------------------------------------------------------------------------------------------------------
3
Shooting
• For the software settings, refer to the help, etc. of each software.
• You can change the angle of view by operating 4 (T)/5 (W) during the UVC mode.
• Even in the UVC mode, autofocus operates within the normal range (10 cm to Z). If you want autofocus to operate at a closer distance, press s (b) to switch to [1cm Macro].
• The UVC mode is retained even when the camera is turned off. To cancel the UVC mode, remove the
USB cable and set [USB Connection] to a mode other than [UVC] in the E menu.
Using the Ring Light Together---------------------------------------------------------------------------• When the mode dial is set to P during the UVC mode, the ring light turns on. To turn off the ring
light, set the mode dial to a mode other than P.
• The brightness and lighting position of the ring light can be changed in [Ring Light] of the A menu.
During the UVC mode, the ring light remains on regardless of the [LightningTime] setting.
• When the ring light is used, the continuous usage time of the webcam function is limited.
The estimated continuous usage time when the battery is fully charged is as follows.
[Ring Light] Setting
Continuous Usage Time
Off
Approx. 360 minutes
Brightness [1]
Approx. 200 minutes
Brightness [5]
Approx. 45 minutes
Brightness [9]
Approx. 20 minutes
The continuous usage time varies depending on the room temperature, etc.
• If the ring light is turned on for a long period of time, the camera becomes hot and is forced to be
turned off. In this case, handle the camera carefully. The camera is unavailable for use for a while
until it cools down.
48
Setting the Focus Mode
1 Press s (b) in the shooting mode.
The [Focus Mode] screen appears.
2 Use ab to select a setting.
Focus Mode
Standard
3
Standard
OK
Focuses on the subject at a distance of 50 cm or more from the camera when
z is pressed halfway.
When [Auto Macro] is set to [On] (default setting) in the A menu, focusing is also performed for subjects in the macro range.
Shooting
Cancel
Focuses on the subject at a distance of 10 to 60 cm from the camera.
Macro
Focuses on the subject at a distance of 1 to 30 cm from the camera.
1cm Macro
Focuses on the entire picture, from the front to the back.
Pan Focus
Fixes the focus distance at infinity. This is useful for shooting distant scenes.
Infinity
Focuses manually. (p.51)
MF
3 Press e.
The shooting screen reappears.
49
Memo---------------------------------------------------------------------------------------------------------• The focus mode can also be set in [Focus] of the A menu.
• The autofocus method for the still image mode can be set in [AF] of the A menu.
3
Multi
Measures the distances from 3 × 3 AF areas and focuses to the nearest
AF area. (Default setting)
Spot
Focuses to the center AF area.
Tracking
Keeps focusing while z is pressed halfway.
• Faces of people (up to 30 people) are automatically detected during autofocusing. The detection
method can be selected in [Face Detection] of the A menu.
Shooting
On
Detects human faces.
Smile
Automatically performs shooting when the subject smiles.
Assist
Flashes the ring light when a human face is detected. The position of
flashing ring light LED indicates where the face is detected within the
angle of view.
Assist+Smile
Flashes the ring light when a human face is detected and automatically
performs shooting when the subject smiles.
Off
Does not detect human faces.
• The AF assist light on the front of the camera lights as necessary during autofocusing. The AF assist
light can be set to [Off] in [Focus Assist] of the A menu.
50
Focusing Manually (Manual Focus)
If the camera fails to focus automatically, you can focus manually.
The manual focus enables shooting at a fixed distance.
1 Select [MF] in Step 2 on p.49, and press e.
The focus bar appears on the shooting screen.
2 Use ab to set a focus distance.
100
3
Shooting
When e is pressed and held, the center of
the screen is magnified. Pressing and holding
e again restores the normal display.
100
Memo---------------------------------------------------------------------------------------------------------• When changing the focus mode from [MF], change the mode in [Focus] of the A menu.
51
Setting the Exposure
Selecting a Metering Method
Set the metering method in [AE Metering] of the A menu.
Meters exposure in multiple areas of the frame.
Divide
Meters exposure with emphasis on the center.
3
Shooting
52
Center
Spot
Meters exposure within a narrow range.
Use this option when metering exposure in a part of an image or when the metering target subject is small.
Setting the ISO Sensitivity
1 Select [ISO Setting] in the A menu, and press d.
2 Use ab to select a setting.
1/4
Shooting
Focus
AF
Auto Macro
Focus Assist
AE Metering
ISO Setting
AUTO ISO Range
Cancel
AUTO
125
200
400
800
1600
3200
OK
The shooting screen reappears.
Shooting
3 Press e.
4 Press f.
3
Memo---------------------------------------------------------------------------------------------------------• The settings that can be selected vary depending on the capture mode. When the following scenes
are selected in the T mode, settings cannot be made for [ISO Setting].
• [Digital SR], [Interval Movie], [High Speed Movie]
• [HDR] (The setting is fixed to [AUTO].)
• When [ISO Setting] is set to [AUTO] or when [HDR] is selected in the T mode, the adjustment
range of [AUTO] can be set in [AUTO ISO Range] of the A menu. [AUTO ISO Range] cannot be set
in the U mode.
Caution-------------------------------------------------------------------------------------------------------• Images taken with a higher sensitivity may appear grainy.
• Depending on the ISO sensitivity setting, the setting of [D-Range Setting] of the A menu is disabled. (p.65)
53
Using the Flash
1 Press l (c) in the shooting mode.
The [Flash Mode] screen appears.
2 Use ab to select a setting.
Flash Mode
Auto
3
Shooting
Cancel
OK
Fires the flash according to conditions.
Auto
Does not fire the flash.
Flash Off
Always fires the flash.
Flash On
Auto+R. eye
Fires the flash according to conditions while reducing the red-eye phenomenon.
Forces the flash to fire while reducing the red-eye phenomenon.
On+Red-eye
Turns on the ring light around the lens. (p.55)
Ring Light
3 Press e.
The shooting screen reappears.
54
Memo---------------------------------------------------------------------------------------------------------• The flash mode can also be set in [Flash Mode] of the A menu.
• When [Underwater] is selected in the T mode, both an image with the flash used and an
image with the flash not used can be taken.
Caution-------------------------------------------------------------------------------------------------------• You cannot perform shooting while the flash is being charged.
• The flash cannot be used in the B mode.
Using the Ring Light
3
Ring Light
Shooting
Select [Ring Light] in Step 2 on p.54 and
press d to set the brightness of the ring light.
The settings for the ring light can be made in
[Ring Light] in the A menu.
5
Cancel
Select
[All], [Right], [Left], [High], [Low], [Off]
Brightness
[1] to [9]
LightningTime
[Always On], [Shutter 10s], [Shutter 20s], [Shutter 30s], [Shutter 60s]
OK
Caution-------------------------------------------------------------------------------------------------------• [Ring Light] cannot be selected in the following cases.
• In the S mode, T mode, or V mode
55
Setting the White Balance
Make adjustments to the white balance so that white subjects will appear
white under any kind of light.
1 Select [White Balance] of the A menu, and press d.
The [White Balance] screen appears.
3
2 Use ab to select a setting.
White Balance
Auto WB
Shooting
Cancel
Adjusts the white balance automatically.
Auto WB
Used when shooting in daylight under clear skies.
Daylight
Used when shooting in shade.
Shade
Used when shooting in daylight under cloudy skies.
Cloudy
Used with daylight fluorescent lighting.
Fl. DL Color
Used with neutral white fluorescent lighting.
Fl. DL White
Used with cool white fluorescent lighting.
Fl. Cool Wt.
Used with warm white fluorescent lighting.
Fl. Warm Wt.
56
OK
Used with incandescent lighting.
Tungsten
Used when the ring light of the camera is used.
Ring Light
Set the white balance manually. (p.57)
Manual WB
3 Press e.
4 Press f.
3
Caution--------------------------------------------------------------------------------------------------------
Shooting
The shooting screen reappears.
• The white balance may not be adjusted correctly for a subject that is mostly dark.
Setting the White Balance Manually
1 Select [Manual WB] in Step 2 on p.56.
2 Aim the camera at a white subject, such as a sheet of paper,
under the light for shooting.
3 Press the green button.
An image to be used for white balance adjustment is taken.
White Balance
Manual WB
Cancel
OK
4 Press e.
5 Press f.
The shooting screen reappears.
57
Setting the Drive Mode
You can set the drive mode by pressing w
(a) in the shooting mode.
The drive mode can also be set in [Drive Mode]
of the A menu.
Drive Mode
Off
Cancel
3
OK
Shooting
Shooting Using the Self-timer
1 Press w (a) in the shooting mode.
The [Drive Mode] screen appears.
2 Use ab to select a setting.
Releases the shutter about 10 seconds after z is pressed.
Self-Timer10s
Releases the shutter about 2 seconds after z is pressed.
Self-Timer 2s
3 Press e.
The shooting screen reappears.
4 Press z.
The AF assist light blinks during the countdown, and the shutter is released
after about 10 seconds or 2 seconds.
When z is pressed halfway during the countdown, the self-timer is canceled.
58
Shooting Continuously
1 Press w (a) in the shooting mode.
The [Drive Mode] screen appears.
2 Use ab to select a setting.
Performs continuous shooting while z is pressed.
Cont. Shoot
M-Cont
Performs continuous shooting while z is pressed, and saves last 16
or 25 still images taken for 2 seconds before the button is released as an
image of 5184 × 3888 pixels. (Memory retrospective continuous shooting)
S-Cont
Performs continuous shooting for 16 or 25 still images after z is fully
pressed, and saves them as an image of 5184 × 3888 pixels. (Streaming
continuous shooting)
3
Shooting
Burst Shoot
Fixes the recorded pixels and aspect ratio to [S] and [4:3], respectively, and
performs continuous shooting at high speed.
3 Press e.
The shooting screen reappears.
Caution-------------------------------------------------------------------------------------------------------• The following functions cannot be used.
• Flash
• [On(New)] for [Copyright Print] in the E menu
• [Cont. Shoot] cannot be selected in the following capture modes.
• S mode
• [Night Scene], [Underwater Movie], [Interval Shooting], or [Fireworks] in the T mode
• B mode
59
Memo---------------------------------------------------------------------------------------------------------• The focus setting and exposure value are fixed during continuous shooting.
• The maximum number of images that can be taken continuously varies depending on the [Recorded
Pixels] setting in the A menu.
• The continuous shooting setting is reset when the camera is turned off and on again.
• If you release z early for [M-Cont], the number of saved images may not reach 16 or 25.
• The images taken with [M-Cont] or [S-Cont] are displayed in 16 or 25 thumbnails in the single image
display of C mode. Press 4 (T) to display an image in the single image display, and cd to
display the previous or next image.
3
Shooting
Shooting Using the Remote Control Unit
You can perform shooting using the optional remote control unit.
1 Press w (a) in the shooting mode.
The [Drive Mode] screen appears.
2 Use ab to select a setting.
0-sec Remote Control
3-sec Remote Control
Releases the shutter immediately after the shutter release button on the
remote control unit is pressed.
Releases the shutter about 3 seconds after the shutter release button on the
remote control unit is pressed.
3 Press e.
The shooting screen reappears.
4 Point the remote control unit towards the remote control
receiver of the camera, and press the shutter release button.
Memo---------------------------------------------------------------------------------------------------------• The maximum operating distance of the remote control unit is about 4 m from the front of the camera
and about 2 m from the rear of the camera.
60
Shooting with Varied Exposure Values
Takes three images with different exposure settings of -1.0 EV, 0 EV, and +1.0
EV.
1 Press w (a) in the shooting mode.
The [Drive Mode] screen appears.
2 Use ab to select [A-Bracket], and press e.
The shooting screen reappears.
Three images are taken by pressing z once.
The three images are displayed side by side during Instant Review.
3
Shooting
3 Press z.
61
Configuring the Capture Settings
Image Capture Settings
Set the file format for still images in the A menu.
Recorded Pixels
[L], [M], [S], [XS], [VGA]
Aspect Ratio
[4:3], [3:2], [1:1]
Quality Level
[8], [9], [0]
3
Shooting
Caution-------------------------------------------------------------------------------------------------------• The settings that can be selected are limited depending on the capture mode.
Memo---------------------------------------------------------------------------------------------------------• The capture settings for the U mode can be made in [CALS Pixels] and [CALS Quality] of the
D menu.
Movie Capture Settings
Set the file format for movies in the B menu.
Recorded Pixels
Sets the number of recorded pixels.
[4K 30fps] (3840 × 2160)
[FullHD 30fps] (1920 × 1080)
[HD 60fps] (1280 × 720)
[HD 30fps] (1280 × 720)
HDR
Sets whether to perform the HDR recording.
Microphone
Sets whether to record sounds.
Wind Suppression
Reduces wind noise during recording.
Memo---------------------------------------------------------------------------------------------------------• For the reduction of blurring during recording movies, refer to “Reducing Blurring of Images” (p.65).
Caution-------------------------------------------------------------------------------------------------------• When [Recorded Pixels] is set to [4K 30fps] or [HD 60fps], [Movie SR+] of the B menu and [HDR]
are fixed to [Off].
• [Movie SR+] of the B menu and [HDR] cannot be set simultaneously.
62
Setting the Image Finishing Tone and Correction
Setting the Image Atmosphere (Image Tone)
You can control the finishing tone for taken images.
1 Select [Image Tone] in the A menu, and press d.
The [Image Tone] screen appears.
Bright
Increases the values of [Contrast], [Sharpness], and [Saturation] to take
sharp images.
Shooting
2 Use ab to select a setting.
3
Takes images with a natural tone close to the actual color.
Natural
Takes bright and gorgeous images with a deep tone of color.
Vibrant
Takes contrast-emphasized images like those taken with a reversal film.
Slide Film
Monochrome
Takes a black and white image.
Set [Tone Adjustment] in the A menu. (p.64)
3 Press e.
4 Press f.
The shooting screen reappears.
63
Setting the Sharpness, Saturation, Tone, and Contrast
The following settings can be made in the A menu.
3
Sharpness
[Soft], [Standard], or [Hard] can be selected.
Saturation
[Soft], [Standard], or [Hard] can be selected.
[Saturation] can be set only when [Image Tone] is set to [Monochrome] in the A
menu.
Tone Adjustment
[Blue], [Black & White], or [Sepia] can be selected.
[Tone Adjustment] can be set only when [Image Tone] is set to [Monochrome] in
the A menu.
Contrast
[Soft], [Standard], or [Hard] can be selected.
Shooting
Imprinting the Date on Still Images
The date can be imprinted at the bottom right of the image based on the
date set in the camera. The date imprinting can be set in [Date Imprint] of
the A menu.
Caution-------------------------------------------------------------------------------------------------------• The imprinted date cannot be deleted.
• The date cannot be imprinted in the following cases.
• During the shooting in [Underwater Movie] or [High Speed Movie] of the T mode.
• In the B mode
• When [Drive Mode] is set to [Burst Shoot], [M-Cont], or [S-Cont]
• When [UTC Data Imprint] of [Data Imprint] is set to [On] in the D menu, [Date Imprint] is fixed to
[Off] in the A menu. (p.93)
Taking Images with Clearer Details
Images with clearer details can be taken by image processing. Set in [IQ Enhancer] of the A menu.
Caution-------------------------------------------------------------------------------------------------------• [IQ Enhancer] is disabled in the following case.
• When [Drive Mode] is set to [Burst Shoot], [M-Cont], [S-Cont], or [A-Bracket]
64
Correcting a Range of Tones (D-Range Setting)
With [D-Range Setting] of the A menu, you can expand an image gradation
to make the bright and dark portions of an image clearly visible.
Highlight Cor.
Corrects the bright portions of the image.
Shadow Cor.
Corrects the dark portions of the image.
Caution--------------------------------------------------------------------------------------------------------
Reducing Blurring of Images
To automatically reduce blurring of images, set the following functions.
Still image mode
[Pix. Track SR] in the A menu
Movie mode
[Movie SR] or [Movie SR+] in the B menu
3
Shooting
• When the shooting location is too bright or too dark, the [D-Range Setting] setting may not be effective.
Memo---------------------------------------------------------------------------------------------------------• Setting [Movie SR+] to [On] achieves movies with less blurring.
Caution-------------------------------------------------------------------------------------------------------• [Movie SR] and [Movie SR+] are fixed to [Off] in the following case.
• When [Interval Movie] or [High Speed Movie] is selected in the T mode
• [Movie SR+] is fixed to [Off] in the following cases.
• When [Recorded Pixels] is set to [4K 30fps] or [HD 60fps]
• When [HDR] is set to [On] in the B menu
65
Playback Functions
Changing the Playback Method
Displaying Multiple Images
You can display multiple images in the thumbnail view.
1 Press 5 (W) in the single image
05/05/2024 10:00
LAST FILE
display of playback mode.
4
The images are displayed in 20 thumbnails.
Playback Functions
100-0630
1/60
F3.5
125
EV+0.5
The following operations are available.
abcd
Moves the selection frame.
5 (W)/4 (T) Switches between the 20-thumbnail display, the 81-thumbnail display, and the
folder (calendar) display.
Green button
Switches between the folder display and the calendar display.
i
Deletes the selected image. (p.70)
2 Press e.
The selected image is displayed in the single image display.
Memo---------------------------------------------------------------------------------------------------------• Images are played back in the order of file numbers automatically assigned to them.
66
Playing Back Images Continuously (Slideshow)
1 Select [Slideshow] in the C menu, and press d.
The [Slideshow] screen appears.
2 Set the image switching interval and screen effects.
Interval
Sets the image switching interval.
[Interval] cannot be set when [Screen Effect] is set to [Random].
Screen Effect
Sets the screen effects applied when images are switched.
Sound Effect
Sets the sound effects.
[Sound Effect] is fixed to [Off] when [Screen Effect] is set to [Random].
A slideshow starts.
When e is pressed, the slideshow pauses or resumes.
When any other button is pressed, the slideshow stops.
Playback Functions
3 Select [Start], and press e.
4
67
Displaying Rotated Images
You can change image rotation information.
1 Display an image in the single image display of playback mode.
2 Select [Rotation] in the C menu, and press d.
3 Select the rotation direction, and
Rotation
press e.
4
Playback Functions
Cancel
OK
Caution-------------------------------------------------------------------------------------------------------• Rotation direction cannot be changed when the write-protect switch on the memory card is locked
or for the following images.
• Movies
• Images taken with [M-Cont] or [S-Cont]
• Protected images
Auto Image Rotation--------------------------------------------------------------------------------------• When [Auto Image Rotation] is set to [On] in the C menu, the displayed image is rotated according to the camera’s orientation during the single image display. When [Auto Image Rotation] is set
to [Off] (default setting), the image display orientation is fixed regardless of the [Rotation] setting.
• Movies cannot be rotated.
• Images are not rotated in the following cases.
• During a slideshow
• While an AV device is connected to the camera
68
Connecting the Camera to an AV Device
Connect to an AV device, such as TVs, equipped with an HDMI® terminal to
display Live View images while shooting or to play back images.
Prepare a commercially available HDMI® cable that is suitable for the device
connected to the camera.
1 Turn the AV device and camera off.
2 Open the battery/card cover of the
camera, and connect the HDMI® cable
to the HDMI® micro output terminal.
4
on the AV device.
For details, refer to the operating manual for the AV device.
4 Turn the AV device and camera on.
Caution--------------------------------------------------------------------------------------------------------
Playback Functions
3 Connect the other end of the HDMI® cable to the input terminal
• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand
adhering to the camera, and avoid locations where dirt can enter the camera interior.
• While the camera is connected to an AV device, nothing is displayed on the camera monitor.
• The audio of the movie is output from the AV device. Adjust the volume on the AV device.
• Use an HDMI® cable with a length of 3 m or less (recommended product: CAC-HD14EU15BK manufactured by ELECOM). The RICOH HDMI cable HC-1 cannot be used.
Memo---------------------------------------------------------------------------------------------------------• If the camera is connected to an AV device in the playback mode, an image is displayed in the single
image display.
• When outputting images to an AV device with an HDMI® terminal, the maximum resolution supported by both the AV device and camera is automatically selected. If the AV device fails to play back
images properly, change the setting in [HDMI Out] of the E menu.
69
Organizing Files
Deleting Files
1 Press i in the single image display or multiple image display.
2 Select the deletion method, and press e.
Available deletion methods vary depending on the camera status when i
is pressed.
Single image display
4
[Delete One], [Delete Multi], or [Delete All] can be selected.
When [Delete Multi] is selected, select [Sel. Indiv.] or [Sel. Range].
Playback Functions
20-thumbnail display or [Sel. Indiv.] or [Sel. Range] can be selected.
81-thumbnail display
When [Delete All] is selected, proceed to Step 5.
3 Select the images to delete.
05/05/2024 10:00
100 /99999
Sel/Cancel
Delete
abcd
Moves the selection frame.
e
Selects/Deselects an image.
When [Sel. Range] is selected: Selects the starting or ending point for image selection range.
4 Press i.
The confirmation screen appears.
5 Select [Execute], and press e.
The selected images are deleted.
Memo---------------------------------------------------------------------------------------------------------• Protected images cannot be selected.
70
Restoring Deleted Files
You can restore the deleted files in [Recover File] of the C menu.
Caution-------------------------------------------------------------------------------------------------------• The images cannot be restored when the following operations have been performed after deleting
them.
• Turning the camera off
• Switching from the playback mode to the shooting mode
• Executing [Image Copy], [Resize], or [Cropping] of the C menu
• Executing [Format [Card]] or [Format [Internal M]] of the E menu
Copying Images
1 Insert a memory card.
2 Select [Image Copy] in the C menu, and press d.
3 Select the copy method, and press e.
[Internal M]>>>[Card] Copies all images in the internal memory to the memory card.
When the memory card space is insufficient, the images cannot be copied.
Playback Functions
Images can be copied between the internal memory and the memory card.
4
[Card]>>>[Internal M] Copies images in the memory card to the internal memory one by one after
confirming copying of each file.
The file names are automatically changed.
71
Protecting Images from Deletion
You can protect images to prevent them from being deleted accidentally.
1 Select [Protect] in the C menu, and press d.
2 Select the protection method.
Select the method from [1 File], [Sel. Multiple], [Select All], and [Cancel All].
When [1 File] is selected, use cd to display the previous/next image.
3 Press e.
4
When [Sel. Multiple] is selected, proceed to Step 4.
Playback Functions
4 Select [Sel. Indiv.] or [Sel. Range].
5 Select the images to protect.
05/05/2024 10:00
Sel/Cancel
100 /99999
Execute
abcd
Moves the selection frame.
e
Selects/Deselects an image.
When [Sel. Range] is selected: Selects the starting or ending point for image selection range.
6 Press the green button.
The selected images are protected or unprotected.
Memo---------------------------------------------------------------------------------------------------------• If you apply protection to the images that have already been protected, they are unprotected.
Caution-------------------------------------------------------------------------------------------------------• If [Format [Card]] or [Format [Internal M]] of the E menu is executed, protected images are also
deleted.
72
Copying Images to a Computer
Connect the camera to a computer using the provided USB cable.
1 Set [USB Connection] to [MSC] in the E menu.
2 Open the battery/card cover of the
camera, and connect the USB cable to
the USB terminal.
The camera is recognized as a device by the computer.
When a memory card is inserted, the files on the memory card are displayed.
When a memory card is not inserted, the files in the internal memory are
displayed.
4 Copy the captured images to the computer.
5 Disconnect the camera from the computer when the copy is
complete.
4
Playback Functions
3 Connect the USB cable to the USB port of the computer.
6 Remove the USB cable from the camera.
Caution-------------------------------------------------------------------------------------------------------• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand
adhering to the camera, and avoid locations where dirt can enter the camera interior.
• Do not remove the USB cable while copying images.
Memo---------------------------------------------------------------------------------------------------------• When the camera is connected to a computer and then turned off, the battery charging starts.
• Refer to “Operating Environment” (p.113) for system requirements to connect the camera to a computer.
73
Editing and Processing Images
You can edit and process taken images.
Caution-------------------------------------------------------------------------------------------------------• Only images taken with this camera can be edited and processed. Still images saved from movies
cannot be edited and processed.
• If you edit and process images repeatedly, image quality will deteriorate.
Changing the Image Size
4
Changing the Number of Recorded Pixels (Resize)
Playback Functions
1 Display an image in the single image display of playback mode.
2 Select [Resize] in the C menu, and press d.
The [Resize] screen appears.
3 Set [Recorded Pixels] and [Quality
Level] for the resized image.
The smaller size than the setting for shooting
can be selected.
Resize
Recorded Pixels
Quality Level
Cancel
4 Press e.
5 Select [Overwrite] or [Save as], and press e.
The image is saved.
74
OK
Cropping Images
You can crop a part of images and then save them.
1 Display an image in the single image display of playback mode.
2 Select [Cropping] in the C menu, and press d.
The [Cropping] screen appears.
3 Specify the range to crop.
Cropping
1280x960
4
4 (T)/5 (W)
Changes the cropping size.
abcd
Moves the cropping frame.
4 Press e.
The image is saved as a new image.
OK
Playback Functions
Cancel
75
Processing Images with Filters
You can process images with filters.
1 Display an image in the single image display of playback mode.
2 Select [Filter] in the C menu, and press d.
The [Filter] screen appears.
3 Use ab to select a filter, and press d.
4
Playback Functions
Small Face Filter
[5%], [7%], [10%]
Ink Rubbing Filter
[1] to [5]
Digital Filter
[B&W/Sepia], [Toy Camera], [Retro], [Color], [Extract Color], [Color Emphasis], [High Contrast], [Starburst], [Soft], [Fish-eye], [Miniature], [Brightness]
HDR Filter
—
When [HDR Filter] is selected, proceed to Step 5.
4 Use cd to specify a value.
For [Digital Filter], use ab to select a filter
type, and then use cd to specify a value.
Digital Filter
Toy Camera
Cancel
5 Press e.
6 Select [Overwrite] or [Save as], and press e.
The image is saved.
76
OK
Editing Movies
1 Select [Movie Edit] in the C menu, and press d.
The [Movie Edit] screen appears.
2 Use ab to select an editing method.
Save as Still Image
Saves the specified frame as a still image.
Divide Movies
Divides a movie into two files at the specified devision point and saves as
new files.
Adding title picture
Specifies the image to be used as the thumbnail for a movie.
4
For each editing method, refer to the following.
1 Select [Save as Still Image], and press e.
The movie playback screen appears.
2 Display the frame to save.
9998/9999
05/05/2024 10:00
You can play or pause the movie in the same
manner as when viewing a movie in the playback mode.
3 Press e.
100-0630
Playback Functions
Saving the Specified Frame as a Still Image
00´ 20˝
The selected frame is saved as a still image.
77
Dividing a Movie
1 Select [Divide Movies], and press e.
The movie playback screen appears.
2 Display the frame at which you want to divide the movie.
You can play or pause the movie in the same manner as when viewing a movie in the playback mode.
The dividing point can be specified in 30 frames increments.
3 Press e.
4
The confirmation screen appears.
Playback Functions
4 Select [Divide], and press e.
The movie is divided at the selected frame and saved as new movie files.
Caution-------------------------------------------------------------------------------------------------------• The movies with a recording time of less than 2 seconds cannot be divided.
Specifying the Image to Be Used as the Thumbnail for a Movie
1 Select [Adding title picture], and press e.
The image selection screen appears.
2 Use cd to select an image.
Select title picture
Cancel
OK
3 Press e.
4 Specify whether to insert the image at the beginning or at the
end of the movie, and press e.
The image is inserted at the beginning or end of the movie.
78
Memo---------------------------------------------------------------------------------------------------------• The inserted image is displayed for 3 seconds at the beginning or end of the movie.
• When the image is inserted at the beginning of the movie, it is displayed as the thumbnail for the
movie. When the image is inserted at the end of the movie, the thumbnail for the movie is not
changed.
Caution-------------------------------------------------------------------------------------------------------• When the recording time of the movie reaches 26 minutes with the title image inserted, the image
cannot be inserted.
Correcting Red Eyes in Images
You can correct red eyes in images taken with a flash.
The image is saved.
Caution--------------------------------------------------------------------------------------------------------
Playback Functions
1 Display an image in the single image display of playback mode.
2 Select [Red-eye Edit] in the C menu, and press d.
3 Select [Overwrite] or [Save as], and press e.
4
• The red eyes cannot be corrected for the following images.
• Images in which the camera cannot detect red eyes
• Movies
79
Changing the Settings
Saving Frequently Used Settings
Using the Mode Dial
You can assign frequently used shooting settings to the mode dial P and
Q so that you can easily recall the settings.
The following settings can be saved.
• Capture mode
• A/B menu settings (with exceptions)
• A part of D menu settings
5
Changing the Settings
Saving the Settings
1 Set the capture mode and all the necessary settings to save.
2 Select [Reg. USER] in the D menu, and press d.
3 Select [U1] or [U2], and press e.
The settings are saved.
Destination to save
current settings?
U1
U2
OK
Using the User Mode
1 Set the mode dial to P or Q in the shooting mode.
2 Change the settings as necessary.
Memo---------------------------------------------------------------------------------------------------------• The settings changed in Step 2 are not saved in the camera. If the mode dial is turned, the settings
are reset to the saved settings.
80
Exporting the Settings to a File
You can export the menu settings to a file and save it in a memory card.
The settings can be restored from the exported file. Also, the settings can be
copied to multiple cameras using the exported file.
You can export the settings in a memory card using [Write] and can import
the settings to the camera using [Read] in [Camera Settings File] of the E
menu.
Caution-------------------------------------------------------------------------------------------------------• The setting file is saved in the “SYSTEM” folder in the memory card with the file name “CAMERA.PRM”.
When [Write] is executed, the old file is overwritten.
• If the memory card is not available for recording, the setting file cannot be saved.
5
Changing the Settings
81
Customizing the Button Functions
Registering Functions to the Movie Button
You can change the settings for “ADJ. mode” of which functions can be easily
used by pressing the movie button.
Five functions selected from the following functions can be saved. (The
functions indicated with a square-bracketed item are the default settings
for the item.)
5
• Off
• EV Comp. [Setting1]
• Recorded Pixels [Setting2]
• Aspect Ratio [Setting3]
• ISO Setting [Setting4]
• White Balance [Setting5]
• Image Tone
• Quality Level
• AE Metering
• AF
• Face Detection
• Highlight Cor.
• Shadow Cor.
• Outdoor View
Changing the Settings
1 Select [ADJ Button Setting 1] to [ADJ Button Setting 5] in the D
menu, and press d.
2 Use ab to select a function, and
press e.
Customize
Reg. USER
CALS Pixels
CALS Quality
ADJ Button Setting 1
ADJ Button Setting 2
ADJ Button Setting 3
ADJ Button Setting 4
Cancel
1/4
Off
EV Comp.
Recorded Pixels
Aspect Ratio
ISO Setting
White Balance
Image Tone
OK
3 Set [Movie Button] to [Off] in the D menu.
The ADJ. mode is enabled.
Memo---------------------------------------------------------------------------------------------------------• Refer to “Using the ADJ. Mode” (p.20) for how to use the ADJ. mode.
82
Changing the Functions of the Green Button
You can change the functions activated when the green button is pressed.
The following functions can be saved.
Still images
• Green Mode (default setting)
• EV Comp.
• Recorded Pixels
• Quality Level
• Aspect Ratio
• White Balance
• ISO Setting
• AF
• Face Detection
• Auto Macro
• AE Metering
• Highlight Cor.
• Shadow Cor.
• Sharpness
• Saturation/Tone Adjustment
• Contrast
• Outdoor View
5
Movies
• EV Comp.
• Sharpness
• Saturation/Tone Adjustment
• Contrast
• Outdoor View
1 Select [Green Mode] in the D menu, and press d.
2 Use ab to select a function, and
press e.
The green button function is changed.
Customize
ADJ Button Setting 5
Green Button
START DATE/TIME
Show folder at startup
Shut-down Screen
Confirm. Time
Quick Zoom
Cancel
Changing the Settings
• Green Mode (default setting)
• Movie SR
• Movie SR+
• White Balance
• AF
• Face Detection
2/4
Green Mode
EV Comp.
Recorded Pixels
Quality Level
Aspect Ratio
White Balance
ISO Setting
OK
Memo---------------------------------------------------------------------------------------------------------• You can display the current green button function when the camera is turned on. Set [Start-up
Screen] to [Start-up screen with operation guide] in the C menu. (p.84)
• The function set to the green button is enabled in the shooting mode only.
83
Display and Sound Settings
Setting the Start-up Screen
The screen display when the camera is turned on can be set in [Start-up
Screen] of the C menu.
5
Start-up screen with
operation guide
Displays the capture mode.
PENTAX
Displays the PENTAX logo.
Photographs
Displays the selected captured image.
Off
Displays nothing.
Changing the Settings
Setting the Information Displayed when the Camera Is
Turned On/Off
You can set the information displayed when the camera is turned on and off
in the D menu.
START DATE/TIME
Displays the current date and time until the camera is operated after it is turned on.
Show folder at startup
Displays the name of the current folder and the number of images in the folder
until the camera is operated after it is turned on.
Shut-down Screen
Displays the PENTAX logo and the number of images captured on the day except for
deleted images when the camera is turned off.
Setting the Live View Display
You can set the Live View display in the D menu.
Grid Guide Display Op.
Select the grid style from [9 Divide] or [16 Divide].
Level Setting
Select the level display from [Off], [Level + Shift], or [Level].
Memo---------------------------------------------------------------------------------------------------------• The current tilt can be saved as a reference tilt by executing [Calibrate Level] in the D menu.
84
Setting the Brightness of the Monitor
You can adjust the brightness of the monitor in the E menu.
LCD Brightness
Sets the brightness of the monitor.
Outdoor View
Adjusts the brightness of the monitor when the monitor display is difficult to see
during outdoor shooting or in other situations.
Caution-------------------------------------------------------------------------------------------------------• The [LCD Brightness] setting cannot be changed when [Outdoor View] is set.
Setting the Lamp
You can set whether to turn the power button lamp on when the power is
turned on in [Power Button Lamp] of the E menu.
You can set the sound volume in the E menu.
Operation Volume
Sets the sound volume when buttons are operated.
Playback Volume
Sets the sound volume during playback.
Sound
Sets the sound volume for [Startup Sound], [Shutter Sound], [Operation Sound],
and [Self-timer Sound].
Changing the Settings
Setting the Sound Volume
5
85
Power Saving Settings
Automatically Turning the Power Off
The camera turns off automatically if no operations are made for a certain
period of time. Set the time until the the camera is turned off in [Auto Power
Off ] of the E menu.
Memo----------------------------------------------------------------------------------------------------------
5
• [Auto Power Off] is not available in the following cases.
• During shooting in the B mode or in [Interval Shooting] of the T mode
• During movie playback or slideshow
• During data processing
• While the camera is connected to a computer
• During FlashAir connection
Changing the Settings
Dimming the Display
The camera dims or turns off the display automatically if no operations are
performed during the set time. The following settings can be set in the E
menu.
Power Saving
Dims the display automatically if no operations are performed during the set time
to suppress battery drain.
Select the time until the display is dimmed from [5sec.], [15sec.], [30sec.], [1min.],
and [2min.].
Monitor Auto off Delay
Turns the monitor off automatically if no operations are performed during the set
time.
Select the time until the the monitor is turned off from [1min.], [5min.], and
[30min.].
If the camera is operated, the original brightness and display are restored.
86
Memo---------------------------------------------------------------------------------------------------------• [Power Saving] is not available in the following cases.
• During shooting in the B mode or in [Interval Shooting] of the T mode
• In the V mode
• In the C mode
• While a menu is displayed
• While the AC adapter is used
• [Monitor Auto off Delay] is not available in the following cases.
• During shooting in [Interval Shooting] of the T mode
• During movie playback or slideshow
• While the camera is connected to a computer
5
Changing the Settings
87
Setting the GPS
The camera can acquire information from GPS satellites using the built-in
GPS function.
Caution--------------------------------------------------------------------------------------------------------
5
Changing the Settings
88
• After the GPS function is turned on, the camera periodically acquires GPS information even when the
camera is turned off, which drains the battery.
• Local geographic conditions such as places where radio waves are blocked or reflected may prevent or
delay the acquisition of GPS information.
• The positions of GPS satellites are continuously changing and this may prevent or delay the acquisition of GPS information.
• The presence of devices transmitting frequencies close to those of GPS satellites or devices generating
a strong magnetic field may interfere with the acquisition of GPS information or deteriorate the GPS
information precision.
• Note that the camera may take a while to acquire the GPS information if it has not been used for
an extended period or has been moved a great distance from where the GPS information was last
acquired.
• The presence of devices generating a strong magnetic field or devices blocking magnetic fields may
interfere with the acquisition of correct direction information.
• The GPS function may not work near a broadcast tower, etc. and in a place where strong static electricity is generated.
• The use of GPS, the collection of location information, etc. may be regulated depending on the country and region. When bringing the camera to a foreign country, check with your embassy or travel
agency beforehand if there are restrictions on bringing in the camera with the GPS function, logging
GPS information, etc.
Displaying the GPS Information
You can record the location information in images using the GPS function.
Set in [GPS] of the D menu or press and hold x (d) to turn the GPS function on and off. The GPS information is acquired every one second in the
shooting mode.
3 4
1 2
The acquired GPS information can be
100
checked in “Detailed information display” in
128° ESE
the shooting mode (p.18).
5
6
7
8
E:139°
N:35°
X 3 (4)
3d
1 Electronic compass information (azimuth)
3 GPS positioning status
4 GPS lock
5 Longitude
6 Latitude
7 Number of GPS satellites used (Number of acquired visible GPS satellites)
8 Positioning quality
[no fix]: Positioning is not possible.
[2d]: The GSA positioning mode in the NMEA-0183 format is “2d”.
[3d]: The GSA positioning mode in the NMEA-0183 format is “3d”.
[Diff]: The GGA quality in the NMEA-0183 format is “DGPS”.
5
Changing the Settings
2 Electronic compass direction
89
Memo---------------------------------------------------------------------------------------------------------• The standard of GPS information displayed on the monitor can be set in [GPS Disp Mode] of the D
menu.
LAT/LON
Displays the latitude and longitude.
UTM
Displays the Universal Transverse Mercator (UTM) coordinates.
MGRS
Displays the Military Grid Reference System (MGRS) coordinates used as military information.
• The details of the location information recorded in images can be checked in “Detailed information
display” in the playback mode (p.18).
• Set [GPS Lock] to [On] in the D menu to enable the function to protect the acquired GPS information. The GPS information is protected when d is pressed on the shooting screen. The information is
unprotected when d is pressed again.
5
Automatically Adjusting the Date and Time Settings
Changing the Settings
The camera date and time settings can be adjusted based on the GPS information by setting [GPS Time Adjustment] to [On] in the D menu.
Recording the Camera Route
You can record the camera route using the GPS information.
1 Select [GPS Log] in the D menu, and press d.
The [GPS Log] screen appears.
2 Select [Record log], and press e.
GPS Log
Record log
Save log data
Discard log data
OK
90
3 Set [Logging Interval] and [Logging
Record log
Duration].
Start
Logging Interval
Logging Duration
10sec.
1
Exit
Logging Interval
Select from [1sec.] to [60sec.].
Logging Duration
Select from [1] hour to [24] hours.
4 Select [Start], and press e.
GPS logging starts.
Select [Stop] to stop the GPS logging.
When the set logging time elapses, the GPS logging stops.
• If you attempt to perform shooting with [Interval Shooting] or [Interval Movie] of the T mode
during the GPS logging, a warning message appears and shooting does not start.
• The logging interval may fluctuate in the following cases.
• When the camera is being turned on or off
• When the information of a new satellite is being acquired
• The time that can be set in [Logging Duration] varies depending on the [Logging Interval] setting. The
data may be acquired about 1 minute longer than the time set in [Logging Duration].
Changing the Settings
Caution--------------------------------------------------------------------------------------------------------
5
91
Saving Logs
You can save the recorded logs to the memory card as a file.
1 Select [Save log data] on the screen in Step 2 on p.90, and
press d.
2 Select [NMEA] or [KML], and press e.
The log file is saved in the “GPSLOG” folder in the memory card with the file
name composed of the serial number 001 to 999 and the month and day.
(Example: 001_0505)
Memo----------------------------------------------------------------------------------------------------------
5
Changing the Settings
92
• You can check the log file by using a software supporting the file on a computer.
• When deleting the log file, select [Discard log data] on the screen in Step 2. The log file cannot be
deleted with [Format [Card]] in the E menu.
Caution-------------------------------------------------------------------------------------------------------• If the memory card is not available for recording, the log file cannot be saved.
• When the GPS information has not been acquired, the log file is not saved.
Setting the Direction Information
You can set the direction information displayed on the shooting screen in
the D menu.
Compass Heading
Sets the displayed information.
Compass Calibration
Executes the adjustment of the compass.
Hold the camera with one hand and move it slowly like drawing the figure 8. When
the adjustment is completed, a beep sounds.
Declination
Select from [TRUE] and [MAG].
When the GPS information has not been acquired, the information for [TRUE] is
not displayed.
Imprinting the GPS Information
The acquired GPS information can be imprinted at the bottom right of the
image. Set in [Data Imprint] of the D menu.
GPS Data Imprint
Sets the standard of GPS information to imprint.
UTC Data Imprint
Imprints the Universal Coordinated Time.
[Date Imprint] of the A menu is disabled.
Heading Data Imprint
Imprints the direction information.
Caution-------------------------------------------------------------------------------------------------------• The imprinted GPS information cannot be deleted.
• The GPS information cannot be imprinted in the following cases.
• During the shooting in [Underwater Movie] or [High Speed Movie] of the T mode.
• In the B mode
• When [Drive Mode] is set to [Burst Shoot], [M-Cont], or [S-Cont]
5
Changing the Settings
93
File Management Settings
Specifying the Folder/File Settings
By default, folders and files are automatically named as follows.
Folder Name
100PENTX to 999PENTX
File Name
IMGP0001.JPG to IMGP9999.JPG
When the file number exceeds IMGP9999, the next folder is created and the
file number becomes IMGP0001. If the file number exceeds IMGP9999 when
the folder number is 999, no more files can be stored on the memory card
currently inserted.
The folder and file names can be changed.
5
New Folder Options
Changing the Settings
When images are captured with this camera, a folder is automatically created and the captured images are stored in it. Each folder name consists of a
sequential number from 100 to 999 and a string of 5 characters.
The character string in the folder name can be changed.
1 Select [New folder options] in the E menu, and press d.
2 Use ab to select a setting.
Standard
100PENTX to 999PENTX
Date
Assigns four digits of the month and day of the shooting date after the folder
number.
The month and day appear according to the date format set in [Date Adjustment]
of the E menu.
Example) 101_0125: Images taken on January 25th
Custom
Assigns a freely defined string of five characters after the folder number.
(Default: PENTX)
Example) 101PENTX
When [Standard] or [Date] is selected, proceed to Step 6.
94
3 Select [Custom], and press d.
The text-entry screen appears.
4 Enter a folder name.
Up to five single-byte alphanumeric characters can be entered.
Text entry cursor
PENTX
Q 㹕 E
A
Switch character type
R
T
Y
U
I
O
S
D
F
G
H
J
Z
X
C
V
B
N M
123
K
P
L
_
Delete one character
End entry
Finish
abcd
Moves the text selection cursor (yellow frame).
e
Enters a character selected with the text selection cursor.
and press e.
6 Select [Execute], and press e.
Memo---------------------------------------------------------------------------------------------------------• A folder with a new number is created when the next shooting is performed after the folder name
is changed.
Changing the Settings
5 After entering the text, move the text selection cursor to 1,
5
Caution-------------------------------------------------------------------------------------------------------• The maximum folder number is 999. If the folder name is changed after the folder number reaches 999, you cannot capture new images. Also, you cannot capture new images when the file name
number reaches 9999.
95
File Name
The string of characters “IMGP” is used as the file name prefix by default.
You can change this to any string of characters.
1 Select [File name] in the E menu, and press d.
2 Select [Custom], and press d.
3 Select a character to enter.
Uppercase alphanumeric characters and “_” can be entered.
Text entry cursor
IMGP
Q 㹕 E
5
A
Changing the Settings
Switch character type
R
T
Y
U
I
O
S
D
F
G
H
J
Z
X
C
V
B
N M
123
Cancel
K
P
L
_
Delete one character
End entry
Finish
abcd
Moves the text selection cursor (yellow frame).
e
Enters a character selected with the text selection cursor.
4 After entering the text, move the text selection cursor to 1,
and press e.
File Sequence No.
In [File Sequence No.] of the E menu, you can set whether to continue the
sequential numbering for file names even when memory cards are replaced.
96
On
Continues the sequential numbering for file names even after memory cards are replaced.
Off
Resets the numbering for file names after memory cards are replaced.
Reset File Number
If [Reset File Number] of the E menu is executed, a folder with a new number is created and file number starts from 0001.
Memo---------------------------------------------------------------------------------------------------------• When a memory card is not inserted, the file number in the internal memory is reset.
Setting the Copyright Information
You can set the copyright information embedded in the Exif data.
The text-entry screen appears.
4 Enter the copyright holder.
Up to 32 single-byte alphanumeric characters and symbols can be entered.
Text entry cursor
q 㹵 e
a
Switch character type
r
t
y
u
i
o
s
d
f
g
h
j
k
z
x
c
v
b
n m
p
l
5
Changing the Settings
1 Select [Embed Info] in the E menu, and press d.
2 Select [On] or [Off], and press e.
3 Select [Copyright Info], and press d.
Delete one character
End entry
123
Finish
abcd
Moves the text selection cursor (yellow frame).
e
Enters a character selected with the text selection cursor.
5 After entering the text, move the text selection cursor to 1,
and press e.
The E menu reappears.
The first 11 characters of the entered copyright holder are displayed.
Memo---------------------------------------------------------------------------------------------------------• You can check the copyright information in “Detailed information display” in the playback mode
(p.18).
97
Imprinting the Copyright Information
The copyright information can be imprinted at the bottom of the image. Set
in the E menu.
Copyright Print
Select from [On(OVR)], [On(New)], and [Off].
Copyright Position
Select from [Left], [Middle], and [Right].
Copyright Font Size
Select from [Large], [Middle], and [Small].
Copyright Color
Select from [Orange], [White], [Black], [Red], [Blue], [Green], and [Yellow].
Caution--------------------------------------------------------------------------------------------------------
5
Changing the Settings
98
• The imprinted copyright information cannot be deleted.
• The copyright information cannot be imprinted in the following cases.
• During the shooting in [Underwater Movie] or [High Speed Movie] of the T mode.
• In the B mode
• When [Drive Mode] is set to [Burst Shoot], [M-Cont], or [S-Cont]
• When [Copyright Info] is not set in the E menu
• When [Copyright Font Size] is set to [Large] or [Middle], a part of the copyright information may
not be imprinted.
Saving the Local Date and Time of the Specified City
The date and time set in “Initial Settings” (p.35) serve as the date and time
of your present location and are reflected in the shooting date and time for
images.
Setting the destination to a location other than your present location enables you to save images time-stamped with the local date and time.
1 Select [World Time] in the E menu, and press d.
The [World Time] screen appears.
2 Select [Destination] in [Select Time].
Select [Hometown] to reset the date and
time to the ones of your present location.
World Time
Select Time
Destination
New York
Hometown
New York
Destination
Hometown
10：00
DST OFF
10：00
OK
3 Press d at [Destination], and set the daylight saving time.
If the daylight saving time is applied to the city to set, turn [DST] on.
4 Press d at the city name row, and
select the destination city.
The destination city can be selected from 75
cities.
5 Press e.
Destination
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Cancel
10：00
00：00
Changing the Settings
Cancel
5
OK
Memo---------------------------------------------------------------------------------------------------------• Even if [Reset] of the E menu is executed, the [Hometown] and [Destination] settings are not reset.
99
Appendix
Attaching Optional Accessories
Wide Conversion Lens
If the wide conversion lens (DW-5) is attached to the camera, you can perform shooting with the 0.8x lens magnification (35 mm equivalent focal
length: 22 mm (wide angle)).
When using the wide conversion lens, set [Lens Adapter On] to [WIDE] in
the D menu. Refer to the User’s Manual provided with the lens for details.
Memo----------------------------------------------------------------------------------------------------------
6
Appendix
100
• A commercially available 37 mm diameter filter can be attached to the lens. This filter is effective to
protect the camera from scratches and condensation.
• When [Lens Adapter On] is set to [WIDE] in the D menu, this setting information is recorded in
the Exif data.
Caution-------------------------------------------------------------------------------------------------------• When [Lens Adapter On] is set to [WIDE] in the D menu, the functions that can be set are restricted.
AC Adapter
If you intend to use the camera continuously for a long period, the use of the
AC adapter (K‑AC166) is recommended.
1 Make sure that the camera is turned off, and open the battery/
card cover.
2 Remove the battery.
3 Connect the USB cable (Type-C) of the
AC adapter to the USB terminal of the
camera.
4 Connect the AC plug cord
6
Appendix
to the AC adapter, and
plug the cord into the
power outlet.
5 Turn the camera on.
Caution-------------------------------------------------------------------------------------------------------• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand
adhering to the camera, and avoid locations where dirt can enter the camera interior.
• Securely connect the power plug and AC plug cord.
• When the camera is not used, unplug the AC adapter from the power outlet and disconnect it from
the camera.
• If the AC adapter is disconnected from the camera or the power plug is unplugged from the power
outlet during use of the camera, the data may be lost.
• Do not move the camera by holding the AC adapter cable while the AC adapter is used.
• The AC adapter may not be usable depending on the country and region.
101
Troubleshooting
Power Supply
Problem
The camera does not
turn on.
6
Appendix
102
Cause
Solution
Page
The battery is not inserted.
Charge the battery and correctly
p.33
insert it into the camera.
The battery is exhausted.
The battery is not inserted in the
correct orientation.
The battery is incompatible.
Use the battery DB-110 exclusively
—
developed for this camera.
The AC adapter is not correctly Connect the AC adapter correctly.
p.101
connected.
The camera turns off The [Auto Power Off] function Turn the camera back on.
p.35
during use.
has been activated because the
camera was not operated for a
certain period of time.
The battery is exhausted.
Charge the battery.
p.33
The camera does not The camera is malfunctioning. Take the battery out and insert
p.31
turn off.
it again.
Use the battery DB-110 exclusively
—
The low battery indica- The battery is incompatible.
developed for this camera.
tor is displayed or the
camera turns off even
when a fully charged
battery is installed.
The battery cannot be The battery has reached the end Replace the battery with a new one.
—
charged.
of its service life.
The battery is hot.
Let the battery cool down to ambient
—
temperature.
The battery is quickly Ambient temperature is very
—
—
exhausted.
high or very low.
Shooting
Problem
Cause
Solution
Page
6
Appendix
Shooting cannot be
The battery is exhausted.
Charge the battery.
p.33
performed by pressing The camera is turned off or not in Turn the camera on or press z p.35
z.
the shooting mode.
to switch the camera to the shooting
mode.
The memory card is not
Perform [Format [Card]] of the
p.37
formatted.
E menu.
The memory card is full.
Insert a new card, or delete
p.70
unwanted files.
The memory card has reached Insert a new memory card.
—
end of its service life.
The memory card is locked.
Unlock the card.
—
The memory card contacts
Clean with soft, dry cloth.
—
are dirty.
Images cannot be
Confirmation time is too short. Change the setting of [Confirm.
p.38
checked after shooting.
Time] in the D menu.
The monitor is blank. The monitor brightness is dark. Adjust the brightness of the monitor p.85
in the E menu.
The monitor is off.
Press e to turn the monitor on. p.18
An AV device is connected to
Remove the cable from the camera. p.69
the camera.
The camera is unable The lens is dirty.
Clean with soft, dry cloth.
—
to focus in autofocus The subject is not at center
Lock the focus for shooting.
—
mode.
of frame.
The subject is not suitable for
Lock the focus or set the focus mode p.51
autofocus.
to [MF] for shooting.
The subject is too close.
Use [Macro] for shooting or move
p.49
away from the subject.
Images are blurred.
The camera was moved when Hold the camera with your elbows
—
z is pressed.
pressed against your body, or use
a tripod.
When shooting in a dark place, Use a flash, or set [ISO Setting] to a p.54
taken images become easily
high ISO sensitivity.
p.52
blurred.
The flash does not
A function preventing flash
Check the settings and mode.
—
discharge.
operation is selected.
The flash is not
The battery is exhausted.
Charge the battery.
p.33
charged.
103
Problem
6
Appendix
104
Cause
Solution
Page
Images are too bright. Flash output is not appropriate. Move away from the subject
—
or use a different light source.
The monitor brightness is not
Adjust the brightness of the monitor p.85
appropriate.
in the E menu.
Images are too dark. The monitor brightness is not
Adjust the brightness of the monitor p.85
appropriate.
in the E menu.
The exposure compensation is Change the exposure compensation p.43
set to a negative value.
value.
The colors of images The camera is unable to adjust Include a white object with the sub- p.56
are unnatural.
white balance for shooting con- ject or select the settings other than
ditions using auto white balance. [Auto WB] for [White Balance].
The monitor brightness Ambient lighting is poor or dif- This is normal and does not indicate
—
changes during
fers from that used for autofocus. a malfunction.
autofocus.
Electronic level indica- Electronic level indicators are
Check the setting of [Level Setting] p.84
tors are not displayed. hidden.
in the D menu.
—
The image is not level The camera was moving during Do not move the camera during
although level indicator shooting because you were on shooting.
a moving object or due to other
showed that the
causes.
camera was level.
The subject is not level.
Check the subject.
—
Playback/Deletion
Problem
Cause
Solution
Page
6
Appendix
Shooting information is Information display is set to “No Press e to switch the information p.18
not displayed.
information display”.
displayed on the screen.
Images cannot be
The AV device is not correctly
Connect the cable correctly.
p.69
played back.
connected with the camera.
Images are not
displayed on the
monitor.
Images are not
The cable is not correctly
Connect the cable correctly.
p.69
displayed on an AV
connected.
device.
The input setting of the AV
Check the AV device settings.
—
device is incorrect.
The images on the
The inserted memory card is not Insert a memory card formatted with p.37
[Format [Card]] of the E menu in
memory card cannot be formatted with this camera.
this camera.
played back.
Images are not
The memory card contacts
Clean with soft, dry cloth.
—
displayed on the
are dirty.
monitor.
—
The card is malfunctioning.
There is not problem with the
camera if images in another memory
card can be played back with this
camera. Do not use a memory card
that has a problem.
The monitor turned off. The battery is exhausted.
Charge the battery.
p.33
The [Auto Power Off] function Turn the camera back on.
p.35
has been activated because the
camera was not operated for a
certain period of time.
File(s) cannot be
[Protect] is set for the image(s). Cancel the protection with [Protect] p.72
deleted.
of the C menu.
The memory card is locked.
Unlock the card.
—
The memory card
The memory card is locked.
Unlock the card.
—
cannot be formatted.
105
Others
Problem
Cause
Solution
The memory card
cannot be inserted.
Camera controls have
no effect.
The card is not in the correct
orientation.
The battery is exhausted.
The camera is malfunctioning.
Insert the memory card in the
correct orientation.
Charge the battery.
Turn the camera back on.
Take the battery out and insert
it again.
When the AC adapter is used,
reconnect it.
Set date and time correctly in the
E menu.
If the battery is removed for more
than about five days, the date
setting will be lost.
Set date and time in the E menu.
Date is not set correctly. Date and time are not set
correctly.
The date setting has
The battery was removed.
been reset.
6
Appendix
106
Page
p.31
p.33
p.35
p.31
p.36
p.36
Error Messages
Error Message
Description
Insufficient Memory
6
Appendix
The memory is full and no more files can be saved. Insert a new memory card
or delete unwanted files. (p.70)
No image
There are no files that can be played back.
Unmatched File
You are trying to play back a file in a format not supported by this camera.
You may be able to play it back on a computer.
Memory card error
The memory card has a problem, and shooting and playback are impossible.
You may be able to play back files on a computer.
Format card.
The memory card you have inserted is unformatted or has been previously
used on another device. Use the card after formatting it with this camera.
(p.37)
Card is locked
The write-protect switch on the memory card you have inserted is locked.
Files cannot be stored.
You are trying to record a movie when the internal memory is set as the save
destination and [Recorded Pixels] is set to [4K 30fps] in the B menu.
Change the [Recorded Pixels] setting or insert a memory card. (p.62)
Card Error
A memory card not compatible with this camera is inserted.
Set date.
The date and time are not set. Set the date and time. (p.36)
Insufficient memory.
Some files cannot be copied with [Image Copy] of the C menu because
Continue?
the memory card space is insufficient. Use another memory card or delete
unwanted files.
The file selected for deletion You are trying to delete a protected file. Cancel the protection. (p.72)
is protected.
Format internal memory.
Format the internal memory. (p.37)
107
Main Specifications
Camera
Lens
Zoom Magnification
6
Focal Length
35 mm Equivalent Focal
Length
Maximum Aperture
Optical Zoom
Digital Zoom
Intelligent Zoom
Appendix
Motion Blur Still Image
Reduction
Movie
Focus
Type
Focus Range
(from lens face)
Effective Pixels
Image Sensor
Recorded
Still Image
Pixels
Movie
Sensitivity (standard output)
White Balance
Monitor
108
Type
Adjustment
PENTAX lens, 11 elements in 9 groups (5 aspherical lens elements)
5 to 25 mm
Approx. 28 to 140 mm
F3.5 (W) to F5.5 (T)
5x
Approx. 8.1x
10M: Approx. 7x
640: Approx. 40.5x (zoom magnification obtained together with
the optical zoom)
Pixel Track SR
High-sensitivity shake reduction mode (Digital SR)
Movie shake reduction mode (Movie SR, Movie SR+)
9-point AF, Spot AF, Auto tracking AF
Standard: 0.5 m (1.64 ft) to Z (entire zoom range)
Macro: 0.1 to 0.6 m (0.33 to 1.97 ft) (entire zoom range)
1cm Macro: 0.01 to 0.3 m (0.03 to 0.98 ft) (intermediate portion
of the zoom range)
Switchable to Infinity-landscape, Pan Focus, and Manual Focus
Approx. 20 megapixels
1/2.3" CMOS
Size: L (20M), M (10M), S (5M), XS (3M), 2M, 1M, VGA
• When the aspect ratio is set to 4:3, the sizes in parentheses
are used.
• 2M and 1M are available only in the U mode.
Aspect ratio: 4:3, 3:2, 1:1
• In the U mode, the aspect ratio is fixed to 4:3.
4K, 1920, 1280
Auto, Manual (ISO 125 to 6400)
Auto, Daylight, Shade, Cloudy, Tungsten, Fluorescent (D: Daylight
color, N: Daylight white, W: Cool white , L: Warm white), Ring
Light, Manual
3.0" LCD, Approx. 1040 K dots, With AR coating (cover only)
Brightness, Outdoor view setting: ±2 steps
Exposure
Control
Metering System
6
Appendix
Multi-segment metering, Center-weighted metering, Spot
metering
Exposure Compensation ±2 EV (1/3 EV steps)
Capture Mode
Auto Picture, Program, HDR, Handheld Night Snap, Movie, High
Speed Movie, Digital Microscope, Landscape, Flower, Portrait,
Underwater, Underwater Movie, Interval Shooting, Interval Movie,
Surf & Snow, Kids, Pet, Sport, Night Scene, Fireworks, Digital SR,
CALS, Green, DOF Composite
Face Detection
Maximum detectable faces: 30
Smile capture, Self-portrait assist, Self-portrait assist + Smile
capture, Blink detection
Pet Detection
1 pet (Auto)
Playback Mode
Slideshow, Rotation, Small Face Filter, Ink Rubbing Filter, Digital
Filter (B&W/Sepia, Toy Camera, Retro, Color, Extract Color, Color
Emphasis, High Contrast, Starburst, Soft, Fish-eye, Brightness,
Miniature), HDR Filter, Movie Edit, Red-eye Edit, Resize, Cropping,
Image Copy, Protect, Start-up Screen, Recover File, Auto Image
Rotation
Shutter Speed
1/4000 to 1/4 seconds (with the mechanical shutter and electronic shutter used together)
Up to 4 seconds (in the Night Scene mode)
Built-in
Mode
Auto flash, Flash off, Flash on, Auto flash + Red-eye edit, Flash on
Flash
+ Red-eye edit
Flash Effective Range
Wide angle: Approx. 0.2 to 5.5 m (0.66 to 18 ft) (when the ISO
sensitivity is set to Auto)
Telephoto: Approx. 0.2 to 3.5 m (0.66 to 11 ft) (when the ISO
sensitivity is set to Auto)
Drive Mode
Single-frame shooting, Self-timer, Continuous shooting, Burst
shooting, M-continuous shooting, S-continuous shooting, Remote
control, Auto bracketing
Storage Media
Internal memory (approx. 27 MB), SD/SDHC/SDXC memory card
FlashAir™ card
Power Supply
Rechargeable battery DB-110, AC adapter kit K-AC166 (optional)
Battery Life
Still image shooting: Approx. 340 images (with the rechargeable
battery)*1
Movie playback: Approx. 260 minutes (with the rechargeable
battery)*2
Interfaces
USB 3.0 (Type-C), HDMI output terminal (Type D)
Waterproof and Dustproof Rating Equivalent to JIS Class 8 waterproof and JIS Class 6 dustproof
capabilities
109
Dimensions
Weight
Included Accessories
Language
GPS
Electronic Compass
6
Appendix
110
Webcam Function
Approx. 118.2 mm (W) × 65.5 mm (H) × 33.1 mm (D) (4.7 in.
(W) × 2.6 in. (H) × 1.3 in. (D)) (excluding operating controls and
protrusions)
Approx. 242 g (8.5 oz) (including the dedicated battery and SD
memory card)
Approx. 215 g (7.6 oz) (body only)
Rechargeable battery DB-110, USB power adapter, Power plug,
USB cable, Hand strap, Macro stand
English, French, German, Spanish, Portuguese, Italian, Dutch,
Japanese, Danish, Swedish, Finnish, Polish, Czech, Hungarian,
Turkish, Greek, Russian, Thai, Korean, Simplified Chinese,
Traditional Chinese
GPS, GLONASS
GPS display mode: LAT/LON, UTM, MGRS
GPS lock, GPS time adjustment, GPS logging, GPS data imprint,
UTC data imprint
Compass display: Cardinal direction, Degrees, Cardinal direction
+ Degrees
Declination correction, Heading data imprint
Compliant with USB Video Class 1.1
*1 Image storage capacity shows approximate number of images stored during CIPA-compliant testing. Actual
results may vary depending on the shooting conditions/circumstances. (Excerpt from CIPA standard: With
the monitor ON, with 50% use of flash, at 23°C (73°F))
*2 According to the result of RICOH IMAGING in-house testing.
USB Power Adapter AC-U2
Power Supply
Output
Average Active
Efficiency
No-Load Power Consumption
Operating Temperature
Storage Temperature
Dimensions
Weight
100 to 240 VAC (50/60 Hz), 0.2 A
5.0 VDC, 1000 mA
76%
70 mW
0 to 40°C (32 to 104°F)
* It depends on the operating temperature of the camera.
-20 to 60°C (-4 to 140°F)
42.5 mm (W) × 22 mm (H) × 66.5 mm (D) (excluding the power plug)
Approx. 40 g (excluding the power plug)
Rechargeable Battery DB-110
3.6 V
1350 mAh, 4.9 Wh
0 to 40°C (32 to 104°F)
-10 to 45°C (14 to 113°F)
39.8 mm (W) × 34.2 mm (H) × 8.5 mm (D)
Approx. 26 g
6
Appendix
Nominal Voltage
Rated Capacity
Operating Temperature
Storage Temperature
Dimensions
Weight
111
Image Storage Capacity
The following table shows the approximate number of images and recording time (in seconds) of movies that can be saved in the internal memory
and a memory card in various formats.
Still
image
Recorded
Pixels
Aspect
Ratio
8
9
0
8
Memory Card
(8 GB)
9
L
4:3
3
6
9
936
1616
2537
3:2
3
6
10
1053
1815
2843
M
S
6
XS
Appendix
112
0
1:1
4
8
12
1242
2145
3324
4:3
7
12
18
1858
3189
4917
3:2
7
13
20
2088
3522
5488
1:1
9
15
24
2458
4140
6378
4:3
11
22
31
3146
5900
8138
3:2
13
25
35
3522
6556
9077
1:1
15
29
40
4214
7867
10728
4:3
18
34
45
4816
9077
11801
3:2
20
37
51
5364
9834
13112
1:1
27
48
63
7152
12422
16858
2M
4:3
28
51
66
7613
13112
16858
1M
4:3
35
59
77
9077
15734
19668
VGA
Movie
Internal Memory
4:3
137
223
297
33717
59005
78673
3:2
148
255
297
39336
59005
78673
1:1
178
297
357
47204
78673
78673
Internal Memory
Memory Card
(8 GB)
30 fps
—
00:10:19
30 fps
00:00:06
00:52:04
60 fps
00:00:06
00:52:04
30 fps
00:00:14
01:26:04
120 fps
00:00:02
00:32:41
Recorded Pixels
Framerate
3840
1920
1280
Caution-------------------------------------------------------------------------------------------------------• The figures for movies are the total length that can be recorded. The maximum recording time per
shooting is 25 minutes or the equivalent of 4 GB.
• The number of images that can be taken may differ from the number of storable images displayed
on the monitor.
• The storage capacity varies depending on the shooting conditions and the capacity of the memory.
• The memory cards with which proper operation has been confirmed are listed below.
Recorded Pixels/Capture Mode
Memory Card Speed Class
4K 30fps
UHS Speed Class 3 or faster
FullHD 30fps, HD 60fps
[High Speed Movie] in the T mode
Speed Class 4 or faster
HD 30fps
Speed Class 2 or faster
• If a movie is recorded with a memory card with which proper operation has not been confirmed,
the movie recording stops when writing to the card is delayed. (The movie recorded by the time the
recording stops is saved.) If a movie is played back with such a card, the playback sound does not
synchronize with the video.
It is confirmed that a USB connection can be established between the camera and the following OSs.
Windows®
Windows® 11, Windows® 10
Mac
macOS 14 Sonoma, macOS 13 Ventura, macOS 12 Monterey, macOS 11 Big Sur
Appendix
Operating Environment
6
113
Using the Camera Abroad
USB Power Adapter (AC-U2), AC Adapter (K-AC166), and Battery
Charger (BJ-11)
These products are for use with currents of 100 to 240 V and 50 or 60 Hz.
Before traveling, purchase a travel adapter for connection to the type of outlets used at your destination.
Do not use these products with electrical transformers, as this could damage
the camera.
Television Playback
6
Appendix
114
Captured images can be played back on the televisions and monitors
equipped with a video input terminal. Use a commercially available HDMI®
cable. Use an HDMI® cable with a length of 3 m or less (recommended product: CAC-HD14EU15BK manufactured by ELECOM). The RICOH HDMI cable
HC-1 cannot be used.
Precautions for Use
Waterproof and Dustproof Function
• The camera complies with JIS/IEC waterproof grade 8 and JIS/IEC dustproof grade
6 (IP68).
• After shooting in the rain or washing with water, water may leak out from the lens
barrel or the tripod screw hole on the bottom of the camera. However, this is not
problematic because the camera is protected with the double-layered structure.
• The interior of the camera does not have the waterproof/dustproof structure. If water
enters inside the camera, immediately remove the battery and consult your nearest
repair center.
Camera
6
Appendix
• When opening and closing the battery/card cover, be sure to remove water and
dirt such as sand, mud, and dust adhering to the camera, and ensure that water or
dirt does not enter the camera interior. Do not open the cover of the camera on the
beach, at sea, or in a sandy area. If the cover is opened, seawater or sand may enter
the camera.
• When opening and closing the battery/card cover, do not wear cotton work gloves.
Dirt such as sand and dust adhering to the gloves may enter the camera interior. Also,
be sure to remove water and dirt such as sand and mud adhering to the camera, and
avoid locations where dirt can enter the camera interior.
• When the cover is opened, water droplets may be on the inside of the cover. In this
case, clean them out before use.
• If the mode dial is not operated for a long time, it may become difficult to turn due
to its waterproof structure. Turning the dial several times recovers the smooth dial
operation.
• On the beach or in dusty places such as a construction site, be careful to keep the
camera away from sand and dust.
• Do not leave the camera in places where temperature abnormally rises or in places in
high humidity, such as in a car, on the beach, and in a bathroom.
• Ensure that the camera is turned off before connecting the optional AC adapter.
• Do not pull the battery/card cover forcefully.
• Do not hold the battery/card cover when carrying the camera.
• If any metallic object, water, liquid, or other foreign object gets into the camera, immediately stop using the camera. Turn the camera off, remove the battery and memory card from the camera, and contact your nearest dealer or service center for repair.
• In cold climates, water droplets on the camera may freeze. Using the camera with
frozen water droplets could result in product malfunction. Do not leave the camera
with water droplets.
• Do not drop the camera or subject it to physical shocks.
115
6
Appendix
• When carrying the camera, be careful that it does not strike other objects. Particular
care is required to protect the lens and monitor.
• The flash may overheat if fired many times in succession. Do not use the flash successively more than necessary.
• Do not use the flash in close contact with your body or other objects. Failure to observe this precaution could result in burns or fire.
• Using the flash unit in close proximity to your subject’s eyes could cause temporary
visual impairment. Particular care should be observed when photographing infants.
• Do not direct the flash at the operator of a motor vehicle. Failure to observe this precaution could cause accidents.
• Battery may become hot with extended use. Wait for the battery to cool before removing it from the camera.
• The monitor may be difficult to read in direct sunlight.
• You may notice that monitor varies in brightness or contains pixels that do not light
or that are always lit. This is common to all LCD monitors and does not indicate a
malfunction.
• Do not apply force to the monitor.
• Abrupt changes in temperature may cause condensation, resulting in visible condensation inside the lens or camera malfunction. This can be avoided by placing the
camera in a plastic bag to slow the temperature change, and removing it only after
the air in the bag has reached the same temperature of its surroundings. When condensation occurs, remove the battery and memory card from the camera, and wait
until water droplets disappear.
• To prevent damage to the product, do not insert objects into the holes in the microphone and speaker coverings.
• Take a test shot to ensure that the camera is functioning properly before using it on
important occasions such as travel or weddings. We recommend that you keep this
manual and spare batteries at hand.
Conditions that May Cause Condensation-------------------------------------------------------------• If you move to an area with a sharply different temperature
• If humidity is high
• In a cold room after the heater has come on, or where the camera is exposed to cold air from an air
conditioner or other device
USB Power Adapter AC-U2
116
• Use the USB cable contained in the package.
• Do not subject the power adapter to severe impact or force.
• Do not use in extreme high or low temperatures or areas subject to vibration.
• Do not use in an area subject to direct sunlight or high temperature.
• Unplug the power plug from the power outlet after charging. Failure to observe this
precaution could result in fire.
• Do not allow other metallic objects to come in contact with the connectors, or contacts of the rechargeable battery as this can result in a short.
• The operating temperature range is 10 to 40°C (50 to 104°F). Charging takes longer at
temperatures below 10°C (50°F).
Rechargeable Battery DB-110
6
Appendix
• This is a lithium-ion battery.
• The battery is not fully charged at the time of purchase, so be sure to charge the
battery before use.
• Do not open or damage the battery as this can result in fire or injury. In addition, do
not heat the battery above 60°C (140°F) or expose the battery to fire.
• Due to the battery characteristics, the battery usage time may be shortened when
used in a cold environment, even if the battery is fully charged. Keep the battery
warm by placing it in a pocket or have a backup battery ready.
• When not in use, be sure to remove the battery from the camera or the battery charger. A small amount of current can leak from the battery even when the power is
off, creating excessive discharge and making the battery unusable. If the battery is
removed for more than five days, the date and time settings will be lost. In this case,
reset the date and time.
• If the battery is not used for a long time, charge the battery for 15 minutes once a
year before storing.
• Store in a dry, cool place with an ambient temperature between 15°C and 25°C (59°F
and 77°F). Avoid storing in extreme high or low temperatures.
• After charging the battery, do not immediately charge it again.
• Charge the battery at an ambient temperature between 10°C and 40°C (50°F and
104°F). Charging the battery at a high temperature can deteriorate the battery.
Charging at a low temperature may prevent full charging.
• If the battery usage time becomes very short even when fully charged, the battery
has reached the end of its service life. Replace with a new battery. Be sure to use a
replacement battery recommended by RICOH IMAGING.
• The charging time when charging with the AC-U2 while the battery is in the camera is
approximately 3 hours (at 25°C (77°F)).
Caution-------------------------------------------------------------------------------------------------------• Use of other batteries can cause explosion.
• Recycle used batteries in a recycle box at your local electronics store or supermarket.
117
Camera Care and Storage
Caring for the Camera
6
Appendix
• Image quality can be affected by fingerprints and other foreign matter on the lens.
Avoid touching the lens with your fingers.
• Remove dust or lint on the lens with a commercially available blower, or gently clean
the lens with a soft, dry cloth.
• When the camera becomes dirty or after using it on the beach, ensure that the battery/card cover is closed, and then rinse off dirt, sand, and salt in a basin of tap water
and wipe off the moisture with a soft, dry cloth.
• When the rubber packing becomes dirty, clean it with soft, dry cloth. Dirt adhering
to the rubber packing or scratches on it may deteriorate the waterproof function,
causing water leakage. When the dirt cannot be cleaned or you find scratches on the
rubber packing, take the camera to your nearest dealer or service center to replace it
with a new packing.
• In the unlikely event of malfunction, consult your nearest repair center.
• The camera contains high-voltage circuits. Do not disassemble it.
• Do not expose the camera to volatile substances such as thinner, benzine, or pesticides. Failure to observe this precaution could result in damage to the camera or its
coatings.
• The monitor is easily scratched, avoid touching it with hard objects.
• Clean the monitor by wiping it with a soft cloth dampened with a small amount of any
monitor cleaner that does not contain organic solvents.
Storage
• Do not store the camera where it will be exposed to:
Extreme heat or humidity, large changes in temperature or humidity
Dust, dirt, sand
Severe vibration
Prolonged contact with chemicals including pesticides, or with vinyl or rubber
products
Strong magnetic fields (for example, in the vicinity of a monitor, transformer, or
magnet)
• Store the camera in a lint-free camera case, etc. to prevent dirt and lint from adhering to the camera. Do not carry the camera in a pocket to prevent dirt and lint from
adhering to the camera.
• Remove the battery if the product is left unused for a long period of time.
118
Replacement of Rubber Packings
• Replace the rubber packing with a new one every two years even if it is not dirty and
there is no problem with it, to maintain the waterproof function. When the camera
is frequently used in water, in a sandy area, or in a dusty room, it is recommended to
replace it every year. Contact your service center to replace the rubber packing. (A fee
will be charged for the replacement.)
Before Cleaning
• Be sure to turn the camera off.
• Remove the battery and AC adapter from the camera.
6
Appendix
119
Warranty Policy
All our cameras purchased through authorized bona fide photographic distribution channels
are guaranteed against defects of material or workmanship for a period of twelve months from
the date of your purchase. Service will be rendered, and defective parts will be replaced without
cost to you within that period, provided the camera does not show evidence of impact, sand
or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to
operating instructions, or modification by an unauthorized repair shop. The manufacturer or its
authorized representatives shall not be liable for any repair or alterations except those made
with its written consent and shall not be liable for damages from delay or loss of use or from
other indirect or consequential damages of any kind, whether caused by defective material or
workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its
representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs
by non-authorized service facilities.
6
Appendix
Procedure During 12-month Warranty Period
Any camera which proves defective during the 12-month warranty period should be returned
to the dealer from whom you purchased the camera or to the manufacturer. If there are no
representatives of the manufacturer in your country, send the camera to the manufacturer, with
postage prepaid. In this case, it will take a considerable length of time before the camera can
be returned to you owing to the complicated customs procedures required. If the camera is
covered by warranty, repairs will be made and parts replaced free of charge, and the camera
will be returned to you upon completion of servicing. If the camera is not covered by warranty,
regular charges of the manufacturer or of its representatives will apply. Shipping charges are
to be borne by the owner. If your camera was purchased outside of the country where you
wish to have it serviced during the warranty period, regular handling and servicing fees may
be charged by the manufacturer’s representatives in that country. Notwithstanding this, your
camera returned to the manufacturer will be serviced free of charge according to this procedure
and warranty policy. In any case, however, shipping charges and customs clearance fees to be
borne by the sender. To prove the date of your purchase when required, please keep the receipt
or bills covering the purchase of your camera for at least a year. Before sending your camera for
servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer.
Always obtain a quotation for the service charge, and only after you accept the quoted service
charge, instruct the service station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from our distributors in some countries can
supersede this warranty policy. Therefore, we recommend that you review the
warranty card supplied with your product at the time of purchase, or contact
our distributor in your country for more information and to receive a copy of
the warranty policy.
120
For Customers in USA and Canada
Conditions of RICOH IMAGING North America Warranty
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you. This warranty gives you
specific rights and you may have other legal rights which vary from state to state. This warranty
policy does not affect the consumer’s statutory rights.
6
Appendix
1. RICOH IMAGING products originally distributed by RICOH IMAGING AMERICAS CORPORATION
and RICOH IMAGING CANADA and purchased through our authorized distribution channels,
are warranted by RICOH IMAGING AMERICAS CORPORATION and RICOH IMAGING CANADA
to the original retail purchaser for a period of one year from date of purchase against defects
in material and/or workmanship.
2. This warranty is limited to repair of defects in material and/or workmanship. These repairs will
be made at no charge to the customer. However, all charges related to shipping the product
to the service center are the responsibility of the owner. (Note: RICOH IMAGING AMERICAS
CORPORATION and RICOH IMAGING CANADA will not assume the responsibility for damages
or loss encountered in transit to the service center but will assist in processing any claims
whenever possible.)
3. This warranty does not cover finishes or batteries, nor does it cover damages resulting from
accident, misuse, abuse, dirt, water, sand, battery leakage, tampering, servicing performed or
attempted by unauthorized service agencies. This warranty is valid only in the country where
this product is purchased. Routine cleaning and normal cosmetic and mechanical wear are
not covered under the terms of this warranty. RICOH IMAGING AMERICAS CORPORATION and
RICOH IMAGING CANADA shall not be liable for any consequential or incidental damages
resulting from any breach of warranty, express or implied, applicable to this product.
4. Please be sure to keep your original or a copy of your proof of purchase receipt (bill of sale), to
obtain warranty service during the warranty period. The dated proof of purchase receipt (bill
of sale) must be provided to ensure warranty status. If the dated proof of purchase receipt (bill
of sale) is not received with the product, a repair estimate will be issued.
Register your product:
USA: https://us.ricoh-imaging.com/register-product/
CAN: https://www.ricoh-imaging.ca/register-your-ricoh-imaging-product/
For service-related inquiries:
USA: https://us.ricoh-imaging.com/repairs/
CAN: https://www.ricoh-imaging.ca/support/repairs/
For technical support:
USA: https://us.ricoh-imaging.com/online-support/
Tel: 1-800-234-0276
CAN: https://www.ricoh-imaging.ca/support/digital-support/
Tel: 1-800-224-6767
121
Pour les utilisateurs aux États-Unis et au Canada
Conditions de garantie RICOH IMAGING en Amérique du Nord
6
Appendix
1. Les produits RICOH IMAGING distribués à l’origine par RICOH IMAGING AMERICAS CORPORATION
et RICOH IMAGING CANADA et achetés par l’entremise de nos réseaux de distribution dûment
agréés sont garantis par RICOH IMAGING AMERICAS CORPORATION et RICOH IMAGING CANADA
contre tout défaut de fabrication et de main-d’œuvre pendant un an à partir de la date d’achat
initiale pour l’acheteur original.
2. Cette garantie se limite aux réparations des défauts de fabrication et de main-d’œuvre. Ces
réparations seront effectuées sans frais pour le client. Cependant, tous les frais reliés à l’envoi
du produit dans un Centre de service seront à la charge de l’utilisateur. (Nota : RICOH IMAGING
AMERICAS CORPORATION et RICOH IMAGING CANADA n’assumeront aucune responsabilité
pour les dommages ou perte pouvant survenir lors du transport, mais assistera dans le
traitement de toute réclamation dans la mesure du possible.)
3. Cette garantie ne couvre pas le fini ni les piles, et ne couvre pas non plus les dommages
résultant d’un accident, d’une utilisation inappropriée ou abusive ainsi que de la poussière,
eau, écoulement des piles, modifications ou réparations réalisées ou tentées par une agence
de réparation non agréée. Cette garantie n’est valable que dans le pays où le produit a été
acheté. Le nettoyage de routine et l’usure mécanique et esthétique ne sont pas couverts par
cette garantie. RICOH IMAGING AMERICAS CORPORATION et RICOH IMAGING CANADA ne
peuvent être tenues responsables des dommages accidentels, indirects et consécutifs résultant d’un manquement à une condition de la garantie, expresse ou implicite, applicable à ce
produit.
4. Conservez votre bon d’achat original (facture de vente datée) ou une , copie afin de fournir
lors d’une demande de réparation pendant la période de garantie. Votre bon d’achat doit être
fournie pour assurer l’état de la garantie. Si votre bon d’achat n’est pas reçue avec le produit,
un devis de réparation sera émis.
Certains pays, états ne permettent pas de limiter la durée d’une garantie implicite, donc les
limitations citées ci-dessus peuvent ne pas s’appliquer à vous. De même, certains pays, états
permettent pas l’exclusion ou la limitation des dommages accidentels ou consécutifs, en
conséquence, les limitations peuvent ne pas s’appliquer à vous. Cette garantie vous donne des
droits spécifiques et vous pouvez avoir d’autres droits selon la juridiction en vigueur dans votre
région. Cette garantie ne peut diminuer les droits juridiques du consommateur.
Renseignement relatif au service :
https://www.ricoh-imaging.ca/fr/service-et-solution/repairs/
Soutien technique :
https://www.ricoh-imaging.ca/fr/service-et-solution/soutien-technique/
122
Regulatory Compliance Statements
For Customers in USA
STATEMENT OF FCC COMPLIANCE
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance
Information
Product Name: PENTAX WG-8
Model Number: R08050
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Responsible party: RICOH IMAGING AMERICAS CORPORATION
Address: 2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.
Phone: 800-877-0155
FCC Part 15 Subpart B Class B
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
6
Appendix
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
123
FCC Part 15 Subpart C
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low
power wireless devices are absolutely safe. Low power Wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while being used. Whereas high
levels of RF can produce health effects (by heating tissue), exposure of low-level RF that
does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have
suggested that some biological effects might occur, but such findings have not been
confirmed by additional research. R08050 has been tested and found to comply with
FCC radiation exposure limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines.
6
Appendix
124
CAUTION: RF Exposure
To ensure compliance with the Radio Frequency (RF) exposure guidelines, this device
must be used at least 5 mm away from your body or nearby persons. Failure to observe
this warning could result in the RF exposure levels exceeding the applicable limits.
SAFETY STANDARD FOR BUTTON CELL OR COIN BATTERIES AND
CONSUMER PRODUCTS CONTAINING SUCH BATTERIES
This product contains a non-replaceable button cell or coin battery.
Do not replace the button cell or coin battery. This can cause a fire or electric shock.
WARNING
6
Appendix
• INGESTION HAZARD: This product
contains a button cell or coin battery.
• DEATH or serious injury can occur if
ingested.
• A swallowed button cell or coin battery can cause Internal Chemical
Burns in as little as 2 hours.
• KEEP new and used batteries OUT
OF REACH of CHILDREN.
• Seek immediate medical attention
if a battery is suspected to be swallowed or inserted inside any part of
the body.
a) Immediately dispose of used battery according to local regulations and keep it away
from children. Do NOT dispose of the battery in household trash or incinerate.
b) Even a used battery may cause severe injury or death.
c) Call a local poison control center for treatment information.
d) Battery type: MS414GE FL26E
e) Nominal battery voltage: 3 V
f ) A non-rechargeable battery is not to be recharged.
g) Do not force discharge, recharge, disassemble, heat above manufacturer’s specified
temperature rating, or incinerate the battery. Doing so may result in injury due to
venting, leakage, or explosion, resulting in chemical burns.
125
GENERAL CERTIFICATE OF COMFORMITY
PRODUCT MODEL
MODEL: R08050
TYPE: DIGITAL CAMERA
THE IMPORTER ISSUING
THE CERTIFICATE
RICOH IMAGING AMERICAS CORPORATION
2 Gatehall Drive Suite 204, Parsippany,
New Jersey 07054, U.S.A.
(800) 234-0276
CONTACT INFORMATION
FOR THE INDIVIDUAL
MAINTAINING RECORDS
OF TEST RESULTS
RICOH IMAGING AMERICAS CORPORATION
Yuliana Kwok
[email protected]
2 Gatehall Drive Suite 204, Parsippany,
New Jersey 07054, U.S.A.
(905) 795-5729
TEST ITEM MODEL
R02050
Similar model: R08050
6
THE DATE AND PLACE
OF MANUFACTURE
November, 2018
Jawa Barat, Indonesia
Appendix
THE DATE AND PLACE
WHERE THE PRODUCT
WAS TESTED
18/1/2024
Tokyo, Japan
LABORATORY
CONDUCTING TESTING
ON WHICH THE
CERTIFICATE DEPENDS
RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo
143-8555, Japan
126
For Customers in USA and Canada
Lithium-ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable batteries
to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free 1-800822-8837, or visit https://www.call2recycle.org/.
For Customers in Canada
Innovation, Science and Economic Development Canada (ISED)
Regulatory Compliance Notice
This Class B digital apparatus complies with Canadian ICES-003 (B).
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
6
Appendix
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low
power wireless devices are absolutely safe. Low power wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while being used. Whereas high
levels of RF can produce health effects (by heating tissue), exposure of low-level RF that
does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have
suggested that some biological effects might occur, but such findings have not been
confirmed by additional research. The R08050 has been tested and found to comply
with ISED radiation exposure limits set forth for an uncontrolled environment and meets
RSS-102 of the ISED radio frequency (RF) Exposure rules.
CAUTION: RF Exposure
To ensure compliance with the Radio Frequency (RF) exposure guidelines, this device
must be used at least 5 mm away from your body or nearby persons. Failure to observe
this warning could result in the RF exposure levels exceeding the applicable limits.
127
Pour les utilisateurs au Canada
Avis de conformité à la réglementation d’Innovation, Sciences et
Développement économique Canada (ISDE)
Cet appareil numérique de la classe B est conforme à la norme NMB-003 (B) du Canada.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1. L’appareil ne doit pas produire de brouillage ;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
6
Appendix
Les connaissances scientifiques dont nous disposons n’ont mis en évidence aucun problème de santé associé à l’usage des appareils sans fil à faible puissance. Nous ne sommes
cependant pas en mesure de prouver que ces appareils sans fil à faible puissance sont
entièrement sans danger. Les appareils sans fil à faible puissance émettent une énergie
fréquence radioélectrique (RF) très faible dans le spectre des micro-ondes lorsqu’ils sont
utilisés. Alors qu’une dose élevée de RF peut avoir des effets sur la santé (en chauffant les
tissus), l’exposition à de faibles RF qui ne produisent pas de chaleur n’a pas de mauvais
effets connus sur la santé. De nombreuses études ont été menées sur les expositions
aux RF faibles et n’ont découvert aucun effet biologique. Certaines études ont suggéré
qu’il pouvait y avoir certains effets biologiques, mais ces résultats n’ont pas été confirmés
par des recherches supplémentaires. Le R08050 a été testé et jugé conforme aux limites
d’exposition aux rayonnements ISDE énoncées pour un environnement non contrôlé et
respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISDE.
ATTENTION : Exposition aux RF
Pour garantir la conformité avec les directives d’exposition aux fréquences radioélectriques (RF), cet appareil doit être utilisé à au moins 5 mm de votre corps ou des personnes se trouvant à proximité. Le non-respect de cet avertissement peut entraîner des
niveaux d’exposition aux RF supérieurs aux limites applicables.
128
For Customers in Europe
Information for Users on Collection and Disposal of Old Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipment and batteries
should not be mixed with general household waste.
Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment,
recovery and recycling of these products.
By disposing of these products correctly you will help ensure that the
waste undergoes the necessary treatment, recovery and recycling and
thus prevent potential negative effects on the environment and human
health which could otherwise arise due to inappropriate waste handling.
For more information about collection and recycling of used products, please contact
your local authorities, your waste disposal service or the point of sale where you purchased the products.
6
Appendix
If a chemical symbol is added beneath the symbol shown above, in accordance with
the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium,
Pb = Lead) is present in the battery at a concentration above an applicable threshold
specified in the Battery Regulation.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of
disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to
the dealer, even when you don’t purchase a new product. Further collection facilities are
listed on the home page of www.swico.ch or www.sens.ch.
129
Notice to Users in Countries that Require the CE Marking
This product complies with the essential requirements and provisions.
RE Directive 2014/53/EU
The EU Declaration of Conformity is available by accessing the URL:
https://www.ricoh-imaging.co.jp/english/support/declaration_of_conformity.html
and selecting the product applicable.
Importer (CE Marking): RICOH IMAGING EUROPE S.A.S.
7-9, avenue Robert Schuman, 94150 Rungis, FRANCE
Manufacturer: RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
Battery Regulation (EU) 2023/1542
Importer (CE Marking): RICOH IMAGING EUROPE S.A.S.
7-9, avenue Robert Schuman, 94150 Rungis, FRANCE
https://ricoh-imaging.eu/
6
Appendix
130
Manufacturer: RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
https://www.ricoh-imaging.co.jp/english/
The CE Mark is a conformity mark of the European Union.
Notice to Users in Countries that Require the UKCA Marking
This product complies with the essential requirements and provisions.
Radio Equipment Regulations 2017
The UK Declaration of Conformity is available by accessing the URL:
https://www.ricoh-imaging.co.jp/english/support/declaration_of_conformity.html
and selecting the product applicable.
Manufacturer : RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
The UKCA Mark is a Regulation conformity mark of the United Kingdom.
6
Appendix
131
For Customers in Thai
This telecommunication equipment conforms to the requirements of the Office of the
National Broadcasting and Telecommunications Commission.
6
Appendix
132
Index
Numerics
1cm Macro...................................................... 49
A
A-Bracket......................................................... 61
AC adapter................................................... 101
Adding title picture..................................... 77
ADJ. button..................................................... 20
ADJ Button Setting...................................... 82
ADJ. mode....................................................... 20
AE Metering.................................................... 52
AF....................................................................... 50
Anti Red-eye (Flash)..................................... 54
Aspect Ratio................................................... 62
Assist (Face Detection)............................... 50
Auto Image Rotation................................... 68
AUTO ISO Range........................................... 53
Auto Macro..................................................... 49
Auto mode...................................................... 38
Auto Power Off.............................................. 86
Auto WB (White Balance)........................... 56
AV device......................................................... 69
B
Battery....................................................... 31, 33
Blink Detection.............................................. 38
Bright (Image Tone)..................................... 63
Burst Shoot..................................................... 59
Button............................................................... 14
C
Calendar display........................................... 66
Calibrate Level............................................... 84
CALS mode..................................................... 40
CALS Pixels...................................................... 40
CALS Quality................................................... 40
Camera route................................................. 90
Camera Settings File.................................... 81
Capture mode................................................ 40
Card................................................................... 31
Care................................................................ 118
Center (AE Metering)................................... 52
Certifications.................................................. 29
Changing display.......................................... 18
Charging the battery................................... 33
Cloudy (White Balance).............................. 56
Compass Calibration................................... 92
Compass Heading........................................ 92
Confirm. Time................................................ 38
Connection to a computer........................ 73
Contrast........................................................... 64
Cont. Shoot..................................................... 59
Copyright Info................................................ 97
Correcting a range of tones...................... 65
Cropping.......................................................... 75
Cursor Pos. Keeping..................................... 23
Customization............................................... 82
Customize menu........................................... 27
D
Data Imprint................................................... 93
Date and time setting................................. 36
Date Imprint................................................... 64
Daylight (White Balance)........................... 56
Declination..................................................... 92
Delete........................................................ 39, 70
Destination..................................................... 99
Dial..................................................................... 14
Digital Filter.................................................... 76
Digital microscope mode.......................... 40
Digital SR (Scene)......................................... 41
Digital zoom................................................... 39
Direct keys....................................................... 19
Discard log data............................................ 92
Divide (AE Metering)................................... 52
Divide Movies................................................ 77
DOF Composite (Scene)............................. 41
D-Range Setting........................................... 65
Drive Mode..................................................... 58
E
Editing images............................................... 74
Embed Info..................................................... 97
EV Comp.......................................................... 43
Exif..................................................................... 97
F
Face Detection............................................... 50
File name......................................................... 96
File Sequence No.......................................... 96
Filter.................................................................. 76
Fireworks (Scene)......................................... 41
Flash.................................................................. 54
FlashAir............................................................. 32
Flash Off (Flash)............................................. 54
133
Flash On (Flash)............................................. 54
Flower (Scene)............................................... 41
Fluorescent (White Balance)..................... 56
Fn button......................................................... 21
Focus Assist.................................................... 50
Focus Mode.................................................... 49
Folder display................................................. 66
Format.............................................................. 37
G
GPS.................................................................... 89
GPS Data Imprint.......................................... 93
GPS Disp Mode.............................................. 90
GPS Lock.......................................................... 90
GPS Log............................................................ 90
GPS Time Adjustment................................. 90
Green button.......................................... 21, 83
Green Mode.................................................... 40
Grid Guide Display Op................................ 84
Guide Display................................................. 42
H
Handheld Night Snap (Scene)................. 41
HDMI®............................................................... 69
HDR Filter........................................................ 76
HDR (Movie)................................................... 62
HDR (Scene).................................................... 41
Heading Data Imprint................................. 93
Highlight Cor.................................................. 65
High Speed Movie (Scene)........................ 41
I
Image Copy.................................................... 71
Image Tone..................................................... 63
Infinity (Focus)............................................... 49
Initialized Setting......................................... 23
Initial settings................................................ 35
Ink Rubbing Filter......................................... 76
Instant Review............................................... 38
Intelligent zoom........................................... 39
Internal memory........................................... 32
Interval Movie (Scene)................................ 41
Interval Shooting (Scene).......................... 41
IQ Enhancer.................................................... 64
ISO Setting...................................................... 53
K
Kids (Scene).................................................... 41
134
L
Landscape (Scene)....................................... 41
Language setting......................................... 36
LAT/LON (GPS)............................................... 90
LCD Brightness.............................................. 85
Lens Adapter On........................................ 100
Level Setting.................................................. 84
Location Data................................................. 89
M
Macro................................................................ 49
Macro stand.................................................... 11
Magnifying captured image..................... 39
Manual Focus................................................. 51
Manual WB (White Balance)..................... 57
M-Cont............................................................. 59
Memory card.................................................. 31
Memory retrospective continuous
shooting...................................................... 59
Menu................................................................. 22
MF (Focus)....................................................... 51
MGRS (GPS)..................................................... 90
Microphone............................................. 45, 62
Monitor............................................................ 16
Monitor Auto off Delay............................... 86
Monochrome (Image Tone)...................... 63
Movie................................................................ 44
Movie Button................................................. 20
Movie Edit....................................................... 77
Movie menu................................................... 25
Movie SR.......................................................... 65
Multi (AF)......................................................... 50
Multiple image display............................... 66
N
Natural (Image Tone)................................... 63
New folder options...................................... 94
Night Scene (Scene).................................... 41
O
Operating environment.......................... 113
Operation Volume........................................ 85
Optical zoom.................................................. 39
Outdoor View................................................. 85
P
Package contents......................................... 11
Pet (Scene)...................................................... 41
PF (Focus)........................................................ 49
Pix. Track SR.................................................... 65
Playback.................................................... 39, 66
Playback menu.............................................. 26
Playback Volume.......................................... 85
P mode............................................................. 40
Portrait (Scene).............................................. 41
Power................................................................ 35
Power Button Hold Op............................... 35
Power Button Lamp.............................. 35, 85
Power Saving................................................. 86
Processing images....................................... 74
Program mode.............................................. 40
Protect.............................................................. 72
Q
Quality Level.................................................. 62
Quick Zoom.................................................... 39
R
Recorded Pixels............................................. 62
Record log....................................................... 90
Recover File.................................................... 71
Red-eye Edit................................................... 79
Reg. USER........................................................ 80
Remote Ctl...................................................... 60
Reset.................................................................. 23
Reset File Number........................................ 97
Resize................................................................ 74
Ring Light........................................................ 55
Ring Light (White Balance)....................... 55
Rotation........................................................... 68
S
Saturation........................................................ 64
Save as Still Image........................................ 77
Save log data.................................................. 92
Saving power................................................. 86
Scene mode.................................................... 41
SCN mode....................................................... 41
S-Cont............................................................... 59
SD memory card........................................... 31
Self-timer......................................................... 58
Sensitivity........................................................ 53
Setup menu.................................................... 29
Shade (White Balance)............................... 56
Shadow Cor.................................................... 65
Sharpness........................................................ 64
Shooting menu............................................. 24
Show folder at startup................................ 84
Shut-down Screen....................................... 84
Single image display................................... 39
Slide Film (Image Tone).............................. 63
Slideshow........................................................ 67
Small Face Filter............................................ 76
Smile (Face Detection)................................ 50
Sound............................................................... 85
Sound volume............................................... 85
Specifications.............................................. 108
Sport (Scene).................................................. 41
Spot (AE Metering)....................................... 52
Spot (AF).......................................................... 50
START DATE/TIME......................................... 84
Start-up Screen............................................. 84
Storage.......................................................... 118
Storage capacity................................. 34, 112
Streaming continuous shooting............. 59
Surf & Snow (Scene).................................... 41
T
Thumbnail display....................................... 66
Tone Adjustment.......................................... 64
Tracking (AF).................................................. 50
Tungsten (White Balance)......................... 57
TV....................................................................... 69
U
Underwater Movie (Scene)....................... 41
Underwater (Scene)..................................... 41
USB cable......................................................... 73
USB Connection............................................ 73
USB power adapter...................................... 33
User mode....................................................... 80
UTC Data Imprint.......................................... 93
UTM (GPS)....................................................... 90
UVC.................................................................... 47
V
Version Info..................................................... 29
Vibrant (Image Tone)................................... 63
W
Warranty Policy.......................................... 120
Webcam........................................................... 47
White Balance................................................ 56
Wide conversion lens............................... 100
Wind Suppression........................................ 62
World Time...................................................... 99
135
Z
Zoom................................................................. 39
136
RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555,
JAPAN
(https://www.ricoh-imaging.co.jp/english/)
RICOH IMAGING EUROPE
S.A.S.
7-9, avenue Robert Schuman, 94150 Rungis,
FRANCE
(https://www.ricoh-imaging.eu)
RICOH IMAGING
2 Gatehall Drive Suite 204, Parsippany, New Jersey
AMERICAS CORPORATION 07054, U.S.A.
(https://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA
INC.
5560 Explorer Drive Suite 100, Mississauga, Ontario,
L4W 5M3, CANADA
(https://www.ricoh-imaging.ca)
RICOH IMAGING CHINA
CO., LTD.
Room A 23F Lansheng Building, 2-8 Huaihaizhong
Road, Huangpu District, Shanghai, 200021, CHINA
(https://www.ricoh-imaging.com.cn/china/)
https://www.ricoh-imaging.co.jp/english/
This contact information may change without
notice. Please check the latest information on our
websites.
RICOH IMAGING COMPANY, LTD.
May, 2024
EN
EN USA GB GB AE AE
Printed in Indonesia
1AG6P1P7412--
">