Fisher & Paykel RS60 Installation Manual/User Manual

SLIDE-IN WINE CABINET
RS60 model
INSTALLATION GUIDE / USER GUIDE
UK IE
CONTENTS
Introduction
5
Safety and warnings
6
Installation instructions
9
Operating instructions – Internal control panel
15
Operating instructions – Special functions
16
Interior and exterior features
17
Storing your wine
18
Loading your wine bottles
19
Cleaning care – Exterior
20
Cleaning care – Interior
21
User warnings and sounds
22
Troubleshooting
23
Manufacturer’s Warranty
25
Customer Care
27
European Directive 2012/19/EU on
Waste Electrical and Electronic Equipment (WEEE)
28
Registration
To register your product visit our website: fisherpaykel.com/register
3
INTRODUCTION
Thank you for purchasing a Fisher & Paykel Wine Cabinet to store your treasured
wine, you’ve made a great choice.
Having purchased our dual-zone cabinet you can rest assured that your red and
white wines are well cared for, over short term and long term periods.
Wine generally matures at a steady temperature between 11°C to 13°C, and for ready
to drink wines they are best served at their ideal drinking temperatures (see ‘Storing
your wine’ section). Temperature control is critical for the maturation of wines, as
significant daily or weekly temperature fluctuations can denature wines. If storage
temperatures are excessively high this can reduce the wine’s aromatic potential and
can speed up maturation. This can cause some wines to take on a ‘spoiled fruit’
flavouring. If storage temperatures are excessively low, this can have the opposite
effect and stunt a wine’s natural maturation process. This can prevent a wine’s flavour
from developing to full potential.
Optimum humidity levels are also important for the storage of cork-enclosed wines,
especially for long term storage. Dry surroundings can lead to dried out corks
encouraging wine evaporation, as well as oxygen permeation leading to oxidised
wine. As for extremely humid conditions, there is a potential of damaging wine labels
and the growth of mould on bottles.
Light is known to be damaging to wines, particularly UV light as it creates hydrogen
sulphide compounds in wine affecting the tannins and colour. Therefore our
Wine Cabinets are designed to eliminate this threat by incorporating a double
UV-tempered glass door, dark interiors and dimmed LED lighting.
Other golden rules of excellent wine storage that your Wine Cabinet offers are
frequent air circulation, condensation eliminator and minimal vibrations with the low
noise compressor.
Top zone carbon filter
Double UV-tempered glass door
Top zone roller shelf
Internal control panel
Bottom zone carbon filter
Bottom zone roller shelves
Safety latch
RS60 model
Safety lock
5
SAFETY AND WARNINGS
!
WARNING!
Electric Shock Hazard
Failure to do so can result in death, electric
shock, fire or injury to persons.
• Read and follow the safety and warnings
outlined in this user guide before operating this
appliance.
Risk of fire/flammable material
R600a
• This refrigerator contains flammable refrigerant
isobutane (R600a).
READ AND SAVE THIS GUIDE
WARNING!
Read entire manual. Failure to follow all guides and rules could cause personal injury or
property damage. When using this appliance, always exercise basic safety precautions
inlcuding the following:
General use
z
z
z
z
z
z
z
z
z
z
z
z
z
6
This product has been designed for use in a normal domestic (residential) environment.
Children aged 3 to 8 years may load and unload this appliance under supervision.
Children should be supervised to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be undertaken by children without supervision.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
The manufacturer’s installation instructions for product and cabinetry ventilation must
be followed when installing the appliance.
Keep ventilation openings, in the appliance enclosure or the built-in structure, clear
of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
In case of damage to the refrigerant circuit, ventilate the area by opening all windows.
Do not operate electrical equipment or any other equipment that may produce arcs,
sparks or flames in the area. Contact your Fisher & Paykel trained and supported
service technician immediately to arrange for the appliance to be repaired.
This refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 38 °C. The product performance may be compromised when operating
outside of this temperature range.
This refrigerating appliance is not intended to be used as a built-in appliance.
SAFETY AND WARNINGS
Food safety
z
z
z
This appliance is intended to be used exclusively for the storage of wine.
Do not store food and milk products in the Wine Cabinet. The interior temperature may
not be cool enough to prevent spoilage in food, and the expiry dates stated on the
food packaging may be invalid.
This refrigerating appliance is not suitable for freezing foodstuffs.
Electrical
z
z
z
z
z
z
z
z
z
z
This appliance must be installed in accordance with the installation instructions before
use.
Always grip the plug firmly and pull straight out from the outlet.
Do not plug in any other appliance at the same power point as your Wine Cabinet.
Repair or replace immediately all electric service cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion along its length,
or at either the plug or appliance end.
If the power supply cord is damaged, it must only be replaced by your Fisher & Paykel
trained and supported service technician.
When moving your appliance, be careful not to roll over or damage the power cord.
Do not use electrical appliances inside the Wine Cabinet.
Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
When positioning the appliance, ensure the power cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of
the appliance.
Servicing
z
z
Your Wine Cabinet is designed to operate without the need for regular service
checks. However, if your Wine Cabinet is malfunctioning, have it attended to by your
Fisher & Paykel trained and supported service technician as soon as possible.
The LED light cannot be serviced by the user. Contact your Fisher & Paykel Dealer or
Fisher & Paykel trained and supported service technician.
Cleaning
z
Many commercially available cleaning products contain solvents which may attack
plastic components of your Wine Cabinet and cause them to crack. Please refer to the
‘Cleaning care’ section of this user guide for further advice.
Disposal and recycling
z
Extreme care must be taken when disposing your old appliance to avoid hazards:
The flammable refrigerant gas must be safely removed.
z
The thermal insulation foam contained in this appliance is produced by flammable
blowing gases, any exposed foam may be highly flammable and must be carefully
treated during disposal.
z
WARNING: Risk of child entrapment. Before you throw away your old refrigerator or
freezer, the doors and panels should be removed and the racks left in place so that
children may not easily climb inside.
z
Consult your local energy authority or local codes as to the best way to dispose of
your old appliance.
z
7
SAFETY AND WARNINGS
Storing wine
z
z
DO NOT store explosive substances such as aerosol cans with a flammable propellant in
this appliance.
Never store volatile or flammable materials in your Wine Cabinet as they may explode.
Light source information – EU/UK only
z
8
This product contains a light source of energy efficiency class F. The light source used
in this appliance is not suitable for room illumination.
INSTALLATION INSTRUCTIONS
Power failure
z
z
z
In the event of a power interruption, the Wine Cabinet will automatically save the
current temperature settings. When power is recovered, the Wine Cabinet will revert to
the current temperature settings only.
Most power failures are corrected within a short period of time. 1 – 2 hours loss of
power will not affect the Wine Cabinet’s temperatures.
To avoid sudden change of temperature while the power is off, you should avoid
opening the door. For longer periods of power failure, do take steps to protect your
wine.
9
INSTALLATION INSTRUCTIONS
Please follow the installation steps below to ensure your appliance operates correctly.
Power
●
●
●
●
●
●
The appliance must be installed so the plug is accessible.
To ensure that the appliance is not accidentally switched off, connect your Wine Cabinet
to its own power point. Do not plug in any other appliance at this power point.
For power requirements, please refer to the serial plate located on the rear of the
cabinet.
It is essential that the appliance is properly grounded (earthed).
Connect the appliance to the electrical supply (220 V – 240 V 50Hz) with the fitted
plug and lead.
Connections to the mains supply should be in accordance with local regulations.
Location
●
●
●
●
Your Wine Cabinet should not be located in direct sunlight or next to any heat
generating appliance such as a cooktop, oven or dishwasher.
The appliance should not be located in garages or on carpeted floors.
This refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 38 °C.
For optimum performance, it is recommended to control the ambient temperature
betwen 16°C and 25°C.
Ventilation and installation
To ensure adequate ventilation for your Wine Cabinet, see ‘Product and cabinetry
dimensions’.
10
INSTALLATION INSTRUCTIONS
Product installation
●
●
●
Your Wine Cabinet will arrive with the front feet raised to make moving the product into
its final location a simple task.
Avoid moving the product in a sideways direction as this may damage the floor
covering/surface.
Move the Wine Cabinet into its final position making sure there are correct clearances
between the product and surrounding cabinetry.
Levelling your Wine Cabinet
●
●
●
●
It is important that all four corners of
the Wine Cabinet base are supported
firmly on the floor to eliminate any
cabinet movement.
Installing the appliance on a soft or
uneven/unlevelled floor may result
in twisting of the cabinet and poor
sealing of the door.
This Wine Cabinet has four adjustable
feet, which can be used to level the
appliance.
The front levelling foot on the hinge
side should take majority of the
cabinet’s weight and be stable, ie the
cabinet should not rock or wobble.
Counter-clockwise
to raise feet
Clockwise to
lower feet
Before placing wine in your Wine Cabinet
●
●
●
Remove all internal packaging.
Clean the inside of the appliance to remove manufacturing and transportation dust.
Please refer to the ‘Cleaning care’ section of this user guide for further advice.
Allow the Wine Cabinet to run empty for 1 – 2 hours, this allows the appliance to
acclimatise and remove any residual odours before making temperature adjustments.
Energy efficiency
●
●
●
For the most energy efficient use of your appliance:
Ensure your Wine Cabinet has adequate ventilation as recommended in the installation
instructions.
Avoid overcrowding shelves, as this reduces airflow.
Keep door openings to a minimum.
11
INSTALLATION INSTRUCTIONS
Product and cabinetry dimensions
P
D
A
D
A
D
B
K
C
O
K
F
O
F
Q
Q
CO
Q
M G
M
K
O
O
H
J
R
R
O
J
R
Flush with Wine Cabinet door
– 90° door rotation
K
M
O
J
R
12
N
Power plug to
power wall socket
S
K
M
O
I
I
K
O
O
H
G
K
L
H
O
C
Flush with Wine Cabinet door
– full door rotation
G
L E
L
K
K
A
B
O
O
F
E
P
C
B
Flush with Wine Cabinet chassis
– full door rotation
E
P
O
J
INSTALLATION INSTRUCTIONS
RS60
PRODUCT DIMENSIONS
mm
A Overall height of product
830
Overall width of product
595
B
C Overall depth of product (excludes handle, includes back cover)
580
CABINETRY DIMENSIONS (Including minimum air clearances)
mm
D Inside height of cavity
835
Flush with Wine Cabinet chassis – full door rotation
E Inside width
600
F Inside depth
565
Flush with Wine Cabinet door – full door rotation
G Inside width
600
H Inside depth flush to flat door (when not plugged at rear of product)
600
Flush with Wine Cabinet door – 90° door rotation
(for full shelf access, the door needs to be open past 90°)
I Inside width
688
J Inside depth flush to flat door
600
MINIMUM CLEARANCES
mm
K Side clearance
2.5
L Side clearance – hinge side flush with chassis – full rotation
2.5
M Side clearance – hinge side flush with door – full rotation
2.5
Side clearance – hinge side flush with door – 90° rotation
90.5
N
O Rear clearance (includes back cover)
20
P Top clearance – above Wine Cabinet
5
Q Door clearance – hinge side flush with chassis – full rotation
155
R Door clearance – hinge side flush with door – full rotation
155
MINIMUM POWER PLUG DIMENSIONS
mm
S Power plug depth
30
13
INSTALLATION INSTRUCTIONS
If your Wine Cabinet is turned off for any reason, wait 10 minutes before turning it back
on. This will allow the refrigeration systems pressures to equalise before restarting.
Moving your appliance
●
●
●
●
●
●
Turn off the appliance and unplug from the power point. Remove all wine bottles.
Turn the adjustable feet counter-clockwise to lower the product, making sure the feet
are wound up into the product.
Ease the appliance out of its position. Tape the power cord to the back of the Wine
Cabinet, tape the shelves in place and tape the door closed.
Always move the appliance vertically. Do not transport the product lying down, this
potentially damages the sealed cooling system.
Relocate and install. If the appliance has been left on its side for any length of time,
leave it standing upright as long as possible (at least a few hours) before turning it on.
If the product has been transported upright then it can be switched on after 10 minutes.
Storing your Wine Cabinet
●
●
When storing your cleaned appliance, leave the door open. This allows air to circulate
and prevents the build-up of bacteria and moulds.
Before using again, clean well using liquid dishwashing detergent dissolved in warm
water. Rinse with clean water and dry with a lint-free cloth.
Holiday time
We recommend you leave your Wine Cabinet operating while you are on holiday.
14
OPERATING INSTRUCTIONS – INTERNAL CONTROL PANEL
The control panel enables you to view and modify all the features and options on your
Wine Cabinet.
Temperature control
●
●
●
●
●
When the Wine Cabinet is turned on for the first time, the control panel will display the
actual temperature of the cabinet.
The system will automatically cool both zones to their default temperature setting of
12°C (ideal for long term storage). This will take between 1 – 2 hours.
The temperature zones are independently controlled and do not change with the
temperature or humidity of the surrounding; whether summer or winter.
The Wine Cabinet can be set to any temperature between 5°C and 20°C in each zone to
accommodate your wine storage requirements.
If you wish to alter the temperature of either zone, this can be easily done by using the
internal control panel.
Internal control panel
Adjusting the temperature of each zone
1 Press and hold the ‘Temp Zone’
button for 3 seconds. The zone temperature blinking
on the display will indicate whether the upper or bottom zone is selected.
2 To change zones press the ‘Temp Zone’ button once.
or
buttons. One press on either
3 The temperature may be altered by pressing the
of these buttons will increase or reduce the temperature by one °C or °F.
When the desired temperature is displayed, wait 5 seconds, the blinking will stop and
the temperature will be set.
icon for
4 To switch between temperature units of °C and °F, press and hold the ‘Light’
3 seconds.
15
OPERATING INSTRUCTIONS – SPECIAL FUNCTIONS
Special functions
LED lighting
When the Wine Cabinet door is open the light automatically illuminates both zones.
When the door is closed the light will automatically turn off. For maximum energy
savings, it is recommended to leave the light off when not viewing your collection.
●
●
To keep the light illuminated at all times (on door opening and closing):
Press the ‘Light’
button once.
To deactivate the light from illuminating when not viewing your collection, press the
‘Light’
button once.
Power
This model is equipped with Standby mode and may be activated when the cabinet is
not in use. Before activating this mode ensure all wine bottles are removed.
●
●
To activate press the ‘Power’
button once. The internal control panel and LED lights
will no longer illuminate.
To deactivate Standby mode press the ‘Power’
button once. The internal control
panel and LED lights will illuminate, and revert to the current temperature settings only.
Door alarm
A continuous alarm will sound if the cabinet door has been left open for longer than
60 seconds. The alarm will stop only when the door is closed.
●
●
For times when you require the door to be opened longer than normal eg rotating your
wine bottles or loading more wine, the door alarm can be temporarily muted.
To mute the door alarm, press the ‘Temp Zone’ button once. When the cabinet door is
closed, alarm mute will deactivate and the door alarm will revert to normal.
IMPORTANT!
When the cabinet door is left open for long periods of time wine quality may be
compromised.
16
INTERIOR AND EXTERIOR FEATURES
Interior features
Shelving
The oak shelves have been designed to allow for even air distribution around your wine
bottles. Easy access is possible with telescopic runners.
This model has three roller shelves and two fixed shelves.
Activated carbon filters
Air quality is critical for preserving wine. The
activated carbon filters help to remove stale,
unwanted odours and replenish with fresh air.
●
●
●
●
The filters are fitted to the rear wall on the
right-hand side of the upper and bottom zone.
We recommend that you replace your activated
carbon filters once every five years. Replacement
filters are available from your Fisher & Paykel trained
and supported service technician.
A
B
To remove the filter hold by the handle, and turn
counter-clockwise (refer to A) until fully loosened.
Pull towards you to remove (refer to B).
To replace the filter hold by the handle, insert and
turn clockwise to fully secure.
Exterior features
Door lock
The Wine Cabinet is equipped
with a door lock located at the
bottom of the cabinet door.
●
●
To lock the cabinet, insert the key
and turn 90° counter-clockwise.
To unlock the cabinet, insert the
key and turn 90° clockwise
90° counter-clockwise
to lock
90° clockwise
to unlock
17
STORING YOUR WINE
Short-term storage/serving
●
●
●
This Wine Cabinet is perfect for short-term storage such as entertaining.
Red wines are best served at warmer temperatures and white wines are best served at
cooler temperatures.
The ideal serving temperature of your wine is crucial for your taste and enjoyment.
The following are recommended serving temperatures for different wines.
SPARKLING WINES AND SWEET WHITE WINES
Non-vintage Champagne and Sparkling Wine
6°C
Vintage Champagne and Sparkling Wine, Riesling and Gewürztraminer
8°C
DRY WHITE WINES
Sauvignon Blanc, Chenin Blanc, Bordeaux Blanc
Chardonnay and White Burgundy, Rosé
9°C
10 – 12°C
LIGHT TO MEDIUM-BODIED RED WINES
Young Boredaux, Young Cabernet, Pinot Noir, Merlot
14 – 16°C
FULL-BODIED RED WINES
Cabernet Sauvignon, Red Burgundy
17°C
Shiraz, Zinfandel, Vintage Port
18°C
Long-term storage
●
●
This Wine Cabinet is also perfect for long-term storage/cellaring of wines.
The ideal temperature for long-term storage of red and white wines is between
11°C to 13°C.
Storing red and white wine
●
●
●
18
When storing a combination of red and white wines, we recommend storing same
case wines together. For example red wine in the bottom zone and white wine in the
upper zone.
Depending on the number of wine bottles and functions selected, it may take
24 hours for the Wine Cabinet temperatures to stabilise.
Not all wines stored will improve/mature over time. Some wines are best consumed at
an early stage, while others have remarkable ageing capabilities. Check with your wine
merchant for more information.
LOADING YOUR WINE BOTTLES
When loading your Wine Cabinet please keep in mind our loading capacities are based
on standard 750 ml Bordeaux bottles.
DOs
●
●
●
●
Before loading wine into the cabinet
confirm that all shelves are secured
and stable.
Roller shelves are designed for holding
6 wine bottles only.
Fixed shelves are designed for holding
only two tiers of wine bottles.
When storing a combination of red and
white wines, we recommend storing
same case wines together. For example
red wine in the bottom zone and white
wine in the upper zone.
DON’Ts
●
●
Do not load more than the
recommended number of wine bottles
on roller shelves and fixed shelves.
Do not remove any roller shelves to
allow the shelf below to hold more
than the recommended number of
wine bottles.
Upper zone roller shelf
This shelf is designed to hold
6 wine bottles only.
Upper zone fixed shelf
This shelf is designed to hold
9 wine bottles only.
Bottom zone roller shelf
This shelf is designed to hold
6 wine bottles only.
Bottom zone fixed shelf
This shelf is designed to hold
11 wine bottles only.
19
CLEANING CARE – EXTERIOR
Stainless steel exterior door
●
●
●
Use only liquid dishwashing detergent dissolved in warm water and a soft lint-free cloth
to clean the exterior door surface.
Rinse with clean water and dry with a clean, lint-free cloth.
The use of any abrasive or stainless steel cleaners and solvents will damage the door
surface.
Other exterior surfaces
●
●
Clean all other exterior surfaces with liquid dishwashing detergent dissolved in warm
water and a soft lint-free cloth.
Rinse with clean water and dry with a clean, lint-free cloth
Door gasket
●
●
●
It is recommended to clean the magnetic door gasket every three months with an old
toothbrush, and liquid dishwashing detergent dissolved in warm water.
Gasket must be kept clean and pliable to assure a proper seal.
Petroleum jelly applied lightly on the hinge side of the gasket will keep the gasket
pliable and assure a good seal.
IMPORTANT!
●
●
20
Many commercially available cleaning products contain solvents which may attack
plastic components of your Wine Cabinet and cause them to crack.
Avoid using anti-bacterial cleaning products on the interior or exterior of the Wine
Cabinet, as they may cause rusting of metal components and cracking of plastic
components.
CLEANING CARE – INTERIOR
Interior
●
●
●
For ease of cleaning, empty the Wine Cabinet first and remove all shelves.
Wipe interior surfaces using only liquid dishwashing detergent dissolved in warm water
and a soft lint-free cloth. Rinse with clean water and dry with a clean, lint-free cloth.
Do not use harsh chemicals, abrasives, ammonia, chlorine, bleach, concentrated
detergents, solvents or abrasive scouring pads on any part of your Wine Cabinet.
SOME of these chemicals may dissolve, damage and/or discolour the interior of your
Wine Cabinet.
Roller shelves
●
●
●
When cleaning use a dry clean, lint-free cloth to wipe over surfaces. Do not use warm
water or any cleaners as this will damage the shelves’ oak characteristics and cause
them to warp and stain.
If the shelves are lightly stained by spilt wine or water allow the surface to dry, then
using 200 grade sandpaper gently sand over the stain until removed.
If shelves are heavily stained, over time the colour of the shelf will darken and warp,
and may eventually require replacing. Replacement shelves are available from your
Fisher & Paykel trained and supported service technician.
Remove roller shelves
1 Pull the shelf towards you extending
the telescopic runners, making sure
the shelf is empty (refer to A).
2 Hold the front and back edge of the
shelf firmly and lift vertically to unclip
from securing hooks (refer to B).
3 Pull the shelf towards you to remove.
4 Push both telescopic runners back
into the Wine Cabinet.
B
A
Repositioning roller shelves
1 Push both telescopic runners back into the Wine Cabinet.
2 Align the shelf on top of the securing hooks and push the shelf down until you feel it clip.
3 Ensure the shelf is securely clipped onto the telescopic runners before use.
IMPORTANT!
Telescopic runners are pre-lubricated, and will not need to be re-lubricated during
their life. Do not attempt to clean the grease from the runners, as this will affect their
ability to function. Do not immerse the runners in water.
21
USER WARNINGS AND SOUNDS
User warnings – faults
In the unlikely event of a fault occurring, a fault code will be displayed on the internal
control panel and an alarm will sound.
●
●
Please take note of the fault code and contact our Customer Care Centre. Contact
details are located towards the end of the user guide.
To silence the fault alarm press any button on the internal control panel. The fault code
will remain illuminated until the fault is corrected.
Normal Wine Cabinet sounds
Fisher & Paykel Wine Cabinets can produce sounds somewhat different to your old
Wine Cabinet.
●
●
●
●
●
22
Normal operational sounds include:
Fan air flow sounds. Fisher & Paykel Wine Cabinets have fans to circulate the air within
each zone. This is quite normal.
Running/boiling water, gurgling sounds or slight vibrations. This is the liquid refrigerant
circulating in the system.
Clicking sounds. This is the thermostat control and will click when it cycles on and off.
Gasket noises. This normally occurs due to a build-up of dirt and/or grime. It is
recommended to clean the magnetic door gasket every three months to minimise these
noises occurring.
Other sounds may be heard for the following reasons:
– Cabinet not level
– Floor uneven or weak
– Wine bottles not positioned on the shelf correctly.
TROUBLESHOOTING
If there is a problem with your Wine Cabinet, please check the following points before
contacting your local Fisher & Paykel trained and supported service technician or
Customer Care Centre.
Product parts and accessories can be purchased through Fisher & Paykel Customer Care
or online at fisherpaykel.com (this service is available to selected markets only).
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Appliance does
not operate.
Cabinet is in Standby
mode.
Refer to ‘Operating instructions –
Special functions’ section.
No electricity at the
power outlet.
Check the cabinet is correctly
connected and the power is
switched on.
Check another appliance at the same
outlet.
Check the house fuse.
Lights do not
illuminate
when the door
is opened.
Motor operates for
long periods.
Cabinet is not working.
Check the cabinet is turned on at the
wall.
Lights not functioning.
The LED lights cannot be serviced by
the user. Contact your Fisher & Paykel
Dealer or Fisher & Paykel trained and
supported service technician.
The room temperature is
hotter than normal.
Minimise door openings to allow
temperature to stabilise.
Prolonged or frequent
door openings.
Large amount of wine
bottles added.
Wine bottles
appear too warm.
Wine bottles
appear too cold.
Temperature setting is too
low.
Refer to ‘Operating instructions’
and ‘Storing your wine’ sections for
optimal temperature settings.
Door not sealed properly.
Check the cabinet is level and gasket
seals are clean.
Temperature setting not
correct.
Adjust the temperature control to a
colder setting. Refer to the ‘Operating
instructions’ section.
Prolonged or frequent
door openings.
Minimise door openings to allow
temperature to stabilise.
Large amount of wine
bottles added.
Allow time for recently added
wine bottles to reach the desired
temperature.
Temperature setting not
correct.
Adjust the temperature control to a
warmer setting. Refer to ‘Operating
instructions’ section.
23
TROUBLESHOOTING
24
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Unfamiliar noises.
The cabinet is not stable
or level.
Level the cabinet. Refer to the
‘Installation instructions’ section or
refer to ‘User warnings and sounds’
section.
Door alarm sounds
continuously
and a fault code
appears.
This is dependent on the
displayed fault code.
Please take note of the fault code and
contact the Customer Care Centre.
Exterior of cabinet
is warm.
This is normal.
Moisture build-up
on the exterior
appliance
surfaces.
Not unusual during
periods of high humidity.
Wipe dry with a clean, lint-free cloth.
Moisture build up
on the interior
glass door.
Not unusual during
periods of high humidity.
Wipe dry with a clean, lint-free cloth.
Prolonged or frequent
door openings.
Minimise door openings to allow the
temperature to stabilise. Also check
the gasket is sitting flat and sealing
tightly.
Door handle out
of alignment.
With time and usage,
movement may occur.
Refer to ‘Installation instructions’
sections.
Excessive gasket
noise.
May be due to a build-up
of dirt/or grime.
Gasket needs cleaning. Refer to
‘Cleaning care – Exterior’ section.
Door does not
shut properly.
Cabinet not stable or level.
Level the cabinet. Refer to the
‘Installation instructions’ section.
The gasket is dirty.
Gasket needs cleaning. Refer to the
‘Cleaning care – Exterior’ section.
The shelves are out of
position.
Realign shelves. Refer to the ‘Cleaning
care – Interior’ section.
Door obstruction.
Check for obstructions eg protruding
wine bottles, shelves out of position.
MANUFACTURER’S WARRANTY
For the Republic of Ireland and Northern Ireland only. You automatically receive a 2 year
Manufacturer’s Warranty with the purchase of this refrigerator covering parts and labour
for servicing within the country of purchase.
For spare parts, please contact Fisher & Paykel Appliances customer care team. Spare
parts are available for all Fisher & Paykel refrigerators for a minimum period of 10 years
from the date of manufactured.
Fisher & Paykel undertakes to:
Repair or, at its option, replace without cost to the owner either for material or labour
any part of the product, the serial number of which appears on the product, which is
found to be defective within TWO YEARS of the date of purchase.
Note: this Manufacturer’s Warranty is an extra benefit and does not affect your
legal rights.
This Manufacturer’s Warranty DOES NOT cover
A Service calls which are not related to any defect in the product. The cost of a service
call will be charged if the problem is not found to be a product fault. For example:
1 Correcting the installation of the product.
2 Instructing you how to use the product.
3 Replacing house fuses or correcting house wiring or plumbing.
4 Correcting fault(s) caused by the user.
5Noise or vibration that is considered normal, eg drain/fan sounds, refrigeration
noises or user warning beeps.
6 Correcting damage caused by pests, eg rats, cockroaches, etc.
7 Replacement light bulbs.
B Defects caused by factors other than:
1 Normal domestic use; or
2 Use in accordance with the product’s user guide.
C Defects to the product caused by accident, neglect, misuse or ‘act of God’.
D The cost of repairs carried out other than by a Fisher & Paykel trained and supported
service technician or the cost of correcting such repairs.
E Normal recommended maintenance as set out in the product’s user guide.
F Repairs when the appliance has been dismantled, repaired or serviced by other than a
Fisher & Paykel trained and supported service technician or the selling dealer.
G Pick-up and delivery.
H Transportation or travelling costs involved in the repair when the product is installed
outside the Fisher & Paykel trained and supported service technician’s normal service
area.
I Filter replacement except in the case of faulty parts or materials within the filter
cartridge.
J Damage (including water damage) caused by faulty installation or plumbing.
25
MANUFACTURER’S WARRANTY
Nothing in this Manufacturer’s Warranty is intended to, or does, limit any rights you may
have under law to recover the costs of inspecting or returning the goods to us.
This product has been designed for use in a normal domestic (residential) environment.
This product is not designed for any commercial use (whatsoever). Any commercial use
by a customer will affect this product’s Manufacturer’s Warranty.
Service under this Manufacturer’s Warranty must be provided by a Fisher & Paykel
trained and supported service technician (refer to the ‘Customer Care’ section at the
back of this book). Such service shall be provided during normal business hours. This
Manufacturer’s Warranty certificate should be shown when making any claim.
Please keep this user guide in a safe place.
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer
Suburb
Town
Country
26
CUSTOMER CARE
Before you call for service or assistance...
Check the things you can do yourself. Refer to your user guide and check that:
1 Your product is correctly installed.
2 You are familiar with its normal operation.
3 You have read the ‘Troubleshooting’ section at the back of the book.
If after checking these points you still need assistance or parts, please refer to your
nearest Fisher & Paykel trained and supported service technician, Customer Care, or
contact us through our website fisherpaykel.com.
In the United Kingdom if you need assistance…*
Call the Fisher & Paykel Customer Care Centre and talk to one of our Customer Care
Consultants.
Phone: 08000 886 605
Fax: 08000 886 606
Website: fisherpaykel.com
Postal address: Fisher & Paykel Appliances Ltd, Maidstone Road, Kingston, Milton
Keynes, Buckinghamshire, MK10 0BD
In Ireland if you need assistance…*
Call the Fisher & Paykel Customer Care Centre and talk to one of our Customer Care
Consultants.
Phone: 1800 625 174 or 01-8077960
Fax: 1800 635 012
Website: fisherpaykel.com
Postal address: Fisher & Paykel Appliances, Unit D2, North Dublin Corporate Park,
Swords, Co. Dublin
*If you call, write or contact us via our website please provide: your name and address,
model number, serial number, date of purchase and a complete description of the
problem. This information is needed in order to better respond to your request for
assistance.
For product details please refer to the serial plate located on the rear of the cabinet.
Registration
Register your product with us so we can provide you with the best service possible.
To register your product visit our website: fisherpaykel.com
27
EUROPEAN DIRECTIVE 2012/19/EU ON
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
GB This appliance is marked according to the European directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate handling of this
product.
The symbol
marked on the serial plate, or on the documents accompanying the
product, indicates that this appliance cannot be treated as household waste. It shall
be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. Disposal of the appliance shall be carried out in accordance with
the local environment regulations for waste disposal and ensure the refrigerant circuit is
not damaged.
For more detailed information about treatment, recovery and recycling of this product,
please contact your local city office, your household waste disposal service or your
Fisher & Paykel retailer/dealer from whom you purchased this product.
28
FISHERPAYKEL.COM
© Fisher & Paykel Appliances 2022. All rights reserved.
The models shown in this guide may not be available in all markets
and are subject to change at any time.
The product specifications in this guide apply to the specific products and
models described at the date of issue. Under our policy of continuous product
improvement, these specifications may change at any time.
For current details about model and specification availability in your country,
please go to our website or contact your local Fisher & Paykel dealer.
843267G
01.22
">