Smart Watch User Manual
Goodatech®
H30 Smart Sport Watch
User Guide & FAQ
H30
Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and
operating instructions. Please review this manual thoroughly before operating your device. If you have
more questions, please contact us. (Email: [email protected] )
1
Smart Watch User Manual
English Version
1.
Getting Started ................................................................................................................................ 3
1.1 What’s in the box ........................................................................................................................... 4
1.2 What’s in the document .............................................................................................................. 4
2.
Setting up Your Watch ................................................................................................................. 4
2.1 Charging your watch .................................................................................................................... 4
2.2 Precautions....................................................................................................................................... 4
3.
Wearing Your Watch ..................................................................................................................... 4
3.1 All-day wear and exercise ........................................................................................................... 5
4.
Using Your Watch .......................................................................................................................... 5
4.1 App Installation ............................................................................................................................... 5
4.2 Compatibilities ................................................................................................................................ 5
4.3 Pairing the Watch with Your Phone ......................................................................................... 5
4.4 Introduction to Watch Function ................................................................................................ 6
4.4.1 Buttons ........................................................................................................................................... 6
4.4.2 Main interface .......................................................................................................................... 7
4.4.3 Call function .............................................................................................................................. 7
4.4.4 Steps ........................................................................................................................................... 8
4.4.5 Heart rate .................................................................................................................................. 8
4.4.6 Blood pressure ......................................................................................................................... 8
4.4.7 Blood oxygen ........................................................................................................................... 8
4.4.8 Exercise ...................................................................................................................................... 8
4.4.9 Sleep ........................................................................................................................................... 9
4.4.10 Weather: .................................................................................................................................. 9
4.4.11 Message .................................................................................................................................. 9
4.4.12 Music ........................................................................................................................................ 9
4.4.13 Stopwatch ............................................................................................................................. 10
4.4.14 Search .................................................................................................................................... 10
4.4.15 Setting: ................................................................................................................................... 10
5.
FAQ (Frequently asked questions) ........................................................................................ 10
5.1 What application do I need to download & install? ......................................................... 10
2
Smart Watch User Manual
5.2 How to receive the messages/reminder on the watch?.................................................. 11
5.3 Why the watch cannot be searched in the APP ? ............................................................. 13
5.4 Why cannot synchronize with date & time of the phone? ............................................ 13
5.5 Why Facebook, Whatsapp , Instagram have no notifications? ..................................... 13
5.6 Why there is no incoming call alert ? .................................................................................... 13
5.7 How to control & play music MP3 on the watch? ............................................................ 13
5.8 How to sync phone contacts to watch? ............................................................................... 13
5.9 What is the size of the watch band for replacement? ..................................................... 14
5.10 How to set to right time/date ? ............................................................................................ 14
5.11 How to disconnect then re-connect the watch?............................................................. 14
5.12 When does the smart device start counting steps? ....................................................... 15
5.13 How to switch the watch language? ................................................................................... 15
5.14 Why my android phone no reminder & message (unstable)? ................................... 15
5.15 Android’s phone Bluetooth often disconnects or has no message alert after a
period of connection? ....................................................................................................................... 19
5.16 Do I need to keep the phone Bluetooth on all the time when wearing the smart
device? .................................................................................................................................................... 19
5.17 How to sync data? ..................................................................................................................... 20
5.18 How long can the data be kept on the smart device when I don’t carry the
phone around? .................................................................................................................................... 20
5.19 Why is there no weather data appearing or updating on the smart device? ....... 20
5.20 What should I do if the smart device upgrade fails? ..................................................... 20
5.21 The smart device cannot be charged. ................................................................................ 20
5.22 Can the smart device be charged with power bank? .................................................... 21
5.23 Disassembling / assembling Your Watch .......................................................................... 21
5.24 How to use Bluetooth calling function in the watch? .................................................... 22
5.25 How to switch the watch dial faces? ................................................................................... 22
5.26 The watch cannot measure, or the data is not accurate? ............................................ 22
5.27 How to set a weather display? .............................................................................................. 22
5.28 How to check the sleep data? ............................................................................................... 22
1. Getting Started
3
Smart Watch User Manual
1.1 What’s in the box
① Smart watch (H30 with bands)
② Charging cable
③ User manual
1.2 What’s in the document
This manual gets you started quickly with setting up your watch.
Setup ensures that your watch can synchronize its data with the Gloryfit app, where you
can get detailed information on your stats, view sports data, status etc.
As soon as setup is complete, you’re ready to start moving. The remainder of the manual
walks you through every function.
2. Setting up Your Watch
2.1 Charging your watch
Please fully charging your watch before initial use.
① Please use the product-specific magnetic charging into the USB port on your
computer or a UL-certified USB wall charger. ( not exceeding 5V/1A)
② Hold the other end of the charging cable near the port on the back of the watch until
it attaches magnetically.
③ Make sure the pins on the charging cable lock securely with the port. The connection
is secure when the watch vibrates and the battery icon with percent charged appears
on the screen. Operate in strict accordance with the following figures.
2.2 Precautions
① No charging with water stains.
② This product is an electronic monitoring product, not for medical use, and the
measurement data is for reference only.
③ It is not recommended to wear in hot water baths and longtime swimming.
④ Please charge with the matching charging cable.
3. Wearing Your Watch
4
Smart Watch User Manual
3.1 All-day wear and exercise
① For all-day wear when you’re not exercising, wear the device
on your wrist horizontally, a finger’s width below your wrist bone and lying flat, the
same way you would put on a watch.
② For optimized heart rate tracking, keep these tips in mind.
③ Experiment with wearing the watch higher on your wrist during exercise. Because
the blood flow in your arm increases the farther up you go, moving the watch up a
couple of inches can improve the heart rate signal. Also, many exercises such as
bike riding or weight lifting require you to bend your wrist frequently, which is more
likely to interfere with the heart rate signal if the watch is lower on your wrist.
④ Do not wear your watch too tight. A tight band restricts blood flow, potentially
affecting the heart rate signal. This being said, the watch should also be slightly
tighter (snug but not constricting) during exercise than during all-day wear.
4. Using Your Watch
4.1 App Installation
① Use the watch with our customized Gloryfit app. You can download Gloryfit from
Apple Store/Google Play or scan the QR codes below to download.
4.2 Compatibilities
① The Gloryfit app is only compatible with smartphones, not tablets or PCs.
② Smartphone operating system should be iOS 9.0 / Android 5.0 or higher; Bluetooth
version should be 4.0 or higher.
4.3 Pairing the Watch with Your Phone
① Please pair the watch with your phone in the Gloryfit app.
② NOT in the Bluetooth settings of your phone.
③ Enable the Bluetooth of your smartphone.
5
Smart Watch User Manual
④ Before using the APP, please turn on the mobile phone Bluetooth and mobile
phone GPS positioning to obtain the mobile phone positioning permission.
⑤ Open the Gloryfit app on your smartphone and go to the "Device" page, tap "Bind
Device", then your smartphone starts searching devices. After the connection is
successful, it will prompt “To pair with : H30”, please select pairing. (If your phone
failed to find H30, please search the watch on your smartphone again.)
⑥ Please see the connection operates as follows:
Notes:
① Once the watch is connected to your app, the watch will automatically search and
reconnect itself if the connection is lost or when Bluetooth is restarted after
manual disconnection.
② If the watch is unbound from the app, the information on the watch will be reset,
and the information on the app will be cleared. Please do not unbind the
connection unless there is an issue that will require a reset.
③ The watch can only pair with one smartphone at a time. When pairing, please
ensure the watch and your smartphone is within 0.5 meters distance.
4.4 Introduction to Watch Function
4.4.1 Buttons
6
Smart Watch User Manual
4.4.2 Main interface
Display the current time, date, steps, and other information of the watch; press the main
interface for a long time to switch the main dial left and right, and click to confirm.
4.4.3 Call function
Click the call switch. Open the phone settings – Bluetooth -search connection Bluetooth
H30-xxxx to play mobile music or make/ receive calls
7
Smart Watch User Manual
4.4.4 Steps
Display current steps, distance, and calories of the watch.
4.4.5 Heart rate
Slide to this page and keep a while and automatically measure the current real-time
dynamic heart rate. Connect to APP to set real-time monitoring and view data records.
4.4.6 Blood pressure
Slide to this page and keep a while and auto measure the current blood pressure data and
vibrate to indicate the result. Connect to APP to view the watch offline measurement data
or online measurement synchronously.
4.4.7 Blood oxygen
Slide to this page and keep a while and automatically measure the current blood oxygen
data and vibrate to indicate the result.
4.4.8 Exercise
Click on the icon on this page to access the multiple sport modes option. Select a sport
mode, click the icon to start, and slide right to pause or stop the sport.
8
Smart Watch User Manual
4.4.9 Sleep
The bracelet can record and display your sleeping time last night, and the time of deep
sleep and light sleep. More detailed data can be viewed synchronously in the APP.
4.4.10 Weather:
Display the local weather conditions. Connect the synchronization APP for normal use,
and open the phone GPS to ensure that the APP gets the positioning permission
function and network connection.
4.4.11 Message
The watch can receive cell phone calls, SMS, Facebook, Wechat, QQ, Twitter and other
notification alerts, which can be set according to the message alert and turn on the
corresponding push switch on the APP. This page can store up to 8 message records. This
function needs to stay connected with the phone and make sure the APP gets the
corresponding permission.
4.4.12 Music
After connection the APP, the watch can control the mobile phone player to
play/pause/switch to the previous song and the next song. This function must be
opened on the mobile phone player before it can be controlled on the watch. This
function requires staying connected to your phone and turning on the notification push
permission.
9
Smart Watch User Manual
4.4.13 Stopwatch
Click on the icon to start the function, and click start for timing, pause or reset. Slide right
to leave.
4.4.14 Search
Click this icon, your phone will beep to indicate the orientation of your phone, this function
requires your phone to stay connected with the watch APP. No alert on the phone in silent
mode.
4.4.15 Setting:
Click on the icon to start the function, switch left and right to set the brightness
adjustment, factory data reset, turn off the watch and view the watch information.
5. FAQ (Frequently asked questions)
5.1 What application do I need to download & install?
① Step 1: Turn on the phone's Bluetooth
② Step 2: Search “Gloryfit” in the Google play or App store or Scan QR code to
download the APP
③ Step 3: Open the “Gloryfit” App, and click the “Device” icon on the bottom, then
follow the wizard to set up
10
Smart Watch User Manual
Note:
① In the watch, there is a QR code ,it only uses for downloading the APP, NOT for
device pairing!!
② Do not connect the watch directly in Bluetooth list.
5.2 How to receive the messages/reminder on the watch?
① If you have allowed all permissions when installing the app, please open the app
GloryFit - >Device - > App Reminder - > Turn on the app you want to receive
notifications. You will receive message notifications.
② If you did not allowed all usage permissions when installing the app, there are 2
settings that you can follow to receive the messages:
The 1st way:
Please uninstall and reinstall the app, and allow all usage permissions, click Device
11
Smart Watch User Manual
- > App Reminder - > Turn on the app you want to receive notifications, and you
will receive message notifications.
The 2nd way:
For Android phone users, you need to allow the app to run in the background
firstly, and follow the below steps, then repeat the above steps to ensure that you
can receive messages.
For iPhones users, you need to turn on Share System Notifications in the
iPhone's Bluetooth, and follow the below steps, then repeat the above steps to
ensure that you can receive messages.
Mobile phone Settings - > Bluetooth - > Share system Notifications, then allow
notifications, finish setup.
Note:
The watch only can display the message content displayed in the mobile phone
message notification bar. Please make sure you set the message preview on
your phone so that you can view the messages on your phone.
Moreover , there are other reasons:
① Check if the device turns on the “Do Not Disturb” mode (some devices feature this
function).
12
Smart Watch User Manual
② For the Android device ,please check if the app has been added to the whitelist; open
the backend permissions (in terms of some mobile phones, you need to enable the
following settings, such as “allow self-starting”, “auto-start management”, “allow
back-end activities”, “lock a drop down at the back-end”, “unlimited use time”, “auto
start apps”, “allow system to wake up”, “close frozen apps”.
5.3 Why the watch cannot be searched in the APP ?
① Make sure your phone’s Bluetooth and phone GPS positioning are turned on before
using it for the first time.
② Users need to open the APP to obtain positioning permission (Phone Settings
->Applications) .
③ If the watch has already been paired with a Bluetooth connection in the phone,
please cancel the pairing first and then search for the connection in the APP.
④ If the watch is not used for a long time, the Bluetooth will go into a dormant state.
Please turn off the Bluetooth of the watch and the phone, reopen it after about 1
minute, and try to search connection in the APP again.
⑤ The watch must be connected to the APP, otherwise, the steps, sleep, time, and
other function will not work properly.
5.4 Why cannot synchronize with date & time of the phone?
Please see FAQ 5.2 & 5.3
5.5 Why Facebook, Whatsapp , Instagram have no notifications?
Please see FAQ 5.2 & 5.3
5.6 Why there is no incoming call alert ?
Please see FAQ 5.2 & 5.3
5.7 How to control & play music MP3 on the watch?
① Please make sure the Bluetooth connection is OK.
② Open the music app on your phone.
③ Click Music application on the watch, you can
switch songs and adjust volume directly with the watch.
④ You can also choose or change the playback device
(Enter the phone Settings -> Bluetooth - > H30 - > Turn off/on Media
audio.)
.
5.8 How to sync phone contacts to watch?
Please refer to the steps below:
① Step 1: Open your mobile phone’s Settings, enter “Bluetooth”
② Step 2: Find the connected device, click the right corner icon.
13
Smart Watch User Manual
5.9 What is the size of the watch band for replacement?
① The size between the two lugs : 22mm.
5.10 How to set to right time/date ?
① After the watch is connected to Bluetooth & paired successfully, it will auto-sync
with your mobile phone’s time/date.
5.11 How to disconnect then re-connect the watch?
① Open the “Gloryfit” APP.
② Enter “Device” menu, scroll down, then click “Unpair”
③ For iPhone, try to ignore the device in the Bluetooth settings.
Setting path : System settings -> Bluetooth ->Tap the icon on the right ¡
- >Ignore this device.
14
Smart Watch User Manual
④ If your iPhone is bound with too many Bluetooth devices, please ignore a few
devices in the system Bluetooth settings.
Note:
If the problem can’t be resolved through the above troubleshooting steps, it is
recommended to restart your mobile phone.
5.12 When does the smart device start counting steps?
① In order to identify daily behavior and improve the accuracy of step count, realtime steps can only be counted when you walk more than 10 consecutive steps
(20 steps at night).
5.13 How to switch the watch language?
① Open the GloryFit app, click Device → More settings → Device
language → select the language you want.
5.14 Why my android phone no reminder & message (unstable)?
Android can’t run in the background for a long time
① Restricted by Android system, the incoming call alert, notifications and GPS sports
functions may not work normally when current app is running in background. It is
required to enable the system permission of power consumption protection and
autorun.
② Power consumption protection setting
For Android 6.0 has updated its mode of power management, when user has no
interaction with current app, the system will determine whether current app is nonactive and judge whether to clean current app to extend battery-life. If you want to
use current app for a long time without being cleaned up, you should set up power
consumption protection.
③ Take OPPO HUAWEI SAMSUNG for example.
(OPPO) – Setting- > Battery -> Power consumption protection -> current app - >
Allow running in background.
15
Smart Watch User Manual
(HUAWEI) – Setting- > Battery -> Clean application when locking screen -> current
app - > Not clean.
(SAMSUNG) – Setting- > General - > Battery management – Unmonitored
applications ->Add current app.
④ Autorun settings
If there are too many applications running in the same time period on mobile
phone, they will occupy more and more resources, thus causing system
breakdown. To save memory and ensure the fluidity of system, Android system will
clean up the current app. If you want to use current app for a long time without
being cleaned up, you should set up autorun.
⑤ Take OPPO HUAWEI SAMSUNG for example.
(OPPO) – Setting- > Application management -> current app -> allow running in
background - > Enable.
(HUAWEI) – Setting- > Application management -> current app -> Permission - >
Set up individual permission - > Application autorun.
(SAMSUNG) – Setting- > Battery - > Intelligent Manager- > Autorun application – >
Management autorun -> current app ….
Please see more setup steps
For Android System phones
① In Settings - > Apps
16
Smart Watch User Manual
② Enter Battery usage details
17
Smart Watch User Manual
For iPhone System phones
① In Settings - > Apps
18
Smart Watch User Manual
5.15 Android’s phone Bluetooth often disconnects or has no message
alert after a period of connection?
Please see FAQ 5.14
5.16 Do I need to keep the phone Bluetooth on all the time when
wearing the smart device?
① You don’t need to keep the Bluetooth on in the following functions: steps, sleep
monitoring, heart rate detection, stopwatch, alarm clock, sedentary reminder. Just
wear a device when doing workout, and open the app after you complete the
workout. The smart device and the mobile phone will be automatically connected,
and you can view the data after sync is finished.
② Regarding the functions of call reminders, app notifications, find mobile phones,
find smart device, etc., it is required to keep connected with the device, and leave
the phone Bluetooth turned on all the time.
19
Smart Watch User Manual
5.17 How to sync data?
① When the Bluetooth on the phone is turned on, it will automatically connect to the
smart device for data synchronization when the app is opened, and you can
manually sync the data in the drop-down list of app main interface.
② If the connection fails during synchronization , please try to following methods:
Firstly, you can pull down the main interface to perform manual synchronization. If
failed, please kill or force quit the app in the back-end, and restart the app.
③ If you still can’t sync data, please turn off your mobile phone Bluetooth or restart
your phone.
5.18 How long can the data be kept on the smart device when I don’t
carry the phone around?
① The smart device can save data separately, so you don’t have to carry your phone
while you run. When you need to sync data, just turn on Bluetooth on your phone,
open the app and get close to the device to make it automatically connect.
② The smart device can retain up to the last days of data.
5.19 Why is there no weather data appearing or updating on the smart
device?
Some devices support weather forecast function.
① The device itself does not automatically update the weather data. After connecting
the device to the app, the app will automatically sync the weather data. You can
update it by following the steps below:
② Adjust your app permission settings: allow app location and internet connection.
③ You can manually pull down the sync data on the app homepage. When the data
synchronization is completed, the weather data can be synced to the smart device.
(Tap the weather interface to check if weather data is available)
5.20 What should I do if the smart device upgrade fails?
① Make sure that the battery level is higher than 50% when upgrading the smart
device. If the battery level is below 50%, the smart device can’t be upgraded.
② If the smart device upgrade fails, the app will automatically reconnect. If the
automatically connection does not work, you can pull down on the homepage to
perform manual synchronization. It will automatically reconnect the smart device.
③ For some devices, there will be two minutes of wait time (the smart device has no
response during this period). But it will automatically reconnect later.
5.21 The smart device cannot be charged.
① Firstly, make sure that the USB interface (PC or other power supply ) is powered
properly.
② Check if the USB connector is plugged in backwards.
20
Smart Watch User Manual
③ Whether there is any dirt or corrosion on the charging port. Make sure the USB
connector is securely connected to the power adapter.
④ When the power of the device is extremely low, it takes about 2 minutes to display
the charging status or respond.
5.22 Can the smart device be charged with power bank?
① Not applicable.
② Since the power bank is mainly designed for charging mobile phone ,its charging
current is about 1A. When the mobile phone is fully charged, it enters a trickle
charging state, and the charging current will become very small. At this time, some
power banks will automatically shut off to save the power.
③ The charging current of smart device is relatively small, which may cause a
mistaken detection by the power bank that mobile phone is fully charged.
Thus , it turns off the output and the smart device cannot be charged.
5.23 Disassembling / assembling Your Watch
If you want to replace other watchband with 22mm width
Disassembly
① To remove the wristbands ,turn over the watch and find the quick-release lever.
② While pressing the quick-release lever inward, gently pull the wristband away from
the watch to release it.
③ Repeat on the other side.
Assembly
① To reattach the wristbands, slide the pin (the side opposite the quick-release lever)
into the notch on the watch. Attach the wristband with the clasp to the top of the
watch.
② While pressing the quick-release lever inward, slide the other end of the wristband
into place.
21
Smart Watch User Manual
③ When both ends of the pin are inserted, release the quick-release lever.
5.24 How to use Bluetooth calling function in the watch?
Make sure the watch connected with the app & Bluetooth.
① Swipe right on the homepage of the watch and click the Call function - > click
Switch to turn on/off the Bluetooth call function at any time.
② Click Device - > Bluetooth Call - > Sync Contacts - > Open in the app, you can
sync your contacts to your watch.
③ You can click Dials directly on the watch, or you can directly tap the Call log or
synchronized Contacts on the watch to make calls.
5.25 How to switch the watch dial faces?
① Please long press the watch’s home screen, swipe right/left to choose the watch
face you like.
② Swipe right on the watch’s home screen, click Setting - > Watch face - > you can
choose the watch face you like.
③ In the Gloryfit APP, click Device - > Watch faces - > you can download and set
the watch faces you like.
④ Moreover, you can click the image in Custom dial to custom your watch face.
5.26 The watch cannot measure, or the data is not accurate?
① Sit down before the measurement and put your body in a relaxed state with your
arms level with your chest position.
② Adjust the tightness of the watch. The back of the watch should be close to the
skin to prevent light leakage from the photoelectric sensor.
③ Keep your body calm during the measurement. Talking/coughing/sneezing and
other movements will affect the accuracy of the measurement results.
5.27 How to set a weather display?
① Please make sure the Gloryfit can access your location.
② Swipe right on the watch’s home screen, click Weather, you can view the
weather for the day, then swipe up and you can view the weather for the next six
days.
5.28 How to check the sleep data?
① First ,need to fill in the gender, age, height, and weight information in the App.
22
Smart Watch User Manual
② Wear the watch two fingers away from the wrist bone when you sleep.
③ You can view your deep sleep, light sleep on the watch.
④ You can click Sleep in the app to view the sleep data of the day, week, month.
23
">
