PENTAX GR IV Digital Compact Camera Manual

Operating Manual
The serial number is located on the bottom of the camera.
Chapter 1: Introduction
Read this chapter before use.
This chapter gives you an overview of the RICOH GR IV.
Chapter 2: Getting Started
Read this chapter before using the RICOH GR IV for the first time.
This chapter explains about basic operations such as turning the camera on,
performing shooting, and playing back images.
Chapter 3 and later
Read these chapters when you want to learn more about the different
camera functions.
These chapters explain about shooting and playback functions, as well as
how to customize the camera settings and use it with a computer.
Model: R09010
Regarding User Registration
Thank you for purchasing a RICOH IMAGING product.
In order to provide you with the best customer support and service experience for the product you have purchased, we ask you to complete the user
registration.
Visit the following website to complete the user registration.
https://www.ricoh-imaging.com/registration/
Registered users will be notified by e-mail about important customer support information, such as firmware version updates, etc.
Introduction
This Operating Manual provides information on how to use the shooting
and playback functions of this camera and related precautions.
Thoroughly read this Operating Manual to make the best use of the functions available with this camera. Be sure to keep this Operating Manual for
future reference.
It is recommended to update the camera firmware to the latest version before using the camera.
For details on the latest firmware version, refer to the following firmware
download site.
https://www.ricoh-imaging.co.jp/english/
RICOH IMAGING COMPANY, LTD.
1
Safety precautions
Read all safety precautions thoroughly to ensure safe use.
Test shots
Take test shots to ensure that the camera is working properly
before taking pictures on important occasions.
Copyright
Reproduction or alteration of copyrighted documents, magazines,
and other materials, other than for personal, home, or other
similarly limited purposes, without the consent of the copyright
holder, is prohibited.
Exemption from liability
RICOH IMAGING COMPANY assumes no liability for failure to
record or display images as a result of product malfunction.
Radio interference
Operating this camera in the vicinity of other electronic equipment may adversely affect both the camera and the other device.
Interference is particularly likely if the camera is used in close
proximity to a radio/TV receiver. In such case, take the following
measures.
• Keep the camera as far away as possible from the radio/TV
receiver.
• Reorient the antenna of the radio/TV receiver.
• Use a different wall outlet.
This publication may not be reproduced in whole or in part without RICOH IMAGING COMPANY’s express written
permission.
© RICOH IMAGING COMPANY, LTD. 2025
RICOH IMAGING COMPANY reserves the right to change the contents of this manual at any time without prior
notice.
Every effort has been made to ensure the accuracy of the information in this manual. Should you nevertheless
notice any errors or omissions, we would be grateful if you would notify us at the address listed on the back cover
of this manual.
2
About the Wireless LAN and Bluetooth® Functions
• Do not use the camera in a place where electrical products, AV/OA devices, and so on generate magnetic fields
and electromagnetic waves.
• If the camera is affected by magnetic fields and electromagnetic waves, it may not be able to communicate.
• If the camera is used near a TV or radio, poor reception or TV screen glitch may occur.
• If there are multiple wireless LAN access points or Bluetooth® devices near the camera and the same channel is
used, search operation may not be executed correctly.
• The security of your data stored, sent, or received is your own responsibility.
In the frequency band used by the camera, along with industrial, scientific, and medical devices such as microwave ovens, premises radio stations (wireless stations requiring license) and specified low power radio stations
(wireless stations not requiring license) for mobile object identification used in factory production lines, etc., and
amateur radio stations (wireless stations requiring license) are operated.
1. Before using the camera, confirm that premises radio stations and specified low power radio stations for
mobile object identification and amateur radio stations are not operated in the vicinity.
2. In the event that the camera causes harmful radio wave interference to premises radio stations for mobile
object identification, immediately change the frequency being used to avoid interference.
3. If you have other troubles such that the camera causes harmful radio wave interference to specified low
power radio stations for mobile object identification or to amateur radio stations, contact your nearest service
center.
The certification marks can be displayed electronically on the monitor.
Displaying the Certification Marks--------------------------------------------------------------------------------
1 Press f to display the menu screen.
2 Use abcd to display the E8 menu (About This Device).
3 Use abcd to select [Certification Marks], and press e.
Les marques de certification peuvent être affichées électroniquement sur l’écran.
Affichage des marques de certification---------------------------------------------------------------------------
1 Appuyez sur f pour afficher l’écran de menu.
2 Utilisez abcd pour afficher le menu E8 (À propos de l’appareil).
3 Utilisez abcd pour sélectionner [Marques de certification], et appuyez sur e.
3
Trademarks
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and
other countries.
• Mac, macOS, and App Store are trademarks of Apple Inc.
• IOS is a trademark or registered trademark of Cisco Systems, Inc. in the U.S. and other countries and is used under
license.
• Adobe and the Adobe logo are registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• This product includes DNG technology under license by Adobe Systems Incorporated.
• The DNG logo is either a registered trademark or trademark of Adobe Systems Incorporated in the United States
and/or other countries.
• The microSDXC logo is a trademark of SD-3C, LLC.
• Google, Google Play, and Android are trademarks or registered trademarks of Google LLC.
• Bluetooth is a registered trademark or trademark of Bluetooth SIG, Inc. in the U.S. and other countries.
• USB Type-C and USB-C are trademarks of USB Implementers Forum.
• DisplayPort™ is a trademark owned by the Video Electronics Standards Association (VESA®) in the United States
and other countries.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and/or other countries.
Other company names, product names, and logos are trade names, trademarks, or registered trademarks of their
respective companies.
• This product uses the RICOH RT font designed by RICOH COMPANY, LTD.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses
in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”)
and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained
from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from Via Licensing Alliance.
See https://www.via-la.com/.
Announcement about the Open Source Software
This camera includes the open source software (OSS) licensed under the GNU General Public License (GPL), GNU
Lesser General Public License (LGPL), and/or other licenses. The information about licenses of each OSS used in
the camera is saved in the camera internal memory as a text file. Connect the camera to a computer, access the
“oss_license” folder under “Software License”, and open each text file to read the license terms.
The source codes of OSS used in the camera are disclosed under the license terms of GPL, LGPL, etc. If you need the
source codes, access the following URL.
https://www.ricoh-imaging.co.jp/english/products/oss/
4
Safety Precautions
Warning Symbols
Various symbols are used throughout this Operating Manual and on the product to
prevent physical harm to you or other people and damage to property. The symbols
and their meanings are explained below.
Danger
This symbol indicates matters that may lead to imminent risk of
death or serious injury if ignored or incorrectly handled.
This symbol indicates matters that may lead to death or serious
Warning injury if ignored or incorrectly handled.
Caution
This symbol indicates matters that may lead to injury or physical
damage if ignored or incorrectly handled.
Meaning of Symbols
The
symbol alerts you to actions that must be performed.
The
symbol alerts you to prohibited actions.
symbol may be combined with other symbols to indicate that a
The
specific action is prohibited.
Example:
: Do not touch
: Do not disassemble
Observe the following precautions to ensure safe use of this camera.
Danger
Do not attempt to disassemble, repair, or alter the camera yourself. The
high-voltage circuitry in the camera poses significant electrical hazard.
Q Do not attempt to disassemble, alter, or directly solder the battery.
Q
Do not put the battery in a fire, attempt to heat it, use it in a high temperature environment such as next to a fire or inside a car, or abandon it. Do
not put it into water or the sea or allow it to get wet.
Q Do not attempt to pierce, hit, compress, drop, or subject the battery to any
other severe impact or force.
Q Do not use a battery that is significantly damaged or deformed.
Q Do not connect the positive (+) and negative (-) poles of the battery with a
wire or other metallic item. Also, do not carry or store together with metal
objects such as ballpoint pens and necklaces.
Q Stop using the camera immediately in the event of abnormalities such as
smoke, unusual odors, or excessive heat being emitted. Contact your nearest service center or dealer for repair.
Q
5
Use the camera or optional Battery Charger BJ-12 to charge the battery.
Do not use the battery with any camera except the cameras compatible
with the DB-120.
Q If the battery fluid leaks and gets into your eyes, immediately wash your
eyes thoroughly with tap water or other clean water without rubbing, and
seek medical attention immediately.
Q
Warning
Turn off the power immediately in the event of abnormalities such as
smoke or unusual odors being emitted. Remove the battery as soon as
possible, being careful to avoid electric shocks or burns. If you are drawing
power from a household electrical outlet, be sure to unplug the power
plug from the outlet. Failure to observe this precaution could result in fire
or electric shocks. Contact your nearest service center or dealer. Stop using
the camera immediately if it is malfunctioning.
Q Turn off the power immediately if any metallic object, water, liquid, or other foreign object gets into the camera. Remove the battery and memory
card as soon as possible, being careful to avoid electric shocks or burns.
If you are drawing power from a household electrical outlet, be sure to
unplug the power plug from the outlet. Failure to observe this precaution
could result in fire or electric shocks. Contact your nearest service center or
dealer. Stop using the camera immediately if it is malfunctioning.
Q If the monitor is damaged, avoid any contact with the liquid crystal inside it.
Follow the appropriate emergency measures below.
• SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the
affected area thoroughly with water, then wash well with soap.
• EYES: If it gets in your eyes, wash your eyes with clean water for at least
15 minutes and seek medical advice immediately.
• INGESTION: If any of the liquid crystal is ingested, rinse the mouth out
thoroughly with water. Have the person drink a large amount of water
and induce vomiting. Seek medical assistance immediately.
Q
Q
Keep the battery and memory card used in the camera out of the reach of
children to prevent accidental swallowing. The battery and memory card
are harmful if swallowed. Seek medical assistance immediately.
6
Q
•
•
•
•
Follow these precautions to prevent the battery from leaking, overheating, igniting, or exploding.
Do not use a battery other than those specifically recommended for the
camera.
Do not carry or store the battery together with metal objects such as
ballpoint pens, necklaces, coins, and hairpins.
Do not put the battery into a microwave or high pressure container.
If leakage of battery fluid, a strange odor, color change, etc. is noticed
during use or during charging, remove the battery from the camera or
battery charger immediately and keep it away from fire.
Observe the following in order to prevent fire, electrical shock, or exploding of the battery while charging.
• Use only the indicated power supply voltage. Also avoid the use of
multi-socket adapters and extension cords.
Q
Keep the battery out of the reach of children.
If the battery does not finish charging after the prescribed charging time,
discontinue charging.
Q If the battery leaks or emits an unusual odor, immediately move it away
from any sources of fire.
Q Keep the camera out of the reach of children. For children, accidents may
occur because they cannot understand the contents of “Safety Precautions” and “Precautions for Use”.
Q Do not use the camera near flammable gases, gasoline, benzine, thinner,
or similar substances. Failure to observe this precaution could result in an
explosion, fire, or burns.
Q Do not use the camera in a location where usage is restricted or prohibited, such as on airplanes. Failure to observe this precaution could result
in an accident.
Q Do not use the battery charger or AC adapter with commercially available
electronic transformers when traveling abroad. Failure to observe this precaution could result in fire, electric shocks, or product malfunction.
Q Use only the indicated power supply voltage. Failure to observe this precaution could result in fire or electric shocks.
Q
Q
Do not touch the internal components of the camera if they become exposed as a result of being dropped or damaged. The high-voltage circuitry
in the camera could lead to electric shocks. Remove the battery as soon
as possible, being careful to avoid electric shocks or burns. Contact your
nearest service center or dealer if it is damaged.
Q If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, do not touch the power plug. Failure to observe this
precaution could result in electric shocks.
Q
7
If any metallic object, water, liquid, or other foreign object gets into the
camera, immediately remove the power plug from the outlet and contact
your nearest service center or dealer for repair. Failure to observe this precaution could result in fire or electric shocks.
Q If an abnormality such as an unusual sound or smoke is emitted from the
camera, immediately remove the power plug from the outlet and contact
your nearest service center or dealer for repair. Stop using the camera immediately if it is malfunctioning.
Q
Q
Do not attempt to disassemble the camera yourself. The high-voltage circuitry in the camera could lead to electric shocks.
Do not use the camera in wet areas such as a kitchen. Failure to observe
this precaution could result in fire or electric shocks.
Q Do not use the camera in a bathroom. Failure to observe this precaution
could result in fire or electric shocks.
Q
Caution
Q
Contact with fluid leaking from a battery can lead to burns. If part of your
body comes in contact with a damaged battery, rinse the area with water
immediately. (Do not use soap.)
If a battery starts to leak, remove it immediately from the camera and wipe
the battery chamber thoroughly before replacing it with a new battery.
Do not allow the camera to get wet. In addition, do not operate it with wet
hands. Failure to observe this precaution could result in electric shocks.
Q Do not fire the flash at drivers of vehicles, as this may cause the driver to
lose control and result in a traffic accident.
Q Do not cover the camera while using it. Failure to observe this precaution
could result in fire.
Q Do not short-circuit the terminal metal contacts. Failure to observe this
precaution could result in fire.
Q Do not use the camera in wet areas or areas subject to oil smoke such as
a kitchen. Failure to observe this precaution could result in fire or electric
shocks.
Q
Q
Q
Safety Precautions
for Accessories
Remove the power plug from the outlets before cleaning the camera.
Remove the power plug from the outlets when the camera is not used.
When using optional products, carefully read the user’s manuals provided with the product before using that product.
Memo----------------------------------------------------------------------------------• The bags used for camera packaging are made of environmentally friendly
bamboo material. If any powder from the packaging bag adheres to the
camera, remove it with a commercially available blower or cleaning paper
before using the camera.
8
Contents
Regarding User Registration.............................................................................................. 1
Introduction............................................................................................................................ 1
Safety Precautions................................................................................................................. 5
1 Introduction
13
Checking the Contents of the Package.......................................................................13
Names and Functions of the Working Parts...............................................................14
Operating Controls............................................................................................................................16
Indicators on the Monitor.................................................................................................18
Shooting Screen..................................................................................................................................18
Playback Screen..................................................................................................................................19
Changing the Screen Display.........................................................................................................20
Using the Touch Screen....................................................................................................................21
How to Change Function Settings................................................................................22
Using the Buttons and Dial.............................................................................................................22
Using the Menus.................................................................................................................................25
Menu List................................................................................................................................28
A Still Image Setting Menus........................................................................................................28
B Movie Settings Menus...............................................................................................................31
C Playback Settings Menus......................................................................................................... 32
D Customize Settings Menus......................................................................................................34
E Setup Menus.................................................................................................................................37
2 Getting Started
40
Setting the Battery and a Memory Card.....................................................................40
Inserting the Battery and a Memory Card.................................................................................40
Charging the Battery.........................................................................................................................42
Initial Settings.......................................................................................................................44
Turning the Camera On....................................................................................................................44
Setting the Language, Smartphone Linkage, and Date/Time........................................... 45
Formatting a Memory Card.............................................................................................................46
Basic Shooting Operation.................................................................................................48
Shooting in the Program Mode.....................................................................................................48
Viewing the Taken Images...............................................................................................................50
3 Taking Images
52
Taking Still Pictures.............................................................................................................52
Setting the Exposure Mode............................................................................................................52
9
Recording Movies................................................................................................................57
Playing Back Movies..........................................................................................................................59
Setting the Focus.................................................................................................................60
Setting the Focus Mode...................................................................................................................60
Shooting Close-ups (Macro)...........................................................................................................65
Shooting with a Single Press of the Shutter Release Button (Full Press Snap)............. 66
Setting the Exposure..........................................................................................................67
Selecting the Metering Method....................................................................................................67
Setting the ISO Sensitivity...............................................................................................................69
Using the Flash....................................................................................................................................70
Reducing Noise...................................................................................................................................73
Setting the White Balance................................................................................................75
Setting the White Balance Manually............................................................................................78
Setting the Color Temperature......................................................................................................79
Setting the Drive Mode.....................................................................................................80
Shooting Continuously (Continuous Shooting)...................................................................... 81
Shooting with Varied Exposure Values (Bracketing).............................................................. 82
Shooting While Merging Images Together (Multi-exposure)............................................. 83
Shooting Automatically at Set Intervals (Interval Shooting).............................................. 85
Recording Star Trails (Interval Composite)................................................................................ 87
Using the Self-timer...........................................................................................................................89
Configuring the Image Save Settings..........................................................................90
Setting the Save Destination..........................................................................................................90
Still Image Save Settings..................................................................................................................91
Movie Save Settings...........................................................................................................................92
Setting the Image Finishing Tone and Correction...................................................93
Using the ND Filter.............................................................................................................................93
Reducing Moiré (AA Filter Simulator)..........................................................................................93
Setting the Image Atmosphere (Image Control).................................................................... 94
Correcting the Peripheral Illumination.......................................................................................96
Correcting a Range of Tones (D-Range Correction)............................................................... 97
Reducing Blurring of Images..........................................................................................................98
Correcting the Skew of Images..................................................................................................... 98
4 Playback Functions
99
Using the Playback Functions.........................................................................................99
Changing the Playback Method...................................................................................100
Displaying Multiple Images..........................................................................................................100
Displaying Rotated Images...........................................................................................................101
Connecting the Camera to an AV Device.................................................................................102
10
Organizing Files..................................................................................................................103
Deleting Files......................................................................................................................................103
Protecting Images from Deletion...............................................................................................105
Copying Images................................................................................................................................107
Setting the Transfer Reservation for Images...........................................................................109
Editing and Processing Images....................................................................................111
Developing RAW Images...............................................................................................................111
Changing the Image Size...............................................................................................................114
Correcting Highlight/Shadow Areas (Levels Adjustment).................................................116
Correcting the White Balance......................................................................................................118
Correcting Color Moiré...................................................................................................................119
Adjusting the Image Quality........................................................................................................120
Editing Movies...................................................................................................................................121
5 Sharing Images
123
Using the Camera with a Computer...........................................................................123
Using the Camera with a Communication Device................................................124
Connecting the Camera to a Communication Device........................................................125
Setting Functions Linked with the Communication Device.............................................128
6 Changing the Settings
129
Saving Frequently Used Settings.................................................................................129
Saving the Current Settings..........................................................................................................129
Using the Setting Boxes.................................................................................................................131
Using the User Mode.......................................................................................................................133
Customizing the Button Functions.............................................................................134
Changing the Dial Operation for the Exposure Mode........................................................134
Registering Functions to the ADJ. Mode..................................................................................134
Changing the Functions of the Fn Button...............................................................................136
Setting the Operation of the Shutter Release Button.........................................................139
Selecting the Settings to Save in the Camera.........................................................140
Display and Sound Settings...........................................................................................141
Setting the Information Displayed During Shooting/Playback.......................................141
Setting the Instant Review Display............................................................................................142
Setting the Live View Display.......................................................................................................143
Setting the Brightness and Tone of the Monitor...................................................................143
Setting the Lamp..............................................................................................................................144
Setting the Sound Effects..............................................................................................................145
Power Saving Settings.....................................................................................................146
Automatically Turning the Power Off........................................................................................146
Dimming the Display......................................................................................................................147
11
File Management Settings.............................................................................................148
Specifying the Folder/File Settings............................................................................................148
Setting the Copyright Information.............................................................................................153
7 Appendix
155
Attaching Optional Accessories...................................................................................155
Conversion Lens/Lens Adapter....................................................................................................155
Troubleshooting................................................................................................................156
Power Supply.....................................................................................................................................156
Shooting..............................................................................................................................................157
Playback/Deletion............................................................................................................................160
Others...................................................................................................................................................162
Error Messages...................................................................................................................................163
Main Specifications...........................................................................................................166
Camera.................................................................................................................................................166
Rechargeable Battery DB-120......................................................................................................173
Image Storage Capacity.................................................................................................................173
Operating Environment.................................................................................................................175
Using the Camera Abroad..............................................................................................176
Precautions for Use...........................................................................................................177
Camera Care and Storage...............................................................................................179
Warranty Policy..................................................................................................................180
Regulatory Compliance Statements...........................................................................183
Index......................................................................................................................................196
12
Introduction
Checking the Contents of the Package
RICOH GR IV
Hot shoe cover
(Installed on the camera)
USB cable (I-USB198)
Hand strap
g Start Guide
g
g
13
Rechargeable battery
(DB-120)
1
Introduction
Before using your digital camera, confirm that the package contains the
items listed below.
Names and Functions of the Working Parts
Power button lamp
1
Introduction
AF assist light / Self-timer lamp
Hot shoe
Strap eyelet
Microphone
Microphone
Lens
Status lamp
Strap eyelet
Monitor
Terminal cover
USB (USB Type-C)/
video output terminal
14
Speaker
1
Strap eyelet
Tripod screw hole
Battery/card cover
Release lever
15
Introduction
Ring cap
Operating Controls
This section explains about operating controls.
The icons in parentheses are used in the descriptions of this manual.
1 2 3 4 5
1
Introduction
6
7 8
13
14
15
16
17
9 10
1
Front e-dial (p)
2
Changes the values for camera settings such as exposure.
(p.52)
Magnifies images in the playback
mode. (p.50)
Moves the cursor up and down
on the menu screen or image
selection screen.
3
16
11 12
Lock button
Allows the mode dial to be turned
when pressed.
Mode dial
Changes the exposure mode.
(p.52)
4
5
8
9
Displays the white balance setting
screen. (p.76)
Moves the cursor down when an
item is selected.
Power button
Turns the power on or off. (p.44)
Movie/Save destination memory switching button (k/7)
Switches between the still picture
mode and the movie mode.
(p.57)
Switches the save destination
memory when pressed and held.
(p.41)
7
11 White balance/Down button
(t/b)
12 DISP button (j)
Switches the information
displayed on the shooting screen
and playback screen. (p.20)
Magnifies the Live View image
when pressed and held in the
shooting mode. (p.49)
13 EV Compensation button (6)
Performs exposure compensation. (p.52)
Switches the display in the playback mode. (p.100)
Moves the cursor up and down
or increase/decreases the setting
value on the menu screen.
Fn/Delete button (h/i)
Calls the assigned function.
(p.23)
Deletes images in the playback
mode. (p.50)
ADJ./Rear e-dial (n/q)
Changes the values for camera settings such as exposure.
(p.52)
Switches to the ADJ. mode when
pushed in during the shooting
mode. (p.24)
Moves the cursor right and left
and confirms the selected items
when pushed in on the menu
screen or image selection screen.
14 Macro/Up button (s/a)
ISO/Left button (u/c)
16 Drive/Right button (v/d)
Changes the ISO sensitivity. (p.69)
Moves the cursor to the left when
an item is selected.
10 MENU button (f)
Displays the menu screen.
Returns to the previous screen
when pressed while the menu is
displayed. (p.25)
Switches to the macro mode.
(p.65)
Moves the cursor up when an
item is selected.
15 Playback button (g)
Switches between the shooting
mode and the playback mode.
(p.50)
Displays the drive mode setting
screen. (p.80)
Moves the cursor to the right
when an item is selected.
17 OK button (e)
Confirms the selected items on
the menu screen, etc.
17
1
Introduction
6
Shutter release button (z)
Shoots images.
Activates autofocus when pressed
halfway. (p.48)
Indicators on the Monitor
Shooting Screen
1
1 234 5
Introduction
16
17
18
6 7 8 910 1112 13 14 15
99999
1.5m
G1B1
19
20
21
Press & Hold
1/400 F5.6
30 31 32 33
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
102400
34
38
22
23
24
25
26
27
28
29
EV-2.0
35 36
39
0:58´58˝
1.5m
G1B1
EV-2.0
37
Still image
Movie
Drive (p.80)
Shake Reduction / Movie SR
(p.98) / Auto Horizon Correction (p.98)
Focus mode (p.60)
White Balance (p.75)
Image Control (p.94)
AE Metering (p.67)
Flash Mode (p.71)
GPS positioning status (p.128)*
Bluetooth® communication
(p.125)
Wireless LAN communication
(p.125) / Airplane Mode (p.127)
Temperature warning
Snap Focus Distance (p.60)
File Format / JPEG Recorded
Pixels (p.91)
Number of storable images
Save destination (p.41)
Self-timer (p.89)
Grid Guide (p.141)
Macro Mode (p.65)
Focus bar / Depth of field (p.64)
20 AF Point Change Priority / Direct
Key Priority (p.63)
21 Exposure mode (p.52)
22 Full Press Snap (p.66)
23 Crop (p.92)
24 Conversion lens (p.155)
25 ND Filter (p.93)
26 Focus frame (p.49)
27 Electronic Level (p.141)
28 AA Filter Simulator (p.93)
29 Histogram (p.141)
30 Front e-dial
31 Shutter speed (p.52)
32 Operation guide
33 Aperture value (p.52)
34 ISO sensitivity (p.69)
35 EV Compensation button
36 Exposure indicator / Exposure
compensation (p.52)
37 Battery level (p.20)
38 Recording indicator
39 Recording time / Remaining
recording time
18
Playback Screen
1
2345 6
7
8
99998 /99999
08/08/2025 10:00
9998/9999
08/08/2025 10:00
1
1
2
3
4
5
6
7
8
9
1/2000 F5.6
250
EV+0.7
10 11 12 13
14
15 16
999-9999
00´ 20˝
17
5
18
18
Still image
Movie
Shooting date and time
Protect (p.105)
GPS information (p.128)
Bluetooth® communication
(p.125)
Wireless LAN communication
(p.125)
File Format / JPEG Recorded
Pixels (p.91)
Current file / Total files
Playback source memory
(p.51)
Histogram (p.141)
10 Folder number / File number
(p.148)
11 Image transfer status (p.109)
12 Shutter speed
13 Aperture value
14 ISO sensitivity
15 Exposure compensation
16 Battery level (p.20)
17 Length of time of the recorded
movie / Elapsed time
18 Operation guide
Memo----------------------------------------------------------------------------------• “GPS positioning status” (No. 8 on the shooting screen) is displayed when
[Store Location Info.] of [Smartphone Link] is set to [On] in the E6 menu
and the camera is linked with a communication device. (p.128)
19
Introduction
9
100-0630
Battery Level
The icon display changes depending on the battery level.
The battery level is sufficient.
1
The battery level started to drop.
Introduction
The battery level is low. Charge the battery.
The camera will turn off soon.
There is a problem with the battery.
Changing the Screen Display
Press j to switch the information displayed on the screen.
Shooting Mode
The information displayed on the shooting screen can be switched.
Standard Info. Display Displays all the information.
Simplified Info.
Display
Displays only the information regarding the exposure,
AE lock, autofocus frame, and MF operation guide.
No Information
Display
Displays the information only when camera settings
are changed. Autofocus frame is displayed during
range-finding.
Display Off
Does not display the autofocus frame and Live View but
the information when the camera settings are changed.
Memo----------------------------------------------------------------------------------• You can specify the displayed information in [Shooting Info. Display] in the
D3 menu. (p.141)
20
Playback Mode
You can switch the displayed information between [Standard Info. Display],
[Detailed Info. Display], and [No Information Display] in single image display.
Use ab or flick up and down to switch the page in [Detailed Info. Display].
99998 /99999
08/08/2025 10:00
AUTO
100-0630
1.5m
50.0mm
G1A1
0
0
0
0
0
0
0
0
0
1 R+200%:G-100%:B-100%
1/2000 F5.6 102400 EV+0.7
08/08/2025 10:00
a
1
99998 /99999
MY GR IV
Introduction
6192x4128
00:00´23˝
10
XXXXXXXXXXX
42m
N 35°
E138°
b
100-0630
1/2000 F5.6
08/08/2025
10:10:01
102400 EV+0.7
Memo----------------------------------------------------------------------------------• You can specify the displayed information in [Playback Info. Display] in the
D3 menu. (p.141)
• For movies, [Histogram], [Grid Guide], and [Highlight Alert] are not displayed.
Using the Touch Screen
You can use the touch screen to select functions, set the AF point for shooting, and perform other operations.
When not using the touch screen function, LCD Touch Operation
set [LCD Touch Operation] to [Off ] in the D2 On
Off
menu.
Cancel
21
OK
How to Change Function Settings
Using the Buttons and Dial
1
Using the Direct Keys
Introduction
You can perform the following functions quickly by
pressing abcd in the shooting mode.
a (s)
Macro Mode (p.65)
b (t)
White Balance (p.75)
c (u)
ISO Setting (p.69)
d (v)
Drive Mode (p.80)
Memo----------------------------------------------------------------------------------• The functions mentioned above can also be set from the A menu by
pressing f.
• The function of b, c, and d can be changed in [Fn Button Setting] in the
D2 menu. (p.136)
22
Using the Fn Button
You can activate the assigned function by
pressing h in the shooting mode. By default,
[AF+AE Lock] is assigned.
1
• The function of h can be changed in [Fn Button Setting] in the D2
menu. (p.136)
100
• When the power is turned on or the mode
dial is turned, the current function of the
button is displayed for three seconds. If
AF+AE Lock
[Guide Display] is set to [Off ] in the E2
ISO Setting
Drive Mode
menu, the function is not displayed.
White Balance
Still/Movie
Switch Record Memory
1/400 F5.6
400
23
Introduction
Memo-----------------------------------------------------------------------------------
Using the ADJ. Mode
You can easily recall the assigned functions by pressing n (q) in the
shooting mode.
1
1 Press n in the shooting mode.
Introduction
The camera enters the ADJ. mode and the
symbol for the assigned function appears.
2 Use cd to select a function.
Image Control
Vivid
By default, the following functions can be
selected.
• Image Control (p.94)
• Focus (p.60)
• AE Metering (p.67)
• File Format (p.91) (“Framerate” for the
B mode)
• Aspect Ratio (p.91) (“Outdoor View Setting” for the B mode)
OK
3 Use ab to select a setting.
To make detailed settings, press h.
4 Press e.
The selected function is set and the camera is ready to perform shooting.
Memo----------------------------------------------------------------------------------• The functions for ADJ. mode can be changed in [ADJ Mode Setting] in the
D2 menu. (p.134)
• When [Shutter Btn. Confirmation] is set to [On] in the D2 menu, pressing
z halfway completes the setting of ADJ. mode. (p.139)
24
Using the Menus
You can set most functions from the menus.
1 Turn the camera on.
Refer to “Turning the Camera On” (p.44) for how to turn the camera on.
The A1 menu appears.
Introduction
2 Press f.
Focus Settings
Focus
Face/Eye Detection
Macro Mode
Focus Limiter
Snap Focus Distance
Full Press Snap
AF Assist Light
3 When changing the menu type, press
2.5m
On
Setup
c twice, and then use ab to select
a type.
Format
You can use p instead of ab, and q
instead of cd to move the cursor.
File Name
Sequential Numbering
Reset Numbering
Create New Folder
Folder Name
RICOH
R0
Copyright Information
A
Still Image Settings menus (p.28)
B
Movie Settings menus (p.31)
C
Playback Settings menus (p.32)
D
Customize Settings menus (p.34)
E
Setup menus (p.37)
4 Press d twice.
5 Use ab to select a function.
Each menu type has a maximum of 11
categories.
Press 6 to switch pages.
Press c then ab to switch categories.
File Setting
Format
Create New Folder
Folder Name
File Name
Sequential Numbering
Reset Numbering
Copyright Information
25
1
RICOH
R0
6 Find a function to set and press d.
Indicator Lamps
Power Button Lamp
The settings for the selected function are
displayed.
Count Down
Sound Effects
Volume
Wireless Communication
Airplane Mode
1
Introduction
7 Use ab to select a setting, and then
press e or n.
The screen in Step 5 reappears.
Press f to return to the previous screen.
When you have finished setting, press f
several times to return to previous screens.
On
On
2
On
Off
Smartphone Link
Power Button Lamp
On
Off
Cancel
OK
Memo----------------------------------------------------------------------------------• When f is pressed, the last used menu screen appears first. To display
the most appropriate menus for the camera settings at that time, set [Store
Cursor Position] to [Off ] in the E2 menu.
Reseting the Settings
The settings are saved even after the power is turned off. To reset the settings, perform the following operations.
1 Select [Reset] in the E11 menu, and then press d.
2 Select [Reset Settings] or [Reset to Factory Default], and then
press d.
When [Reset Settings] is selected, proceed to the next Step.
When [Reset to Factory Default] is selected and executed, all the functions
are reset to the factory settings and all images saved in the internal memory
are deleted. When this is selected, proceed to Step 7.
26
3 Press d.
Reset Settings
Select items to reset.
The [Reset Item] screen appears.
Reset Item
1
Execute Reset
Introduction
4 Use n to turn each menu type on
Reset Item
or off.
Still Image Settings
Movie Settings
Playback Settings
Customize Settings
Setup
The menu types turned off are not reset.
Cancel
OK
5 Press e.
The screen in Step 3 reappears.
6 Select [Execute Reset], and then press e.
7 Select [Execute], and then press e.
The selected menu types are reset.
Memo----------------------------------------------------------------------------------• For each function, you can select whether to save the settings or reset
them when the camera is turned off. Make settings in [Memory] in the
D2 menu. (p.140)
27
Menu List
The following menus are available. (The underlined settings and the
square-bracketed settings are the default settings.)
1
A Still Image Setting Menus
Introduction
Still Image Settings
Focus
Face/Eye Detection
Macro Mode
Focus Limiter
Snap Focus Distance
Full Press Snap
AF Assist Light
2.5m
On
A1 Focus Settings
Focus
Auto-area AF, Zone Select AF, Select AF,
Pinpoint AF, Tracking AF, Continuous AF, MF,
Snap, Z
p.60
Face/Eye Detection
On, Use only in Auto-area AF, Off
p.62
Macro Mode
On, Off
p.65
Focus Limiter
Near Side, Far Side, Off
p.62
Snap Focus Distance
0.3m, 1m, 1.5m, 2m, 2.5m, 3.5m, 5m, Z
p.60
Full Press Snap
On, Off
p.66
AF Assist Light
On, Off
p.61
Focus Peaking
On, Off
p.61
AF.C Setting
Focus-priority, FPS-priority
p.60
MF Auto Magnification
On, Off
p.64
28
A2 Exposure Setting
Exposure Mode
Program AE, Aperture Priority AE, Shutter
p.133
Priority AE, Snap Distance Priority AE, Manual
Exposure
AE Metering
Multi-segment, Center-weighted, Spot,
Highlight-weighted
p.67
1
ISO Setting
ISO Setting: AUTO, 100 to 204800
ISO Auto Upper Limit: From one setting
higher than the lowest ISO sensitivity to the
highest ISO sensitivity [12800]
ISO Auto Lower Limit: From the lowest ISO
sensitivity to one setting lower than the
highest ISO sensitivity [100]
Minimum Shutter Speed: 1 to 1/1000 sec.
[1/30]
p.69
Introduction
Flash Mode
Flash Mode: Flash On, Flash On+Red-eye,
Slow-speed Sync, Slow Sync+Red-eye
Flash Output: AUTO, 1/1, 1/4
p.71
Program Line
Normal, DOF Priority (Shallow), DOF Priority
(Deep)
p.55
ND Filter
Auto, On, Off
p.93
Auto EV Compensation On, Off
p.54
Link AE and AF Point
p.68
On, Off
A3 Shooting Settings
Still/Movie
Still Image, Movie
p.57
Drive Mode
Drive: Single Frame Shooting, Continuous
Shooting, Bracketing, Multi-exposure, Interval Shooting, Interval Composite
Self-timer: 10sec., 2sec., Off
p.80
AA Filter Simulator
High, Low, Off
p.93
29
A4 Image Capture Settings
1
Introduction
Shooting Memory
Setting
Internal Memory Priority, Memory Card
Priority
p.90
File Format
JPEG, RAW, RAW+JPEG
p.91
Aspect Ratio
3:2, 4:3, 1:1, 16:9
Crop
Off, 35mm, 50mm
JPEG Recorded Pixels
L, M, S, XS
Color Space
sRGB, AdobeRGB
A5 Image Process Settings
White Balance
Auto White Balance, Auto WB (Warmth Pri.), p.75
Auto WB (White Pri.), Daylight, Shade, Cloudy,
Fl. - Daylight Color, Fl. - Daylight White, Fl. Cool White, Fl. - Warm White, Tungsten, CTE,
Manual White Balance, Color Temperature,
Custom 1 to 3
Image Control
Standard, Vivid, Monotone, Soft Monotone,
Hard Monotone, Hi-Contrast B&W, Negative
Film, Positive Film, Cinema (Yellow), Cinema
(Green), Cross Processing, Bleach Bypass,
Retro, HDR Tone, Custom 1 to 3
p.94
Peripheral Illumin. Corr. On, Off
p.96
D-Range Correction
Highlight Correction: Auto, On, Off
Shadow Correction: Auto, Low, Medium,
High, Off
p.97
Noise Reduction
Slow Shutter Speed NR: Auto, On, Off
High-ISO Noise Reduction: Auto, Low, Medium, High, Custom, Off
p.73
Shake Reduction
On, Off
p.98
Auto SR Off
Enable Auto SR Off, Disable Auto SR Off
p.98
Horizon Correction
On, Off
p.98
A6 Shooting Assist
30
B Movie Settings Menus
Movie Settings
Focus
Macro Mode
Focus Limiter
Snap Focus Distance
2.5m
MF Auto Magnification
Off
AE Metering
B1 Focus Settings
Focus
AF, MF, Snap, Z
p.60
Macro Mode
On, Off
p.65
Focus Limiter
Near Side, Far Side, Off
p.62
Snap Focus Distance
0.3m, 1m, 1.5m, 2m, 2.5m, 3.5m, 5m, Z
p.60
Focus Peaking
On, Off
p.61
MF Auto Magnification
On, Off
p.64
AE Metering
Multi-segment, Center-weighted, Spot,
Highlight-weighted
p.67
ND Filter
On, Off
p.93
Still Image, Movie
p.57
B2 Exposure Setting
B3 Shooting Settings
Still/Movie
B4 Movie Capture Settings
Shooting Memory
Setting
Internal Memory Priority, Memory Card
Priority
p.90
Framerate
60p, 30p, 24p
p.92
Sound Recording
On, Off
31
1
Introduction
Focus Peaking
B5 Image Process Settings
White Balance
Auto White Balance, Auto WB (Warmth
Pri.), Auto WB (White Pri.), Daylight, Shade,
Cloudy, Fl. - Daylight Color, Fl. - Daylight
White, Fl. - Cool White, Fl. - Warm White,
Tungsten, CTE, Manual White Balance, Color
Temperature, Custom 1 to 3
Image Control
Standard, Vivid, Monotone, Hard Monotone, p.94
Hi-Contrast B&W, Negative Film, Positive
Film, Cinema (Yellow), Cinema (Green), Cross
Processing, Bleach Bypass, Retro, Custom
1 to 3
1
p.75
Introduction
Peripheral Illumin. Corr. On, Off
p.96
D-Range Correction
Highlight Correction: Auto, Off
Shadow Correction: Auto, Low, Medium,
High, Off
p.97
On, Off
p.98
B6 Shooting Assist
Movie SR
C Playback Settings Menus
Playback Settings
Select Playback Memory
Auto Image Rotation
Playback Order Options
Playback Sound Volume
Delete
On
10
Protect
Image Rotation
C1 Playback Settings
Select Playback
Memory
Internal Memory, Memory Card
p.51
Auto Image Rotation
On, Off
p.101
Playback Order Options File No., Shooting Date/Time
p.101
Playback Sound Volume 0 to 20 [10]
p.59
32
C2 File Management
Delete
Delete 1 Image, Delete All Images
p.103
Protect
Protect 1 Image, Protect All Images
p.105
90° to left, 180°, 90° to right
p.101
Copy 1 Image, Copy All Images
p.107
File Transfer
Transfer 1 Image
p.109
C3 Image Edit
RAW Development
JPEG Recorded Pixels, Aspect Ratio, Color
p.111
Space, White Balance, Image Control, Peripheral Illumin. Corr., Sensitivity, High-ISO Noise
Reduction, Shadow Correction
Resize
—
p.114
Cropping
—
p.115
Levels Adjustment
—
p.116
WB Adjustment
—
p.118
Color Moiré Correction
Low, Medium, High
p.119
Base Parameter Adj
Brightness, Saturation, Filter Effect, Hue,
Toning, Contrast, Sharpness
p.120
Movie Edit
Cut, Divide
p.121
33
1
Introduction
Image Rotation
Image Copy
D Customize Settings Menus
Customize Settings
Assign User Mode Dial
Save User Mode Box
Load User Mode Box
Rename User Mode
Clear User Mode Assign.
Exposure Setting
1
Introduction
ADJ Mode Setting
D1 User Mode
Assign User Mode Dial
—
p.129
Save User Mode Box
—
p.131
Load User Mode Box
—
p.132
Rename User Mode
—
p.130
Clear User Mode
Assign.
—
p.130
D2 Customize Controls
Exposure Setting
P, Av, Tv, Sn, M
ADJ Mode Setting
Off, Focus [Setting2], Focus Limiter, Snap
p.134
Focus Distance, File Format [Setting4], Aspect
Ratio [Setting5], Crop, JPEG Recorded Pixels,
AE Metering [Setting3], ISO Setting, Flash
Mode, Flash Output, Drive, Self-timer, White
Balance, Image Control [Setting1], One
Push AE in M Mode, Touch AF, Outdoor View
Setting, Framerate
34
p.134
Fn Button Setting
Shutter Button Setting
AF+AE Lock, AE Lock, Enable AF
p.139
4-way Controller
Direct Key Priority, AF point change Priority
p.63
Shutter Btn. Confirmation
On, Off
p.139
LCD Touch Operation
On, Off
p.21
Touch AF
AF Point, AF Point+Focus, AF Point+Focus+
Shoot, Full Press Snap, Off
p.55
Memory
ISO Setting, EV Compensation, Program Auto p.140
Ex, Focus, Macro Mode, Focus Limiter, Focus
Peaking, AE Metering, Flash Mode, Flash
Output, Still/Movie, Drive, Self-timer, AA Filter
Simulator, Aspect Ratio, Crop, White Balance,
Image Control, ADJ Mode Setting, Shooting
Info. Display, Playback Info. Display, Image for
Playback, Outdoor View Setting
35
1
Introduction
p.136
Off, Focus, Set MF, Set Snap, Set Tracking
AF, Enable AF, AF+AE Lock [Fn Button], AE
Lock, Face/Eye Detection, Focus Limiter,
Snap Focus Distance, Switch Record Memory
[Hold Movie Button], File Format, JPEG Ž
RAW, JPEG Ž RAW+, Aspect Ratio, Crop,
JPEG Recorded Pixels, Framerate, Still/Movie
[Movie Button], AE Metering, ISO Setting [ISO
Button], Flash Mode, Flash Output, ND Filter,
Drive Mode [Drive Button], Drive, Continuous
Shooting, Self-timer, White Balance [White
Balance Button], Image Control, Shake
Reduction, One Push AE in M Mode, 4-way
Controller Action, Touch AF, Outdoor View
Setting, Enable Sleep Mode, Airplane Mode,
Preview
Focus Settings: Same as Shutter Button, Auto-area AF, Zone Select AF, Select AF, Pinpoint
AF, Tracking AF, Continuous AF
Keep AE Lock: On, Off
One Push AE in M Mode: Program AE, Aperture Priority AE, Shutter Priority AE
D3 Display Customization
1
Introduction
Shooting Info. Display
Standard Info. Display, Simplified Info. Display, No Information Display, Display Off
Playback Info. Display
Standard Info. Display, No Information
Display
Instant Review
Display Time: 0.5sec., 1sec., 2sec., 3sec., Hold, p.142
Off
Zoom Review: On, Off
Delete: On, Off
Quick Zoom
x4, x8, x16, 100%
Focus Magnification
On, Off
p.51
Grid Style
3x3 Grid, 4x4 Grid
p.143
Electronic Level Type
Level+Tilt, Level
Electronic Level Design Type1, Type2, Type3
Flicker Reduction
50Hz, 60Hz
36
p.141
E Setup Menus
Setup
Format
Create New Folder
Folder Name
RICOH
R0
Copyright Information
E1 File Setting
Format
Memory Card, Internal Memory
p.46
Create New Folder
—
p.148
Folder Name
Folder Name: Date, Optional
A freely defined string of characters [RICOH]
p.149
File Name
Still Image: A freely defined string of two
characters [R0]
Movie: A freely defined string of two characters [R0]
p.151
Sequential Numbering
Folder & File, File, Off
p.152
Reset Numbering
—
p.152
Copyright Information
Embed Copyright Data: On, Off
Copyright Holder: A freely defined string of
32 characters
p.153
Store Cursor Position
On, Off
p.26
Guide Display
On, Off
p.23
Animation Setting
On, Off
p.51
End Screen
Type1, Type2
p.44
LCD Setting
Brightness: -7 to +7
Saturation: -7 to +7
Adjust: Blue-Amber: -7 to +7
Adjust: Green-Magenta: -7 to +7
p.143
Outdoor View Setting
Auto, +2, +1, OFF, -1, -2
p.144
E2 Display Settings
E3 LCD Setting
37
1
Introduction
File Name
Sequential Numbering
Reset Numbering
E4 Indicator Lamps
1
Power Button Lamp
On, Off
Count Down
On, Off
p.144
E5 Sound Effects Setting
Introduction
Sound Effects
All, Shutter Sound Only
Volume
0 to 3 [2]
p.145
E6 Wireless Connection
Wireless Communication
Action Mode: On, Off
Pairing: Execute Pairing, Paired Devices
Communication Info.
p.125
Airplane Mode
On, Off
p.127
Smartphone Link
Store Location Info.: On, Off
Auto Image Transfer: Auto Image Transfer,
Transfer File Format
Auto Resize: On, Off
Image Transfer while Off: On, Off
p.128
USB Setting
Image Display, License Display
p.124
E7 Power Supply Settings
Auto Power Off
1min., 3min., 5min., 10min., 30min., Off
p.146
Sleep Mode
3sec., 10sec., 30sec., 1min., 3min., 5min.,
10min., 30min., Off
p.147
LCD Auto Dim
On, Off
E8 About This Device
Camera Information
—
—
Certification Marks
—
p.3
E9 Sensor Maintenance
Pixel Mapping
—
p.160
Dust Removal
Execute Dust Removal
Startup Action: On, Off
Shutdown Action: On, Off
p.160
38
E10 Language/Date Setting
Language/H
p.45
Date Format: Y/M/D, D/M/Y, M/D/Y
Date: January 1, 2025 to December 31, 2074
Time: 00:00 to 23:59
p.46
Reset Settings: Reset Item, Execute Reset
Reset to Factory Default
p.26
1
E11 Reset
Reset
39
Introduction
Date Adjustment
English, French, German, Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Greek,
Russian, Thai, Korean, Traditional Chinese,
Simplified Chinese, Japanese
Getting Started
Setting the Battery and a Memory Card
2
Inserting the Battery and a Memory Card
Getting Started
The camera can save images to its internal memory.
When using a memory card, commercially available microSD memory cards,
microSDHC memory cards, and microSDXC memory cards can be used.
“Memory card” refers to these memory cards in this manual.
1 Make sure that the camera power is off.
2 Slide the release lever on the bottom
of the camera toward OPEN to open
the battery/card cover.
1
2
3 When using a memory card, make
sure that the memory card is facing
the right way and then push it all the
way in until it clicks.
To remove the memory card, push it in and
then release your hand.
4 Insert the battery.
Use the battery to press the latch and insert
the battery all the way into the battery
compartment.
To remove the battery, slide the latch.
40
5 Close the battery/card cover and
slide the release lever in the opposite
direction of OPEN to lock it in place.
1
2
2
Data Save Location
1/400
F5.6
400
Caution--------------------------------------------------------------------------------• Avoid touching the microSD card terminal directly with your hands or fingers.
Memo----------------------------------------------------------------------------------• When a memory card is inserted, the data save method can be set. (p.90)
• Saved images can be copied between the internal memory and the memory card. (p.107)
• The storage capacity varies depending on the memory card. (p.173)
41
Getting Started
Data is saved according to the setting of [Shooting Memory Setting] in the
A4/B4 menu.
Press and hold k (7) before shooting to switch the save destination.
The save destination can be checked in the up9999
per right corner of the monitor.
Charging the Battery
Charge the provided rechargeable battery (DB-120) before using the camera.
Charge the battery using one of the following methods.
Using the Battery Charger
2
Getting Started
You can charge the battery using the optional battery charger (BJ-12).
For how to charge the battery, refer to the user’s manual of the battery charger.
Using an AC Adapter
You can charge the battery using a commercially available AC adapter compatible with USB Power Delivery in combination with the provided USB cable (I-USB198) or the optional AC adapter (K-AC166).
Memo----------------------------------------------------------------------------------• When a commercially available AC adapter compatible with USB Power
Delivery or the optional AC adapter (K-AC166) is connected and the camera is turned on, you can perform shooting and play back images using
power supplied via the AC adapter.
• The camera is compatible with USB Power Delivery, but is not certified
with the USB Implementers Forum logo.
Using a Computer
You can charge the battery using the provided USB cable (I-USB198) and a
computer with a USB Type-C port.
1 Turn the camera off.
2 Open the terminal cover, and then
connect the USB cable to the USB
terminal.
3 Connect the USB cable to the USB Type-C port of the computer.
The camera turns on and enters the playback mode.
42
4 Press the power button to turn the camera off.
The status lamp of the camera turns on and charging starts.
When charging is complete, the status lamp turns off.
5 Remove the USB cable from the USB terminal, and close the
terminal cover.
Caution---------------------------------------------------------------------------------
Storage Capacity--------------------------------------------------------------------• Approx. 250 images can be taken when the battery is fully charged.
• This is based on tests conducted according to CIPA standards under the
following conditions: At 23°C (73°F) temperature; the monitor is on; an image is taken every 30 seconds; the camera is turned off and back on after
10 images are taken.
• The storage capacity is for reference. For long periods of use, it is recommended that you carry spare batteries.
43
2
Getting Started
• Use only genuine rechargeable battery (DB-120).
• If the battery starts to run down more quickly even after being charged,
the battery has reached the end of its service life. In this case, replace the
battery with a new one.
• The battery may become very hot immediately after operation. Turn the
camera off and leave it to cool down sufficiently before removing the battery.
• If the camera is turned on while charging, the charging stops.
• When a computer that does not support USB Power Delivery is used,
charging may take a long time.
Initial Settings
Turn the camera on and make the initial settings.
Turning the Camera On
2
1 Press the power button.
Getting Started
The power button lamp turns on, and then
the status lamp blinks for several seconds.
The first time the camera is turned on after
purchase, the [Language/H] screen
appears.
When the power button is pressed again, the
power turns off.
Turning the Camera On in the Playback Mode-------------------------------• When g is pressed and held with the camera turned off, the camera turns
on in the playback mode.
The following operations are available.
g
Turns the camera off
z (halfway)
Switches the camera to the shooting mode.
Memo----------------------------------------------------------------------------------• The power button lamp can be set to [Off ] in [Power Button Lamp] in the
E4 menu. (p.144)
• If no operations are made for about one minute (default setting), the camera turns off automatically to suppress battery drain. The power saving
function can be set in the E7 menu. (p.146)
• The number of images taken on the day (except the deleted images), the
total number of images taken since you started using the camera, and the
firmware version of the camera are displayed when the power is turned off.
To display only the number of images taken on the day, set [End Screen] to
[Type1] in the E2 menu.
44
Setting the Language, Smartphone Linkage, and Date/
Time
You can set the display language for menus and the date and time, and pair
the camera with a communication device via Bluetooth®.
1 Use ab to select a language, and then press e.
2 Press e.
Smartphone Linkage
[Wireless Communication] turns [On] in the
E6 menu and the app installation guide
screen appears.
Links the camera to a smartphone.
Wireless communication settings are
turned on.
Execute Linkage
Cancel
3 Read the displayed two-dimensional
code with a communication device
such as a smartphone and install
the RICOH GR series dedicated app
“GR WORLD” to the communication
device.
OK
Install and start GR WORLD.
OK
4 Press e of the camera.
5 Use the app to register the camera.
The camera and the communication device are paired.
6 Press e of the camera.
The [Date Adjustment] screen appears.
Register this camera as a new camera
in GR WORLD.
OK
45
2
Getting Started
The selected language is set and the [Smartphone Linkage] screen appears.
If you do not want to link the camera with a communication device or want
to link it later, press f to proceed to Step 7.
7 Set the display format and the date
and time.
Use cd to select an item and ab to
change the value.
Press f to cancel the setting.
2
Date Adjustment
Set the Date Format,
Date and Time.
M/D/Y
01
/ 01 / 2025
00 / 00
Cancel
8 Press e.
OK
Getting Started
The date and time are set and the camera is ready to perform shooting.
Memo----------------------------------------------------------------------------------• If the battery is removed for about five days, the date and time settings will
be lost. To retain the date and time settings, insert a battery with sufficient
power for at least two hours, and then remove the battery.
• You can change the language and the date and time settings in the E10
menu.
• For how to link the camera with a communication device later or for details
on the app functions, refer to “Using the Camera with a Communication
Device” (p.124).
Formatting a Memory Card
When using a new memory card or a memory card used with another device, format the memory card with this camera. The internal memory can
also be formatted.
1 Press f.
The menu appears.
2 Press c twice, and then use ab to
select E.
Setup
Format
Create New Folder
Folder Name
File Name
Sequential Numbering
Reset Numbering
Copyright Information
46
RICOH
R0
3 Press d twice, select [Format], and
then press d.
File Setting
Format
Create New Folder
Folder Name
File Name
Sequential Numbering
Reset Numbering
RICOH
R0
Copyright Information
[Internal Memory], and then press d.
The confirmation screen appears.
5 Use a to select [Execute], and then
press e.
The memory is formatted and the screen in
Step 4 reappears.
2
Format
Memory Card
Getting Started
4 Use ab to select [Memory Card] or
Internal Memory
All data in Memory Card
will be deleted.
Execute
Cancel
OK
6 Press f twice.
The shooting screen reappears.
Caution--------------------------------------------------------------------------------• Do not remove the memory card while formatting, or the card may be
damaged.
• Formatting deletes all data, both protected and unprotected.
Memo----------------------------------------------------------------------------------• When a memory card is formatted, the volume label “RICOH GR” is assigned to the card.
47
Basic Shooting Operation
Shooting in the Program Mode
You can perform shooting in the Program AE mode that automatically sets
an aperture value and shutter speed.
2
1 Set the mode dial to J while
Getting Started
pressing the lock button.
The exposure mode is set to [Program
AE] and the Live View is displayed.
2 Press z halfway.
100
Focus is adjusted, and exposure is set.
The distance is measured from up to 25
points and the green focus frame appears
for the area in focus.
3 Press z fully.
1/400
The image you have just captured is displayed on the monitor (Instant Review) and saved.
48
F5.6
400
Focus-----------------------------------------------------------------------------------Status lamp
• The status lamp and the color of the center
frame on the monitor show whether the
subject is in focus.
2
Focus Status
Frame Color
Status Lamp
Before focusing
White
Off
Subject in focus
Green
Green (on)
Unable to focus
Red
Green (blinks)
Live View Magnification-----------------------------------------------------------• The Live View image can be magnified.
The following operations are available.
j (pressed and Magnifies the Live View image.
held)
p
Switches the magnification between [x4] and [x16].
abcd / Slide
Moves the magnified area.
e
Resets to the entire image display.
• The image cannot be magnified during recording in the B mode.
Memo----------------------------------------------------------------------------------• You can set the display and operation of [Instant Review] that displays the
taken image immediately after shooting in the D3 menu. (p.142)
49
Getting Started
Focus frame
Viewing the Taken Images
You can view taken images on the monitor one by one.
1 Press g.
2
The camera switches to the playback mode
and the last image you took is displayed.
(Single image display)
Getting Started
2 View an image.
08/08/2025 10:00
100-0001
1/2000 F5.6
1 /1
250
The following operations are available.
cd / q / Flick
Displays the previous or next image.
i
Deletes the image. (p.103)
p (to the right) / Magnifies the image.
6 (+) / Pinch out
6 (–) / Pinch in
Displays the multi-image display screen. (p.100)
In magnified view: Reduces the image.
6
In magnified view: Changes the display magnification.
abcd / Slide
In magnified view: Moves the magnified area.
6 (+) / n /
Double-tap
Magnifies the image with the magnification ([x4], [x8],
[x16], [100%]) set in [Quick Zoom] in the D3 menu.
(p.142)
In magnified view: Returns to the single image display.
q
In magnified view: Displays the previous or next image
without changing the magnification.
e
In magnified view: Returns to the single image display.
j
Switches between [Standard Info. Display], [Detailed
Info. Display], and [No Information Display].
In magnified view: Switches between [Standard Info.
Display] and [No Information Display].
50
k / Tap and hold Displays the playback function selection screen
(p.99).
k (7) (pressed
and held)
Switches the memory to play back images.
g
Switches the camera to the shooting mode.
Memo-----------------------------------------------------------------------------------
51
2
Getting Started
• If [Focus Magnification] is set to [On] (default setting) in the D3 menu, the
image is magnified centering on the AF point set in shooting.
• Movies cannot be magnified.
• If the image is switched to the previous or next image by flicking the touch
screen, animation is displayed. The animation can be set to [Off ] in [Animation Setting] in the E2 menu.
Taking Images
Taking Still Pictures
Setting the Exposure Mode
You can set an aperture value or shutter speed for shooting.
3
1 Set the mode dial to J, K, L, M, or N.
Taking Images
The exposure mode and set values are
displayed on the shooting screen.
1/400
2 Use p, q, or 6 to change
values.
52
100
F5.6
800
The following values can be changed.
Exposure
Mode
p
q
6
Aperture value
Shutter speed
Exposure compensation
K
Aperture
Priority AE
Aperture value
—
Exposure compensation
L
Shutter Priority AE
—
Shutter speed
Exposure compensation
Depth of field
Exposure compensation
Shutter speed
When ISO AUTO is
set for the ISO sensitivity: Exposure
compensation
When the ISO
sensitivity value
is fixed: ISO sensitivity
M
Snap focus
Snap Distance
distance
Priority AE
N
Manual
Exposure
Aperture value
The exposure compensation can be set in the range of ±5.0 EV (±2.0 EV in
the B mode) in increments of 1/3 EV steps.
In the M mode, the snap focus distance and depth of field can be
adjusted. The focus mode is fixed to [Snap] (p.60) and the depth of field
can be selected from three levels.
100
In the N mode, the exposure indicator is
displayed. The exposure is correct when the
pointer of the exposure indicator is in the
center. When the exposure value is in the
range of ±2 EV, the indicator changes according to the exposure value. The indicator
color turns yellow when the exposure value
1/400 F5.6
800
is outside this range.
3 Shoot.
53
3
Taking Images
J
Program AE
Memo-----------------------------------------------------------------------------------
3
Taking Images
• When you change the aperture value or shutter speed in the J mode,
the exposure mode temporarily switches to the K/L mode (Program
Auto Ex). To return each value to its standard setting, press the lock button.
When switching the exposure modes or switching to the B mode, each
value also returns to its standard setting.
• If [Auto EV Compensation] is set to [On] in the A2 menu, the exposure
is automatically compensated when the correct exposure cannot be
achieved in the K or L mode.
• Pressing z halfway activates the autofocus and locks the exposure
value. To only lock the exposure value, set [Shutter Button Setting] to [AE
Lock] in the D2 menu. (p.139)
• The functions of p, q, and 6 when these are operated in each exposure
mode can be changed. (p.134)
Caution--------------------------------------------------------------------------------• The image is not displayed on the monitor during shooting.
• The exposure compensation is not available when the ISO sensitivity is set
to a fixed value in the N mode.
AE Lock--------------------------------------------------------------------------------• The exposure value is locked while z is pressed halfway, and the lock
is canceled when the button is released.
• The exposure value can also be locked with h by setting [Fn Button Setting] to [AF+AE Lock] or [AE Lock] in the D2 menu. By default, [AF+AE
Lock] is assigned to h. (p.136)
AF+AE Lock
Locks the focus and exposure value simultaneously.
The lock of the exposure value is canceled
when the button is released.
AE Lock
Locks the exposure value only.
When [Keep AE Lock] is set to [On] in [Fn
Button Setting] in the D2 menu, the lock of
the exposure value is kept even if the button
in released.
• The lock of the exposure value is not available if the ISO sensitivity is set
to a fixed value in the N mode, or if the shutter speed is set to B, T, or BT.
54
AF Using the Touch Screen--------------------------------------------------------• By default, only the AF point can be
changed using the touch screen. To perform autofocus and shooting using the
touch screen, set [Touch AF] in the D2
menu.
Touch AF
AF Point
AF Point+Focus
AF Point+Focus+Shoot
Full Press Snap
Off
Cancel
Sets the AF point to the touched point.
AF Point+Focus
Sets the AF point to the touched point and
performs autofocus.
AF Point+Focus+Shoot Sets the AF point to the touched point, and
performs autofocus and shooting.
Full Press Snap
Performs “Full Press Snap” shooting.
Off
Does not perform autofocus using the touch
screen.
When autofocus using the touch screen is enabled in the B mode, [AF
Point+Focus] is applied.
Program Line-------------------------------------------------------------------------• You can set the program line for the J mode to [DOF Priority (Shallow)] or
[DOF Priority (Deep)] in [Program Line] in the A2 menu.
Checking the Depth of Field------------------------------------------------------• When [Hold Movie Button] of [Fn Button Setting] is set to [Preview] in the
D2 menu, the preview function is available. (p.136) When you press and
hold k, the aperture is adjusted to the set aperture value, and you can
check the depth of field. It is canceled when k is released.
• During the preview, shooting cannot be performed and the aperture value
cannot be changed.
• When using the flash, the actual aperture value may differ from the preview.
• The preview function is for checking the depth of field, so the exposure
may not be appropriate.
• The preview function is not available in the B mode.
55
3
Taking Images
AF Point
OK
Long Exposure-----------------------------------------------------------------------• When the ISO sensitivity is set to a fixed
value in the N mode, the shutter speed
can be set to B, T, or BT.
100
BT
3
Shutter Speed
F5.6
800
5’00”
Operation
Taking Images
B
Bulb
The exposure continues while z is pressed,
and is canceled when the button is released.
T
Time
The exposure starts when z is pressed, and
ends when the button is pressed again.
BT
Bulb timer
The exposure start when z is pressed, and
ends after the set time has elapsed.
Use 6 to set the exposure time.
• B and T are available when [Drive Mode] is set to [Single Frame Shooting]
or [Multi-exposure], and BT is available when [Drive Mode] is set to [Single
Frame Shooting], [Multi-exposure], [Interval Shooting], or [Interval Composite].
Compensation to Correct Exposure in the N mode------------------------• When [One Push AE in M Mode] is registered in [Fn Button Setting] in the
D2 menu (p.136), pressing the button compensates the exposure to the
correct exposure. You can select the value to be prioritized for this compensation.
Program AE
Adjusts both the aperture value and shutter
speed.
Aperture Priority AE
Sets the aperture value to a fixed value and
adjusts the shutter speed.
Shutter Priority AE
Sets the shutter speed to a fixed value and adjusts
the aperture value.
When the ISO sensitivity is set to ISO AUTO or the shutter speed is set to B,
T, or BT, [M Mode Instant Push AE] does not operate.
56
Recording Movies
1 Press k.
The camera enters the B mode.
You can also switch the modes from [Still/
Movie] in the A3/B3 menu.
1:00´00˝
3
When [Focus] is set to [AF] in the B1 menu, press z halfway.
3 Press z fully.
Recording starts.
The recording time is displayed while
recording.
0:01´58˝
4 Press z again.
Recording stops.
Caution--------------------------------------------------------------------------------• When [Sound Recording] is set to [On] (default setting) in the B4 menu,
camera operation sounds are also recorded.
• If the internal temperature of the camera becomes high during recording,
recording may be terminated.
• The following functions are not available in the B mode.
• Flash
• Wireless LAN
57
Taking Images
2 Focus on the subject.
Memo-----------------------------------------------------------------------------------
3
Taking Images
• Movies are recorded in the J mode regardless of the mode dial setting.
The exposure compensation is possible.
• When [Touch AF] is enabled in the D2 menu, autofocus can be performed with the touch screen even during recording. (p.55)
• In the B mode, pressing z halfway does not lock the exposure value.
The exposure value is locked while h is pressed (default setting).
• You can record a movie continuously up to 4 GB or 25 minutes. Recording
stops when the memory card or internal memory becomes full. The maximum recording time per shooting depends on the capacity of the memory card. (p.175) Shooting may stop even before the maximum recording
time is reached.
• The remaining recording time is calculated based on the remaining memory capacity, so the change in time may not be constant.
• Use a memory card of Speed Class 6 or higher for recording movies.
• Use a fully charged battery, commercially available AC adapter compatible
with USB Power Delivery, or optional AC adapter (K-AC166).
• When the setting of [Movie Button] has been changed in [Fn Button Setting] (p.136) in the D2 menu, switch the camera to the B mode from
the A3/B3 menu.
58
Playing Back Movies
1 Press g.
The image is displayed in the single image display in the playback mode.
2 Use cd to select a movie to play back.
The first frame of the movie is displayed as a still image.
3 Play back the movie.
10/9999
08/08/2025 10:00
00´ 20˝
5
The following operations are available.
a / Tap
Plays back/Pauses the movie.
b / Double-tap
Stops playback.
p/6
Adjusts the sound volume (0 to 20).
cd / q
During playback: Fast-reverses/Fast-forwards playback.
While playback is paused: Reverses/Forwards a frame.
h
While playback is paused: Saves the displayed frame as
a still image (JPEG file).
j
Switches between [Standard Info. Display] and [No
Information Display].
Memo----------------------------------------------------------------------------------• The sound volume at the start of movie playback can be set in [Playback
Sound Volume] in the C1 menu.
• With [Movie Edit] in the C3 menu, a movie file can be divided or cut out.
(p.121)
59
Taking Images
100-0010
3
Setting the Focus
Setting the Focus Mode
Measures the distances from the 5 × 5 AF areas and focuses
to the appropriate AF area. (Default setting)
Auto-area AF
3
Zone Select AF
Focuses to the appropriate AF area in the 3 × 3 AF areas
moved as desired. (p.63)
Taking Images
Focuses to the selected AF area. (p.63)
Select AF
Focuses to the selected AF area that is smaller than [Select
AF]. (p.63)
Pinpoint AF
Tracking AF
Continuous AF
Tracks the subject and continually focuses. (p.63)
When z is pressed halfway, the subject inside the frame
in the center of the monitor is set as the tracking target,
and a green target symbol appears. When a tracking target
cannot be found, the frame color turns red.
Keeps focusing while z is pressed halfway. (p.63)
[Focus-priority] or [FPS-priority] can be set in [AF.C Setting]
in the A1 menu.
Focuses manually. (p.64)
MF
Snap
Fixes the focus to the set distance.
Set a distance in [Snap Focus Distance] in the A1 menu.
Turn p while pressing a to change the distance.
Fixes the focus distance at infinity. This is useful for shooting
distant scenes.
Z
60
1 Select [Focus] in the A1/B1 menu, and then press d.
2 Use ab to select a setting.
Focus
In the B mode, select a setting from [AF],
[MF], [Snap], and [Z].
3 Press e.
4 Press f.
Auto-area AF
Zone Select AF
Select AF
Pinpoint AF
Tracking AF
Continuous AF
Cancel
OK
3
100
1/400
F5.6
400
Memo----------------------------------------------------------------------------------• This function can be registered to [ADJ Mode Setting] and [Fn Button Setting] in the D2 menu. (p.134, p.136)
When [Set MF], [Set Snap], or [Set Tracking AF] is set to [Fn Button Setting],
the focus modes can be switched with button operation only.
• When [Auto-area AF], [Zone Select AF], [Select AF], or [Pinpoint AF] is set,
the AF assist light on the front of the camera lights as necessary. The AF
assist light can be set to [Off ] in [AF Assist Light] in the A1 menu.
• When [Focus Peaking] is set to [On] in the A1/B1 menu, the outline of
the subject in focus is emphasized, and this makes it easier to check the
focus.
• By default, the autofocus also works with h. The focus operation of h
can be set in [Focus Settings] of [Fn Button Setting] in the D2 menu.
(p.136)
61
Taking Images
The focus mode icon appears on the shooting screen.
Caution--------------------------------------------------------------------------------• When [Shutter Button Setting] is set to [AE Lock] in the D2 menu, the
autofocus does not work even when z is pressed halfway. (p.139)
Detection of People-----------------------------------------------------------------
3
Taking Images
• When [Auto-area AF], [Zone Select AF], [Select AF], or [Pinpoint AF] is set,
faces and eyes of people are automatically detected for autofocus. The
setting can be changed to [Use only in Auto-area AF] or [Off ] in [Face/Eye
Detection] in the A1 menu.
• If there are multiple people in the subject, tap the face of the person you
want to focus on to move the AF point (when [Touch AF] is enabled in the
D2 menu).
• When [Auto-area AF] is set, press e during autofocusing to enter the face
selection mode, and then abcd to select the face of the person to be
focused on.
Limiting the Focus Distance------------------------------------------------------• Limiting the focus distance in [Focus Limiter] in the A1 menu allows for
smooth focusing. [Near Side] or [Far Side] can be set.
• [Focus Limiter] is disabled in the following case.
• In the M mode
• In the macro mode
• When [Focus] is set to [MF], [Snap], or [Z]
• During “Full Press Snap” shooting
62
Selecting the Desired AF Point
1 Set [Zone Select AF], [Select AF], [Pinpoint AF], [Tracking AF], or
[Continuous AF] in [Focus] in the A1 menu.
2 Press e on the shooting screen.
The AF point can be changed.
3 Use abcd to set an AF point.
100
3
1/400
F5.6
Taking Images
Press and hold e to reset the AF point to
the center.
You can also tap on the monitor to move
the AF point.
When multiple faces are detected by [Face/
Eye Detection], the face from which to
measure the distance can be selected.
400
4 Press e.
The AF point is set.
Memo----------------------------------------------------------------------------------• When [4-way Controller] is set to [AF point
change Priority] in the D2 menu, the AF
point can be moved using abcd without pressing e in Step 2. In this case, the
button functions are as follows.
4-way Controller
Direct Key Priority
AF point change Priority
Cancel
e
Resets the AF point to the center.
e (pressed
and held)
Switches between the AF point setting by abcd
and the direct key functions (stuv).
63
OK
Focusing Manually (Manual Focus)
If the camera fails to focus automatically, you can focus manually.
The manual focus enables shooting at a fixed distance.
1 Set [MF] in [Focus] in the A1/B1 menu.
The focus bar appears on the shooting screen.
2 Press a.
3
d appears on the focus bar.
100
Taking Images
1/400
3 Adjust the focus distance.
F5.6
400
The following operations are available.
6
Adjusts the focus distance.
j (pressed
and held)
Magnifies the Live View image. (p.49)
Memo----------------------------------------------------------------------------------• When [MF Auto Magnification] is set to [On] in the A1/B1 menu, the
image on the shooting screen is automatically magnified to make it easier
to focus.
64
Shooting Close-ups (Macro)
The camera focuses to the range of 6 to 15 cm from the front edge of the
lens.
1 Press a (s) in the shooting mode.
The camera enters the macro mode and
the macro symbol appears on the shooting
screen.
100
3
F5.6
400
To cancel the macro mode, press a again.
Memo----------------------------------------------------------------------------------• The macro mode can be set to [On] or [Off ] in [Macro Mode] in the A1/
B1 menu.
• When [Focus] is set to [Snap] or [Z], [Select AF] is applied.
Caution--------------------------------------------------------------------------------• When [Focus] is set to [MF], a is used for focus distance adjustment.
(p.64) To enter the macro mode, set [Macro Mode] in the A1/B1
menu.
65
Taking Images
1/400
2 Shoot.
Shooting with a Single Press of the Shutter Release Button (Full Press Snap)
3
Taking Images
While pressing z halfway operates autofocus, pressing z fully
quickly performs shooting at the set focal distance. This function is called
“Full Press Snap”. The camera focuses at the distance set in [Snap Focus Distance] in the A1/B1 menu.
100
Set the “Full Press Snap” in [Full Press Snap] in
1.5m
the A1 menu.
When [Full Press Snap] is set to [On], the symbol and shooting distance are displayed on the
shooting screen.
1/400
F5.6
400
On
Performs shooting by focusing at the distance set in [Snap Focus Distance] when the shutter release button is fully pressed.
Off
Performs autofocus and then shooting.
Caution--------------------------------------------------------------------------------• “Full Press Snap” is not available in the following cases.
• In the M mode
• In the B mode
• In the macro mode
• When [Focus] is set to [MF], [Snap], or [Z]
• When [Drive Mode] is set to [Self-timer]
Memo----------------------------------------------------------------------------------• Even when [Full Press Snap] is set to [On], the camera focuses at the setting
in [Focus] when z is pressed halfway.
66
Setting the Exposure
Selecting the Metering Method
Set the metering method in [AE Metering] in
the A2/B2 menu.
AE Metering
Multi-segment
Center-weighted
Spot
Highlight-weighted
Cancel
Meters exposure with emphasis on the center.
Center-weighted
Spot
Meters exposure within a narrow range.
Use this option when metering exposure in a part of an
image or when the metering target subject is small.
Divides the shooting range and meters exposure with emphasis on the bright areas.
Highlightweighted
67
3
Taking Images
Multi-segment
Divides the shooting range and meters exposure based on
comprehensive judgment.
When a face or eyes are detected with [Face/Eye Detection],
the exposure is adjusted to match the face.
OK
Memo----------------------------------------------------------------------------------• This function can be registered to [ADJ Mode Setting] in the D2 menu.
(p.134)
• When [Link AE and AF Point] is set to [On] in the A2 menu, the metering
point and the AF point are linked in the following combinations of the [AE
Metering] and [Focus] settings.
AE Metering
3
Focus
Taking Images
Multi-segment
[Select AF], [Pinpoint AF], [Tracking AF], or [Continuous
AF]
Spot
[Select AF], [Pinpoint AF], or [Continuous AF]
When a face or eyes are detected with [Face/Eye Detection], the exposure is adjusted to match the face.
68
Setting the ISO Sensitivity
1 Press c (u).
2 Use p/6 to change the value.
Values from ISO 100 to ISO 204800 can be
set.
Press h to reset the ISO sensitivity setting
to ISO AUTO. Press h again to restore the
fixed value set last.
100
ISO AUTO
1/400 F5.6
3
400
• This function can be registered to [ADJ Mode Setting] in the D2 menu.
(p.134)
• Images taken with a higher ISO sensitivity may appear grainy.
• Depending on the ISO sensitivity setting, the setting of [D-Range Correction] in the A5 menu is disabled. (p.97)
• ISO sensitivity can also be set in [ISO Set- ISO Setting
AUTO
ting] in the A2 menu. In this case, the de- ISO Setting
ISO Auto Upper Limit
12800
tailed settings of ISO AUTO can be made.
ISO Auto Lower Limit
Minimum Shutter Speed
ISO Auto Upper
Limit
Sets the highest ISO sensitivity for ISO AUTO.
ISO Auto Lower
Limit
Sets the lowest ISO sensitivity for ISO AUTO.
100
1/30
Minimum Shutter Sets the shutter speed to increase the sensitivity for
Speed
ISO AUTO.
• When the setting of [ISO Button] has been changed in [Fn Button Setting]
in the D2 menu (p.136), set the ISO sensitivity from the A2 menu.
69
Taking Images
Memo-----------------------------------------------------------------------------------
Using the Flash
When the optional flash is connected to the camera, you can discharge a
flash for shooting.
The following flash can be used.
• GF-2
Connecting the Flash
3
1 Remove the hot shoe cover from the
Taking Images
2 Turn off the camera and the external flash, and then attach the
camera.
flash to the camera hot shoe.
3 Turn on the camera, and then turn on the external flash.
Caution--------------------------------------------------------------------------------• Turn the external flash off before removing it from the camera.
• When the camera does not recognize the external flash, turn off the camera and external flash, and then remove and reattach the flash.
Using Other External Flashes----------------------------------------------------• Use only flashes with one signal terminal, which must be an X-contact with
a positive voltage of no more than 20 V.
• [Flash Mode] cannot be set. The flash always operates with [Flash On].
• A flash signal is output to the X-contact of the hot shoe regardless of the
flash setting.
• Use an external flash with a lighting angle that covers the angle of view of
the shooting lens.
70
Setting the Flash Mode
1 Select [Flash Mode] in the A2 menu, and then press d.
2 Select [Flash Mode], and then press d.
3 Use ab to select a flash mode.
Flash Mode
Flash On
Flash On+Red-eye
Slow-speed Sync
Slow Sync+Red-eye
OK
Always fires the flash. (Default setting)
Flash On
Forces the flash to fire while reducing the red-eye
phenomenon.
Flash On+
Red‑eye
Fires the flash with the shutter speed slowed. This is
suitable for taking nightscape images that include peoSlow-speed Sync ple. Use of a tripod is recommended to prevent blur.
Fires the flash with the shutter speed slowed while
reducing the red-eye phenomenon.
Slow Sync+
Red-eye
4 Press e.
5 To compensate the flash output, select [Flash Output], and then
press d.
71
Taking Images
Cancel
3
6 Select the flash output, and then
press e.
Select [1/1] for full output, and [1/4] for 1/4
of the full output.
Flash Output
AUTO
1/1
1/4
Cancel
3
OK
7 Press f twice.
Caution---------------------------------------------------------------------------------
Taking Images
• In the L and N modes, [Slow-speed Sync] and [Slow Sync+Red-eye]
cannot be selected.
72
Reducing Noise
Slow Shutter Speed Noise Reduction
Using a long shutter speed results in a noisy
image. When [Slow Shutter Speed NR] is set in
[Noise Reduction] in the A5 menu, noise reduction processing is carried out.
Slow Shutter Speed NR
Auto
On
Off
Cancel
OK
Applies the noise reduction according to the shutter speed,
ISO sensitivity, and internal temperature of the camera.
On
Applies the noise reduction when the shutter speed is slower
than 1 second.
Off
Does not apply the noise reduction.
The status lamp blinks during the [Slow Shutter Speed NR] processing.
High-ISO Noise Reduction
You can reduce the amount of noise when images are taken with a higher
ISO sensitivity.
1 Select [High-ISO Noise Reduction] in [Noise Reduction] in the
A5 menu, and then press d.
The [High-ISO Noise Reduction] screen appears.
2 Use ab to select a setting, and then
press e.
High-ISO Noise Reduction
Auto
Low
Medium
High
Custom
Off
Cancel
73
OK
Taking Images
Auto
3
3
Auto
Automatically reduces noises according to the ISO
sensitivity.
Low, Medium,
High
Applies the noise reduction at a low, medium, or high
level.
Custom
Sets the noise reduction level for each ISO sensitivity.
Off
Does not apply the noise reduction.
The [Noise Reduction] screen reappears.
When [Custom] is selected, proceed to the next step.
When other settings are selected, proceed to Step 6.
Taking Images
3 Select [Custom Options], and then press d.
The ISO sensitivity setting screen appears.
4 Use ab to select an ISO sensitivity
and cd to select a level.
High-ISO Noise Reduction
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
5 Press e.
6 Press f twice.
Cancel
OK
Caution--------------------------------------------------------------------------------• When the noise reduction is set, it may take longer than normal to save
images.
74
Setting the White Balance
You can make adjustments to the white balance so that white subjects will
appear white under any kind of light.
If you cannot get the white balance you want when shooting an object of
a single color or when shooting under multiple light sources, change the
setting.
Adjusts the white balance automatically.
3
Auto White Balance
Auto WB (Warmth Pri.)
Produces a finish close to the original color
even under incandescent lighting.
Auto WB (White Pri.)
Used when shooting in daylight under clear
skies.
Daylight
Used when shooting in shade.
Shade
Used when shooting in daylight under cloudy
skies.
Cloudy
Used with daylight fluorescent lighting.
Fl. - Daylight Color
Used with neutral white fluorescent lighting.
Fl. - Daylight White
Used with cool white fluorescent lighting.
Fl. - Cool White
75
Taking Images
Produces a warm finish that retains the color of
incandescent lighting.
Used with warm white fluorescent lighting.
Fl. - Warm White
Used with incandescent lighting.
Tungsten
3
CTE
Exaggerates the color of the light source to
leave the color of the subject.
Use this setting when you want to emphasize
the color used for most part of the image.
Sets the white balance manually. (p.78)
Taking Images
Manual White Balance
Sets the color temperature between 2500 to
10000 K. (p.79)
Color Temperature
Custom 1 to 3
Uses the registered fine-tuned white balance
(three types of white balance can be registered).
1 Press t (b) in the shooting mode.
The [White Balance] screen appears.
2 Use ab to select a setting.
If no fine tuning is required, proceed to
Step 6.
Refer to p.78 for details on [Manual White
Balance] and p.79 for [Color Temperature].
3 Press h.
4 Use abcd to fine-tune the color.
White Balance
Auto WB (Warmth Pri.)
Cancel
OK
Daylight
G1:A1
Cancel
76
OK
5 Press e.
The screen in Step 2 reappears.
6 Press e.
The white balance icon appears on the
shooting screen.
100
G1B1
1/400
F5.6
400
• The white balance can also be set in [White Balance] in the A5/B5
menu. When the setting of [White Balance Button] has been changed in
[Fn Button Setting] in the D2 menu (p.136), set the white balance from
the A5/B5 menu.
• When the white balance is turned on in [Memory] in the D2 menu
(p.140), the fine-tuned value is saved even when the camera is turned off.
Caution--------------------------------------------------------------------------------• The white balance may not be adjusted correctly for a subject that is mostly dark.
• When using the flash, set the white balance to [Auto White Balance], [Auto
WB (Warmth Pri.)], [Auto WB (White Pri.)], or [Manual White Balance]. The
white balance may not be adjusted correctly for other settings.
77
Taking Images
Memo-----------------------------------------------------------------------------------
3
Setting the White Balance Manually
1 Select [Manual White Balance] in Step 2 on p.76.
2 Aim the camera at a white subject, such as a sheet of paper,
under the light for shooting.
3 Press j.
3
An image to be used for white balance adjustment is taken.
Taking Images
4 Use abcd to adjust the point.
Manual White Balance
Cancel
5 Press e.
The [White Balance] screen reappears.
6 Press e.
The shooting screen reappears.
78
OK
Setting the Color Temperature
1 Select [Color Temperature] in Step 2 on p.76, and then press
d.
The [Color Temperature] screen appears.
2 Use ab to set a value.
The color temperature can be set between
2500 to 10000 K in increments of 10 K.
Press j to fine-tune the color.
Cancel
The [White Balance] screen reappears.
4 Press e.
The shooting screen reappears.
79
3
0:0
OK
Taking Images
3 Press e.
Color Temperature
5000K
Setting the Drive Mode
1 Press v (d) in the shooting mode.
The [Drive Mode] screen appears.
3
Taking Images
2 Press d.
Drive Mode
Single Frame Shooting
3 Use ab to select a drive mode.
Drive
Single Frame Shooting
The [Drive] screen appears.
For [Self-timer], refer to p.89.
Cancel
Takes a single image per shooting.
OK
—
Single Frame
Shooting
Performs continuous shooting while z p.81
is pressed.
Continuous
Shooting
Takes three images with different exposure p.82
settings.
Bracketing
Takes images while merging them together. p.83
Multi-exposure
Takes images automatically at a fixed
interval.
Interval Shooting
80
p.85
Merges a series of images taken continup.87
ously in such a way that the bright areas
remain. Use this function when you want to
record the trails of light formed by stars or
Interval Composite the moon during nightscape shooting at a
fixed position.
4 Press e.
100
The drive mode icon appears on the shooting screen.
3
F5.6
400
Memo----------------------------------------------------------------------------------• The drive mode can also be set in [Drive Mode] in the A3 menu. When the
setting of [Drive Button] has been changed in [Fn Button Setting] in the
D2 menu (p.136), set the drive mode from the A3 menu.
Shooting Continuously (Continuous Shooting)
1 Select [Continuous Shooting] in Step 3 on p.80.
2 Press and hold z on the shooting screen.
Images continue to be taken while z is pressed.
81
Taking Images
1/400
Shooting with Varied Exposure Values (Bracketing)
1 Select [Bracketing] in Step 3 on
p.80, and then press h.
Drive
Bracketing
The detailed settings screen appears.
Cancel
3
2 Use abcd to change the setting.
OK
Bracketing
Taking Images
Bracket Value
±0.3
Bracketing Order
0−+
Bracket Value
Sets the range for changing the exposure from ±0.3
to ±5.0.
Bracketing Order
Sets the order of 3 images to be taken from [0 - +],
[- 0 +], [+ 0 -], or [0 + -].
3 Press f.
The [Drive] screen reappears.
4 Press e.
The shooting screen reappears.
5 Press z.
Three images are saved in the set order with one release of the shutter.
Memo----------------------------------------------------------------------------------• When using the flash, images are taken while automatically changing the
flash output.
82
Shooting While Merging Images Together (Multi-exposure)
1 Select [Multi-exposure] in Step 3 on
p.80, and then press h.
Drive
Multi-exposure
The detailed settings screen appears.
Composite Mode
Save Interim Images
Cancel
OK
Multi-exposure
Composite Mode
Save Interim Images
Average
Composite Mode
[Average]: Creates a composite image with the
average exposure.
[Additive]: Creates a composite image with the
cumulatively added exposure.
[Bright]: Creates a composite image replacing only
the portions that are brighter compared with the
first image.
Save Interim Images
Sets whether to save unprocessed images and
images in the middle of processing.
The images in the middle of processing are saved in
the JPEG format.
3 Press f.
The [Drive] screen reappears.
4 Press e.
The shooting screen reappears.
5 Take the first image.
83
3
Taking Images
2 Use abcd to change the setting.
Average
6 To take the next image, select [Next
shot], and then press e.
To retake the image, select [Retake shot].
Next shot
Retake shot
Complete
7 Take the next image.
3
OK
Repeat Steps 6 to 7.
To return to the previous merged image, select [Retake shot].
Taking Images
8 Select [Complete] to end shooting.
The merged image is saved.
Caution--------------------------------------------------------------------------------• The settings for the following functions cannot be changed during the
multi-exposure shooting.
• [Drive Mode] in the A3 menu
• [Shooting Memory Setting], [File Format], [Aspect Ratio], [Crop], and
[JPEG Recorded Pixels] in the A4 menu
• [White Balance] and [Image Control] in the A5 menu
84
Shooting Automatically at Set Intervals (Interval Shooting)
1 Select [Interval Shooting] in Step 3 on
p.80, and then press h.
Drive
Interval Shooting
The detailed settings screen appears.
Interval
Number of Shots
Start Interval
Start Time
Cancel
OK
Interval Shooting
Interval
Number of Shots
Start Interval
Start Time
00´01˝
∞
Now
00:00
Interval
Sets the shooting interval from [Minimum] to 60
min.
Number of Shots
Sets the number of shots to [Z] or from [2] to
[99].
Start Interval
Sets whether to take the first image immediately or
at the set time.
Start Time
Sets the time when [Start Interval] is set to [Set
Time].
3 Press f.
The [Drive] screen reappears.
4 Press e.
The shooting screen reappears.
5 Press z.
When [Start Interval] is set to [Now], the first image is taken. When [Start
Interval] is set to [Set Time], shooting starts at the set time.
To cancel shooting, press e.
85
3
Taking Images
2 Use abcd to change the setting.
00´01˝
∞
Now
00:00
Caution--------------------------------------------------------------------------------• Depending on the shooting settings, the time until the next image is taken
may be longer than the time set for the interval shooting.
• When the shooting interval is short, the exposure for the first image may
be used for the second and later images.
• The interval shooting is canceled if the exposure mode is changed or the
camera is turned off.
Memo-----------------------------------------------------------------------------------
3
Taking Images
• For each interval shooting, a new folder is created and the images are
saved there.
• If “Full Press Snap” shooting is performed when [Focus] is set to [MF],
[Snap], or [Z] in the A1 menu (p.60), the focus position is fixed at the
position for the first image.
• Use a fully charged battery, commercially available AC adapter compatible
with USB Power Delivery, or optional AC adapter (K-AC166).
86
Recording Star Trails (Interval Composite)
1 Mount the camera on a tripod, and then take a test shot.
Set the exposure, focus mode, and white balance, and then check the
composition. Images are merged with this exposure setting.
2 Select [Interval Composite] in Step 3
on p.80, and then press h.
Drive
Interval Composite
The detailed settings screen appears.
3 Use abcd to change the setting.
3
∞
Now
00:00
OK
Interval Composite
Shooting Period
∞
Start Interval
Start Time
Save Interim Images
Now
00:00
Shooting Period
Sets the shooting period to [Z] or from 10 min.
to 24 hr.
Start Interval
Sets whether to take the first image immediately or
at the set time.
Start Time
Sets the time when [Start Interval] is set to [Set
Time].
Save Interim Images
Sets whether to save unprocessed images and
images in the middle of processing.
The images in the middle of processing are saved
in the JPEG format.
4 Press f.
The [Drive] screen reappears.
5 Press e.
The shooting screen reappears.
87
Taking Images
Shooting Period
Start Interval
Start Time
Save Interim Images
Cancel
6 Take the first image.
Images are taken continuously at the shortest interval.
To check the images being merged, press z halfway.
If z is pressed fully, the images merged up to that point are saved as
they are, and the interval composite shooting starts with a new image.
To cancel shooting, press e.
Caution---------------------------------------------------------------------------------
3
Taking Images
• During exposure, the image at the time e is pressed or z is fully
pressed is not merged.
• The interval composite shooting is canceled if the exposure mode is
changed or the camera is turned off.
• Autofocus is not performed for the second and subsequent images.
• The following functions are fixed to [Off ].
• [Slow Shutter Speed NR] in [Noise Reduction] in the A5 menu
• [Shake Reduction] in the A6 menu
Memo----------------------------------------------------------------------------------• When [Save Interim Images] is set so that images in the middle of processing are saved, for each interval composite, a new folder is created and the
images are saved there.
• The values of the following settings are fixed when the first image is taken.
• Focus position of autofocus
• ISO sensitivity, shutter speed, and aperture value when the ISO sensitivity is set to ISO AUTO
• White balance values
• During shooting in a dark location, using the optional external viewfinder
(GV-1 or GV-2) is convenient.
88
Using the Self-timer
In the drive modes other than [Continuous
Shooting], you can use [Self-timer] together.
[10sec.] or [2sec.] can be selected.
The self-timer lamp blinks and a beep sounds
during the self-timer countdown.
Self-timer
10sec.
Cancel
OK
Memo-----------------------------------------------------------------------------------
89
3
Taking Images
• The self-timer can only be used for the first image in [Interval Shooting]
and [Interval Composite]. When [Start Interval] is set to [Set Time], the
self-timer is disabled.
• The self-timer lamp and beep sound during the self-timer countdown can
be turned off. (p.144, p.145)
Configuring the Image Save Settings
Setting the Save Destination
You can set the save destination for still images
and movies in [Shooting Memory Setting] in
the A4/B4 menu.
Shooting Memory Setting
Image is recorded in specified memory.
Even if the memory becomes full,
recording destination will not change.
Internal Memory Priority
Memory Card Priority
3
Cancel
OK
Taking Images
Internal Memory
Priority
Saves still images and movies in the internal memory.
Memory Card Priority
When a memory card is inserted, saves still images
and movies in the memory card, and when a memory card is not inserted, saves them in the internal
memory.
Caution--------------------------------------------------------------------------------• Even if the save destination memory becomes unable to save still images
and movies (due to no free space available, folder creation not possible,
memory failure, or other conditions that prevent recording), the save destination does not switch to the other destination.
90
Still Image Save Settings
You can set the file format for still pictures in
[Image Capture Settings] in the A4 menu.
Image Capture Settings
Shooting Memory Setting
File Format
Aspect Ratio
Crop
3:2
Off
JPEG Recorded Pixels
Color Space
White Balance
[JPEG]
[RAW]: Saves a RAW image (DNG format).
[RAW+JPEG]: Saves a RAW image simultaneously with a
JPEG image.
Aspect Ratio
[3:2], [4:3], [1:1], [16:9]
Crop
[Off ], [35mm], [50mm]
JPEG Recorded Pixels [L], [M], [S], [XS]
Color Space
[sRGB], [AdobeRGB]
Memo----------------------------------------------------------------------------------• When [Aspect Ratio] is set to [4:3] or [1:1], black bands appear at the right
and left sides of the monitor, and when [Aspect Ratio] is set to [16:9], black
bands appear at the top and bottom of the monitor.
• This function can be registered to [ADJ Mode Setting] and [Fn Button Setting] in the D2 menu. (p.134, p.136)
If [JPEG Ž RAW] or [JPEG Ž RAW+] is set to [Fn Button Setting], the image
format can be easily switched.
Shooting RAW Images-------------------------------------------------------------• A RAW image can be converted to JPEG format in [RAW Development] in
the C3 menu. (p.111)
• RAW images are saved with the recorded pixels of 26M (6192 × 4128) regardless of the [Aspect Ratio] and [Crop] settings.
• The following functions are not reflected in RAW images. These functions
can be reflected when a RAW image is converted to JPEG format in [RAW
Development] in the C3 menu.
• Image Control
• Shadow Correction
When the file format is set to [RAW+JPEG], the functions listed above are
reflected in JPEG images only.
91
3
Taking Images
File Format
Changing the Angle of View------------------------------------------------------• When [Crop] is set to [35mm] or [50mm], the 35 mm equivalent angle of
view is changed from default 28 mm to 35 mm or 50 mm, and the image
display is also changed.
• When [Crop] is set, available [JPEG Recorded Pixels] settings are limited.
Crop
3
JPEG Recorded Pixels
35mm
When [L] is set: Changes the recorded pixels to
[M].
50mm
When [L] or [M] is set: Changes the recorded
pixels to [S].
Taking Images
Movie Save Settings
You can set the file format for movies in [Movie
Capture Settings] in the B4 menu.
Movie Capture Settings
Shooting Memory Setting
Framerate
Sound Recording
White Balance
Image Control
Peripheral Illumin. Corr.
D-Range Correction
Framerate
[60p], [30p], [24p]
Sound Recording
[On], [Off ]
92
60p
Setting the Image Finishing Tone and Correction
Using the ND Filter
You can set whether to always use the internal ND filter of the camera in [ND Filter] in the
A2/B2 menu.
ND Filter
Auto
On
Off
OK
Auto
Automatically determines whether to turn this function on or off according to conditions. The ND filter is used when the icon is displayed
on the shooting screen when z is pressed halfway.
This function is disabled when the ISO sensitivity is set to a fixed value
in the N mode.
[Auto] cannot be selected in the B mode.
On
Always uses the ND filter. The icon is displayed on the shooting screen.
Off
Not uses the ND filter.
Memo----------------------------------------------------------------------------------• This function can be registered to [Fn Button Setting] in the D2 menu.
(p.136)
Reducing Moiré (AA Filter Simulator)
A moiré reduction effect simulating that of a
low-pass filter can be achieved with [AA Filter
Simulator] in the A3 menu.
[High], [Low], or [Off ] can be selected.
AA Filter Simulator
High
Low
Off
Cancel
OK
Caution--------------------------------------------------------------------------------• When shooting with a fast shutter speed or with the flash, the full effect of
this function may not be achieved.
93
Taking Images
Cancel
3
Setting the Image Atmosphere (Image Control)
You can take images with varied saturation and contrast.
The settings such as the color tone can be changed to take distinctive images.
Takes an image with normal image quality.
Standard
Takes an image with vivid and sharp colors.
3
Taking Images
Vivid
Takes a black and white image.
Monotone
Soft Monotone
Takes a black and white image that gives soft
impression.
This cannot be selected in the B mode.
Takes a black and white image that gives hard
impression.
Hard Monotone
Hi-Contrast B&W
Takes a black and white image with stronger
contrast. This makes it possible to take images with
a grainy feel, such as that created by using ultra-high-sensitivity film in a film camera or by push
processing film at the development stage.
Takes an image like one taken with positive film.
Negative Film
Takes a highly saturated image like one taken with
positive film.
Positive Film
Takes a cinematic image with a yellowish tint.
Cinema (Yellow)
Takes a cinematic image with a greenish tint in the
shadow areas.
Cinema (Green)
94
Takes an image that looks as if it has been cross-processed by changing the color tone and contrast.
Cross Processing
Takes an image with low saturation and high
contrast.
Bleach Bypass
Takes an image that looks like an old photo.
Retro
Taking Images
HDR Tone
3
Takes an image finished like a painting with enhanced fine contrast.
This cannot be selected in the B mode.
Takes an image with parameters changed (three
types of image control can be registered).
Custom 1 to 3
1 Select [Image Control] in the A5/B5 menu, and then press d.
The [Image Control] screen appears.
2 Use ab to select an image.
If you do not want to change the parameters, proceed to Step 6.
Image Control
Standard
Cancel
3 Press h.
OK
The detailed settings screen appears.
4 Use abcd to change the setting.
Available parameters vary depending on the
selected image.
5 Press e.
Standard
Saturation
Cancel
The screen in Step 2 reappears.
95
0
0
0
0
0
0
0
OK
6 Press e.
7 Press f.
The icon appears on the shooting screen.
100
1/400
3
F5.6
400
Taking Images
Caution--------------------------------------------------------------------------------• The [Image Control] setting is not applied to RAW images. It can be set
when [RAW Development] in the C3 menu is performed. (p.111)
Memo----------------------------------------------------------------------------------• This function can be registered to [ADJ Mode Setting] and [Fn Button Setting] in the D2 menu. (p.134, p.136)
• The names of [Custom 1] to [Custom 3] can be changed using the RICOH
GR series dedicated app “GR WORLD”. (p.124)
Correcting the Peripheral Illumination
You can reduce peripheral light fall-off occurring due to lens properties with [Peripheral
Illumin. Corr.] in the A5/B5 menu.
Peripheral Illumin. Corr.
On
Off
Cancel
96
OK
Correcting a Range of Tones (D-Range Correction)
You can expand an image gradation to make
the bright and dark portions of an image
clearly visible with [D-Range Correction] in the
A5/B5 menu.
D-Range Correction
Highlight Correction
Shadow Correction
Highlight Correction
[Auto], [Low], [Medium], [High], or [Off ] can be
selected.
Shadow Correction
Caution--------------------------------------------------------------------------------• When [Shadow Correction] is set to [High], noise in images may be noticeable.
• When the ISO sensitivity is set to less than ISO 200, [Highlight Correction]
does not operate.
97
3
Taking Images
[Auto], [On], or [Off ] can be selected.
[On] cannot be selected in the B mode.
Reducing Blurring of Images
To automatically reduce blurring of images, set the following functions.
By default, both settings are set to [On].
3
Still Image Mode
[Shake Reduction] in the A6 menu
Movie Mode
[Movie SR] in the B6 menu
Memo-----------------------------------------------------------------------------------
Taking Images
• If [Shake Reduction] is set to [Fn Button Setting] in the D2 menu, the
Shake Reduction function can be turned on and off with button operation
only. (p.136)
• When [Self-timer] is set in [Drive Mode], [Shake Reduction] is automatically
set to [Off ]. To keep the Shake Reduction function set to [On], set [Auto SR
Off ] to [Disable Auto SR Off ] in the A6 menu.
Correcting the Skew of Images
You can correct the horizontal camera angle detected by the electronic level.
Make settings in [Horizon Correction] in the A6 menu.
98
Playback Functions
Using the Playback Functions
You can set the playback functions in the C menu or on the playback function selection screen.
Press k or tap and hold on the monitor in Delete
the playback mode to display the playback
function selection screen. The C2/C3 menu
settings can be made on the playback function
selection screen.
OK
• The playback functions that are not supported by the displayed image
cannot be used.
99
Playback Functions
Caution---------------------------------------------------------------------------------
4
Changing the Playback Method
Displaying Multiple Images
You can display multiple images in the thumbnail view.
1 Press the – side of 6 in the single image display in the playback
mode.
Multiple images are displayed.
08/08/2025 10:00
100 /99999
4
Playback Functions
100-0630
1/2000 F5.6
6400
EV+0.7
The following operations are available.
abcd /
p/q
Moves the selection frame.
Flick up or down
Switches pages.
j
Switches between 20-image view and 48-image view.
6 (–) / Pinch in
Switches to the shooting date display (folder display).
e
In the shooting date display: Displays multiple images
of the selected shooting date.
In the folder display: Displays multiple images in the
selected folder.
i
Deletes the selected images. (p.104)
k / Tap and hold Displays the playback function selection screen.
k (7) (pressed
and held)
Switches the memory to play back images.
2 Press e or n.
You can also tap the image to select it.
The selected image is displayed in the single image display.
100
Memo----------------------------------------------------------------------------------• The images are displayed in order of the shooting date and time. The display order can be changed to [File No.] in [Playback Order Options] in the
C1 menu. In this case, if the – side of 6 is pressed after Step 1, images are
displayed in the folder display.
• When multiple images are displayed, switching to the C2 menu or playback function selection screen allows you to apply the selected function to
multiple images at once. When a function is selected in the shooting date
display or folder display, the function can be applied by shooting date or
by folder. If a function that cannot be applied by shooting date or by folder
is selected, an error message is displayed.
Displaying Rotated Images
4
Playback Functions
You can change image rotation information in 90° increments.
1 Display the image to rotate in the single image display in the
playback mode.
When multiple images are displayed, the selected images are processed.
2 Select [Image Rotation] in the C2 menu or on the playback
function selection screen, and then press d.
3 Select the rotation direction, and
Image Rotation
then press e.
Cancel
OK
Memo----------------------------------------------------------------------------------• In the playback mode, the displayed image is rotated according to the
camera’s orientation. When [Auto Image Rotation] is set to [Off ] in the C1
menu, the image display orientation is fixed regardless of the [Image Rotation] setting.
101
Caution--------------------------------------------------------------------------------• Rotation direction cannot be changed when the write-protect switch on
the memory card is locked or for the following images.
• Movies
• Protected images
Connecting the Camera to an AV Device
You can connect the camera to an AV device such as a TV to display Live View
images while shooting or to play back images.
Use the provided USB cable (I-USB198) to connect the camera to an AV device.
4
Playback Functions
1 Turn the AV device and camera off.
2 Open the terminal cover of the
camera, and then connect the USB
cable to the USB terminal.
3 Connect the USB cable to the video input terminal on the AV
device.
For details, refer to the manual for the AV device.
4 Turn the camera on.
5 Turn the AV device on.
Caution--------------------------------------------------------------------------------• While the camera is connected to an AV device, nothing is displayed on
the camera monitor.
• The audio of movies is output from the AV device. Adjust the volume on
the AV device.
• The camera cannot supply power to the AV device. Supply power on the
AV device side.
Memo----------------------------------------------------------------------------------• The USB terminal (USB Type-C) on the camera supports DisplayPort™.
102
Organizing Files
Deleting Files
1 Select [Delete] in the C2 menu or on the playback function
selection screen, and then press d.
2 Select [Delete 1 Image] or [Delete All Images].
3 Press e.
Delete All Images
100-0001
The image is deleted.
Repeat Steps 2 and 3 to delete another image.
To end the process, select [Cancel].
When [Delete All Images] is selected, proceed to the next step.
4 Select [Execute], and then press e.
All images are deleted.
103
OK
4
Playback Functions
When [Delete 1 image] is selected, use cd to select an image.
08/08/2025 10:00
1 /100
For images taken with [File Format] set to
[RAW+JPEG], you can select the file format
Cancel
to delete.
Delete RAW+JPEG
When [Delete All Images] is selected, you
Delete JPEG
cannot select the file format to delete.
Delete RAW
Deleting Multiple Images
1 Press the – side of 6 in the single image display in the playback
mode.
Multiple images are displayed.
2 Press i.
3 Select the images to delete.
08/08/2025 10:00
100 /99999
4
Playback Functions
100-0100
Execute
The following operations are available.
abcd /
p/q
Moves the selection frame.
e
Selects/Deselects an image.
j
Selects the starting or ending point for image selection
range.
4 Press h.
The confirmation screen appears.
5 Select [Execute], and then press e.
The selected images are deleted.
Memo----------------------------------------------------------------------------------• Protected images cannot be selected.
104
Protecting Images from Deletion
You can protect images to prevent them from being deleted accidentally.
1 Select [Protect] in the C2 menu or on the playback function
selection screen, and then press d.
2 Select [Protect 1 Image] or [Protect
08/08/2025 10:00
1 /100
All Images].
When [Protect 1 Image] is selected, use cd
to select an image.
Cancel
Protect 1 Image
Protect All Images
OK
100-0001
When [Protect 1 Image] is selected, the
selected image is protected.
Repeat Steps 2 and 3 to protect another
image.
To end the process, select [Cancel].
When [Protect All Images] is selected, proceed to the next step.
08/08/2025 10:00
100-0001
1/2000 F5.6
1 /100
6400
4 Select [Protect] or [Unprotect], and then press e.
All images are protected or unprotected.
Memo----------------------------------------------------------------------------------• To cancel the protection, set [Protect] for the image again.
Caution--------------------------------------------------------------------------------• If [Format] is performed in the E1 menu, protected images are also deleted.
105
Playback Functions
3 Press e.
4
Protecting Multiple Images from Deletion
1 Press the – side of 6 in the single image display in the playback
mode.
Multiple images are displayed.
2 Select [Protect] in the C2 menu or on the playback function
selection screen, and then press d.
3 Select the images to protect.
08/08/2025 10:00
100 /99999
4
Playback Functions
100-0100
Execute
The following operations are available.
abcd /
p/q
Moves the selection frame.
e
Selects/Deselects an image.
j
Selects the starting or ending point for image selection
range.
4 Press h.
The confirmation screen appears.
5 Select [Execute], and then press e.
The selected images are protected.
106
Copying Images
You can copy images between the internal memory and the memory card.
1 Insert a memory card.
2 Press and hold k (7) to select the
08/08/2025 10:00
1 /100
memory from which the image is
copied.
100-0001
1/2000 F5.6
6400
4
function selection screen, and then press d.
4 Select [Copy 1 Image] or [Copy All
08/08/2025
10:00
1 /100
Images].
When [Copy 1 Image] is selected, use cd to
select an image.
Cancel
Copy 1 Image
For images taken with [File Format] set to
Copy All Images
[RAW+JPEG], you can select the file format
OK
100-0001
to copy.
When [Copy All Images] is selected, you cannot select the file format to
copy.
5 Press e.
When [Copy 1 Image] is selected, the image is saved to the copy destination.
Repeat Steps 4 and 5 to copy another image.
To end the process, select [Cancel].
When [Copy All Images] is selected, proceed to the next step.
6 Select [Execute], and then press e.
A new folder is created at the copy destination and the images are saved
there.
107
Playback Functions
3 Select [Image Copy] in the C2 menu or on the playback
Caution--------------------------------------------------------------------------------• If there is insufficient capacity at the copy destination, a message indicating insufficient capacity is displayed.
Copying Multiple Images
1 Press and hold k (7) to select the memory from which the
images are copied.
2 Press the – side of 6 in the single image display in the playback
mode.
4
Multiple images are displayed.
Playback Functions
3 Select [Image Copy] in the C2 menu or on the playback
function selection screen, and then press d.
4 Select the images to copy.
08/08/2025 10:00
100-0100
100 /99999
Execute
The following operations are available.
abcd /
p/q
Moves the selection frame.
e
Selects/Deselects an image.
j
Selects the starting or ending point for image selection
range.
5 Press h.
The confirmation screen appears.
6 Select [Execute], and then press e.
The selected images are copied.
108
Setting the Transfer Reservation for Images
You can select images to transfer to a communication device and make a
transfer reservation.
When you operate the RICOH GR series dedicated app with a communication device that has registered the camera, the file transfer automatically
starts.
1 Select [File Transfer] in the C2 menu or on the playback
function selection screen, and then press d.
2 Select [Transfer 1 Image].
08/08/2025
10:00
1 /100
4
Cancel
Transfer 1 image
OK
100-0001
3 Press e.
The transfer reservation is set for the image.
Repeat Steps 2 and 3 to transfer another
image.
To end the process, select [Cancel].
08/08/2025 10:00
100-0001
1/2000 F5.6
1 /100
6400
EV 0.0
Memo----------------------------------------------------------------------------------• To cancel the transfer reservation, set [File Transfer] for the image again.
• Refer to “Using the Camera with a Communication Device” (p.124) for
how to connect the camera to a communication device.
Setting the Transfer Reservation for Multiple Images
1 Press the – side of 6 in the single image display in the playback
mode.
Multiple images are displayed.
2 Select [File Transfer] in the C2 menu or on the playback
function selection screen, and then press d.
109
Playback Functions
Use cd to select an image.
For images taken with [File Format] set to
[RAW+JPEG], you can select the file format
to transfer.
3 Select [Transfer Reservation] or [Cancel Reservation], and then
press e.
When [Transfer Reservation] is selected, proceed to the next step.
When [Cancel Reservation] is selected, the transfer is canceled and the
screen returns to the multi-image display.
4 Select the images to transfer.
4
08/08/2025 10:00
100-0100
100 /99999
Execute
The following operations are available.
Playback Functions
abcd /
p/q
Moves the selection frame.
e
Selects/Deselects an image.
j
Selects the starting or ending point for image selection
range.
5 Press h.
The screen to select the file format for transferred images appears.
6 Use n to turn each file format on
File Transfer
or off.
JPEG
RAW
Movie
Cancel
7 Press e.
The transfer reservation is set for the selected images.
110
OK
Editing and Processing Images
You can edit and process taken images and then save them as new images.
Caution--------------------------------------------------------------------------------• Only JPEG images taken with the camera can be edited and processed
(only RAW images for [RAW Development]). Still images saved from movies
cannot be edited and processed. Note that if you edit and process images
repeatedly, image quality will deteriorate.
Developing RAW Images
1 Display the RAW image to develop in the playback mode.
2 Select [RAW Development] in the C3 menu or on the playback
function selection screen, and then press d.
The [RAW Development] screen appears.
3 Use ab to select a parameter.
JPEG Recorded Pixels
6192x4128
0.0
Cancel
The following settings are available.
• JPEG Recorded Pixels
• Aspect Ratio
• Color Space
• White Balance
• Image Control
Preview
• Peripheral Illumin. Corr.
• Sensitivity
• High-ISO Noise Reduction
• Shadow Correction
The settings that were set at the time of shooting are initially selected.
You can only select settings that can be changed.
111
Execute
4
Playback Functions
You can convert RAW images (file extension: DNG) into JPEG format (file extension: JPG) and then save them as new images. Various settings such as
[White Balance] and [Image Control] can be configured for saved images.
The following operations are available.
k
Displays the preview.
p/6
During the preview: Magnifies the image.
4 Press d.
The setting selection screen appears.
5 Use ab to select a setting.
4
For [White Balance] and [Image Control],
pressing h displays the detailed settings
screen.
Playback Functions
6 Press e.
JPEG Recorded Pixels
6192x4128
Cancel
OK
The screen in Step 3 reappears.
7 When you have finished configuring all of the settings, press
e.
8 Select the save destination memory,
RAW Development
and then press e.
The image is saved as a new image.
Cancel
Internal Memory
Memory Card
Cancel
9 Select [Continue] or [Finish], and then press e.
When [Continue] is selected, the screen in Step 3 reappears.
112
OK
Developing Multiple RAW Images
You can develop multiple images with the same settings.
1 Press the – side of 6 in the single image display in the playback
mode.
Multiple images are displayed.
2 Select [RAW Development] in the C3 menu or on the playback
function selection screen, and then press d.
RAW images are searched.
3 Select the images to develop.
08/08/2025 10:00
Execute
The following operations are available.
abcd /
p/q
Moves the selection frame.
e
Selects/Deselects an image.
j
Selects the starting or ending point for image selection
range.
4 Press h.
The parameter selection screen appears.
5 Select a parameter and setting.
6 When you have finished configuring all of the settings, press
e.
7 Select the save destination memory, and then press e.
The images are saved as new images.
113
4
Playback Functions
100-0100
10 /20
Changing the Image Size
Reducing the Image Size (Resize)
You can reduce the size of JPEG images and save them.
1 Display the image to process in the single image display in the
playback mode.
When multiple images are displayed, the selected images are processed.
2 Select [Resize] in the C3 menu or on the playback function
4
selection screen, and then press d.
The [Resize] screen appears.
Playback Functions
3 Select the image size.
Resize
4944x3298
The smaller size than the [JPEG Recorded
Pixels] setting for shooting can be selected.
Cancel
4 Press e.
5 Select the save destination memory, and then press e.
The image is saved as a new image.
114
OK
Cropping Images
You can crop a part of JPEG images and then save them.
1 Display the image to process in the single image display in the
playback mode.
When multiple images are displayed, the selected images are processed.
2 Select [Cropping] in the C3 menu or on the playback function
selection screen, and then press d.
The [Cropping] screen appears.
3 Specify the range to crop.
Cropping
Preview
The following operations are available.
abcd /
p/q
Moves the cropping frame.
n
Changes the aspect ratio of the cropping frame (3:2, 4:3,
1:1, or 16:9).
j
Switches the p operation between changing the cropping size and rotating the image.
6
Changes the cropping size or rotates the cropping frame
by 0.1°.
h
Rotates the cropping frame by 90°.
k
Displays the preview.
p/6
During the preview: Magnifies the image.
4 Press e.
5 Select the save destination memory, and then press e.
The image is saved as a new image.
115
OK
4
Playback Functions
Cancel
3840x2560
Correcting Highlight/Shadow Areas (Levels Adjustment)
You can correct the brightness and contrast of the highlight, mid-tone, and
shadow areas in JPEG images.
1 Display the image to process in the single image display in the
playback mode.
When multiple images are displayed, the selected images are processed.
2 Select [Levels Adjustment] in the C3 menu or on the playback
function selection screen, and then press d.
4
The [Levels Adjustment] screen appears.
Playback Functions
3 Adjust the value.
Levels Adjustment
Switch Points
Cancel
Preview
The following operations are available.
n
Switches the adjustment points.
cd / q
Adjusts the value.
h
Performs the auto correction.
k
Displays the preview.
p/6
During the preview: Magnifies the image.
4 Press e.
5 Select the save destination memory, and then press e.
The image is saved as a new image.
116
Auto Adjust
OK
How to Make Adjustments--------------------------------------------------------• Moving the center point left or right adjusts the
overall brightness. Move it to the left to make the
image brighter, or move it to the right to make
the image darker.
• If the image is overexposed, move the left point
to the right so that it aligns with the edge of the
histogram peak. If the image is underexposed,
move the right point to the left.
117
4
Playback Functions
• When the histogram peak is in the center and
the contrast is low, align the left and right points
with the edges of the histogram peak.
Correcting the White Balance
You can correct the white balance of JPEG images.
1 Display the image to process in the single image display in the
playback mode.
When multiple images are displayed, the selected images are processed.
2 Select [WB Adjustment] in the C3 menu or on the playback
function selection screen, and then press d.
The [WB Adjustment] screen appears.
4
3 Adjust the value.
WB Adjustment
Playback Functions
0:0
Cancel
Preview
The following operations are available.
abcd
Moves the adjustment points.
k
Displays the preview.
p/6
During the preview: Magnifies the image.
4 Press e.
5 Select the save destination memory, and then press e.
The image is saved as a new image.
118
OK
Correcting Color Moiré
You can reduce color moiré in images.
1 Display the image to process in the single image display in the
playback mode.
When multiple images are displayed, the selected images are processed.
2 Select [Color Moiré Correction] in the C3 menu or on the
playback function selection screen, and then press d.
The [Color Moiré Correction] screen appears.
3 Adjust the value.
4
Color Moiré Correction
High
Cancel
Preview
OK
The following operations are available.
ab
Selects the correction level.
k
Displays the preview.
p/6
During the preview: Magnifies the image.
4 Press e.
5 Select the save destination memory, and then press e.
The image is saved as a new image.
Caution--------------------------------------------------------------------------------• Some images may not be corrected properly.
• If [Color Moiré Correction] is applied, color loss or color bleeding may occur in images.
119
Playback Functions
Low
Medium
Adjusting the Image Quality
You can adjust the quality level of JPEG images.
1 Display the image to process in the single image display in the
playback mode.
When multiple images are displayed, the selected images are processed.
2 Select [Base Parameter Adj] in the C3 menu or on the playback
function selection screen, and then press d.
The [Base Parameter Adj] screen appears.
4
3 Use h to switch between the normal editing and the
Playback Functions
monotone editing.
4 Adjust the value.
Base Parameter Adj
Brightness
0
0
0
0
0
Cancel
Preview
OK
The following operations are available.
ab
Normal editing: Sets [Brightness], [Saturation], [Hue], [Contrast], or [Sharpness].
Monotone editing: Sets [Brightness], [Filter Effect], [Toning],
[Contrast], or [Sharpness].
cd
Sets a value (±4).
k
Displays the preview.
p/6
During the preview: Magnifies the image.
5 Press e.
6 Select the save destination memory, and then press e.
The image is saved as a new image.
120
Editing Movies
You can cut out or divide a movie file and save as a new file(s).
1 Display the movie to process in the single image display in the
playback mode.
When multiple movies are displayed, the selected movies are processed.
2 Select [Movie Edit] in the C3 menu or on the playback function
selection screen, and then press d.
The [Movie Edit] screen appears.
3 Select [Cut] or [Divide], and then
4
Movie Edit
Cut
Divide
Cancel
OK
Cut
Saves the range specified with the start and end points as
a new file.
Divide
Divides a movie into two files at the specified devision point
and saves as new files.
4 Specify the starting and ending
Cut
Synchronize Points
Switch Points
points or division point.
You can play or pause the movie in the same
manner as when viewing a movie in the
playback mode. (p.59)
00’20” / 00’45”
Cancel
Preview
Divide
OK
Synchronize Points
00’20” / 00’45”
Cancel
121
Preview
OK
Playback Functions
press e.
The following operations are also available.
n
[Cut]: Switches between the starting and ending points.
q
[Cut]: Moves the starting or ending point.
[Divide]: Moves the division point.
h
[Cut]: Moves the starting or ending point to the playback
point.
[Divide]: Moves the division point to the playback point.
k
While the movie is paused: Displays the preview.
5 Press e.
4 6 Select the save destination memory, and then press e.
Playback Functions
The movie file(s) is saved as a new movie(s).
122
Sharing Images
Using the Camera with a Computer
You can connect the camera to a computer using the provided USB cable
(I-USB198) to copy the images from the camera to the computer.
1 Turn the camera off.
2 Open the terminal cover of the
camera, and then connect the USB
cable to the USB terminal.
The camera turns on and enters the playback mode.
The camera is recognized as a device by the computer.
When a memory card is inserted, the files on the memory card are displayed. When a memory card is not inserted, the files in the internal
memory are displayed. Pressing and holding k (7) switches the memory
to play back images.
4 Copy the images to the computer.
The status lamp blinks while images are being transferred.
5 Disconnect the camera from the computer when the copy is
complete.
6 Remove the USB cable from the camera.
Caution--------------------------------------------------------------------------------• Do not remove the USB cable while images are being transferred.
• If the battery level is low, it may take some time until the camera is recognized by the computer.
• The wireless communication function is not available while the camera is
connected to a computer with a USB cable.
123
Sharing Images
3 Connect the USB cable to the USB Type-C port of the computer.
5
Memo----------------------------------------------------------------------------------• When the camera is connected to a computer, it is recognized as a device
with the name “RICOH GR IV”.
• Refer to “Operating Environment” (p.175) for system requirements to connect the camera to a computer.
• When [USB Setting] is set to [License Display] in the E6 menu, you can
check the software license information.
Using the Camera with a Communication
Device
5
The following functions can be used by connecting the camera to a communication device via Bluetooth® and using the RICOH GR series dedicated
app “GR WORLD”.
Sharing Images
Remote Shooting Performs shooting remotely by operating a communication
device.
Image View
Displays the images saved in the camera on the communication device and imports them to the communication device.
Time Synchronization
Synchronizes the date and time displayed on the camera
with the date and time settings of the communication
device.
Power Supply
Control
Turns the camera on and off from by operating the communication device.
Firmware Update Downloads the camera firmware and updates the camera.
Camera Name
Change
Changes the camera name (default setting: MY GR IV).
“GR WORLD” supports iOS and Android™, and can be downloaded from the
App Store or Google Play™. For the supported operating system and other
details, refer to the download site.
124
Memo----------------------------------------------------------------------------------• To download GR WORLD and for more information, refer to
the following website.
https://www.ricoh-imaging.com/gr-world/download/
• When the camera is connected to the communication device via Bluetooth®, the wireless LAN function is turned on
or off according to requests from the app.
• For details on using the camera with the communication device, refer to
the manual of the device used and the “GR WORLD” website.
• The app screen varies depending on the camera model, communication
device operating system, and app version. Note that the specifications of
the app may be changed without notice in order to improve functionality.
Caution---------------------------------------------------------------------------------
Connecting the Camera to a Communication Device
You can connect the camera to a communication device wirelessly via Bluetooth®. Install the RICOH GR series dedicated app “GR WORLD” on the communication device in advance.
1 Turn on the Bluetooth® function of the communication device.
2 Start the GR WORLD on the communication device.
3 Tap [Register new camera] on the home screen of the app.
4 Select [GR IV], and then tap [This is the first time].
125
5
Sharing Images
• The wireless LAN function does not turn on in the following case.
• In the B mode
• While the camera is connected to a device with the USB cable
• When [Wireless Communication] is set to [Off ] in the E6 menu
• When [Airplane Mode] is set to [On] in the E6 menu
5 Select [Wireless Communication] in the E6 menu, and then
press d.
The [Wireless Communication] screen appears.
6 Select [Action Mode], and then press
d.
Wireless Communication
Off
Action Mode
Pairing
Communication Info.
Sharing Images
7 Select [On], and then press e.
8 Select [Pairing], and then press d.
5
9 Select [Execute Pairing], and then
press d.
Pairing
Execute Pairing
Paired Devices
10 Tap [Search for cameras] on the app.
[Device Name] of the camera is displayed.
11 Tap [Device Name] of the camera.
[Authentication Code] is displayed on the camera and app.
12 Check that the displayed authentication codes match, and then
tap [Pairing] or [OK] on the app.
13 Press e of the camera.
The camera and the communication device
are paired, and the pairing completion
screen appears.
The connection status icon appears when
the camera is connected to the communication device via Bluetooth®.
100
1/400
126
F5.6
400
Caution--------------------------------------------------------------------------------• Pairing is not possible in the following cases.
• While the camera is connected to a device with the USB cable
• When [Wireless Communication] is set to [Off ] in the E6 menu
• When [Airplane Mode] is set to [On] in the E6 menu
• When using a wireless connection, observe local laws and regulations governing radio communication.
• In locations where wireless communication functions cannot be used,
such as on an airplanes, set [Airplane Mode] to [On] in the E6 menu.
Memo-----------------------------------------------------------------------------------
About the Wireless LAN
• Available frequency bands vary depending on the country.
• The 5 GHz band is restricted for outdoor use in some countries.
127
5
Sharing Images
• The taken images can be transferred to the communication device by setting a transfer reservation in [File Transfer] in the C2 menu. (p.109) You
can also set transfer reservations automatically for taken images. (p.128)
When [Import images] is tapped on the app, transfer starts after the connection via wireless LAN is established.
• Selecting [Paired Devices] on the screen in Step 6 displays the list of paired
communication devices. You can cancel pairing with each device by pressing h on this screen. The pairing can be established with up to six communication devices.
• Selecting [Communication Info.] on the screen in Step 3 displays the camera’s [Device Name].
• The frequency band can be changed using the RICOH GR series dedicated
app.
Setting Functions Linked with the Communication Device
You can select the functions to be linked to the communication device.
1 Select [Smartphone Link] in the E6 menu, and then press d.
The [Smartphone Link] screen appears.
2 Select the function to link, and then
press d.
5
Smartphone Link
Store Location Info.
Off
Auto Image Transfer
Auto Resize
Image Transfer while Off
Off
Off
Off
The following functions can be selected.
Sharing Images
Store Location Info.
Records the location information of the communication device in taken images.
Auto Image Transfer
Automatically sets the transfer reservation for
taken images after shooting. Select the format of
transferred files.
Auto Resize
Resizes [JPEG Recorded Pixels] of transferred
images to [XS] when set to [On].
Image Transfer while Off Sets whether to continue image transfer even
when the camera is turned off during transfer.
3 Select [On], and then press e.
Repeat Steps 2 to 3.
4 Press f twice.
128
Changing the Settings
Saving Frequently Used Settings
You can use the shooting settings saved in P, Q, and R of the mode
dial.
There are two ways to save the shooting settings: Register the current settings or recall the settings saved in the setting boxes.
The following settings can be saved.
• Exposure mode
• Exposure compensation
• A menu and D menu settings (with exceptions)
Saving the Current Settings
6
You can save the current settings to the mode dial.
Changing the Settings
1 Set the exposure mode and all the necessary settings to save.
2 Select [Assign User Mode Dial] in the
User Mode
D1 menu, and then press d.
The [Assign User Mode Dial] screen appears.
Assign User Mode Dial
Save User Mode Box
Load User Mode Box
Rename User Mode
Clear User Mode Assign.
Exposure Setting
ADJ Mode Setting
3 Select from [USER1] to [USER3], and
then press e.
Assign User Mode Dial
Assigns the current settings
to Mode Dial.
USER1:
USER2:
USER3:
Cancel
129
OK
4 Select whether to enter a user mode name, and then press e.
When [Enter Name] is selected, the text entry screen appears.
When [Cancel] is selected, proceed to Step 7.
5 Enter a user mode name.
Up to 32 single-byte alphanumeric characters and symbols can be entered.
Text input cursor
q
Change the
character type.
e
ｗ
a
r
t
y
u
i
o
s
d
f
g
h
j
k
z
x
c
v
b
n
m
Delete one character.
Finish the text entry.
123
Cancel
6
p
l
OK
The following operations are available.
Changing the Settings
abcd
Moves the text selection cursor.
p/6
Moves the text selection cursor up and down.
q
Moves the text selection cursor right and left.
e/n
Enters a character selected with the text selection
cursor.
You can also use the touch screen for the operations.
6 After entering the text, move the text selection cursor to 1,
and then press e.
The confirmation screen appears.
7 After checking the setting, press e.
The D1 menu reappears.
Memo----------------------------------------------------------------------------------• If a name is not entered, the registration date and time are used as the
user mode name.
• To change the user mode name, select [Rename User Mode] in the D1
menu.
• To delete the user mode settings, select [Clear User Mode Assign.] in the
D1 menu.
130
Using the Setting Boxes
Saving the Settings in a Setting Box
You can save six different settings in the setting boxes.
1 Set the exposure mode and all the necessary settings to save.
2 Select [Save User Mode Box] in the D1 menu, and then press
d.
The [Save User Mode Box] screen appears.
3 Select from [BOX1] to [BOX6], and
then press e.
Save User Mode Box
BOX1 :
BOX2 :
BOX3 :
BOX4 :
BOX5 :
BOX6 :
Cancel
When [Enter Name] is selected, enter the name according to Steps 5 and 6
of “Saving the Current Settings” (p.129).
When [Cancel] is selected, proceed to the next Step.
5 Press e.
The D1 menu reappears.
131
6
Changing the Settings
4 Select whether to enter a box name, and then press e.
OK
Assigning the Settings to the Mode Dial
You can assign the settings saved in a setting box to the mode dial.
1 Select [Load User Mode Box] in the D1 menu, and then press
d.
The [Load User Mode Box] screen appears.
2 Select from [BOX1] to [BOX6], and then press e.
3 Select the mode dial to assign the
Load User Mode Box
settings to from USER1 (P), USER2
(Q), and USER3 (R), and then
press d.
6
Assigns settings saved
in User Mode Box
to Mode Dial.
USER1:
USER2:
USER3:
4 Select whether to enter a user mode name.
Changing the Settings
When [Enter Name] is selected, enter the name according to Steps 5 and 6
of “Saving the Current Settings” (p.129).
When [Cancel] is selected, proceed to the next Step.
5 Press e.
The settings saved in the setting box are assigned to the mode dial.
132
Using the User Mode
1 Set the mode dial to P, Q, or R in the shooting mode.
The user mode guide appears on the shooting screen.
2 Change the settings as necessary.
To change the exposure mode, set [Exposure
Mode] in the A2 menu.
100
USERMODE_NAME_XXXXXX
AF+AE Lock
ISO Setting
Drive Mode
White Balance
Still/Movie
Switch Record Memory
1/400 F5.6
400
Exposure Mode
Program AE
Aperture Priority AE
Shutter Priority AE
Snap Distance Priority AE
Manual Exposure
Cancel
OK
• The settings changed in Step 2 are not saved in the camera. If the mode
dial is turned, the settings are reset to the saved settings. To change the
settings, save the settings in [Save User Mode Box] again.
• If the settings saved in the setting box assigned to the mode dial are
changed, the settings applied to the mode dial are also changed.
133
Changing the Settings
Memo-----------------------------------------------------------------------------------
6
Customizing the Button Functions
Changing the Dial Operation for the Exposure Mode
You can save the exposure settings to be changed when p, q, and 6 are
operated in each exposure mode.
1 Select [Exposure Setting] in the D2 menu, and then press d.
The current settings assigned to p, q, and 6 are displayed on the
[Exposure Setting] screen.
2 Select the exposure mode with the
Exposure Setting
settings to change, and then press d.
---
6
Changing the Settings
3 Select the settings to be changed when p, q, and 6 are
operated.
4 Press e.
The setting changes are applied, and the screen in Step 2 reappears.
Registering Functions to the ADJ. Mode
You can change the settings for “ADJ. mode” of which functions can be easily
used by pressing n (q).
Five functions in the following shooting functions can be registered. (The
functions indicated with a square-bracketed item are the default settings
for the item.)
• Off
• Focus [Setting2]
• Focus Limiter
• Snap Focus Distance
• File Format [Setting4]
• Aspect Ratio [Setting5]
• Crop
• JPEG Recorded Pixels
• AE Metering [Setting3]
• ISO Setting
• Flash Mode
• Flash Output
• Drive
• Self-timer
• White Balance
• Image Control [Setting1]
• One Push AE in M Mode
• Touch AF
• Outdoor View Setting
• Framerate
134
1 Select [ADJ Mode Setting] in the D2 menu, and then press d.
The [ADJ Mode Setting] screen appears.
2 Select from [Setting1] to [Setting5],
and then press d.
ADJ Mode Setting
Setting1
Setting2
Setting3
Setting4
Setting5
3 Select the function to register, and
then press e.
The setting changes are applied, and the
screen in Step 2 reappears.
Setting1
Flash Output
Drive
White Balance
Self-timer
Image Control
One Push AE in M Mode
Cancel
OK
• The settings changed in [ADJ Mode Setting] are enabled in the A mode
only. For the B mode, [Image Control], [Focus], [AE Metering], [Framerate], and [Outdoor View Setting] are registered and cannot be changed.
Memo----------------------------------------------------------------------------------• Refer to “Using the ADJ. Mode” (p.24) for how to use the ADJ. mode.
135
6
Changing the Settings
Caution---------------------------------------------------------------------------------
Changing the Functions of the Fn Button
You can change the functions for when h, b, c, d, or k is pressed.
The following functions can be registered to each button. (The functions indicated with a square-bracketed item are the default settings for the item.)
6
Changing the Settings
• Off
• Focus
• Set MF
• Set Snap
• Set Tracking AF
• Enable AF*1 *2
• AF+AE Lock*1 *2 [Fn Button]
• AE Lock*1 *2
• Face/Eye Detection
• Focus Limiter
• Snap Focus Distance
• Switch Record Memory [Hold Movie
Button]
• File Format
• JPEG Ž RAW
• JPEG Ž RAW+
• Aspect Ratio
• Crop
• JPEG Recorded Pixels
• Framerate
• Still/Movie [Movie Button]
• AE Metering
• ISO Setting [ISO Button]
• Flash Mode
• Flash Output
• ND Filter
• Drive Mode [Drive Button]
• Drive
• Continuous Shooting
• Self-timer
• White Balance [White Balance Button]
• Image Control
• Shake Reduction
• One Push AE in M Mode*1 *2
• 4-way Controller Action
• Touch AF
• Outdoor View Setting
• Enable Sleep Mode
• Airplane Mode*3
• Preview*3
*1 The operation to be performed when the button is pressed can be set.
*2 The function cannot be registered to [Movie Button] and [Hold Movie Button].
*3 The function can only be registered to [Hold Movie Button].
136
1 Select [Fn Button Setting] in the D2 menu, and then press d.
The [Fn Button Setting] screen appears.
2 Select the button to change the
Fn Button Setting
setting of, and then press d.
Fn Button
ISO Button
Drive Button
3 Select the function to register, and
then press e.
The setting changes are applied, and the
screen in Step 2 reappears.
Fn Button
Enable AF
AF+AE Lock
AE Lock
Face/Eye Detection
Focus Limiter
Snap Focus Distance
Cancel
h.
5 Set the operation to be performed
when the button is pressed.
Focus Settings
Same as Shutter Button
Auto-area AF
Zone Select AF
Select AF
Pinpoint AF
Tracking AF
Cancel
137
OK
6
Changing the Settings
4 When a function requiring detailed settings is assigned, press
OK
You can set the operation when one of the following functions is assigned
to the button.
Enable AF
AF+AE Lock
Select the button operation from [Same as Shutter
Button], [Auto-area AF], [Zone Select AF], [Select
AF], [Pinpoint AF], [Tracking AF], and [Continuous
AF] in [Focus Settings].
AE Lock
Set the button operation for [Keep AE Lock]. When
set to [On], AE lock is turned on and off each time
the button is pressed. When set to [Off ], AE lock is
only enabled while the button is pressed. (p.54)
One Push AE in M
Mode
Select the mode to adjust to correct exposure
when the button is pressed in the N mode from
[Program AE], [Aperture Priority AE], and [Shutter
Priority AE]. (p.56)
6 Press e.
6
The screen in Step 2 reappears.
Caution---------------------------------------------------------------------------------
Changing the Settings
• [Enable AF], [AF+AE Lock], [AE Lock], or [One Push AE in M Mode] cannot
be assigned to k.
Memo----------------------------------------------------------------------------------• When the camera is turned on or the mode dial is turned, the current function of the button is displayed. If [Guide Display] is set to [Off ] in the E2
menu, the function is not displayed.
138
Setting the Operation of the Shutter Release Button
You can set the operation when z is pressed in the D2 menu.
Shutter Button
Setting
Select the button operation when z is pressed halfway from [AF+AE Lock], [AE Lock], and [Enable AF].
Shutter Btn.
Confirmation
Set whether to complete the setting by pressing z
halfway when a function is set on the shooting screen
such as in the ADJ. mode. This setting is also applied to
when autofocus is activated using h.
[On]: Completes the setting by pressing z halfway.
[Off ]: Returns to the setting screen after z is pressed
halfway and then released.
6
Changing the Settings
139
Selecting the Settings to Save in the Camera
The functions and values set with this camera are saved even if the camera
is turned off. For the following functions, you can select whether to save the
settings (On) or to reset the settings to their default values (Off ) when the
camera is turned off.
6
Changing the Settings
• ISO Setting
• EV Compensation
• Program Auto Ex
• Focus
• Macro Mode
• Focus Limiter
• Focus Peaking
• AE Metering
• Flash Mode
• Flash Output
• Still/Movie
• Drive
• Self-timer
• AA Filter Simulator
• Aspect Ratio
• Crop
• White Balance
• Image Control
• ADJ Mode Setting
• Shooting Info. Display
• Playback Info. Display
• Image for Playback
• Outdoor View Setting
Make settings in [Memory] in the D2 menu.
Press n to turn saving on or off.
Memory
ISO Setting
EV Compensation
Program Auto Ex
Focus
Macro Mode
Focus Limiter
Cancel
OK
Memo----------------------------------------------------------------------------------• When [Reset] is performed in the E11 menu, all [Memory] settings are
reset to the default values.
140
Display and Sound Settings
Setting the Information Displayed During Shooting/
Playback
You can set the information displayed when the display is switched using
j in the shooting or playback mode.
1 Select [Shooting Info. Display] or [Playback Info. Display] in the
D3 menu, and then press d.
The [Shooting Info. Display] or [Playback Info. Display] screen appears.
For [Playback Info. Display], proceed to Step 3.
2 For [LCD Display], use cd to select a
display mode, and then press n to
turn the display on or off.
Shooting Info. Display
LCD Display
Histogram
3 Use abcd to select a display item, and then press n to
turn it on or off.
[Shooting Info. Display]
Histogram
Displays the histogram.
Grid Guide
Displays the grid guide.
Highlight Alert
Blinks areas expected to be overexposed in red during
shooting.
Electronic Level
Displays the indicator for checking camera tilt.
141
6
Changing the Settings
Grid Guide
The display can be set for the display modes
Highlight Alert
[Standard Info. Display], [Simplified Info.
Electronic Level
Display], [No Information Display], and
Cancel
OK
[Display Off ].
The display modes without a check mark are
not displayed when j is pressed in the shooting mode. Turn on at least
one display mode.
[Playback Info. Display]
Playback Info. Display
Histogram
Grid Guide
Highlight Alert
Cancel
Histogram
Displays the histogram for the image.
Grid Guide
Displays the grid guide.
Highlight Alert
Blinks overexposed areas in red.
OK
4 Press e.
Setting the Instant Review Display
6
Changing the Settings
You can set the information displayed in “Instant Review” that displays the taken image
immediately after shooting in [Instant Review]
in the D3 menu.
Instant Review
Display Time
0.5sec.
Zoom Review
Delete
Off
Off
Display Time
Sets the display time of Instant Review.
When set to [Hold], the image is displayed until z is
pressed halfway or another operation is performed.
Zoom Review
Allows images to be magnified by turning p to the right or
pressing n or the + side of 6 during Instant Review.
Delete
Allows images to be deleted by pressing i during Instant
Review.
The initial magnification when magnifying images in Instant Review or single image display in the playback mode can be set in [Quick Zoom] in the
D3 menu. Select the magnification from [x4], [x8], [x16], and [100%].
142
Setting the Live View Display
You can set the following items for the Live
View display in the D3 menu.
Display Customization
Instant Review
0.5sec.
Quick Zoom
Focus Magnification
100％
On
Grid Style
Electronic Level Type
Electronic Level Design
Type1
Flicker Reduction
50Hz
Sets the line type when displaying the grid guide. Select
the type from [3x3 Grid] and [4x4 Grid].
Electronic Level Type
Sets whether to display the horizontal level only, or the
horizontal level and tilt (vertical direction).
Electronic Level
Design
[Type1]: Displays the bar at the bottom of the screen.
[Type2]: Displays the scale at the bottom of the screen.
[Type3]: Displays the bar in the center of the screen.
Flicker Reduction
Cuts down on the Live View screen flicker by setting the
power frequency.
Setting the Brightness and Tone of the Monitor
LCD Setting
You can set [Brightness], [Saturation], [Adjust:
Blue-Amber], and [Adjust: Green-Magenta] in
[LCD Setting] in the E3 menu.
Brightness
Cancel
143
OK
6
Changing the Settings
Grid Style
Outdoor View Setting
If the monitor display is difficult to see when
you take images outdoors or in other situations, you can adjust the brightness of the
monitor in [Outdoor View Setting] in the E3
menu.
Outdoor View Setting
Cancel
OK
Memo----------------------------------------------------------------------------------• This function can be registered to [ADJ Mode Setting] in the D2 menu.
(p.134)
Setting the Lamp
You can set the lamp illumination in the E4
menu.
6
Indicator Lamps
Power Button Lamp
Count Down
Sound Effects
Changing the Settings
Volume
Wireless Communication
Airplane Mode
On
On
2
On
Off
Smartphone Link
Power Button Lamp Sets whether to turn the power button lamp on while the
power of the camera is on.
Count Down
Sets whether to blink the self-timer lamp when shooting
using [Self-timer] of [Drive Mode].
144
Setting the Sound Effects
You can set the sound effects in the E5 menu.
Sound Effects Setting
Sound Effects
Volume
Wireless Communication
Airplane Mode
2
On
Off
Smartphone Link
USB Setting
Auto Power Off
1 min.
Sound Effects
[All]: Outputs the shutter sound, in-focus sound, timer
countdown sound, and switching sound of turning the
wireless LAN on and off.
[Shutter Sound Only]: Outputs the shutter sound only.
Volume
Sets the sound volume. When set to [0], all sound effects
are turned off.
6
Changing the Settings
145
Power Saving Settings
Automatically Turning the Power Off
The camera turns off automatically if no operations are performed for the set time. You
can set the time until the camera turns off to
[1min.], [3min.], [5min.], [10min.], [30min.], or
[Off ] in [Auto Power Off ] in the E7 menu.
To resume operation, press the power button
or g.
Auto Power Off
1min.
3min.
5min.
10min.
30min.
Off
Cancel
OK
Memo-----------------------------------------------------------------------------------
6
Changing the Settings
• [Auto Power Off ] is not available in the following cases.
• During movie recording or playback
• During shooting with [Interval Shooting] or [Interval Composite] of
[Drive Mode]
• During data processing
• During image transfer
• While the camera is connected to a computer
• While the camera is connected to GR WORLD
146
Dimming the Display
The camera dims the display automatically if
no operations are performed. The following
items can be set in the E7 menu.
Power Supply Settings
Auto Power Off
1min.
Sleep Mode
30sec.
LCD Auto Dim
About This Device
Certification Marks
Pixel Mapping
On
Dust Removal
Sleep Mode
Turns the monitor off automatically if no operations are
performed for the set time. The status lamp lights in the
sleep mode.
You can set the time until the monitor turns off to [3sec.],
[10sec.], [30sec.], [1min.], [3min.], [5min.], [10min.],
[30min.], or [Off ].
LCD Auto Dim
Dims the display automatically if the camera is not operated for five seconds.
You can set this function to [On] or [Off ].
Memo----------------------------------------------------------------------------------• When [Enable Sleep Mode] is registered to a button in [Fn Button Setting]
in the D2 menu (p.136), the camera enters the sleep mode immediately
when the button is pressed.
• [Sleep Mode] is not available in the following cases.
• During shooting with [Interval Shooting] or [Interval Composite] of
[Drive Mode]
• During movie recording or playback
• While an AV device is connected to the camera
• While the camera is connected to GR WORLD
• [LCD Auto Dim] is not available in the following cases.
• During shooting with [Interval Shooting] or [Interval Composite] of
[Drive Mode]
• During Instant Review
• In the playback mode
• While an AV device is connected to the camera
147
Changing the Settings
When the camera is operated, the original brightness is restored.
6
File Management Settings
Specifying the Folder/File Settings
By default, files and folders are automatically named as follows.
File Name
R0000001.JPG to R0999999.JPG
Folder Name
100 to 999
When the file number exceeds R09999, the next folder is created and
the file number becomes R00001. If the file number exceeds R09999
when the folder number is 999, no more files can be stored on the memory
card currently inserted.
You can change the file and folder names.
Create New Folder
6
When [Create New Folder] is selected in the E1 menu, a folder is created
with a new number when the next image is saved.
Changing the Settings
Caution--------------------------------------------------------------------------------• You cannot successively create multiple folders.
Memo----------------------------------------------------------------------------------• A new folder is automatically created during shooting with [Interval
Shooting] or [Interval Composite] of [Drive Mode].
148
Folder Name
When images are taken with the camera, a folder is automatically created
and the taken images are stored in it. Each folder name consists of a sequential number from 100 to 999 and a string of five characters.
You can change the character string in the folder name.
1 Select [Folder Name] in the E1 menu, and then press d.
The [Folder Name] screen appears.
2 Select [Date] or [Optional] for [Folder
Name].
Folder Name
Folder Name
Optional
Enter Text
RICOH
100RICOH
Assigns four digits of the month and day of the shooting
date after the folder number.
The assigned month and day are according to the date
format set in [Date Adjustment] in the E10 menu.
Example) 101_0125: Images taken on January 25th
Optional
Assigns a freely defined string of five characters after the
folder number.
(Default: RICOH)
Example) 101RICOH
When you select [Date] or do not need to change the character string,
proceed to Step 6.
3 Press b to select [Enter Text], and then press d.
The text-entry screen appears.
149
6
Changing the Settings
Date
4 Enter a folder name.
Up to five single-byte alphanumeric characters can be entered.
Text input cursor
RICOH
Q
Change the
character type.
E
Ｗ
A
R
T
S
D
F
Z
X
C
123
Y
U
I
O
G
H
J
K
V
B
N
M
P
L
Delete one character.
_
Finish the text entry.
Cancel
OK
The following operations are available.
6
abcd
Moves the text selection cursor.
p/6
Moves the text selection cursor up and down.
q
Moves the text selection cursor right and left.
e/n
Enters a character selected with the text selection
cursor.
Changing the Settings
You can also use the touch screen for the operations.
5 After entering the text, move the text selection cursor to 1,
and then press e.
The confirmation screen appears.
6 After checking the entered name, press e.
The screen in Step 2 reappears.
Memo----------------------------------------------------------------------------------• A folder with a new number is created when the next shooting is performed after the folder name is changed.
Caution--------------------------------------------------------------------------------• The maximum folder number is 999. If the folder name is changed or a new
folder is created after the folder number reaches 999, you cannot take new
images. Also, you cannot take new images when the file number reaches
9999.
150
File Name
One of the following character strings is used as the file name prefix for still
images depending on the [Color Space] (p.91) setting in the A4 menu.
Color Space
File Name
sRGB
R0.JPG
AdobeRGB
_R.JPG
You can change the first two characters of file names from “R0”.
1 Select [File Name] in the E1 menu, and then press d.
The [File Name] screen appears.
2 Use cd to select A or B, and then
File Name
use ab to specify a character string.
Uppercase alphanumeric characters and “_”
can be specified.
R
0
R0000001.JPG
R
0
R0000001.MOV
6
_R000001.JPG
OK
Memo----------------------------------------------------------------------------------• When [Color Space] is set to [AdobeRGB], the file name prefix is “_” and the
first character of the specified character string is used for the file name.
151
Changing the Settings
3 Press e.
Cancel
Sequential Numbering
In [Sequential Numbering] in the E1 menu,
you can set whether to continue the sequential numbering for folder and file names even
when a new folder is created or when the
memory card is changed.
Sequential Numbering
Folder & File
File
Off
Cancel
When a new
Sequential Numbering folder is created
File No.
OK
When the memory card is changed
Folder Name
File No.
Folder & File
Continue
Continue
Continue
File
Continue
Reset
Continue
Off
Reset
Reset
Reset
6
Changing the Settings
Reset Numbering
When a new image is taken after [Reset Numbering] is performed in the E1
menu, a folder with a new folder number is created and the file number starts
from 0001.
Memo----------------------------------------------------------------------------------• When the file number reaches 9999, a new folder is created and the file
number is reset.
• When a memory card is not inserted, the file number for images in the
internal memory is reset.
152
Setting the Copyright Information
You can set the copyright information embedded in the Exif data.
1 Select [Copyright Information] in the E1 menu, and then press
d.
The [Copyright Information] screen appears.
2 Select [On] or [Off] in [Embed
Copyright Information
Copyright Data], and then press e.
Embed Copyright Data
Off
Copyright Holder
XXXXXXXXXXXXXXX
3 Press d in [Copyright Holder].
The text-entry screen appears.
6
Up to 32 single-byte alphanumeric characters and symbols can be entered.
Text input cursor
q
Change the
character type.
e
ｗ
a
r
t
y
u
i
o
s
d
f
g
h
j
k
z
x
c
v
b
n
m
p
l
Delete one character.
Finish the text entry.
123
Cancel
OK
The following operations are available.
abcd
Moves the text selection cursor.
p/6
Moves the text selection cursor up and down.
q
Moves the text selection cursor right and left.
e/n
Enters a character selected with the text selection
cursor.
You can also use the touch screen for the operations.
153
Changing the Settings
4 Enter the copyright holder name.
5 After entering the text, move the text selection cursor to 1,
and then press e.
The confirmation screen appears.
6 After checking the entered name, press e.
The screen in Step 2 reappears.
Memo----------------------------------------------------------------------------------• You can check the Exif information in [Detailed Info. Display] (p.21) in
the playback mode.
6
Changing the Settings
154
Appendix
Attaching Optional Accessories
Conversion Lens/Lens Adapter
Remove the ring cap before using the wide conversion lens (GW-4) and lens
adapter (GA-3).
For details on handling optional accessories, refer to the user’s manual provided with each product.
Removing the Ring Cap
Turn the camera off and rotate the
cap counterclockwise until it can be
removed. Do not touch the converter
pins (1).
For removing the lens adapter, turn it
counterclockwise in the same manner.
1
2
Attaching the Ring Cap
With the camera turned off, align the marking on the ring cap (3) with the
marking on the camera body (2), and turn the ring cap clockwise until it
clicks.
Caution--------------------------------------------------------------------------------• When using a lens adapter, always use the Lens Adapter GA-3. If other
adapters are used, the original optical performance of the camera is not
obtained.
155
Appendix
3
7
Troubleshooting
Power Supply
Problem
Cause
Solution
The camera does The battery is not
not turn on.
inserted.
The battery is exhausted.
Charge the battery and
correctly insert it into the
camera .
Page
p.42
The battery is not
inserted in the correct
orientation.
7
Appendix
The battery is incompatible.
Use the dedicated
rechargeable battery
(DB-120).
—
The AC adapter is not
correctly connected.
Connect the AC adapter
correctly.
—
Turn the camera back on.
The camera turns The [Auto Power Off ]
off during use.
function has been
activated because the
camera was not operated for a certain period
of time.
p.44
The battery is exhausted.
Charge the battery.
The camera does The camera is malfunc- Take the battery out and
not turn off.
tioning.
insert it again.
p.42
p.40
The low battery The battery is incomindicator is
patible.
displayed or the
camera turns off
even when a fully
charged battery
is installed.
Use the dedicated
rechargeable battery
(DB-120).
—
The battery can- The battery has failed.
not be charged.
Replace the battery with a
new one.
—
Let the battery cool down
to ambient temperature.
—
The battery is hot.
156
Problem
Cause
The battery is
Ambient temperature is
quickly exhaust- very high or very low.
ed.
Solution
Page
—
—
Shooting
Problem
Cause
Solution
Page
Shooting cannot The battery is exhaust- Charge the battery.
be performed by ed.
pressing z. The camera is turned off Turn the camera on or
p.42
The memory card is not Perform [Format] in the
formatted.
E1 menu.
p.46
or not in the shooting
mode.
press z to switch the
camera to the shooting
mode.
p.44
The memory card is full. Insert a new card, or delete p.103
unwanted files.
Insert a new memory card.
—
The memory card
contacts are dirty.
Clean with soft, dry cloth.
—
Images cannot
Confirmation time is
be checked after too short.
shooting.
157
Change the [Display Time] p.142
setting of [Instant Review]
in the D3 menu.
7
Appendix
The memory card has
reached end of its
working life.
Problem
The monitor is
blank.
The camera is
unable to focus
in autofocus
mode.
7
Images are
blurred.
Cause
Solution
Page
The monitor brightness Adjust the brightness of
is dark.
the monitor in the E3
menu.
p.143
The monitor is off.
Press j to turn the
monitor on.
p.20
An AV device is connected to the camera.
Remove the cable from the p.102
camera.
The lens is dirty.
Clean with soft, dry cloth.
—
The subject is not at
center of frame.
Lock the focus for shooting.
—
The subject is not suitable for autofocus.
Lock the focus or set the
focus mode to [MF] for
shooting.
p.64
The subject is too close. Use the macro mode
or move away from the
subject.
p.65
The camera was moved Hold the camera with your
when z is pressed. elbows pressed against
your body, or use a tripod.
—
Appendix
When shooting in a
dark place, the shutter
speed slows down and
images taken become
easily blurred.
Use a flash, or set [ISO
Setting] to a high ISO
sensitivity.
p.70
p.69
The flash does
not discharge.
A function preventing
flash operation is
selected.
Check the settings and
mode.
—
The flash does
not illuminate
the subject.
The subject is dark.
Adjust the flash exposure.
Flash output is not
appropriate.
158
p.71
Problem
Images are too
bright.
Cause
Solution
Flash output is not
appropriate.
Adjust the flash exposure,
move away from the
subject, or use a different
light source.
Page
p.71
p.143
The monitor brightness Adjust the brightness of
is not appropriate.
the monitor in the E3
menu.
p.143
The exposure compensation is set to a
negative value.
Change the exposure
compensation value.
p.53
The colors of
images are
unnatural.
The camera is unable
to adjust white balance
for shooting conditions using auto white
balance.
Include a white object with p.75
the subject or select the
settings other than [Auto
White Balance] for [White
Balance].
The monitor
brightness
changes during
autofocus.
Ambient lighting is
This is normal and does
poor or differs from that not indicate a malfunction.
used for autofocus.
Images are too
dark.
Electronic level Electronic level indicaindicators are not tors are hidden.
displayed.
Check the [Shooting Info. p.141
Display] setting in the D3
menu.
The image is not The camera was moving Do not move the camera
level although
during shooting
during shooting.
level indicator
because you were on a
showed that the moving object or due to
camera was level. other causes.
The subject is not level. Check the subject.
159
—
—
—
7
Appendix
The monitor brightness Adjust the brightness of
is not appropriate.
the monitor in the E3
menu.
Playback/Deletion
7
Problem
Cause
Solution
Shooting information is not
displayed.
Information display is
set to [No Information
Display].
Press j to switch the
information displayed on
the screen.
Dust or dirt
particles appear
in images.
The sensor is dirty or
dusty.
Perform [Dust Removal] in
the E 9 menu.
The Dust Removal function
can be set to be performed
every time the camera is
turned on and off.
—
Pixel defects
such as bright
spots and dark
spots appear in
the image.
There are defective
pixels in the sensor.
Perform [Pixel Mapping] in
the E 9 menu.
It takes about 30 seconds
to correct the defective
pixels, so be sure to install
a fully charged battery.
—
Images are not
displayed on an
AV device.
The cable is not correct- Follow the correct proce- p.102
ly connected.
dure to connect the cable.
Appendix
The input setting of the Check the AV device
AV device is incorrect. settings.
The images on
The inserted memory
the memory card card is not formatted
cannot be played with this camera.
back.
Images are not
The memory card
displayed on the contacts are dirty.
monitor.
The card is malfunctioning.
160
Page
p.20
—
Insert a memory card
formatted using [Format]
in the E1 menu of this
camera.
p.46
Clean with soft, dry cloth.
—
There is not problem with
the camera if images in
another memory card
can be played back with
this camera. Do not use a
memory card that has a
problem.
—
Problem
The monitor
turned off.
Cause
Solution
The battery is exhausted.
Charge the battery.
The [Auto Power Off ]
Turn the camera back on.
function has been
activated because the
camera was not operated for a certain period
of time.
File(s) cannot be [Protect] is set for the
deleted.
image(s).
Page
p.42
p.44
Cancel the protection with p.105
[Protect] in the C2 menu.
7
Appendix
161
Others
Problem
The memory
card cannot be
inserted.
Cause
Solution
The card is not in the
correct orientation.
Camera controls The battery is exhausthave no effect.
ed.
Date is not set
correctly.
Page
Insert the memory card in p.40
the correct orientation.
Charge the battery.
p.42
The camera is malfunc- Turn the camera off and
tioning.
back on.
p.44
Take the battery out and
insert it again.
When the AC adapter is
used, reconnect it.
p.40
Date and time are not
set correctly.
Set date and time correctly p.45
in the E10 menu.
p.45
If the battery is removed
for more than about five
days, the date setting will
be lost.
Set date and time correctly
in the E10 menu.
The date setting The battery was
has been reset. removed.
7
Appendix
162
Error Messages
Error Message
Memory card full.
Description
The memory card is full and no more images can be
saved. Insert a new memory card or delete unwanted
files. (p.103)
Internal memory full. The internal memory is full and no more images can be
saved. Insert a memory card or delete unwanted files.
(p.103)
No image.
There are no images that can be played back in the
memory card and internal memory.
No card in the
camera.
There is no memory card inserted in the camera.
Memory card error.
The memory card has a problem, and shooting and
playback are impossible. You may be able to play back
the images with a computer.
Internal memory
error.
The internal memory has a problem. Format the internal
memory. (p.46)
Cannot use this card. A memory card not compatible with this camera is
inserted.
Unable to store
image.
The memory card or internal memory has a problem,
and the image cannot be saved.
Image folder cannot
be created.
The maximum folder number (999) is being used, and no
more images can be saved. Insert a new memory card or
format the memory card or internal memory. (p.46)
This image cannot be You are trying to play back an image in a format not
displayed.
supported by this camera. You may be able to play back
the images with a computer.
163
7
Appendix
Card is not formatted. The memory card you have inserted is unformatted or
has been previously used on another device and is not
compatible with this camera. Use the card after formatting it with this camera. (p.46)
Error Message
Description
This image cannot be You are trying to magnify an image that cannot be
magnified.
magnified.
This image cannot be This message appears when you try to perform a
processed.
function in the C3 menu for the images shot using
other cameras, or [Resize] or [Cropping] for the minimum
file-size images.
This function cannot Process each image one by one.
process multiple
images as a batch.
7
Appendix
This function is not
available in the
current mode.
Set the function after switching to the A mode.
Alternatively, set [Airplane Mode] to [Off ] in the E6
menu.
This function is not
available except in
User Mode.
Set the function after setting the mode dial to P, Q,
or R.
The camera will
turn off to prevent
damage from overheating.
The camera will turn off because its internal temperature
is too high. Leave the camera turned off until it cools
down before turning on the camera again.
Update failed.
The update could not be performed correctly. Turn the
camera off and back on, and then perform the update
again.
Unable to update
There is a problem with the firmware update file. Downfirmware. There is
load the update file again, and then perform the update.
a problem with the
firmware update file.
Insufficient battery
power remaining
to activate Pixel
Mapping.
These messages appear if you try to perform each function when the battery level is insufficient. Install a fully
charged battery.
Insufficient battery
power remaining to
update the firmware.
Insufficient battery
power remaining
to reset to factory
defaults.
164
Error Message
Pairing failed. Check
Action Mode.
Description
Bluetooth® pairing failed. Check the settings. (p.125)
Pairing failed. Check
Airplane Mode.
Pairing failed because
the camera is currently connected via USB.
7
Appendix
165
Main Specifications
Camera
Lens
Lens Construc- 7 elements in 5 groups (3 aspherical lens
tion
elements)
Focal Length
and Aperture
Image Cap- Image Sensor
ture Unit
18.3 mm (approx. 28 mm in 35 mm equivalent
focal length); F2.8 to F16
Type: Primary color filter, CMOS
Size: 23.3 mm × 15.5 mm
Effective Pixels Approx. 25.74 megapixels
7
Appendix
Sensitivity
(Standard
Output)
ISO 100 to ISO 204800: Auto (ISO Auto Lower/
Upper Limit and Minimum Shutter Speed can be
set), Manual
Image Stabilization
Sensor-shift shake reduction “SR” (5-axis)
AA Filter Simulator
Moiré reduction using the SR unit (Off, Low, High)
Dust Removal
Image sensor cleaning using ultrasonic vibrations “DR II”
166
File Formats
File Format: RAW (DNG) 14bit, JPEG (Exif 2.3
compliant), DCF 2.0 compliant
Color Space: sRGB, AdobeRGB
Recorded Pixels:
[3:2] L (26M: 6192 × 4128)
M (16M: 4944 × 3296)
S (8.2M: 3504 × 2336)
XS (2.5M: 1920 × 1280)
[4:3] L (23M: 5504 × 4128)
M (15M: 4400 × 3296)
S (7.3M: 3120 × 2336)
XS (2.8M: 1920 × 1440)
[1:1] L (17M: 4128 × 4128)
M (11M: 3296 × 3296)
S (5.5M: 2336 × 2336)
XS (1.6M: 1280 × 1280)
[16:9] L (22M: 6192 × 3480)
M (14M: 4944 × 2784)
S (6.9M: 3504 × 1968)
XS (2.1M: 1920 × 1080)
Movie
File Format: MPEG4 AVC/H.264 (MOV)
Recorded Pixels: Full HD (1920 × 1080,
60p/30p/24p)
Sound Recording: Built-in stereo microphone
Recording Time: Up to 4 GB or 25 minutes; automatically stops recording if the internal temperature of the camera becomes high
Storage Medium
Internal memory (approx. 53 GB), microSD/microSDHC/microSDXC memory card (microSDHC
memory card and microSDXC memory card
conform to UHS-I standards)
167
7
Appendix
Still Image
Focus
Type
Hybrid AF (image plane phase-matching detection and contrast detection)
Focus Mode
Auto-area AF, Zone Select AF, Select AF, Pinpoint
AF, Tracking AF, Continuous AF, MF, Snap (0.3 m,
1 m, 1.5 m, 2 m, 2.5 m, 3.5 m, 5 m, Z), Z
Focus Limiter
Near Side, Far Side, Off
Full Press Snap Shooting by focusing at the Snap distance with
a single press of the shutter release button or a
touch on the monitor
Face/Eye
Detection
On, Use only in Auto-area AF, Off
Focus Range
Normal mode: Approx. 0.1 m to Z
(from lens face) Macro mode: Approx. 0.06 to 0.15 m
Exposure
Control
Exposure Mode Program AE, Aperture Priority AE, Shutter Priority
AE, Snap Distance Priority AE, Manual Exposure
Metering Mode Multi-segment metering, Center-weighted
metering, Spot metering, Highlight-weighted
metering
7
Shutter Speed
1/4000 to 30 sec. (limit by aperture — F2.8: up
to 1/2500 sec., F5.6 or higher: up to 1/4000 sec.),
Timed exposure (10 sec. to 20 min.), Bulb, Time
Appendix
Exposure Com- Still image: ±5 EV, 1/3 EV steps
pensation
Movie: ±2 EV, 1/3 EV steps
ND Filter (2 EV) Auto, On, Off
White Balance
Fine Adjustment
Auto White Balance, Auto WB (Warmth Pri.),
Auto WB (White Pri.), Daylight, Shade, Cloudy,
Fl. - Daylight Color, Fl. - Daylight White, Fl. - Cool
White, Fl. - Warm White, Tungsten, CTE, Manual
White Balance, Color Temperature, Custom 1,
Custom 2, Custom 3
Adjustable ±14 steps on A-B axis or G-M axis
168
Drive Mode Drive
Shooting
Functions
Single Frame Shooting, Continuous Shooting,
Bracketing, Multi-exposure, Interval Shooting,
Interval Composite
Self-timer
10 sec., 2 sec., Off
Crop
Off, 35mm, 50mm
Image Control
Standard, Vivid, Monotone, Soft Monotone, Hard
Monotone, Hi-Contrast B&W, Negative Film,
Positive Film, Cinema (Yellow), Cinema (Green),
Cross Processing, Bleach Bypass, Retro, HDR Tone,
Custom 1, Custom 2, Custom 3
Adjustment parameters: Saturation, Hue, High/
Low Key Adjustment, Contrast, Contrast (Highlight), Contrast (Shadow), Sharpness, Shading,
Clarity, Toning, Filter Effect, Grain Effect, HDR
Tone Level, Color Tone
* Adjustable parameters vary depending on the
selected image setting.
Dynamic Range Highlight Correction, Shadow Correction
Correction
Slow Shutter Speed Noise Reduction, High-ISO
Noise Reduction
Horizon Correction
SR On: Correction up to 1 degree
SR Off: Correction up to 1.5 degrees
Display
Display magnification (4×, 16×), Grid Guide
(3×3 Grid, 4×4 Grid), Histogram, Highlight Alert,
Electronic Level
169
7
Appendix
Noise Reduction
Playback
Functions
Playback View
Single image display, Multi-image display (20
images, 48 images), Display magnification (up to
16×; 100% view and Quick Zoom view available),
Histogram (Y histogram, RGB histogram), Grid
Guide (3×3 Grid, 4×4 Grid), Highlight Alert, Auto
Image Rotation, Folder display, Calendar filmstrip
display
Base Parameter Normal editing, Monotone editing
Adjustment
Adjustment parameters: Brightness, Saturation,
Filter Effect, Hue, Toning, Contrast, Sharpness
* Adjustable parameters vary depending on the
selected edit setting.
7
Appendix
LCD Monitor
RAW Development
RAW image selection options: Single image,
Multiple images, Images in the selected folder,
Images on the selected shooting date
RAW development parameters: JPEG Recorded
Pixels, Aspect Ratio, Color Space, White Balance,
Image Control, Peripheral Illumination Correction, Sensitivity, High-ISO Noise Reduction,
Shadow Correction
Edit
Delete, Protect, Image Rotation, Image Copy, File
Transfer, Resize, Cropping (aspect ratio and slant
adjustments available), Levels Adjustment, White
Balance Adjustment, Color Moiré Correction,
Movie Edit (Cut, Divide), Save movie frame as
JPEG image
Type
3.0-inch wide viewing angle TFT color LCD (aspect ratio: 3:2) with air-gapless tempered glass,
Approx. 1037K dots
Touch Screen
Capacitive sensing type
Adjustments
Brightness, Saturation, Blue/Amber, Green/
Magenta, Outdoor View Setting (Auto, Manual
(±2 steps))
170
Wireless
Standards
LAN Communication
2.4 GHz: IEEE802.11 b/g/n/ax
5.2 GHz: IEEE802.11 a/n/ac/ax (not available in
some regions)
5.8 GHz: IEEE802.11 a/n/ac/ax (not available in
some regions)
Operating Frequency Band
Range
2.4 GHz: 2400 to 2483.5 MHz
5.2 GHz: 5150 to 5250 MHz (not available in some
regions)
5.8 GHz: 5725 to 5850 MHz (not available in some
regions)
Bandwidth
2.4 GHz: 20 MHz
5.2 GHz: 20/40/80 MHz
5.8 GHz: 20/40/80 MHz
Security
Authentication: WPA2™, WPA3™
Encryption: AES
Bluetooth® Standards
Communi- Operating Frecation
quency Band
Range
Bluetooth® v5.3 (Bluetooth Low Energy)
Interfaces
USB Type-C
Battery recharge/Power supply (when using an
optional AC adapter), Data transfer (MTP), Video
output (DisplayPort™ over USB-C (DisplayPort
Alternative Mode))
Hot Shoe
Compatible with dedicated flashes
Flash Mode: Flash On, Flash On+Red-eye, Slowspeed Sync, Slow Sync+Red-eye
Flash Output: Auto, 1/1, 1/4
Lens Adapter
Pin
Available
2400 to 2483.5 MHz
Appendix
171
7
Power
Supply
Battery Type
Rechargeable Battery DB-120
AC Adapter
AC adapter compatible with USB Power Delivery,
AC adapter (K-AC166; optional)
• The camera is compatible with USB Power
Delivery, but is not certified with the USB
Implementers Forum logo.
Battery Life
Number of recordable images: Approx. 250
images
• This is according to the result of testing in
compliance with CIPA standard using a fully
charged rechargeable battery at a temperature of 23°C (73°F). Actual results may vary
depending on the shooting conditions/circumstances.
Playback time: Approx. 240 min.
• This is according to the result of RICOH inhouse testing. Actual results may vary depending on the shooting conditions/circumstances.
Dimensions Dimensions
and Weight
Approx. 109.4 mm (W) × 61.1 mm (H) × 32.7 mm
(D) (4.3 in. (W) × 2.4 in. (H) × 1.3 in. (D)) (excluding operating controls and protrusions)
7
Weight
Appendix
Approx. 262 g (9.2 oz) (including the dedicated
battery and microSD memory card)
Approx. 228 g (8 oz) (body only)
Included Accessories
Rechargeable Battery DB-120, USB Cable
I-USB198, Hand strap O-ST198
Language
English, French, German, Spanish, Portuguese,
Italian, Dutch, Danish, Swedish, Finnish, Polish,
Czech, Hungarian, Turkish, Greek, Russian, Thai,
Korean, Traditional Chinese, Simplified Chinese,
Japanese
172
Rechargeable Battery DB-120
Nominal Voltage
3.85 V
Rated Capacity
1800 mAh, 6.93 Wh
Operating Temperature
0 to 40°C (32 to 104°F)
Storage Temperature
-20 to 45°C (-4 to 113°F)
Dimensions
40.9 mm (W) × 35.4 mm (H) × 10.75 mm (D)
(1.6 in. (W) × 1.4 in. (H) × 0.4 in. (D))
Weight
Approx. 33 g (1.2 oz)
Image Storage Capacity
The following table shows the approximate number of images and recording time (in seconds) of movies that can be saved in the internal memory
and a memory card in various formats.
Still Image
Aspect Ratio
Focal
Length*1
Number of Recorded
Pixels
Internal
Memory
53 GB
Memory
Card
64 GB
L
3:2
—
26M: 6192 × 4128
3,498
3,929
4:3
—
23M: 5504 × 4128
3,943
4,429
1:1
—
17M: 4128 × 4128
5,226
5,870
16:9
—
22M: 6192 × 3480
4,131
4,640
3:2
—
16M: 4944 × 3296
5,422
6,090
4:3
—
15M: 4400 × 3296
6,110
6,862
1:1
—
11M: 3296 × 3296
8,033
9,022
16:9
—
14M: 4944 × 2784
6,475
7,272
3:2
—
8.2M: 3504 × 2336
10,581
11,883
4:3
—
7.3M: 3120 × 2336
12,050
13,534
1:1
—
5.5M: 2336 × 2336
15,494
17,401
16:9
—
6.9M: 3504 × 1968
12,395
13,921
3:2
—
2.5M: 1920 × 1280
33,371
37,479
4:3
—
2.8M: 1920 × 1440
28,922
32,482
1:1
—
1.6M: 1280 × 1280
48,203
54,137
16:9
—
2.1M: 1920 × 1080
39,439
44,294
M
S
XS
173
7
Appendix
File Format/
JPEG Recorded Pixels
26M: 6192 × 4128
995
1,117
16M: 4944 × 3296
1,018
1,143
50 mm
8.2M: 3504 × 2336
1,037
1,165
28 mm
23M: 5504 × 4128
1,001
1,125
35 mm
15M: 4400 × 3296
1,023
1,149
50 mm
7.3M: 3120 × 2336
1,040
1,168
28 mm
17M: 4128 × 4128
1,016
1,141
35 mm
11M: 3296 × 3296
1,030
1,157
50 mm
5.5M: 2336 × 2336
1,045
1,174
28 mm
22M: 6192 × 3480
1,004
1,127
35 mm
14M: 4944 × 2784
1,023
1,149
50 mm
6.9M: 3504 × 1968
1,042
1,171
28 mm
26M: 6192 × 4128
774
870
35 mm
16M: 4944 × 3296
859
964
50 mm
8.2M: 3504 × 2336
947
1,063
28 mm
23M: 5504 × 4128
798
897
35 mm
15M: 4400 × 3296
876
984
50 mm
7.3M: 3120 × 2336
957
1,075
28 mm
17M: 4128 × 4128
850
955
35 mm
11M: 3296 × 3296
915
1,027
50 mm
5.5M: 2336 × 2336
981
1,102
28 mm
22M: 6192 × 3480
809
909
35 mm
14M: 4944 × 2784
883
992
50 mm
6.9M: 3504 × 1968
961
1,080
Focal
Length*1
Number of Recorded
Pixels
RAW
3:2
28 mm
35 mm
1:1
16:9
RAW+
Appendix
Memory
Card
64 GB
Aspect Ratio
4:3
7
Internal
Memory
53 GB
File Format/
JPEG Recorded Pixels
3:2
4:3
1:1
16:9
*1 35 mm equivalent focal length
174
Movie
Recorded Pixels Aspect Ratio Framerate
Full HD
16:9
60p
Number of Recorded Pixels
1920 × 1080
Internal
Memory
53 GB
Memory Card
64 GB
1:26'56"
1:37'38"
30p
2:50'51"
3:11'53"
24p
3:31'44"
3:57'48"
Memo----------------------------------------------------------------------------------• The figures for movies are the total length that can be recorded. The maximum recording time per shooting is 25 minutes or the equivalent of 4 GB.
• The number of images that can be shot may differ from the number of
storable images displayed on the monitor.
• The storage capacity varies depending on the shooting conditions and the
capacity of the memory.
Operating Environment
The USB connection between the camera and a computer has been confirmed to work with the following OSs.
Windows® 11, Windows® 10
Mac
macOS 14 Sonoma, macOS 13 Ventura, macOS 12 Monterey,
macOS 11 Big Sur
175
Appendix
Windows®
7
Using the Camera Abroad
For conditions of use and important points to note when using the camera
overseas, check the product page and FAQ on the RICOH IMAGING website.
7
Appendix
176
Precautions for Use
Camera
Conditions that May Cause Condensation------------------------------------• If you move to an area with a sharply different temperature
• If humidity is high
• In a cold room after the heater has come on, or where the camera is exposed to cold air from an air conditioner or other device
177
7
Appendix
• Do not drop the camera or subject it to physical shocks.
• When carrying the camera, be careful that it does not strike other objects. Particular
care is required to protect the lens and monitor.
• Battery may become hot with extended use. Wait for the battery to cool before removing it from the camera.
• The monitor may be difficult to read in direct sunlight.
• You may notice that monitor varies in brightness or contains pixels that do not light
or that are always lit. This is common to all LCD monitors and does not indicate a
malfunction.
• Do not apply force to the monitor.
• Abrupt changes in temperature may cause condensation, resulting in visible condensation inside the lens or camera malfunction. This can be avoided by placing the camera in a plastic bag to slow the temperature change, and removing it only after the air
in the bag has reached the same temperature of its surroundings.
• To prevent damage to the camera, do not insert objects into the holes in the microphone and speaker coverings.
• Do not allow the camera to get wet. In addition, do not operate it with wet hands. Failure to observe this precaution could result in camera malfunction or electric shock.
• Take a test shot to ensure that the camera is functioning properly before using it on
important occasions such as travel or weddings. We recommend that you keep this
manual and spare batteries at hand.
Rechargeable Battery DB-120
7
Appendix
• This is a lithium-ion battery.
• The battery is not fully charged at the time of purchase, so be sure to charge the
battery before use.
• Do not open or damage the battery as this can result in fire or injury. In addition, do
not heat the battery above 60°C (140°F) or expose the battery to fire.
• Due to the battery characteristics, the battery usage time may be shortened when
used in a cold environment, even if the battery is fully charged. Keep the battery
warm by placing it in a pocket or have a backup battery ready.
• When not in use, be sure to remove the battery from the camera or battery charger.
A small amount of current can leak from the battery even when the power is off, creating excessive discharge and making the battery unusable. If the battery is removed
for more than five days, the date and time settings will be lost. In this case, reset the
date and time.
• If the battery is not used for a long time, charge the battery for 15 minutes once a
year before storing.
• Store the battery in a dry, cool place with an ambient temperature between 15°C and
25°C (59°F and 77°F). Avoid storing in extreme high or low temperatures.
• After charging the battery, do not immediately charge it again.
• Charge the battery at an ambient temperature between 10°C and 40°C (50°F and
104°F). Charging the battery at a high temperature can deteriorate the battery.
Charging at a low temperature may prevent full charging.
• If the battery usage time becomes very short even when fully charged, the battery
has reached the end of its service life. Replace it with a new battery. Be sure to use a
replacement battery recommended by RICOH IMAGING.
• The recharge time with the provided USB cable (I-USB198) is approx. 2 hours (at 25°C
(77°F)).
Caution--------------------------------------------------------------------------------• Use of other batteries can cause explosion.
• Recycle used batteries in a recycle box at your local electronics store or
supermarket.
178
Camera Care and Storage
Caring for the Camera
• Image quality can be affected by fingerprints and other foreign matter on the lens.
Avoid touching the lens with your fingers.
• Remove dust or lint on the lens with a commercially available blower, or gently clean
the lens with a soft, dry cloth.
• Clean the camera thoroughly after using it at the beach or handling chemicals.
• In the unlikely event of malfunction, consult your nearest service center or dealer.
• The camera contains high-voltage circuits. Do not disassemble it.
• Do not expose the camera to volatile substances such as thinner, benzine, or pesticides. Failure to observe this precaution could result in damage to the camera or its
coatings.
• The monitor is easily scratched, avoid touching it with hard objects.
• Clean the monitor by wiping it with a soft cloth dampened with a small amount of any
monitor cleaner that does not contain organic solvents.
Storage
Before Cleaning
• Be sure to turn the camera off.
• Remove the battery and AC adapter from the camera.
179
7
Appendix
• Do not store the camera where it will be exposed to:
Extreme heat or humidity, large changes in temperature or humidity
Dust, dirt, sand
Severe vibration
Prolonged contact with chemicals including pesticides, or with vinyl or rubber
products
Strong magnetic fields (for example, in the vicinity of a monitor, transformer, or
magnet)
• Remove the battery if the camera is left unused for a long period of time.
Warranty Policy
All our cameras purchased through authorized bona fide photographic distribution channels
are guaranteed against defects of material or workmanship for a period of twelve months from
the date of your purchase. Service will be rendered, and defective parts will be replaced without
cost to you within that period, provided the camera does not show evidence of impact, sand
or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to
operating instructions, or modification by an unauthorized repair shop. The manufacturer or its
authorized representatives shall not be liable for any repair or alterations except those made
with its written consent and shall not be liable for damages from delay or loss of use or from
other indirect or consequential damages of any kind, whether caused by defective material or
workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its
representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs
by non-authorized service facilities.
7
Appendix
Procedure During 12-month Warranty Period
Any camera which proves defective during the 12-month warranty period should be returned
to the dealer from whom you purchased the camera or to the manufacturer. If there are no
representatives of the manufacturer in your country, send the camera to the manufacturer, with
postage prepaid. In this case, it will take a considerable length of time before the camera can
be returned to you owing to the complicated customs procedures required. If the camera is
covered by warranty, repairs will be made and parts replaced free of charge, and the camera
will be returned to you upon completion of servicing. If the camera is not covered by warranty,
regular charges of the manufacturer or of its representatives will apply. Shipping charges are
to be borne by the owner. If your camera was purchased outside of the country where you
wish to have it serviced during the warranty period, regular handling and servicing fees may
be charged by the manufacturer’s representatives in that country. Notwithstanding this, your
camera returned to the manufacturer will be serviced free of charge according to this procedure
and warranty policy. In any case, however, shipping charges and customs clearance fees to be
borne by the sender. To prove the date of your purchase when required, please keep the receipt
or bills covering the purchase of your camera for at least a year. Before sending your camera for
servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer.
Always obtain a quotation for the service charge, and only after you accept the quoted service
charge, instruct the service station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from our distributors in some countries can
supersede this warranty policy. Therefore, we recommend that you review the
warranty card supplied with your product at the time of purchase, or contact
our distributor in your country for more information and to receive a copy of
the warranty policy.
180
For Customers in USA and Canada
Conditions of RICOH IMAGING North America Warranty
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you. This warranty gives you
specific rights and you may have other legal rights which vary from state to state. This warranty
policy does not affect the consumer’s statutory rights.
Register your product:
USA: https://us.ricoh-imaging.com/register-product/
CAN: https://www.ricoh-imaging.ca/register-your-ricoh-imaging-product/
For service-related inquiries:
USA: https://us.ricoh-imaging.com/repairs/
CAN: https://www.ricoh-imaging.ca/support/repairs/
For technical support:
USA: https://us.ricoh-imaging.com/online-support/
Tel: 1-800-234-0276
CAN: https://www.ricoh-imaging.ca/support/digital-support/
Tel: 1-800-224-6767
181
7
Appendix
1. RICOH IMAGING products originally distributed by RICOH IMAGING AMERICAS CORPORATION
and RICOH IMAGING CANADA and purchased through our authorized distribution channels,
are warranted by RICOH IMAGING AMERICAS CORPORATION and RICOH IMAGING CANADA
to the original retail purchaser for a period of one year from date of purchase against defects
in material and/or workmanship.
2. This warranty is limited to repair of defects in material and/or workmanship. These repairs will
be made at no charge to the customer. However, all charges related to shipping the product
to the service center are the responsibility of the owner. (Note: RICOH IMAGING AMERICAS
CORPORATION and RICOH IMAGING CANADA will not assume the responsibility for damages
or loss encountered in transit to the service center but will assist in processing any claims
whenever possible.)
3. This warranty does not cover finishes or batteries, nor does it cover damages resulting from
accident, misuse, abuse, dirt, water, sand, battery leakage, tampering, servicing performed or
attempted by unauthorized service agencies. This warranty is valid only in the country where
this product is purchased. Routine cleaning and normal cosmetic and mechanical wear are
not covered under the terms of this warranty. RICOH IMAGING AMERICAS CORPORATION and
RICOH IMAGING CANADA shall not be liable for any consequential or incidental damages
resulting from any breach of warranty, express or implied, applicable to this product.
4. Please be sure to keep your original or a copy of your proof of purchase receipt (bill of sale), to
obtain warranty service during the warranty period. The dated proof of purchase receipt (bill
of sale) must be provided to ensure warranty status. If the dated proof of purchase receipt (bill
of sale) is not received with the product, a repair estimate will be issued.
Pour les utilisateurs aux États-Unis et au Canada
Conditions de garantie RICOH IMAGING en Amérique du Nord
7
Appendix
1. Les produits RICOH IMAGING distribués à l’origine par RICOH IMAGING AMERICAS CORPORATION
et RICOH IMAGING CANADA et achetés par l’entremise de nos réseaux de distribution dûment
agréés sont garantis par RICOH IMAGING AMERICAS CORPORATION et RICOH IMAGING CANADA
contre tout défaut de fabrication et de main-d’œuvre pendant un an à partir de la date d’achat
initiale pour l’acheteur original.
2. Cette garantie se limite aux réparations des défauts de fabrication et de main-d’œuvre. Ces
réparations seront effectuées sans frais pour le client. Cependant, tous les frais reliés à l’envoi
du produit dans un Centre de service seront à la charge de l’utilisateur. (Nota : RICOH IMAGING
AMERICAS CORPORATION et RICOH IMAGING CANADA n’assumeront aucune responsabilité
pour les dommages ou perte pouvant survenir lors du transport, mais assistera dans le
traitement de toute réclamation dans la mesure du possible.)
3. Cette garantie ne couvre pas le fini ni les piles, et ne couvre pas non plus les dommages résultant d’un accident, d’une utilisation inappropriée ou abusive ainsi que de la poussière, eau,
écoulement des piles, modifications ou réparations réalisées ou tentées par une agence de
réparation non agréée. Cette garantie n’est valable que dans le pays où le produit a été acheté. Le nettoyage de routine et l’usure mécanique et esthétique ne sont pas couverts par cette
garantie. RICOH IMAGING AMERICAS CORPORATION et RICOH IMAGING CANADA ne peuvent
être tenues responsables des dommages accidentels, indirects et consécutifs résultant d’un
manquement à une condition de la garantie, expresse ou implicite, applicable à ce produit.
4. Conservez votre bon d’achat original (facture de vente datée) ou une , copie afin de fournir
lors d’une demande de réparation pendant la période de garantie. Votre bon d’achat doit être
fournie pour assurer l’état de la garantie. Si votre bon d’achat n’est pas reçue avec le produit,
un devis de réparation sera émis.
Certains pays, états ne permettent pas de limiter la durée d’une garantie implicite, donc les
limitations citées ci-dessus peuvent ne pas s’appliquer à vous. De même, certains pays, états
permettent pas l’exclusion ou la limitation des dommages accidentels ou consécutifs, en conséquence, les limitations peuvent ne pas s’appliquer à vous. Cette garantie vous donne des droits
spécifiques et vous pouvez avoir d’autres droits selon la juridiction en vigueur dans votre région. Cette garantie ne peut diminuer les droits juridiques du consommateur.
Renseignement relatif au service :
https://www.ricoh-imaging.ca/fr/service-et-solution/repairs/
Soutien technique :
https://www.ricoh-imaging.ca/fr/service-et-solution/soutien-technique/
182
Regulatory Compliance Statements
For Customers in USA
STATEMENT OF FCC COMPLIANCE
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance
Information
Product Name: RICOH GR IV
Model: R09010
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Responsible party: RICOH IMAGING AMERICAS CORPORATION
Address: 2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.
Phone: 800-877-0155
FCC Part 15 Subpart B Class B
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
183
7
Appendix
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Part 15 Subpart E
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is passed down through the
MAC, through the digital and analog baseband, and finally to the RF chip. Several special
packets are initiated by the MAC. These are the only ways the digital baseband portion
will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore,
the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of
either absence of information to transmit or operational failure.
Frequency tolerance (2.4 GHz band): 25 ppm
Frequency tolerance (5 GHz band): 20 ppm
RF Exposure Warning
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
7
Appendix
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted
using standard operating positions accepted by the FCC with the EUT transmitting at
the specified power level in different channels.
The FCC has granted an Equipment Authorization for this device with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information
on this device is on file with the FCC and can be found under the Display Grant section of
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
after searching on FCC ID: 2ACZS-R09010.
184
Safety Standard for Button Cell or Coin Batteries and Consumer
Products Containing Such Batteries
This product contains a non-replaceable button cell or coin battery.
Do not replace the button cell or coin battery. This can cause a fire or electric shock.
WARNING
a) Immediately dispose of used battery according to local regulations and keep it away
from children. Do NOT dispose of the battery in household trash or incinerate.
b) Even a used battery may cause severe injury or death.
c) Call a local poison control center for treatment information.
d) Battery type: ML414H IV01E
e) Nominal battery voltage: 3 V
f ) A non-rechargeable battery is not to be recharged.
g) Do not force discharge, recharge, disassemble, heat above manufacturer’s specified
temperature rating, or incinerate the battery. Doing so may result in injury due to
venting, leakage, or explosion, resulting in chemical burns.
185
7
Appendix
• INGESTION HAZARD: This product
contains a button cell or coin battery.
• DEATH or serious injury can occur if
ingested.
• A swallowed button cell or coin battery can cause Internal Chemical
Burns in as little as 2 hours.
• KEEP new and used batteries OUT
OF REACH of CHILDREN.
• Seek immediate medical attention
if a battery is suspected to be swallowed or inserted inside any part of
the body.
General Certificate of Conformity
7
Appendix
PRODUCT MODEL
MODEL: R09010
TYPE: DIGITAL CAMERA
CITATION TO EACH CPSC
PRODUCT SAFETY RULE
TO WHICH THIS PRODUCT
IS BEING CERTIFIED
16 CFR Part 1263 — Safety Standard for Button Cell
or Coin Batteries and Consumer Products Containing
Such Batteries
THE IMPORTER ISSUING
THE CERTIFICATE
RICOH IMAGING AMERICAS CORPORATION
2 Gatehall Drive Suite 204, Parsippany,
New Jersey 07054, U.S.A.
(800) 234-0276
CONTACT INFORMATION
FOR THE INDIVIDUAL
MAINTAINING RECORDS
OF TEST RESULTS
RICOH IMAGING AMERICAS CORPORATION
Yuliana Kwok
[email protected]
2 Gatehall Drive Suite 204, Parsippany,
New Jersey 07054, U.S.A.
(905) 795-5729
THE DATE AND PLACE
OF MANUFACTURE
March, 2025
Guangdong Sheng, China
THE DATE AND PLACE
WHERE THE PRODUCT
WAS TESTED
1/4/2025 to 20/6/2025
Kanagawa, Japan
LABORATORY
CONDUCTING TESTING
ON WHICH THE
CERTIFICATE DEPENDS
RICOH IMAGING COMPANY, LTD.
16-1 Shinei-cho, Tsuzuki-ku, Yokohama, Kanagawa
224-0035 Japan
186
For Customers in USA and Canada
Lithium-ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable batteries
to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free 1-877723-1297, or visit https://www.call2recycle.org/.
For Customers in Canada
Innovation, Science and Economic Development Canada (ISED)
Regulatory Compliance Notice
This Class B digital apparatus complies with Canadian ICES-003 (B).
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and
Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during
normal operation is minimized.
This device has been evaluated for and shown compliant with the ISED Specific Absorption Rate (“SAR”) limits when operated in portable exposure conditions. (Antennas are
greater than 0 mm from a person’s body.)
187
7
Appendix
Warning:
(i) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems.
(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for
devices in the band 5725–5850 MHz shall be such that the equipment still complies
with the e.i.r.p. limits as appropriate.
Pour les utilisateurs au Canada
Avis de conformité à la réglementation d’Innovation, Sciences et
Développement économique Canada (ISDE)
Cet appareil numérique de la classe B est conforme à la norme NMB-003 (B) du Canada.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1. L’appareil ne doit pas produire de brouillage ;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Mise en garde :
(i) Les dispositifs fonctionnant dans la bande de 5150 à 5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
(ii) Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis
(pour les dispositifs utilisant la bande de 5725 à 5850 MHz) doit être conforme à la
limite de la p.i.r.e. spécifiée, selon le cas.
7
Informations concernant l’exposition aux fréquences radio (RF)
Appendix
La puissance de sortie rayonnée de l’appareil sans fil est inférieure aux limites d’exposition aux radiofréquences d’Innovation, Sciences et Développement économique Canada (ISDE). L’Appareil sans fil doit être utilisé de telle manière que le potentiel de contact
humain pendant le fonctionnement normal soit minimisé.
Cet appareil a été évalué et démontré conforme aux limites de débit d’absorption spécifique (« SAR ») ISDE lorsqu’il est utilisé dans des conditions d’exposition portables. (Les
antennes sont à plus de 0 mm du corps d’une personne.)
188
For Customers in Countries that Require the CE Marking
This product complies with the essential requirements and provisions.
RE Directive 2014/53/EU
The EU Declaration of Conformity is available by accessing the URL:
https://www.ricoh-imaging.co.jp/english/support/
declaration_of_conformity.html
and selecting the product applicable.
Operating frequency band: 2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
Maximum radio-frequency power: 2400 to 2483.5 MHz: 12.80 dBm EIRP
5150 to 5250 MHz: 11.20 dBm EIRP
5725 to 5850 MHz: 12.73 dBm EIRP
The minimum power required by the radio equipment to charge: 2.5 W
The maximum power required by the radio equipment to achieve maximum
charging speed: 10 W
2.5 – 10
W
Importer (CE marking): RICOH IMAGING EUROPE S.A.S.
7-9, avenue Robert Schuman, 94150 Rungis, France
7
Manufacturer:
Appendix
RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555 Japan
189
Battery Regulation (EU) 2023/1542
This product complies with the essential requirements and provisions.
Li-ion rechargeable battery
DB-120
Importer (CE marking): RICOH IMAGING EUROPE S.A.S.
7-9, avenue Robert Schuman, 94150 Rungis, France
https://ricoh-imaging.eu/
Manufacturer:
RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555 Japan
https://www.ricoh-imaging.co.jp/english/
Lithium secondary battery
ML414H IV01E
Importer (CE marking): RICOH IMAGING EUROPE S.A.S.
7-9, avenue Robert Schuman, 94150 Rungis, France
https://ricoh-imaging.eu/
Manufacturer:
7
Appendix
Seiko Instruments Inc.
8, Nakase 1-chome, Mihama-ku, Chiba-shi, Chiba 261-8507 Japan
https://krs.bz/sii/m/battery_inq_en
190
Regarding Wireless LAN
AT
EE
IE
NL
ES
BE
FI
IT
PL
SE
CH
HR
BG
FR
LV
PT
UK(NI)
MK
CY
DE
LT
RO
IS
TR
CZ
EL
LU
SK
LI
ME
DK
HU
MT
SI
NO
RS
• Do not use the 5 GHz band (W52) of wireless LAN outdoors in the countries listed
above. The outdoor use of the W52 is prohibited by law in these countries. Use the 2.4
GHz or 5.8 GHz band for outdoors.
• The frequency range used by this product is limited to 5150 to 5250 MHz (W52) or
5725 to 5850 MHz (W58) in the 5 GHz band.
Regarding Batteries
191
7
Appendix
• Replacement of a battery with an incorrect type can defeat a safeguard (for example,
in the case of some lithium battery types).
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can
result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the
leakage of flammable liquid or gas.
For Customers in Countries that Require the UKCA Marking
This product complies with the essential requirements and provisions.
Radio Equipment Regulations 2017
The UK Declaration of Conformity is available by accessing the URL:
https://www.ricoh-imaging.co.jp/english/support/
declaration_of_conformity.html
and selecting the product applicable.
Operating frequency band: 2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
Maximum radio-frequency power: 2400 to 2483.5 MHz: 12.80 dBm EIRP
5150 to 5250 MHz: 11.20 dBm EIRP
5725 to 5850 MHz: 12.73 dBm EIRP
Manufacturer:
RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555 Japan
7
Appendix
192
UK2-25-04-A
PSTI Statement of Compliance
This statement of compliance has been prepared by RICOH IMAGING COMPANY, LTD.,
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555 Japan (the ‘Manufacturer’) pursuant to
Section 9 (2) of the Product Security and Telecommunications Infrastructure Act 2022 in
respect of the following product:
Product Type: DIGITAL CAMERA
Product Model: R09010
End of Security Support Date: 30/11/2026
For details, refer to the webpages shown below.
https://www.ricoh-imaging.co.jp/english/about/security/products/support/
7
Security requirements for manufacturers set out in SCHEDULE 2 of the Product Security
and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.
Applicable Standards: ETSI EN 303 645 V.2.1.1 (2020-06)
ISO/IEC 29147:2018 (2018-10)
Authorized by:
Kazunobu Saiki
Title of Authority: General Manager, Camera Business Division
RICOH IMAGING COMPANY, LTD.
Place and Date of Issue: Tokyo, Japan
30/6/2025 (dd/mm/yyyy)
193
Appendix
In the Manufacturer’s opinion, the Manufacturer has complied with the following applicable security requirements:
For Customers in Europe
Information for Users on Collection and Disposal of Old Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipment and batteries
should not be mixed with general household waste.
Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment,
recovery and recycling of these products.
By disposing of these products correctly you will help ensure that the
waste undergoes the necessary treatment, recovery and recycling and
thus prevent potential negative effects on the environment and human
health which could otherwise arise due to inappropriate waste handling.
7
If a chemical symbol is added beneath the symbol shown above, in accordance with
the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium,
Pb = Lead) is present in the battery at a concentration above an applicable threshold
specified in the Battery Directive.
Appendix
For more information about collection and recycling of used products, please contact
your local authorities, your waste disposal service or the point of sale where you purchased the products.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of
disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to
the dealer, even when you don’t purchase a new product. Further collection facilities are
listed on the home page of www.swico.ch or www.sens.ch.
194
For Customers in Thai
เครื่่�องโทรคมนาคมและอุุปกรณ์์นี้้� มีีความสอดคล้้องตามมาตรฐานหรืือข้้อกำำ�หนดทางเทคนิิค
ของ กสทช
7
EPR No.: 7252955672223764882
195
Appendix
For Customers in India
Battery Waste Management Rules
Index
Numerics
4-way Controller........................................... 63
A
AA Filter Simulator....................................... 93
AC adapter...................................................... 42
ADJ. mode....................................................... 24
ADJ Mode Setting..................................... 134
AdobeRGB....................................................... 91
AE Lock............................................................. 54
AE Metering.................................................... 67
AF Assist Light............................................... 61
AF point........................................................... 63
Animation Setting........................................ 51
Aperture Priority AE..................................... 53
Aperture value............................................... 52
Aspect Ratio................................................... 91
Auto-area AF (Focus)................................... 60
Auto bracketing............................................ 82
Auto EV Compensation.............................. 54
Auto Image Rotation................................ 101
Auto Image Transfer................................. 128
Auto Power Off........................................... 146
Auto Resize.................................................. 128
Auto SR Off..................................................... 98
Auto White Balance (White Balance)..... 75
AV device...................................................... 102
Av mode.......................................................... 53
B
Base Parameter Adj................................... 120
Battery....................................................... 40, 42
Battery level.................................................... 20
Bleach Bypass (Image Control)................ 95
Bluetooth®............................................ 45, 125
Box.................................................................. 131
Bracketing....................................................... 82
Bulb................................................................... 56
Bulb timer........................................................ 56
Button............................................................... 16
C
Camera name change.............................. 124
Card................................................................... 40
Care................................................................ 179
Center-weighted (AE Metering).............. 67
Certification Marks......................................... 3
Changing display.......................................... 20
Charging the battery................................... 42
Cinema (Image Control)............................. 94
Cloudy (White Balance).............................. 75
Color Moiré Correction............................ 119
Color Space..................................................... 91
Color Temperature (White Balance)....... 79
Communication device.................... 45, 124
Connection to a computer..................... 123
Continuous AF (Focus)............................... 60
Continuous Shooting.................................. 81
Conversion lens.......................................... 155
Copyright Information............................. 153
Correcting a range of tones...................... 97
Count Down................................................ 144
Create New Folder..................................... 148
Crop............................................................ 91, 92
Cropping....................................................... 115
Cross Processing (Image Control)........... 95
CTE (White Balance).................................... 76
Customization............................................ 134
Customize Settings menus....................... 34
Cut (Movie).................................................. 121
D
Date Adjustment.......................................... 45
Daylight (White Balance)........................... 75
Delete............................................................ 103
Depth of field................................................. 55
Dial..................................................................... 16
Direct keys....................................................... 22
DisplayPort™............................................... 102
Divide (Movie)............................................ 121
DNG................................................................... 91
D-Range Correction..................................... 97
Drive Mode..................................................... 80
Dust Removal.............................................. 160
E
Editing images............................................ 111
Electronic Level.......................................... 141
Electronic Level Design........................... 143
Electronic Level Type................................ 143
End Screen...................................................... 44
196
Exif.................................................................. 153
Exposure compensation............................ 53
Exposure Mode................................... 52, 133
Exposure Setting....................................... 134
F
Face/Eye Detection...................................... 62
File Format...................................................... 91
File Name...................................................... 151
File Transfer.................................................. 109
Firmware update....................................... 124
Flash.................................................................. 70
Flash Mode..................................................... 71
Flash On+Red-eye (Flash).......................... 71
Flash On (Flash)............................................. 71
Flash Output................................................... 71
Flicker Reduction....................................... 143
Fluorescent (White Balance)..................... 75
Fn button......................................................... 23
Fn Button Setting...................................... 136
Focus.......................................................... 49, 60
Focus bar......................................................... 64
Focus frame.................................................... 49
Focus Limiter.................................................. 62
Focus Magnification.................................... 51
Focus Peaking................................................ 61
Focus Settings............................................ 138
Folder display.............................................. 100
Folder Name................................................ 149
Format.............................................................. 46
Formatting the memory............................ 46
Framerate........................................................ 92
Full Press Snap............................................... 66
Highlight-weighted (AE Metering)........ 67
Histogram.................................................... 141
Horizon Correction...................................... 98
I
Image Capture Settings............................. 91
Image Control................................................ 94
Image Copy................................................. 107
Image Rotation........................................... 101
Image Transfer while Off......................... 128
Infinity (Focus)............................................... 60
Initial settings................................................ 44
Instant Review..................................... 48, 142
Internal Memory........................................... 41
Interval Composite...................................... 87
Interval Shooting.......................................... 85
ISO sensitivity................................................ 69
ISO Setting...................................................... 69
J
JPEG Recorded Pixels.................................. 91
K
Keep AE Lock............................................... 138
L
Language setting......................................... 45
LCD Auto Dim............................................. 147
LCD Setting.................................................. 143
Lens adapter................................................ 155
Levels Adjustment.................................... 116
Link AE and AF Point................................... 68
Long exposure............................................... 56
G
M
Grid Guide.................................................... 141
Grid Style...................................................... 143
GR WORLD............................................ 45, 124
Guide Display....................................... 23, 138
Macro................................................................ 65
Magnifying images...................................... 50
Magnifying Live View images.................. 49
Manual Exposure.......................................... 53
Manual focus.................................................. 64
Manual White Balance
(White Balance)......................................... 78
Memory......................................................... 140
Memory card.................................................. 40
Menu................................................................. 25
MF...................................................................... 64
MF Auto Magnification............................... 64
H
Hard Monotone (Image Control)............ 94
HDR Tone (Image Control)........................ 95
Hi-Contrast B&W (Image Control).......... 94
High-ISO Noise Reduction........................ 73
Highlight Alert............................................ 141
Highlight Correction................................... 97
197
microSD memory card............................... 40
M mode............................................................ 53
Moiré reduction............................................ 93
Monitor............................................................ 18
Monotone (Image Control)....................... 94
Movie................................................................ 57
Movie Capture Settings.............................. 92
Movie Edit.................................................... 121
Movie Settings menus................................ 31
Movie SR.......................................................... 98
Multi-exposure.............................................. 83
Multi-image display.................................. 100
Multi-segment (AE Metering).................. 67
N
ND Filter........................................................... 93
Negative Film (Image Control)................ 94
Noise Reduction........................................... 73
O
One Push AE in M Mode.................. 56, 138
Operating environment.......................... 175
Outdoor View Setting.............................. 144
P
Package contents......................................... 13
Pairing.................................................... 45, 126
Peripheral Illumin. Corr............................... 96
Pinpoint AF (Focus)...................................... 60
Pixel Mapping............................................. 160
Playback.................................................... 50, 99
Playback function selection screen....... 99
Playback Info. Display.............................. 141
Playback Order Options.......................... 101
Playback Settings menus........................... 32
P mode...................................................... 48, 53
Positive Film (Image Control)................... 94
Power................................................................ 44
Power Button Lamp.................................. 144
Preview............................................................. 55
Processing images.................................... 111
Program AE.............................................. 48, 53
Program Auto Ex........................................... 54
Program Line.................................................. 55
Protect........................................................... 105
Q
Quick Zoom................................................. 142
R
RAW................................................................... 91
RAW Development................................... 111
Reducing blurring of images................... 98
Remote shooting....................................... 124
Reset.................................................................. 26
Reset Numbering...................................... 152
Reset Settings................................................ 26
Reset to Factory Default............................. 26
Resize............................................................. 114
Retro (Image Control)................................. 95
Ring cap........................................................ 155
S
Saving power.............................................. 146
Select AF (Focus)........................................... 60
Self-timer......................................................... 89
Sensitivity........................................................ 69
Sequential Numbering............................ 152
Setting box.................................................. 131
Setup menus.................................................. 37
Shade (White Balance)............................... 75
Shadow Correction...................................... 97
Shake Reduction........................................... 98
Sharing.......................................................... 123
Shooting close-ups...................................... 65
Shooting date display.............................. 100
Shooting Info. Display............................. 141
Shooting Memory Setting........................ 90
Shutter Btn. Confirmation...................... 139
Shutter Button Setting............................ 139
Shutter Priority AE........................................ 53
Shutter speed................................................ 52
Single image display................................... 50
Sleep Mode.................................................. 147
Slow Shutter Speed NR.............................. 73
Slow-speed Sync (Flash)............................. 71
Slow Sync+Red-eye (Flash)....................... 71
Smartphone Link....................................... 128
Smartphone Linkage.................................. 45
Snap Distance Priority AE.......................... 53
Snap (Focus)................................................... 60
Snap Focus Distance................................... 60
Sn mode........................................................... 53
198
Soft Monotone (Image Control).............. 94
Sound Effects.............................................. 145
Sound Recording.......................................... 92
Specifications.............................................. 166
Spot (AE Metering)....................................... 67
sRGB.................................................................. 91
Status lamp..................................................... 49
Still Image Settings menus....................... 28
Storage.......................................................... 179
Storage capacity................................. 43, 173
Store Cursor Position................................... 26
Store Location Info.................................... 128
T
Time................................................................... 56
Time synchronization.............................. 124
Touch AF.......................................................... 55
Touch screen.................................................. 21
Tracking AF (Focus)...................................... 60
Tungsten (White Balance)......................... 76
TV.................................................................... 102
Tv mode........................................................... 53
U
USB cable............................................... 42, 123
User Mode.................................................... 129
V
Vivid (Image Control).................................. 94
Volume.......................................................... 145
Volume label.................................................. 47
W
Warranty policy.......................................... 180
WB Adjustment.......................................... 118
White Balance................................................ 75
Wireless Communication........................ 126
Z
Zone Select AF (Focus)............................... 60
199
RICOH IMAGING COMPANY, LTD.
16-1, Shinei-cho, Tsuzuki-ku, Yokohama, Kanagawa
224-0035 Japan
(https://www.ricoh-imaging.co.jp)
RICOH IMAGING EUROPE
S.A.S.
7-9, avenue Robert Schuman, 94150 Rungis, France
(https://www.ricoh-imaging.eu)
RICOH IMAGING
2 Gatehall Drive Suite 204, Parsippany, New Jersey
AMERICAS CORPORATION 07054, U.S.A.
(https://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA
INC.
5560 Explorer Drive Suite 400, Mississauga, Ontario,
L4W 5M3, Canada
(https://www.ricoh-imaging.ca)
RICOH IMAGING CHINA
CO., LTD.
Room A 23F Lansheng Building, 2-8 Huaihaizhong
Road, Huangpu District, Shanghai, 200021, China
(https://www.ricoh-imaging.com.cn/china/)
https://www.ricoh-imaging.co.jp/english/
This contact information may change without
notice. Please check the latest information on our
websites.
RICOH IMAGING COMPANY, LTD.
June, 2025
EN
EN USA GB GB AE AE
Printed in China
78560 Z040
*4QDAZ040*
">